CATALOGUEEDITION 3
Motospecs is focused on customer satisfaction and providing quality parts to the market. It has a strong portfolio of innovative product brands and prides itself on broad availability of parts coverage for most makes and models, competitive pricing and high order fill.Motospecs prides itself on customer service and technical expertise. Wherever you are in Australia or New Zealand, Drivetech sales and technical support is only a phone call away.
Australia: 1800 463 646 www.drivetech.com.au
New Zealand: 0800 333 125 www.drivetech.org.nz
TECHNICAL SUPPORT
Motospecs recognises the importance of customer confidence and satisfaction in the quality of its products. All Drivetech parts are warranted against defects in workmanship or material for a period of 12 months from the date of sale, unless otherwise stated. Drivetech parts found upon examination by an authorised Motospecs representative to be defective in material or workmanship will be replaced by Motospecs. The cost of returning parts under the warranty must be borne by the customer and must be pre-paid. In order to make a claim under this warranty, the faulty product, proof of purchase and the reason for or details of the failure must be provided to Motospecs.This warranty does not cover damage by misuse or improper installation, or liability for labour charges or consequential loss or damage incurred as a result of the failure of a Drivetech part.
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss of damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
FOR GOODS PURCHASED IN AUSTRALIA ONLY
© Motospecs www.drivetech.com.au • www.drivetech.org.nz 1
CONTENTS
Motospecs, a division of GPC Asia Pacific ABN 97 097 993 283 is the owner of copyright of this publication, including layout, drawings, photographs, text and part number systems. No part of this catalogue may be reproduced or copied in any form or by any means without the prior written permission of Motospecs. This catalogue has been prepared for the Australian market. Due to vehicle production changes and supersessions, you should ensure that the part you are selecting is suitable for your application.
COPYRIGHT NOTICE
GENERAL WORKSHOPDiagnostics 2
Pullers 2-7
WorkshoP 7-20
SPECIALIST TOOLSBraking 20-22
steering 22-23
DiFFerential 23-25
transMissionaisin Warner aW55-50sn/tr, tF series 25-26
aisin Warner a750, a761, a960 series 27
aisin Warner a40 series 27chrysler 62te, 42rle, 5-45rFe, 68rFe & JF011e 27
Ford 5r55e, n, s, W 28
Ford e40D, 4r100 29
Ford Btr/ion/Dsi M72-97le 29-30
general Motors trimatic/4l30e 30-31
general Motors 4l60e, 65e 31-33
general Motors 5l40e, 6l80e 33-34
getrag 6Dct450/470 35-36
Jatco re0F09a/JF010e 36
Jatco re0F10a/JF011e 37
transMission - continuedJatco Fn4a-el/Fnr5, Ford 4F27e 37
Mercedes 722.0, 100, 200, 300, 400, 500 37-38
Mercedes 722.300, 400, 500 38-39
Mercedes 722.600, 700, 800, 900 39-40
VW 095-01P 40
VW/audi/skoda 01J cVt 40-41
VW/audi/skoda Dsg 02e/0aM 41-42
ZF 5hP18, 19, 24, 30 42
ZF 6hP26 43
transmission general 43-51
transmission Diagnostic 51-52
VEHICLE SPECIfICauDi, skoDa, VolksWagen 52-54
ForD courier/MaZDa BraVo 54
ForD Falcon Ba-Fg territory 54
ForD MonDeo/Focus 55
holDen roDeo/isuZu D-Max 55
MerceDes 55
toyota lanDcruiser 60, 70, 80, 100 series/hilux 56
SPECIALIST TOOLS
© Motospecs
GENERAL WORKSHOPDIAGNOSTICS
Extra Long Pick & Hook Set
• 8pieceset• 230mmlong• Softgriphandles• Suppliedinpouchcase
Part Number: UXT-10331
PULLERS
Self Centring Puller - Screw Type
• Adjustable• Multifit• Usedforon-carFWDhubbearingremovalandinstall• Comeswith2sizecones
Part Number: UXT-10050
Harness Diagnostic Pin Out Set
• Variousterminalsandpatchleadsforeaseofdiagnostics• LEDtestrig• Variableresisterterminal• Variousprobes• Multiplesizeroundandflatterminals• Flatalligatorclamps
Part Number: UXT-10365
Terminal Pin Removal Kit
• Usedtoeasilyremovewiringterminalsfromhousings• Colourcodedforeasyidentification• 5piecekit• Suppliedinablowmouldedstoragecase
Part Number: UXT-10330
2
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPPULLERS
Thin Jaw - Screw Type
• Ultrathinjawsfortightapplications• 100mmdepth• 40mmto90mmoutsidereach
Part Number: UXT-10060
Puller Universal Screw Type
• 6slottype• Includes2setsofattachingbolts• Allsteelconstruction
Part Number: UXT-10065
Universal Pulley Holding Kit
• Designedtoholdthecrankshaftpulleystationarywhilelooseningandtighteningthecentreshaftbolt
• Includespullertoremoverflange/pulley• Lockingscrew:M6,M8
Part Number: UXT-10067
Blind Hole Kit
• Forremovalofbearingsandconesutilisingcentrehole• Comeswithbothslidehammerand2leggedscrewtype• Threadedrodends• Suppliedinablowmouldedstoragecase• 8mmto55mminsidediameter
Part Number: UXT-10070
3
© Motospecs
GENERAL WORKSHOPPULLERS
Screw Type Transmission Bearing Puller
• Removesinput,mainandcounter-shaftbearingsviacirclipgrooves• Specialclampholdspullerlegssecurelyintocirclipgrooves• 75to170mmspread• 380mmreach• Suppliedinablowmouldedstoragecase
Part Number: UXT-10071
Universal Puller Set
• 2pullerset-shortandlongwithextendablelegs• Shortset:60to150mmspread.Longset:130to230mmspread• Legs:72mmwith22mmextensions• Bolt:105mm,with15/30/55mmextensions• Suppliedinablowmouldedstoragecase
Part Number: UXT-10066
Hydraulic - 8 Tonne Bearing Separator Type
• Self-containedpumpandpullerbody• Withintegralsafetyvalve• Easyreleasevalve• 270mmreach,220mmspread
Part Number: UXT-10090
Bearing Splitter
• 4mmto35mmspread• Sturdysteelconstruction
Part Number: UXT-10091
4
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPPULLERS
Bearing Splitter
• 7mmto67mmspread• Sturdysteelconstruction
Part Number: UXT-10092
Bearing Splitter
• 13mmto60mmspread• Sturdysteelconstruction
Part Number: UXT-10093
Bearing Splitter
• 13mmto75mmspread• Sturdysteelconstruction
Part Number: UXT-10094
