TRUNNION
BALL VALVE VALVEVVAVVALVEVALVE
BA-1401D (EN)
MISSIONSTATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
TRUNNION BALL VALVE
TABLE OF INDEX PAGE
Introduction, Features 3-4
Scope of Products, Split Body 5
Scope of Products, Welded Body 6
Overview, 2-Piece Split Body 7
Overview, 3-Piece Split Body 8
Overview, Welded Body 9
Dimensions and Weights, Class 150 (PN 20) 10-11
Dimensions and Weights, Class 300 (PN 50) 12-13
Dimensions and Weights, Class 600 (PN 100) 14-15
Dimensions and Weights, Class 900 (PN 150) 16
Dimensions and Weights, Class 1500 (PN 250) 17
Dimensions and Weights, Class 2500 (PN 420) 18
Top Mounting Dimensions and Torque 19-23
Gear Operators, Dimensions and Weights 24
Seat and Seal Material, Selection Guide 25
Flow Coefficient, Specification Table 26
Valve Figure Number, How To Order 27-28
2
TRUNNION BALL VALVE
This page is intentionally left blank.
3
TRUNNION BALL VALVE
INTRODUCTION FEATURES
INTRODUCTION
A ball valve is a valve with a spherical disc, the part of
the valve which controls the flow through it. The sphere
has a hole, or port, through the middle so that when the
port is in line with both ends of the valve, flow will
occur. When the valve is closed, the hole is
perpendicular to the ends of the valve, and flow is
blocked.
A trunnion ball valve has additional mechanical
anchoring of the ball at the top and the bottom,
suitable for larger and higher pressure services. To
ensure tight sealing at low pressure, high-tensile
springs force the seats against the ball while at higher
pressure, the medium pressure pushes upstream seat
towards the ball.
EMERGENCY SEALS
For trunnion mounted ball valve size NPS 6 (DN 150)
and above, it comes with provisions for sealant injection
on both the stem and seat while for sizes NPS 5 (DN
125) and below on body cavity. In case of failed
underperformed seals, a temporary emergency seal can
be achieved by injecting sealants.
ANTI-STATIC
Because the ball and stem in a ball valve are suspended
on non-metallic parts, i.e. the seat seal and stem seal,
there is a possibility a static charge may build up on the
stem-ball, a mechanical (antistatic metal spring and
ball) is introduced in the design to maintain the metal-
to-metal contact between the rotating ball/stem and
the valve body which will ground any charges to the
valve body.
BLOWOUT PROOF STEM
The valve stem is made with a shoulder at the bottom
end. It’s securely retained by the stuffing box, to avoid
that the stem, under certain operating conditions,
accidentally blows out. Other designs are available on
request.
Seat Sealant Valve Stem Sealant Valve
Stem
Antistatic Assembly
Stem
Stuffing box
Body
Ball
4
TRUNNION BALL VALVE
INTRODUCTION (CONT’D) FEATURES
FIRE SAFE DESIGN
During a fire, non-metallic soft material will be burnt,
subsequently seat leakage or external leakage may
occur and cause the fire spread or contaminate the
environment. FBV ball valves are fire tested in
accordance with API 6FA or API 607, witnessed and
certified by TUV SUD. If valve is not covered according
to the standards, they are designed to be fire safe.
Seat after fire
Closure Gasket
Body jointafter fire
Closure Gasket Body
Body joint before fire
Closure Gasket O-ring Body
Gland before fire
Body
Gasket Stuffing box O-ring
Stem
Glandafter fire
Body Stem
Gasket Stuffing box
Stem before fire
O-ring Packing Stem
Stem after fire
Packing Stem
Seat before fire
Ball
O-ring Seat insert Gasket Closure
DOUBLE PISTON EFFECT
Closure
O-ring Gasket Seat retainer Seat Insert Valve cavity Ball
The different in area (D) times the line pressure creates a
“piston effect” force which pushes the seat against the ball
surface resulting in a tight seal.
(I) Downstream Valve Seat
Closure
The difference in the area (D) times the cavity pressure
creates a “piston effect” force which pushes the seat
against the ball surface resulting in a tight seal.
(II)Upstream Valve Seat
(Valve)
O-ring Gasket Seat retainer Seat Insert Valve cavity Ball
Closure
(I) Downstream Valve Seat
SINGLE PISTON EFFECT
The difference in area (D) times the line pressure creates a
“piston effect” force which pushes the seat against the ball
surface resulting in a tight effect seal.
Closure
When the pressure in the valve cavity reaches a level that
the total force from cavity acting on the seat is larger than
the total force from upstream line pressure, the seat will
be pushed away from the ball to relief the valve cavity
pressure.
(II) Upstream Valve Seat
5
TRUNNION BALL VALVE
SCOPE OF PRODUCTS SPLIT BODY
Legends: A – Available in Casting and Forging B – Available in Casting Only C – Available Forging Only
D– Not Usually Required E – Casting Not Recommended
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
½ 15
¾ 20
1 25
1 ½ 40 A, E A, E A, E A, E A, E C
2 50
A A A A, E A, E C
2.5 65
A A A A, E A, E C
3 80
A A A A, E A, E C
4 100
A, D A, D A, D,E A, D A, D, E C, D
6 150 A A A A, E A, E C
8 200 A A A A, E A, E C
10 250
A A A A, E A, E C
12 300
A A A A, E A, E C
14 350
A A A A, E A, E C,D
16 400
A A A A, E A, E C,D
18 450 A A A A, E A, E C,D
20 500 A A A A, E A, E C,D
22 550
A A A A, E A, E C,D
24 600
A A A A, E A, E C,D
26 650
A A A A, E A, E C,D
28 700
A A A A, E A, E C,D
30 750 A A A A, E A, E C,D
32 800 A A A A, E A, E C,D
34 850
A A A A, E A, E C,D
36 900
A A A A, E A, E C,D
38 950
A, E A, E A A, E A, E C,D
40 1000
A, E A, E A A, E A, E C,D
42 1050 A, E A, E A A, E A, E C,D
48 1200 A, E A, E A A, E A, E C,D
56 1400
A, E A, E A
6
TRUNNION BALL VALVE
SCOPE OF PRODUCTS WELDED BODY
Legends: A – Available in Casting and Forging B – Available in Casting Only C – Available Forging Only
D – Not Usually Required E – Casting Not Recommended
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
½ 15
¾ 20
1 25
1 ½ 40 C C C C C C
2 50
C C C C C C
2.5 65
C C C C C C
3 80
C C C C C C
4 100
C,D C,D C,D C,D C,D C, D
6 150 C C C C C C
8 200 C C C C C C
10 250
C C C C C C
12 300
C C C C C C
14 350
C C C C C C
16 400
C C C C C C
18 450 C C C C C C
20 500 C C C C C C
22 550
C C C C C
24 600
C C C C C
26 650
C C C C
28 700
C C C C
30 750 C C C C
32 800 C C C
34 850
C C C
36 900
C C C
38 950
C C C
40 1000
C C C
42 1050 C C C
48 1200 C C C
56 1400
C C C
7
TRUNNION BALL VALVE
OVERVIEW 2-PIECE SPLIT BODY
PART LIST
4 5 7 6 9 8 1
A
30
28
29
19
18
14
10
1
17
B
12
11
13
30
4
Seat seal 9
Body 1
Closures 2
Ball 3
Stem 4
Seat insert 5
Seat retainer 6
Seat spring 7
Seat O-ring 8
Stem packing 10
Stem O-ring 11
Stem bushing 12
Thrust washer 13
Stuffing box 14
Gland cover 15
Gland socket bolt 16
Gland pin 17
Gland seal 18
Gland O-ring 19
Trunnion 20
Trunnion socket bolt 21
Trunnion bushing 22
Trunnion thrust washer 23
Trunnion O-ring 24
Body seal 25
Stud bolt & nut 26
Vent valve 27
Drain plug 28
Stem sealant valve 29
Antistatic assembly 30
Stopper 31
Lever 32
Lever lock screw 33
Extension pipe 34
Pipe lock screw 35
TYPICAL MATERIALS Body/Closures A105, A182 F304, F304L, F316, F316L, F51, F53,
A350 LF2, LF3, LF5, Monel, Inconel, Hastelloy (Forging) A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2 (Casting)
Ball CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS+TCC, CS+Ni60
Seat retainer CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS+TCC, CS+Ni55
Seat insert PTFE, RPTFE, Nylon, Devlon, PEEK
Stem A182 F6a, F316, F51, A105+ENP, AISI 4140+ENP, 17-4PH
Packing Graphite, PTFE, RPTFE
O-ring Viton, NBR, HNBR, AFLAS
C
3
23
20
22
1
24
Casting Steel
29
27
28
A
B
35
34
33
32
31
15
16
20
14
25
1
26
21
4
2
3
C
STANDARDS Design& manufacture API 6D, ISO 14313, ISO 17292
Face-to-face API 6D, ASME B16.10
End flanges ASME B16.5, ASME B16.47 MSS SP-44 (NPS 22 Only)
Test & inspection API 6D, API 598
Fire safe API 6FA, API 607
Other NACE MR01-75, MR 0103
ISO 15848, API 622, API 624
Forging Steel
A
B
C
35
34
33
32
31
16
15
20
14
1
25
26
21
4
2
3
8
TRUNNION BALL VALVE
OVERVIEW 3-PIECE SPLIT BODY
Forging Steel
20
A
21 3 7 6 9 8 2
Casting Steel
31 28 29
36
18
16
35
4
30
25
1
27
24
33
34
14
3
23
26
22
A
B
C
5
PART LIST
C
13
11
4
14
4
32
32
B
4 13 12 10 15 14 19 17 11 1
Body 1
Closures 2
Ball 3
Stem 4
Seat insert 5
Seat retainer 6
Seat spring 7
Seat O-ring 8
Seat seal 9
Stem packing 10
Stem O-ring 11
Stem bushing 12
Thrust washer 13
Stuffing box 14
Gland cover 15
Gland socket bolt 16
Gland pin 17
Gland bolt & nut 18
Gland seal 19
Trunnion support 20
Trunnion support pin 21
Bushing 22
Thrust washer 23
Trunnion socket bolt 24
Trunnion 25
Body seal 26
Stud bolt & nut 27
Vent valve 28
Drain plug 29
Seat sealant valve 30
Stem sealant valve 31
Antistatic assembly 32
Drive key 33
Gearbox assembly 34
Supporting leg 36
Lifting lug 35
TYPICAL MATERIALS Body/Closures A105, A182 F304, F304L, F316, F316L, F51, F53,
A350 LF2, LF3, LF5, Monel, Inconel, Hastelloy (Forging) A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2 (Casting)
Ball CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS+TCC, CS+Ni60
Seat retainer CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS+TCC, CS+Ni55
Seat insert PTFE, RPTFE, Nylon, Devlon, PEEK
Stem A182 F6a, F316, F51, A105+ENP, AISI 4140+ENP, 17-4PH
Packing Graphite, PTFE, RPTFE
O-ring Viton, NBR, HNBR, AFLAS
STANDARDS Design& manufacture API 6D, ISO 14313, ISO 17292
Face-to-face API 6D, ASME B16.10
End flanges ASME B16.5, ASME B16.47 MSS SP-44 (NPS 22 Only)
Test & inspection API 6D, API 598
Fire safe API 6FA, API 607
Other NACE MR01-75, MR 0103
ISO 15848, API 622, API 624
A
22
23
15
35
30
14
1
3
20
21
2
33
34
4
16
28
27
36
31 28
B
9
TRUNNION BALL VALVE
OVERVIEW WELDED BODY
B
5
6
9
7
3
8
2
TYPICAL MATERIALS
Body/Closures A105, A182 F304, F304L, F316, F316L, F51, F53 A350 LF2, LF3, LF5, Monel, Inconel, Hastelloy (Forging only)
Ball CS+ENP, A182 F304, F304L, F316, F316L, F51, F53 CS+TCC, CS+Ni60
Seat retainer CS+ENP, A182 F304, F304L, F316, F316L, F51, F53 CS+TCC, CS+Ni55
Seat insert PTFE, RPTFE, Nylon, Devlon, PEEK
Stem A182 F6a, F316, F51, A105+ENP, AISI 4140+ENP, 17-4PH
Packing Graphite, PTFE, RPTFE
O-ring Viton, NBR, HNBR, AFLAS
STANDARDS
Design& manufacture API 6D, ISO 14313, ISO 17292
Face-to-face API 6D, ASME B16.10
End flanges ASME B16.5, ASME B16.47 MSS SP-44 (NPS 22 Only)
Test & inspection API 6D, API 598
Fire safe API 6FA, API 607
Other NACE MR01-75, MR 0103
ISO 15848, API 622, API 624
31
18
16
4
1
27
26
2
21
24
32
19
29
3
30 28 25
22
23
A
B
A
10
14
19
20
12
11
17
13
15
Body 1
Ball 3
Closures 2
Stem 4
Trunnion support bushing 22
Seat retainer 6
Stem packing 10
Stem bushing 12
Seat O-ring 8
Trunnion support 21
Gland pin 17
Gland seal 19
Seat spring 7
Seat seal 9
Stem O-ring 11
Gland cover 15
Thrust washer 13
Gland bolt & nut 18
Gland socket bolt 16
Stuffing box 14
Seat Insert 5
Trunnion support thrust washer 23
Body seal 24
PART LIST
Vent valve 25
Drain plug 26
Seat sealant valve 27
Stem sealant valve 28
Gearbox assembly 31
Drive key 30
Antistatic assembly 29
Supporting leg 32
Gland O-ring 20
10
TRUNNION BALL VALVE
ASME CLASS 150 (PN 20) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2 50
1.93 49
1.93 49
7 178
7.5 191
8.5 216
3.4 86
5.3 135
5.9 150
3.1 79
4.6 117
5.9 150
40 18
35 16
2 ½ 65
2.44 62
2.44 62
7.5 191
8 203
9.5 241
3.9 100
5.9 150
7.3 185
3.6 92
5.7 145
7.1 180
53 24
48 22
3 80
2.91 74
2.91 74
8 203
8.5 216
11 283
4.9 125
6.3 161
7.8 198
4 102
5.6 141
7.7 195
73 33
66 30
4 100
3.94 100
3.94 100
9 229
9.5 242
12 305
5.2 132
7.5 190
9 230
4.8 123
6.7 170
9 230
110 50
99 45
5 125
5 127
5 127
14 356
14.53 369
14 356
6.1 155
8.1 205
11.2 285
5.9 150
7.9 200
11 280
238 108
224 102
6 150
5.91 150
5.91 150
15.5 394
16 407
18 457
7.2 184
9.2 233
12.6 320
6.6 168
8.7 222
12.1 308
319 145
286 130
8 200
7.91 201
7.91 201
18 457
18.5 470
20.5 521
9 228
10 253
15.7 398
9 230
10 255
15.3 388
562 255
368 235
10 250
9.92 252
9.92 252
21 533
21.5 546
22 559
10.6 268
11.4 290
19.1 485
11.2 285
11.8 300
18.7 475
859 390
811 368
12 300
11.94 303
11.94 303
24 610
24.5 623
25 635
12.9 327
15.6 395
22.2 565
13.4 340
14.4 340
21.4 543
1,342 610
1232 560
14 350
13.15 334
13.15 334
27 686
27.5 699
30 762
14.8 375
15.6 395
14 610
14.2 360
15 381
23.5 598
1718 780
1652 750
16 400
15.16 385
15.16 385
30 762
30.5 775
33 838
16 405
17.8 452
27.9 708
15.7 400
16.5 419
26.7 678
2640 1200
2420 1100
18 450
17.17 436
17.17 436
34 864
34.5 877
36 914
18.3 465
18.5 470
30.1 765
18.1 460
18.5 470
29.9 760
3304 1500
3124 1420
20 500
19.17 487
19.17 487
36 914
36.5 927
39 991
21.7 550
21.7 550
34.3 870
19.3 490
19.9 505
33.1 840
4207 1910
4075 1850
22 550
21.19 538
21.19 538
39 991
39.5 1003
43 1092
19.1 485
19.1 550
37 940
18.9 480
21.5 545
36.8 935
4928 2240
4774 2170
24 600
23.19 589
23.19 589
42 1067
42.5 1080
46 1143
24 610
24.1 612
40.4 1026
23.6 600
23.9 607
39.8 1010
6820 3100
6006 2730
26 650
24.94 633
24.94 633
45 1143
(1) 49 1245
24.8 630
26 660
43.7 1110
24.5 623
25.6 651
42.5 1080
7048 3200
6894 3130
28 700
26.94 684
26.94 684
49 1245
(1) 53 1346
27 685
28 700
46.3 1175
26.8 680
27.2 690
45.6 1157
7963 3615
7963 3540
30 750
28.94 735
28.94 735
51 1295
(1) 55 1397
28 710
30.6 777
49.8 1265
29 737
29 737
48.8 1240
11814 5370
10780 4900
32 800
30.69 779
30.69 779
54 1372
(1) 60 1524
30.3 770
30.7 780
45.1 1145
30.1 765
30.5 775
52.6 1335
13310 6050
12716 5780
34 850
32.69 830
32.69 830
58 1473
(1) 64 1626
31.3 795
30.9 785
45.3 1150
30.7 780
30.3 770
44.5 1130
15180 6900
14146 6430
36 900
34.41 874
34.41 874
60 1524
(1) 68 1727
35.6 905
34.4 875
58.3 1480
33.5 850
33.5 852
57.8 1468
18920 8600
16720 7600
40 1000
38.44 976
38.44 976
70.87 1800
(1) 70.87 1800
37 940
37 940
66.9 1700
36.6 930
36.6 930
64.2 1630
24200 11000
21340 9700
42 1050
40.19 1010
40.19 1010
74.8 1900
(1) 74.8 1900
38.4 975
38.4 975
66.9 1700
37.4 950
37.94 950
66.5 1690
31900 14500
24816 11280
48 1200
45.94 1166
45.94 1166
82.68 2100
(1) 82.68 2100
42.7 1085
45.3 1150
76.4 1940
42.3 1075
43.3 1100
76 1930
39600 18000
35420 16100
56 1400
53.56 1360
53.56 1360
94.49 2400
(1) 94.49 2400
50.4 1280
51.6 1310
90.2 2290
50 1270
51.6 1310
89.6 2275
61600 28000
55660 25300
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 150 ( PN 20)
11
TRUNNION BALL VALVE
ASME CLASS 150 (PN 20) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2x1 ½ 50x40
1.93 49
1.5 38
7 178
7.5 191
8.5 216
3.3 85
4.9 125
5.9 150
3 75
4.3 110
5.9 150
33 15
26 12
2 ½ x2 65x50
2.44 62
1.93 49
7.5 190
8 203
9.5 241
3.3 86
5.3 135
7.1 180
3.1 79
4.6 117
7.1 180
49 22
42 19
3x2 80x50
2.94 74
1.93 49
8 203
8.5 216
11.13 283
3.3 86
5.3 135
7.5 190
3.1 79
4.6 117
7.5 190
68 31
48 22
4x3 100x80
3.94 100
2.94 74
9 229
9.5 241
12 305
4.9 125
9.1 230
7.8 198
4 102
5.5 141
9.1 230
97 44
81 37
6x4 150x100
5.94 150
3.94 100
15.5 394
16 406
18 457
5.5 140
7.5 190
11 280
4.8 123
6.7 170
11 280
264 120
209 95
8x6 200x150
7.94 201
5.94 150
18 457
18.5 470
20.5 521
7.2 184
9.2 233
13.6 345
6.8 172.5
8.7 222
13.6 345
463 210
414 188
10x8 250x200
9.94 252
7.94 201
21 533
21.5 546
22 559
9 228
10 253
1.6 405
9.1 230
10 255
15.9 405
728 330
671 305
12x10 300x250
11.94 303
9.94 252
24 610
24.5 622
25 635
10.6 268
11.4 290
19.1 485
11.2 285
11.8 300
19.1 485
1123 510
925 420
14x10 350x250
13.19 334
9.94 252
27 686
27.5 699
30 762
10.6 268
11.4 290
21 535
11.2 285
11.8 300
21 535
1542 700
1211 550
16x12 400x300
15.19 385
11.94 303
30 762
30.5 775
33 838
12.9 327
15.6 395
22.2 565
13.4 340
13.4 340
23.4 595
2004 910
1674 760
18x14 450x350
17.19 436
13.19 334
34 864
34.5 877
36 314
14.8 375
15.6 395
25 635
14.2 360
15 381
25 635
2974 1350
2600 1180
20x16 500x400
19.19 487
15.19 385
36 914
36.5 927
39 991
15.9 405
17.8 452
27.9 708
15.7 400
21.7 419
27.6 700
3722 1690
3304 1500
24x20 600x500
23.19 589
19.19 487
42 1067
42.5 1080
45 1143
21.7 550
21.7 550
34.3 870
19.3 490
19.9 505
33.1 840
5352 2430
4780 2170
30x24 750x600
28.94 735
23.19 589
51 1295
(1) 55 1397
24 610
24.1 612
40.4 1026
23.6 600
23.9 607
39.8 1010
9097 4130
8150 3700
36x30 900x750
34.44 874
28.94 735
60 1524
(1) 68 1727
28 710
30.6 777
49.8 1265
29 737
29 737
48.8 1240
16300 74100
14978 6800
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 150 ( PN 20)
12
TRUNNION BALL VALVE
ASME CLASS 300 (PN 50) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2 50
1.93 49
1.93 49
8.5 216
9.13 232
8.5 216
3.6 91
5.3 135
6.5 165
3.3 83
4.6 117
6.5 165
62 28
51 23
2 ½ 65
2.44 62
2.44 62
9.5 241
10.12 257
9.5 241
3.7 95
5.9 150
7.3 185
3.6 92
5.7 145
7.1 180
77 35
73 33
3 80
2.94 74
2.94 74
11.13 282
11.75 298
11.13 283
5 126
6.3 161
8.3 210
4.1 105
5.6 141
8.3 210
95 43
88 40
4 100
3.94 100
3.94 100
12 305
12.63 321
12 305
5.2 132
7.5 190
10 255
5 128
6.7 170
10 255
152 69
143 65
5 125
5 125
5 125
15.75 400
16.26 413
15.75 400
6.3 160
8.3 210
11.6 295
6.1 155
8 202
11.2 285
328 149
304 138
6 150
5.94 150
5.94 150
15.88 403
16.5 419
18 457
7.4 189
9.2 233
13 330
6.6 168
8.7 222
12.6 320
396 180
308 140
8 200
7.91 201
7.91 201
19.75 502
20.38 518
20.5 521
9 228
10 253
15.7 398
9.3 235
10 255
15.4 392
647 294
539 245
10 250
9.92 252
9.92 252
22.38 568
23 584
22 559
10.6 268
11.4 290
10.1 485
11.4 290
12 305
19.1 485
976 443
903 410
12 300
11.94 303
11.94 303
25.5 648
28.13 664
25.5 635
12.9 327
15.6 395
23.2 590
13.4 340
13.4 340
21.8 554
1542 700
1432 650
14 350
13.19 334
13.19 334
30 762
30.62 778
30 762
15.2 385
15.7 400
24.8 630
14.5 368
15 384
23.9 606
2042 927
1949 885
16 400
15.19 385
15.19 385
33 838
33.63 854
33 838
15.9 405
17.8 452
28.2 716
16.5 420
16.5 419
27.1 689
2863 1300
2731 1240
18 450
17.19 436
17.19 436
36 914
36.63 930
36 914
18.9 480
19.3 490
31.5 800
18.5 470
18.9 480
30.7 780
3744 1700
3480 1580
20 500
19.17 487
19.17 487
39 991
39.75 1010
39 991
21.7 550
21.7 550
34.3 870
19.5 495
19.9 505
33.5 850
5066 23000
4405 2000
22 550
21.19 538
21.19 538
43 1092
43.88 1114
43 1092
20.3 515
21.7 550
37.8 960
20.1 510
21.5 545
37.2 945
5390 2450
4840 2200
24 600
23.19 589
23.19 589
45 1143
45.888 1165
45 1143
24 610
24.8 630
40.6 1030
24.8 630
23.9 607
40.9 1038
8436 3830
7600 3450
26 650
24.94 633
24.94 633
49 1245
50 1270
49 1245
28.4 630
26 660
43.1 1095
24.5 623
25.6 651
42.7 1085
9295 4220
8480 3850
28 700
26.94 684
26.94 684
53 1346
54 1372
53 1346
27.6 700
28 710
46.9 1190
27.2 690
27.6 700
46.3 1175
10604 4820
9372 4260
30 750
28.94 735
28.94 735
55 1397
56 1422
55 1397
28 710
30.6 777
49.8 1265
29.4 747
29.4 747
49.8 1266
12320 5600
11330 5150
32 800
30.69 779
30.69 779
60 1524
61.13 1552
60 1524
30.7 780
31.1 790
53.1 1350
30.3 770
30.7 780
53 1345
15088 6850
13767 6250
34 850
32.69 830
32.69 830
64 1626
65.1 1654
64 1626
31.9 810
30.5 775
47.8 1215
31.9 810
30.5 775
47.8 1215
15510 7050
14190 6450
36 900
34.41 874
34.41 874
68 1727
69.13 1756
68 1727
35.6 905
34.4 875
58.3 1480
34 864
34 864
58.7 1492
19800 9000
18480 8400
40 1000
38.44 976
38.44 976
76.77 1950
(1) 76.77 1950
37 940
37 940
65 1650
36.6 930
36.6 930
64.6 1640
24200 11000
22660 10300
42 1050
40.19 1020
40.19 1020
82.68 2100
(1) 82.68 2100
38.2 970
38.2 970
66.9 1700
37.8 960
37..8 960
66.5 1690
31900 14500
29920 13600
48 1200
45.94 1166
45.94 1166
85.43 2170
(1) 85.43 1270
44.1 1120
44.1 1120
77.4 1965
43.3 1100
43.3 1100
76.6 1945
39600 18000
37620 17100
56 1400
53.56 1360
53.56 1360
98.43 2500
(1) 98.43 2500
50.4 1280
53.1 1350
90.4 2295
50 1270
52.2 1325
89.8 2282
60060 27300
56760 25800
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 300 (PN 50)
13
TRUNNION BALL VALVE
DIMENSIONS AND WEIGHTS ASME CLASS 300 (PN 50)
ASME CLASS 300 (PN 50) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2x1 ½ 50x40
1.93 49
1.5 38
8.5 216
9.11 232
8.5 216
3.5 90
5.1 130
6.5 165
3.3 83
4.3 110
6.5 165
48 22
41 18.5
2 ½ x2 65x50
2.44 62
1.93 49
9.5 241
10.13 257
9.5 241
3.6 91
5.3 135
6.5 165
3.3 83
4.6 117
7.5 190
62 28
55 25
3x2 80x50
2.94 74
1.93 49
11.13 283
11.75 298
11.13 283
3.6 91
5.3 135
8.3 210
3.3 83
4.6 117
8.3 210
81 37
75 34
4x3 100x80
3.94 100
2.94 74
12 305
12.63 321
12 305
5 128
6.3 161
10 255
5 128
5.6 141
10 255
119 54
90 41
6x4 150x100
5.94 150
3.94 100
15.88 403
16.5 419
18 457
6.3 160
7.5 190
12.6 320
6.3 160
6.7 170
12.6 320
242 110
187 85
8x6 200x150
7.94 201
5.94 150
19.75 518
20.38 518
20.5 521
7.5 190
9.2 233
15 380
7.5 190
8.7 222
15 380
495 225
451 205
10x8 250x200
9.94 252
7.94 201
22.38 568
23 584
22 559
9 228
10 253
17.5 445
9.3 235
10 255
17.5 445
803 365
748 340
12x10 300x250
11.94 303
9.94 252
25.5 648
26.13 664
25 635
10.6 268
11.4 290
20.5 520
11.4 290
12 305
20.5 520
1320 600
1239 563
14x10 350x250
13.19 334
9.94 252
30 762
30.63 778
30 762
10.6 268
114 290
23 585
11.4 290
12 305
23 585
1762 800
1432 650
16x12 400x300
15.19 385
11.94 334
33 838
33.63 854
33 838
12.9 327
15.6 395
23.2 590
13.4 340
13.4 340
21.8 554
2445 1110
2269 1030
18x14 450x350
17.19 436
13.19 334
36 914
36.62 930
36 914
15.2 385
15.7 400
28 710
14.5 368
15.1 384
28 710
3300 1500
3102 1410
20x16 500x400
19.19 487
15.19 385
39 991
49.75 1010
39 991
16 405
17.8 452
28.2 716
16.5 420
16.5 419
27.1 689
4626 2100
4185 1900
24x20 600x500
23.19 589
19.19 487
45 1143
45.88 1165
45 1143
21.7 550
21.7 550
36 915
19.5 495
19.9 505
36 915
6057 2750
5617 2550
30x24 750x600
28.94 735
23.19 589
55 1397
56 1422
55 1397
24 610
24.8 630
42.9 1090
24.85 630
23.9 607
42.9 1090
9350 4250
8492 3860
36x30 900x750
34.44 874
28.94 735
55 1397
56 1422
55 1397
28 710
30.6 777
50 1270
29.4 747
29.4 747
50 1270
16740 7600
14450 6560
(1) Contact our sales representative for more information.
14
TRUNNION BALL VALVE
ASME CLASS 600 (PN 100) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2 50
1.93 49
1.93 49
11.5 292
11.63 295
11.5 292
3.7 95
5.7 145
6.5 165
3.3 83
5 126
6.5 165
62 28
57 26
2 ½ 65
2.44 62
2.44 62
13 330
13.13 333
13 330
3.9 100
6.3 160
7.7 195
3.7 95
5.9 150
7.4 188
119 54
106 48
3 80
2.94 74
2.94 74
14 356
14.13 359
14 356
5 128
7.2 184
8.3 210
4.6 117
6.1 155
8.3 210
165 75
159 72
4 100
3.94 100
3.94 100
17 432
17.13 435
17 432
5.8 148
8.2 209
11.6 295
5.4 138
7 177
10.8 275
242 110
209 95
5 125
5 127
5 125
20 508
2012 511
20 508
6.7 170
8.2 208
13.4 340
6.5 165
8 202
13 330
407 185
352 160
6 150
5.94 150
5.94 150
22 559
22.13 562
22 559
7.7 195
9.8 250
14 355
7 178
9 228
14 355
551 250
511 232
8 200
7.91 201
7.91 201
26 660
26.13 663
26 660
9.6 245
11.1 283
16.5 420
9.6 245
10.5 267
16.5 420
914 415
727 330
10 250
9.92 252
9.92 252
31 787
31.13 790
31 787
11.4 290
12.6 320
20 510
11.9 302
12.3 312
20 510
1652 750
1564 710
12 300
11.94 303
11.94 303
33 838
33.13 841
33 635
14.2 360
15.3 390
22.8 580
13.8 350
14.5 368
22.6 573
2024 919
1808 820
14 350
13.19 334
13.19 334
35 889
35.12 891
35 889
15.6 395
16.1 410
25 635
15 380
15.6 396
24.8 630
2863 1300
2445 1110
16 400
15.19 385
15.19 385
39 991
39.13 994
39 991
16.7 425
17.2 436
28.3 720
17.3 440
17.5 444
16.7 423
3722 1690
33304 1500
18 450
17.19 436
17.19 435
43 1092
43.13 1095
430 1092
19.3 490
20.3 515
32.3 820
18.9 480
20 510
31.9 810
5176 2350
4670 2120
20 500
19.17 487
19.17 487
47 1194
47.25 1200
47 1194
22.6 575
22.7 576
36.2 920
20.6 522
20.7 525
34.4 875
6500 2950
6013 2730
22 550
21.19 538
21.19 538
51 1295
51.38 1305
51 1295
20.5 520
22 560
37.8 960
20.3 515
26.7 550
37.4 950
6938 3150
6432 2920
24 600
23.19 589
23.19 589
55 1397
55.38 1407
55 1397
23.8 605
25.2 640
41 1043
24.4 619
25.2 641
41.3 1050
10573 4800
9692 4400
26 650
24.94 633
24.94 633
57 1448
57.5 1461
57 1448
25.6 650
26.4 670
43.9 1115
25.5 640
26.2 665
43.3 1100
11718 5320
10683 4850
28 700
26.94 684
26.94 684
61 1549
61.5 1562
61 1594
26.8 680
23.3 720
48 1220
26.6 675
28.1 715
47.6 1210
17400 7900
16410 7450
30 750
28.94 735
28.94 735
65 1651
65.5 1664
65 1651
29.9 760
30.6 777
51.8 1315
29.1 740
30.6 776
51 1295
19600 8900
18612 8450
32 800
30.69 779
30.69 779
70 1778
70 1778
70.63 1794
31.1 790
31.5 790
55.5 1410
30.9 785
31.3 794
53.9 1370
20240 9200
18260 8300
34 850
32.69 830
32.69 830
76 1930
76.61 1946
76 1930
33.1 840
33.9 860
56.3 1480
32.7 830
33.5 850
57.5 1460
29295 13300
25300 11500
36 900
34.41 874
34.41 874
82 2083
82.63 2099
82 2083
35 890
36.6 930
60.9 1546
35.4 900
36.2 920
60.9 1548
30176 13700
27533 12500
40 1000
38.44 976
38.44 976
80.71 2050
(1) 80.71 2050
37.8 960
38 965
65.6 1665
37.4 950
37.6 955
65.2 1655
31460 14300
29172 13260
42 1050
40.19 1020
40.19 1020
82.68 2100
(1) 82.68 2100
40.9 1040
41.7 1060
72.8 1850
40.6 1030
41.3 1050
71.7 1820
36080 16400
33660 15300
48 1200
45.94 1166
45.94 1166
94.49 2400
(1) 94.49 2400
46.9 1190
46.3 1175
78.3 1990
46.5 1180
45.9 1165
77.6 1970
49940 22700
46200 21000
56 1400
53.56 1360
53.56 1360
106.3 2700
(1) 106.3 2700
54.5 1385
54.3 1380
93.5 2375
54.2 1376
53.5 1360
92.6 2352
81400 37000
30800 14000
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 600 (PN 100)
15
TRUNNION BALL VALVE
DIMENSIONS AND WEIGHTS ASME CLASS 600 (PN 100)
ASME CLASS 600 (PN 100) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2x1 ½ 50x40
1.93 49
1.5 38
11.5 292
11.62 295
11.5 292
3.7 94
5.28 134
6.5 165
3.3 83
4.5 115
6.5 165
53 24
46 21
2 ½ x2 65x50
2.44 62
1.93 49
13 330
13.13 333
13 330
3.7 95
5.7 145
7.5 190
3.3 83
5 126
7.5 190
95 43
64 29
3x2 80x50
2.94 74
1.93 49
14 356
14.13 359
14 356
3.7 95
5.7 145
8.3 210
3.3 83
5 126
8.3 210
93 42
86 39
4x3 100x80
3.94 100
2.94 74
17 432
17.13 435
17 432
5.4 138
7.2 184
10.8 275
5.5 138
6.1 155
10.8 275
187 85
150 68
6x4 150x100
5.94 150
3.94 100
22 559
22.13 562
22 559
7 178
8.2 208
14 355
7 178
7 177
14 355
330 150
187 85
8x6 200x150
7.94 201
5.94 150
26 660
26.13 663
26 660
8.3 210
9.8 250
16.5 420
8.3 210
9 228
16.5 420
638 290
528 240
10x8 250x200
9.94 252
7.94 201
31 787
31.13 790
31 787
9.6 245
11.1 283
20 510
9.6 245
10.5 267
20 510
1256 570
1167 530
12x10 300x250
11.94 303
9.94 252
33 838
33.13 841
33 838
11.4 290
12.6 320
22 560
11.9 302
12.3 312
22 560
1762 800
1608 730
14x10 350x250
13.19 334
9.94 252
35 889
35.13 892
35 889
11.4 290
12.6 320
23.8 605
11.9 302
12.3 312
23.8 605
2489 1130
2247 1020
16x12 400x300
15.19 385
11.94 303
39 991
39.13 994
39 991
14.1 360
15.4 390
27 685
13.8 350
14.5 368
27 685
3414 1550
2930 1330
18x14 450x350
17.19 436
13.19 334
43 1092
43.13 1095
43 1092
15.6 395
16.1 410
29.3 745
15.2 385
15.6 396
29.3 745
4405 2000
3965 1800
20x16 500x400
19.19 487
15.19 385
47 1194
47.25 1200
47 1194
16.7 425
17.2 436
32 815
17.3 440
17.5 444
32.1 815
5727 2600
5286 2400
24x20 600x500
23.19 589
19.19 487
55 1397
55.38 1407
55 1397
22.6 575
22.7 576
37 940
20.6 522
20.7 525
37 940
6500 3950
7819 3550
30x24 750x600
28.94 735
23.19 589
61 1651
65.5 1664
65 1651
23.8 605
25.2 640
42.9 1090
24.4 619
25.2 641
42.9 1090
18722 8500
17621 8000
36x30 900x750
34.41 874
28.94 735
82 2083
82.63 2099
82 2083
35 890
36.6 930
60.9 1546
35.4 900
36.2 920
60.9 1548
23965 10880
20925 9500
(1) Contact our sales representative for more information.
