Technical Data reflects results of laboratory tests and is intended to indicate general characteristics only. Since many actual application circumstances are beyond Chesterton's knowledge and/or control, the product user must determine the suitability of the products it intends to use for its particular purpose and assume all risks and liabilities in connection therewith. CHESTERTON DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Form No. 071541 1/18
860 Salem Street, Groveland, MA 01834 USA978-469-6888 www.chesterton.com© 2018 A.W. Chesterton Company ® Registered trademark owned by A.W. Chesterton
Company in USA and other countries, unless otherwise noted.
622 WHITE GREASE
PRODUCT DATA SHEET
APPLICATION AREAS
• Bottle Filling Machinery
• Bearings
• Pistons
• Conveyors/Rollers
• Guides/Slides
KEY FEATURES AND BENEFITS• Excellent water resistance• PTFE fortified• NSF H1 - Registration number 133929• Conforms with FDA regulations 178.3570
and 177.1550 for food machinery use
PACKAGING400g900g18kg55kg
DIRECTIONSApply with a grease gun, or brush on for local applications. Before using, wipe grease fittings to remove contamination. Keep grease container closed when not in use. Reapply at regular intervals.
DESCRIPTIONChesterton® 622 White Grease is a pure mineral oil grease with PTFE added designed for applications where a clean, nonstaining, food grade lubricant is required. It is a superior, multi-purpose product that conforms with FDA regulations 178.3570 and 177.1550 for food machinery use and it is NSF registered as an H1 lubricant. It is a long lasting, non-hardening lubricant that withstands washout from water, steam, food or fruit juices. Chesterton 622 White Grease is virtually tasteless and odorless. When used on food processing equipment, users can be assured that the lubricant will not contaminate finished products. It is widely used for textile machinery and paper converting machinery as it aids in quality control and minimizes rejects.
TYPICAL PHYSICAL PROPERTIES
Appearance Snow white
Consistency, NLGI 2
Texture Buttery
Thickener Aluminum complex
Density 0,9 kg/l
Dropping Point (ASTM D 2265) 245°C (473°F)
Penetration (ASTM D 217) 265-295
Four Ball Wear Test (ASTM D 2266) Scar diameter 0.61 mm
Four Ball Wear Test (ASTM D 2596) Weld 250 kg (551 lbs) Load Wear Index 41
Operating Temperature (above 170°C, increased lubrication frequency is required) -23°C (-10°F) to 170°C (338°F)
Water Washout (ASTM D 1264) @ 80°C 2.45%
Base Oil Viscosity (ASTM 445) @ 40°C 100 cSt @ 100°C 12 cSt LWI 95
Before using this product, please refer to Safety Data Sheet (SDS).