Bearing Splitter
• 27mmto115mmspread• Sturdysteelconstruction
Part Number: UXT-10095
5
© Motospecs
GENERAL WORKSHOPPULLERS
Screw Type T-Handle Lock - 5 Tonne Capacity
• Bearingcirclipgrooveandgeararmsets• Flatramadapter• 100mmreach• 13mmto130mmspread
Part Number: 104T/S
Standard Puller JawsPart Number: 10454
Transmission Puller JawsPart Number: 10454T
Hydraulic Type T-Handle Lock
• 12tonnesofpullingforce• Easyhydraulicleveraction• 83mmramstroke• 203mmreach,317mmspread• 3ramextendersincluded-48mmand2x74mmlengths
Part Number: PHS-108
PHS-108 Jaw Upgrade Kit - 2 Complete Sets
• 250mmlongreachjaws,381mmspread• 406mmlongreachjaws,571mmspread
Part Number: PHS-1
Screw Type T-Handle Lock - 3 Jaw Internal Puller
• 80mmlongstandardjaws: 15mmto100mmspread• 170mmlongextensionjaws: 25mmto127mmspread
Part Number: PM16
Standard Length Replacement JawsPart Number: 10554
6
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
Screw Type T-Handle Lock - 3 Jaw Bearing Circlip Type
• 133mmreach• 25mmto170mmspread
Part Number: TJ-2
Standard JawsPart Number: 10654
Replacement JawsPart Number: 10654T
GENERAL WORKSHOPPULLERS
Screw Type T-Handle Lock - 2 Jaw Bearing Circlip Type
• 235mmreach• 70mmto375mmspread
Part Number: TJ-1
Replacement JawsPart Number: 11054T
400mm Extended JawsPart Number: 11054L
Bolt Extender 38mmPart Number: X10
Standard JawsPart Number: 11054
80 Litre Oil Catcher
• 80litrecapacity• Includesfixedairregulator,foreaseofdraining• 380mmcollectionbowl• Telescopebowl(1140mmto1580mm)• Lockable3inchwheelcastors• Largehandleforeaseofmanoeuvring• Largerubbermouldtoprotectvehiclefromscratching• Comeswithadditional550mmdrainpan• Measurements:470mm(W)1140mm(MINH)1580mm(MAXH)• Fillcapacity:80Litresweight;36Kilos(empty)
Part Number: UXT-10280
WORKSHOP
7
© Motospecs
GENERAL WORKSHOPWORKSHOP
Oil Dispenser
• Fillsandextractsfluids• Pneumaticregulatedwithsafetycut-outvalve• Bottlemountedgauge• Idealfornonfillertubefittedtransmissions• 6litrecapacity
Part Number: UXT-10040
Reservoir Tank
• SeparatetankforUXT-10040
Part Number: UXT-10041
Transmission Filling Kit 7.5L
• Manualleveroperated• Separatefillingcaponthereservoir• Outputcapacity:700cc/cycle• 8pieceadapterfillingkitincluded• Suitablefor:Audi,Ford,Mercedes722.9,NewMini,Porsche,
Seat,Skoda,VWanduniversalapplications
Part Number: UXT-10360
Vacuum & Pressure Test Kit
• Assortedattachments• Switchablebetweenpressureandvacuum• Pressurerange: Positivepressure:0~60psi(1~4inhg) Negativepressure:0~-30psi(0~-1inhg)• Suppliedinablowmouldedstoragecase
Part Number: UXT-10550
8
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPWORKSHOP
Magnetic Vice Guards
• Fitsallvices• Aluminiumconstruction• Weightholdingcapacity: 2.4kgvertically 1.3kghorizontally
Part Number: HE-3
Clamp
• Bonnetstrutretainer• Screwtype• Smallyetstrong• Largeknobforeaseofuse
Part Number: UXT-10010
Spring Clamp Remover
• Forthesaferemovaloffuel,oilandwaterhosespringclamps• 600mmcablelengthtoreachhardtoaccessclamps• Canbelockedintoposition
Part Number: UXT-10370
Light
• LEDtype• Pushbuttononbase• 300mmflexibleshaft
Part Number: UXT-10030
9
© Motospecs
Stand
• Strongsteelconstruction• 750kgcapacity• 1400mmto2065mmheightrange• 305mmbasediameter
Part Number: UXT-10110
Transmission Jack
• Twostagetelescopic• 500kgsmaxload• 865mmbaseheight• 1820mmmaxheight• TiltandslidescrewadjustmentonTransmissionplatform
Part Number: UXT-10111
Suspension Arm Lever
• Universaldesign• 6wayadjustable• Safelyhooksontocontrolarms• Machinednon-slipgriphandle• Willdisassembleforeaseofstorage• Allsteelconstruction• 1000mmlength,30mmdiameter
Part Number: UXT-10115
CV Shaft Remover
• UsetoremoveCVShaftsfromtransmissions• Slidehammerdesign• 48mmopenfork
Part Number: UXT-10072
GENERAL WORKSHOPWORKSHOP
10
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPWORKSHOP
Drift Punch Set
• 8pieceset• Machinednon-slipgriphandle• Suppliedinwrappouch• Allsteelconstruction• Sizesinclude: 1.6mm,2.3mm,3.2mm,4.0mm,4.8mm,5.5mm,6.4mm&8.0mm
Part Number: UXT-10116
Tensioner Retaining Set
• Manufacturedfromhighqualityspringsteel• Usedtolocktimingbeltorchaintensioners• 6sizes:0.8to1.92mm• Retainedonsnapkeyring
Part Number: UXT-10551
Universal Flywheel Holder
• Allmetalconstruction• Adjustablemountingbolt• Allowstorquingofretainingbolts
Part Number: UXT-10210
Dual Mass Flywheel Wear Kit
• Designedtotestaxialplayandfreeplayangle• Dialgaugeincluded• Steelconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10650
11
© Motospecs
Clutch Alignment Set
• 15pieceset• Includes10fixedpilotadaptors:10mm,12mm,14mm,15mm,
16mm,17mm,19mm,25mm,27mm• Threadedspindleguides:55mm,100mm,155mm• Suitableformostmanualtransmissionswithsingleclutchdiscs,and
somedoublediscapplications• Suppliedinablowmouldedstoragecase
Part Number: UXT-10600
Stabiliser Bar Engine
• Fullyadjustablewidth• Twinhookwithchainsupplied• Rubberbasesonfeet• Measurements:1500mm(W)x270mm(H)
Part Number: UXT-10160
Stabilising Bar Engine Tri Brace
• 1830mmmainsupport,50mmsquaretube• 845mmforwardsupport,40mmadjustablesquaretube• Removablesupportingplateswithrubberpads• Twoforgedhooksandsupportchains• Forusewithheavilyforwardslantedenginebays• Preventsstabiliserbarrollover
Part Number: UXT-10165
Stabiliser Bar Engine - VW T5
• Application:VWTransporterT52004-on,andotherapplications
• Usedforsupportingengineduringremovalandinstallationofgearbox
• Measurements:578mm(L)x1830mm(W)x145mm(H)• Includes2chainsand2hooks
Part Number: UXT-10166
GENERAL WORKSHOPWORKSHOP
12
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPWORKSHOP
Guard Cover
• Tough1.2mmthickPVC• Measurements:870mm(W)x570mm(H)
Part Number: UXT-10180
Magnetic Tray
• Rectangularmagnetictrayholdsmetalpartsandsmalltools• Two85mmdiametermagnetsthatarerubbercoatedto
preventscratching• Measurements:240mm(L)x140mm(W)x45mm(H)
Part Number: UXT-10185