16
TRUNNION BALL VALVE
ASME CLASS 900 (PN 150) FULL BORE
Size in/mm D D1
L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2 50
1.93 49
1.93 49
14.5 368
14.63 371
14.5 368
4.3 108
5.5 140
8.5 215
4.3 108
5.5 140
8.5 215
128 58
119 54
2 ½ 65
2.44 62
2.44 62
16.5 419
16.62 422
16.5 419
4.8 123
6.3 160
9.6 245
4.8 123
6.3 160
9.6 245
152 69
139 63
3 80
2.94 74
2.94 74
15 381
15.13 384
15 381
4.7 120
6.3 161
9.4 240
4.7 120
6.3 161
9.4 240
198 90
187 85
4 100
3.94 100
3.94 100
18 457
18.13 460
18 457
5.7 145
7.1 180
11.4 290
5.7 145
7.1 180
11.4 290
295 134
253 115
5 125
4.76 121
4.76 121
22 559
22.13 562
22 559
6.7 170
8.5 215
13.8 350
6.7 170
8.5 215
13.8 350
517 235
429 195
6 150
5.94 150
5.94 150
24 610
24.13 613
24 610
7.3 185
9.4 239
15 380
7.3 185
9.4 239
15 380
661 300
617 280
8 200
7.94 201
7.94 201
29 737
29.13 740
29 737
7.7 295
11.3 288
18.5 470
7.7 295
11.3 288
18.5 470
1196 543
1123 510
10 250
9.94 252
9.94 252
33 838
33.13 841
33 838
13.8 350
13.8 350
21.5 545
13.8 350
13.8 350
21.5 545
2115 960
1872 850
12 300
11.94 303
11.94 303
38 965
38.13 968
38 965
14.6 370
15.3 388
24 610
14.6 370
15.3 388
24 610
3062 1390
2863 1300
14 350
12.69 322
12.69 322
40.5 1029
40.88 1039
40.5 1029
16.9 430
16.9 430
26.2 665
16.1 410
16.1 410
25.9 658
3414 1550
2930 1330
16 400
14.69 373
14.69 373
44.5 1130
44.88 1140
44.5 1130
17.7 450
18.1 460
29.5 750
17.7 450
18.1 460
29.5 750
4092 1860
3190 1450
18 450
16.69 423
16.69 423
48 1219
48.5 1232
48 1219
19.3 490
20.9 530
32.3 820
19.3 490
20.9 530
32.3 820
5841 2655
5220 2370
20 500
18.56 471
18.56 471
52 1321
52.5 1334
52 1321
23.2 590
22.2 565
36.5 928
23.2 590
22.2 565
36.5 928
7379 3500
6828 3100
24 600
22.44 570
22.44 570
61 1549
61.75 1568
61 1549
24.8 630
24.2 615
41.7 1060
24.8 630
24.2 615
41.7 1060
14053 6380
13436 6100
26 650
24.31 617
24.31 617
65 1651
65.88 1673 (1) 26.8
680 27.6 700
45.7 1160
26.8 680
27.6 700
45.7 1160
14850 6750
11968 5440
28 700
26.19 665
26.19 665
69 1753
69.88 1775 (1) 29.3
743 29.5 750
50.6 1285
29.3 743
29.5 750
50.6 1285
19250 8750
16390 7450
30 750
28.06 712
28.06 712
74 1880
74.88 1092 (1) 31.5
800 31.5 800
53.5 1360
31.5 800
31.5 800
53.5 1360
25300 11500
21340 9700
ASME CLASS 900 (PN 150) REDUCED BORE
Size in/mm D D1
L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2x1 ½ 50x40
1.93 49
1.5 38
14.5 215
14.62 371
14.5 368
4.3 108
4.5 115
8.5 215
4.3 108
4.5 115
8.5 215
99 45
88 40
2 ½ x2 65x50
2.44 62
1.93 49
16.5 419
16.63 422
16.5 419
4.3 108
5.1 140
9.6 245
4.3 108
5.1 140
9.6 245
128 58
115 52
3x2 80x50
2.94 74
1.93 49
15 381
15.13 384
15 381
4.3 108
5.1 140
9.4 240
4.3 108
5.1 140
9.4 240
163 74
110 50
4x3 100x80
3.94 100
2.94 74
18 457
18.13 460
18 457
5.7 145
6.3 161
11.4 290
5.7 145
6.3 161
11.4 290
264 120
220 100
6x4 150x100
5.94 150
3.94 100
24 610
24.13 613
24 610
7.5 190
7.1 180
15 380
7.5 190
7.1 180
15 380
471 214
436 198
8x6 200x150
7.94 201
5.94 150
29 737
29.13 740
29 737
9.3 235
9.4 239
18.5 470
9.3 235
9.4 239
18.5 470
817 371
771 350
10x8 250x200
9.94 252
7.94 201
33 838
33.13 841
33 838
11.3 295
11.3 288
21.5 545
11.3 295
11.3 288
21.5 545
1542 700
1366 620
12x10 300x250
11.94 303
9.94 252
38 965
38.13 968
38 965
13 330
13.8 350
24 610
13 330
13.8 350
24 610
2643 1200
1936 880
14x10 350x250
14.69 322
11.94 303
44.5 1130
44.88 1140
44.5 1130
14.6 370
15.3 388
24 610
14.6 370
15.3 388
24 610
2974 1350
2467 1120
16x12 400x300
14.69 373
11.94 303
44.5 1130
44.88 1140
44.5 1130
14.6 370
15.6 388
24 610
14.6 370
15.6 388
24 610
3855 1750
3729 1720
18x14 450x350
16.69 423
12.69 322
48 1219
48.5 1232
48 1219
16.9 430
16.9 430
30.9 785
16.1 410
16.1 410
30.9 785
5286 2400
4956 2250
20x16 500x400
18.56 471
14.69 373
52 1321
52.5 1334
52 1321
17.7 450
18.1 460
33.7 855
17.7 450
18.1 460
33.7 855
6993 3175
6388 2900
24x20 600x500
22.44 570
18.56 471
61 1549
61.75 1568
61 1549
23.2 590
22.2 565
40.9 1040
23.2 590
22.2 565
40.9 1040
11650 5289
10793 4900
30x24 750x600
28.06 712
22.44 570
74 1880
74.88 1902
(1) 24.8 630
24.2 615
48.4 1230
24.8 630
24.2 615
48.4 1230
(1) (1)
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 900 (PN 150)
17
TRUNNION BALL VALVE
ASME CLASS 1500 (PN 250) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2 50
1.93 49
1.93 49
14.5 368
14.63 371
14.5 368
4.3 108
5.5 140
8.5 215
4.3 108
5.5 140
8.5 215
128 58
97 44
2 ½ 65
2.44 62
2.44 62
16.5 419
16.62 422
16.5 419
4.8 123
6.3 160
9.6 245
4.8 123
6.3 160
9.6 245
176 80
165 75
3 80
2.94 74
2.94 74
18.5 470
18.63 473
18.5 470
5.5 140
7.4 187
10.4 265
5.5 140
7.4 187
10.4 265
333 151
274 135
4 100
3.94 100
3.94 100
21.5 546
21.63 549
21.5 546
6.5 165
7.9 201
12.2 310
6.5 165
7.9 201
12.2 310
441 200
414 188
5 125
4.37 111
4.37 111
26.5 673
27.04 676
26.5 673
6.9 175
8.7 220
14.8 375
6.9 175
8.7 220
14.8 375
847 385
642 292
6 150
5.69 144
5.69 144
27.75 705
28 711
27.75 705
9.6 219
11.3 288
16.3 415
9.6 219
11.3 288
16.3 415
1123 510
1057 480
8 200
7.56 192
7.56 191
32.75 832
33.13 842
32.75 832
11.6 295
12.8 325
19.1 485
11.6 295
12.8 325
19.1 485
1804 819
1608 730
10 250
9.44 239
9.44 239
39 991
39.38 1001
39 991
14.2 360
15.9 405
23.6 600
14.2 360
15.9 405
23.6 600
3282 1490
2753 1250
12 300
11.31 287
11.31 287
44.5 1130
45.13 1146
44.5 1130
15.7 400
17 432
27.2 692
15.7 400
17 432
27.2 692
4626 2100
4295 1950
14 350
12.44 315
12.44 315
49.5 1259
50.25 1276
49.5 1257
19.3 490
18.9 480
30.7 780
18.7 475
18.5 469
30.1 765
6454 2930
6057 2750
16 400
14.19 360
14.19 360
54.5 1384
55.38 1407
54.5 1384
24.8 629
23.5 598
38.6 980
24.8 629
23.5 598
38.6 980
8194 3720
7709 3500
18 450
16 406
16 406
60.5 1537
61.38 1559
(1) 24 610
24.4 620
39.4 1000
24 610
24.4 620
39.4 1000
12775 5800
11013 5100
20 500
17.88 454
17.88 454
65.5 1664
66.38 1686
(1) 25.6 650
25.6 650
41.9 1065
25.6 650
25.6 650
41.9 1065
19383 8800
17621 8000
24 600
21.5 546
21.5 546
76.5 1943
77.63 1972
(1) 29.9 760
31.4 798
50.2 1275
29.9 760
31.4 798
50.2 1275
28634 13000
26432 12000
ASME CLASS 1500 (PN 250) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2x1 ½ 50x40
1.93 49
1.5 38
14.5 368
14.62 371
14.5 368
4.3 108
4.5 115
8.5 215
4.3 108
4.5 115
8.5 215
95 43
75 34
2 ½ x2 65x50
2.44 62
1.93 49
16.5 419
16.63 422
16.5 419
4.3 108
5.5 140
9.6 245
4.3 108
5.5 140
9.6 245
150 68
139 63
3x2 80x50
2.94 74
1.93 49
18.5 470
18.63 473
18.5 470
4.3 108
5.5 140
10.6 265
4.3 108
5.5 140
10.6 265
189 86
167 76
4x3 100x80
3.94 100
2.94 74
21.5 546
21.63 549
21.5 546
6.1 155
7.4 187
12.2 310
6.1 155
7.4 187
12.2 310
414 188
388 176
6x4 150x100
5.69 144
3.94 100
27.75 705
28 711
27.75 705
7.8 198
7.9 201
15.6 395
7.8 198
7.9 201
15.6 395
678 308
645 293
8x6 200x150
7.56 192
5.69 144
32.75 832
33.13 841
32.75 832
9.6 243
11.3 288
19.1 485
9.6 243
11.3 288
19.1 485
1575 715
1476 670
10x8 250x200
9.44 239
7.56 192
39 991
39.38 1001
39 991
11.6 295
12.8 325
23 585
11.6 295
12.8 325
23 585
2698 1225
2533 1150
12x10 300x250
11.31 287
9.44 239
44.5 1130
45.13 1146
44.5 1130
14.2 360
15.9 405
26.6 675
14.2 360
15.9 405
26.6 675
4031 1830
3634 1650
14x10 350x250
12.44 315
9.44 239
49.5 1257
50.25 1276
49.5 1257
14.2 360
15.9 405
29.5 750
14.2 360
15.9 405
29.5 750
5595 2540
4846 2200
16x12 400x300
14.19 360
11.31 287
54.5 1384
55.38 1407
54.5 1384
15.7 400
17 432
32.5 825
15.7 400
17 432
32.5 825
7390 3355
6608 3000
18x14 450x350
16 406
12.44 315
60.5 1537
61.38 1559
60.5 1537
18.7 475
18.5 469
36 915
18.7 475
18.5 469
36 915
10474 4755
8811 4000
20x16 500x400
17.88 454
14.19 360
65.5 1664
66.38 1686
(1) 24.8 629
23.5 598
38.8 985
24.8 629
23.5 598
38.8 985
16079 7300
14978 6800
24x20 600x500
21.5 546
17.88 454
76.5 1943
77.63 1971
76.5 1943
25.6 650
25.6 650
46.1 1170
25.6 650
25.6 650
46.1 1170
20220 9180
17621 8000
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 1500 (PN 250)
18
TRUNNION BALL VALVE
ASME CLASS 2500 (PN 420) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2 50
1.69 42
1.69 42
17.75 451
17.88 454
17.75 451
/ / / 5.5 139
7.2 183
9.3 235
348 158
308 140
2 ½ 65
2.06 52
2.06 52
20.32 508
20.56 514
20.32 508
/ / / 5.2 133
6.8 173
10.4 265
378 172
341 155
3 80
2.44 62
2.44 62
22.75 578
23 584
22.75 578
/ / / 6.3 !60
8.1 205
12 305
529 240
474 215
4 100
3.44 87
3.44 87
26.5 673
26.88 683
26.5 673
/ / / 7.4 188
6.8 173
14 355
969 440
881 400
5 125
3.62 92
3.62 92
31.26 794
31.77 807
31.26 794
/ / / 7.1 180
10 255
16.5 420
1652 750
1586 720
6 150
5.19 131
5.19 131
36 914
36.5 927
36 914
/ / / 10.8 275
13.4 341
19.1 485
2115 960
1982 900
8 200
7.06 179
7.06 179
40.25 1022
40.88 1038
40.25 1022
/ / / 15 380
16.5 418
24.2 615
2885 1310
2643 1200
10 250
8.81 223
8.81 223
50 1270
50.88 1292
50 1270
/ / / 18.9 480
20.5 520
31.9 810
4626 2110
4295 1950
12 300
10.44 265
10.44 265
56 1422
56.88 1444
56 1422
/ / / 19.7 500
21.3 540
33.9 860
7115 3230
6608 3000
ASME CLASS 2500 (PN 420) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B C A B C RF/RTJ (lb/kg)
BW (lb/kg)
2x1 ½ 50x40
1.69 42
1.5 38
17.75 368
17.88 454
17.75 451
/ / / 4.6 118
5.5 140
9.3 235
275 125
231 105
2 ½ x2 65x50
2.06 52
1.69 42
20 508
20.25 514
20 508
/ / / 5.5 139
7.2 183
10.4 265
330 150
297 135
3x2 80x50
2.44 62
1.69 42
22.75 578
23 584
22.75 578
/ / / 5.5 139
7.2 183
12 305
430 195
396 180
4x3 100x80
3.44 87
2.66 62
26.5 673
26.88 683
26.5 673
/ / / 7 178
10.4 265
14 355
859 390
771 350
6x4 150x100
5.19 131
3.44 87
36 914
36.5 927
36 914
/ / / 9.6 243
10.7 273
19.1 485
1432 650
1322 600
8x6 200x150
7.06 179
5.19 131
40.25 1022
40.88 1038
40.25 1022
/ / / 10.8 275
13.4 341
21.7 550
2500 1135
2203 1000
10x8 250x200
8.81 223
7.06 179
50 1270
50.88 1292
50 1270
/ / / 15 380
16.5 418
26.6 675
3778 1715
3304 1500
12x10 300x250
10.44 265
8.81 223
56 1422
56.88 1445
56 1422
/ / / 18.9 480
20.5 520
31.9 810
5881 2670
5286 2400
(1) Contact our sales representative for more information.
DIMENSIONS AND WEIGHTS ASME CLASS 2500 (PN 420)
19
TRUNNION BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE NPS 2-4 (DN 50-100)
Note: (1) Torque doesn’t include safety factor. The torque is based on seats of PTFE/RPTFE (Class 150 – 300), Nylon (Class 900 – 1500), and PEEK (Class 2500). Torque shall beas follows if other than the base seat material is selected:
PTFE/RPTFE Nylon Devlon PCTFE TFM Delrin Molon PPL PEEK Metal
Base x 1 x 1 x 0.8 X 0.8 x 1 X 1 X 0.8 x 1.3 x 2.2
(2) Number of bolt holes and bolt hole diameter.
Size in/mm
Rating Class/PN
Torque(1)
ft-lb/N-m ISO F#
A B C D h E n-Φd(2) H Drive Key axb
f Gearbox Model
2 50
150 20
44 60
F10 4.92 125
4.02 102
2.76 70
0.945 24
0.118 3
0.63 16
4-Φ0.472 4-Φ12
1.575 40
0.315 x 0.276 8x7
1.063 27
GE-A1
300 50
81 110
F10 4.92 125
4.02 102
2.76 70
0.945 24
0.118 3
0.63 16
4-Φ0.472 4-Φ12
1.575 40
0.315 x 0.276 8x7
1.063 27
GE-A1
600
100
111
150 F10
4.92
125
4.02
102
2.76
70
0.945
24
0.118
3
0.63
16
4-Φ0.472
4-Φ12
1.575
40
0.315 x 0.276
8x7
1.063
27 GE-A1
900
150
133
180 F12
5.91
150
4.92
125
3.35
85
1.102
28
0.118
3
0.83
21
4-Φ0.551
4-Φ14
1.772
45
0.315 x 0.276
8x7
1.063
27 GE-A2
1500 250
148 200
F12 5.91 150
4.92 125
3.35 85
1.102 28
0.118 3
0.83 21
4-Φ0.551 4-Φ14
1.772 45
0.315 x 0.276 8x7
1.063 27
GE-A2
2500 420
295 400
F16 8.27 210
6.5 165
5.12 130
1.417 36
0.118 3
1.10 28
4-Φ0.866 4-Φ22
2.362 60
0.394 x 0.315 10x8
1.339 34
GE-A4
2 ½ 65
150 20
59 80
F10 4.92 125
4.02 102
2.76 70
0.945 24
30.118 3
0.63 16
4-Φ0.472 4-Φ12
1.575 40
0.315 x 0.276 8 x 7
1.063 27
GE-A1
300 50
96 130
F10 4.92 125
4.02 102
2.76 70
0.945 24
30.118 3
0.63 16
4-Φ0.472 4-Φ12
1.575 40
0.315 x 0.276 8x7
1.063 27
GE-A1
600
100
133
180 F12
5.91
150
4.92
125
3.35
85
1.102
28
0.118
3
0.83
21
4-Φ0.551
4-Φ14
1.772
45
0.315 x 0.276
8x7
1.063
27 GE-A2
900
150
177
240 F12
5.91
150
4.92
125
3.35
85
1.102
28
0.118
3
0.83
21
4-Φ0.551
4-Φ14
1.772
45
0.315 x 0.276
8x7
1.063
27 GE-A2
1500 250
221 300
F14 6.89 175
5.51 140
3.94 100
1.417 36
0.157 4
0.98 25
4-Φ0.709 4-Φ18
2.362 60
0.394 x 0.315 10 x 8
1.339 34
GE-A3
2500 420
354 480
F16 8.27 210
6.5 165
5.12 130
1.575 40
0.197 5
1.18 30
4-Φ0.866 4-Φ22
2.362 60
0.472 x 0.315 12x8
1.693 43
GE-A4
3 80
150 20
74 100
F10 4.92 125
4.02 102
2.76 70
0.945 24
0.118 3
0.87 22
4-Φ0.472 4-Φ12
1.575 40
0.315 x 0.276 8x7
1.063 27
GE-A1
300 50
96 130
F10 4.92 125
4.02 102
2.76 70
0.945 24
0.118 3
0.87 22
4-Φ0.472 4-Φ12
1.575 40
0.315 x 0.276 8x7
1.063 27
GE-A1
600
100
148
200 F12
5.91
150
4.92
125
3.35
85
1.102
28
0.118
3
0.91
23
4-Φ0.551
4-Φ14
1.772
45
0.315 x 0.276
8 x 7
1.063
27 GE-A2
900
150
207
280 F14
6.89
175
5.51
140
3.94
100
1.417
36
0.157
4
0.98
25
4-Φ0.709
4-Φ18
2.362
60
0.394 x 0.315
10x8
1.339
34 GE-A3
1500 250
354 480
F14 6.89 175
5.51 140
3.94 100
1.575 40
0.157 4
1.14 29
4-Φ0.709 4-Φ18
2.362 60
0.472 x 0.315 12x8
1.693 43
GE-A3
2500 420
443 600
F16 8.27 210
6.5 165
5.12 130
1.772 45
0.197 5
1.18 30
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
1.949 49.5
GE-A4
4 100
150 20
89 120
F12 5.91 150
4.92 125
3.35 85
1.102 28
0.118 3
0.91 23
4-Φ0.551 4-Φ14
1.772 45
0.315 x 0.276 8x7
1.063 27
GE-A2
300 50
133 180
F12 5.91 150
4.92 125
3.35 85
1.102 28
0.118 3
0.91 23
4-Φ0.551 4-Φ14
1.772 45
0.315 x 0.276 8x7
1.063 27
GE-A2
600
100
207
280 F14
6.89
175
5.51
140
3.94
100
1.417
36
0.157
4
0.98
25
4-Φ0.709
4-Φ18
2.362
60
0.394 x 0.315
10x8
1.339
34 GE-A3
900
150
369
500 F14
6.89
175
5.51
140
3.94
100
1.417
36
0.157
4
0.98
25
4-Φ0.709
4-Φ18
2.362
60
0.394 x 0.315
10x8
1.339
34 GE-A3
1500 250
590 800
F16 8.27 210
6.5 165
5.12 130
1.772 45
0.197 5
1.18 30
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
1.949 49.5
GE-A4
2500 420
1475 2000
F16 8.27 210
6.5 165
5.12 130
1.969 50
0.197 5
1.18 30
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
2.244 57
GE-A5
20
TRUNNION BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE (CONT’D) NPS 6-10 (DN 150-300)
Note: (1) Torque doesn’t include safety factor. The torque is based on seats of PTFE/RPTFE (Class 150 – 300), Nylon (Class 900 – 1500), and PEEK (Class 2500). Torque shall be as follows if other than the base seat material is selected:
PTFE/RPTFE Nylon Devlon PCTFE TFM Delrin Molon PPL PEEK Metal
Base x 1 x 1 x 0.8 X 0.8 x 1 X 1 X 0.8 x 1.3 x 2.2
(2) Number of bolt holes and bolt hole diameter.
Size in/mm
Rating Class/PN
Torque(1)
ft-Lb/N-m ISO F#
A B C D h E n-Φd(2) H Drive Key a x b
f Gearbox Model
6 150
150 20
369 500
F16 8.27 210
6.5 165
5.12 130
1.417 36
0.197 5
0.984 25
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.315 10 x 8
1.339 34
GE-A3
300 50
516 700
F16 8.27 210
6.5 165
5.12 130
1.417 36
0.197 5
0.984 25
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.315 10 x 8
1.339 34
GE-A3
600
100
811
1100 F16
8.27
210
6.5
165
5.12
130
1.772
45
0.197
5
1.181
30
4-Φ0.866
4-Φ22
2.756
70
0.551 x 0.354
14 x 9
1.949
49.5 GE-A4
900
150
1549
2100 F16
8.27
210
6.5
165
5.12
130
1.969
50
0.197
5
1.181
30
4-Φ0.866
4-Φ22
2.756
70
0.551 x 0.354
14 x 9
2.244
57 GE-A5
1500 250
2213 3000
F16 8.27 210
6.5 165
5.12 130
2.165 55
0.197 5
1.181 30
4-Φ0.866 4-Φ22
3.15 80
0.63 x 0.394 16 x 10
2.48 63
GE-A6
2500 420
3688 5000
F25 11.81 300
10 254
7.87 200
2.559 65
0.197 5
1.378 35
4-Φ0.709 4-Φ18
3.543 90
0.709 x 0.433 18 x 11
2.874 73
GE-A9
8 200
150 20
443 600
F16 8.27 210
6.5 165
5.12 130
1.772 45
0.197 5
1.181 30
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
1.949 49.5
GE-A4
300 50
811 1100
F16 8.27 210
6.5 165
5.12 130
1.772 45
0.197 5
1.181 30
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
1.949 49.5
GE-A4
600
100
1401
1900 F16
8.27
210
6.5
165
5.12
130
1.969
50
0.197
5
1.181
30
4-Φ0.866
4-Φ22
2.756
70
0.551 x 0.354
14 x 9
2.244
57 GE-A6
900
150
2581
3500 F25
11.81
300
10
254
7.87
200
2.165
55
0.197
5
1.181
30
8-Φ0.709
8-Φ18
3.15
80
0.63 x 0.394
16 x 10
2.48
63 GE-A8
1500 250
4794 6500
F25 11.81 300
10 254
7.87 200
2.756 70
0.197 5
1.496 38
8-Φ0.709 8-Φ18
3.937 100
0.787 x 0.472 20 x 12
3.11 79
GE-B1
2500 420
6269 8500
F30 13.78 350
11.73 298
9.06 230
3.543 90
0.197 5
1.496 38
8-Φ0.866 8-Φ22
4.724 120
0.984 x 0.551 25 x 14
3.937 100
GE-B2
10 250
150 20
738 1000
F16 8.27 210
6.5 165
5.12 130
1.969 50
0.197 5
1.063 27
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
2.244 57
GE-A5
300 50
1475 2000
F16 8.27 210
6.5 165
5.12 130
1.969 50
0.197 5
1.063 27
4-Φ0.866 4-Φ22
2.756 70
0.551 x 0.354 14 x 9
2.244 57
GE-A5
600
100
2581
3500 F25
11.81
300
10
254
7.87
200
2.559
65
0.197
5
1.260
32
8-Φ0.709
8-Φ18
3.543
90
0.709 x 0.433
18 x 11
2.874
73 GE-A8
900
150
4057
5500 F25
11.81
300
10
254
7.87
200
2.756
70
0.197
5
1.417
36
8-Φ0.709
8-Φ18
3.937
100
0.787 x 0.472
20 x 12
3.11
79 GE-A9
1500 250
7744 10500
F30 13.78 350
11.73 298
9.06 230
3.543 90
0.197 5
1.496 38
8-Φ0.866 8-Φ22
4.724 120
0.984 x 0.551 25 x 14
3.937 100
GE-B3
2500 420
16226 22000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28 x 16
4.409 112
GE-B5
12 300
150 20
1106 1500
F25 11.81 300
10 254
7.87 200
2.362 60
0.197 5
1.378 35
8-Φ0.709 8-Φ18
3.15 80
0.709 x 0.433 18 x 11
2.677 68
GE-A7
300 50
2065 2800
F25 11.81 300
10 254
7.87 200
2.362 60
0.197 5
1.378 35
8-Φ0.709 8-Φ18
3.15 80
0.709 x 0.433 18 x 11
2.677 68
GE-A8
600
100
4057
5500 F25
11.81
300
10
254
7.87
200
2.756
70
0.197
5
1.378
35
8-Φ0.709
8-Φ18
3.937
100
0.787 x 0.472
20 x 12
3.11
79 GE-A9
900
150
6491
8800 F30
13.78
350
11.73
298
9.06
230
3.543
90
0.197
5
1.496
38
8-Φ0.866
8-Φ22
4.724
120
0.984 x 0.551
25 x 14
3.937
100 GE-B2
1500 250
11801 16000
F35 16.34 415
10.24 260
14.02 356
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28 x 16
4.409 112
GE-B4
2500 420
18070 24500
F35 16.34 415
10.24 260
1402 356
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28 x 16
4.409 112
GE-C3
21
TRUNNION BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE (CONT’D) NPS 14-24 (DN 350-600)
Note: (1) Torque doesn’t include safety factor. The torque is based on seats of PTFE/RPTFE (Class 150 – 300), Nylon (Class 900 – 1500), and PEEK (Class 2500). Torque shall be as follows if other than the base seat material is selected:
PTFE/RPTFE Nylon Devlon PCTFE TFM Delrin Molon PPL PEEK Metal
Base x 1 x 1 x 0.8 X 0.8 x 1 X 1 X 0.8 x 1.3 x 2.2
(2) Number of bolt holes and bolt hole diameter.
Size in/mm
Rating Class/PN
Torque(1)
ft-lb/N-m ISO F#
A B C D h E n-Φd(2) H Drive Key a x b
f Gearbox Model
14 350
150 20
1328 1800
F25 11.81 300
10 254
7.87 200
2.559 65
0.197 5
1.299 33
8-Φ0.709 8-Φ18
3.543 90
0.709 x 0.433 18x11
2.874 73
GE-A7
300 50
2655 3600
F25 11.81 300
10 254
7.87 200
2.559 65
0.197 5
1.299 33
8-Φ0.709 8-Φ18
3.543 90
0.709 x 0.433 18x11
2.874 73
GE-A9
600 100
5163 7000
F25 11.81 300
10 254
7.87 200
3.15 80
0.197 5
1.378 35
8-Φ0.709 8-Φ18
4.724 120
0.866 x 0.551 22x14
3.543 90
GE-B1
900
150
8998
12200 F30
13.78
350
11.73
298
9.06
230
3.937
100
0.197
5
1.378
35
8-Φ0.866
8-Φ22
5.512
140
1.102 x 0.63
28x16
4.409
112 GE-B3
1500
250
13276
18000 F35
16.34
415
14.02
356
10.24
260
3.937
100
0.197
5
1.575
40
8-Φ1.299
8-Φ33
5.512
140
1.102 x 0.63
28x16
4.409
112 GE-B5
16 400
150 20
2508 3400
F25 11.81 300
10 254
7.78 200
3.15 80
0.197 5
1.378 35
8-Φ0.709 8-Φ18
4.724 120
0.866 x 0.551 22x14
3.543 90
GE-A8
300 50
4720 6400
F25 11.81 300
10 254
7.78 200
3.15 80
0.197 5
1.378 35
8-Φ0.709 8-Φ18
4.724 120
0.866 x 0.551 22x14
3.543 90
GE-A9
600 100
8113 11000
F30 13.78 350
11.73 298
9.06 230
3.937 100
0.197 5
1.378 35
8-Φ0.866 8-Φ22
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B3
900 150
11432 15500
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B4
1500
250
18439
25000 F40
18.7
475
15.98
406
11.81
300
34.724
120
0.315
8
1.772
45
8-Φ1.535
8-Φ39
6.299
160
1.26 x 0.709
32x18
5.276
134 GE-C5
18 450
150
20
2950
4000 F25
11.81
300
10
254
7.87
200
3.15
80
0.197
5
1.378
35
8-Φ0.709
8-Φ18
4.724
120
0.866 x 0.551
22x14
3.543
90 GE-A9
300 50
5532 7500
F25 11.81 300
10 254
7.87 200
3.15 80
0.197 5
1.378 35
8-Φ0.709 8-Φ18
4.724 120
0.866 x 0.551 22x14
3.543 90
GE-A9
600 100
11063 15000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B4
900 150
16226 22000
F35 16.34 415
14.02 356
10.24 260
4.724 120
0.197 5
1.575 40
8-Φ1.299 8-Φ33
6.299 160
1.26 x 0.709 32x18
5.276 134
GE-B5
1500 250
26552 36000
F40 18.7 475
15.98 406
11.81 300
5.512 140
0.315 8
1.772 45
8-Φ1.535 8-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B6
20 500
150
20
3319
4500 F30
13.78
350
11.73
298
9.06
230
3.543
90
0.197
5
1.496
38
8-Φ0.866
8-Φ22
4.724
120
0.984 x 0.551
25x14
3.937
100 GE-B2
300
50
7007
9500 F30
13.78
350
11.73
298
9.06
230
3.543
90
0.197
5
1.496
38
8-Φ0.866
8-Φ22
4.724
120
0.984 x 0.551
25x14
3.937
100 GE-B3
600 100
14014 19000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B5
900 150
22864 31000
F40 18.7 475
15.98 406
11.81 300
4.724 120
0.315 8
1.772 45
8-Φ1.535 8-Φ39
6.299 160
1.26 x 0.709 32x18
5.276 134
GE-B6
1500 250
35624 48300
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.772 45
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B7
24
600
150 20
5900 8000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B4
300
50
12907
17500 F35
16.34
415
14.02
356
10.24
260
3.937
100
0.197
5
1.575
40
8-Φ1.299
8-Φ33
5.512
140
1.102 x 0.63
28x16
4.409
112 GE-B4
600
100
23602
32000 F40
18.7
475
15.98
406
11.81
300
4.724
120
0.315
8
1.772
45
8-Φ1.535
8-Φ39
6.299
160
1.26 x 0.709
32x18
5.276
134 GE-B6
900 150
36878 50000
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.772 45
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B7
1500 250
66380 90000
F60 27.01 686
23.74 603
18.5 470
6.299 160
0.315 8
2.362 60
20-Φ1.535 20-Φ39
7.48 190
1.575 x 0.866 40x22
7.008 178
GE-C7
22
TRUNNION BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE (CONT’D) NPS 26-40 (DN 650-1000)
Note: (1) Torque doesn’t include safety factor. The torque is based on seats of PTFE/RPTFE (Class 150 – 300), Nylon (Class 900 – 1500), and PEEK (Class 2500). Torque shall be as follows if other than the base seat material is selected:
PTFE/RPTFE Nylon Devlon PCTFE TFM Delrin Molon PPL PEEK Metal
Base x 1 x 1 x 0.8 X 0.8 x 1 X 1 X 0.8 x 1.3 x 2.2
(2) Number of bolt holes and bolt hole diameter.
Size in/mm
Rating Class/PN
Torque(1)
ft-lb/N-m ISO F#
A B C D h E n-Φd(2) H Drive Key a x b
f Gearbox Model
26 650
150 20
6269 8500
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B4
300 50
13276 18000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B5
600
100
25077
34000 F40
18.7
475
15.98
406
11.81
300
4.724
120
0.315
8
1.772
45
8-Φ1.535
8-Φ39
6.299
160
1.26 x 0.709
32x18
5.276
134 GE-B6
900
150
42041
57000 F48
22.05
560
19.02
483
14.57
370
5.512
140
0.315
8
1.772
45
12-Φ1.535
12-Φ39
6.693
170
1.417 x 0.787
36x20
6.142
156 GE-B7
28
700
150 20
6638 9000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B4
300 50
16226 22000
F35 16.34 415
14.02 356
10.24 260
3.937 100
0.197 5
1.575 40
8-Φ1.299 8-Φ33
5.512 140
1.102 x 0.63 28x16
4.409 112
GE-B5
600 100
30978 42000
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.772 45
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B7
900 150
46465 63000
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.772 45
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B7
30 750
150
20
8851
12000 F35
16.34
415
14.02
356
10.24
260
3.937
100
0.197
5
1.575
40
8-Φ1.299
8-Φ33
5.512
140
1.102 x 0.63
28x16
4.409
112 GE-B4
300
50
19914
27000 F40
18.7
475
15.98
406
11.81
300
4.724
120
0.315
8
1.772
45
8-Φ1.535
8-Φ39
6.299
160
1.26 x 0.709
32x18
5.276
134 GE-B6
600 100
37616 51000
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.772 45
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-C5
900 150
55317 75000
F48 22.05 560
19.02 483
14.57 370
6.299 160
0.315 8
1.969 50
12-Φ1.535 12-Φ39
7.48 190
1.575 x 0.866 40x22
7.008 178
GE-B7
32 800
150 20
9957 13500
F35 16.34 415
14.02 356
10.24 260
4.724 120
0.197 5
1.575 40
8-Φ1.299 8-Φ33
6.299 160
1.26 x 0.709 32x18
5.276 134
GE-B5
300 50
22864 31000
F40 18.7 475
15.98 406
11.81 300
4.724 120
0.315 8
1.772 45
8-Φ1.535 8-Φ39
6.299 160
1.26 x 0.709 32x18
5.276 134
GE-B6
600
100
44254
60000 F48
22.05
560
19.02
483
14.57
370
5.512
140
0.315
8
1.772
45
12-Φ1.535
12-Φ39
6.693
170
1.417 x 0.787
36x20
6.142
156 GE-C5
34 850
150
20
11432
15500 F35
16.34
415
14.02
356
10.24
260
4.724
120
0.197
5
1.575
40
8-Φ1.299
8-Φ33
6.299
160
1.26 x 0.709
32x18
5.276
134 GE-B5
300 50
26921 36500
F40 18.7 475
15.98 406
11.81 300
5.512 140
0.315 8
1.772 45
8-Φ1.535 8-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B6
600 100
51629 70000
F48 22.05 560
19.02 483
14.57 370
6.299 160
0.315 8
1.969 50
12-Φ1.535 12-Φ39
7.48 190
1.575 x 0.866 40x22
7.008 178
GE-B7
36 900
150 20
12539 17000
F35 16.34 415
14.02 356
10.24 260
4.724 120
0.197 5
1.575 40
8-Φ1.299 8-Φ33
6.299 160
1.26 x 0.709 32x18
5.276 134
GE-B5
300 50
28765 39000
F40 18.7 475
15.98 406
11.81 300
5.512 140
0.315 8
1.772 45
8-Φ1.535 8-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B6
600
100
56055
76000 F48
22.05
560
19.02
483
14.57
370
6.299
160
0.315
8
1.969
50
12-Φ1.535
12-Φ39
7.48
190
1.575 x 0.866
40x22
7.008
178 GE-B7
40 1000
150
20
18439
25000 F40
18.7
475
15.98
406
11.81
300
7.724
120
0.315
8
1.772
45
8-Φ1.535
8-Φ39
6.299
160
1.26 x 0.709
32x18
5.276
134 GE-B6
300 50
36878 50000
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.969 50
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-C5
600 100
66380 90000
F60 27.01 686
23.74 603
18.5 470
6.299 160
0.315 8
2.362 60
20-Φ1.535 20-Φ39
7.48 190
1.575 x 0.866 40x22
7.008 178
GE-C7
23
TRUNNION BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE (CONT’D) NPS 42-56 (DN 1050-1400)
Note: (1) Torque doesn’t include safety factor. The torque is based on seats of PTFE/RPTFE (Class 150 – 300), Nylon (Class 900 – 1500), and PEEK (Class 2500). Torque shall be as follows if other than the base seat material is selected:
PTFE/RPTFE Nylon Devlon PCTFE TFM Delrin Molon PPL PEEK Metal
Base x 1 x 1 x 0.8 X 0.8 x 1 X 1 X 0.8 x 1.3 x 2.2
(2) Number of bolt holes and bolt hole diameter. (3) Please consult our sales representative for gearbox selection.
