Transcript
  • Cerna Series Microscopy Platform

    www.thorlabs.com

    Cerna Rig CRE1005With a platform for micromanipulators

    and double camera port, this microscope combines confocal and electrophysiology capabilities on an

    upright Cerna microscope.

    Cerna Rig CRE1003This configuration is designed for electrophysiology experiments and includes rigid stands for micromanipulators.

    Cerna Rig CRC1002This confocal microscope uses a Nikon dual camera port and fast XY Scanning stage.

    Cerna Rig CRF1001The CFB1500 500 mm Tall Microscope Body is designed to support setups for intrinsic signal imaging.

    Cerna Rig CRW1003This widefield imaging microscope

    includes a module for Dodt contrast imaging.

    Cerna Rig CRF1002This intrinsic imaging rig uses microscope movers to translate the field of view over a

    stationary sample.

    Turret

    FocusModule

    ThorlabsNosepiece

    DIC-CompatibleNosepiece

    (Required for DIC in

    Step 11)

    Requires CSA1100, CSN1301, CSN1302, or CSN1201 from Step 5

    WFA2001 Epi-Illuminator

    CSA1200Sliding

    Nosepiece Arm

    CSA1100 Single

    Objective Arm

    CSA2100 SM2, 60 mm

    Cage Arm

    CSA1003Cerna 60 mm Cage to D1N Dovetail Adapter

    CSN1201 Single Objective

    Nosepiece

    MCWHL5Cold White LED

    M565L3Lime (565 nm) LED

    MWWHL4Warm WhiteLED

    M470L3Blue (470 nm) LED

    Mounted High-Power LEDs (Designed for WFA2001,

    Other Wavelengths are Available)

    LEDs

    Lamps

    HPLS243Solid State Plasma

    Light Source

    XCITE200DCDC-Stabilized FluorescenceLight Source

    XCITE120LEDHigh-Power, Broad-Spectrum LED (Only Compatible w/ CSE1000)

    SOLIS-1AHigh-Power LEDfor Microscopy,

    6500 K (OnlyCompatible

    w/ CSE1000)

    CSA3000(/M)Breadboard Top

    CSA3010(/M)Slim Breadboard Top

    OPX2400(/M)Optical Path Conversion Kit

    CSE1000 Epi-Illuminator

    w/ Turret

    CSN1202Sliding

    2-Position Nosepiece

    CSD1002Y-IDP Double Port

    CSD1001FN-DP Variable MagnificationDouble Port

    CEA1400400 mmTall Body

    CEA1600600 mm

    Tall Body

    CFB1500500 mm Tall

    FunctionalImaging

    Body

    CEA1500500 mmTall Body

    WidefieldIllumination

    Used forDouble-CameraConfigurations

    and Confocal Rig

    Epi-IlluminationPaths

    DIY Paths

    Step 3:Double

    CameraPort

    Step 4:Epi-

    IlluminationModule

    Step 5:Objective

    Holder

    Step 6:Piezo Stage for Fast Z-Stacks

    CSA1300Thorlabs SlidingNosepiece Arm

    CSN1301Manual 2-Position

    NosepieceCSN1302

    Motorized 2-PositionNosepiece

    CSA1400Turret

    Mounting Arm

    MOT1500Manual 5-

    Position TurretN4X-PF

    *Other Upon

    RequestN10X-PF N20X-PF N40X-PF N60X-PF

    Step 7:Objective

    MMP-2XYXY Mover forMicroscope

    Body

    PLS-XY1" XY Stage

    PLS-X1" X-Axis Stage

    CEA1350350 mm

    Tall Body

    Step 1:Body Height

    Step 11:Condenser

    Step 12:CondenserMounting Module

    Step 14:DIC Components

    Step 2:Widefield

    Viewing Accessory

    WithoutTrinoculars

    SM2-SeriesThread

    Nikon Trinoculars w/ Eyepieces & IR Filter (WFA4000) or w/out IR Filter (WFA4001)

    WFA4107Nikon TI-3

    Tube &C-MountAdapter

    Nikon Erect Image Trinocw/ Eyepieces & IR Filter(WFA4002) or w/out IR

    Filter (WFA4003)

