D3OTHE LAB
7-8 COMMERCE WAYCROYDON
CR0 4XAUK
©2018 Design Blue Limited. All rights reserved.*Passes EN ISO 15025:2002 requirements. Clause 8.1.2 Limited flame spread Procedure A Surface Ignition. **Tested to ISO 4649:2010 despite no pass/fail requirements. However, results meet the requirement of ISO 20345:2011 when compared. ***Conducted using internal test method DTS015 (designed to replicate EN 863) with LP2 knee sample included. Level 1 Penetration requirements of EN 14404:2010 met. Values shown represent typical product characteristics . For full details including material properties and product tolerances, please request SOQ document from D3O representative. The information provided is not intended to and does not create any warranties, expressed or implied, including any warranty of merchantability of fitness for a particular purpose. This data sheet shall not be reproduced or amended without the written consent of Design Blue Limited TRUSTED IMPACT PROTECTION™
www.D3O.com
For more information on the D3O® TRUST Vest, please contact your D3O Business Development Manager
DETACHABLE OUTER SHELL WITH QUICK-FASTENERS
HARD SHELL PROTECTS FROM PUNCTURE AND BLUNT IMPACTS
PAD INTEGRATION EXAMPLE
D3O® unique patented and proprietary technologies provide both enhanced protection, versatile and flexible materials for a host of shock absorption and impact protection applications.
The Trauma Reduction and Unrivalled Shock Technology (TRUST) Vest represents an evolution of the D3O offering. Combining new materials and technologies, this protective undergarment boasts a lightweight, low profile base layer of blunt trauma protection.
Developed to pass the 20/07:HOSDB Blunt Trauma Protector standard, the TRUST Vest combines unrivalled flexibility with enhanced protection powered by D3O®.
D3O recognised a market need for a protective garment aimed at minimizing the risk of injury to the limbs and torso from low velocity blunt trauma impacts, such as those caused by hand thrown missiles and hand wielded weapons.
The lightweight and breathable TRUST Vest is powered by D3O® technologies and perfectly balances a low profile system that still provides the user with confidence that they are wearing the ultimate in impact protection.
PRODUCT FEATURES• Features D3O® proprietary technology• Tested to 20/07:HOSDB standard• Features a flame resistant fabric• Advanced impact protection• Fully breathable• Low profile
D3O® TRUST VESTD3O® TRUST VEST
PADS INTEGRATED INSIDE GARMENT
GEOMETRY ALLOWS ULTIMATE COVERAGE
D3OTHE LAB
7-8 COMMERCE WAYCROYDON
CR0 4XAUK
©2018 Design Blue Limited. All rights reserved.*Passes EN ISO 15025:2002 requirements. Clause 8.1.2 Limited flame spread Procedure A Surface Ignition. **Tested to ISO 4649:2010 despite no pass/fail requirements. However, results meet the requirement of ISO 20345:2011 when compared. ***Conducted using internal test method DTS015 (designed to replicate EN 863) with LP2 knee sample included. Level 1 Penetration requirements of EN 14404:2010 met. Values shown represent typical product characteristics . For full details including material properties and product tolerances, please request SOQ document from D3O representative. The information provided is not intended to and does not create any warranties, expressed or implied, including any warranty of merchantability of fitness for a particular purpose. This data sheet shall not be reproduced or amended without the written consent of Design Blue Limited TRUSTED IMPACT PROTECTION™
www.D3O.com
D3O® TRUST VEST
D3O® TRUST Vest - Product Details
Product Name D3O® TRUST Vest XS D3O® TRUST Vest S D3O® TRUST Vest M D3O® TRUST Vest L D3O® TRUST Vest XL D3O® TRUST Vest XXL
Product Code 12350 12351 11748 11749 11750 12352
Armpit to Armpit 46 48 50 52 54 56
Collar Part 11526 11526 11526 11526 11526 11526
Arm part 12218 12218 12217 11751 11751 11751
Tested to 20/07: HOSDB(Average of bar & wedge UPL)
UPL
Bar
Wed
ge
14
12
10
8
6
4
2
0
UPL Limit
D3OTHE LAB
7-8 COMMERCE WAYCROYDON
CR0 4XAUK
©2018 Design Blue Limited. All rights reserved.*Passes EN ISO 15025:2002 requirements. Clause 8.1.2 Limited flame spread Procedure A Surface Ignition. **Tested to ISO 4649:2010 despite no pass/fail requirements. However, results meet the requirement of ISO 20345:2011 when compared. ***Conducted using internal test method DTS015 (designed to replicate EN 863) with LP2 knee sample included. Level 1 Penetration requirements of EN 14404:2010 met. Values shown represent typical product characteristics . For full details including material properties and product tolerances, please request SOQ document from D3O representative. The information provided is not intended to and does not create any warranties, expressed or implied, including any warranty of merchantability of fitness for a particular purpose. This data sheet shall not be reproduced or amended without the written consent of Design Blue Limited TRUSTED IMPACT PROTECTION™
www.D3O.com
ARM PADS COLLARBONE PADS
D3O® TRUST VEST COMPONENTS
Tested to 20/07: HOSDB(Average of bar & wedge UPL)
UPL
Bar
Wed
ge
14
12
10
8
6
4
2
0
UPL Limit
Product Name TRUST Vest Collar TRUST Vest Arm S TRUST Vest Arm M TRUST Vest Arm L
Product Code 11526 12218 12217 11751
Material Code SF 005 SF 005 SF 005 SF 005
Dimensions (mm) 400 x 111 297 x 150 325 x 150 350 x 150
Thickness (mm) 10 10 10 10
Weight (g) 198 188 205 220
D3O® TRUST Vest Components - Product Details
179
150
349
11
129
400
9
23