3 Magnet Storage Tray
• Rectangularmagnetictrayholdsmetalpartsandsmalltools• Three80mmdiametermagnetsthatarerubbercoatedto
preventscratching• Measurements:365mm(L)x165mm(W)x40mm(H)
Part Number: UXT-10186
Crows Foot Set
• 15pieceset• 8mmto19mm3⁄8”drive• 21mm,22mmand24mm1⁄2”drive• Suppliedinablowmouldedstoragecase
Part Number: UXT-10260
13
© Motospecs
Metric Pipe Spanners
• Uniquewraptypedesign• OEMdesign• Sizes:8mm&9mm,10mm&11mm,12mm&13mm,14mm&15mm• 4Spannerswithwrappouch
Part Number: UXT-10321
Imperial Pipe Spanners
• Uniquewraptypedesign• OEMdesign• Sizes:5⁄16”&3⁄8”,7⁄16”&1⁄2”,9⁄16”&5⁄8”,11⁄16”&3⁄4”• 4spannerswithwrappouch
Part Number: UXT-10322
Drain Plug Socket Set
Part Number: UXT-10265
Thin Wall, Deep Impact Wheel Socket Set - 3 Piece
• Plasticsleevesprotectaluminiumwheelsfromdamage• Heattreatedchamferedendsmakethesocketseasilyattachtothenuts• Non-slipdesignenforcestheadhesionbetweenthenutsandsocket• Colourcodedforeaseofidentification
Part Number: UXT-10345
GENERAL WORKSHOPWORKSHOP
• 15pieceset• ForusewithEuropean,AmericanandJapanesespecialisedvehicles• ½”drive‘T’barincluded• Sizes:8mm,9mm,9.5mm,10mm,12mm,14mm,17mmmaleHEXdrive 8mm,9.5mm,11mm,12mm,13mmmalesquaredrive 10mmfemalesquaredrive 3⁄8”maletriangulateddrive
14
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPWORKSHOP
Socket Set Star-E 9 Piece
• 1⁄2”drive• Sizes:E10,E11,E12,E14,E16,E18,E20,E22,E24• Suppliedinablowmouldedstoragecase
Part Number: UXT-10335
Torx Extractor Set
• SpecificallydesignedforHex,Torx,TorxPlus,MortorqandSecurityTorx• 8pieceset• Sizes:3,4,5,6,7,8,10and12mm• 10mm,12mmand14mmdrive• Suppliedinablowmouldedstoragecase
Part Number: UXT-10341
Multi-Spline Socket Set
• 26piece,1⁄2”drive• 8x55mmlength:M5,M6,M8,M9,M10,M12,M14,M16• 7x100mmlength:M5,M6,M8,M9,M10,M12,M14• 7x140mmlength:M5,M6,M8,M9,M10,M12,M14• 4x200mmlength:M8,M10,M12,M14• Suppliedinablowmouldedstoragecase
Part Number: UXT-10336
Hex-Bit Socket Set
• 30piece,1⁄2”drive• 9x55mmlength:5,6,7,8,10,12,14,17,19mm• 8x100mmlength:5,6,7,8,10,11,12,13mm• 7x140mmlength:5,6,7,8,10,12,14mm• 6x200mmlength:5,6,7,8,10,12mm• Suppliedinablowmouldedstoragecase
Part Number: UXT-10337
15
© Motospecs
TX-Star Socket Set
• 32piece,1⁄2”drive• 10x55mmlength:T20,T25,T27,T30,T40,T45,T50,T55,T60,T70• 10x100mmlength:T20,T25,T27,T30,T40,T45,T50,T55,T60,T70• 6x140mmlength:T40,T45,T50,T55,T60,T70• 6x200mmlength:T40,T45,T50,T55,T60,T70• Suppliedinablowmouldedstoragecase
Part Number: UXT-10338
Ribe Bit Socket Set
• 32piece,1⁄2”drive• 9x55mmlength:M5,M6,M7,M8,M9,M10,M12,M13,M14• 9x100mmlength:M5,M6,M7,M8,M9,M10,M12,M13,M14• 7x140mmlength:M8,M9,M10,M12,M13,M14• 7x200mmlength:M8,M9,M10,M12,M13,M14• Suppliedinablowmouldedstoragecase
Part Number: UXT-10339
Hub Nut Socket Set
• Includes30mm,32mm,34mm,35mmand36mmsockets• 1⁄2”drivesockets• Usedfordriveshaftnubnuts• 75mmlong
Part Number: UXT-10270
Spark Plug Socket Set
• Ratchetfeatureshingedhandlewithballjoint-3⁄8”drive• 2x90mmlongsockets-14mmand16mm• 2x250mmlongsockets-14mmand16mm• SuitableforEuropeanandJapanesevehicles
Part Number: UXT-10250
GENERAL WORKSHOPWORKSHOP
16
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPWORKSHOP
Glow Plug Socket Set
• 5pieceset• 1⁄4”drivewithUniversalJoint• 12pointSocket,Multi-Hex,70mmlength• Sizes:8mm,9mm,10mm,12mm,14mm• Suppliedinablowmouldedstoragecase
Part Number: UXT-10251
Temperature Pick Up Infrared
• Handheld,batteryoperated• Widetemperaturereadingrange• BacklitLEDdisplay
Part Number: UXT-10200
Digital Torque Wrench 1⁄4” Drive
• Inbuiltmemorywillholdupto50torquesettings• Measures6-30Nm• Accuracy±4%• Autoshutoff80seconds• Suppliedinablowmouldedstoragecase
Part Number: UXT-10205
Cooling System Pressure Tester & Vacuum Fill Kit
• 28piececomprehensiveset• Forcoolingsystempressuretestandrefillingnewcoolant
bycreatingvacuuminthecoolingsystem• SuitableforAmerican,Australian,European,Japanese
andKoreanvehicles• Suppliedinablowmouldedstoragecase
Part Number: UXT-10500
17
© Motospecs
Cooler Line Disconnect Tool
• Smallandeasytouseinconfinedplaces• SuitableforbothPowerSteeringandTransmissionoilcoolerlines• BMW3-Series,X3,X5andLandrover1999-on
Part Number: ZXT-619000
Straight Edge
• 52cmlong• Convenienthangingholeandedgeprotector• Usewithfeelergaugestocheckfordistortionintransmissionvalve
bodies,pumps,casesandothercomponents• Suitableforusewithengineblocks,cylinderheadandflywheels
Part Number: UXT-10325
5 Piece Trim Removal Set
• Usedtoremovedoorpanels,fasciaandtrimstrips,dashboard,interiorpanels,trimandwindowmouldings
• Madefromimpactresistantplastic• Slimdesignfordelicatework• Includes:plasticwedge,dismountinglever,combinedclipreleasetool,
clipremoverandtrimseparator
Part Number: UXT-10300
Scraper Set 3 Piece
• Stainlesssteelblades• Timberhandles• Housedinprotectivepouch
Part Number: UXT-10191
GENERAL WORKSHOPWORKSHOP
18
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
GENERAL WORKSHOPWORKSHOP
Scraper Set 4 Piece
• Metalblades• Largeergonomichandles• 2narrowand2wideblades• 2longand2shortshanks• Suppliedinablowmouldedstoragecase
Part Number: UXT-10192
Spring Compressor - Screw Type
• Canbeusedonoroffcar• Specificallydesignedforconicaltypespringsthathave
differentspringdiameterstoptobottom• Allmetalconstruction
Part Number: UXT-10290
Portable Mini Hand Press
• Usedfor“oncarremoval”ofbushesandballjoints• 7pieceset• Suitableforalargerangeoftopandbottomballjoints• Specialadaptersfor“V”SeriesCommodorerearsuspensionbushesincluded• Allsteelconstruction• MadeinAustralia
Part Number: GGT-400
Axle Bearing Press Tool
• Forthesaferemovalofrearaxlebearings• Vehiclessuitedfor:FordCourier,HoldenRodeo-2and4WD,Mazda
Bravo,MitsubishiL300,Triton-2and4WD,NissanNavara-2and4WD,ToyotaHiace,Hilux-2and4WD,Suzuki
• Canbeusedwithsplitterbearingplates• MadeinAustralia
Part Number: GGT-600
19
© Motospecs
GENERAL WORKSHOPWORKSHOP
