8/19/2019 CBA Online Customer Catalog
1/24
Revised 01.26.2016
Instructor -Led and Online Learning
Customer Training Catalog:
Trane College of Building Automation
8/19/2019 CBA Online Customer Catalog
2/24
2
8/19/2019 CBA Online Customer Catalog
3/24
3
The training described in this catalog is intended for Trane building owners and operators. Allstudents must have approval from their local Trane office to attend classes. Uponregistration, an email will automatically be sent to your local Trane office requesting approval.
Trane has a policy of continuous product improvement; it reserves the right to change course designand/or content without notice. Trane reserves the right to reject any training course application.
Federal Government:
Orders for training courses by Federal Government employees should be made out to our Federal
Government reseller, IMMIX/EC America, Inc. and paid for by credit card. Purchase Orders will only beaccepted for amounts greater than $5000. Credit card statements for training will list IMMIX as the
payee. Training provided by Trane College of Building Automation is listed in the GSA Federal Supply
Schedule. Check our website for details: http://www.trane.com/tcba
Enroll Early! Save $$ Any class registrations received a minimum of 60 days before the class begins will receive an Early-bird10 percent tuition reduction.
Check Your Email! Trane Education Center will email a confirmation letter to the email address you provide in your online profile.
Your confirmation provides information for arranging hotel accommodations. If you don’t get an enrollment
confirmation, you are probably either not enrolled in the class, or it has gone to your junk mailbox (some systems
don’t recognize Trane Education Center as a valid sender). Call us at 855-803
-3563 if this happens.
Check Us Out Online: To learn more about Trane products and services, visit our webpage: http:www.trane.com/tcba
Building Security: While in the St. Paul headquarters, attendees are issued a temporary identification badge upon arrivaland are required to display the badge on their person throughout the duration of the course.When attending classes in our local offices you may be required to display a visitors badge as well.
Proper Clothing: Controls personnel attending a class may wear normal work apparel or business casual attire. Shorts,sandals and flip-flops are not appropriate for course attendance.
Expert Training:
This catalog presents complete descriptions for our current offering of controls courses. Course
instructors have strong controls backgrounds and extensive teaching experience. They have access to
Trane’s product, service and systems engineers and extensive technical reference resources. A
controlled laboratory environment, complete with operational Trane control systems, provides an ideal
setting for the hands-on approach used in many of our courses.
Trane College of Building Automation
General Information
http://www.trane.com/tcbahttp://www.trane.com/tcbahttp://www.trane.com/tcbahttp://www.trane.com/tcbahttp://www.trane.com/tcbahttp://www.trane.com/tcba
8/19/2019 CBA Online Customer Catalog
4/24
4
IACET "Authorized Provider":
Trane College of Building Automation has been accredited as an Authorized Provider by the Internation-
al Association for Continuing Education and Training (IACET). This accreditation allows awarding of
Continuing Education Units (CEUs) and/or Professional Development Units (PDUs) for completion of
Trane Technical Training courses.
Enrollment Policy:
All courses are offered on a first registered first attend basis. If the class you prefer is filled, your name
will be added to a wait list in case of a cancellation. All non-Trane students must be approved by their
local Trane office prior to attending class.
Course Locations:
Courses are held in our St. Paul, MN headquarters and regional classes are held in the local Trane
Sales office unless noted otherwise.
Hotel Information - St. Paul classes only:
Information needed for contacting BCD Travel and registering for our recommended hotel is provided in
the confirmation e-mail. Students are responsible for hotel fees at check-out.
Hotel charges are at our corporate discount rate and include tax. To receive this discount on the cost of
your hotel room, you must make room reservations through BCD Travel. We provide transportationbetween our training facility and the White Bear Country Inn in St. Paul, and back to the airport for
departure. Students who make separate hotel arrangements are responsible for their own
transportation. Regional classes are given hotel recommendations only; no transportation is provided.
Contact Us
Call us at 855.803.3563
Email at [email protected]
Trane
4833 White Bear Parkway
St. Paul, MN 55110
Trane College of Building Automation
General Information
8/19/2019 CBA Online Customer Catalog
5/24
5
The Package Program is designed to allow independent office
employees and customers to receive a discount on training costs for attending
any factory level training course through the purchase of training credits. The
training credits can be acquired by purchasing a training package (Gold or
Platinum) through the Trane Education Center or calling Technical Training toll
free at 1-855-803-3563. Through this program, you are able to receive up to
40% off course tuition.
Training credits can be used to purchase any factory level training course
offered through Service Training and Controls Training. Each credit isequivalent to one dollar . They can be used by one employee or twenty-five
employees; they are not tied to a single individual.