Size in/mm
Rating Class/PN
Torque(1)
ft-lb/N-m ISO F#
A B C D h E n-Φd(2) H Drive Key a x b
f Gearbox Model
42 1050
150 20
20652 28000
F40 18.7 475
15.98 406
11.81 300
4.724 120
0.315 8
1.772 45
8-Φ1.535 8-Φ39
6.299 160
1.26 x 0.709 32x18
5.276 134
GE-B6
300 50
40566 55000
F48 22.05 560
19.02 483
14.57 370
5.512 140
0.315 8
1.969 50
12-Φ1.535 12-Φ39
6.693 170
1.417 x 0.787 36x20
6.142 156
GE-B7
600
100
81132
110000 F60
27.01
686
23.74
603
18.5
470
6.299
160
0.315
8
2.362
60
20-Φ1.535
20-Φ39
7.48
190
1.575 x 0.866
40x22
7.008
178 GE-C7
48 1200
150
20
33190
45000 F40
18.7
475
15.98
406
11.81
300
5.512
140
0.315
8
1.772
45
8-Φ1.535
8-Φ39
6.693
170
1.417 x 0.787
36x20
6.142
156 GE-C5
300 50
66380 90000
F60 27.01 686
23.74 603
18.5 470
6.299 160
0.315 8
2.362 60
20-Φ1.535 20-Φ39
7.48 190
1.575 x 0.866 40x22
7.008 178
GE-C7
600 100
125385 170000
F60 27.01 686
23.74 603
18.5 470
7.874 200
0.315 8
2.362 60
20-Φ1.535 20-Φ39
9.25 235
1.772 x 0.984 45x25
8.661 220
(3)
56 1400
150 20
40566 55000
F48 22.05 560
19.02 483
14.57 370
6.299 160
0.315 8
1.969 50
12-Φ1.535 12-Φ39
7.48 190
1.575 x 0.866 40x22
7.008 178
GE-B7
300 50
92195 125000
F60 27.01 686
23.74 603
18.5 470
7.087 180
0.315 8
2.165 55
20-Φ1.535 20-Φ39
8.661 220
1.772 x 0.984 45x25
7.874 200
GE-C7
600
100
177014
240000 F60
27.01
686
23.74
603
18.5
470
7.874
200
0.315
8
2.362
60
20-Φ1.535
20-Φ39
9.252
235
1.772 x 0.984
45x25
8.661
220 (3)
24
TRUNNION BALL VALVE
GEAR OPERATORS DIMENSIONS AND WEIGHTS
Gearbox Model
ISO F# A B C D E W Gear Ratio Weight lb/kg
Input Torque ft-lb/N-m
Output Torque ft-lb/N-m
GE-A1 F10 2.5 63
8.4 214
2.4 60
1.3 33
2.8 72
13.8 350
38:1 18 8
59 80
406 550
GE-A2 F12 3 75
8.8 223
3 75
1.6 40
3.4 87
13.8 350
54:1 24 11
66 90
701 950
GE-A3 F14 3.4 87
9.3 236
3.5 90
2.1 54
4.2 106
13.8 350
50:1 33 15
92 125
959 1300
GE-A4 F16 4.1 105
9.3 236
3.5 90
2.1 54
4.2 106
13.8 350
50:1 37 17
92 125
959 1300
GE-A5 F16 4.1 105
12.2 310
3.5 90
2.1 54
4.2 106
18.1 460
72:1 55 25
122 165
1623 2200
GE-A6 F16 4.1 105
14.8 375
3.7 95
2.1 54
4.4 112
23.6 600
68:1 88 40
144 195
2360 3200
GE-A7 F25 5.9 150
14.8 375
3.7 95
2.1 54
4.4 112
23.6 600
68:1 106 48
144 195
2360 3200
GE-A8 F25 5.9 150
16.9 430
5.3 135
7.1 180
6 153
23.6 600
85:1 179 81
144 195
3098 4200
GE-A9 F25 5.9 150
20.1 510
5.3 135
7.1 180
6 153
23.6 600
200:1 198 90
144 195
5310 7200
GE-B1 F25 6.1 155
20.9 532
5.5 140
3 77
6.5 166
23.6 600
275:1 229 104
144 195
7449 10100
GE-B2 F30 6.1 155
20.9 532
5.5 140
3 77
6.5 166
23.6 600
275:1 229 104
144 195
7449 10100
GE-B3 F30 6.8 172
21.9 557
5.7 145
2.9 74
6.6 168
23.6 600
433:1 278 126
144 195
10695 14500
GE-B4 F35 8.1 207
22.8 579
6.5 165
3.3 84
7.5 190
23.6 600
518:1 348 158
144 195
13719 18600
GE-B5 F35 8.3 212
25.2 641
6.5 165
3.4 87
7.2 183
23.6 600
664:1 459 208
144 195
18070 24500
GE-B6 F40 10.4 265
29.3 744
8.1 205
4.3 109
8.9 225
23.6 600
1281:1 725 329
144 195
31346 42500
GE-B7 F48 11 280
33.3 847
8.9 225
4.8 122
9.7 247
27.6 700
1840:1 1213 550
177 240
62471 84700
GE-C1 F30 7.2 183
26.8 680
5.3 135
2.7 68
6 152
15.7 400
372:1 311 141
144 195
11063 15000
GE-C2 F30 7.2 183
28.7 728
5.3 135
2.7 68
6 152
15.7 400
955:1 322 146
92 125
16226 22000
GE-C3 F35 8.5 216
28.4 721
5.9 150
2.3 82
7.3 185
19.7 500
402;1 573 260
162x2 220x2(1)
327450 37000
GE-C4 F35 8.5 216
29.1 738
5.9 150
2.3 82
7.3 185
19.7 500
1032:1 423 192
162 220
30978 42000
GE-C5 F40 9.7 247
30.2 768
7.1 180
3.6 91
8 203
23.6 600
1232:1 529 240
162 220
38353 52000
GE-C6 F48 11.5 292
35.4 898
7.7 195
4.1 103
8.9 226
27.6 700
838:1 893 405
207x2 280x2(1)
62693 85000
GE-C7 F60 14.2 360
40.1 1018
10.2 260
5.3 135
11.9 303
35.4 900
1560:1 2555 1159
207x2 280x2(1)
118010 160000
Note: (1) Requires 2 persons to operate.
25
TRUNNION BALL VALVE
SEAT AND SEAL MATERIAL SELECTION GUIDE
SEAT MATERIALS
Material Name
Description Operating Temperature
Operating Pressure Service Application
PTFE Virgin PTFE is the most widely used sealing material with excellent characteristics suitable for most services. It has excellent chemical resistance throughout valve industries and low coefficient of frication.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
General chemicals, low pressure services.
RPTFE RPTFE (Reinforced PTFE) is typically produced by adding 15% fiber glass to virgin PTFE. It has better pressure-temperature properties than virgin PTFE, better resistance to wear and deformation under load. NOT to be used in hydrofluroic acid
-112oF – 248oF -80oC– 120oC
Class 150 – 600 PN 20 – 100
For low and medium pressure services.
PCTFE PCTFE is a homopolymer of chlorotrifluoroethylene, featuring high compressive strength and low deformation under load.
-320oF – 248oF -196oC– 120oC
Class 150 – 300 PN 20 – 50
For low temperature low pressure services.
Nylon 6 Nylon is a common seat material for Class 600 valves. It is highly resistance to many chemicals and abrasions, and can be used in air, oil and other gas media. It is NOT suitable for strong oxidization agents.
-22oF – 176oF -30oC– 80oC
Class 150 –1500 PN 20 –250
For high pressure, low temperature services.
Devlon® Devlon® is a high molecular weight polyamide that is specifically tailored for high temperature/pressure applications in the offshore oil and gas sector.It is low moisture absorption.
-50oF – 302oF -46oC– 150oC
Class 150 –1500 PN 20 –250
For high pressure high temperature offshore services.
Nylon+MoS2 Molon (Nylon+MoS2) is a modified Nylon, the characteristics are similar to Devlon with it is cheaper than Devlon.
-20oF – 266oF -29oC– 130oC
Class 150 – 1500 PN 20 – 250
For high pressure, low temperature services.
PEEK PEEK is a high performance engineered thermoplastic. It is excellent in water/chemical resistance andit is unaffected by continuous exposure to hot water/steam
-148oF – 500oF -100oC– 260oC
Class 150 – 2500 PN 20 – 420
For high pressure high temperature services.
PPL PPL (Polyparaphenylene) is an excellent seat material with low coefficient of friction, highly resistant to pressure and temperature.
-50oF –482oF -46oC– 250oC
Class 150 – 300 PN 20 – 50
For high temperature low pressure services.
Delrin® Delrin® (Acetal Resin) possesses high tensile strength, creep resistance and toughness. It exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals.DO NOT use it on oxygen service or steam.
-50oF –194oF -46oC– 90oC
Class 150 – 600 PN 20 –100
For extreme pressure services.
TFM TFM (modified PTFE) is a chemically modified PTFE that offers enhanced properties while retaining all the proven advantages of a conventional PTFE.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
For services requiring high purity.
Metal Metal (typically stellite) seats are used in severe conditions where flashing, hydraulic shock, abrasive media or trapped metal may exist in the line.
Varies Varies For severe services.
O-RING MATERIALS
Material Name Description Operating Temperature
Operating Pressure
NBR Buna-N (NBR) is an all purpose polymer with good resistance to water, solvents, oil and hydraulic fluids.
-50oF –176oF -46oC– 80oC
Class 150 – 600 PN 20 –100
HNBR HNBR (Hydrogenated NBR) has similar media stability to NBR but with significantly better heat and oxidization stability.
-67oF – 337oF -55oC–170oC
Class 150 – 600 PN 20 – 100
Viton Viton (fluorocarbon) is a fluorocarbon elastomer that is compatible with a broad range of chemicals. It performs well in mineral acids, salt solutions, chlorinated hydrocarbons and petroleum oils
-49oF – 320oF -22oC– 204oC
Class 150 – 600 PN 20 – 100
EPDM EPDM has good abrasion and tear resistance with excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oil, strong acids and strong alkalines and should not be used in compressed air lines.
-50oF – 302oF -46oC– 150oC
Class 150 – 600 PN 20 – 100
FVMQ Fluorosilcione is a silicone polymer chain with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone.
-50oF – 320oF -46oC– 177oC
Class 150 – 600 PN 20 – 100
AFLAS® AFLAS® is highly resistant to a wide range of chemicals
-49oF – 428oF -29oC– 220oC
Class 150 – 600 PN 20 – 100
Seat Material Pressure-Temperature Rating (Operating)
26
TRUNNION BALL VALVE
FLOW COEFFICENT SPECIFICATION TABLE
Nominal Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Cv Kv Cv Kv Cv Kv Cv Kv Cv Kv
½ 15
25 21 25 18 20 17 16 14 16 14
¾ 20
56 48 56 40 4 3 34 29 34 29
1 25
95 81 95 69 64 54 55 47 55 47
1 ½ 40
308 262 308 223 308 262 165 140 165 140
2 50
500 425 430 361 370 315 320 272 320 272
3 80
1,360 1,156 1,100 983 1,020 867 920 782 820 697
4 100
2,500 2,125 2,000 1,806 1,850 1,573 1,760 1,496 1,600 1,360
6 150
4,060 3,451 4,056 2,933 3,410 2,899 4,300 3,655 4,150 3,528
8 200
8,090 6,877 7,700 5,845 6,730 5,721 8,475 7,204 8,010 6,809
10 250
13,510 11,484 13,090 9,761 11,120 9,452 14,160 12,036 13,220 11,237
12 300
20,440 17,374 19,830 14,768 17,440 14,824 21,200 18,020 18,800 15,980
14 350
25,050 21,293 23,770 18,099 22,010 18,709 26,700 22,695 24,180 20,553
16 400
34,200 29,070 32,595 24,710 29,980 25,483 36,600 31,110 33,150 28,178
18 450
44,430 37,766 43,200 32,101 39,520 33,592 49,000 41,650 45,703 38,848
20 500
57,665 49,015 55,380 41,663 50,450 42,883 64,600 54,910 60,750 51,638
22 550
70,080 59,568 70,080 50,633 68,900 58,565
24 600
87,680 74,528 84,720 63,349 76,630 65,136
28 700
120,000 102,000 115,350 86,700 107,510 91,384
30 750
141,850 120,573 136,600 102,487 125,630 106,786
32 800
160,390 136,332 152,200 115,882 140,900 119,765
36 900
205,450 174,633 192,995 148,438 239,160 203,286
40 1000
248,700 211,395 248,700 179,686 239,160 203,286
42 1050
275,260 233,971 275,260 198,875 275,260 233,971
48 1200
364,180 309,553 364,180 263,120 364,180 309,553
56 1400
529,430 450,016 529,430 382,513 520,500 442,425
CALCULATION OF FLOW COEFFICIENT Flow coefficient Cv (Kv is the metric equivalent) is the rate of flow in gallon per minute with the pressure drop of 1psi across the valve. The flow coefficients shown in the above table are determined with equations as follows: For liquids:
For gases (non-critical):
𝐐𝐥 = 𝐂𝐯 𝚫𝐏 𝐒𝐆 𝟏/𝟐 Where: Ql = Flow of liquid (gallon/minute) ΔP = Pressure drop in psi (P1-P2) SG = Specific gravity (1 for liquid)
𝐐𝐠 = 𝟔𝟏 ∙ 𝐂𝐯 𝐏𝟐 ∙ 𝐏𝟏 ∕ 𝐒𝐆 𝟏/𝟐 Where: Qg = Flow of gases (SFH at STP) P2 = Outlet pressure (psi) P1 = Inlet pressure (psi) SG = Specific gravity (1 for gas)
27
TRUNNION BALL VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
G e.g.
Nominal Size
A
1 6
Valve Type
B
B A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
4
Body Material
F
C 1
Trim Material
G
1 0
Seat or Insert
H
N
O-ring
I
1
is a NPS 16 Class 600 trunnion ball valve, RF flanged, 3-piece split body, A105 body, SS316 trim, Nylon seat insert, Viton O-ring, gear operated.
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
B Valve Type
BA Ball Valve
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125
4 Class 400
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
W Wafer
L Lug
E Construction
0 Special
3 2PC Body Trunnion
4 3PC Body Trunnion
6 Welded Body Trunnion
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 C F8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
G Trim Material
00 Special
01 F6a/F6a/410
02 304/304/304
09 Monel/Monel/Monel
10 316/316/316
13 Alloy 20/Alloy 20/Alloy 20
19 A105+ENP/A105+ENP/F6a
20 304L/304L/304L
21 316L/316L/316L
22 F321/F321/F321
23 F55/F55/F55
24 F51/F51/F51
25 F53/F53/F53
26 A105+ENP/A105+ENP/F316
27 304+ENP/304+ENP/304+ENP
28 Inconel 625/Inconel 625/F316
29 A105+ENP/A105+ENP/4140+ENP
30 A105+ENP/A105+ENP/A105+ENP
31 316/316/17-4PH
36 LF2+ENP/LF2+ENP/F6a
37 A105+TCC/A105+TCC/17-4PH
38 A105+TCC/A105+TCC/4140+ENP
39 A105+TCC/A105+TCC/F51
40 A105+ENP/A105+ENP/17-4PH
41 A105+Ni60/A105+Ni55/4140+ENP
42 A105+Ni60/A105+Ni60/17-4PH
44 Inconel 625/Inconel 625/Inconel 625
45 316+ENP/316+ENP/F316
46 316+ENP/316+ENP/F316+ENP
47 316+Ni60/316+Ni55/17-4PH
48 316L+Ni60/316L+Ni55/17-4PH
49 316+Ni60/316+Ni55/4140+ENP
50 316L+Ni60/316L+Ni55/4140+ENP
28
TRUNNION BALL VALVE
VALVE FIGURE NUMBER (CONT’D) HOW TO ORDER
Operation Mode
J
G e.g.
Nominal Size
A
1 6
Valve Type
B
B A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
4
Body Material
F
C 1
Trim Material
G
1 0
Seat or Insert
H
N
O-ring
I
1
is a NPS 16 Class 600 trunnion ball valve, RF flanged, 3-piece split body, A105 body, SS316 trim, Nylon seat insert, Viton O-ring, gear operated.
H Seat or Seat Insert
X Special
T PTFE
R RPTFE
N Nylon
V Viton
Q TFM
D Devlon
P PEEK
C PCTFE
H HNBR
M Metal
O Molon
E EPDM
L PPL
A Delrin
I O-Ring
0 None
1 Viton
2 Teflon
3 HNBR
4 NBR
5 Special
6 EPDM
7 FVMQ
8 FFKM
9 AFLAS
B Bare Stem
L Lever
G Gearbox
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
S Solid Lever
D Lever with locking device
R Solid lever with locking device
J Operation
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the
left while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If
the specification of the valve is not listed, select the code for “Special “. The total length of the figure number
shall be exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number,
which means eliminating “Specials”. If you don’t have enough specification or information about the valve you
are ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
FLOATING
BALL VALVE
BA-1402C (EN)
MISSION STATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
FLOATING BALL VALVE
TABLE OF INDEX PAGE
Introduction, Features 3-4
Overview, Split Body 5
Dimensions and Weights, Class 150 (PN 20) 6
Dimensions and Weights, Class 300 (PN 50) 7
Dimensions and Weights, Class 600 (PN 100) 8
Dimensions and Weights, Class 900/1500 (PN 150/250) 9
Overview, Split Body (SW/NPT) 10
Dimensions and Weights, Class 800/1500 (Short Pattern) 11
Dimensions and Weights, Class 800/1500 (Long Pattern) 12
Top Mounting Dimensions And Torque 13-14
Seat and Seal Material, Selection Guide 15
Valve Figure Number, How To Order 16-17
2
FLOATING BALL VALVE
This page is intentionally left blank.
3
FLOATING BALL VALVE
INTRODUCTION FEATURES
INTRODUCTION
A ball valve is a valve with a spherical disc, the part of the valve which controls the flow through it. The sphere has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked.
BLOWOUT PROOF STEM
The valve stem is made with a shoulder at the bottom end. It’s securely retained by the valve body, to avoid that the stem, under certain operating conditions, accidentally blows out. Other designs are available on request.
ANTI-STATIC
Because the ball and stem in a ball valve are suspended on non-metallic parts, i.e. the seat seal and stem seal, there is a possibility a static charge may build up on the stem-ball, a mechanical (antistatic metal spring and ball) is introduced in the design to maintain the metal-to-metal contact between the rotating ball/stem and the valve body which will ground any charges to the valve body.
FIRE SAFE DESIGN
During a fire, non-metallic soft material will be burnt, subsequently seat leakage or external leakage may occur and cause the fire to spread or contaminate the environment. FBV ball valves are fire tested in accordance with API 6FA or API 607 witnessed and certified by TUV SUD.
Antistatic ball
Antistaticspring
Stem
Packing
Ball
Body
Stem
Body
Ball
Seat-to-Ball Body-to-Closure Stem packing
Body Seat Ball
Body
Fire safe design
Ball
Fire safe design
Closure Body Gasket
Closure Body
Stem
Packing
Body
Thrust washer
Ball
Stem
Packing
Body
Fire safe design
Ball
4
FLOATING BALL VALVE
SCOPE OF PRODUCTS
Legends: A – Available in Casting and Forging B – Available in Casting Only C – Available Forging Only
D– Not Usually Required
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 800 PN 136
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
½ 15
A A A C C C C
¾ 20
A A A C C C C
1 25
A A A C C C C
1½ 40 A A A C C C
2 50 A A A C C C
2.5 65
A A A
3 80
A A AD
4 100
A A
6 150
A A
8 150
AD
FLOW COEFFICENT
Nominal Size
in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Cv Kv Cv Kv Cv Kv Cv Kv Cv Kv
½ 15
25 21 25 18 20 17 16 14 16 14
¾ 20
56 48 56 40 40 34 34 29 34 29
1 25
95 81 95 69 64 54 55 47 55 47
1½ 40
308 262 308 223 308 262 165 140 165 140
2 50
500 425 430 361 370 315 320 272 320 272
3 80
1,360 1,156 1,100 983 1,020 867 920 782 820 697
4 100
2,500 2,125 2,000 1,806 1,850 1,573 1,760 1,496 1,600 1,360
6 150
4,060 3,451 4,056 2,933 3,410 2,899 4,300 3,655 4,150 3,528
CALCULATION OF FLOW COEFFICIENT Flow coefficient Cv (Kv is the metric equivalent) is the rate of flow in gallon per minute with the pressure drop of 1 psi across the valve. The flow coefficients shown in the above table are determined with equations as follows:
For liquids:
For gases (non-critical):
𝐐𝐥 = 𝐂𝐯 𝚫𝐏 𝐒𝐆 𝟏/𝟐 Where: Ql = Flow of liquid (gallon/minute) ΔP = Pressure drop in psi (P1-P2) SG = Specific gravity (1 for liquid)
𝐐𝐠 = 𝟔𝟏 ∙ 𝐂𝐯 𝐏𝟐 ∙ 𝐏𝟏 ∕ 𝐒𝐆 𝟏/𝟐 Where: Qg = Flow of gases (SFH at STP) P2 = Outlet pressure (psi) P1 = Inlet pressure (psi) SG = Specific gravity (1 for gas)
5
FLOATING BALL VALVE
OVERVIEW 2-PIECE SPLIT BODY
Forge Steel Casting Steel
TYPICAL MATERIALS
Body/Closures (Forging) A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5, Inconel, Hastelloy, Monel (Casting) A216 WCB, A351 CF3, CF8, CF3M, CF8M, A352 LCB, LCC, LC2, A995 4A, 5A,
Ball CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS/SS+TCC, CS/SS+Ni60
Seat retainer CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS/SS+TCC, CS/SS+Ni55
Seal Ring PTFE, RPTFE, PCTFE, Devlon, PEEK
Stem A182 F6a, F316, F51, A105+ENP, AISI 4140+ENP, 17-4PH,XM-19
Packing Graphite, PTFE, RPTFE
O-ring Viton, HNBR, FVMQ, AFLAS
STANDARDS
Design & manufacture API 6D, API 608, ISO 14313
Face-to-face API 6D, ASME B16.10
End Dimension ASME B16.5 (RF, RTJ) ASME B16.25 (BW)
Test & inspection API 6D, API 598
Fire safe API 6FA, API 607
Other NACE MR 01-75, MR 0103
PART LIST
1
2
3
4
5
6
7
8
9
11
12
13
14
Body
O-ring
Gasket
Nut
Stud
Closure
Seat
Ball
Stem
Anti-static Spring
Anti-static Ball
Gland Flange
Lever
10 Packing
15 Gearbox
6
FLOATING BALL VALVE
ASME CLASS 150 (PN 20) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.5 4.25 - 4.25 1.77 3.15 4.89 7.87 1.77 3.15 4.33 7.87 6 7 15 12.7 12.7 108 108 45 80 114 200 45 80 110 200 2.5 3 ¾ 0.75 0.75 4.62 - 4.62 1.97 3.47 5.31 7.87 1.97 3.35 5.11 7.87 8 9 20 19.1 19.1 117 117 50 85 135 200 50 85 130 200 3.5 4 1 1 1 5 5.5 5 2.16 3.54 6.3 7.87 2.16 3.54 6.1 7.87 12 15 25 25.4 25.4 127 140 127 55 90 160 200 55 90 155 200 5.6 6.5
1¼ 1.25 1.25 5.5 6 5.5 2.36 4.33 6.70 9.84 2.36 4.33 6.5 9.84 14 21 32 31.8 31.8 140 153 140 60 110 170 250 60 110 165 250 6.2 9.4
1½ 1.5 1.5 6.5 7 6.5 2.48 4.53 7.10 13 2.48 4.53 6.97 13 16 17 40 38.1 38.1 165 178 165 63 115 180 330 63 115 177 330 7 12
2 1.94 1.94 7 7.5 7 3 5.9 7.5 13 3 5.6 7.32 13 29 35 50 49 49 178 191 178 76 150 191 330 76 142 186 330 13 16
2½ 2.44 2.44 7.5 8 7.5 3.45 6.1 7.83 13 3.45 5.9 7.67 13 35 44
65 62 62 191 203 191 85 155 200 330 85 150 195 330 16 20
3 2.91 2.91 8 8.5 8 3.74 6.3 8.46 13 3.74 6.1 8.1 13 49 64
80 74 74 203 216 203 95 160 215 330 95 155 206 330 22 29
4 3.94 3.94 9 9.5 9 4.33 8.27 10.04 18.11 4.33 7.67 9.5 18.11 83 106 100 100 100 229 242 229 110 210 255 460 110 195 242 460 37.5 48
6 5.91 5.91 15.5 16 15.5 6.70 12.2 12.87 30.3 6.70 11.22 12.44 30.3 216 304 150 150 150 394 407 394 170 310 327 770 170 285 316 770 98 138
ASME CLASS 150 (PN 20) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.375 4.25 - 4.25 1.77 3.15 4.89 7.87 1.77 3.15 4.33 7.87 6 7 15 12.7 9.5 108 108 45 80 114 200 45 80 110 200 2.5 3 ¾ 0.75 0.5 4.62 - 4.62 1.97 3.15 4.89 7.87 1.97 3.35 5.11 7.87 7 8 20 19.1 12.7 117 117 50 80 114 200 50 85 130 200 3 3.5
1 1 0.75 5 5.5 5 2.16 3.47 5.31 7.87 2.16 3.54 6.1 7.87 10 12 25 25.4 19.1 127 140 127 55 85 135 200 55 90 155 200 4.5 5.5 1¼ 1.25 1 5.5 6 5.5 2.36 3.54 6.3 7.87 2.36 4.33 6.5 9.84 12 16 32 31.8 25.4 140 153 140 60 90 160 200 60 110 165 250 5.5 7.2 1½ 1.5 1.25 6.5 7 6.5 2.48 4.33 6.70 9.84 2.48 4.53 6.97 13 14 18 40 38.1 31.8 165 178 165 63 110 170 250 63 115 177 330 6.3 8 2 1.94 1.5 7 7.5 7 3 4.53 7.10 13 3 5.6 7.32 13 20 30
50 49 38.1 178 191 178 76 115 180 330 76 142 186 330 9 13.5
2½ 2.44 1.94 7.5 8 7.5 3.45 5.9 7.5 13 3.45 5.9 7.67 13 32 39
65 62 49 191 203 191 85 150 191 330 85 150 195 330 14.5 17.5
3 2.91 1.94 8 8.5 8 3.74 6.1 7.83 13 3.74 6.1 8.1 13 42 51
80 74 49 203 216 203 95 155 200 330 95 155 206 330 19 23
4 3.94 2.91 9 9.5 9 4.33 6.3 8.46 13 4.33 7.67 9.5 18.11 66 85
100 100 74 229 242 229 110 160 215 330 110 195 242 460 30 38.5
6 5.91 3.94 15.5 16 15.5 6.70 8.27 10.04 18.11 6.70 11.22 12.44 30.3 133 205 150 150 100 394 407 394 170 210 255 460 170 285 316 770 60 93
8 8 5.91 18 18.5 18 6.73 12.2 12.87 30.3 6.73 11.22 12.44 30.3 234 289
201 201 150 457 470 457 175 310 327 770 175 285 316 770 106 131
1. The dimension and weights are for reference only and subject to change without notice. 2. Contact sales representative if further information is needed.
DIMENSIONS AND WEIGHTS ASME CLASS 150 ( PN 20)
7
FLOATING BALL VALVE
ASME CLASS 300 (PN 50) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.5 5.5 5.94 5.5 1.77 3.15 4.89 7.87 1.77 3.15 4.33 7.87 8 9 15 12.7 12.7 140 151 140 45 80 114 200 45 80 110 200 3.5 4 ¾ 0.75 0.75 5.98 6.61 6 1.97 3.47 5.31 7.87 1.97 3.35 5.11 7.87 9 13 20 19.1 19.1 152 168 152 50 85 135 200 50 85 130 200 4 6 1 1 1 6.5 7.13 6.5 2.16 3.54 6.3 7.87 2.16 3.54 6.1 7.87 12 18
25 25.4 25.4 165 181 165 55 90 160 200 55 90 155 200 5.3 8
1¼ 1.25 1.25 7 7.64 7 2.36 4.33 6.70 9.84 2.36 4.33 6.5 9.84 21 3 32 31.8 31.8 178 194 178 60 110 170 250 60 110 165 250 9.5 13.5
1½ 1.5 1.5 7.5 8.11 7.5 2.48 4.53 7.10 13 2.48 4.53 6.97 13 29 140 40 38.1 38.1 190 206 190 63 115 180 330 63 115 177 330 13 8
2 1.94 1.94 8.5 9.13 8.5 3 5.9 7.5 13 3 5.6 7.32 13 38 51
50 49 49 216 232 216 76 150 191 330 76 142 186 330 17 23
2½ 2.44 2.44 9.5 10.12 9.5 3.45 6.1 7.83 13 3.45 5.9 7.67 13 55 62
65 62 62 241 257 241 85 155 200 330 85 150 195 330 25 28
3 2.91 2.91 11.1 11.73 11.1 3.74 6.3 8.46 22.05 3.74 6.1 8.1 22.05 77 93
80 74 74 282 298 282 95 160 215 560 95 155 206 560 35 42
4 3.94 3.94 12 12.64 12 4.33 8.27 10.04 22.05 4.33 7.67 9.5 22.05 117 148
100 100 100 305 321 305 110 210 255 560 110 195 242 560 53 67
6 5.91 5.91 15.87 16.5 15.87 6.70 12.2 12.87 31.8 6.70 11.22 12.44 31.8 249 331
150 150 150 403 419 403 170 310 327 800 170 285 316 800 113 150
ASME CLASS 300 (PN 50) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.375 4.25 - 4.25 1.77 3.15 4.89 7.87 1.77 3.15 4.33 7.87 7 9 15 12.7 9.5 108 108 45 80 114 200 45 80 110 200 3.3 4.2
¾ 0.75 0.5 4.62 - 4.62 1.97 3.15 4.89 7.87 1.97 3.35 5.11 7.87 8 11 20 19.1 12.7 117 117 50 80 114 200 50 85 130 200 3.8 5 1 1 0.75 5 5.5 5 2.16 3.47 5.31 7.87 2.16 3.54 6.1 7.87 10 15 25 25.4 19.1 127 140 127 55 85 135 200 55 90 155 200 4.5 7
¼ 1.25 1 5.5 6 5.5 2.36 3.54 6.3 7.87 2.36 4.33 6.5 9.84 17 20 32 31.8 25.4 140 153 140 60 90 160 200 60 110 165 250 7.5 9 1½ 1.5 1.25 6.5 7 6.5 2.48 4.33 6.70 9.84 2.48 4.53 6.97 13 20 24 40 38.1 31.8 165 178 165 63 110 170 250 63 115 177 330 9 11 2 1.94 1.5 7 7.5 7 3 4.53 7.10 13 3 5.6 7.32 13 33 44 50 49 38.1 178 191 178 76 115 180 330 76 142 186 330 15 20
2½ 2.44 1.94 7.5 8 7.5 3.45 5.9 7.5 13 3.45 5.9 7.67 13 51 55 65 62 49 191 203 191 85 150 191 330 85 150 195 330 23 25
3 2.91 1.94 8 8.5 8 3.74 6.1 7.83 13 3.74 6.1 8.1 13 71 77
80 74 49 203 216 203 95 155 200 330 95 155 206 330 32 35
4 3.94 2.91 9 9.5 9 4.33 6.3 8.46 13 4.33 7.67 9.5 18.11 106 128 100 100 74 229 242 229 110 160 215 330 110 195 242 460 48 58
6 5.91 3.94 15.5 16 15.5 6.70 8.27 10.04 18.11 6.70 11.22 12.44 30.3 187 238
150 150 100 394 407 394 170 210 255 460 170 285 316 770 85 108
8 8 5.91 18 18.5 18 6.73 12.2 12.87 30.3 6.73 11.22 12.44 30.3 297 419
201 201 150 457 470 457 175 310 327 770 175 285 316 770 135 190
1. The dimension and weights are for reference only and subject to change without notice. 2. Contact sales representative if further information is needed.
DIMENSIONS AND WEIGHTS ASME CLASS 300 ( PN 50)
8
FLOATING BALL VALVE
ASME CLASS 600 (PN 100) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.5 16.5 6.42 16.5 1.89 3.15 4.69 7.87 1.89 2.95 4.69 7.87 6 8 15 12.7 12.7 65 163 65 48 80 119 200 48 75 119 200 2.8 3.8
¾ 0.75 0.75 7.48 7.48 7.48 2.28 3.35 5.51 7.87 2.28 3.15 5.51 7.87 12 14 20 19.1 19.1 190 190 190 58 85 140 200 58 80 140 200 5.3 6.2
1 1 1 8.5 8.5 8.5 2.48 3.54 6.69 7.87 2.48 3.35 6.69 7.87 18 25
25 25.4 25.4 216 216 216 63 90 170 200 63 85 170 200 8 11.5
1¼ 1.25 1.25 9.02 9.02 9.02 2.87 4.33 7.09 11.81 2.87 4.13 7.09 11.81 25 33 32 31.8 31.8 229 229 229 73 110 180 300 73 105 180 300 11 15
1½ 1.5 1.5 9.49 9.49 9.49 3.07 4.53 7.48 13 3.07 4.33 7.48 13 230 40 40 38.1 38.1 241 241 241 78 115 190 330 78 110 190 330 13.6 18
2 1.94 1.94 11.5 11.61 11.5 3.23 5.91 7.87 13 3.23 5.71 7.87 13 42 66 50 49 49 292 295 292 82 150 200 330 82 145 200 330 19 30
2½ 2.44 2.44 12.99 13.11 12.99 3.74 6.5 8.46 22.05 3.74 6.3 8.46 22.05 71 106 65 62 62 330 333 330 95 165 215 560 95 160 215 560 32 48
3 2.91 2.91 14.02 14.13 14.02 4.33 7.28 8.9 31.5 4.33 7.09 8.9 31.5 113 144 80 74 74 356 359 356 110 185 226 800 110 180 226 800 51 65
ASME CLASS 600 (PN 100) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.375 16.5 6.42 16.5 1.89 3.15 4.53 7.87 1.89 2.95 4.43 7.87 9 10
15 12.7 9.5 65 163 65 48 80 115 200 48 75 110 200 4 4.5
3/4 0.75 0.5 7.48 7.48 7.48 2.28 3.35 4.69 7.87 2.28 3.15 4.53 7.87 10 11 20 19.1 12.7 190 190 190 58 85 119 200 58 80 115 200 4.5 4.8
1 1 0.75 8.5 8.5 8.5 2.48 3.54 5.51 7.87 2.48 3.35 5.31 7.87 14 20
25 25.4 19.1 216 216 216 63 90 140 200 63 85 135 200 6.5 9
1¼ 1.25 1 9.02 9.02 9.02 2.87 4.33 6.69 7.87 2.87 4.13 6.5 7.87 19 28
32 31.8 25.4 229 229 229 73 110 170 200 73 105 165 200 8.5 12.5
1½ 1.5 1.25 9.49 9.49 9.49 3.07 4.53 7.09 11.81 3.07 4.33 6.89 11.81 23 33
40 38.1 31.8 241 241 241 78 115 180 300 78 110 175 300 10.5 15
2 1.94 1.5 11.5 11.61 11.5 3.23 5.91 7.48 13 3.23 5.71 7.28 13 35 46
50 49 38.1 292 295 292 82 150 190 330 82 145 185 330 16 21
2½ 2.44 1.94 12.99 13.11 12.99 3.74 6.5 7.87 13 3.74 6.3 7.68 13 58 66
65 62 49 330 333 330 95 165 200 330 95 160 195 330 26.5 30
3 2.91 1.94 14.02 14.13 14.02 1.89 7.28 8.46 22.05 4.33 7.09 8.27 22.05 84 79
80 74 49 356 359 356 48 185 215 560 110 180 210 560 38 36
4 3.94 2.91 17 17.13 17 5.43 16.93 8.9 31.5 5.43 16.93 8.66 31.5 137 174 100 100 74 432 435 432 138 230 226 800 138 230 220 800 62 79
1. The dimension and weights are for reference only and subject to change without notice. 2. Contact sales representative if further information is needed.