Axle Bearing Press Tool
• Forthesaferemovalofaxlebearings• Vehiclessuitedfor:HoldenFrontera,Jackaroo,Nissan
Patrol(6stud),ToyotaPradoandLandcruiser• Canbeusedwithsplitterplates• MadeinAustralia
Part Number: GGT-620
SPECIALIST TOOLSBRAKING
Brake Caliper Wind Back Kit - 21 Pieces
• SuitsmostEuropean,Japanese,KoreanandUSvehicles• Includesleftandrighthandhelixbolts• T-barhandledesign• Alsoabletouse3⁄8”driveratchetwhenmoretorqueisrequired• Includetoolsforfrontandrearpistons
Part Number: UXT-10340
Universal Hydraulic Flaring Tool• Kitincludesvarioussizesofdiesandadapterstoworkonflaring
tubetransmission,brakeandairconditioninglines• Push-Connect:1⁄4”,5⁄16”,3⁄8”• Fuelline:5⁄16”,3⁄8”• Single/doubleflare:3⁄16”,1⁄4”,5⁄16”,3⁄8”,1⁄2”• Metricflare:4.75mm,6mm,8mm,10mm• Suppliedinablowmouldedstoragecase
Part Number: UXT-10351
Universal Flaring Tool
• Kitincludesvarioussizesofdiesandadapterstoworkonflaringtubetransmission,brakeandairconditioninglines
• Includes5adapters:3⁄16”,1⁄4”,5⁄16”,3⁄8”,&1⁄2”• Designedfordoubleorsingleflareincopper,aluminium,brassand
softsteelfluidlines• Suppliedinablowmouldedstoragecase
Part Number: UXT-10352
20
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSBRAKING
Brake Caliper Piston Wind Back Tool
• 70mmwidepaddlesdesignedforquadpistolcaliper• 15mmto75mmspread• Allsteelconstruction• Internalrollerbearingforsmoothoperation
Part Number: UXT-10220
Pneumatic Brake Fluid Extractor/Bleeder - 2 Litre
• Collectsoldbrakefluidwithoutspillage• Fastandeasytouse• Versatiledesign• HandlesmostABSandstandardsystems• Integratedsilencerforaquieterworkingenvironment• Siliconsuctionhoseswithuniversalrubberfittings
Part Number: UXT-10350
Brake Fluid Filler
• Usedtofillbrakefluidreservoireasily• Gravityfeddesign,withhighqualitybrasstapandfixtures• Locksontobrakefluidreservoir
Part Number: UXT-10355
Pipe Bender
• Adjustablefor3⁄16’’,1⁄4”,5⁄16”&3⁄8”pipediameters• Handoperatedorvicemounted• Suitableforcopper,kunifer,steelorbrasstubing• Willproducebendsfrom3⁄4”(19mm)to11⁄4”(32mm)• Housedinprotectivepouch
Part Number: UXT-10356
21
© Motospecs
SPECIALIST TOOLSBRAKING
Fluid Line Stopper 2 Piece Set
• Usedonfluidlinestostopflowafterdisconnection• Suitableforuseonflexiandsolidfluidlines• Suits3⁄8”,5⁄16”,1⁄2”pipeendsandbanjotype• Springloaded• Packof2
Part Number: UXT-10357
Fluid End Line Stopper
• Idealforsealingmetalflaredbrake,transmissioncoolingandfuelpipes• Screwtype• Suitspipesize4mm-10mm
Part Number: UXT-10358
Master Line Disconnect Kit
• Suitableformostfuel,transmissioncoolerandairconditioningapplications
• 28pieceset• Aluminiumandhardenedplasticconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10359
SPECIALIST TOOLSSTEERING
Rack and Pinion Tie Rod Tool
• Removesandrefitstierodends• ½”drive• Handyforhardtoreachrackends• 27mmto42mmrange
Part Number: GXT-10000
22
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSSTEERING
Rack Boot Installation Tool
• Installsmostrubbersteeringrackbootswithoutremovingthetierodend• Eliminatestheneedforalignment
Part Number: GXT-10010
SPECIALIST TOOLSDIffERENTIAL
Bearing Cup Remover - BTR IRS Carrier Bearings
• Presstoolforremovingthecarrierbearingcupsonthescrewadjustablecaps
• Allmetalconstruction• MadeinAustralia
Part Number: 0555-361682
Dana I.R.S. Screw Adjuster Tool
• ForeasysettingofcarrierbearingscrewadjustersinDanaSpicer,Model78/80/86independentrearsuspensiondifferentials
• Sturdysteelconstruction,forusewith½”squaredrivetools• MadeinAustralia
Part Number: 0555-361712
23
Ford IRS Differential Mounts and Installation Tool
• SuitablefortheremovalandinstallationofForddifferentialsupportbushes
-BA-FGFordFalcon(rear) -FordTerritories(frontandrear)• MadeinAustralia
Part Number: GGT-550
© Motospecs
SPECIALIST TOOLSDIffERENTIAL
Pinion Holding Tool - 2 Bolt
• ½”drive,steelconstruction• Usedtosecurethepinionflangetoenablenutremoval• 248mmlong• 47mmdiametercentralhole• 7mmwide,60mmlongmountingslots• MadeinAustralia
Part Number: 0555-361694
Pinion Holding Tool - Trilobe
• ½”drive,steelconstruction• Usedtosecurethepinionflangetoenablenutremoval• 180mmlong• 47mmdiametercentralhole• 3x7mmwide,35mmlongmountingslots• MadeinAustralia
Part Number: 0555-361700
Pinion Flange Puller
• Non-impactscrewtype• ForusewithPinionHoldingTools0555-361694and0555-361700• Fitssecurelyintocentralholeofpullers• Machinedtabstoallowholdingofpuller• MadeinAustralia
Part Number: 0555-361701
Shim Driver
• Usedfordrivingcarrierpreloadshimswithprecision• Allsteelconstruction• 5sizeset• MadeinUSA
Part Number: YTSD-01
24
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSDIffERENTIAL
Housing Spreader - Dana 30, 44, 60, 61, 70, 80
• Usedtospreadhousingforeasyfitmentofcarrierpreloadshims
• Lesschanceofbreakingshims• MadeinUSA
Part Number: YTS-01
SPECIALIST TOOLSTRANSMISSIONAisin Warner AW55-50SN / TR, Tf Series
Template - SLT, SLU, SLS on Car Adjustment• Usedtodrillholesinsidecovertobeabletoadjustsolenoidsincar• 3rivetssuppliedPart Number: AXT-550020
3 Pack of RivetsPart Number: AXT-55002530 Pack of RivetsPart Number: AXT-550026
Solenoid Repair Kit - AW55-50SN / TR/TF Series
• AllowsforthecompleteoverhauloftheAisin5and6speedSLsolenoids
Part Number: AXT-550000
50 Piece Bush Kit with ReamerPart Number: ABK-550030
Replacement ReamerPart Number: AXT-550030
SL Solenoid Repair Kit• AllowsforcompleteoverhaulofAisin5and6speedlargecanisterSLsolenoids• CanbeusedwithendcappedcanistersPart Number: AXT-55001050 Piece Bush Kit with ReamerPart Number: ABK-550030Replacement ReamerPart Number: AXT-550030
25
© Motospecs
SPECIALIST TOOLSTRANSMISSIONAisin Warner AW55-50SN / TR, Tf Series
SL Solenoid Bush Installation Aid
• Holdsandcentresbushwhilstpressingintosolenoidbody• Suitableforbothlargeandsmallcanistertypes
Part Number: AXT-55035
Rear Bush Case Repair TF60SN - TF Series / 09G, M, K