How does the program work?
1. Determine the package that will best benefit you or your (the Platinum package can be used for two years from the date of
purchase, and the Gold package can be used for one year from the date of purchase).
2. Create a profile in Trane Education Center (TEC) if you don’t already have one, AND create a profile for each employee you
want to enroll in a course.
3. Login and search the TEC online catalog for the appropriate package program and proceed to your Shopping cart for
payment.
4. We will receive notification that you have purchased a package and will contact you within 24 hours to activate the program
and give you the Training order code. These credits will be available to apply immediately.
5. Login and search the TEC online catalog for the course(s) you want to send your employee(s) to and proceed to the
Shopping Cart and uncheck “Enroll Self .” Select “Training Credits” as your payment method and put in the order code we
gave you; click “Apply.” You will use the same order code each time you want to apply credits to a course enrollment .
Proceed through the Shopping Cart and select the individual(s) to apply the course(s) to at the end of the Shopping Cart. You
do not need to apply all credits at the time of purchase.
Our personal white glove service starts immediately. We will track the credits your company has used as well as send periodic
updates and reminders of your remaining credits.
Package Program*NEW
Choose from
our two
packages!
PLATINUM 47,500 CREDITS / $28.5k PLATINUM 47,500 CREDITS / $28.5k
GOLD 7,600 CREDITS / $5.7k GOLD 7,600 CREDITS / $5.7k
8/19/2019 CBA Online Customer Catalog
6/24
6
Online Enrollment Steps
1. Search for any course at www.trane.com/Commercial/
2. Click on “Products and Systems” - “Education and Training” - “Class Finder.” All College of Building Automation courses are identified by the words “Factory Training” in the title. Select a course and click on the“Register” link.
3. Every person that wants to take a class needs their own account. If you already have one, you can enter yourusername and password on the webpage you’re directed to (Trane Education Center ) and proceed by browsing
our catalog and selecting the course you want to take. Otherwise, if you haven’t taken a class with us beforeyou will need to create an account by clicking on the “New Customer? Register Here” button.
All enrollment is done through Trane Education Center .
How to Pay:
Indicate your means of payment when you enroll online via Trane Education Center. Payment can be made:
1.) By major credit card (preferred method)
2.) By purchase order if a Trane Commercial Account has been established (PO number must be entered when
enrolling online)
3.) By check or money order made out to The Trane Company
Cancellation Policy:
You can cancel out of a course up to 14 days before the course start date without penalty. Any cancellation made
within 14 days of the course start date is subject to full tuition cost; however, student substitutions are allowed.
Trane reserves the right to cancel any class. We will notify you of a cancelled class on or before 14 days prior to the
class start date. We will send you a confirmation that a class confirmed. Please do not make travel arrangements
until a class confirmation is issued. We are not responsible for transportation costs that may result from a class
cancellation.
If you have questions, please contact the LMS Training Coordinator at your local Trane Office or Trane Technical
Training by phone 855.803.3563 or email [email protected].
Online Enrollment:
Trane Education Center
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
7/24
7
Scheduled dates for our classes can be found by visiting:
http://www.trane.com/commercial/north- america/us/en/products- systems/ education- training/finder.html
Trane College of Building Automation Contents Read the course description provided in this catalog before enrolling. If you can’t find
the training you need, contact Trane Technical Training toll free at 855.803.3563.
TITLE PAGE
Introduction: Instructor - Led Classes and Progression Flow Charts 8
Course Tuition 11
Tracer Summit System Operation 12
Tracer Summit 101 13
Tracer Summit 102 14
Tracer MP580/581 Installation & Programming 15
Tracer SC Operation 16
Tracer ES Operation 17
Introduction: Online Classes 18
Tracer ES Operation Curriculum for Operators 19
Introduction to the Tracer SC System 20
Appendix: Training Resources for Customers 21
http://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.html
8/19/2019 CBA Online Customer Catalog
8/24
8
Trane College of Building Automation currently offers 6 instructor -led courses for Trane
building owners and operators:
1. Tracer Summit System Operation
2.
Tracer Summit 101
3. Tracer Summit 102
4. Tracer MP580/581 Installation & Programming
5.
Tracer SC Operation
6. Tracer ES Operation
Our instructor -led courses are delivered at the Trane College of Building Automation Technical
Training Center, located in White Bear Lake (St. Paul), Minnesota and are also offered
regionally in local Trane offices.
All course enrollments must be completed online via Trane Education Center and every
student must have their own account in Trane Education Center. For detailed enrollment
instructions, please review the procedure in the online enrollment section.