DIMENSIONS AND WEIGHTS ASME CLASS 600 (PN 100)
9
FLOATING BALL VALVE
DIMENSIONS AND WEIGHTS ASME CLASS 900/1500 (PN 150/2500)
ASME CLASS 900/1500 (PN 150/250) FULL BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.5 8.5 8.5 8.5 - - - - 2.36 2.76 - 7.87 - 20
15 12.7 12.7 216 216 216 60 70 200 9
¾ 0.75 0.75 9.02 9.02 9.02 - - - - 2.56 3.03 - 9.84 - 24 20 19.1 19.1 229 229 229 65 77 250 11
1 1 1 10 10 10 - - - - 2.95 3.35 - 9.84 - 42
25 25.4 25.4 254 254 254 75 85 250 19
1¼ 1.25 1.25 10.98 10.98 10.98 - - - - 3.15 3.74 - 13 - 59
32 31.8 31.8 279 279 279 80 95 330 27
1½ 1.5 1.5 12.01 12.01 12.01 - - - - 3.54 4.33 - 19.69 - 71
40 38.1 38.1 305 305 305 90 110 500 32
2 1.94 1.94 14.49 14.61 14.49 - - - - 4.25 5.31 - 24 - 121 50 49 49 368 371 368 108 135 610 55
ASME CLASS 900/1500 (PN 150/250) REDUCED BORE
Size in/mm
D D1 L Casting Forging Weight
RF RTJ BW A B B1 W A B B1 W Casting (lb/kg)
Forging (lb/kg)
½ 0.5 0.375 8.5 8.5 8.5 - - - - 2.36 2.76 - 7.87 - 16.5
15 12.7 9.5 216 216 216 60 70 200 7.5
¾ 0.75 0.5 9.02 9.02 9.02 - - - - 2.36 2.76 - 7.87 - 20 20 19.1 12.7 229 229 229 60 70 200 9
1 1 0.75 10 10 10 - - - - 2.56 3.03 - 9.84 - 29
25 25.4 19.1 254 254 254 65 77 250 13
1¼ 1.25 1 10.98 10.98 10.98 - - - - 2.95 3.35 - 9.84 - 40 32 31.8 25.4 279 279 279 75 85 250 18
1½ 1.5 1.25 12.01 12.01 12.01 - - - - 3.15 3.74 - 13 - 53
40 38.1 31.8 305 305 305 80 95 330 24
2 1.94 1.5 14.49 14.61 14.49 - - - - 3.54 4.33 - 19.69 - 95
50 49 38.1 368 371 368 90 110 500 43
2½ 2.44 1.94 16.5 16.61 16.5 - - - - 4.25 5.31 24 - 137
65 62 49 419 422 419 108 135 610 62
1. The dimension and weights are for reference only and subject to change without notice. 2. Contact sales representative if further information is needed.
10
FLOATING BALL VALVE
OVERVIEW 3-PIECE SPLIT BODY
Floating Ball with 3 Piece design is provided in forged material in long pattern and short pattern.
Short Pattern: Mainly applies for soft seated with lever operation.
Long Pattern: Can be applied for metal seat, stem extension, or bare stem, or actuated ball valves, or full welded
and butt welded;
STANDARDS
Design & manufacture
API 608, ISO 17292, ASME B16.34,
Face-to-face MFG' STD
End Dimension ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW) Or ASME B36.10(BW)
Test & inspection API 598
Fire safe API 6FA, API 607
Other NACE MR 01-75, MR 0103
TYPICAL MATERIALS
Body/Closures (Forging) A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5, Inconel, Hastelloy, Monel
Ball A182 F304, F304L, F316, F316L, F51, F53, CS/SS+TCC, CS/SS+Ni60
Seal Ring PTFE, RPTFE, PCTFE, Devlon, PEEK
Stem F316, F51, 17-4PH,XM-19
Packing Graphite, PTFE, RPTFE
O-ring Viton, HNBR, FVMQ, AFLAS
PART LIST
1
2
3
4
5
6
7
8
09
10
11
12
13
Body
Gasket
Bolt
Closure
Seat
Ball
Anti-static Spring
Anti-static Ball
Stem
Thrust Washer
Packing
Packing Gland
Belleville Spring
14 Stopper Washer
15 Lever
16 Nut
11
FLOATING BALL VALVE
DIMENSIONS AND WEIGHT(SW/ NPT - Short Pattern) ASME CLASS 800/ CLASS1500
ASME CLASS 800 (PN136)
Size in/mm
D1 L Forging Weight
SW / NPT A B D W SW / NPT (lb/kg)
½ 0.5 3.11 1.57 2.56 3.15 7.87 6.5
15 12.7 79 40 65 80 200 2.9
¾ 0.75 3.62 1.67 3.03 3.35 7.87 8.6
20 19.1 92 42.5 77 85 200 3.9
1 1 4.37 1.87 3.35 3.7 7.87 12
25 25.4 111 47 85 94 200 5.6
1¼ 1.25 5.51 2.2 3.74 4.33 11.81 20 32 31.8 140 56 95 110 300 9
1½ 1.5 5.51 2.42 4.33 4.48 11.81 26
40 38.1 140 61.5 110 123 300 11.8
2 1.94 5.98 2.93 5.31 5.87 13 41
50 49 152 74.5 135 149 330 18.5
1. Face to Face dimension for pressure ratingCL150~CL600 SW/NPT ball valve can refer to the dimension specified on table above for CL800.
2. The face to face and outline dimension for reduce ball valve are the same as full bore ball valve, just the flow port dimension has been reduced.
3. Short Pattern only applies to the SW/NPT soft seat ball valve with lever operation.
ASME CLASS1500 (PN 250)
Size in/mm
D L Forging Weight
SW / NPT A B D W SW / NPT (lb/kg)
½ 0.5 3.62 1.65 3.11 3.31 7.87 9
15 12.7 92 42 79 84 200 3.9
¾ 0.75 4.37 1.93 3.46 3.74 9.84 13
20 19.1 111 49 88 95 250 5.9
1 1 5 2.09 3.54 4.17 9.84 18
25 25.4 127 53 90 106 250 8.3
1¼ 1.25 5.51 2.44 4.53 4.33 13 30
32 31.8 140 62 115 110 330 13.5
1½ 1.5 5.98 2.76 5.12 5.51 19.3 38
40 38.1 152 70 130 140 490 17
2 1.94 7.01 3.31 5.91 6.61 24 63
50 49 178 84 150 168 610 28.3
1. The face to face and outline dimension for reduce ball valve are the same as full bore ball valve, just the flow port dimension has been reduced.
2. Short Pattern only applies to the SW/NPT soft seat ball valve with lever operation.
12
FLOATING BALL VALVE
DIMENSIONS AND WEIGHT(SW/ NPT - Long Pattern) ASME CLASS 800/CLASS1500
ASME CLASS 800 (PN136)
Size in/mm
D1
L Forging Weight
SW / NPT A B D W SW / NPT (lb/kg)
½ 0.5 4.25 1.89 3.44 3.78 7.87 12
15 12.7 108 48 87.5 96 200 5.5
¾ 0.75 4.61 2.07 3.54 4.13 7.87 13 20 19.1 117 52.5 90 105 200 5.8
1 1 5 2.17 3.64 4.33 7.87 15
25 25.4 127 55 92.5 110 200 6.7
1¼ 1.25 5.51 2.64 5.12 5.28 11.81 29
32 31.8 140 67 130 134 300 13
1½ 1.5 6.5 3.05 5.91 6.1 11.81 36
40 38.1 165 77.5 150 155 300 16
2 1.94 7.01 3.25 6.69 6.5 13 51
50 49 178 82.5 170 165 330 23
1. Face to Face dimension for pressure rating CL150~CL600 SW/NPT ball valve can refer to the dimension specified on table above for CL800.
2. The face to face and outline dimension for reduce ball valve are the same as full bore ball valve.
3. Long pattern can be applied to the ball valve with structure of metal seat, stem extension, or bare stem, or actuated ball valves, or full welded and butt
welded.
ASME CLASS1500 (PN 250)
Size in/mm
D
L Forging Weight
SW / NPT A B D W SW / NPT (lb/kg)
½ 0.5 5.51 2.24 3.74 4.49 7.87 18
15 12.7 140 57 95 114 200 8
¾ 0.75 5.98 2.48 4.02 4.96 9.84 2
20 19.1 152 63 102 126 250 11
1 1 6.5 2.56 4.37 5.12 9.84 29
25 25.4 165 65 111 130 250 13
1¼ 1.25 7 3.07 5.12 5.71 13 39 32 31.8 178 78 130 145 330 17.5
1½ 1.5 7.48 3.43 5.91 6.3 19.3 46
40 38.1 190 87 150 160 490 21
2 1.94 8.5 3.54 6.69 7.09 24 83
50 49 216 90 170 180 610 37.5
1. Face to Face dimension for pressure rating CL900 SW/NPT ball valve can refer to the dimension specified on table above for CL1500.
2. The face to face and outline dimension for reduce ball valve are the same as full bore ball valve.
3. Long pattern can be applied to the ball valve with structure of metal seat, stem extension, or bare stem, or actuated ball valves, or full welded and butt
welded.
13
FLOATING BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE NPS 1/2-6 (DN 15-150)
Size in/mm
Rating Class/PN
Torque(1)
ft-lb/N-m ISO F#
A B D E n-Φd(2) H Drive Key a x b
f
1/2 15
150 20
15 20
F04 2.13 54
1.65 42
0.47 12
0.2 5
4-Φ0.24 4-Φ6
0.79 20
0.16x 0.16 4x 4
0.53 13.5
300 50
18 25
F04 2.13 54
1.65 42
0.47 12
0.2 5
4-Φ0.24 4-Φ6
0.79 20
0.16x 0.16 4x 4
0.53 13.5
600
100
22
30 F05
2.56
65
1.97
50
0.47
12
0.2
5
4-Φ0.31
4-Φ8
0.79
20
0.16x 0.16
4x 4
0.53
13.5
800/900
136/150
26
35 F05
2.56
65
1.97
50
0.47
12
0.2
5
4-Φ0.31
4-Φ8
0.79
20
0.16x 0.16
4x 4
0.53
13.5
1500 250
30 40
F05 2.56 65
1.97 50
0.63 16
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.2 x 0.2 5x 5
0.71 18
2500 420
37 50
F05 2.56 65
1.97 50
0.63 16
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.2 x 0.2 5x 5
0.71 18
3/4 20
150 20
22 30
F04 2.13 54
1.65 42
0.55 14
0.2 5
4-Φ0.24 4-Φ6
1 25
0.2 x 0.2 5x 5
0.63 26
300 50
26 35
F04 2.13 54
1.65 42
0.55 14
0.2 5
4-Φ0.24 4-Φ6
1 25
0.2 x 0.2 5x 5
0.63 26
600
100
30
40 F05
2.56
65
1.97
50
0.63
16
0.2
5
4-Φ0.31
4-Φ8
1.18
30
0.2 x 0.2
5x 5
0.71
18
800/900
136/150
33
45 F05
2.56
65
1.97
50
0.63
16
0.2
5
4-Φ0.31
4-Φ8
1.18
30
0.2 x 0.2
5x 5
0.71
18
1500 250
37 50
F05 2.56 65
1.97 50
0.79 20
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
2500 420
44 60
F05 2.56 65
1.97 50
0.79 20
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
1 25
150 20
30 40
F05 2.56 65
1.97 50
0.63 16
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.2 x 0.2 5x 5
0.71 18
300 50
37 50
F05 2.56 65
1.97 50
0.63 16
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.2 x 0.2 5x 5
0.71 18
600
100
44
60 F05
2.56
65
1.97
50
0.63
16
0.2
5
4-Φ0.31
4-Φ8
1.18
30
0.2 x 0.2
5x 5
0.71
18
800/900
136/150
52
70 F05
2.56
65
1.97
50
0.63
16
0.2
5
4-Φ0.31
4-Φ8
1.18
30
0.2 x 0.2
5x 5
0.71
18
1500 250
59 80
F07 3.54 90
2.76 70
0.79 20
0.24 6
4-Φ0.39 4-Φ10
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
2500 420
66 90
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
1-1/4
32
150 20
37 50
F05 2.56 65
1.97 50
0.79 20
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
300 50
44 60
F05 2.56 65
1.97 50
0.79 20
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
600
100
74
100 F07
3.54
90
2.76
70
0.79
20
0.24
6
4-Φ0.39
4-Φ10
1.18
30
0.24 x 0.24
6 x 6
0.93
23.5
800/900
136/150
111
150 F07
3.54
90
2.76
70
0.79
20
0.24
6
4-Φ0.39
4-Φ10
1.18
30
0.24 x 0.24
6 x 6
0.93
23.5
1500 250
148 200
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
14
FLOATING BALL VALVE
TOP MOUNTING DIMENSIONS AND TORQUE NPS 1/2-6 (DN 15-150)
(1) Torque doesn’t include safety factor. The torque is based on seats of PTFE/RPTFE (Class 150 – 300), Devlon (Class 900 – 1500), and PEEK (Class 2500). Torque shall be as follows if other than the base seat material is selected:
PTFE/RPTFE Devlon PCTFE TFM Delrin PPL PEEK Metal
Base x 1 x 0.8 X 0.8 x 1 X 0.8 x 1.3 x 2.2
(2) Number of bolt holes and bolt hole diameter.
Size in/mm
Rating Class/PN
Torque(1)
ft-lb/N-m ISO F#
A B D E n-Φd(2) H Drive Key a x b
f
1-1/2
40
150 20
37 50
F05 2.56 65
1.97 50
0.79 20
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
300 50
44 60
F05 2.56 65
1.97 50
0.79 20
0.2 5
4-Φ0.31 4-Φ8
1.18 30
0.24 x 0.24 6 x 6
0.93 23.5
600
100
74
100 F07
3.54
90
2.76
70
0.79
20
0.24
6
4-Φ0.39
4-Φ10
1.18
30
0.24 x 0.24
6 x 6
0.93
23.5
800/900
136/150
111
150 F07
3.54
90
2.76
70
0.79
20
0.24
6
4-Φ0.39
4-Φ10
1.18
30
0.24 x 0.24
6 x 6
0.93
23.5
1500 250
148 200
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
2 50
150 20
44 60
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
300 50
52 70
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
600 100
89 120
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
800/900
136/150
148
200 F10
40.2
125
4.92
102
0.94
24
0.24
6
4-Φ0.47
4-Φ12
1.57
40
0.31 x 0.28
8 x 7
1.06
27
1500
250
184
250 F12
5.91
150
4.92
125
1.1
28
0.31
8
4-Φ0.55
4-Φ14
1.77
45
0.31 x 0.28
8 x 7
1.22
31
2-1/2 65
150 20
59 80
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
300 50
96 130
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
600 100
148 200
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
3 80
150 20
111 150
F10 40.2 125
4.92 102
0.94 24
0.24 6
4-Φ0.47 4-Φ12
1.57 40
0.31 x 0.28 8 x 7
1.06 27
300
50
148
200 F12
5.91
150
4.92
125
1.1
28
0.31
8
4-Φ0.55
4-Φ14
1.77
45
0.31 x 0.28
8 x 7
1.22
31
600
100
184
250 F12
5.91
150
4.92
125
1.1
28
0.31
8
4-Φ0.55
4-Φ14
1.77
45
0.31 x 0.28
8 x 7
1.22
31
4
100
150 20
148 200
F12 5.91 150
4.92 125
1.1 28
0.31 8
4-Φ0.55 4-Φ14
1.77 45
0.31 x 0.28 8 x 7
1.22 31
300 50
258 350
F12 5.91 150
4.92 125
1.42 36
0.31 8
4-Φ0.55 4-Φ14
2.36 60
0.39 x 0.31 10 x 8
1.54 39
6 150
150 20
332 450
F12 5.91 150
4.92 125
1.42 36
0.31 8
4-Φ0.55 4-Φ14
2.36 60
0.39 x 0.31 10 x 8
1.54 39
300 50
516 700
F12 5.91 150
4.92 125
1.57 40
0.31 8
4-Φ0.55 4-Φ14
2.36 60
0.47 x 0.31 12 x 8
1.69 43
15
FLOATING BALL VALVE
SEAT AND SEAL MATERIAL SELECTION GUIDE
SEAT MATERIALS
Material Name
Description Operating
Temperature Operating Pressure Service Application
PTFE Virgin PTFE is the most widely used sealing material with excellent characteristics suitable for most services. It has excellent chemical resistance throughout valve industries and low coefficient of frication.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
General chemicals, low pressure services.
RPTFE
RPTFE (Reinforced PTFE) is typically produced by adding 15% fiber glass to virgin PTFE. It has better pressure-temperature properties than virgin PTFE, better resistance to wear and deformation under load. NOT to be used in hydrofluroic acid
-112oF – 248oF -80oC– 120oC
Class 150 – 600 PN 20 – 100
For low and medium pressure services.
PCTFE PCTFE is a homopolymer of chlorotrifluoroethylene, featuring high compressive strength and low deformation under load.
-320oF – 248oF -196oC– 120oC
Class 150 – 300 PN 20 – 50
For low temperature low pressure services.
Nylon 6 Nylon is a common seat material for Class 600 valves. It is highly resistance to many chemicals and abrasions, and can be used in air, oil and other gas media. It is NOT suitable for strong oxidization agents.
-22oF – 176oF -30oC– 80oC
Class 150 –1500 PN 20 –250
For high pressure, low temperature services.
Devlon® Devlon® is a high molecular weight polyamide that is specifically tailored for high temperature/pressure applications in the offshore oil and gas sector. It is low moisture absorption.
-50oF – 302oF -46oC– 150oC
Class 150 –1500 PN 20 –250
For high pressure high temperature offshore services.
Nylon+MoS2 Molon (Nylon+MoS2) is a modified Nylon, the characteristics are similar to Devlon with it is cheaper than Devlon.
-20oF – 266oF -29oC– 130oC
Class 150 – 1500 PN 20 – 250
For high pressure, low temperature services.
PEEK PEEK is a high performance engineered thermoplastic. It is excellent in water/chemical resistance andit is unaffected by continuous exposure to hot water/steam
-148oF – 500oF -100oC– 260oC
Class 150 – 2500 PN 20 – 420
For high pressure high temperature services.
PPL PPL (Polyparaphenylene) is an excellent seat material with low coefficient of friction, highly resistant to pressure and temperature.
-50oF –482oF -46oC– 250oC
Class 150 – 300 PN 20 – 50
For high temperature low pressure services.
Delrin®
Delrin® (Acetal Resin) possesses high tensile strength, creep resistance and toughness. It exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals.DO NOT use it on oxygen service or steam.
-50oF –194oF -46oC– 90oC
Class 150 – 600 PN 20 –100
For extreme pressure services.
TFM TFM (modified PTFE) is a chemically modified PTFE that offers enhanced properties while retaining all the proven advantages of a conventional PTFE.
-112oF – 320oF -80oC– 160oC
Class 150 PN 20
For services requiring high purity.
Metal Metal (typically stellite) seats are used in severe conditions where flashing, hydraulic shock, abrasive media or trapped metal may exist in the line.
Varies Varies For severe services.
O-RINGMATERIALS
Material Name Description Operating
Temperature Operating Pressure
NBR Buna-N (NBR) is an all purpose polymer with good resistance to water, solvents, oil and hydraulic fluids.
-50oF –176oF -46oC– 80oC
Class 150 – 600 PN 20 –100
HNBR HNBR (Hydrogenated NBR) has similar media stability to NBR but with significantly better heat and oxidization stability.
-67oF –338oF -55oC– 170oC
Class 150 – 2500 PN 20 – 420
Viton Viton (fluorocarbon) is a fluorocarbon elastomer that is compatible with a broad range of chemicals. It performs well in mineral acids, salt solutions, chlorinated hydrocarbons and petroleum oils
-20oF – 400oF -29oC– 204oC
Class 150 – 2500 PN 20 – 420
EPDM EPDM has good abrasion and tear resistance with excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oil, strong acids and strong alkalines and should not be used in compressed air lines.
-50oF – 302oF -46oC– 150oC
Class 150 – 1500 PN 20 – 250
FVMQ Fluorosilcione is a silicone polymer chain with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone.
-50oF – 350oF -46oC– 177oC
Class 150 – 1500 PN 20 – 250
AFLAS® AFLAS® is highly resistant to a wide range of chemicals -49oF – 428oF -29oC– 220oC
Class 150 – 1500 PN 20 – 250
Seat Material Pressure-Temperature Rating (Operating)
16
FLOATING BALL VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
L e.g.
Nominal Size
A
0 1
Valve Type
B
B A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 1
Trim Material
G
1 0
Seat or Insert
H
R
O-ring
I
0
NPS 1 Class 600 floating ball valve, RF flanged, 2-piece split body, A105 body, SS316 trim, RPTFE seat insert, No O-ring, Lever operated.
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
B Valve Type
BA Ball Valve
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125
4 Class 400
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
W Wafer
L Lug
E Construction
0 Special
1 2PC Body Floating
2 3PC Body Floating 5
Welded Body Floating
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 C F8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
G Trim Material
00 Special
01 F6a/F6a/410
02 304/304/304
09 Monel/Monel/Monel
10 316/316/316
13 Alloy 20/Alloy 20/Alloy 20
19 A105+ENP/A105+ENP/F6a
20 304L/304L/304L
21 316L/316L/316L
22 F321/F321/F321
23 F55/F55/F55
24 F51/F51/F51
25 F53/F53/F53
26 A105+ENP/A105+ENP/F316
27 304+ENP/304+ENP/304+ENP
28 Inconel 625/Inconel 625/F316
29 A105+ENP/A105+ENP/4140+ENP
30 A105+ENP/A105+ENP/A105+ENP
31 316/316/17-4PH
36 LF2+ENP/LF2+ENP/F6a
37 A105+TCC/A105+TCC/17-4PH
38 A105+TCC/A105+TCC/4140+ENP
39 A105+TCC/A105+TCC/F51
40 A105+ENP/A105+ENP/17-4PH
41 A105+Ni60/A105+Ni55/4140+ENP
42 A105+Ni60/A105+Ni60/17-4PH
44 Inconel 625/Inconel 625/Inconel 625
45 316+ENP/316+ENP/F316
46 316+ENP/316+ENP/F316+ENP
47 316+Ni60/316+Ni55/17-4PH
48 316L+Ni60/316L+Ni55/17-4PH
49 316+Ni60/316+Ni55/4140+ENP
50 316L+Ni60/316L+Ni55/4140+ENP
17
FLOATING BALL VALVE
VALVE FIGURE NUMBER (CONT’D) HOW TO ORDER
Operation Mode
J
L e.g.
Nominal Size
A
0 1
Valve Type
B
B A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 1
Trim Material
G
1 0
Seat or Insert
H
R
O-ring
I
0
NPS 1 Class 600 floating ball valve, RF flanged, 2-piece split body, A105 body, SS316 trim, RPTFE seat insert, No O-ring, Lever operated.
H Seat or Seat Insert
X Special
T PTFE
R RPTFE
N Nylon
V Viton
Q TFM
D Devlon
P PEEK
C PCTFE
H HNBR
M Metal
O Molon
E EPDM
L PPL
A Delrin
I O-Ring
0 None
1 Viton
2 Teflon
3 HNBR
4 NBR
5 Special
6 EPDM
7 FVMQ
8 FFKM
9 AFLAS
B Bare Stem
L Lever
G Gearbox
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
S Solid Lever
D Lever with locking device
R Solid lever with locking device
J Operation
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the
left while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If
the specification of the valve is not listed, select the code for “Special “. The total length of the figure number
shall be exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number,
which means eliminating “Specials”. If you don’t have enough specification or information about the valve you
are ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
GATE VALVE
GA-1601B (EN)
MISSION STATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
GATE VALVE
TABLE OF INDEX PAGE
Introduction, Features 3
Scope of Products 4
Overview Gate Valve (Bolted Bonnet) 5
Dimensions and Weights 6
Class 150 (PN 20) 6
Class 300(PN 50) 7
Class 600(PN 100) 8
Class 900(PN 150) 9
Class 1500(PN 250) 10
Overview Gate Valve (Pressure Seal Bonnet) 11
Dimensions and Weights 12
Class 900 (PN 150) 12
Class 1500 (PN 250) 13
Class 2500 (PN 420) 14
Overview Special Type (Extent Bonnet) 15
Valve Figure Number, How To Order 16-18
2
GATE VALVE
This page is intentionally left blank.
3
GATE VALVE
INTRODUCTION FEATURES
INTRODUCTION
FBV cast gate valves are offered by default with flexible
gate, renewable seat, rising stem and non-rising hand
wheel. It plays the role of pipe opening and closing
ultimately through the rotation of the hand wheel to drive
the lifting of gate.
Bolted bonnet, pressure bonnet, bellow seal bonnet,
high/low temperature extended bonnet and ISO 15848
fugitive emission designed valves are available upon
different request of services.
Forged body can also be provided upon special request.
Design of Disc
Cast steel gate valve are made with flexible wedge by
default, solid wedge will be provided only upon request.
Design of Seat
Renewable seat and non-renewable seat are optional,
the default for WCB body is seal welded seat, and body
overlay seat against other valve body material.
Design of Body -Bonnet Connection
Bolted bonnet is normally applied on CL150~CL900, body
seal is defaulted by gasket and RTJ ring. Pressure seal
bonnet is applied on CL1500~CL2500 with pressure seal
ring for body seal.
Design of Packing
By default graphite packing is used, PTFE packing can be
used on corrosive media. API 622 fugitive emission
packing will be used upon request.
Design of Backseat
Renewable back seat is applied on all carbon steel and
low alloy steel valve, however, body back seat is only
applied for stainless steel valve.
Design of Actuation
Hand wheel and gear box are normally designed for cast
gate valve based on different size and pressure rating;
Electric, pneumatic or Chain wheel operation can be
provided upon request.
4
GATE VALVE
SCOPE OF PRODUCTS Gate Valve
Legends:
A –Available in Bolt Bonnet B–Available in Pressure Seal Bonnet
C–Not Usually Required
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
2 50
A A A A, B A, B A, B
2 1/2 65
A A A A, B A, B A, B
3 80
A A A A, B A, B A, B
4 100
A, C A, C A, C A, B,C A, B,C A, B,C
6 150 A A A A, B A, B A, B
8 200 A A A A, B A, B A, B
10 250
A A A A, B A, B A, B
12 300
A A A A, B A, B A, B
14 350
A A A A, B A, B C
16 400
A A A A, B A, B C
18 450 A A A A, B A, B C
20 500 A A A A, B A, B C
22 550
A A A A, B,C A, B,C C
24 600
A A A A, B A, B C
26 650
A A A A, B A, B
28 700
A A A A, B A, B
30 750 A A A A, B A, B
32 800 A A A A, B
34 850
A A A A, B
36 900
A A A A, B
38 950
A, E A, E A A, B
40 1000
A, E A, E A A, B
42 1050 A, E A, E A A, B
48 1200 A, E A, E A A, B
1. The sizes listed above are normal diameters. Contact our sales representative if any other dimensions are requested.
5
GATE VALVE
OVERVIEW (Bolted Bonnet)
Part List
Standards
Design & Manufacture API 600, ASME B16.34, MSS SP-144
Face-to-face ASME B16.10
End Dimension ASME B16.5 (RF, RTJ), ASMEB16.47 (RF,RTJ) ASME B16.25 (BW)
Test & Inspection API 598
Typical Materials Body, Bonnet,Disc
(Casting): A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2 (Forging): A105, A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A182 F6a, F304, F304L, F316, F316L, F51, F53,F55 Monel, Inconel, Hastelloy
9
10
11
5
2
3
4
6
7
8
1
12
13 14 15
16
23 26
24
22
21
20
19
18 17
25
Body 1
Wedge 2
Seat 3
Stem 4
Stud 5
Nut 6
Gasket 7
Bonnet 8
Packing 10
Gland 11
Eye Bolt 13
Nut 14
Pin 15
Stem Nut
16
Handwheel Nut 17
Handwheel 19
Bearing Nut 20
Lubricating Nipple
21
Bearing 22
Stud 23
Gear 25
Nut 24 Screw 18 Gland Flange 12
Backseat 9
Octagonal Ring 26
6
GATE VALVE
-
ASME CLASS 150 (PN 20)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
2 51
7 178
7.5 191
8.5 216
15.87 403
7.87 200
40/33 18/15
2 ½ 65
2.5 64
7.5 190
8 203
9.5 241
18.9 480
7.87 200
55/40 25/18
3 80
3 76
8 203
8.5 216
11.12 283
20.12 511
9.84 250
70/57 32/26
4 100
4 100
9 229
9.5 242
12 305
23.7 602
11 280
110/90 50/41
5 125
5 125
10 254
10.5 267
15 381
30.91 785
11.81 300
143/130 65/59
6 150
6 150
10.5 267
11 280
15.88 403
34.84 885
11.81 300
170/152 77/69
8 200
8 203
11.5 292
12 305
16.5 419
38.5 978
13.78 350
267/238 121/108
10 250
10 250
13 330
13.5 343
18 457
46.93 1192
15.75 400
392/344 178/156
12 300
12 305
14 356
14.5 369
19.75 502
55 1397
17.72 450
584/546 265/248
14 350
14 337
15 381
15.5 394
22.5 572
62.32 1583
19.69 500
800/727 363/330
16 400
15.24 387
16 406
16.5 419
24 610
67.76 1721
23.62 600
1020/934 463/424
18 450
17.24 438
17 432
17.5 445
26 660
76.77 1950
26.77 680
1368/1293 621/587
20 500
19.25 489
18 457
18.5 470
28 711
85.35 2168
28.35 720
1744/1656 792/752
22 550
21.26 540
20 508
20.5 521
30 762
92.52 2350
29.53 750
2313/2093 1050/950
24 600
23.27 591
20 508
20.5 521
32 813
105 2668
29.53 750
2621/2520 1190/1144
26 650
25.24 641
22 559
- 34 864
- - 3350/3458 1521/1570
28 700
27.24 692
24 610
- 36 914
- - 4048/4185 1838/1900
30 750
29.25 743
24 610
- 36 914
- - 24980/6608 261/3000
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet ) ASME CLASS 150 (PN 20)
7
GATE VALVE
-
ASME CLASS 300 (PN 50)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
2 51
8.5 216
9.13 232
8.5 216
17.05 433
7.87 200
51/37 23/17
2 ½ 65
2.5 64
9.5 241
10.12 257
9.5 241
18.54 471
7.87 200
77/57 35/26
3 80
3 76
11.1 282
11.73 298
11.1 282
21.06 535
9.84 250
110/86 50/39
4 100
4 100
12 305
12.64 321
12 305
24.7 627
11 280
156/117 71/53
5 125
5 125
15 381
15.63 397
15 381
28.15 715
11.81 300
256/200 116/91
6 150
6 150
15.87 403
16.5 419
15.87 403
32.44 824
13.78 350
317/249 144/113
8 200
8 203
16.5 419
17.13 435
16.5 419
39.53 1004
15.75 400
460/361 209/164
10 250
10 250
18 457
18.62 473
18 457
49.61 1260
17.72 450
709/564 322/256
12 300
12 305
19.76 502
20.39 518
19.76 502
58.27 1480
19.7 500
1062/859 482/390
14 350
14 337
30 762
30.63 778
30 762
63.19 1605
- 1504/1244 683/565
16 400
15.24 387
33 838
33.62 854
33 838
71.06 1805
- 2093/1773 950/805
18 450
17 432
36 914
36.61 930
36 914
78.54 1995
- 2522/2126 1145/965
20 500
19 483
39 991
39.76 1010
39 991
94.69 2405
- 3601/3106 1635/1410
22 550
21.8 553
43 1092
43.86 1114
43 1092
100.4 2550
- 5176/4626 2350/2100
24 600
23 584
45 1143
45.87 1165
45 1143
104.33 2650
- 5859/5077 2660/2305
26 650
25 635
49 1245
50 1270
49 1245
116.14 2950
- 6806/5595 3090/2540
28 700
27 686
53 1346
54 1371
53 1346
122.05 3100
- 7291/6002 3310/2725
30 750
29 736
55 1397
56 1422
55 1397
126 3200
- 7919/6729 3595/3055
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet ) ASME CLASS 300 (PN 50)
8
GATE VALVE
-
ASME CLASS 600 (PN 100)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
2 51
11.5 292
11.63 295
11.5 292
16.5 418
441 200
79/64 36/29
2 ½ 65
2.5 64
13 330
13.13 333
13 330
18.75 476
551 250
115/93 52/42
3 80
3 76
14 356
14.13 359
14 356
20.38 518
617 280
148/117 67/53
4 100
4 100
17 432
17.13 435
17 432
25.5 646
661 300
247/183 112/83
5 125
5 125
20 508
2012 511
20 508
29.5 750
881 400
330/267 150/121
6 150
6 150
22 559
22.13 562
22 559
33 840
991 450
374/275 170/125
8 200
7.87 200
26 660
26.13 663
26 660
40.38 1025
1100 500
866/683 393/310
10 250
9.76 248
31 787
31.13 790
31 787
48.38 1230
23.62 600
1344/1040 610/472
12 300
11.73 298
33 838
33.13 841
33 635
57 1450
23.62 600
1960/1608 890/730
14 350
12.87 327
35 889
35.12 891
35 889
62 1575
- 2742/2324 1245/1055
16 400
14.76 375
39 991
39.13 994
39 991
70.62 1795
- 3370/2731 1530/1240
18 450
16.5 419
43 1092
43.13 1095
430 1092
76 1930
- 4317/2786 1960/1625
20 500
18.27 464
47 1194
47.25 1200
47 1194
87 2210
- 5396/4471 2450/2030
22 550
20.12 511
51 1295
51.38 1305
51 1295
97.24 2470
- 6123/4956 2780/2250
24 600
22 559
55 1397
55.38 1407
55 1397
101.5 2580
- 6597/5705 2995/2590
26 650
23.74 603
57 1448
57.5 1461
57 1448
105 2665
- 7654/6289 3475/2855
28 700
25.51 648
61 1549
61.5 1562
61 1594
109.5 2780
- 8205/6751 3725/3065
30 750
27.36 695
65 1651
65.5 1664
65 1651
114 2895
- 8910/7489 4045/3400
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet ) ASME CLASS 600 (PN 100)
9
GATE VALVE
-
ASME CLASS 900 (PN 150)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
1.87 47.5
14.5 368
14.63 371
14.5 368
19.62 498
7.87 200
163/119 74/54
2 ½ 65
2.24 57
16.5 419
16.62 422
16.5 419
21.5 547
9.84 250
222/172 101/78
3 80
2.87 73
15 381
15.13 384
15 381
22.5 573
11.81 300
289/231 131/105
4 100
3.86 98
18 457
18.13 460
18 457
26.62 678
17.72 450
379/297 172/135
5 125
4.76 121
22 559
22.13 562
22 559
35.5 900
19.7 500
615/463 276/210
6 150
5.75 146
24 610
24.13 613
24 610
38.2 970
19.7 500
378/573 335/260
8 200
7.48 190
29 737
29.13 740
29 737
43.5 1103
23.62 600
1410/1134 640/515
10 250
9.37 238
33 838
33.13 841
33 838
53 1345
- 2423/2026 1100/920
12 300
11.1 282
38 965
38.13 968
38 965
60 1525
- 3546/3040 1600/1380
14 350
12.24 311
40.5 1029
40.88 1039
40.5 1029
74.5 1900
- 4956/4427 2250/2010
16 400
14 356
44.5 1130
44.88 1140
44.5 1130
81 2055
- 6278/5650 2850/2565
18 450
15.75 400
48 1219
48.5 1232
48 1219
87 2215
- 6740/5474 3060/2485
20 500
17.52 445
52 1321
52.5 1334
52 1321
101 2565
- 8447/7159 3835/3250
24 600
21 533
61 1549
61.75 1568
61 1549
104 2640
- 10793/8954 4900/4065
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolt Bonnet ) ASME CLASS 900 (PN 150)
10
GATE VALVE
-
ASME CLASS 1500 (PN 250)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
1.87 47.5
14.5 368
14.61 371
14.5 368
24.25 615
10 250
256/231 116/105
2 ½ 65
2.24 57
16.5 419
16.61 422
16.5 419
26 658
12 300
366/330 166/150
3 80
2.76 70
18.5 470
18.62 473
18.5 470
30 760
18 450
460/414 209/188
4 100
3.58 91
21.5 546
21.61 549
21.5 546
34.12 868
20 500
652/584 296/265
5 125
4.73 111
26.5 673
26.61 676
26.5 673
38.4 975
24 600
958/826 435/375
6 150
5.35 136
27.75 705
28 711
27.75 705
39.5 1005
24 600
1123/907 510/412
8 200
7 178
32.75 832
33.15 842
32.75 832
45 1145
- 2026/1586 920/760
10 250
8.74 222
39 991
39.41 1001
39 991
54 1370
- 4207/3610 1910/1640
12 300
10.35 263
44.5 1130
45.12 1146
44.5 1130
61 1650
- 6947/6068 3154/2755
14 350
11.38 289
49.5 1259
50.24 1276
49.5 1259
74.88 1900
- 9031/7048 4100/3200
16 400
13 330
54.5 1384
55.35 1406
54.5 1384
80.5 2050
- 13656/11674 6200/5300
18 450
14.61 371
60.5 1537
61.38 1559
60.5 1537
93.75 2350
- 19747/17775 8965/8070
20 500
16.38 416
65.5 1664
66.38 1686
65.5 1664
101.5 2580
- 28855/25969 13100/11790
24 600
19.61 498
76.5 1943
77.6 1971
76.5 1943
114.75 2915
- 34934/31443 15860/14275
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet) ASME CLASS 1500 (PN 250)
11
GATE VALVE
OVERVIEW (Pressure Seal Bonnet)
Part List
Standards
Design & Manufacture ASME B16.34, MSS SP-144
Face-to-face ASME B16.10
End Dimension ASME B16.5(RF, RTJ) ASMEB16.47(RF,RTJ) ASME B16.25 (BW)
Test & Inspection API 598, ASME B16.34
Typical Materials Body, Bonnet,Disc
(Casting) A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2 (Forging) A105, A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A182 F6a, F304, F304L, F316, F316L, F51, F53,F55 Monel, Inconel, Hastelloy
9
10 11
5
2
3
4
6
7
8
1
12
13 14
15
16
17
Body 1
Seat 2
Wedge 3
Stem 4
Bonnet 5
Seal ring 6
Push ring 7
Split ring 8
Stud 10
Nut 11
Gear 13
Bolt 14
Gland flange 15
Gland
16 Yoke 12
Push Plate 9
12
GATE VALVE
-
ASME CLASS 900 (PN 150)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
1.87 47.5
14.5 368
14.63 371
8.5 216
19.62 498
7.87 200
163/119 74/54
2 ½ 65
2.24 57
16.5 419
16.62 422
10 254
21.5 547
9.84 250
222/172 101/78
3 80
2.87 73
15 381
15.13 384
12 305
22.5 573
11.81 300
289/231 131/105
4 100
3.86 98
18 457
18.13 460
14 356
26.62 678
17.72 450
379/297 172/135
5 125
4.76 121
22 559
22.13 562
17 432
35.5 900
19.7 500
615/463 276/210
6 150
5.75 146
24 610
24.13 613
20 508
38.2 970
19.7 500
378/573 335/260
8 200
7.48 190
29 737
29.13 740
26 660
43.5 1103
23.62 600
1410/1134 640/515
10 250
9.37 238
33 838
33.13 841
31 787
53 1345
- 2423/2026 1100/920
12 300
11.1 282
38 965
38.13 968
36 914
60 1525
- 3546/3040 1600/1380
14 350
12.24 311
40.5 1029
40.88 1038
39 991
74.5 1900
- 4956/4427 2250/2010
16 400
14 356
44.5 1130
44.88 1140
43 1092
81 2055
- 6278/5650 2850/2565
18 450
15.75 400
48 1219
48.5 1232 -
87 2215
- 6740/5474 3060/2485
20 500
17.52 445
52 1321
52.5 1334 -
101 2565
- 8447/7159 3835/3250
24 600
21 533
61 1549
61.75 1568 -
104 2640
- 10793/8954 4900/4065
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Pressure Seal Bonnet) ASME CLASS 900 (PN 150)
13
GATE VALVE
-
ASME CLASS 1500 (PN 250)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
2 50
1.87 47.5
14.5 368
14.61 371
8.5 216
24.25 615
10 250
256/231 116/105
2 ½ 65
2.24 57
16.5 419
16.61 422
10 254
26 658
12 300
366/330 166/150
3 80
2.76 70
18.5 470
18.62 473
12 305
30 760
18 450
460/414 209/188
4 100
3.58 91
21.5 546
21.61 549
16 406
34.12 868
20 500
652/584 296/265
5 125
4.73 111
26.5 673
26.61 676
19 483
38.4 975
24 600
958/826 435/375
6 150
5.35 136
27.75 705
28 711
22 559
39.5 1005
24 600
1123/907 510/412
8 200
7 178
32.75 832
33.15 842
28 711
45 1145
- 2026/1586 920/760
10 250
8.74 222
39 991
39.41 1001
34 864
54 1370
- 4207/3610 1910/1640
12 300
10.35 263
44.5 1130
45.12 1146
39 991
61 1650
- 6947/6068 3154/2755
14 350
11.38 289
49.5 1259
50.24 1276
42 1067
74.88 1900
- 9031/7048 4100/3200
16 400
13 330
54.5 1384
55.35 1406
47 1194
80.5 2050
- 13656/11674 6200/5300
18 450
14.61 371
60.5 1537
61.38 1559
53 1346
93.75 2350
- 19747/17775 8965/8070
20 500
16.38 416
65.5 1664
66.38 1686
58 1473
101.5 2580
- 28855/25969 13100/11790
24 600
19.61 498
76.5 1943
77.6 1971
- 114.75 2915
- 34934/31443 15860/14275
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Pressure Seal Bonnet) ASME CLASS 1500 (PN 250)
14
GATE VALVE
-
ASME CLASS 2500 (PN 420)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
2 50
1.5 38
17.75 451
17.88 454
11 279
23.38 595
13.78 350
253/143 115/65
2 ½ 65
1.89 48
20.32 508
20.56 514
13 330
25.6 650
17.72 450
300/172 136/78
3 80
2.24 57
22.75 578
23 584
14.5 368
28 710
17.72 450
540/385 245/175
4 100
2.87 73
26.5 673
26.88 683
18 457
32.25 820
19.69 500
1079/826 490/375
5 125
3.62 92
31.26 794
31.77 807
521 33
43.3 1100
23.62 600
1476/974 670/430
6 150
4.37 111
36 914
36.5 927
24 610
49.62 1260
23.62 600
1894/1278 860/580
8 200
5.75 146
40.25 1022
40.88 1038
30 762
63.4 1610
- 5396/4405 2450/2010
10 250
7.27 184
50 1270
50.88 1292
36 914
81.7 2076
- 10066/8370 4570/3800
12 300
8.62 219
56 1422
56.88 1444
41 1041
89.8 2281
- 13436/11454 6100/5200
14 350
9.49 241
- - 44 1118
74.88 1900
- -
16 400
10.87 276
- - 49 1245
80.5 2050
- -
18 450
12.24 311
- - 55 1397
93.75 2350
- -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Pressure Seal Bonnet) ASME CLASS 2500 (PN 420)
15
GATE VALVE
OVERVIEW (Special Type Cast Steel Gate Valve)
-
Low Temperature Extension High Temperature Extension Bellow Seal Extension
Structure characteristics: 1. The bonnet are extended for low temperature
service, the packing position are raised to avoid the freeze of packing which will affect packing sealing performance;
