ACCESSORIESAdapter: Allows both straight and tapered Flush-Type dressers to be used with drillpresses, portable or right-angle drills.Threaded 3/8" - 24.

Stud ShankFor use with any extended series chuckor adaptor.

Guide RingsGuide Rings are used to guide on theoutside diameter of the electrode tobe dressed. Guide Rings are used withC-01 Chucks, N-01 Nuts, and BE TypeBlades. R-01 Rings are to be used with5RW (.625) and 16mm diameterelectrodes. R-02 Rings are for .482diameter electrodes. R-02A Rings arefor .500 and 13mm electrodes.Extended Guide Rings are used whendressing long pointed type electrodes orwhen you need to make sure the top ofthe electrode is perpendicular to theside of the electrode. Use R-07Extended Guide Rings with 5RW (.625)and 16mm diameter electrodes. R-08Extended Guide Rings for .482 diameter electrodes. Use R-08-x13Extended Guide Rings for .500 and13mm electrodes.

Special BladesIn addition to the partial listing of ourstandard blade shapes shown we regularly manufacture blades for nonstandard electrode shapes, we are hereto help solve your dressing problems.

Pneumatic Tools and Other ProductsPlease contact us for more detailedinformation.

Dressing with a pneumatic tool.

Drill press with Extended Series.

Lathe with Large Extended Series.

Stud Shank - SS-01

Tips can be preciselydressed in seconds, eitheronline or offline, usingeither our flush, extended,large extended or flushstyle cutters.

Adapter AD -01

Producing a line of

cutting tools that have

been proven for over 50

years, Electrode Dressers

supplies blades that result

in increased productivity

through decreased

downtime, plus tremendous

cost savings through

reduced energy

consumption. A major

supplier to the automotive

companies and their

suppliers, appliance

manufacturers, office

furniture manufacturers,

the aeronautical industry,

and other industries

utilizing spot welding.

Electrode Dressers offers

a huge assortment of

cutter blades in many

distinct styles including

cutters for Robotic Systems.

Offset ElectrodesUntil Electrode Dressers developedthis unique system, offset electrodeswere almost impossible to dress –resulting in a high and constantreplacement cost. Now offset electrodes can be dressed quickly, easily, efficiently... offering substantial savings in offset electrode replacement costs.

Electrode Dressers has applied over 50 years of experiencetoward the design and development of a full line of cutters forrobotic spotwelding systems. As a supplier to the automotiveindustry, appliance manufacturers, office furniture manufacturers,the aeronautical industry, and other industries utilizing spot welding. Our attention to quality and dedication to service makesthe cutters from Electrode Dressers the best in the industry.

REQUIRED PARTS:Guide Sleeve

Collar

OS-01OS-02

Chuck

C02-EC02-E

Nut

N-04N-04

Blade No.

BO-01 (4RW)BO-02 (5RW)

R-07

CUTTERS FOR ROBOTIC SYSTEMS

Stud Shank

SS-01SS-01

R-08

POTWELDING

ONSULTANTS

NC.

Contact Spotwelding Consultants �for additional information and pricing.

(888) 255-6780 toll free order line

(972) 475-0874 phone�(972) 475-5024 fax4209 IndustrialRowlett, Texas 75088

DRESS WORN ELECTRODETIPS QUICKLY, EASILY, AND

ECONOMICALLY...ASSURINGUNIFORM WELDS AND

EXTENDED LIFE