DENSITY & CONCENTRATIONDensity is a critical part and an important parameter for quantitative andqualitative process control of a given liquid.
LEMIS process offers the way to optimize your costs without saving on accuracy and repeatability of your measurements!
IN PROCESS TO EXCELLENCE WITH
LEMIS PROCESS
Today the role of efficient control of the processes is highly important. Continuous monitoring optimizes, controls and manages the processes. Nowadays it is not enough to use just high accurate equipment.
LEMIS Process offers a turnkey solutions for your process industry, providing many advantages to you as a customer. An individual approach, flexibility, tailored to your process solutions.
We have a large range of Density, Viscosity, Level, Flow measuring equipment for separate or combined applications.
Various measurements – one solution!
Briefly about companyLEMIS process is located in EU(Riga, Latvia), USA (The Woodlands, TX) and India (Navi Mumbai)
1200 m2 facility in Riga, LATVIA
Complete cycle from conception anddevelopment to manufacturing,assembling, testing and shipment
ISO 9001: 2000 certified
Strong sales organization takes out products sales and support worldwide
API
Baume
BRIX
SG 15, 20 C; 15 F
%H2SO4
PROOF
CUSTOM
PEr
rES
%ALC/V
%ALC
%ALV/W
PLATO
Density & Concentration Meters
DC-40 SERIES DC-50 SERIES DC-30
DM-250.1 DM-250.2 DM-250.3
Unique resonant tube technology
The LEMIS process sensor comprises of a vibrating tube sensor, drive electronics and signal processing electronic.
ü Cylinder shape has symmetric geometry
ü Repeatable mechanical manufacturing
ü Repeatable metal structureü Low own mass of the sensorü Washed on either side by
measured liquid eliminates pressure effect
ü Allows both density and viscosity measurement
ü Ni-Span-C material offering low temperature expansion factor
Resonant tube advantages
CONTINUOUS CONTROL METERSIN-TANK MEASUREMENTSDC- 40 SERIES:
F-type,
Installation pack:
Immersion on flexible hawser
R-type,
Installation pack:
Long rigid
immersion
D-type,
Installation pack:
Direct insertion
DC-40 installation model
LOW FLOW RATE CONTINUOUS CONTROL METER DC-30 SERIES
Resonant tube
Measuring chamber
Output and input
DC-30 Inside profile DC-30 is wall-mounted device
CONTINUOUS CONTROL METERSIN-LINE MEASUREMENTS
DC-50 SERIES
G-type
S-type
T-type
DC-50 G-type installation model
PORTABLE METERS
DM-250.1
DM-250.3
DM-250.2
Forget Sampling for DM-250.1and DM-250.2!
Quickly measures density of a liquid product in tank.
Measures level of liquidproducts in the tank.
They’re economical and easy to operate.
Calibration couldn’t besimpler just use distilled water.
Select a DM version according to the
testing depths yourequire.
DM-250.1 plunges to 6 meters, while DM-250.2 reportsreal density and temperature measurements at 30
meter depths in seconds.Measures highly viscous liquids up to 1200 cP.
Calibration
Calibration of LEMIS process is
performed in-house according
ISO9001:2000 quality
assurance program by using
calibration materials that are
traceable to national standards.
In-house calibration and testing
is performed specified
dedicated calibration protocol
for every standard model of the
sensor. For most applications,
on-site calibration is generally
not required. LEMIS process
sensors allows simple, switch-
and-go field installation.
Spot density or density/level profile in storage tanks
Products consistency and adulteration check
Density and level control at outlets and delivery points
Level gauges calibration
In-tank blending and mixing control
Molasses density control in ethanol production
Food, milk and diary products
% alcohol check in beverages industry
Petroleum products, fuels, lubricants
Applications
AdvantagesContinuous measurements
Easy cleaning
High accuracy
Simple installation
Suitable for very viscous liquids
Wide range of applications
Rigorous factory calibration
Automatic temperature compensation
Compact design
Operating ranges
Density:0.5 to 2000 kg/m3 (4.2 to16.7 lb/gal US)
ProcessTemperature:-200°C to +200°C (-328°F to +392°F)
Accuracy
Density:±0.2 kg/m3 (±0.0017 lb/gal US)±0.5 kg/m3 (±0.0042 lb/gal US)±1.0 kg/m3 (±0.0083 lb/gal US)
Temperature:±0.1°C (±0.2°F)
Thank you for Your attention !