    WFA4108Nikon TI-3

    Tube &0.7X C-Mount

    Adapter

    WFA4105Nikon Y-TV

    Tube & C-Mount Adapter

    1500M-GE1.4 MP Scientific Camera

    4070M-GE4 MPScientific Camera

    8050M-GE8 MPScientific Camera

    340M-GEFast Frame Rate Scientific Camera

    WFA4106Nikon Y-TV Tube & 0.7X

    C-Mount Adapter

    WFA41020.5XCamera Port

    WFA4110Cerna Tube Lensin SM2 to D1N

    Dovetail Adapter

    WFA4111Cerna SM2 to D1N Dovetail

    Adapter

    WFA41010.75XCamera Port

    WFA41001X Camera Port

    PMP-2XY(/M)XY Manipulator

    Platform

    PMP1000(/M)Manual XY

    Manipulator Platform

    MCM30013-Axis Controller

    for PLS and ZFM Stages

    MCM30023-Axis Controller

    for MMP and PMP Stages

    Step 10:Translation Stage

    Step 9:Controller

    Polarizers & Prismsfor DIC Condenser

    DIC Objective Slider (Choose

    One Compatible w/ Your Objective)

    DIC CondenserPolarizers

    DIC CondenserPrisms

    WFA3100FN-PT Polarizer Turret for VIS & IR Polarizers

    DIC Analyzer

    WFA3110 FN-IR/FA IR &

    VIS DIC Analyzer

    WFA3120FN-P Visible

    Rotatable

    WFA3143DIC Slider 25X

    WFA3144DIC Slider 40X Plan Fluor,

    Plan APO (Air), Plan APO(LWD 40X 1.15 NA)

    WFA3145DIC Slider 40X

    APO NIR (N2)

    WFA3140DIC Slider 10X Plan Fluor

    WFA3146DIC Slider 60X

    APO NIR (N2)

    WFA3142DIC Slider 20X PlanFluor, Plan APO (N2 Dry)

    WFA3141DIC Slider 16X

    WFA3121FN-IRP IR Rotatable

    WFA3130N1 Dry (10X)

    WFA3131N2 Dry

    (16X - 100X)

    WFA3000DIC Turret Adapter

    BSA2000Compact CondenserMounting Arm

    CSA2000CondenserMounting Arm

    CSA2100SM260 mmCage Arm

    CSA2001Cerna SM2 to D3N Dovetail

    Adapter

    ZFM2020Focus Module

    for Edge-Mounted Arm

    ZFM2030Focus Module for

    Middle-Mounted Arm

    CSC1003D-CUO Oil Condenser 1.4 NA

    CSC1002D-CUD Universal Condenser 0.9 NA

    CSC1001FN-C LWD Condenser 0.78 NA

    LED Drivers

    Illumination Kits

    MountingArms

    Trans-Illumination Modulesand AccessoriesWFA1010

    VIS LED

    WFA1020IR LED

    WFA1051VIS & IR LEDs

    DC41004 Channels1 Mod Input

    DC41044 Channels

    4 Mod Inputs

    LEDD1B1 Channel

    WFA1000Transmitted Light Only

    WFA0150Transmitted LightModule Adapter

    WFA1100Dodt/Gradient

    Step 13:Transmitted Light Illumination

    For Micromanipulators

    CSA1000For MLS203-1

    XY Stage

    MZS500-EZ-Axis Piezo Stageand Controller Kit

    ZFM2020Focus Module for

    Edge-Mounted Arm

    CSS2001Manual Olympus XY

    Stage for Upright Microscope

    CSS1051Clamp on Olympus

    Stage Adapter

    MLS203-1Fast XY

    Scanning Stage

    CSA1001SM1, 30 mm

    Cage Arm

    CSA1002SM2, 60 mm

    Cage ArmFor Slides

    For Recording Chambers

    For MLS Inserts

    Rigid Stand Sample Holders

    Fixed Armsfor Microscope

    Body

    Step 8:Sample/Manipulator

    Stages

    Requires:• CSE1000 from Step 4• DIC-Compatible Nosepiece from Step 5• WFA1000 Module from Step 13

    PFM450E450 µm Travel

    Piezo Stage

    ZFM2030Focus Module for

    Middle-Mounted Arm

    V 2 . 2


Recommended