• UsedtoreplacetheC2supportbushintherearcasehousing• Comeswiththreereplacementbushes• MadeinAustralia
Part Number: AXT-650000
Oversize BushesPart Number: AB-650000
Servo Bore Tool - AW55-50 Series
• RepairsServoPinBores• Allowsreuseoftransmissioncase• Includes3oversizeServoBoreSleeves• Suits:AW55-50Series
Additional Sleeves Part Number: AB-550045
Servo Bore Tool - TF80-81SC
• RepairsServoPinBores• Allowsreuseoftransmissioncase• Includes3oversizeServoBoreSleeves• Suits:AWTF80/81SC
Additional sleevesPart Number: AB-600000
Part Number: AXT-550040
Part Number: AXT-600000
26
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONAisin Warner A750, A761, A960 Series
Spring Compressor - A750, A760, A761, A960 Series
• Forcompressing1st/revspringsubassemblytoremovecirclip• Boltincase• ToyotaandLexusapplication
Part Number: AXT-750010
4 Tooth Attachment - A750, A760, A761, A960 Series• Adjustablelegs• TobeusedwithAXT-750010
Part Number: AXT-750000
Aisin Warner A40 Series
Pump Alignment Strap - A40 Series
• Usedtoalignpumphalves• Stainlesssteelconstruction• MadeinAustralia
Part Number: AXT-3830
Chrysler 62TE, 42RLE, 5-45RfE, 68RfE & Jf011E
Chrysler Dip Stick
• UsedtodetermineTransmissionFluidlevel• Suits62TE,42RLE,5-45RFE,68RFE&JF011E• Flexibleshank• Metalhandle
Part Number: TXT-62000
27
© Motospecs
SPECIALIST TOOLSTRANSMISSIONford 5R55E, N, S, W
Pump Alignment - 5R55E
• Allmetalconstructionusedtotestforcorrectpumpalignmentafterassembly
• MadeinAustralia
Part Number: FXT-35200
Servo Bore Tool Kit - 5R55E
• Allowsre-sleevingofwornservopinbore,restoringcircuitintegrity• Includesguides,reamers,driftsand3bushsleeves
Individual Bush Sleeves Part Number: FB-36005
Servo Bore Tool Kit - 5R55N, S, W
• Allowsre-sleevingofwornservopinbore,restoringcircuitintegrity• Includesguides,reamers,driftsand6bushsleeves
Individual Bush SleevesOverdrive - Part Number: FB-36100Intermediate - Part Number: FB-36105
Pump Bush / Align - 5R55E, N, S, W
• Allmetalconstruction• 2pieceset• Usedtotestforcorrectpumpalignmentafterassemblyand
forcorrectlyinstallingthepumpbush• MadeinAustralia
Part Number: FXT-36000
Part Number: FXT-36005
Part Number: FXT-36100
28
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONford E40D, 4R100
Pump Alignment Strap - E40D / 4R100
• Usedtoalignpumphalves• Stainlesssteelconstruction• MadeinAustralia
Part Number: FXT-66030
ford BTR / ION / DSI M72-97LE
Pin Removal / Installer - BTR / ION / DSI M72-97LE
• Foruseonexternalselectorshaftpin• Allsteelconstruction• MadeinAustralia
Part Number: RXT-93300
Pin Removal / Installer - BTR / ION / DSI M72-97LE
• Foruseoninternalselectorshaftpin• Allsteelconstruction• MadeinAustralia
Part Number: RXT-93310
Replacement Pins - BTR / ION / DSI M72-97LE
• ForRXT-93300andRXT-93310• Allsteelconstruction• MadeinAustralia
Part Number: RXT-93302
29
© Motospecs
SPECIALIST TOOLSTRANSMISSIONford BTR / ION / DSI M72-97LE
Bush Removal / Refit - BTR / ION / DSI M72-97LE
• Changeextensionhousingbushwithoutremovinghousingfromtransmission
• Allsteelconstruction• MadeinAustralia
Part Number: RXT-93305
General Motors Trimatic / 4L30E
Overdrive Removal and Rebuild Kit - GM 4L30E
• Servoextractingtool• Springcompressor• Pistoninstallingsleeve• Alignmentpins
Part Number: JXT-54010
Selector Seal Tool - Short Shaft
• Removesandinstallsselectorseals• Shortshafttransmissions• Suitstransmissions:GMTH180,TH350,TH400,TH700,4L30E,
4L60/E-1995,Powerglide
Part Number: JXT-5180
Selector Seal Tool - Long Shaft
• Removesandinstallsselectorseals• Longshafttransmissions• Suitstransmissions:GMTH180,TH350,TH400,TH700,4L30E,
4L60/E,Powerglide
Part Number: JXT-5181
30
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONGeneral Motors Trimatic / 4L30E
FWD / Coast Piston Inner Sleeves - GM 4L60E, 65E
• 2pieceset• Precisionmachinedforclosetolerances• Allsteelconstruction• MadeinAustralia
Part Number: JXT-7020
Pump Alignment Strap - GM TH700-R4 / 4L60E, 65E
• Usedtoalignpumphalves• Stainlesssteelconstruction• MadeinAustralia
Part Number: JXT-7030
Pump Gear Aligning Sleeve - Trimatic / 4L30E
• Centresthepumpgears• Durablemetalconstruction
Part Number: JXT-54000
General Motors 4L60E, 65E
Reverse Input Sleeve Kit - GM 4L60E, 65E
• 2pieceset• Precisionmachinedforclosetolerances• Allsteelconstruction• MadeinAustralia
Part Number: JXT-7015
31
© Motospecs
Sealing Ring Resizer - GM TH700-R4 / 4L60E, 65E
• Makesthe4inputshaftTeflonringstheperfectsizeforeasyinstallation
• MadeinAustralia
Part Number: JXT-7000
SPECIALIST TOOLSTRANSMISSIONGeneral Motors 4L60E, 65E
Torx Plus Driver Bit
• Forremoving1stdesignbellhousingtocasebolts• TorxplusT-50+design
Part Number: 77000-HBK
Mortorq Driver Bit
• Forremoving2nddesignbellhousingtocasebolts• Mortorqdesign
Part Number: JXT-75200
Torx Extractor Set
• SpecificallydesignedforHex,Torx,TorxPlus,MortorqandSecurityTorx• 8pieceset• Sizes:3mm,4mm,5mm,6mm,7mm,8mm,10mm&12mm• 10mm,12mm&14mmdrive• Suppliedinablowmouldedstoragecase
Part Number: UXT-10341
32
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONGeneral Motors 4L60E, 65E
Cooler Line Disconnector
• Allowseasyremovaloftransmissioncoolerlines• Speciallydesignedtoworkintightplaces• SuitableforGMvehicles
Part Number: JXT-75000
General Motors 5L40E, 6L80E
Cooler Pipe Removal Pliers - GM 5L40E, 6L80E
• Quickandeasyonehandedoperation• BMW3-Series,X3,X5andLandRover1999-on
Part Number: JXT-550000
Tool Kit Sleeves - GM 5L40E
Part Number: JXT-550015
• Includesbothpistoninstallationsleevesandringresizers• Precisionmachinedsteelconstruction• Housedinsturdysteelcarrychest• 11pieceset
Cooler Line Disconnect Tool
Part Number: ZXT-619000
• Smallandeasytouseinconfinedplaces• SuitableforbothPowerSteeringandTransmissionoilcoolerlines• BMW3-Series,X3,X5andLandRover1999-on
33
© Motospecs
SPECIALIST TOOLSTRANSMISSIONGeneral Motors 5L40E, 6L80E
Circlip Pliers - GM 5L40E, 6L80E