Wondering which class is appropriate for you? View the following two pages to look at flowcharts of step-by-step class progression whether you have a Tracer Summit, Tracer SC,Tracer UC or Tracer ES system.
Introduction: Instructor -Led Classes
https://mylearning.ingersollrand.com/lmt/xlr8login.login?site=trane-exthttps://mylearning.ingersollrand.com/lmt/xlr8login.login?site=trane-exthttps://mylearning.ingersollrand.com/lmt/xlr8login.login?site=trane-ext
8/19/2019 CBA Online Customer Catalog
9/24
9
Trane College of Building Automation
Class Progression
8/19/2019 CBA Online Customer Catalog
10/24
10
Trane College of Building Automation
Class Progression
8/19/2019 CBA Online Customer Catalog
11/24
11
*Early -bird Rate: Any class registrations received a minimum of 60 days before the
class begins will receive a 10% tuition reduction.
Course Tuition
Course Title Regular
Tuition
*Early-Bird
Rate
Tracer Summit System Operation $1550 $1395
Tracer Summit 101 $1980 $1782
Tracer Summit 102 $1980 $1782
Tracer MP580/581 Installation & Programming $1980 $1782
Tracer SC Operation $1100 $990
Tracer ES Operation $660 $594
8/19/2019 CBA Online Customer Catalog
12/24
12
INTRODUCTION: INSTRUCTOR - LED CLASSES
Specific Course Objectives
Upon completion of this course, participants should be able to:
Create and modify schedules/holiday and exceptions
Create, modify and plot graphs of trends
Respond, route and print alarms
Create, modify users and passwords of security
Create and modify basic graphics
Monitor chiller plant control
Learn how time-of -day, area and variable air systems work together through applications
Target Audience
Tracer Summit System Operations is intended for Traneservice technicians and Tracer Summit system owners,building engineers, and operators.
Prerequisites
None
Pre-work
There is no pre-work associated with this class.
Course Description
In this course, students will learn to perform common and advanced operations with their installed Tracer Summitsystem. This highly interactive basic course includes presentations and hands-on workshops where students prac-tice using the common applications of a Tracer Summit building management system and learn how to monitor andcontrol building mechanical systems. Note: This is a good course to take if you’re planning to take Tracer Summit 101.
Tracer Summit System Operation Length: 3.5 Days
Schedule: Tues.-Thurs. 8 a.m. - 4:30 p.m.; Fri. 8 a.m. - 11:30 a.m.
Tracer Summit System Operation
Length: 3.5 Days
Day 1-3: 8 a.m. - 4:30 p.m.; Day 4: 8 a.m. - 11:30a.m. Login at Trane Education Center
Recommended Search: system operation
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
13/24
13
Specific Course Objectives
Upon completion of this course, participants should be
able to:
Size a Building Control Unit (BCU)
Install BCU hardware
Understand Ethernet LAN installations
Configure a BCU with an IP address
Configure a site
Install LonTalk® devices on a BCU including Generic
LonTalk Devices (GLDs)
Install Trane unit controllers
Configure Area and VAS applications
Create schedules
Configure alarm and message routing
Create and configure points
Create custom graphics
Back up and restore a site
Target Audience
Tracer Summit 101 is intended for Trane technicians and
applied systems contractors.
Prerequisites
While not a required prerequisite, Tracer Summit System
Operation is highly recommended prior to taking Tracer
Summit 101.
Pre-work
There is pre-work associated with this class; all pre
-work
must be completed prior to coming to class. Students will
be tested on this material the first day.
LonTalk Fundamentals eLearning
Course Description
The Tracer Summit installation course is intended for BAS personnel and Applied Systems Contractors who will beresponsible for engineering, installing and commissioning Tracer Summit Projects. The skills taught in theinstallation workshops are intended for those who will install Tracer Summit hardware and configure applications.
Tracer Summit 101
Length: 4.5 Days
Day 1-4: 8 a.m. - 5 p.m.; Day 5: 8 a.m. - 11:30 a.m. Login at Trane Education Center
Recommended Search: summit 101
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
14/24
14
Specific Course Objectives
Upon completion of this course, participants will understand:
Set up and operation of area control
Variable Air Systems (VAS) [Comm4 and LonTalk]
Chiller Plant Control (CPC)
How to write programs using CPL
Target Audience
Tracer Summit 102 is intended for Trane technicians and contractors who have successfully completed Tracer
Summit 101 and have a solid working knowledge of those subjects.