2. The gate valve shall have relief hole on upstream direction while the pressure may remain in the cavity;
3. Low temperature cold isolation can be an option to prevent cold heat exchange.
Structure characteristics: 1. The high temperature extended structure is
mainly to prevent scald operator during operation.
2. The cooling fin can be selected to help heat radiation.
Structure characteristics: 1. Bellow seal extension has the bellow inside of the cavity, the effective compression of the bellows must be greater than the opening stroke of the valve; 2. Bellow seal structure can effectively reduce the leakage of valve stem, the primary seal is for bellows and secondary seal as a filler.
16
GATE VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
H e.g.
Nominal Size
A
0 6
Valve Type
B
G A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
0 5
Seat
H
R
O-ring
I
0
NPS 6 Class 600,Gate Valve, Flexible wedge, bolt bonnet , Raised Face, WCB body, Trim 5#, Renewable Seat, No O-ring, Handwheel Operated.
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125(PN16)
4 Class 400(PN64)
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
Valve Type B
GA Gate Valve
G Trim Material
00 Special
01 13Cr/13Cr/13Cr
02 304/304/304
03 310/310/310
04 Hard 13Cr/Hard 13Cr/13Cr
05 Stellite /Stellite/13Cr
06 13Cr/Cu-Ni/13Cr
07 13Cr/Hard 13Cr /13Cr
08 13Cr/Stellite /13Cr
09 Monel/Monel /Monel
10 316/316/316
11 Monel/Stellite/Monel
12 316/Stellite/316
13 Alloy 20/Alloy 20 /Alloy 20
14 Alloy 20/Stellite /Alloy 20
15 Stellite /Stellite /304
16 Stellite /Stellite /316
17 Stellite /Stellite /347
18 Stellite /Stellite /Alloy 20
20 304L /304L /304L
21 316L /316L /316L
22 321 /321 /321
23 F55 /F55/F55
24 F51/F51 /F51
25 F53 /F53 /F53
32 316L /Stellite /316L
33 Stellite /Stellite /316L
34 304L /Stellite /304L
35 Stellite /Stellite /304L
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
E Construction
1 Flexible wedge, Bolted Bonnet
GA
2 Flexible wedge, Welded Bonnet
3 Flexible wedge, Pressure Seal
4 Flexible wedge, Bellow Seal
5 Solid wedge, Bolted Bonnet
6 Solid wedge, Welded Bonnet
7 Solid wedge, Pressure Seal
8 Solid wedge, Bellow Seal
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 C F8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
17
GATE VALVE
VALVE FIGURE NUMBER (CONT’D) HOW TO ORDER
Operation Mode
J
H e.g.
Nominal Size
A
0 6
Valve Type
B
G A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
0 5
Seat
H
R
O-ring
I
0
NPS 6 Class 600,Gate Valve, Flexible wedge, bolt bonnet , Raised Face, WCB body, Trim 5#, Renewable Seat, No O-ring, Handwheel Operated.
I O-Ring
O None
H Seat
R Renewable Metal
N Non Renewable Metal
B Bare Stem
H Handwheel
G Gear
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
O Solid Handwheel
V Handwheel with locking device
J Operation
18
GATE VALVE
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left
while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the
specification of the valve is not listed, select the code for “Special “. The total length of the figure number shall be
exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which
means eliminating “Specials”. If you don’t have enough specification or information about the valve you are
ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
GLOBE VALVE
GL-1601C (EN)
MISSIONSTATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
GLOBE VALVE
TABLE OF INDEX PAGE
Introduction, Features 3
Scope of Products 4
Overview Globe Valve (Bolted Bonnet) 5
Dimensions and Weights 6
Class 150 (PN 20) 6
Class 300(PN 50) 7
Class 600(PN 100) 8
Class 900(PN 150) 9
Class 1500(PN 250) 10
Overview Globe Valve (Pressure Seal Bonnet) 11
Dimensions and Weights 12
Class 900 (PN 150) 12
Class 1500 (PN 150) 13
Class 2500 (PN 250) 14
Valve Figure Number, How To Order 15-16
2
GLOBE VALVE
This page is intentionally left blank.
3
GLOBE VALVE
INTRODUCTION FEATURES
INTRODUCTION
FBV cast globe valve offers T type body by default with
rising stem and hand wheel. It blocks the flow of pipeline
through the rotation and lifting of hand wheel as well as
stem to drive the lift of disc. The globe valve has the
feature of long service lift since there is no relative
friction between disc and body sealing surface.
Bolted bonnet, pressure bonnet, bellow seal bonnet,
high/low temperature extended bonnet and ISO 15848
fugitive emission designed valves are available upon
different request of services.
Forged body can also be provided upon special
request. Design of Disc
Single disc is normally adopted on cast globe valve, the
medium flows from the bottom to the top; double disc is
just applied while larger pressure difference or bigger
size of valve, the medium flows from top to the bottom.
Plug type disc can be provided upon request.
Design of Seat
FBV cast globe valve is defaulted by non-renewable body
seat, renewable seat is provided upon request only.
Design of Body -Bonnet Connection
Bolted bonnet is normally applied on CL150~CL900,
body seal is defaulted by gasket and RTJ ring; Pressure
seal bonnet is applied on CL1500~CL2500 with pressure
seal ring for body seal.
;
Design of Packing
By default graphite packing is used, PTFE packing can be
used on corrosive media. API 622 fugitive emission
packing will be used upon request.
Design of Backseat
Renewable back seat is applied on all carbon steel and
low alloy steel valve, however, body back seat is only
applied for stainless steel valve.
Design of Actuation
Hand wheel and gear box are normally designed for cast
globe valve based on different size and pressure rating;
Electric, pneumatic or Chain wheel operation can be
provided upon request.
4
GLOBE VALVE
SCOPE OF PRODUCTS Globe Valve
Legends:
A –Available in Bolt Bonnet B–Available in Pressure Seal Bonnet
C–Not Usually Required
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
2 50
A A A A, B A, B A, B
2 1/2 65
A A A A, B A, B A, B
3 80
A A A A, B A, B A, B
4 100
A, A, A, A, B A, B A, B
6 150 A A A A, B A, B A, B
8 200 A A A A, B A, B A, B
10 250
A A A A, B A, B A, B
12 300
A A A A, B A, B A, B
14 350
A A A A, B A, B
16 400
A A A A, B A, B
18 450 A A A A, B
20 500 A A A A, B
22 550
A A
24 600
A A
1.The sizes listed above are normal diameters. Contact our sales representative if any other dimensions are requested.
5
GLOBE VALVE
OVERVIEW (Bolted Bonnet)
Single disc Type Double disc Type Part List
Standards
Design & Manufacture BS 1873, API 623, ASME B16.34
Face-to-face ASME B16.10
End Dimension ASME B16.5 (RF, RTJ), ASMEB16.47(RF,RTJ) ASME B16.25 (BW)
Test & Inspection API 598
Typical Materials Body, Bonnet,Disc
(Casting): A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2 (Forging): A105, A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A182 F6a, F304, F304L, F316, F316L, F51, F53,F55 Monel, Inconel, Hastelloy
9
10
11
5
2
3
4
6
7
8
1
12
13 14 15
16
21
24
22
20
18
23
Body 1
Disc 2
Stem 3
Sleeve 4
Stud 5
Gasket 7
Bonnet 8
Packing 10
Gland 11
Eye Bolt 13
Nut 14
Pin 15
Stem Nut
16
Handwheel Nut 17
Washer 19
Handwheel 20
Rivet
21
Nameplate 22
Gear 23
Octagonal Ring
24 Nut 18 Gland Flange 12
Backseat 9
17
19
Nut
6
6
GLOBE VALVE
-
ASME CLASS 150 (PN 20)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
2 51
8 203
8.5 216
8 203
14.3 363
7.87 200
37/34 17/15.5
2 ½ 65
2.5 64
8.5 216
9 229
8.5 216
15.55 395
9.84 250
53/48 24/22
3 80
3 76
9.5 241
10 254
9.5 241
16.65 423
9.84 250
75/68 34/31
4 100
4 100
11.5 292
12 305
11.5 292
19 483
11.81 300
104/95 47/43
5 125
5 125
14 356
14.53 369
14 356
20.67 525
15.75 400
154/141 70/64
6 150
6 150
16 406
16.5 419
16 406
22.52 572
15.75 400
187/172 85/78
8 200
8 203
19.5 495
20 508
19.5 495
26.65 677
17.72 450
275/220 125/110
10 250
10 250
24.5 622
25 635
24.5 622
32.87 835
19.69 500
557/524 253/238
12 300
12 305
27.5 698
28 711
27.5 698
39.17 995
23.62 600
802/753 364/342
14 350
14 337
31 787
31.5 800
31 787
40.16 1020
- 1123/1048 510/476
16 400
15.24 387
36 914
36.5 927
36 914
41.34 1050
- 1630/1487 740/675
18 450
17.24 438
38.5 978
39 991
38.5 978
50.6 1285
- 1773/1652 805/750
20 500
19.25 489
38.5 978
39 991
38.5 978
58.27 1480
- 1872/1729 850/785
24 600
23.27 591
51 1295
51.5 1308
51 1295
68.11 1730
- 2709/2434 1230/1105
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet) ASME CLASS 150 (PN 20)
7
GLOBE VALVE
-
ASME CLASS 300 (PN 50)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
2 51
10.5 267
11.14 283
10.5 267
14.72 374
7.87 200
64/57 29/26
2 ½ 65
2.5 64
11.5 292
12.13 308
11.5 292
15.55 395
9.84 250
84/68 35/31
3 80
3 76
12.5 318
13.15 334
12.5 318
17.76 451
11.81 300
104/90 47/41
4 100
4 100
14 356
14.65 372
14 356
20.16 512
13.78 350
123/112 56/51
5 125
5 125
15.75 400
16.38 416
15.75 400
21.26 540
13.78 350
148/130 67/59
6 150
6 150
17.5 444
18.11 460
17.5 444
25 635
17.72 450
278/253 126/115
8 200
8 203
22 559
22.64 575
22 559
26.85 682
19.7 500
529/474 240/215
10 250
10 250
24.5 622
25.12 638
24.5 622
32.87 835
19.7 500
1233/1167 560/530
12 300
12 305
28 711
28.62 727
28 711
33.66 855
19.7 500
1586/1482 720/673
14 350
14 337
33 838
33.62 854
33 838
37.4 950
- -
16 400
15.24 387
34 864
34.65 880
34 864
43.3 1100
- -
18 450
17 432
38.5 978
39.13 994
38.5 978
45.28 1150
- -
20 500
19 483
40 1016
40.75 1035
40 1016
47.24 1200
- -
24 600
23 584
53 1346
53.86 1368
53 1346
51.18 1300
- -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet) ASME CLASS 300 (PN 50)
8
GLOBE VALVE
-
ASME CLASS 600 (PN 100)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
2 51
11.5 292
11.63 295
11.5 292
15.16 385
441 200
75/66 34/30
2 ½ 65
2.5 64
13 330
13.13 333
13 330
16.93 430
551 250
99/88 50/45
3 80
3 76
14 356
14.13 359
14 356
18.7 475
617 280
152/137 69/62
4 100
4 100
17 432
17.13 435
17 432
26.97 685
661 300
286/267 130/121
5 125
5 125
20 508
2012 511
20 508
30.31 770
881 400
419/385 190/175
6 150
6 150
22 559
22.13 562
22 559
35.43 900
991 450
551/518 250/235
8 200
7.87 200
26 660
26.13 663
26 660
35.94 913
1100 500
1002/947 455/430
10 250
9.76 248
31 787
31.13 790
31 787
41.73 1060
23.62 600
1806/1692 820/768
12 300
11.73 298
33 838
33.13 841
33 635
48.23 1225
14 350
12.87 327
35 889
35.12 891
35 889
52.28 1328
-
16 400
14.76 375
39 991
39.13 994
39 991
61 1550
-
18 450
16.5 419
43 1092
43.13 1095
430 1092
66.93 1700
-
20 500
18.27 464
47 1194
47.25 1200
47 1194
70.87 1800
-
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet) ASME CLASS 600 (PN 100)
9
GLOBE VALVE
-
ASME CLASS 900 (PN 150)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
1.87 47.5
14.5 368
14.63 371
14.5 368
17.5 445
9.84 250
152/143 69/65
2 ½ 65
2.24 57
16.5 419
16.62 422
16.5 419
19.5 502
11.81 300
231/216 105/98
3 80
2.87 73
15 381
15.13 384
15 381
21 533
13.78 350
238/220 108/100
4 100
3.86 98
18 457
18.13 460
18 457
24.5 622
15.75 400
352/319 160/145
5 125
4.76 121
22 559
22.13 562
22 559
27.16 690
17.72 450
617/562 280/255
6 150
5.75 146
24 610
24.13 613
24 610
29.5 750
19.7 500
771/711 350/323
8 200
7.48 190
29 737
29.13 740
29 737
36.5 927
19.7 500
1564/1487 710/675
10 250
9.37 238
33 838
33.13 841
33 838
44.88 1140
-
12 300
11.1 282
38 965
38.13 968
38 965
53.12 1350
-
14 350
12.24 311
40.5 1029
40.88 1039
40.5 1029
55.12 1400 -
16 400
14 356
44.5 1130
44.88 1140
44.5 1130
63 1600 -
18 450
15.75 400
48 1219
48.5 1232
48 1219
68.9 1750 -
20 500
17.52 445
52 1321
52.5 1334
52 1321
72.83 1850 -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet) ASME CLASS 900 (PN 150)
10
GLOBE VALVE
-
ASME CLASS 1500 (PN 250)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
1.87 47.5
14.5 368
14.61 371
14.5 368
16.93 430
11.81 300
161/150 73/68
2 ½ 65
2.24 57
16.5 419
16.61 422
16.5 419
19.69 500
13.78 350
253/231 115/105
3 80
2.76 70
18.5 470
18.62 473
18.5 470
29.53 750
15.75 400
324/291 147/132
4 100
3.58 91
21.5 546
21.61 549
21.5 546
32.28 820
17.72 450
436/319 198/182
5 125
4.73 111
26.5 673
26.61 676
26.5 673
34.65 880
19.7 500
771/731 350/332
6 150
5.35 136
27.75 705
28 711
27.75 705
35.83 910
23.6 600
1123/1068 510/485
8 200
7 178
32.75 832
33.15 842
32.75 832
39.96 1015
- -
10 250
8.74 222
39 991
39.41 1001
39 991
40.75 1035
- -
12 300
10.35 263
44.5 1130
45.12 1146
44.5 1130
53.15 1350
- -
14 350
11.38 289
49.5 1259
50.24 1276
49.5 1259
57.48 1460
- -
16 400
13 330
54.5 1384
55.35 1406
54.5 1384
61 1550
- -
18 450
14.61 371
60.5 1537
61.38 1559
60.5 1537
64.57 1640
- -
20 500
16.38 416
65.5 1664
66.38 1686
65.5 1664
66.93 1700
- -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Bolted Bonnet) ASME CLASS 1500 (PN 250)
11
GLOBE VALVE
OVERVIEW (Pressure Seal Bonnet)
Single Disc Type Double Disc Type Part List
Standards
Design & Manufacture ASME B16.34, MSS SP-144
Face-to-face ASME B16.10
End Dimension ASME B16.5(RF, RTJ) ASMEB16.47(RF,RTJ) ASME B16.25 (BW)
Test & Inspection API 598, ASME B16.34
Typical Materials Body, Bonnet,Disc
(Casting) A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2 (Forging) A105, A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A182 F6a, F304, F304L, F316, F316L, F51, F53,F55, Monel, Inconel, Hastelloy
9
10 11
2
3
4
6
7
8
1
12
15
Body 1
Disc 2
Disc Nut 3
Stem 4
Bonnet 5
Seal ring 6
Split ring
7
Split ring 8
Stud 10
Nut 11 Stem Nut 16
Handwheel Nut 17
Handwheel 18
Bear Gland
19
Packing 12
Yoke 9
13 14
16 17
18
29
20
21
22
23 24
Gland 13
Gland flange
14
Fixture Block 15 Grease Nipple Nut 20
6
Bear 21
Gear 22
Eyes Bolt 23
Nut
24
12
GLOBE VALVE
-
ASME CLASS 900 (PN 150)
Size in/mm
D L
H W Weight
RF RTJ BW RF/BW (lb/kg)
2 50
1.87 47.5
14.5 368
14.63 371
8.5 216
17.5 445
9.84 250
152/143 69/65
2 ½ 65
2.24 57
16.5 419
16.62 422
10 254
19.5 502
11.81 300
231/216 105/98
3 80
2.87 73
15 381
15.13 384
12 305
21 533
13.78 350
238/220 108/100
4 100
3.86 98
18 457
18.13 460
14 356
24.5 622
15.75 400
352/319 160/145
5 125
4.76 121
22 559
22.13 562
17 432
27.16 690
17.72 450
617/562 280/255
6 150
5.75 146
24 610
24.13 613
20 508
29.5 750
19.7 500
771/711 350/323
8 200
7.48 190
29 737
29.13 740
26 660
36.5 927
19.7 500
1564/1487 710/675
10 250
9.37 238
33 838
33.13 841
31 787
44.88 1140 -
12 300
11.1 282
38 965
38.13 968
36 914
53.12 1350
-
14 350
12.24 311
40.5 1029
40.88 1038
39 991
55.12 1400
-
16 400
14 356
44.5 1130
44.88 1140
43 1092
63 1600
-
18 450
15.75 400
48 1219
48.5 1232 - 68.9
1750 -
20 500
17.52 445
52 1321
52.5 1334 - 72.83
1850 -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Pressure Seal Bonnet) ASME CLASS 900 (PN 150)
13
GLOBE VALVE
-
ASME CLASS 1500 (PN 250)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
2 50
1.87 47.5
14.5 368
14.61 371
8.5 216
16.93 430
11.81 300
161/150 73/68
2 ½ 65
2.24 57
16.5 419
16.61 422
10 254
19.69 500
13.78 350
253/231 115/105
3 80
2.76 70
18.5 470
18.62 473
12 305
29.53 750
15.75 400
324/291 147/132
4 100
3.58 91
21.5 546
21.61 549
16 406
32.28 820
17.72 450
436/319 198/182
5 125
4.73 111
26.5 673
26.61 676
19 483
34.65 880
19.7 500
771/731 350/332
6 150
5.35 136
27.75 705
28 711
22 559
35.83 910
23.6 600
1123/1068 510/485
8 200
7 178
32.75 832
33.15 842
28 711
39.96 1015
- -
10 250
8.74 222
39 991
39.41 1001
34 864
40.75 1035
- -
12 300
10.35 263
44.5 1130
45.12 1146
39 991
53.15 1350
- -
14 350
11.38 289
49.5 1259
50.24 1276
42 1067
57.48 1460
- -
16 400
13 330
54.5 1384
55.35 1406
47 1194
61 1550
- -
18 450
14.61 371
60.5 1537
61.38 1559
53 1346
64.57 1640
- -
20 500
16.38 416
65.5 1664
66.38 1686
58 1473
66.93 1700
- -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Pressure Seal Bonnet) ASME CLASS 1500 (PN 250)
14
GLOBE VALVE
-
ASME CLASS 2500 (PN 420)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
2 50
1.5 38
17.75 451
17.88 454
11 279
19.5 495
13.78 350
258/163 117/74
2 ½ 65
1.89 48
20.32 508
20.56 514
13 330
21.65 550
17.72 450
341/286 155/130
3 80
2.24 57
22.75 578
23 584
14.5 368
23.74 603
17.72 450
430/251 195/114
4 100
2.87 73
26.5 673
26.88 683
18 457
26.97 685
19.69 500
573/441 260/200
5 125
3.62 92
31.26 794
31.77 807
521 33
33.46 850
23.62 600
1674/1167 760/530
6 150
4.37 111
36 914
36.5 927
24 610
38.23 971
23.62 600
2737/1689 1238/767
8 200
5.75 146
40.25 1022
40.88 1038
30 762
43.31 1100
- -
10 250
7.27 184
50 1270
50.88 1292
36 914
47.24 1200
- -
12 300
8.62 219
56 1422
56.88 1444
41 1041
60 1524
- -
The dimension and weights are for reference only and subject to change without notice. 1. For more dimensional information, please contact our sales representative. 2. “W” on above schematic is the diameter for hand wheel, the one without dimension on the table above is defaulted by gear operation.
DIMENSIONS AND WEIGHTS (Pressure Seal Bonnet) ASME CLASS 2500 (PN 420)
15
GLOBE VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
G e.g.
Nominal Size
A
0 8
Valve Type
B
G L
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
0 5
Seat
H
N
O-ring
I
0
NPS 8 Class 600,Globe Valve, Straight pattern, Bolt bonnet, Raised Face, WCB body, Trim 5#, Non Renewable Seat, No O-ring, Gear Operated.
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125(PN16)
4 Class 400(PN64)
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
Valve Type B
GL Globe Valve
G Trim Material
00 Special
01 13Cr/13Cr/13Cr
02 304/304/304
03 310/310/310
04 Hard 13Cr/Hard 13Cr/13Cr
05 Stellite /Stellite/13Cr
06 13Cr/Cu-Ni/13Cr
07 13Cr/Hard 13Cr /13Cr
08 13Cr/Stellite /13Cr
09 Monel/Monel /Monel
10 316/316/316
11 Monel/Stellite/Monel
12 316/Stellite/316
13 Alloy 20/Alloy 20 /Alloy 20
14 Alloy 20/Stellite /Alloy 20
15 Stellite /Stellite /304
16 Stellite /Stellite /316
17 Stellite /Stellite /347
18 Stellite /Stellite /Alloy 20
20 304L /304L /304L
21 316L /316L /316L
22 321 /321 /321
23 F55 /F55/F55
24 F51/F51 /F51
25 F53 /F53 /F53
32 316L /Stellite /316L
33 Stellite /Stellite /316L
34 304L /Stellite /304L
35 Stellite /Stellite /304L
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
E Construction
1 Straight pattern, Bolt bonnet GL
2 Straight pattern, Welded Bonnet
3 Straight pattern, Pressure Seal
4 Y- pattern, Bolt bonnet 5 Y- pattern, Welded Bonnet
6 Y- pattern, Pressure Seal
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 CF8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
16
GLOBE VALVE
VALVE FIGURE NUMBER(CONT’D) HOW TO ORDER
Operation Mode
J
H e.g.
Nominal Size
A
0 6
Valve Type
B
G A
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
0 5
Seat
H
R
O-ring
I
0
NPS 8 Class 600,Globe Valve, Straight pattern, Bolt bonnet, Raised Face, WCB body, Trim 5#, Non Renewable Seat, No O-ring, Gear Operated.
I O-Ring
0 None
H Seat
R Renewable Metal
N Non Renewable Metal
B Bare Stem
H Handwheel
G Gear
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
O Solid Handwheel
V Handwheel with locking device
J Operation
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left
while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the
specification of the valve is not listed, select the code for “Special “. The total length of the figure number shall be
exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which
means eliminating “Specials”. If you don’t have enough specification or information about the valve you are
ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
CHECK VALVE
CH-1601B (EN)
MISSION STATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customers and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
CHECK VALVE
TABLE OF INDEX PAGE
Introduction, Features 3
Scope of Products, 4
Overview Swing Type 5
Dimensions and Weights, Swing Type, (Bolt Cover) 6
Class 150 (PN 20) 6
Class 300 (PN 50) 7
Class 600 (PN 100) 8
Class 900 (PN 150) 9
Class 1500 (PN 250) 10
Dimensions and Weights, Swing Type, (Pressure Seal Cover) 11
Class 1500/2500 (PN 250/420) 11
Overview Dual Plate Type 12
Dimensions and Weights 13
Class 150/300 (PN 20/50) 13
Class 600/900 (PN 100/150) 14
Class 1500/2500 (PN 250/420) 15
Valve Figure Number, How To Order 16-17
2
CHECK VALVE
This page is intentionally left blank.
3
CHECK VALVE
INTRODUCTION FEATURES
INTRODUCTION
Check valve is installed on the pipeline to prevent the
media reverse flow and ensure one-way flow of media
channels only.
Dual Wafer Check Valve
Dual wafer check valve has dual disc. Under the force of
medium, the disc is rotated around the same shaft pin,
and it closes automatically with the force of spring while
the medium stops flow.
FBV dual wafer check valve offers easy assembly and
maintenance as well as quick open and close. Single disc
wafer, dual wafer, axial flow, quick opening and slow
closing action with damping check are available based
on different request of service.
Swing Check Valve
Swing check valve is provided with single disc. With the
force of medium, the disc will automatically open or close
around the fixed pin shaft. When the media stops the flow,
the disc will be closed under its own force; No manual
intervention is involved in the whole process.
FBV swing check valve offers simple structure, less parts,
convenient maintenance and repair and low failure rate.
The full open disc design is applied to provide a larger
opening flow area after disc opening, small fluid resistance
and large valve flow coefficient.
Counter weight or damp structure can be applied to reduce
the impact of water hammer while disc opening.