• Forremovaloflargecentresupportretainingcirclip• Lockingmechanismincorporatedforuserssafety• Length:650mm• MadeinAustralia
Part Number: JXT-608010
Brake Kit - GM5L40E, 6L80E
• RetrofitkitforJXT-608000• Completewithtemplateandallfittingaccessories• MadeinAustralia
Part Number: JXT-608005
Replacement Tips - GM 5L40E, 6L80E
Part Number: JXT-608015
• ForJXT-608000andJXT-608010• MadeinAustralia
Bush Driver Set - GM 5L40E
• 10pieceset• Allmetalconstruction• Finishestoexactfactorydepth• MadeinAustralia
Part Number: JXT-550005
34
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONGetrag 6DCT450/470
Dual Mass Flywheel Wear Kit - Getrag 6DCT450/470
• Designedtotestaxialplayandfreeplayangle• Dialgaugeincluded• Steelconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10650
Clutch Aligning Tool - Getrag 6DCT450
• Alignsclutchtothedualmassflywheeldogteeth• Forreinstallingtransmissiontovehicle• OEMdesign• Suits:6DCT450modelsonly
Part Number: PXT-645000
Clutch Remove & Refit Tool - Getrag 6DCT450/470
• Loosensandtightensclutchdrumretainingnut• Lockingarmsallowsremovalofclutchdrum• OEMdesign• Suits:6DCT450/470models
Part Number: PXT-645005
Front Seal Cover Installer (Outer) - Getrag 6DCT450/470
• Appliesevenpressuretoinstallfrontcoversealwithoutdamage• Usedinconjunctionwith: -InnerInstallerToolPXT-645015(for6DCT450) -InnerInstallerToolsPXT-647000andPXT-647005(for6DCT470)• OEMdesign• Suits:6DCT450/470models
Part Number: PXT-645010
35
© Motospecs
SPECIALIST TOOLSTRANSMISSIONGetrag 6DCT450/470
Front Seal Cover Installer (Inner) - Getrag 6DCT450
• Guidesinnersealovercentralhub• UsedinconjunctionwithOuterSealInstallerToolPXT-645010• OEMdesign• Suits:6DCT450modelsonly
Part Number: PXT-645015
Front Seal Cover Installer (Inner) - Getrag 6DCT470
• Guidesinnersealovercentralhub• Usedinconjunctionwith -InnerSealInstallerToolPXT-647005 -OuterSealInstallerToolPXT-645010• OEMdesign• Suits:6DCT470modelsonly
Part Number: PXT-647000
Front Seal Cover Installer (Inner) - Getrag 6DCT470
• Guidesinnersealovercentralhub• Usedinconjunctionwith: -InnerSealInstallerToolPXT-647000 -OuterSealInstallerToolPXT-645010• OEMdesign• Suits:6DCT470modelsonly
Part Number: PXT-647005
Jatco RE0f09A/Jf010E
CVT Puller Tool - RE0F09A/JF010E
• AsfittedtotheNissanMurano• Easilyclampsandholdsforpushbeltremoval• Allsteelconstruction• MadeinAustralia
Part Number: NXT-11000
36
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONJatco RE0f10A/Jf011E
CVT Puller Tool
• Easilyclampsandholdsforpushbeltremoval• Allsteelconstruction• MadeinAustralia
Part Number: NXT-11100
Jatco fN4A-EL/fNR5, ford 4f27E
Servo Bore Tool Kit
• Allowsre-sleevingofwornservopinbore,restoringcircuitintegrity• Includesguides,reamers,driftsand3bushsleeves
Individual Bush SleevesPart Number: NB-14505
Mercedes 722.0, 100, 200, 300, 400, 500
Servo Spring Compressor - 722.0, 100, 200, 300, 400, 500
• CompressesandholdstheB1servo• Allmetalconstructions• Usesoriginalmountingposition• 2threadtypebolts
Part Number: MXT-50000
Spring Compressor - 722.0, 100, 200, 300, 400, 500
• Throughdrumdesign• ForK1,K2andB3applications• Fixedarmconstruction• Forremovingsnapringonplate
Part Number: MXT-40040
Part Number: NXT-14500
37
© Motospecs
SPECIALIST TOOLSTRANSMISSIONMercedes 722.0, 100, 200, 300, 400, 500
Selector Bush Pliers - 722. All
Part Number: MXT-60010
• ForremovingandinstallingnylonselectorbushesfoundonmostMercedesvehicles
• Alsosuitableforothermakesandmodels
Mercedes 722.300, 400, 500
Internal Piston Sleeve - 722.300, 500
• K1andK2pistonintocarrier• Allmetalconstruction• Suppliedwithedgeprotector• UsedwithMXT-40020
Part Number: MXT-40000
Sleeve and End Float Kit
Part Number: MXT-40020
722.400• 135mmK1sleeve
722.300, 500• 127mmK1andK2sleeve• 118mmK1sleeve• UsedwithMXT-40000
Internal Piston Sleeve - 722.300, 500
• Forinstallingreversepistonintorearofpumphousing• Allmetalconstruction• Suppliedwithedgeprotector
Part Number: MXT-40010
38
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONMercedes 722.300, 400, 500
Internal Piston Sleeve - 722.400
Part Number: MXT-40050
• Forinstallingreversepistonintorearofpumphousing• Allmetalconstruction• Suppliedwithedgeprotector
Sleeve Kit
Part Number: MXT-40030
722.300• K1andK2plunger
722.500• K1andK3plunger• Forextractingandinstallingplunger
Oil Pressure Testing Jig
• Dualmountedpressuregauges• 100psiand400psirespectively• 9adaptersincludedforbothhighandlowpressures• Dual2metresofhose• Hanginghook• Alsosuitableforothermakesandmodels
Part Number: UXT-10130
Mercedes 722.600, 700, 800, 900
Spring Compressor/Sleeve Kit
Part Number: MXT-60000
722.600, 900• Installationofreversepistonintofrontcover• CompressionforK1andK2circlip
722.600• CompressesclutchtoaccessretainingringonB½andK½
39
© Motospecs
SPECIALIST TOOLSTRANSMISSIONMercedes 722.600, 700, 800, 900
Dipstick - 722.600, 900
Part Number: MX-60020
• UsedtodeterminefluidlevelsonMercedesmodels1997andnewerforbothengineandtransmission
• Length:1220mm
Dipstick - 722.700, 800
• UsedtodeterminefluidlevelsonAandBclassvehicles• Length:920mm
Part Number: MXT-70000
VW 095-01P
Essential Kit
• Allowspulleyexpansionforremovalofchain• Preciseinstallingtoolsforcirclipandpinionseal• Pressingpinionshaft/pulleyintocase• MadeinAustralia
Part Number: VXT-15000
VW/Audi/Skoda 01J CVT
Pinion Service Tool Kit
• Safelyremovesandrefitsthecastellatedpinionretainingnut• Allowseasyremovalofthepinionshaft• Allowsinspectionandremovalofthemainpinionbearingandseal
Part Number: VXT-14000
40
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
Front Cover Support Jig
• Allowsremovalofforwardclutchdrumwhilstsupportingfrontcoverwithoutdamage
• MadeinAustralia
Part Number: VXT-15010
SPECIALIST TOOLSTRANSMISSIONVW/Audi/Skoda 01J CVT
Press Jig and Plate Tool Kit
• Usedtopresspinionshaftandpulleythroughcase• MadeinAustralia