Prerequisites
Tracer Summit 101
Pre-work
There is pre-work associated with this class; all pre-work must be completed prior to coming to class. Students will
be tested on this material the first day.
Online document attached to course details in your Trane Education Center account.
Tracer Summit 102
Length: 4.5 Days
Schedule: Mon.-Thurs. 8 a.m. - 5:00 p.m.; Fri. 8 a.m. - 11:30 a.m.
Course Description
Students are introduced to the standard Tracer applications included with the Tracer Summit software through
lecture and extensive hands-on workshops. In addition to the standard Tracer applications, the course also covers
the custom programming language (CPL) used in Tracer Summit.
Tracer Summit 102
Length: 4.5 Days Day 1-4: 8 a.m. - 5 p.m.; Day 5: 8 a.m. - 11:30 a.m.
Login at Trane Education Center Recommended Search: summit 102
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
15/24
15
Specific Course Objectives
Upon completion of this course, participants should be
able to:
Install and configure a Tracer MP580/581 controller
Program a constant volume air handler using the
SCC profile
Create programs using debug or simulation (Online/
Offline)
Test TGP programs using debug or simulation(Online/Offline)
Utilize a Tracer MP580/581 to create a small
building network
Integrate the Tracer MP580/581 into Tracer Summit
Target Audience
Tracer TM MP580/581 Controller
installation and Programming isintended for Trane technicians and
contractors.
Prerequisites
Tracer Summit 101 is recommended but not required.
Pre-work
There is pre-work associated with this class; all pre-work
must be completed prior to coming to class. Students will
be tested on this material the first day. You can enroll in
these courses individually, or enroll in the course “
Pre- work for Tracer MP580/581 Installation and
Programming ” to enroll in all three courses at once.
Tracer MP580/581 Hardware & Installation
eLearning
Tracer MP580 Setup &Troubleshooting
eLearning
How To-Introduction to Rover eLearning
Tracer MP580/581 Installation & Programming
Length: 3.5 Days
Schedule: Tues. -Thurs. 8 a.m. - 4:30 p.m.; Fri. 8 a.m. - 11:30 a.m.
Course Description
Students will set up, test and program the Tracer MP580/581 controller. This field-installed controller is suited for
many building control applications like air handlers, cooling towers, pumps, boilers and heat exchangers.
Tracer MP580/581 Installation & Programming
Length: 3.5 Days Day 1-3: 8 a.m. - 4:30 p.m.; Day 4: 8 a.m. - 11:30 a.m.
Login at Trane Education Center Recommended Search: mp580
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
16/24
16
Specific Course Objectives
Upon completion of this course, participants should be
able to:
Monitor and control the building’s mechanical
systems
Respond to alarms and events
Add and modify schedules
Create, view and edit data logs
Perform area overrides
Add and delete users
Backup a site
Target Audience
Tracer SC Operations is intended for Trane
service technicians and Tracer SC system
owners, building engineers, and operators.
Prerequisites
Introduction to the Tracer SC System e-learning module
is recommended but not required.
Pre-work
There is no pre-work associated with this class.
Tracer SC Operation
Length: 3.5 Days
Schedule: Tues. -Thurs. 8 a.m. - 4:30 p.m.; Fri. 8 a.m. - 11:30 a.m.
Course Description
In this course, building operators and Trane technicians will learn to operate and modify their Tracer SC system.
This course is highly interactive and includes presentations and hands-on workshops where students practice using
the common applications of a Tracer SC building automation system while learning how to monitor and control
building mechanical systems.
Tracer SC Operation
Length: 2.5 Days
Day 1-2: 8 a.m. - 4:30 p.m.; Day 3: 8 a.m.- 11:30 a.m. Login at Trane Education Center
Recommended Search: sc operation
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
17/24
17
Specific Course Objectives
Upon completion of this course, participants should be able to use the following Tracer ES functionality:
User management
Status and overrides
Working with schedules
Alarm processing
Data logging
Custom reporting
Target Audience
Tracer ES Operation is intended for building
operators and owners with Tracer ES.
Prerequisites
Tracer ES Operations - Curriculum for Operators
e-learning module is recommended but not required.
Pre-work
There is no pre-work associated with this class.
Tracer ES Operation
Length: 1.5 Days
Schedule: Day 1: 8 a.m. - 4:30 p.m.; Day 2: 8 a.m. - 11:00a.m.
Course Description
Tracer ES Operation is specifically designed for building operators and administrators to become more efficient with
their Tracer ES system. Tracer ES is a web enabled service and monitoring tool that allows building operators and
administrators to remotely monitor and control their buildings or multiple facilities.