4
CHECK VALVE
SCOPE OF PRODUCTS
Legends: A – Swing Type B – Dual Plate Type
C – Lift Type D – Not Usually Required
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
2 50 A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
2 1/2 65
A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
3 80
A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
4 100
A,B,C,D A,B,C,D A,B,C,D A,B,C,D A,B,C,D A,B,C,D
6 150
A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
8 200 A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
10 250 A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
12 300
A,B,C A,B,C A,B,C A,B,C A,B,C A,B,C
14 350
A,B,C A,B,C A,B,C A,B,C
16 400
A,B,C A,B,C A,B,C A,B,C
18 450
A,B,C A,B,C A,B,C A,B
20 500 A,B,C A,B,C A,B,C A,B
22 550 A,B,C,D A,B,C,D A,B,C,D A,B,D
24 600
A,B,C A,B,C A,B,C A,B
26 650
A,B,D A,B,D A,B,D A,B,D
28 700
A,B,D A,B,D A,B,D A,B,D
30 750
A,B,D A,B,D A,B,D
32 800 A,B,D A,B,D A,B,D
34 850 A,B,D A,B,D A,B,D
36 900
A,B,D A,B,D A,B,D
38 950
B,D B,D B,D
40 1000
B,D B,D B,D
42 1050
B,D B,D B,D
48 1200 B,D B,D B,D
56 1400 B,D B,D B,D
60 1500
B,D B,D B,D
1. The sizes listed above are normal diameters. Contact our sales representative if any other dimensions are requested.
5
CHECK VALVE
OVERVIEW (Swing Type)
STANDARDS
Design & Manufacture BS 1868,ASMEB16.34 API 6D
Face-to-face ASME B16.10
End Dimension ASME B16.5 (RF, RTJ), ASME B16.47 (RF,RTJ) MSS SP-44 (NPS 22 Only) ASME B16.25 (BW)
Test & inspection API 598, API 6D, ISO 5208
TYPICAL MATERIALS
Body, Cover, Disc
(Casting)A216 WCB,A217 WC6, WC9, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2, Monel, Inconel, Hastelloy
Seal Surface
13Cr/SS304/SS316/STL, HNBR,FKM
Part List
Typical Check Valve
Bolted Cover Swing Check Valve Pressure Seal Cover Swing Check Valve Bolted Cover Lift Check Valve
1
9
10 11
Body 1
Seat Ring 2
Disc 3
Disc Nut 4
Hinge 5
Pin 6
Screw 7
Gasket 8
Cover 9
Nut 10
Stud 11
5
2
3
4
6
7
8
6
CHECK VALVE
ASME CLASS 150 (PN 20)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
2 51
8 203
8.5 216
8 203
5.5 140
37 17
2 ½ 65
2 ½ 64
8.5 216
9 229
8.5 216
6.3 160
44 20
3 80
3 80
9.5 241
10 254
9.5 241
7.1 180
53 24
4 100
4 102
11.5 292
12 305
11.5 292
8.27 210
84 38
6 150
6 152
14 356
14.5 368
14 356
11.42 290
198 90
8 200
8 203
19.5 495
20 508
19.5 495
14.17 360
286 130
10 250
10 252
24.5 622
25 635
24.5 622
15.75 400
430 195
12 300
12 305
27.48 698
28 711
27.48 698
18.11 460
661 300
14 350
14 337
31 787
31.5 800
31 787
20.47 520
804 365
16 400
15.24 387
34 864
34.5 876
34 864
24.41 620
1178 535
18 450
17.24 438
38.5 978
39 991
38.5 978
27.17 690
1652 750
20 500
19.25 489
38.5 978
39 991
38.5 978
28.35 720
1949 885
24 600
23.22 590
51 1295
51.5 1308
51 1295
29.13 740
2533 1150
28 700
27.24 692
57 1448
- 57 1448
33.46 850
3822 1735
30 750
29.25 743
60 1524
- 60 1524
39.37 1000
4515 2050
36 900
35.23 895
77 1956
- 77 1956
44.88 1140
4626 2100
The dimension and weights are for reference only and subject to change without notice. 1.For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Swing Type) ASME CLASS 150 (PN 20)
7
CHECK VALVE
ASME CLASS 300 (PN 50)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
2 51
10.5 267
11.14 283
10.5 267
6.1 155
51 23
2 ½ 65
2 ½ 64
11.5 292
12.13 308
11.5 292
7.09 180
81 37
3 80
3 80
12.52 318
13.15 334
12.52 318
7.87 200
101 46
4 100
4 102
14 356
14.65 372
14 356
8.66 220
156 71
6 150
6 152
17.5 444
18.11 460
17.5 444
12.4 315
256 116
8 200
8 203
21 533
21.61 549
21 533
15.16 385
445 202
10 250
10 252
24.5 622
25.12 638
24.5 622
16.93 430
652 296
12 300
12 305
28 711
28.62 727
28 711
19.29 490
943 428
14 350
14 337
33 838
33.62 854
33 838
21.65 550
1284 583
16 400
15.24 387
34 864
34.65 880
34 864
24.61 625
1661 754
18 450
17 432
38.5 978
39.13 994
38.5 978
26.38 670
2059 935
20 500
19 483
40 1016
40.75 1035
40 1016
29.13 740
2544 1155
24 600
23 584
53 1346
53.86 1368
53 1346
31.89 810
3101 1408
28 700
27 686
59 1499
60 1524
59 1499
34.25 870
3789 1720
32 800
29 737
62.76 1594
63.74 1619
62.76 1594
38.98 990
4141 1880
36 900
35 889
82 2083
82.64 2099
82 2083
45.67 1160
2846 2200
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Swing Type) ASME CLASS 300 (PN 50)
8
CHECK VALVE
ASME CLASS 600 (PN 100)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
2 51
11.5 292
11.61 295
11.5 292
6.7 170
57 26
2 ½ 65
2 ½ 64
13 330
13.11 333
13 330
7.4 188
70 32
3 80
3 80
14 356
14.13 359
14 356
9.37 238
108 49
4 100
4 102
17 432
17.13 435
17 432
11.42 290
189 86
6 150
6 152
22 559
22.13 562
22 559
14 355
555 252
8 200
7.87 200
26 660
26.10 663
26 660
16.34 415
945 429
10 250
9.76 248
31 787
31.1 790
31 787
18.82 478
1227 557
12 300
11.77 299
33 838
33.11 841
33 838
21.26 540
1467 670
14 350
12.87 327
35 889
35.12 892
35 889
22.83 580
2079 944
16 400
14.76 375
39 991
39.13 994
39 991
26.38 670
2863 1300
18 450
16.5 419
43 1092
43.11 1095
43 1092
30.94 786
3877 1760
20 500
18.27 464
47 1194
47.24 1200
47 1194
33.27 845
4846 2200
24 600
22 559
55 1397
55.39 1407
55 1397
37 940
6308 2864
28 700
25.51 648
63 1600
63.5 1613
63 1600
41.34 1050
7048 3200
32 800
29 737
70 1778
70.63 1794
70 1778
45.67 1160
8238 3740
36 900
32.64 829
82 2083
82.64 2099
82 2083
50 1270
9912 4500
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Swing Type) ASME CLASS 600 (PN 100)
9
CHECK VALVE
ASME CLASS 900 (PN 150)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
1.89 48
14.5 368
14.61 371
14.5 368
7.87 200
121 55
2 ½ 65
2.24 57
16.5 419
16.61 422
16.5 419
10.24 260
165 75
3 80
2.87 73
15 381
15.12 384
15 381
11.22 285
220 100
4 100
3.86 98
18 457
18.11 460
18 457
12.6 320
308 140
6 150
5.75 146
24 610
24.13 613
24 610
16.54 420
643 292
8 200
7.52 191
29 737
29.13 740
29 737
20.47 520
1211 550
10 250
9.37 238
33 838
33.11 841
33 838
21.26 540
1542 700
12 300
11.1 282
38 965
38.11 968
38 965
23.23 590
1905 865
14 350
12.24 311
40.51 1029
40.91 1039
40.51 1029
25.2 640
2753 1250
16 400
14 356
44.5 1130
44.88 1140
44.5 1130
27.56 700
3855 1750
18 450
15.75 400
48 1219
48.5 1232
48 1219
29.53 750
4515 2050
20 500
17.52 445
52 1321
52.52 1334
52 1321
31.89 810
5396 2450
24 600
21 533
61 1549
61.73 1568
61 1549
38.58 980
6057 2750
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Swing Type) ASME CLASS 900 (PN 150)
10
CHECK VALVE
ASME CLASS 1500 (PN 250)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
1.89 48
14.5 368
14.61 371
14.5 368
7.87 200
143 65
2 ½ 65
2.24 57
16.5 419
16.61 422
16.5 419
10.63 270
176 80
3 80
2.76 70
18.5 470
18.62 473
18.5 470
11 280
264 120
4 100
3.58 91
21.5 546
21.61 549
21.5 546
13.78 350
419 190
6 150
5.35 136
27.76 705
28 711
27.76 705
18.5 470
1057 480
8 200
7 178
32.76 832
33.15 842
32.76 832
22.05 560
1674 760
10 250
8.74 222
39 991
39.41 1001
39 991
25.6 650
2313 1050
12 300
10.35 263
44.5 1130
45.12 1146
44.5 1130
28.74 730
3172 1440
14 350
11.38 289
49.5 1257
50.24 1276
49.5 1257
33.07 840
3833 1740
16 400
13 330
54.5 1384
55.35 1406
54.5 1384
37 940
5374 2440
18 450
14.6 371
60.5 1537
61.38 1559
60.5 1537
41.34 1050
7048 3200
20 500
16.38 416
65.5 1664
66.38 1686
65.5 1664
45.67 1160
8370 3800
24 600
19.6 498
76.5 1943
77.6 1971
76.5 1943
50 1270
9471 4300
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Swing Type) ASME CLASS 1500 (PN 250)
11
CHECK VALVE
ASME CLASS 1500 (PN 250)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
1.89 48
14.5 368
14.61 371
8.5 216
9.65 245
62 28
2 ½ 65
2.24 57
16.5 419
16.61 422
10 254
10.24 260
79 36
3 80
2.76 70
18.5 470
18.62 473
12 305
11.81 300
110 50
4 100
3.58 91
21.5 546
21.61 549
16 406
13.39 340
176 80
6 150
5.35 136
27.76 705
28 711
19 483
16.93 430
639 290
8 200
7 178
32.76 832
33.15 842
28 711
20.87 530
1079 490
10 250
8.74 222
39 991
39.41 1001
34 864
22.44 570
1652 750
12 300
10.35 263
44.5 1130
45.12 1146
39 991
25.2 640
2423 1100
14 350
11.38 289
49.5 1257
50.24 1276
42 1067
27.56 700
3084 1400
16 400
13 330
54.5 1384
55.35 1406
47 1194
30.31 770
3524 1600
ASME CLASS 2500 (PN 420)
Size in/mm
D L
H Weight (lb/kg)
RF RTJ BW RF/RTJ
2 50
1.5 38
17.76 451
17.87 454
11 279
9.84 250
132 60
2 ½ 65
1.89 48
20 508
20.24 514
13 330
11 280
187 85
3 80
2.24 57
22.76 578
23 584
14.5 368
11.81 300
220 100
4 100
2.87 73
26.5 673
26.89 683
18 457
13.58 345
363 165
6 150
4.37 111
35.98 914
36.5 927
24 610
17.32 440
1013 460
8 200
5.75 146
40.24 1022
40.87 1038
30 762
21.06 535
1982 900
10 250
7.24 184
50 1270
54.8 1392
36 914
22.83 580
2863 1300
12 300
8.62 219
55.98 1422
56.89 1445
10.94 1040
26 660
3965 1800
DIMENSIONS AND WEIGHTS (Pressure Seal) ASME CLASS 1500/2500 (PN 250/420)
12
CHECK VALVE
OVERVIEW (Wafer Type)
STANDARDS
Design & Manufacture API 594 ,ASME B16.34 API 6D
Face-to-face API 594, ASME B16.10
End Dimension ASME B16.5 (RF) ASME B16.47 (RF) MSS SP-44 (NPS 22 Only)
Test & inspection API 598, API 6D, ISO 5208
TYPICAL MATERIALS
Body,Disc A216 WCB, WCC, A217 WC6,WC9 A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A,Monel, Inconel, Hastelloy
Seat FKM, HNBR, EPDM,
Pin A276 410, 304, 316,
Spring Inconel x750
External Pin Structure Internal Pin Structure
Part List
Typical Wafer Check Valve
Wafer Type, Dual Plate
Lug Type, Dual Plate
Flanged Type, Dual Plate
Wafer Type, Single Plate
Wafer Type, Lift Type
1
9
5
6
8
4
7
2
3
Body 1
Spring Seat 2
Spring 3
Disc 4
End Retainer 5
Pin 6
Middle Retainer
7
Screw 8
Washer 9
13
CHECK VALVE
DIMENSIONS AND WEIGHTS (Wafer Type) ASME CLASS 150 /300(PN 20/50)
-
ASME CLASS 150 (PN 20)
ASME CLASS 300 (PN 50)
Size in/mm
D L Weight (lb/kg) Size
in/mm D
L Weight (lb/kg)
WAFER / LUG WAFER WAFER / LUG WAFER
2 50
2 50
2.36 60
4 2
2 50
2 50
2.36 60
7 3
2 ½ 65
2 ½ 65
2.64 67
7 3
2 ½ 65
2 ½ 65
2.64 67
9 4
3 80
3 80
2.87 73
9 4
3 80
3 80
2.87 73
13 6
4 100
4 100
2.87 73
11 5
4 100
4 100
2.87 73
18 8
6 150
6 150
3.86 98
29 13
6 150
6 150
3.86 98
40 18
8 200
8 200
5 127
55 25
8 200
8 200
5 127
84 38
10 250
10 250
5.75 146
86 39
10 250
10 250
5.75 146
112 51
12 300
12 300
7.13 181
119 54
12 300
12 300
7.13 181
170 77
14 350
14 350
7.24 184
176 80
14 350
14 350
8.74 222
258 117
16 400
16 400
7.52 191
258 117
16 400
16 400
9.13 232
419 190
18 450
18 450
8 203
359 163
18 450
18 450
10.39 264
441 200
20 500
20 500
8.62 219
729 331
20 500
20 500
11.5 292
584 265
24 600
24 600
8.74 222
837 380
24 600
24 600
12.5 318
903 410
28 700
28 700
12 305
969 440
28 700
28 700
12 305
1145 520
30 750
30 750
12 305
1189 540
30 750
30 750
14.5 368
1278 580
36 900
36 900
14.5 368
1872 850
36 900
36 900
19 483
1960 890
40 1000
40 1000
17 432
2533 1150
40 1000
40 1000
22.36 568
2621 1190
48 1200
48 1200
20.63 524
3524 1600
48 1200
48 1200
24.76 629
3744 1700
(1)The dimension and weights are for reference only and subject to change without notice. (2)For more dimensional information, please contact our sales representative.
14
CHECK VALVE
DIMENSIONS AND WEIGHTS (Wafer Type) ASME CLASS 600 /900 (PN 100/150)
-
ASME CLASS 600 (PN 100)
`
ASME CLASS 900 (PN 150)
Size in/mm
D L Weight (lb/kg) Size
in/mm D
L Weight (lb/kg)
WAFER / LUG WAFER WAFER / LUG WAFER
2 50
2 50
2.36 60
9 4
2 50
2 50
2.76 70
18 8
2 ½ 65
2 ½ 65
2.64 67
11 5
2 ½ 65
2 ½ 65
3.27 83
24 11
3 80
3 80
2.87 73
18 8
3 80
3 80
3.27 83
31 14
4 100
4 100
3.11 79
24 11
4 100
4 100
4 102
44 20
6 150
6 150
5.35 136
57 26
6 150
6 150
6.26 159
93 42
8 200
8 200
6.5 165
121 55
8 200
8 200
8.11 206
185 84
10 250
10 250
8.39 213
209 95
10 250
10 250
9.5 241
319 145
12 300
12 300
9 229
308 140
12 300
12 300
11.5 292
485 220
14 350
14 350
10.75 273
491 223
14 350
14 350
14 356
770 350
16 400
16 400
12 305
793 360
16 400
16 400
15.12 384
1035 470
18 450
18 450
14.25 362
870 395
18 450
18 450
17.76 451
1333 605
20 500
20 500
14.5 368
1141 518
20 500
20 500
17.76 451
1806 820
24 600
24 600
17.24 438
1841 836
24 600
24 600
19.5 495
2313 1050
30 750
30 750
19.88 505
2423 1100
36 900
36 900
27.6 701
3524 1600
(1)The dimension and weights are for reference only and subject to change without notice. (2)For more dimensional information, contact one of our representatives.
15
CHECK VALVE
DIMENSIONS AND WEIGHTS (Wafer Type) ASME CLASS 1500 /2500 (PN 250/420)
-
ASME CLASS 1500 (PN 250)
ASME CLASS 2500 (PN 420)
Size in/mm
D L Weight (lb/kg) Size
in/mm D
L Weight (lb/kg)
WAFER / LUG WAFER WAFER / LUG WAFER
2 50
1.89 48
2.76 70
18 8
2 50
1.5 38
2.76 70
20 9
2 ½ 65
2.24 57
3.27 83
24 11
2 ½ 65
1.89 48
3.27 83
26 12
3 80
2.76 70
3.27 83
42 19
3 80
2.24 57
3.39 86
46 21
4 100
3.58 91
4 102
57 26
4 100
2.87 73
4.13 105
62 28
6 150
5.35 136
6.26 159
150 68
6 150
4.37 111
6.26 159
154 70
8 200
7 178
8.11 206
286 130
8 200
5.75 146
8.11 206
308 140
10 250
8.74 222
9.76 248
463 210
10 250
7.24 184
10 254
474 215
12 300
10.35 263
11.5 305
837 380
12 300
8.62 219
12 305
881 400
14 350
11.38 289
14 356
1211 550
16 400
13 330
15.12 384
1388 630
18 450
14.6 371
18.43 468
1652 750
20 500
16.38 416
21 533
1652 970
24 600
19.6 498
22 559
2599 1180
(1)The dimension and weights are for reference only and subject to change without notice. (2)For more dimensional information, please contact our sales representative.
16
CHECK VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
X e.g.
Nominal Size
A
1 6
Valve Type
B
C H
Pressure Rating
C
3
End Conn.
D
W
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
0 1
Seat
H
N
O-ring
I
0
is a NPS 16 Class 300, Check Valve, Wafer Type, A216 WCB body, 13Cr Trim, Nonrenewable Seat, No O-ring, No Operation.
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
B Valve Type
CH Check Valve
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125(PN16)
4 Class 400(PN64)
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
W Wafer
L Lug
E Construction
1 Swing, Bolt Cover
2 Swing, Welded Cover
3 Swing, Pressure Seal
4 Lift Type, Bolt Cover
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 C F8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
5 Lift Type, Welded Cover
6 Single Plate, Wafer
7 Dual Plate
8 Lift Type, Pressure Seal
G Trim Material
00 Special
01 13Cr/13Cr/13Cr
02 304/304/304
03 310/310/310
04 Hard 13Cr/Hard 13Cr/13Cr
05 Stellite /Stellite/13Cr
06 13Cr/Cu-Ni/13Cr
07 13Cr/Hard 13Cr /13Cr
08 13Cr/Stellite /13Cr
09 Monel/Monel /Monel
10 316/316/316
11 Monel/Stellite/Monel
12 316/Stellite/316
13 Alloy 20/Alloy 20 /Alloy 20
14 Alloy 20/Stellite /Alloy 20
15 Stellite /Stellite /304
16 Stellite /Stellite /316
17 Stellite /Stellite /347
18 Stellite /Stellite /Alloy 20
20 304L /304L /304L
21 316L /316L /316L
22 321 /321 /321
23 F55 /F55/F55
24 F51/F51 /F51
25 F53 /F53 /F53
32 316L /Stellite /316L
33 Stellite /Stellite /316L
34 304L /Stellite /304L
35 Stellite /Stellite /304L
17
CHECK VALVE
Operation Mode
J
X e.g.
Nominal Size
A
1 6
Valve Type
B
C H
Pressure Rating
C
3
End Conn.
D
W
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
0 1
Seat
H
N
O-ring
I
0
is a NPS 16 Class 300, Check Valve, Wafer Type, A216 WCB body, 13Cr Trim, Nonrenewable Seat, No O-ring, No Operation.
I O-Ring
0 None
1 Viton
2 Teflon
3 HNBR
4 NBR
5 Special
6 EPDM
X No Operation
J Operation H Seat
H HNBR
E EPDM
V VITON
B BUNA
R Renewable Metal
N Non Renewable Metal
18
CHECK VALVE
VALVE FIGURE NUMBER (CONT’D) HOW TO ORDER
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left
while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the
specification of the valve is not listed, select the code for “Special “. The total length of the figure number shall be
exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which
means eliminating “Specials”. If you don’t have enough specification or information about the valve you are
ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
FORGED STEEL VALVE
FS-1601C (EN)
MISSION STATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
FORGED STEEL VALVE
TABLE OF INDEX PAGE
Introduction, Features 3
Scope of Products & Flow Coefficient(CV) 4
Overview Gate Valve 5
Dimensions and Weights 6
Class 800 ~CL2500 (SW/NPT) 6
Class 150 ~CL1500 (RF/RTJ) 7
Class 900 ~CL2500 (Pressure Seal Bonnet) 8
Overview, T-Type Globe Valve 9
Dimensions and Weights 10
Class 800 ~CL2500 (SW/NPT) 10
Class 150 ~CL1500 (RF/RTJ) 11
Class 900 ~CL2500 (Pressure Seal Bonnet) 11-12
Overview, Y-Type Globe Valve 13
Dimensions and Weights 14
Class 800 ~CL2500 (SW/NPT) 14-15
Overview, Check Valve 16
Dimensions and Weights 17
Class 800 ~CL2500 (Swing Type ,SW/NPT) 17
Class 800 ~CL2500 (Lift Type ,SW/NPT) 18
Class 150 ~CL1500 (RF/RTJ) 19
Class 900 ~CL2500 (Pressure Seal Bonnet) 20
Overview Special Type 21
Valve Figure Number, How To Order 22-23
2
FORGED STEEL VALVE
This page is intentionally left blank.
3
FORGED STEEL VALVE
INTRODUCTION FEATURES
Forged Steel Check Valve
FBV forged check valve is to provide with single disc. With
the force of medium, the disc will automatically open or
close around the fixed pin shaft. When the media stops the
flow, the disc will be closed under its own force. No manual
intervention is involved in the whole process;
Check valve is mainly to prevent the media reverse flow
and ensure one-way flow of media channels only. It
prevents accidents while a sudden loss of power in the
pipeline medium such as the power equipment like pump
damages, and the medium reserve flow against power
source.
Forged Steel Globe Valve
FBV forged globe valve offers non-renewable seat by
default with rising stem and hand wheel. It blocks the
flow of pipeline through the rotation and lifting of hand
wheel as well as stem to drive the lift of disc. There is
no relative friction between disc and body sealing
surface. The globe valves has the feature of long
service life for opening and closing, it can be used a
shut-off valve for small size pipeline.
Forged Steel Gate Valve
FBV forged steel gate vales adopts solid gate, renewable
seat, rising stem and non-ring hand wheel. It plays the role
of pipe opening and closing ultimately through the
rotation of the hand wheel to drive the lifting of gate.
INTRODUCTION
FBV forged steel valve has the advantages of small volume
and compact type. Bolted bonnet, welded bonnet, pressure
bonnet, bellow seal bonnet, high/low temperature extended
bonnet and ISO 15848 fugitive emission designed valves are
available upon different request of services.
4
FORGED STEEL VALVE
SCOPE OF PRODUCTS Forged Steel Valve(Gate, Globe, Check)
Legends: A – Available in Bolted Bonnet B – Available in Welded Bonnet
C – Available in Pressure Seal Bonnet D – Not Usually Required
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 800 PN 136
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
3/8 10
AB AB AB ABC ABC ABC BC
1/2 15
AB AB AB ABC ABC ABC BC
3/4 20 AB AB AB ABC ABC ABC BC
1 25 AB AB AB ABC ABC ABC BC
1-1/4 32
AB AB AB ABC ABC ABC BC
1-1/2 40
AB AB AB ABC ABC ABC BC
2 50
AB AB AB ABC ABC ABC BC
2-1/2 65
AB AB AB A C D D
3 65 D D D D D D D
1.The sizes listed above are normal diameters. Contact our sales representative if any other dimensions are requested;
FLOW COEFFICIENT (Cv)
Nominal Size
in/mm
Gate Valve Globe Valve / Piston Check valve
Swing Check Valve T-Type Y-Type
Regular Port Full Port Regular Port Full Port Full Port Regular Port Full Port
3/8 10 - 3.9 - 2.2 3 - 4.8
1/2 15 3.7 6.7 2 3.8 5.4 4.6 7.7
3/4 20 6.4 11.7 3.6 6 11.4 7.4 14.5
1 25 11.4 22.5 5.7 9.4 18 14.1 25.5
1-1/4 32 22 35.4 8.8 14.7 29.2 25.1 37
1-1/2 40 35 54.5 14.3 21.5 45.6 36.7 60.2
2 50 53.9 - 21.1 - 72 59.7 -
The above data remains the same based on different pressure rating;
CALCULATION OF FLOW COEFFICIENT Flow coefficient Cv is the rate of flow in gallon per minute with the pressure drop of 1 psi across the valve. The flow coefficients shown in the above table are determined with equations as follows: For liquids:
For gases (non-critical):
𝐐𝐥 = 𝐂𝐯 𝚫𝐏 𝐒𝐆 𝟏/𝟐 Where: Ql = Flow of liquid (gallon/minute) ΔP = Pressure drop in psi (P1-P2) SG = Specific gravity (1 for liquid)
𝐐𝐠 = 𝟔𝟏 ∙ 𝐂𝐯 𝐏𝟐 ∙ 𝐏𝟏 ∕ 𝐒𝐆 𝟏/𝟐 Where: Qg = Flow of gases (SFH at STP) P2 = Outlet pressure (psi) P1 = Inlet pressure (psi) SG = Specific gravity (1 for gas)
5
FORGED STEEL VALVE
OVERVIEW(Gate Valve)
Part List
Standards
Design & Manufacture API 602, ISO 15761, ASME B16.34
Face-to-face FBV'STD, ASME B16.10
End Dimension ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW) ASME B16.5 (RF, RTJ),
Test & Inspection API 598
Typical Materials Body, Bonnet,Disc
A105,A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A276 410, F304, F304L, F316, F316L, F51, F53, Monel, Inconel, Hastelloy
9
10
11
5
2
3
4
6
7
8
1
12 13
14
15
16
9
5
2
3
4
6
7
8
1
9
2
3
4
6
8
1
10
11
12
13
14
15
16
10
11
12
13
14
15
16
Body 1
Seat Ring 2
Disc 3
Stem 4
Gasket 5
Bonnet 6
Bolt 7
Packing 8
Gland 9
Eyes Bolt 10
Gland Flange 11
Nut 12
Stem Nut 13
Handwheel 14
Nameplate 15
Nut 16
6
FORGED STEEL VALVE
-
CL800 Bolt Bonnet (BB)/Welding Bonnet (WB), Reduce Port (RP)/Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW),
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 79 92 111 120 120 140 178
Handwheel Diameter W 100 100 125 160 160 180 200
Height H 165 169 207 230 249 283 333
Flow Port Diameter d 10.3 13.5 18 23 29 36 45
Weight (Kg)
B.B 2.2 2.4 4.1 5.5 7.5 10 19
W.B 2.1 2.3 4 5.5 7.3 9.5 18.5
-
CL900~CL1500 Bolt Bonnet (BB)/ Welding Bonnet (WB), Reduce Port (RP)/ Full Port(FP), Outside Screw and Yoke(OS&Y), Thread(NPT), Socket Weld(SW), Butt Weld(BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 92 111 120 120 140 178
Handwheel Diameter W 100 125 160 160 180 200
Height H 169 207 230 249 283 333
Flow Port Diameter d 10.3 13.5 18 23 29 36
Weight (Kg)
B.B 2.4 4.1 6.2 6.2 8.7 12.5
W.B 2.2 4 6 6 8.5 12
-
CL2500 Welding Bonnet (WB), Reduce Port (RP)/Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 120 120 120 140 178 178
Handwheel Diameter W 160 160 160 180 200 200
Height H 230 235 249 283 333 333
Flow Port Diameter d 10.3 13.5 18 23 29 36
Weight (Kg)
W.B 6.5 6.5 6.5 9 13 13
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative. 2. CL800 covers CL150, CL300, CL600, CL1500 covers CL900, CL1500.
DIMENSIONS AND WEIGHTS (Gate Valve)
7
FORGED STEEL VALVE
-
CL150~CL600 Bolt Bonnet (BB). Reduce Port (RP), Outside Screw and Yoke (OS&Y), Flanged (RF/RTJ)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
Face To Face
CL150 L
(RF)
108 117 127 140 165 178
CL300 140 152 165 178 190 216
CL600 165 190 216 229 241 292
Handwheel Diameter W 100 100 125 160 160 180
Height H 165 169 207 230 249 283
Flow Port Diameter d 10.3 13.5 18 23 29 36
Weight (Kg)
CL150
B.B
4.1 4.8 7.1 10 11.6 20
CL300 4.8 6.7 10 13.6 17.2 24
CL600 5.4 7.4 10.6 15 19.2 28.8
-
CL900~CL1500 Bolt Bonnet (BB). Reduce Port (RP), Outside Screw and Yoke (OS&Y), Flanged (RF/RTJ)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
Face To Face CL90 L
(RF) 216 229 254 279 305 368
CL1500
Handwheel Diameter W 125 125 160 160 180 180
Height H 169 207 230 249 283 333
Flow Port Diameter d 10.3 13.5 18 23 29 36
Weight (Kg)
CL900 B.B 10.1 13 18.3 26 32.8 54
CL1500
The dimension and weights are for reference only and subject to change without notice. 1.The flanged valve are defaulted by integral flange; 2.For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Gate Valve)
8
FORGED STEEL VALVE
-
CL900~CL2500 Pressure Seal Bonnet (PSB), Full Port (FP), Outside Screw and Yoke (OS&Y), Thread(NPT), Socket Weld(SW), Butt Weld (BW)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900CL1500 L
140 140 140 140 178 178 216
CL2500 182 182 182 182 232 232 272
Handwheel Diameter
CL900CL1500 CL2500
W 200 200 200 200 280 280 300
Height
CL900CL1500 H
308 308 315 315 446 446 540
CL2500 325 325 325 325 460 460 550
Flow Port Diameter d 8 10.3 13.5 18 23 29 36
Weight (Kg)
CL900CL1500 PSB
9 9 9 9 26 26 36
CL2500 11.9 11.9 11.8 11.7 30 28 42
-
CL900~CL2500 Pressure Seal Bonnet (PSB), Full Port (FP), Outside Screw and Yoke (OS&Y), Flanged (RF/RTJ)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900 CL1500 L
(RF)
216 229 254 279 305 368
CL2500 264 273 308 349 384 451
Handwheel Diameter
CL900 CL1500 CL2500
W 200 200 200 280 280 300
Height
CL900 CL1500
H 308 315 315 446 446 540
CL2500 325 325 325 460 460 550
Flow Port Diameter d 10.3 13.5 18 23 29 36
Weight (Kg)
CL900 CL1500 PSB
11.9 13.7 18 36.8 37 45
CL2500 13 17 22 30 42 58
The dimension and weights are for reference only and subject to change without notice. 1.The flanged valve are defaulted by integral flange; 2.For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Gate Valve - Pressure Seal Bonnet)
9
FORGED STEEL VALVE
OVERVIEW (Globe Valve)
Part List
Standards
Design & Manufacture API 602, ISO 15761, ASME B16.34
Face-to-face FBV'STD, ASME B16.10
End Dimension ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW) ASME B16.5 (RF, RTJ),
Test & Inspection API 598
Typical Materials Body, Bonnet,Disc
A105,A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A276 410, F304, F304L, F316, F316L, F51, F53, Monel, Inconel, Hastelloy
8
9
10
4
2
3
5
6
7
1
11
12
13
14
15
8
4
2
3
5
6
7
1
8
2
3
5
7
1
9
10
11
12
13
14
15
9
10
11
12
13
14
15
Body 1
Disc 2
Stem 3
Gasket 4
Bonnet 5
Bolt 6
Packing 7
Gland 8
Eyes Bolt 9
Gland Flange 10
Nut 11
Stem Nut 12
Handwheel 13
Nameplate 14
Nut 15
10
FORGED STEEL VALVE
CL800 Bolt Bonnet (BB)/ Welding Bonnet(WB), Reduce Port (RP)/Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 79 92 111 120 152 172 220
Handwheel Diameter W 100 100 125 160 160 180 200
Height H 170 172 207 228 270 320 356
Flow Port Diameter d 10.5 13.5 17 22 28 34 44
Weight (Kg)
B.B 2.2 2.4 4.1 5.7 7.6 12.2 21
W.B 1.9 2.1 3.9 5.5 7.4 11.6 19.7
CL900~CL1500 Bolt Bonnet (BB)/ Welding Bonnet (WB), Reduce Port (RP)/Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 92 111 120 152 172 220
Handwheel Diameter W 100 125 160 160 180 200
Height H 172 207 228 270 320 387
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
B.B 4.1 5.6 6.7 7.6 12.2 21
W.B 3.8 5.4 6.5 7.4 12 20.2
CL2500 Welding Bonnet (WB), Reduce Port (RP)/Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 120 120 152 172 220 220
Handwheel Diameter W 160 160 160 180 200 200
Height H 228 228 270 320 387 396
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
W.B 6.7 6.5 7.6 12.2 21 20.7
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Globe Valve)
11
FORGED STEEL VALVE
CL150~CL600 Bolt Bonnet (BB), Reduce Port (RP), Outside Screw and Yoke (OS&Y), Flanged (RF/RTJ)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
Face To Face
CL150 L
(RF)
108 117 127 140 165 203
CL300 152 178 203 216 229 267
CL600 165 190 216 229 241 292
Handwheel Diameter W 100 100 125 160 160 180
Height H 170 172 207 228 270 320
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
CL150
B.B
4.1 4.8 7.1 10 12.7 21
CL300 4.8 6.7 10 14.5 18.3 25.2
CL600 5.4 7.4 11 16 19.2 28.8
CL900~CL1500 Bolt Bonnet (BB), Reduce Port (RP), Outside Screw and Yoke (OS&Y), Flanged (RF/RTJ)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
Face To Face CL900 L
(RF) 216 229 254 279 305 368
CL1500
Handwheel Diameter W 100 100 125 160 160 180
Height H 170 172 207 228 270 320
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
CL900 B.B 10.1 13 18.3 26 32.8 54
CL1500
The dimension and weights are for reference only and subject to change without notice. 1. The flanged valve are defaulted by integral flange; 2. For more size or dimensional information, please contact our sales representative.
.
DIMENSIONS AND WEIGHTS (Globe Valve)
12
FORGED STEEL VALVE
CL900~CL2500 Pressure Seal Bonnet (PSB), Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900CL1500 L
140 140 140 140 178 178 216
CL2500 182 182 182 182 232 232 272
Handwheel Diameter
CL900CL1500 CL2500
W 160 160 160 160 180 180 200
Height
CL900CL1500 H
325 325 325 325 430 430 495
CL2500 330 330 330 330 480 480 530
Flow Port Diameter d 8 13.5 17 22 28 34 42
Weight (Kg)
CL900CL1500 PSB
9 9 8.9 8.8 26 25.6 45
CL2500 12.3 12.3 11.6 11 26 28.4 60
CL900~CL2500 Pressure Seal Bonnet (PSB), Full Port (FP), Outside Screw and Yoke (OS&Y), Flanged (RF/RTJ)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900 CL1500 L
(RF)
216 229 254 279 305 368
CL2500 264 273 308 349 384 451
Handwheel Diameter
CL900 CL1500 CL2500
W 160 160 160 180 180 200
Height
CL900 CL1500 H
325 325 325 430 430 495
CL2500 330 330 330 480 480 530
Flow Port Diameter d 13.5 17 22 28 34 42
Weight (Kg)
CL900 CL1500 PSB
11.9 13.7 18 36.8 37 45
CL2500 13 17 22 30 42 58
The dimension and weights are for reference only and subject to change without notice. 3. The flanged valve are defaulted by integral flange; 4. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Globe Valve-Pressure Seal Bonnet)
13
FORGED STEEL VALVE
DIMENSIONS AND WEIGHTS (Globe Valve-Y-Type)
Part List
Standards
Design & Manufacture ASME B16.34
Face-to-face FBV'STD
End Dimension ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW) ASME B16.5 (RF, RTJ),
Test & Inspection API 598
Typical Materials Body, Bonnet,Disc
A105,A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Stem A276 410, F304, F304L, F316, F316L, F51, F53, Monel, Inconel, Hastelloy
8
9
10
4
2
3
5
6
7
1 11
12
13
14
15
Body 1
Disc 2
Stem 3
Gasket 4
Bonnet 5
Bolt 6
Packing 7
Gland 8
Eyes Bolt 9
Gland Flange 10
Nut 11
Stem Nut 12
Handwheel 13
Nameplate 14
Nut 15
8
9
10
2
3
5
7
1
8
9
10
4
2
3
7
1 11
12
13
14
15
11
12
13
14
15
14
FORGED STEEL VALVE
CL800 Bolt Bonnet (BB)/ Welding Bonnet (WB), Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 100 100 100 120 140 140 172
Handwheel Diameter W 100 125 160 160 160 180 200
Height H 180 180 188 280 280 295 350
Flow Port Diameter d 10 13.5 17 22 28 34 42
Weight (Kg)
B.B 3.8 4.6 4.6 9.3 14 14 19.6
W.B 3.7 4.5 4.5 9 13.5 13.5 19.1
CL900~CL1500 Bolt Bonnet (BB)/ Welding Bonnet (WB), Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 100 100 120 140 140 172 220
Handwheel Diameter W 125 160 160 160 180 200 200
Height H 180 188 280 280 295 350 365
Flow Port Diameter d 10 13.5 17 22 28 34 42
Weight (Kg)
B.B 4.6 4.6 9.3 14 14 19.6 38.6
W.B 4.5 4.5 9 13.5 13.5 19.1 38
CL2500 Welding Bonnet (WB), Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 120 140 140 172 220 232
Handwheel Diameter W 160 160 180 200 200 250
Height H 280 280 295 350 365 400
Flow Port Diameter d 17 22 28 34 42 55
Weight (Kg)
W.B 9.3 14 14 19.6 38.6 53.5
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Globe Valve-Y-Type)
15
FORGED STEEL VALVE
CL900~CL2500 Pressure Seal Bonnet (PSB), Full Port (FP), OutSide Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900 CL1500 L
140 140 140 140 232 232 232
CL2500 140 140 140 140 232 232 272
Handwheel Diameter
CL900 CL1500 W 160 160 160 180 200 200 250 CL2500
Height
CL900 CL1500 H
280 280 280 295 350 365 400
CL2500 280 280 280 295 350 365 420
Flow Port Diameter d 13 17 22 28 34 42 55
Weight (Kg)
CL900 CL1500 PSB
12.5 12.5 12.5 12.5 28 26.5 36
CL2500 12.5 12.5 12.5 12.5 28 26.5 42
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Globe Valve-Pressure Seal Bonnet)
16
FORGED STEEL VALVE
OVERVIEW (Check Valve)
Part List
Standards
Design & Manufacture API 602, ISO 15761, ASME B16.34
Face-to-face FBV'STD, ASME B16.10
End Dimension ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW) ASME B16.5 (RF, RTJ),
Test & Inspection API 598
Typical Materials Body, Cover Disc
A105,A350 LF2, LF3, LF5, A182 F304, F304L, F316, F316L, F51, F53, F5,F11,F22,F91, Monel, Inconel, Hastelloy
Hinge A351 CF8M, Monel, Inconel, Hastelloy
5
7
1
2
3
4
8
9
10
Body 1
Seat 2
Disc 3
Nut 4
Hinge 5
Pin 6
Gasket 7
Bolt 8
Cover 9
Bolt 10
Plug 11
Spring 12
6 5
6
1
11
12
7
9
6
5
7
1
2
3
4
8
10
6
9
17
FORGED STEEL VALVE
CL800 Bolt Cover (BC)/ Welding Cover (WC) Reduce Port (RP)/Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 79 92 111 120 120 140
Height H 55 60 80 90 100 105
Flow Port Diameter
d 10.5 13.5 17 22 28 34
Weight (Kg)
B.B 1.8 2 3.8 4.5 5.5 9
W.B 1.7 1.9 3.6 4.3 5.3 8.7
CL900 CL1500
Bolt Cover (BC)/ Welding Cover (WC) Reduce Port (RP)/Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 92 111 120 120 140 178
Height H 60 80 90 100 105 115
Flow Port Diameter
d 10.5 13.5 17 22 28 34
Weight (Kg)
B.B 2 3.9 4.5 5.5 9 16
W.B 1.9 3.6 4.3 5.3 8.7 15.5
CL2500 Welding Cover (WC), Reduce Port (RP)/Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 120 120 120 140 178 178
Height H 90 100 105 115 115 115
Flow Port Diameter
d 10.5 13.5 17 22 28 34
Weight (Kg)
W.B 4.5 5.5 9 16 23 23
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Check Valve - Swing Type )
18
FORGED STEEL VALVE
CL800 Bolt Cover (BC)/ Welding Cover (WC) Reduce Port (RP)/ Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 79 92 111 120 152 172
Height H 55 55 65 80 85 105
Flow Port Diameter
d 10.5 13.5 17 22 28 34
Weight (Kg)
B.B 1.2 1.5 2.1 3.5 4.8 7.6
W.B 1.1 1.3 2 3.3 4.6 7.4
CL900 CL1500
Bolt Cover (BC)/ Welding Cover (WC) Reduce Port (RP)/ Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2
F.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 92 111 120 152 172 220
Height H 55 65 80 85 105 115
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
B.B 1.5 2.1 3.5 4.8 7.6 12.5
W.B 1.3 2 3.3 4.6 7.4 12.1
CL2500 Welding Cover (WC), Reduce Port (RP)/Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face L 120 120 152 172 220 220
Height H 80 80 85 105 115 115
Flow Port Diameter
d 10.5 13.5 17 22 28 34
Weight (Kg)
W.B 3.5 3.5 4.8 7.6 12.5 12.5
The dimension and weights are for reference only and subject to change without notice. 1. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Check Valve - Lift Type )
19
FORGED STEEL VALVE
CL800 CL900~CL1500
Bolt Cover (BC)/ Welding Cover (WC) Full Port (FP) Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
F.P 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face CL800
L 100 100 120 140 140 172
CL900 CL1500
100 120 140 140 172 220
Height H 70 70 70 100 110 120
Flow Port Diameter d 13.5 17 22 28 34 44
Weight (Kg)
CL800 B.B 2.2 2.2 2.2 4.2 9 9
W.B 2.1 2.1 2.1 4 8.8 8.8
CL900 CL1500
B.B 4.2 9 9 10 18.6 20
W.B 4 8.8 8.8 9.7 18.2 19.5
CL150~CL600 Bolt Cover (BC)/ Welding Cover (WC) Reduce Port (RP), Flanged (RF/RTJ)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL150 L
(RF)
108 117 127 140 165 203
CL300 152 178 203 216 229 267
CL600 165 190 216 229 241 292
Height H 55 55 65 80 85 105
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
CL150
B.B
3.5 3.5 4.7 8.5 11.5 13
CL300 3.5 3.5 5.6 8.6 12 14
CL600 3.5 3.5 6.5 10.5 16 22
CL900 CL1500
Bolt Cover (BC)/ Welding Cover (WC) Reduce Port (RP), Flanged (RF/RTJ)
Size (NPS)
R.P 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face CL900
CL1500 L
(RF) 216 229 254 279 305 368
Height H 55 55 65 80 85 105
Flow Port Diameter d 10.5 13.5 17 22 28 34
Weight (Kg)
CL150 CL300
B.B 4.5 5.8 8.7 14.5 22 32
The dimension and weights are for reference only and subject to change without notice. 1. The flanged valve are defaulted by integral flange. 2. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Check Valve )
20
FORGED STEEL VALVE
DIMENSIONS AND WEIGHTS (Check Valve - Pressure Seal Cover)
CL900~CL2500 Pressure Seal Bonnet (PSB), Reduce Port (RP), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900 CL1500 L
140 140 140 140 178 178 216
CL2500 182 182 182 182 232 232 272
Height H 115 115 115 115 150 150 195
Flow Port Diameter d 8 10.3 13.5 18 23 29 36
Weight (Kg)
CL900 CL1500 PSB
7.5 7.5 7.5 7.5 10.5 10.3 22
CL2500 11.8 11.8 11 11 23 26.5 39
-
CL900~CL2500 Pressure Seal Bonnet (PSB), Full Port (FP), Outside Screw and Yoke (OS&Y), Thread (NPT), Socket Weld (SW), Butt Weld (BW)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900 CL1500 L
140 140 140 140 178 178 216
CL2500 182 182 182 182 232 232 272
Height H 115 115 115 115 150 150 195
Flow Port Diameter d 8 13.5 17 22 28 34 42
Weight (Kg)
CL900 CL1500 PSB
7.5 7.5 7.5 7.5 10.5 10.3 22
CL2500 11.8 11.8 11 11 23 26.5 39
-
CL900~CL2500 Pressure Seal Bonnet (PSB), Reduce Port (RP), Flanged (RF/RTJ)
Size (NPS)
R.P 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Face To Face
CL900 CL1500 L
(RF)
216 229 254 279 305 368
CL2500 264 273 308 349 384 451
Height H 115 115 115 150 150 195
Flow Port Diameter d 13.5 17 22 28 34 42
Weight (Kg)
CL900 CL1500 PSB
10.5 12 14 20 27 33
CL2500 13 15 17 25 30 35
1. The flanged valve are defaulted by integral flange. 2. The dimension and weights are for reference only and subject to change without notice. 3. For more dimensional information, please contact our sales representative.