Part Number: VXT-15005
VW/Audi/Skoda DSG 02E/OAM
01J Multi Spline Spanner
• Usetoremovethereversethreadedmultisplineretainingnutonthepinionshaft
• Allsteelconstruction• ½”drive• Precisionmachined• MadeinAustralia
Part Number: VXT-15015
Clutch Retaining Bar
Part Number: VXT-16000
• Foradjustingclutchendfloatclearanceonwettypedualclutchtransmissions
41
© Motospecs
SPECIALIST TOOLSTRANSMISSIONVW/Audi/Skoda DSG 02E/OAM
Dual Mass Flywheel Wear Kit
• Designedtotestaxialplayandfreeplayangle• Dialgaugeincluded• Steelconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10650
Clutch Service Kit - 0AM 7 Speed Dry Clutch
• Usedforremoving,reinstallingandadjustingclutchengagementbearings
• Includesclutchforkretainingbar• 7pieceset• Suits:0AM7Speeddryclutchtransmission• Suppliedinablowmouldedstoragecase
Part Number: VXT-17000
Zf 5HP18, 19, 24, 30
Socket - 5HP18, 19
Part Number: ZXT-50000
• 4pinsockettoremoveoutputflangeretainingnut• Impactdesign• Removeandrefit• ½”drive• SuitableforRWDvehiclesonly
Socket - 5HP24, 30
Part Number: ZXT-54000
• 6pinsockettoremoveoutputflangeretainingnut• Impactdesign• Removeandrefit• ½”drive• SuitableforRWDvehiclesonly
42
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONZf 6HP26
Bush Driver Set
• 8pieceset• Allmetalconstruction• Finishestoexactfactorydepth• SpecificallydesignedtobeusedwithBushKitZBK-626010• MadeinAustralia
Part Number: ZXT-626000
Transmission General
Diaphragm Press Rings
• 3pieceset• Allmetalconstruction• Canbeusedonotherdiaphragmtypedrums• MadeinAustralia• TobeusedwithUXT-10000press
Part Number: ZXT-626010
Press Adapter
• Allmetalconstruction• TobeusedwithZXT-626010whenusedinanormalpress• MadeinAustralia
Part Number: ZXT-626020
Universal Hydraulic Flaring Tool• Kitincludesvarioussizesofdiesandadapterstoenableflaringof
transmission,brakeandairconditioninglines• Push-connect:1⁄4”,5⁄16”,3⁄8”• Fuelline:5⁄16”,3⁄8”• Single/doubleflare:3⁄16”,1⁄4”,5⁄16”,3⁄8”,1⁄2”• Metricflare:4.75mm,6mm,8mm,10mm• Suppliedinablowmouldedstoragecase
Part Number: UXT-10351
43
© Motospecs
SPECIALIST TOOLSTRANSMISSIONGeneral Transmission
Universal Flaring Tool
• Kitincludesvarioussizesofdiesandadapterstoenableflaringoftransmission,brakeandairconditioninglines
• Includes5adapters:3⁄16”,1⁄4”,5⁄16”,3⁄8”,&1⁄2”• Designedfordoubleorsingleflareincopper,aluminium,brassand
softsteelfluidlines• Suppliedinablowmouldedstoragecase
Part Number: UXT-10352
Spring Compressor
• Throughtypeapplication• Largebaseplate• Canbeusedincase
Part Number: UXT-10100
Clutch Spring Compessor
• Throughtypedesign• 2legged,screwtype• Largebaseplate• Designedforonbenchapplications
Part Number: UXT-10101
Driver Kit
• 9piecebearingandbushdriver• Alloyconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10020
44
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONTransmission General
Driver Set - 52 Piece
• Usedtodrivebearings,bushesandseals• From18mmto65mm• 1x74mmdisc• Allsteelconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10021
Assembly Jig
• Uniquebasecanbesetonbenchormountedonenginestandformobility
• “C”type• Lockableposition• 1000poundsmax(450kg)workingload
Part Number: UXT-10120
CV Shaft Remover
• UsedtoremoveCVShaftsfromtransmissions• Slidehammerdesign• 48mmopenfork
Part Number: UXT-10072
Seal Puller
• Removesoilseals• Twintipsuitsmostapplications
Part Number: UXT-10170
45
© Motospecs
SPECIALIST TOOLSTRANSMISSIONGeneral Transmission
Extra Long Pick & Hook Set
• 8pieceset• 230mmlong• Softgriphandles• Suppliedinpouchcase
Part Number: UXT-10331
H Gauge Clearance Tool
• Usedtoeasilymeasureclutchandendclearances• Universaldesign
Part Number: UXT-10155
Oil Pan Separator
• Wide,tapered,roundbladeedge• Usedforwedgingbetweenmetalsurfacestobreakgaskethold• Idealforchemicallysealedsumps
Part Number: UXT-10190
Scraper Set 3 Piece
• Stainlesssteelblades• Timberhandles• Suppliedinprotectivepouch
Part Number: UXT-10191
46
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONTransmission General
Scraper Set 4 Piece
• Metalblades• Largeergonomichandles• 2narrowand2wideblades• 2longand2shortshanks• Suppliedinablowmouldedstoragecase
Part Number: UXT-10192
Sanding Pads 3M
• Quicklyremovescorkorpapergasketsandform-in-placegasketmaterialpriortoassembly
• Screwend,coarseT3,brown• 10pack
Part Number: 745500-10
Universal Pump Pulley - Screw Type
• Allsteelconstruction• Multifit• MadeinAustralia
Part Number: UXT-10150
Universal Spring Compressor - Screw Type
• 3heightsettings• Quickwindhandle• Quickreleasemechanism• Removablecentrebaseplateforusewithshaftstyleassemblies• MadeinAustralia
Part Number: UXT-10000
47
© Motospecs
SPECIALIST TOOLSTRANSMISSIONTransmission General
Spring Compressor
• Throughdrumdesign• 4xadjustableradiuscurvedlegs• Clutchdiameterfrom64mmto175mm
Part Number: UXT-10102
Accumulator Cleaners - All Transmissions
• Brushesworktodeglazeboreliningsurface• Removelightscratchesandsmallburs• Servicebores25mmto50mm
Part Number: AB100
Valve Body Bore Cleaners - All Transmissions
• Brushesworktodeglazeboreliningsurface• Removelightscratchesandsmallburs• Servicebores6mmto25mm
Part Number: BB100
Valve Body Rebuilding Tray
• 34variablesizecompartments• 340mmx450mm• Durableplasticconstruction
Part Number: UXT-10187
48
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONTransmission General
Diamond Hone
• Sonnaxfine-gritdiamondhone• Extendslifeofyourreamerbyremovingaluminiumbuild-up• Keepscuttingintegrity
Part Number: EZ-LAP
Digital Torque Wrench 1⁄4” Drive
• Inbuiltmemorywillholdupto50torquesettings• Measures6-30Nm• Accuracy±4%• Autoshutoff80seconds• Suppliedinablowmouldedstoragecase
Part Number: UXT-10205
Transmission Filling Kit 7.5L
• Manualleveroperated• Separatefillingcaponthereservoir• Outputcapacity:700cc/cycle• 8pieceadapterfillingkitincluded• Suitablefor:Audi,Ford,Mercedes722.9,NewMini,Porsche,Seat,