Tracer ES Operation
Length: 1.5 Days Day 1: 8 a.m. - 4:30 p.m.; Day 2: 8 a.m. - 11:30 a.m.
Login at Trane Education Center Recommended Search: es operation
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
18/24
18
Introduction: Online Classes
Trane College of Building Automation has online courses available for students that canbe taken at their own pace. All eLearning must be accessed via:
Trane Education Center
Each student must have their own account in Trane Education Center. A detailed
description of each module appears on the following pages.
https://mylearning.ingersollrand.com/lmt/xlr8login.login?site=trane-exthttps://mylearning.ingersollrand.com/lmt/xlr8login.login?site=trane-exthttps://mylearning.ingersollrand.com/lmt/xlr8login.login?site=trane-ext
8/19/2019 CBA Online Customer Catalog
19/24
19
Modules included in this curriculum are:
Navigation
User Preferences
Managing Alarms
Viewing Status
Viewing Data Logs
Creating Data Logs
Viewing Schedules
Overrides
Target Audience
This course is intended for Tracer ES
users and operators.
Course Description
This curriculum will walk the student through common tasks they would perform while using their Tracer ES system.
Tracer ES Operations - Curriculum for Operators Length: 5-15 minutes per module
Login at Trane Education Center
Recommended Search: es operation
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
20/24
20
Specific Course Objectives
Upon completion of this course, participants should be able to:
Understand the Tracer SC role in a building automation system
Navigate through the user interface
View equipment and spaces status and data logs
Override occupancy or set-points
Determine what set-point will be used by the system
Access, view and maintain alarms and events
Change a schedule and add an
exception
Target Audience
This course is intended for Tracer SC
users and operators.
Course Description
This course introduces you to the Tracer SC interface and common tasks performed using it.
Introduction to the Tracer SC System Length: 45 minutes
Login at Trane Education Center
Recommended Search: tracer sc
http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16http://mylearning.ingersollrand.com/lmt/xlr8login.login?in_portid=16
8/19/2019 CBA Online Customer Catalog
21/24
21
View course descriptions, access the link to our catalog and
flow charts with recommended course progression for all
controls courses, and for the FAQ document
http://www.trane.com/tcba
Instructor -led training schedule (Note: look for “Factory Training”)
http://www.trane.com/commercial/north-america/us/en/products-
systems/education-training/finder.html
Register for an Instructor -led class
Login or create an account in Trane Education Center
www.trane.com/tec. (If you don’t know your username or password,
email [email protected]; otherwise to create an account select
“New customer? Register Here” and fill out the blanks accordingly perthe student that will be attending training ), Select Catalog - Search - Course Name:
[enter one or two keywords from the course title]. All available courses will appear and
you can proceed to the shopping cart to confirm payment (PO or credit card).
Online training
Login or create an account in Trane Education Center
www.trane.com/tec. (If you don’t know your username or password,
email [email protected]; otherwise to create an account select
“New customer? Register Here” and fill out the blanks accordingly perthe student that will be attending training ), Select Catalog - Search - Category:
Controls and Automation; Type: Online. A list of eLearning courses will appear and you
can proceed to the shopping cart to confirm payment (PO or credit card).
Trane College of Building Automation
Appendix: Training Resources for Customers
http://www.trane.com/commercial/north-america/us/en/products-systems/education-training/training/controls-and-automation.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/training/controls-and-automation.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/techttp://www.trane.com/tecmailto:[email protected]:[email protected]://www.trane.com/techttp://www.trane.com/tecmailto:[email protected]:[email protected]:[email protected]://www.trane.com/tecmailto:[email protected]://www.trane.com/techttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/finder.htmlhttp://www.trane.com/commercial/north-america/us/en/products-systems/education-training/training/controls-and-automation.html
8/19/2019 CBA Online Customer Catalog
22/24
22
8/19/2019 CBA Online Customer Catalog
23/24
23
8/19/2019 CBA Online Customer Catalog
24/24
Ingersoll Rand (NYSE:IR) advances the quality of life by creating comfortable, sustainable and efficientenvironments. Our people and our family of brands—including Club Car®, Ingersoll Rand®, Thermo King® andTrane®—work together to enhance the quality and comfort of air in homes and buildings; transport and protectfood and perishables; and increase industrial productivity and efficiency. We are a $12 billion global businesscommitted to a world of sustainable progress and enduring results. For more information, visitwww.ingersollrand.com.
© 2014 Trane All Rights Reserved CBA TRG001 EN 04132015
http://www.ingersollrand.com/http://www.ingersollrand.com/http://www.ingersollrand.com/