21
FORGED STEEL VALVE
OVERVIEW (Special Type Forge Steel Valve)
-
Low Temperature Extension High Temperature Extension Bellow Seal Extension
Structure characteristics: 1. The bonnet are extended for low temperature
service, the packing position are raised to avoid the freeze of packing which will affect packing sealing performance;
2. The gate valve shall have relief hole on upstream direction while the pressure may remain in the cavity;
3. Low temperature cold isolation can be an option to prevent cold heat exchange
Structure characteristics: 1. The high temperature extended structure is
mainly to prevent scald operator during operation.
2. The cooling fin can be selected to help heat radiation.
Structure characteristics: 1. Bellow seal extension has the bellow inside of the cavity, the effective compression of the bellows must be greater than the opening stroke of the valve; 2. Bellow seal structure can effectively reduce the leakage of valve stem, the primary seal is for bellows and secondary seal as a filler.
1. The above schematics for extension are based on gate valves , it can apply to both forged gate and globe valve; 2. Welded bonnet is available other than the above mentioned bolted bonnet.
22
FORGED STEEL VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
X e.g.
Nominal Size
A
R 1
Valve Type
B
C H
Pressure Rating
C
8
End Conn.
D
S
Construct-ion
E
1
Body Material
F
C 1
Trim Material
G
0 1
Seat
H
R
O-ring
I
0
is a NPS 1x3/4 Class 800, Check Valve, Swing Type ,Socket Welding, A105 body, 13Cr Trim, Renewable Seat, No O-ring, No operation.
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4
4 RB
A Nominal Size
E Construction
X0 Special
C1 A105
M1 A182 F1
M3 A182 F2
M5 A182 F12 CL 2
M7 A182 F11 CL 2
M9 A182 F22 CL 3
E1 A182 F5
E5 A182 F9
E7 A182 F91
L1 A350 LF1
L3 A350 LF2
L5 A350 LF3
A182 F316L S7
A182 F347 S9
A182 F51 D1
A182 F53 D3
A182 F55 D5
L7 A350 LF5
L9 A350 LF6
LA A350 LF9
S1 A182 F304
S3 A182 F304L
S5 A182 F316
F Body Material
G Trim Material I O-Ring
0 None
H Seat
R Renewable Metal
N Non Renewable Metal
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125(PN16)
4 Class 400(PN64)
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
Valve Type B
GA Gate Valve
GL Globe Valve
CH Check Valve
B Bare Stem
H Hand Wheel
G Gearbox
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
O Solid Hand Wheel
V Hand Wheel with locking device
J Operation
1 Swing, Bolt Cover
2 Swing, welded Cover
3 Swing, Pressure Seal
4 Lift Type, Bole Cover
6 Single Plate, Wafer
7 Dual Plate
8 Lift Type, Pressure Seal
CH
5 Lift Type, Welded Cover
1 Flexible wedge, Bolted Bonnet
GA
2 Flexible wedge, Welded Bonnet
3 Flexible wedge, Pressure Seal
4 Flexible wedge, Bellow Seal
5 Solid wedge, Bolted Bonnet
6 Solid wedge, Welded Bonnet
7 Solid wedge, Pressure Seal
8 Solid wedge, Bellow Seal
1 Straight pattern, Bolted Bonnet
GL
2 Straight pattern, Welded Bonnet
3 Straight pattern, Pressure Seal
4 Y- pattern, Bolted Bonnet
5 Y- pattern, Welded Bonnet
6 Y- pattern, Pressure Seal
00 Special
01 13Cr/13Cr/13Cr
02 304/304/304
03 310/310/310
04 Hard 13Cr/Hard 13Cr/13Cr
05 Stellite /Stellite/13Cr
06 13Cr/Cu-Ni/13Cr
07 13Cr/Hard 13Cr /13Cr
08 13Cr/Stellite /13Cr
09 Monel/Monel /Monel
10 316/316/316
11 Monel/Stellite/Monel
12 316/Stellite/316
13 Alloy 20/Alloy 20 /Alloy 20
14 Alloy 20/Stellite /Alloy 20
15 Stellite /Stellite /304
16 Stellite /Stellite /316
17 Stellite /Stellite /347
18 Stellite /Stellite /Alloy 20
20 304L /304L /304L
21 316L /316L /316L
22 321 /321 /321
23 F55 /F55/F55
24 F51/F51 /F51
25 F53 /F53 /F53
32 316L /Stellite /316L
33 Stellite /Stellite /316L
34 304L /Stellite /304L
35 Stellite /Stellite /304L
X No Operation
23
FORGED STEEL VALVE
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left
while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the
specification of the valve is not listed, select the code for “Special “. The total length of the figure number shall be
exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which
means eliminating “Specials”. If you don’t have enough specification or information about the valve you are
ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
PLUG VALVE
PL-1401C (EN)
MISSION STATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
PLUG VALVE
TABLE OF INDEX PAGE
Introduction, Features 3
Scope of Products, 4
Overview, Sleeved Type 5
Dimensions and Weights 6
Class 150 (PN 20) 6
Class 300 (PN 50) 7
Class 600 (PN 100) 8
Overview, Pressure Balanced Type 9
Dimensions and Weights 10
Class 150 (PN 20) 10
Class 300 (PN 50) 11
Class 600 (PN 100) 12
Class 900 (PN 150) 13
Seat and Seal Material, Selection Guide 14
Valve Figure Number, How To Order 15-16
2
PLUG VALVE
This page is intentionally left blank.
3
PLUG VALVE
INTRODUCTION FEATURES
INTRODUCTION
A plug valve is a valve with a conical plug, the part of
the valve which controls the flow through it. The plug
has a hole, or port, through the middle so that when the
port is in line with both ends of the valve, flow will
occur. When the valve is closed, the hole is
perpendicular to the ends of the valve, and flow is
blocked.
FBV produces Sleeved Type and Pressure Balanced
Type plug valves.
SLEEVED TYPE
This type of plug valve has tapered plug that is installed
to the body from top; it is generally soft seated type for
which service temperature is limited by the kind of
sleeve it uses. The maximum service temperature is
about 150 oC, and the pressure is not high either.
PRESSURED BALANCED TYPE
This type of plug valve has tapered plug that is installed
from bottom to the valve body and is generally metal
seated, which makes it good for high pressure high
temperature services. The valves are provided with
sealant injecting fittings on stem and plug.
BLOWOUT PROOF STEM
The valve stem is made with a shoulder at the bottom
end. It’s securely retained by the stuffing box, to avoid
that the stem, under certain operating conditions,
accidentally blows out. Other designs are available on
request.
ANTI-STATIC
Because the plug and stem in a plug valve are
suspended on non-metallic parts, i.e. the seat seal
and stem seal, there is a possibility a static charge
may build up on the stem-plug, is introduced in the
design to maintain the metal-to-metal contact
between the rotating plug/stem and the valve body
which will ground any charges to the valve body.
Grease Fitting
Stem Grease Fitting Body Grease Fitting
Stem
Grease Fitting
Body Cavity
Check Valve
Grease Fitting
Seat Sleeve
Plug
4
PLUG VALVE
SCOPE OF PRODUCTS
Legends: A – Available in Casting and Forging B – Available in Casting Only C – Available Forging Only
D – Not Usually Required E – Casting Not Recommended
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
Class 2500 PN 420
½ 15
A A A A A A,E
¾ 20
A A A A A A,E
1 25 A A A A A A,E
1 ½ 40 A A A A A A,E
2 50
A A A A A A,E
2 1/2 65
B B B B B B,E
3 80
B B B B B B,E
4 100
B,D B,D B,D B,D B,D B,D,E
6 150 B B B B B B,E
8 200 B B B B B B,E
10 250
B B B B B B,E
12 300
B B B B B B,E
14 350
B B B B B
16 400
B B B B B
18 450 B B B B B
20 500 B B B B B
22 550
B,D B,D B,D B,D B,D
24 600
B B B B B
26 650
B,D B,D B,D B,D B,D
28 700
B,D B,D B,D B,D B,D
30 750 B B B B B
32 800 B B B B B
34 850
B,D B,D B,D B,D B,D
36 900
B B B B B
5
PLUG VALVE
OVERVIEW (SLEEVE TYPE)
TYPICAL MATERIALS
Body/Bonnet (Forging, for NPS ≤ 2)A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5 (Casting)A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2, Monel, Inconel, Hastelloy
Plug CA15, CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS+TCC, CS+Ni60
Seat PTFE, RPTFE, PPL
Stem A182 F6a, F316, F51, A105+ENP, AISI 4140+ENP, 17-4PH
Packing Graphite, PTFE, RPTFE
O-ring Viton, NBR, HNBR, AFLAS
STANDARDS
Design & manufacture API 599, API 6D, ISO 14313,
Face-to-face API 6D, ASME B16.10
End Dimension ASME B16.5 (RF, RTJ), ASME B16.47 (RF,RTJ) MSS SP-44 (NPS 22 Only) ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW)
Test & inspection API 6D, API 598
Fire safe API 6FA, API 607
Other NACE MR 01-75, MR 0103
1
8
6
5
4
3
2
7
9
11
12
13
10
1
2
3
4
5
6
7
8
10
11
12
13
2
Body
Seat Sleeve
Gasket
Bonnet
Packing
Stud
Plug Gland Flanged
Nut
Yoke
Gear
Lever
9
Stem
6
PLUG VALVE
ASME CLASS 150 (PN 20)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
4.25 108
- 5.98 152
4.33 110
6.89 175
19 8.5
¾ 20
0.75 19.1
4.61 117
- 7 178
4.53 115
6.89 175
21 9.5
1 25
1 25.4
5 127
5.51 140
8 203
4.53 115
6.89 175
22 10
1 ¼ 32
1.25 31.8
5.51 140
6.02 153
8.5 216
5.31 135
8.66 220
26 12
1 ½ 40
1.5 38.1
6.5 165
7 178
9 229
5.51 140
11.02 280
31 14
2 50
2 50.8
7 178
7.5 191
10.51 267
5.91 150
12 305
49 22
2 ½ 65
2.5 63.5
7.5 191
8 203
12 305
6.5 165
13.78 350
49 22
3 80
3 76.2
8 203
8.5 216
13 330
7.09 180
15.94 405
57 26
4 100
4 101.6
9 229
9.5 241
14 356
14.96 380
11.81 300
88 40
5 125
5 127
10 254
10.6 269
15 381
18.11 460
11.81 300
132 60
6 150
6 152.4
10.5 267
11 279
18 457
20.47 520
12.6 320
154 70
8 200
8 203.2
11.5 292
12 305
20.5 521
22.83 580
12.6 320
287 130
10 250
10 254
13 330
13.5 343
22 559
24.41 620
13.78 350
483 219
12 300
12 304.8
14 356
14.5 368
25 635
26.77 680
14.96 380
840 381
14 350
14 336.6
16 406
16.5 419
27 686
29.92 760
17.71 450
1257 570
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4 2. For more dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Sleeve Type) ASME CLASS 150 (PN 20)
7
PLUG VALVE
ASME CLASS 300 (PN 50)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
5.51 140
5.94 151
6 152
4.33 110
6.89 175
21 9.5
¾ 20
0.75 19.1
6 152
6.5 165
7 178
4.53 115
6.89 175
23 10.5
1 25
1 25.4
6.5 165
7 178
8 203
4.53 115
6.89 175
26 12
1 ¼ 32
1.25 31.8
7 178
7.52 191
8.5 216
5.31 135
8.66 220
31 14
1 ½ 40
1.5 38.1
7.48 190
8 203
9 229
5.51 140
11.02 280
35 16
2 50
2 50.8
8.5 216
9.13 232
10.51 267
5.91 150
12 305
44 20
2 ½ 65
2.5 63.5
9.5 241
10.12 257
12 305
6.5 165
13.78 350
53 24
3 80
3 76.2
11.1 282
11.73 298
13 330
7.09 180
15.94 405
64 29
4 100
4 101.6
12 305
12.64 321
14 356
14.96 380
11.81 300
117 53
5 125
5 127
15 381
15.63 397
15 381
18.11 460
11.81 300
165 75
6 150
6 152.4
15.87 403
16.5 419
18 457
20.47 520
12.6 320
187 85
8 200
8 203.2
16.5 419
17.12 438
20.51 521
22.83 580
12.6 320
408 185
10 250
10 254
18 457
18.6 473
22 559
24.41 620
13.78 350
507 230
12 300
12 304.8
19.76 502
20.39 518
25 635
26.77 680
14.96 380
860 390
14 350
14 336.6
30 762
30.63 778
30 762
29.92 760
17.71 450
1213 550
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4. 2. For more dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Sleeve Type) ASME CLASS 300 (PN 50)
8
PLUG VALVE
ASME CLASS 600 (PN 100)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
6.5 165
6.42 163
6.5 165
4.33 110
6.89 175
24 11
¾ 20
0.75 19.1
7.48 190
7.48 190
7.48 190
4.53 115
6.89 175
29 13
1 25
1 25.4
8.5 216
8.5 216
8.5 216
4.53 115
6.89 175
37 17
1 ¼ 32
1.25 31.8
9 229
9 229
9 229
5.31 135
8.66 220
44 20
1 ½ 40
1.5 38.1
9.49 241
9.49 241
9.49 241
5.51 140
11.02 280
51 23
2 50
2 50.8
11.5 292
11.61 295
11.5 292
5.91 150
12 305
60 27
2 ½ 65
2.5 63.5
13 330
13.11 333
13 330
6.5 165
13.78 350
68 31
3 80
3 76.2
14 356
14.13 359
14 356
7.09 180
15.94 405
79 36
4 100
4 101.6
17 432
17.13 435
17 432
14.96 380
11.81 300
159 72
5 125
5 127
20 508
20.12 511
20 508
18.11 460
11.81 300
216 98
6 150
6 152.4
22 559
22.13 562
22 559
20.47 520
12.6 320
311 141
8 200
8 203.2
26 660
26.1 663
26 660
22.83 580
12.6 320
540 245
10 250
10 254
31 787
31.1 790
31 787
24.41 620
13.78 350
728 330
12 300
12 304.8
33 838
33.11 841
33 838
26.77 680
14.96 380
1135 515
14 350
14 336.6
35 889
35.12 892
35 889
29.92 760
17.71 450
1565 710
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4. 2. For more dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Sleeve Type) ASME CLASS 600 (PN 100)
9
PLUG VALVE
OVERVIEW (Pressure Balance Type)
STANDARDS
Design & manufacture API 599, API 6D, ISO 14313,
Face-to-face API 6D, ASME B16.10
End Dimension ASME B16.5 (RF, RTJ),ASME B16.47 (RF,RTJ) MSS SP-44 (NPS 22 Only) ASME B1.20.1 (NPT) ASME B16.11 (SW) ASME B16.25 (BW)
Test & inspection API 6D, API 598
Fire safe API 6FA, API 607
Other NACE MR 01-75, MR 0103
TYPICAL MATERIALS
Body/Bonnet (Forging, for NPS ≤ 2)A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5 (Casting)A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2, Monel, Inconel, Hastelloy
Plug CA15+Nitrding, CS+ENP, A182 F304, F304L, F316, F316L, F51, F53, CS+TCC, CS+Ni60
Stem A182 F6a, F316, F51, A105+ENP, AISI 4140+ENP, 17-4PH
Packing Graphite, PTFE, RPTFE
O-ring Viton, NBR, HNBR, AFLAS
8 7 5 4 2 1 3 6
9
11
10
14
13
12
15
16
17
18
19
20 21 22
23 24
1
2
3
4
5
6
7
8
9
11
12
13
14
Bonnet
Bolt
Leg
Hex.Bolt
Nut
Support Plate
Stud
Diaphragm
Check Valve
Body
Adapter
Thrust Washer
Stem
10
Plug
15 O-ring
16
17
19
20
21
22
18
23
24 Packing
Packing Plate
Screw
Stud
Nut
Spring Washer
Gear
Grease Fitting
Lever
10
PLUG VALVE
DIMENSIONS AND WEIGHTS(Pressure Balance Type) ASME CLASS 150 (PN 20)
ASME CLASS 150 (PN 20)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
5.51 140
- 5.98 152
7.09 180
15.75 400
31 14
¾ 20
0.75 19.1
5.51 140
- 7 178
7.09 180
15.75 400
35 16
1 25
1 25.4
5.51 140
5.51 140
8 203
7.28 185
19.69 500
40 18
1 ¼ 32
1.25 31.8
5.51 140
6.02 153
8.5 216
7.87 200
19.69 500
44 20
1 ½ 40
1.5 38.1
6.5 165
7 178
9 229
8.27 210
23.62 600
53 24
2 50
2 50.8
7 178
7.5 191
10.51 267
8.46 215
32.28 820
64 29
2 ½ 65
2.5 63.5
7.5 191
8 203
12 305
9.84 250
39.37 1000
77 35
3 80
3 76.2
8 203
8.5 216
13 330
10.63 270
39.37 1000
104 47
4 100
4 101.6
9 229
9.5 241
14 356
11.81 300
11.81 300
201 91
5 125
5 127
10 254
10.6 269
15 381
14.39 340
11.81 300
284 129
6 150
6 152.4
10.5 267
11 279
18 457
14.37 365
12.6 320
463 210
8 200
8 203.2
11.5 292
12 305
20.5 521
15.75 400
12.6 320
705 320
10 250
10 254
13 330
13.5 343
22 559
17.71 450
13.78 350
1455 660
12 300
12 304.8
14 356
14.5 368
25 635
20.08 510
14.96 380
2028 920
14 350
14 336.6
16 406
16.5 419
27 686
23.23 590
14.96 380
2756 1250
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4. 2. For more dimensional information, please contact our sales representative.
11
PLUG VALVE
DIMENSIONS AND WEIGHTS(Pressure Balance Type) ASME CLASS 300 (PN 50)
ASME CLASS 300 (PN 50)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
5.51 140
5.94 151
6 152
7.09 180
15.75 400
26 12
¾ 20
0.75 19.1
6 152
6.5 165
7 178
7.09 180
15.75 400
31 14
1 25
1 25.4
6.5 165
7 178
8 203
7.28 185
19.69 500
35 16
1 ¼ 32
1.25 31.8
7 178
7.52 191
8.5 216
7.87 200
19.69 500
42 19
1 ½ 40
1.5 38.1
7.48 190
8 203
9 229
8.27 210
23.62 600
46 21
2 50
2 50.8
8.5 216
9.13 232
10.51 267
8.46 215
32.28 820
53 24
2 ½ 65
2.5 63.5
9.5 241
10.12 257
12 305
9.84 250
39.37 1000
68 31
3 80
3 76.2
11.1 282
11.73 298
13 330
10.63 270
39.37 1000
79 36
4 100
4 101.6
12 305
12.64 321
14 356
11.81 300
11.81 300
134 61
5 125
5 127
15 381
15.63 397
15 381
14.39 340
11.81 300
190 86
6 150
6 152.4
15.87 403
16.5 419
18 457
14.37 365
12.6 320
287 130
8 200
8 203.2
16.5 419
17.12 438
20.51 521
15.75 400
12.6 320
419 190
10 250
10 254
18 457
18.6 473
22 559
17.71 450
13.78 350
562 255
12 300
12 304.8
19.76 502
20.39 518
25 635
20.08 510
14.96 380
838 380
14 350
14 336.6
30 762
30.63 778
30 762
23.23 590
14.96 380
1235 560
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4. 2. For more dimensional information, please contact our sales representative.
12
PLUG VALVE
DIMENSIONS AND WEIGHTS (Pressure Balance Type) ASME CLASS 600 (PN 100)
ASME CLASS 600 (PN 100)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
6.5 165
6.42 163
6.5 165
7.09 180
15.75 400
31 14
¾ 20
0.75 19.1
7.48 190
7.48 190
7.48 190
7.09 180
15.75 400
35 16
1 25
1 25.4
8.5 216
8.5 216
8.5 216
7.28 185
19.69 500
40 18
1 ¼ 32
1.25 31.8
9 229
9 229
9 229
7.87 200
19.69 500
44 20
1 ½ 40
1.5 38.1
9.49 241
9.49 241
9.49 241
8.27 210
23.62 600
53 24
2 50
2 50.8
11.5 292
11.61 295
11.5 292
8.46 215
32.28 820
64 29
2 ½ 65
2.5 63.5
13 330
13.11 333
13 330
9.84 250
39.37 1000
77 35
3 80
3 76.2
14 356
14.13 359
14 356
10.63 270
39.37 1000
104 47
4 100
4 101.6
17 432
17.13 435
17 432
11.81 300
11.81 300
201 91
5 125
5 127
20 508
20.12 511
20 508
14.39 340
11.81 300
284 129
6 150
6 152.4
22 559
22.13 562
22 559
14.37 365
12.6 320
463 210
8 200
8 203.2
26 660
26.1 663
26 660
15.75 400
12.6 320
705 320
10 250
10 254
31 787
31.1 790
31 787
17.71 450
13.78 350
1455 660
12 300
12 304.8
33 838
33.11 841
33 838
20.08 510
14.96 380
2028 920
14 350
14 336.6
35 889
35.12 892
35 889
23.23 590
14.96 380
2756 1250
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4. 2. For more dimensional information, please contact our sales representative.
13
PLUG VALVE
DIMENSIONS AND WEIGHTS(Pressure Balance Type) ASME CLASS 900 (PN 150)
ASME CLASS 900 (PN 150)
Size in/mm
D L
H W Weight
RF RTJ BW RF/RTJ (lb/kg)
½ 15
0.5 12.7
8.5 216
8.5 216
9.02 229
7.09 180
15.75 400
37 17
¾ 20
0.69 17.5
9.02 229
9 229
9.02 229
7.09 180
15.75 400
42 19
1 25
0.87 22.1
10 254
10 25.4
10 254
7.28 185
19.69 500
46 21
1 ¼ 32
1.19 28.4
10.98 279
11 279
10.98 279
7.87 200
19.69 500
53 24
1 ½ 40
1.37 34.8
12 305
12 305
12 305
8.27 210
23.62 600
66 30
2 50
1.87 47.5
14.49 368
14.61 371
14.49 368
8.46 215
32.28 820
82 37
2 ½ 65
2.25 57.2
16.5 419
16.61 422
16.5 419
9.84 250
39.37 1000
97 44
3 80
2.87 72.9
15 381
15.12 384
15 381
10.63 270
39.37 1000
143 65
4 100
3.87 98.3
18 457
18.11 460
18 457
11.81 300
11.81 300
243 110
5 125
4.75 120.7
22 559
22.12 562
22 559
14.39 340
11.81 300
353 160
6 150
5.75 146.1
24 610
24.13 613
24 610
14.37 365
12.6 320
562 255
8 200
7.5 190.5
29 737
29.13 740
29 737
15.75 400
12.6 320
838 380
10 250
9.37 238
33 838
33.11 841
33 838
17.71 450
13.78 350
1786 810
12 300
11.12 282.4
38 965
38.11 968
38 965
20.08 510
14.96 380
2315 1050
14 350
12.25 311.2
40.51 1029
40.91 1039
40.51 1029
23.23 590
14.96 380
3219 1460
The dimension and weights are for reference only and subject to change without notice. 1. "W" is the O.D. of the handwheel for NPS 4 and above, and length of lever/wrench for NPS ≤ 4. 2. For more dimensional information, please contact our sales representative.
14
PLUG VALVE
SEAT AND SEAL MATERIAL SELECTION GUIDE
SEAT MATERIALS
Material Name
Description Operating Temperature
Operating Pressure Service Application
PTFE Virgin PTFE is the most widely used sealing material with excellent characteristics suitable for most services. It has excellent chemical resistance throughout valve industries and low coefficient of frication.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
General chemicals, low pressure services.
RPTFE RPTFE (Reinforced PTFE) is typically produced by adding 15% fiber glass to virgin PTFE. It has better pressure-temperature properties than virgin PTFE, better resistance to wear and deformation under load. NOT to be used in hydrofluroic acid
-112oF – 248oF -80oC– 120oC
Class 150 – 600 PN 20 – 100
For low and medium pressure services.
PCTFE PCTFE is a homopolymer of chlorotrifluoroethylene, featuring high compressive strength and low deformation under load.
-320oF – 248oF -196oC– 120oC
Class 150 – 300 PN 20 – 50
For low temperature low pressure services.
Nylon 6 Nylon is a common seat material for Class 600 valves. It is highly resistance to many chemicals and abrasions, and can be used in air, oil and other gas media. It is NOT suitable for strong oxidization agents.
-22oF – 176oF -30oC– 80oC
Class 150 –1500 PN 20 –250
For high pressure, low temperature services.
Devlon® Devlon® is a high molecular weight polyamide that is specifically tailored for high temperature/pressure applications in the offshore oil and gas sector.It is low moisture absorption.
-50oF – 302oF -46oC– 150oC
Class 150 –1500 PN 20 –250
For high pressure high temperature offshore services.
Nylon+MoS2 Molon (Nylon+MoS2) is a modified Nylon, the characteristics are similar to Devlon with it is cheaper than Devlon.
-20oF – 266oF -29oC– 130oC
Class 150 – 1500 PN 20 – 250
For high pressure, low temperature services.
PEEK PEEK is a high performance engineered thermoplastic. It is excellent in water/chemical resistance andit is unaffected by continuous exposure to hot water/steam
-148oF – 500oF -100oC– 260oC
Class 150 – 2500 PN 20 – 420
For high pressure high temperature services.
PPL PPL (Polyparaphenylene) is an excellent seat material with low coefficient of friction, highly resistant to pressure and temperature.
-50oF –482oF -46oC– 250oC
Class 150 – 300 PN 20 – 50
For high temperature low pressure services.
Delrin® Delrin® (Acetal Resin) possesses high tensile strength, creep resistance and toughness. It exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals.DO NOT use it on oxygen service or steam.
-50oF –194oF -46oC– 90oC
Class 150 – 600 PN 20 –100
For extreme pressure services.
TFM TFM (modified PTFE) is a chemically modified PTFE that offers enhanced properties while retaining all the proven advantages of a conventional PTFE.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
For services requiring high purity.
Metal Metal (typically stellite) seats are used in severe conditions where flashing, hydraulic shock, abrasive media or trapped metal may exist in the line.
Varies Varies For severe services.
O-RING MATERIALS
Material Name Description Operating Temperature
Operating Pressure
NBR Buna-N (NBR) is an all purpose polymer with good resistance to water, solvents, oil and hydraulic fluids.
-50oF –176oF -46oC– 80oC
Class 150 – 600 PN 20 –100
HNBR HNBR (Hydrogenated NBR) has similar media stability to NBR but with significantly better heat and oxidization stability.
-67oF – 337oF -55oC–170oC
Class 150 – 600 PN 20 – 100
Viton Viton (fluorocarbon) is a fluorocarbon elastomer that is compatible with a broad range of chemicals. It performs well in mineral acids, salt solutions, chlorinated hydrocarbons and petroleum oils
-49oF – 320oF -22oC– 204oC
Class 150 – 600 PN 20 – 100
EPDM EPDM has good abrasion and tear resistance with excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oil, strong acids and strong alkalines and should not be used in compressed air lines.
-50oF – 302oF -46oC– 150oC
Class 150 – 600 PN 20 – 100
FVMQ Fluorosilcione is a silicone polymer chain with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone.
-50oF – 320oF -46oC– 177oC
Class 150 – 600 PN 20 – 100
AFLAS® AFLAS® is highly resistant to a wide range of chemicals
-49oF – 428oF -29oC– 220oC
Class 150 – 600 PN 20 – 100
Seat Material Pressure-Temperature Rating (Operating)
15
PLUG VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
G e.g.
Nominal Size
A
1 6
Valve Type
B
P L
Pressure Rating
C
6
End Conn.
D
R
Construct-ion
E
1
Body Material
F
C 4
Trim Material
G
1 0
Seat
H
M
O-ring
I
1
is a NPS 16 Class 600, Plug Valve, RF flanged, Pressure Balanced Type, A216 WCB body, SS316 Trim, Metal Seat, Viton O-ring, Gear Operated.
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
B Valve Type
PL Plug Valve
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125
4 Class 400
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
E Construction
0 Special
1 Pressure Balanced
2 Sleeved Type
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 C F8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
I O-Ring
0 None
1 Viton
2 Teflon
3 HNBR
4 NBR
5 Special
6 EPDM
7 FVMQ
8 FFKM
9 AFLAS
B Bare Stem
L Lever
G Gearbox
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
S Solid Lever
D Lever with locking device
R Solid lever with locking device
J Operation G Trim Material
00 Special
01 13Cr/13Cr
02 304/304
03 304L/304L
04 316/316
05 316L/316L
06 STL/304
07 STL/316
G Seat
X Special
T PTFE
M Metal
16
PLUG VALVE
VALVE FIGURE NUMBER (CONT’D) HOW TO ORDER
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left
while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the
specification of the valve is not listed, select the code for “Special “. The total length of the figure number shall be
exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which
means eliminating “Specials”. If you don’t have enough specification or information about the valve you are
ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.
BUTTERFLY VALVE
BU-1601C(EN)
MISSION STATEMENT
We at FBV, Inc. commit to taking ACTION:
Adopt the latest technology to take the product quality to the next level;
Consistently provide on-time services to our customers;
Train and develop talented people with strong work ethics to deliver effective
performance;
Improve and enhance engineering designs to ensure product performance;
Optimize management systems and increase productivity;
Never forget our customer and employee needs.
ABOUT US
FBV Inc. is an ISO 9001 certified company specializing in manufacturing industrial valves
including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves in
carbon steel, stainless steel, duplex stainless and alloy materials. Our products conform to the
latest industry standards in accordance to ANSI, ASME and API.
FBV today has over 600,000 square feet of manufacturing facilities. Through its conviction to
provide only the finest quality products and services to match the need of our customers, FBV
has now established itself as a serious player in the valve business.
FBV INC has sold worldwide in North America, Europe, South America, South Asia, Africa and
the Middle East. We consider product quality and customer satisfaction as our highest priority.
We look forward to new customer relationships by providing value, quality, customer service,
honesty, integrity and the commitment to maintain product consistency with each and every
order.
1
BUTTERFLY VALVE
TABLE OF INDEX PAGE
Introduction, Features 3
Scope of Products, 4
Overview Triple Offset Type 5-6
Dimensions and Weights 7
Class 150 (PN 20) 7-8
Class 300 (PN 50) 9
Class 600 (PN 100) 10
Class 900 /1500(PN 150/250) 10-11
Flow-Coefficient CV Value (Triple Offset Type) 12
Overview Concentric Lining Type 13
Dimensions and Weights 14
Class 150 (PN 20) 14
Flow-Coefficient CV Value(Concentric Lining Type) 15
Seat and Seal Material, Selection Guide 16
Valve Figure Number, How To Order 17-18
2
BUTTERFLY VALVE
This page is intentionally left blank.
3
BUTTERFLY VALVE
INTRODUCTION FEATURES
INTRODUCTION
Butterfly valve uses a stem through an approximate
circular plate of the disc and the valve stem rotation to
drive the rotation of the disc, in order to control the
effect of fluid switch.
FBV produces triple offset metal sealing and concentric
Lining butterfly valve.
Concentric Lining Butterfly Valve
Concentric Lining butterfly valve adopts lining on all the
parts that contact with medium inside of body, the
stainless steel which is resistance of corrosion is used as
stem and disc to ensure the corrosion resistance of
different strong corrosive medium.
The valve body and disc materials can be made of cast
iron, carbon steel or stainless steel to ensure the
bearing strength. Many kinds of soft sealing material
such as NBR, EPDM or PTFE etc can be used as lining
material to adapt to different corrosive medium or
working temperature.