Skoda,VWanduniversalapplications
Part Number: UXT-10360
Selector Bush Pliers
• ForremovingandinstallingnylonselectorbushesfoundonmostMercedesvehicles
• Alsosuitableforothermakesandmodels
Part Number: MXT-60010
49
© Motospecs
SPECIALIST TOOLSTRANSMISSIONTransmission General
Oil Pressure Testing Jig
• Dualmountedpressuregauges• 100psiand400psirespectively• 9adaptersincludedforbothhighandlowpressures• Dual2metresofhose• Hanginghook
Part Number: UXT-10130
Fluid Line Stopper - 2 Piece Set
• Usedonfluidlinestostopflowafterdisconnection• Suitableforuseonflexiandsolidfluidlines• Suits3⁄8”,5⁄16”,1⁄2”pipeendsandbanjotype• Springloaded• Packof2
Part Number: UXT-10357
Fluid End Line Stopper
• Idealforsealingmetalflaredbrake,transmissioncoolingandfuelpipes• Screwtype• Suitspipesize4mmto10mm• Soldindividually
Part Number: UXT-10358
Master Line Disconnect Kit
• Suitableformostfuel,transmissioncoolerandairconditioningapplications
• 28pieceset• Aluminiumandhardenedplasticconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10359
50
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
SPECIALIST TOOLSTRANSMISSIONTransmission General
Fluid Line Disconnect Tool Kit
• Forseparatingfittingsontransmissioncooler,fuelandairconditioninglines
• Includessizes:1⁄4",5⁄16",3⁄8",1⁄2"• Suitableformostpopularapplications• Suppliedinablowmouldedstoragecase
Part Number: UXT-10354
Cooler Line Disconnector
• Allowseasyremovaloftransmissioncoolerlines• Speciallydesignedtoworkintightplaces• SuitableforGMvehicles
Part Number: JXT-75000
Anti Static - All Transmissions
• Groundstechniciantosafelyworkonallmechatronics• Comfortablesoftwristband• Alligatorclipforgrounding• Longspringlead
Part Number: UXE-10000
Wet Air Tester - Valve Body / Pump
• ClearPerspexforeasyvalvesight• Canbeusedtocheckforstickingvalvesandendplug
bores
Part Number: SWAT-P1
Transmission Diagnostic
51
© Motospecs
SPECIALIST TOOLSTRANSMISSIONTransmission Diagnostic
Glycol Contamination Test Kit
• Teststransmissionfluidtofindifitiscontaminatedwithglycol• Glycolcontaminationdoesnotalwaysalterthecolouroftheoil• Glycolcauseseventualfailureofthefrictionmaterialwithas
littleas1%glycol• Performsupto25tests
Part Number: UXT-10140
VEHICLE SPECIfICAUDI, SKODA, VOLKSWAGEN
Socket - CVT, Automatic, Manual, DSG
• ½”drivetamperfordrainplugremovalandrefitting• Willsuitothermakesandmodels• Automatic,manualandCVTapplications
Part Number: AXT-650100
Multi Spline CV Shaft Socket
• 78mminlength,½”drive• M18multispline• Impactsteelconstruction
Part Number: VXT-14140
Stabiliser Bar Engine - VW T5• Application:VWTransporterT52004-On,andother
applications• Usedforsupportingengineduringremovaland
installationofgearbox• Measurements:578mm(L)x1830mm(W)x145mm(H)• Includes2chainsand2hooks
Part Number: UXT-10166
52
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
Wrench - Haldex Final Drive
• SpecialisedtoolforremovalofcartridgefilteronHaldexfinaldriveassemblies
• Allenkeysuppliedfordrain• Allmetalconstruction
Part Number: VXT-10000
VEHICLE SPECIfICAUDI, SKODA, VOLKSWAGEN
Socket - CVT, Automatic, Manual, DSG
• ½”drivemultisplineforremovaloftheretainingboltsontheinnerCVshaftflange
• Impactconstruction• 800mmintotallength• AvailableinM8,M10,M12,M14sizes
Part Number: VXT-14130M8
Part Number: VXT-14120M10
Part Number: VXT-14110M12
Part Number: VXT-14100M14
53
© Motospecs
VEHICLE SPECIfICAUDI, SKODA, VOLKSWAGEN
fORD COURIER / MAZDA BRAVO
Crank Turning Socket• 1⁄2”drive,22mmsquareand12mmrotatingpivotpin• ApplicabletoVW,Audi,SeatandSkodaengines: 2.4LV6,3.2LV6,4.2LV8,5.2LV10• Locksintopulleyretainingbolts
Part Number: VXT-10010
Dual Mass Flywheel Wear Kit
• Designedtotestaxialplayandfreeplayangle• Dialgaugeincluded• Steelconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10650
Cluster Bearing Remover - M5/R5 (Sump and Non Sump Type)
• Allowseasyremovalofthecaseclusterbearings• Holdsfromtheretainingclipgroove• Allmetalconstruction• MadeinAustralia
Part Number: UXT-70000
fORD fALCON BA-fG TERRITORY
Ford IRS Differential Mounts and Installation Tool
• SuitablefortheremovalandinstallationofForddifferentialsupportbushes
-BA-FGFordFalcon(rear) -FordTerritories(frontandrear)• MadeinAustralia
Part Number: GGT-550
54
© Motospecs www.drivetech.com.au • www.drivetech.org.nz
VEHICLE SPECIfICfORD MONDEO / fOCUS
HOLDEN RODEO / ISUZU D-MAX
MERCEDES
Dual Mass Flywheel Wear Kit
• Designedtotestaxialplayandfreeplayangle• Dialgaugeincluded• Steelconstruction• Suppliedinablowmouldedstoragecase
Part Number: UXT-10650
Isuzu Crankshaft and Oil Seal
• Replacementandinstallationtool• Accuratelyremovesandinstallsbothfrontandrearseals• Suitsengines:4BE,4HF1,4HG1,4JG,6HH1and6HK1
Part Number: UXT-10230
Dipstick Set - Engine & Transmission• 4pieceset• Transmission:Green920mm.Suits722.7/8• Transmission:Red1220mm.Suits722.6/9• Engine:Blue930mmVolute.SuitsEngine112,
113,271,272,273,279,646,647,648,651• Engine:Yellow930mmStraight.SuitsEngine
103.943/984/985,104,111,119,120,137,603.913/963/97,604,605,606,611,612/965,613,628,629,647,648,651
Part Number: MXT-10000
55
© Motospecs
VEHICLE SPECIfICTOYOTA LANDCRUISER 60, 70, 80, 100 SERIES / HILUX
Gear Lever Remover - 60 and 70 Series LandCruiser
• Allowsoncarremovalofgearlever• Allmetalconstruction• MadeinAustralia
Part Number: UXT-40010
Gear Lever Remover - 80 and 100 Series LandCruiser, All HiLux
• Allowsoncarremovalofgearlever• Allmetalconstruction• MadeinAustralia
Part Number: UXT-40000
56
Specialist know how to help you select the right gear.
Oil Coolers
Manual Transmission
Automatic Transmission
Additives & Fluids Specialist Tools Power Steering
Differential
aBn 97 097 993 283
australia
2c glendenning roadglendenning nsW 2761
Phone 1800 463 646
www.drivetech.com.au
new Zealand
278 church streetPenrose auckland 1061
Phone 0800 333 125
www.drivetech.org.nz