Offset Metal Sealing Butterfly Valve
FBV Offset metal sealing butterfly valve uses the three
eccentric structure with multi-layer metal seal or pure
metal sealing ring, different sealing materials are being
used according to the different temperature request
from end user.
The structure of valve sealing ring that was formed
after machining for triple eccentric butterfly valve is
oblique cone type, the purpose of which is to let the
disc open in a subtle angle and seat sealing surface can
be completely separated from the sealing surface of
disc, thus to reduce the friction of sealing surface
during the open and close.
4
BUTTERFLY VALVE
SCOPE OF PRODUCTS
Legends: A –Triple Offset & Concentric Lining Type B–Available in Triple Offset Only
C–Available in Concentric Lining Type Only D– Not Usually Required
Size in/mm
Class 150 PN 20
Class 300 PN 50
Class 600 PN 100
Class 900 PN 150
Class 1500 PN 250
2 50 A B B B B
3 65 A B B B B
4 80
A B B B B
5 100
A,D B,D B,D B,D B,D
6 150
A B B B B
8 200
A B B B B
10 250 A B B B B
12 300 A B B B B
14 350
A B B B B
16 400
A B B B B
18 450
A B B B B
20 500
A B B B B
22 550 A,D B,D B,D B,D B,D
24 600 A B B B B
26 650
A B B B B
28 700
A,D B,D B,D B,D B,D
30 750
A B B B B
32 800
A,D B,D B,D B,D B,D
34 850 A,D B,D B,D B,D B,D
36 900 A B B B B
38 950
A,D B,D B,D B,D
40 1000
A B B B
42 1050
A B B B
48 1200
A B B B
56 1400 A B B B
60 1500 A B B B
1. Concentric Lining Butterfly valve is applicable to the pressure rating not higher than class 150, but not limit to CL150. CL125, CL75, PN10 and PN16 can be an option.
2. Above are the dimensions that normally used, contact our sales representative if any other sizes are requested.
5
BUTTERFLY VALVE
OVERVIEW (Triple Offset Type)
Part List
STANDARDS
Design & Manufacture API 609,ASME b16.34
Face-to-face API 609, ASME B16.10
End Dimension ASME B16.5 (RF, RTJ), ASME B16.47 (RF,RTJ) MSS SP-44 (NPS 22 Only) ASME B16.25 (BW)
Test & inspection API 598
TYPICAL MATERIALS
Body, Disc A216 WCB,A217 WC6, WC9, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A, A352 LCB, LCC, LC2, Monel, Inconel, Hastelloy (Casting)
Seat 13Cr/SS304/SS316+Composite materials, PTFE
Stem A276 410, 304, 316, F51, AISI 4140+ENP, 17-4PH
Packing Graphite, PTFE
O-ring NBR, HNBR,FKM
Typical Triple Offset Butterfly Valve
Wafer Type Lug Type Flange Type Butt Welding Type
1
3
2
4
5
7
8
9
6
12
13
10 11
Cover 1
Segment 2
Body 3
Stem 4
Seal Ring 5
Disc 6
Plate 7
Packing 8
Stud 9
Nut 10
Washer 11
Yoke 12
3 Gear 13
6
BUTTERFLY VALVE
OVERVIEW (Triple Offset Type)
Offset 1: Offset for seat seal and the rotation center of stem. Offset 2: Center of pipe and disc. Offset 3: Seat sealing angle center line and flow passage center. The triple offset of butterfly valve ensures the valve disc is completely separated from seat sealing surface while open in a slightly angle which could reduce the friction of sealing surface during open and close and opening torque as well as prolong the service life of the sealing surface.
FBV metal sealing butterfly valve adopts multi-layer sealing ring to achieve the valve seal, the multi-layer seal ring is generally made of stainless steel and graphite combination The pure metal sealing can be used for special medium or high temperature.
Disc Slightly open
Disc closed: Pure metal seat ring
Disc closed: Multi-layer metal seat ring
7
BUTTERFLY VALVE
ASME CLASS 150 (PN 20)
Size in/mm
D L
A B B1 Weight (lb/kg)
WAFER /LUG RF(1) BW WAFER LUG RF BW
2 50
2 50
1.69 43
4.25 108
- 4.33 110
7.87 200
13.78 350
18 8
22 10
31 14
2 ½ 65
2 ½ 65
1.81 46
4.41 112
- 4.92 125
8.46 215
14.37 365
20 9
24 11
35 16
3 80
3 80
1.89 48
4.5 114
7.09 180
5.12 130
8.86 225
14.76 375
22 10
26 12
40 18
33 15
4 100
4 100
2.13 54
5 127
7.48 190
5.71 145
9.45 240
15.35 390
26 12
40 18
51 23
44 20
6 150
6 150
2.24 57
5.51 140
8.27 210
6.89 175
11.42 290
17.32 440
33 15
53 24
70 32
55 25
8 200
8 200
2.52 64
5.98 152
9.06 230
9.65 245
13.39 340
19.29 490
66 30
99 45
106 48
108 49
10 250
10 250
2.8 71
6.5 165
9.84 250
11.02 280
14.76 375
20.67 525
104 47
150 68
194 88
156 71
12 300
12 300
3.19 81
7 178
10.63 270
12.4 315
16.73 425
22.64 575
174 79
220 100
282 128
229 104
14 350
14 350
3.62 92
7.48 190
11.42 290
13.78 350
17.91 455
24.41 620
185 84
267 121
348 158
317 144
16 400
16 400
4.02 102
8.5 216
12.2 310
14.96 380
19.5 495
27.56 700
308 140
385 175
491 223
396 180
18 450
18 450
4.5 114
8.74 222
13 330
15.55 395
20.08 510
29.13 740
412 187
500 227
630 286
511 232
20 500
20 500
5 127
9.02 229
13.78 350
17.13 435
22.05 560
32.09 815
500 227
577 262
744 338
599 272
24 600
24 600
6.06 154
10.51 267
15.35 390
19.5 495
25 635
34.06 865
782 355
782 355
1126 511
914 415
28 700
28 700
6.5 165
11.5 292
16.93 430
19.69 500
25.59 650
35.83 910
1156 525
1156 525
742 337
1333 605
32 800
32 800
7.48 190
12.52 318
18.5 470
21.65 550
28.15 715
39.57 1005
1542 700
1718 780
2562 1163
1586 720
36 900
36 900
8 203
13 330
20.08 510
24.8 630
32.09 815
42.70 1110
2379 1080
2313 1050
3450 1566
2048 930
40 1000
40 1000
8.5 216
16.14 410
21.65 550
26.77 680
34.65 880
47.24 1200
2907 1320
3458 1570
4692 2130
3678 1670
48 1200
48 1200
10 254
18.5 470
24.8 630
31.3 795
39.17 995
52.56 1335
4515 2050
5066 2300
7180 3260
5727 2600
56 1400
56 1400
15.35 390
20.87 530
- 35.43 900
45.47 1155
74.41 1890
6825 3100
7269 3300
10352 4700
8370 3800
1.The dimension and weights are for reference only and subject to change without notice. 2. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Triple Offset Type) ASME CLASS 150 (PN 20)
8
BUTTERFLY VALVE
ASME CLASS 150 (PN 20) Continue
DIMENSIONS AND WEIGHTS (Triple Offset Type) ASME CLASS 150 (PN 20)
Size in/mm
D L
A B B1 Weight (lb/kg)
WAFER /LUG RF(1) BW WAFER LUG RF BW
60 1500
60 1500
15.35 390
20.87 530
20.87 530
36.61 930
46.46 1180
75.6 1920
9251 4200
7489 3400
10573 4800
8590 3900
72 1800
72 1800
28.14 432
22.64 575
22.64 575
39.37 1000
51.18 1300
85.83 2180
12555 5700
11894 5400
14317 6500
11233 5100
76 1900
76 1900
15.95 456
24 610
24 610
45.67 1160
52.36 1330
92.52 2350
14537 6600
14978 6800
18282 8300
15859 7200
80 2000
80 2000
20.08 510
26.38 670
26.38 670
51.18 1300
55.12 1400
98.43 2500
15859 7200
16960 7700
19383 8800
16520 7500
9
BUTTERFLY VALVE
ASME CLASS 300 (PN 50)
Size in/mm
D L
A B B1 Weight (lb/kg)
WAFER/ LUG RF(1) BW WAFER LUG RF BW
2 50
2 50
1.69 43
5.91 150
- 4.53 115
7.87 200
13.98 355
26 12
29 13
31 14
2 ½ 65
2 ½ 65
1.81 46
6.69 170
- 4.92 125
9.84 250
14.57 370
29 13
31 14
37 17
3 80
3 80
1.89 48
7.09 180
7.09 180
5.31 135
9.06 230
14.96 380
31 14
35 16
44 20
37 17
4 100
4 100
2.13 54
7.48 190
7.48 190
6.1 155
10.04 255
15.75 400
44 20
51 23
66 30
55 25
6 150
6 150
2.32 59
8.27 210
8.27 210
8.46 215
13 330
18.11 460
93 42
99 45
128 58
110 50
8 200
8 200
2.87 73
9.06 230
9.06 230
9.84 250
14.57 370
19.69 500
132 60
145 66
181 82
156 71
10 250
10 250
3.27 83
9.84 250
9.84 250
11.42 290
16.73 425
21.26 540
242 110
264 120
322 146
286 130
12 300
12 300
3.62 92
10.63 270
10.63 270
12.8 325
17.91 455
23.23 590
300 136
326 148
577 262
352 160
14 350
14 350
4.61 117
11.42 290
11.42 290
14.17 360
19.69 500
25.20 640
427 194
467 212
771 350
502 228
16 400
16 400
5.24 133
12.20 310
12.2 310
14.37 365
21.26 540
28.35 720
581 264
630 286
907 412
678 308
18 450
18 450
5.87 149
13 330
13 330
15.55 395
20.08 510
29.13 740
617 280
722 328
1222 555
789 358
20 500
20 500
6.26 159
13.78 350
13.78 350
18.5 470
25.59 650
22.86 860
914 415
991 450
1674 760
1068 485
24 600
24 600
7.13 181
15.35 390
15.35 390
21.46 545
28.94 735
35.43 900
1198 544
1317 598
2610 1185
1346 652
28 700
28 700
9.02 229
16.93 430
16.93 430
21.65 550
30.71 780
35.83 910
1861 845
2037 925
3282 1490
2236 1015
32 800
32 800
9.5 241
18.5 470
18.5 470
24.8 630
33.66 855
41.34 1050
2621 1190
2885 1310
3678 1670
3150 1430
36 900
36 900
9.5 241
20.08 510
20.08 510
26.97 685
35.83 910
45.28 1150
3797 1724
4137 1878
5154 2340
4471 2030
40 1000
40 1000
11.81 300
21.65 550
21.65 550
30.71 780
39.37 1000
49.61 1260
5339 2424
5790 2628
7137 3240
6238 2832
48 1200
48 1200
14.17 360
24.8 630
21.8 630
34.45 875
44.88 1140
55.12 1400
6436 2922
7070 3210
8998 4085
7700 3496
1. The dimension and weights are for reference only and subject to change without notice. 2. For more size or dimensional information, please contact our sales representative.
DIMENSIONS AND WEIGHTS (Triple Offset Type) ASME CLASS 300 (PN 50)
10
BUTTERFLY VALVE
ASME CLASS 600 (PN 100)
Size in/mm
D L
A B B1 Weight (lb/kg)
WAFER / LUG RF BW WAFER LUG RF BW
6 150
6 150
3.07 78
8.27 210
8.27 210
9.84 250
13.98 355
21.46 545
163 74
178 81
229 104
196 89
8 200
8 200
4.02 102
9.06 230
9.06 230
11.42 290
16.14 410
24.41 620
295 134
383 174
405 184
350 159
10 250
10 250
4.49 114
9.84 250
9.84 250
13.19 335
17.91 455
26.38 670
478 217
524 238
661 300
568 258
12 300
12 300
5.51 140
10.63 270
10.63 270
14.96 380
20.87 530
29.92 760
645 293
705 320
870 395
762 346
14 350
14 350
6.10 155
11.42 290
11.42 290
15.35 390
21.65 550
30.32 770
722 328
793 360
1007 457
866 393
16 400
16 400
7.01 178
12.20 310
12.20 310
17.52 445
24.61 625
35.04 890
1046 475
1145 520
1443 655
1244 565
18 450
18 450
7.87 200
13 330
13 330
18.7 475
26.18 665
38.19 970
1247 566
1374 624
1756 797
1502 682
20 500
20 500
8.5 216
13.78 350
13.78 350
20.47 520
28.15 715
39.76 1010
1297 816
1963 891
2454 1114
2126 965
24 600
24 600
9.13 232
15.35 390
15.35 390
23.03 585
32.09 815
45.28 1150
2529 1148
2780 1262
3524 1600
3029 1375
ASME CLASS 900 (PN 150)
Size in/mm
D L
A B B1 Weight(lb/kg)
WAFER / UG RF BW WAFER LUG RF BW
6 150
6 150
4.02 102
10.51 267
10.51 267
10.63 270
15.75 400
25.98 660
196 89
269 122
341 155
264 120
8 200
8 200
5.51 140
11.5 292
11.5 292
12.4 315
19.69 500
29.53 750
414 188
449 204
555 252
485 220
10 250
10 250
6.1 155
13 330
13 330
14.37 365
19.88 505
31.5 800
513 233
566 257
720 327
617 280
12 300
12 300
7 178
14.02 356
14.02 356
15.75 400
22.83 580
35.83 910
740 336
815 370
1035 470
888 403
14 350
14 350
11.42 290
15 381
15 381
16.54 420
23.62 600
36.61 930
978 444
1064 483
1328 603
1101 500
16 400
16 400
12.2 310
15.98 406
15.98 406
17.91 455
27.17 630
38.98 990
1134 515
1222 555
1553 705
1300 590
18 450
18 450
13 330
17 432
17 432
19.88 505
27.17 690
41.93 1065
1753 796
1910 867
2379 1080
2048 930
20 500
20 500
13.78 350
18 457
18 457
21.06 535
28.74 730
42.5 1105
2220 1008
2416 1097
3007 1365
2599 1180
24 600
24 600
13.78 350
20 508
20 508
24.41 620
33.07 840
48.03 1220
3916 1778
4295 1950
5425 2463
4626 2100
The dimension and weights are for reference only and subject to change without notice.
DIMENSIONS AND WEIGHTS (Triple Offset Type) ASME CLASS 600/900 (PN 100/150)
11
BUTTERFLY VALVE
ASME CLASS 1500 (PN 250)
Size in/mm
D L
A B B1 Weight (lb/kg)
WAFER / UG RF BW WAFER LUG RF BW
8 200
8 200
8.27 210
12.2 310
12.2 310
13.78 350
14.17 360
22.05 560
520 236
427 194
654 297
507 230
10 250
10 250
9.06 230
14.57 370
14.57 370
15.75 400
18.5 470
26.38 670
835 379
683 310
1066 484
881 400
12 300
12 300
10.63 270
16.14 410
16.14 410
17.72 450
20.47 520
30.71 780
1273 578
1040 472
1626 738
1344 610
14 350
14 350
11.42 290
17.72 450
17.72 450
18.9 480
24.41 620
32.68 830
1579 717
1267 575
2048 930
1498 680
16 400
16 400
13 330
19.3 490
19.3 490
21.26 540
27.56 700
36.22 920
2500 1135
1993 905
3249 1475
2599 1180
18 450
18 450
23.78 350
20.87 530
20.87 530
22.83 580
28.35 720
38.19 970
3011 1367
2445 1110
3859 1752
3194 1450
20 500
20 500
14.57 370
22.44 570
22.44 570
24 610
31.5 800
41.34 1050
4163 1890
5650 2565
5242 2380
4515 2050
24 600
24 600
16.14 410
25.6 650
25.6 650
27.56 700
49.21 1250
63 1600
6108 2773
6108 2723
7659 3477
6806 3090
The dimension and weights are for reference only and subject to change without notice.
DIMENSIONS AND WEIGHTS (Triple Offset Type) ASME CLASS 1500 (PN 250)
12
BUTTERFLY VALVE
FLOW COEFFICIENT CV VALUE Triple Offset Type
Class 150 (PN 20)
Class 300 (PN 50) Size
In mm
Disc Opening Angle Size In
mm
Disc Opening Angle
10° 20° 30° 40° 50° 60° 70° 80° 90° 10° 20° 30° 40° 50° 60° 70° 80° 90°
3 80
5 11 17 22 33 50 72 99 110 3
80 5 11 17 22 33 50 72 99 110
4 100
12 25 38 50 76 113 164 227 252 4
100 12 25 38 50 76 113 164 227 252
6 150
44 96 142 191 287 430 621 860 956 6
150 35 77 116 154 231 347 502 694 772
8 200
75 163 244 326 488 733 1058 1465 1628 8
200 68 148 222 296 444 666 962 1332 1480
10 250
124 270 405 541 811 1216 1757 2433 2703 10
250 110 238 357 476 715 1072 1548 2144 2382
12 300
249 542 813 1084 1627 2440 3524 4880 5422 12
300 164 355 533 711 1066 1600 2310 3199 3555
14 350
287 624 936 1247 1871 2807 4054 5613 6237 14
350 217 472 708 945 1417 2125 3070 4251 4723
16 400
380 826 1239 1652 2478 3717 5368 7433 8259 16
400 306 665 998 1330 1995 2993 4323 5985 6650
18 450
482 1049 1573 2097 3146 4719 6817 9438 10487 18
450 396 861 1291 1722 2582 3874 5595 7747 8608
20 500
556 1209 1814 2419 3628 5442 7860 10884 12093 20
500 486 1056 1584 2112 3168 4752 6864 9504 10560
24 600
839 1825 2737 3650 5474 8212 11861 16423 18248 24
600 775 1685 2528 3370 5055 7583 10953 15165 16850
28 700
1371 2980 4470 5960 8940 13410 19370 26820 29800 28
700 1118 2430 3645 4860 7290 10935 15795 21870 24300
30 750
1642 3570 5355 7140 10710 16065 23205 32130 35700 30
750 1426 3100 4650 6200 9300 13950 20150 27900 31000
32 800
1886 4100 6450 8200 12300 18450 26650 36900 41000 32
800 1546 3360 5040 6720 10080 15120 21840 30240 33600
36 900
2466 5360 8040 10720 16080 24120 34840 48240 53600 36
900 1969 4280 6420 8560 12840 19260 27820 38520 42800
40 1000
3031 6590 9885 13180 19770 29655 42835 59310 65900 40
1000 2420 5260 7890 10520 15780 23670 24190 47340 52600
42 1050
3307 7190 10785 14380 21570 32355 46735 64710 71900
48 1200
4476 9730 14955 19460 21919 43785 63245 87570 97300
Class 600 (PN 100)
+
CALCULATION OF FLOW COEFFICIENT Size
In mm
Disc Opening Angle Flow coefficient Cv (Kv is the metric equivalent) is the rate of flow in gallon per minute with the pressure drop of 1 psi across the valve. The flow coefficients shown in the above table are determined with equations as follows: For liquids:
𝐐𝐥 = 𝐂𝐯 𝚫𝐏 𝐒𝐆 𝟏/𝟐 Where: Ql = Flow of liquid (gallon/minute) ΔP = Pressure drop in psi (P1-P2) SG = Specific gravity (1 for liquid) For gases (non-critical):
𝐐𝐠 = 𝟔𝟏 ∙ 𝐂𝐯 𝐏𝟐 ∙ 𝐏𝟏 ∕ 𝐒𝐆 𝟏/𝟐 Where: Qg = Flow of gases (SFH at STP) P2 = Outlet pressure (psi) P1 = Inlet pressure (psi) SG = Specific gravity (1 for gas)
10° 20° 30° 40° 50° 60° 70° 80° 90°
3 80
5 11 17 22 33 50 72 99 110
4 100
12 25 38 50 76 113 164 227 252
6 150
44 96 142 191 287 430 621 860 956
8 200
75 163 244 326 488 733 1058 1465 1628
10 250
124 270 405 541 811 1216 1757 2433 2703
12 300
249 542 813 1084 1627 2440 3524 4880 5422
14 350
287 624 936 1247 1871 2807 4054 5613 6237
16 400
380 826 1239 1652 2478 3717 5368 7433 8259
18 450
482 1049 1573 2097 3146 4719 6817 9438 10487
20 500
556 1209 1814 2419 3628 5442 7860 10884 12093
24 600
839 1825 2737 3650 5474 8212 11861 16423 18248
13
BUTTERFLY VALVE
OVERVIEW (Concentric Lining Type)
Part List
STANDARDS
Design & Manufacture API 609,AWWA C504, ASME b16.34
Face-to-face API 609, ASME B16.10
End Dimension ASME B16.5 (RF) ASME B16.47 (RF) MSS SP-44 (NPS 22 Only) AWWA A207
Test & inspection API 598
TYPICAL MATERIALS
Body Cast iron, A216 WCB, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A,Monel, Inconel, Hastelloy
Disc Cast Iron+ENP, Carbon steel +ENP, A351 CF3, CF8, CF3M, CF8M, A995 4A, 5A,Monel, Inconel, Hastelloy
Lining NBR, HNBR, EPDM,FKM, PTFE
Stem A276 410, 304, 316, F51, AISI 4140+ENP, 17-4PH
Packing NBR, HNBR, PTFE
O-ring NBR, HNBR, FKM
Typical Concentric Lining Type Butterfly Valve
Wafer Type, Rubber Liner
Wafer Type, PTFE Liner
Lug Type, Rubber Liner
Double Flange Type, Rubber Liner
Mono-Flange Type Rubber Liner
Rubber Concentric lined valve can be Bonded or Replaceable Liner.
1
3
2
4
5
7
2
6
3
8
Body 1
Bushing 2
O-ring 3
Lining 4
Stem 5
Disc 6
Pin 7
Gear 8
14
BUTTERFLY VALVE
DIMENSIONS AND WEIGHTS (Concentric Lining Type) ASME CLASS 150 (PN 20)
ASME CLASS 150 (PN 20)
Size in/mm
D L
A B B1 Weight (lb/kg)
WAFER / LUG RF WAFER RF
2 50
1.97 50
1.69 43
4.25 108
3.27 83
4.72 120
8.66 220
11.45 5.2
25 11.2
2 ½ 65
2.52 64
1.81 46
4.41 112
3.66 93
5.12 130
13 330
12.11 5.5
29 13.3
3 80
3 76
1.89 48
4.49 114
3.94 100
9.65 245
13.98 355
13.22 6
31 14.2
4 100
3.94 100
2.05 52
5 127
4.5 114
6.1 155
10.63 270
15.42 7
38 17.4
6 150
5.91 150
2.2 56
5.51 140
5.63 143
7.48 190
11.81 300
24.23 11
56 25.5
8 200
7.87 200
2.36 60
5.98 152
6.69 170
8.07 205
12.6 320
39.65 18
87 39.5
10 250
9.84 250
2.68 68
6.5 165
7.8 198
9.25 235
15.75 400
52.86 24
117 53
12 300
11.81 300
3.07 78
7.01 178
8.78 223
11.02 280
17.72 450
74.89 34
148 67
14 350
13.11 333
3.07 78
7.48 190
11.02 280
12.2 310
19.69 500
101.32 46
200 91
16 400
15.31 389
4.02 102
8.5 216
11.81 300
13.39 340
20.87 530
191.63 87
311 141
18 450
17.05 433
4.5 114
8.74 222
13.58 345
14.76 375
22.83 580
226.87 103
401 182
20 500
19.33 491
5 127
9.02 229
19.98 355
16.93 430
24.8 630
323.79 147
441 200
24 600
23.31 592
6.06 154
10.5 267
16.14 410
19.69 500
30.71 780
482.38 219
639 290
28 700
27.36 695
6.5 165
11.5 292
18.82 478
22.05 560
31.5 800
742.29 337
943 428
32 800
31.26 794
7.48 190
12.52 318
20.83 529
24.41 620
31.89 810
909.69 413
1244 565
36 900
34.02 864
7.87 200
13 330
23 584
26.18 665
33.86 860
1612.33 732
1758 798
40 1000
38 965
9.88 251
16.14 410
24.5 622
28.94 735
36.22 920
1911.89 868
2026 920
48 1200
45.67 1160
10.87 276
18.5 470
31.5 800
36.10 917
43.7 1110
2246.7 1020
3084 1400
56 1400
54.84 1393
15.35 390
20.87 530
36.22 920
48.43 1230
59.06 1500
4075 1850
4405 2000
1. The dimension and weights are for reference only and subject to change without notice. 2. The outline dimension for pressure rating PN16 is equal to dimension for class 150 as described above. 3. For more dimensional information, please contact our sales representative.
15
BUTTERFLY VALVE
FLOW COEFFICIENT CV VALUE Concentric Lining Type
Class 150 (PN 20)
Size In
mm
Disc Opening Angle
10° 20° 30° 40° 50° 60° 70° 80° 90°
Full open
2 50
0.1 5 12 24 45 64 90 125 135
2 1/2 65
0.2 8 20 37 65 98 144 204 220
3 80
0.3 12 22 39 70 116 183 275 302
4 100
0.5 17 36 78 139 230 364 546 600
5 125
0.8 29 61 133 237 292 320 930 1022
6 150
2 45 95 205 366 605 958 1437 1579
8 200
3 89 188 408 727 1202 1903 2854 3136
10 250
4 151 320 694 1237 2047 3240 4859 5340
12 300
5 234 495 1072 1911 3162 5005 7507 8250
14 350
6 338 715 1549 2761 4568 7230 10844 11917
16 400
8 464 983 2130 3797 6282 9942 14913 16388
18 450
11 615 1302 2822 5028 8320 13168 19752 21705
20 500
14 971 1674 3628 6465 10698 16931 25396 27908
24 600
22 1222 2857 5605 9989 16528 26157 29236 43116
28 700
30 1633 3522 7630 12599 20036 30482 46899 58696
32 800
45 2387 4791 8736 13786 20613 31395 48117 68250
36 900
60 3021 6063 11055 17449 26086 39731 60895 86375
40 1000
84 4183 8395 15307 24159 36166 55084 84425 119750
48 1200
102 4651 10365 17010 27242 43853 70431 108968 132888
60 1500
148 6400 14500 24500 39400 63200 102000 154000 190000
72 1800
190 8220 18600 31500 50700 81200 131000 198000 244000
16
BUTTERFLY VALVE
SEAT AND SEAL MATERIAL SELECTION GUIDE
SEAT MATERIALS
Material Name
Description Operating Temperature
Operating Pressure Service Application
PTFE Virgin PTFE is the most widely used sealing material with excellent characteristics suitable for most services. It has excellent chemical resistance throughout valve industries and low coefficient of frication.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
General chemicals, low pressure services.
RPTFE
RPTFE (Reinforced PTFE) is typically produced by adding 15% fiber glass to virgin PTFE. It has better pressure-temperature properties than virgin PTFE, better resistance to wear and deformation under load. NOT to be used in hydrofluroic acid
-112oF – 248oF -80oC– 120oC
Class 150 – 600 PN 20 – 100
For low and medium pressure services.
PCTFE PCTFE is a homopolymer of chlorotrifluoroethylene, featuring high compressive strength and low deformation under load.
-320oF – 248oF -196oC– 120oC
Class 150 – 300 PN 20 – 50
For low temperature low pressure services.
Nylon 6 Nylon is a common seat material for Class 600 valves. It is highly resistance to many chemicals and abrasions, and can be used in air, oil and other gas media. It is NOT suitable for strong oxidization agents.
-22oF – 176oF -30oC– 80oC
Class 150 –1500 PN 20 –250
For high pressure, low temperature services.
Devlon® Devlon® is a high molecular weight polyamide that is specifically tailored for high temperature/pressure applications in the offshore oil and gas sector. It is low moisture absorption.
-50oF – 302oF -46oC– 150oC
Class 150 –1500 PN 20 –250
For high pressure high temperature offshore services.
Nylon+MoS2 Molon (Nylon+MoS2) is a modified Nylon, the characteristics are similar to Devlon with it is cheaper than Devlon.
-20oF – 266oF -29oC– 130oC
Class 150 – 1500 PN 20 – 250
For high pressure, low temperature services.
PEEK PEEK is a high performance engineered thermoplastic. It is excellent in water/chemical resistance andit is unaffected by continuous exposure to hot water/steam
-148oF – 500oF -100oC– 260oC
Class 150 – 2500 PN 20 – 420
For high pressure high temperature services.
PPL PPL (Polyparaphenylene) is an excellent seat material with low coefficient of friction, highly resistant to pressure and temperature.
-50oF –482oF -46oC– 250oC
Class 150 – 300 PN 20 – 50
For high temperature low pressure services.
Delrin®
Delrin® (Acetal Resin) possesses high tensile strength, creep resistance and toughness. It exhibits low moisture absorption. It is chemically resistant to hydrocarbons, solvents and neutral chemicals.DO NOT use it on oxygen service or steam.
-50oF –194oF -46oC– 90oC
Class 150 – 600 PN 20 –100
For extreme pressure services.
TFM TFM (modified PTFE) is a chemically modified PTFE that offers enhanced properties while retaining all the proven advantages of a conventional PTFE.
-112oF – 248oF -80oC– 120oC
Class 150 PN 20
For services requiring high purity.
Metal Metal (typically stellite) seats are used in severe conditions where flashing, hydraulic shock, abrasive media or trapped metal may exist in the line.
Varies Varies For severe services.
O-RING MATERIALS
Material Name Description Operating Temperature
Operating Pressure
NBR Buna-N (NBR) is an all purpose polymer with good resistance to water, solvents, oil and hydraulic fluids.
-50oF –176oF -46oC– 80oC
Class 150 – 600 PN 20 –100
HNBR HNBR (Hydrogenated NBR) has similar media stability to NBR but with significantly better heat and oxidization stability.
-67oF – 337oF -55oC–170oC
Class 150 – 600 PN 20 – 100
Viton Viton (fluorocarbon) is a fluorocarbon elastomer that is compatible with a broad range of chemicals. It performs well in mineral acids, salt solutions, chlorinated hydrocarbons and petroleum oils
-49oF – 320oF -22oC– 204oC
Class 150 – 600 PN 20 – 100
EPDM EPDM has good abrasion and tear resistance with excellent chemical resistance to a variety of acids and alkalines. It is susceptible to attack by oil, strong acids and strong alkalines and should not be used in compressed air lines.
-50oF – 302oF -46oC– 150oC
Class 150 – 600 PN 20 – 100
FVMQ Fluorosilcione is a silicone polymer chain with fluorinated side-chains for improved oil and fuel resistance. The mechanical and physical properties are very similar to those of silicone.
-50oF – 320oF -46oC– 177oC
Class 150 – 600 PN 20 – 100
AFLAS® AFLAS® is highly resistant to a wide range of chemicals -49oF – 428oF -29oC– 220oC
Class 150 – 600 PN 20 – 100
Seat Material Pressure-Temperature Rating (Operating)
17
BUTTERFLY VALVE
VALVE FIGURE NUMBER HOW TO ORDER
Operation Mode
J
G e.g.
Nominal Size
A
1 6
Valve Type
B
B U
Pressure Rating
C
3
End Conn.
D
W
Construct-ion
E
3
Body Material
F
C 4
Trim Material
G
0 1
Seat
H
M
O-ring
I
1
is a NPS 16 Class 300, Butterfly Valve, Wafer Type, Triple Offset, A216 WCB body, 13Cr Trim, Viton O-ring, Gear Operated.
A Nominal Size
00 Special
F1 3/8 (DN 10)
F2 1/2 (DN 15)
0R 1/2 RB
F3 3/4 (DN 20)
R0 3/4 RB
01 1 (DN 25)
R1 1 RB
F4 1 ¼ (DN 32)
1R 1 ¼ RB
F5 1 ½ (DN 40)
2R 1 ½ RB
02 2 (DN 50)
R2 2 RB
F6 2 ½ (DN 65)
3R 2 ½ RB
03 3 (DN 80)
R3 3 RB
04 4 (DN 100)
R4 4 RB
05 5 (DN 125)
R5 5 RB
06 6 (DN 150)
R6 6 RB
07 8 RB
08 8 (DN 200)
09 10 RB
10 10 (DN 250)
11 12 RB
12 12 (DN 300
13 14 RB
14 14 (DN 350)
15 16 RB
16 16 (DN 400)
17 18 RB
18 18 (DN 450)
19 20 RB
20 20 (DN 500)
21 22 RB
22 22 (DN 550)
23 24 RB
24 24 (DN 600)
25 26 RB
26 26 (DN 650)
27 28 RB
28 28 (DN 700)
29 30 RB
30 30 (DN 750)
31 32 RB
32 32 (DN 800)
33 34 RB
34 34 (DN 850)
35 36 RB
36 36 (DN 900)
37 38 RB
38 38 (DN 950)
39 40 RB
40 40 (DN 1000)
41 42 RB
… More as such
B Valve Type
BU Butterfly Valve
C Pressure Rating
0 Special
1 Class 150
3 Class 300
5 Class 1500
6 Class 600
7 Class 2500
9 Class 900
8 Class 800
2 Class 125(PN16)
4 Class 400(PN64)
D End Connection
X Special
R RF Flanged
J RTJ Flanged
F FF Flanged
T Threaded
B Butt-Weld (BW)
S Socket-Weld (SW)
W Wafer
L Lug
E Construction
1 Concentric
2 Double Offset
3 Triple Offset
A351 CF8M S6
A182 F316L S7
A351 CF3M S8
A182 F347 S9
A351 C F8C S0
A182 F51 D1
A995 4A D2
A182 F53 D3
A995 5A D4
A182 F55 D5
D6 A995 6A
X0 Special
C1 A105
C2 A216 WCA
C4 A216 WCB
C6 A216 WCC
M1 A182 F1
M2 A217 WC1
M3 A182 F2
M4 A217 WC4
M5 A182 F12 CL 2
M6 A217 WC5
M7 A182 F11 CL 2
M8 A217 WC6
M9 A182 F22 CL 3
M0 A217 WC9
E1 A182 F5
E2 A217 C5
E4 A217 C6
E5 A182 F9
E6 A217 C12
E7 A182 F91
E8 A217 C12A
L1 A350 LF1
L2 A352 LCA
L3 A350 LF2
L4 A352 LC2
L5 A350 LF3
L6 A352 LC3
L7 A350 LF5
L8 A352 LCB
L9 A350 LF6
LA A350 LF9
LB A352 LC9
LD A352 LCC
S1 A182 F304
S2 A351 CF8
S3 A182 F304L
S4 A351 CF3
S5 A182 F316
F Body Material
I O-Ring
0 None
1 Viton
2 Teflon
3 HNBR
4 NBR
5 Special
6 EPDM
7 FVMQ
8 FFKM
9 AFLAS
B Bare Stem
L Lever
G Gearbox
P Pneumatic
E Electric
C Gear w/ Chain
N Pneumatic-Hydraulic
S Solid Lever
D Lever with locking device
R Solid lever with locking device
J Operation G Trim Material
00 Special
01 13Cr/13Cr
02 304/13Cr
03 316/13Cr
04 304/304
05 316/316
06 316/17-4PH
G Seat
E EPDM
T PTFE
R RPTFE
C 13Cr+Composite
S SS304+Composite
G SS316+Composite
18
BUTTERFLY VALVE
HOW THE FIGURE NUMBER SYSTEM WORKS
Introduction. Figure number system uses a code consisting 14 digits of letters and numbers to represent the
specification of a valve of certain specification. Among 14 digits, they are separated into 10 groups identified by
letters from A to J. Each group represents a parameter of a valve, together they contain almost all the essential
parameters of the valve.
Uses. Using the figure number system to generate a code is easy. Under each group, the code is shown on the left
while on the right is the meaning of the code. Start by selecting a code from group A, through group J. If the
specification of the valve is not listed, select the code for “Special “. The total length of the figure number shall be
exactly 14 digits.
Cautions. It is advised that you have as detailed the specification as possible to generate a figure number, which
means eliminating “Specials”. If you don’t have enough specification or information about the valve you are
ordering, or you’re not sure how to use the system to generate a figure number, contact one of our sales
representatives for help.
Note: FBV reserves the right to make any modifications without notice.
IMPORTANT NOTICE
All dimensions in inches not listed in standards are converted from millimeters. Weights in lbs (pounds) are converted from kilograms.
Data listed in the catalog, including dimensions, weights, specifications and other valve related data are intended to provide general information and guidance only.
FBV Inc. assumes no responsibility for errors or inadequacy relevant to any information provided in this catalog. Any information provided in this catalog is subject to change without notice.
Offshore
Pipeline
Onshore
Refinery
2121 Brittmoore Rd Suite 4000 Houston, TX 77043 USA
T 832-203-5459 F 832-203-5461 E [email protected] www.fbvalve.com
© FBV Inc. All rights reserved.