www.cienmagazine.com FEBRUARY 2009Pu
blic
atio
ns M
ail
Agre
emen
t #
40
06
92
40
Pl
ease
pee
l label
& a
ffix
to
Rea
der
Rep
ly C
ard
photo courtesy of Igus®
plus ... focus on enclosures, new product highlights,application features and upcoming events
ELECTRICAL/ELECTRONICS
ServingCanadianIndustrySince1940
New Hinge Clamps are ideal for clamping in narrow spaces. page 3
Pressurex Zero® Sensor Film measures very low contact pressures. page 3
Stainless steel enclosure for the food and beverage process industry. page 4
PAR30 LED Bulbs are available in 40° light-emitting view angle. page 6
cien feb 09 pg 01.indd 1 22/11/10 10:46 AM
omega.caFree Hardbound Handbook TheCanadian Edition TemperatureHandbook and Encyclopedia
omega.caL' Encyclopédie Édition
Canadienne de température àcouverture rigide gratuite
Go to: www.omega.ca/dilbert for your daily dose of DILBERT!Visitez www.omega.ca/dilbert pour votre dose quotidienne de DILBERT!
Starts atÀ partir de$125100-pk
Starts atÀ partir de$994
Starts atÀ partir de$2490
Starts atÀ partir de$86
Starts atÀ partir de$1835
Starts atÀ partir de$3250
Starts atÀ partir de$181
Starts atÀ partir de$56
Starts atÀ partir de$490
Starts atÀ partir de$4325
Starts atÀ partir de$306
Starts atÀ partir de$1110
Starts atÀ partir de$244
Starts atÀ partir de$156
Starts atÀ partir de$99
Starts atÀ partir de$244
Starts atÀ partir de$615
Starts atÀ partir de$106
Starts atÀ partir de$56
Starts atÀ partir de$88
Starts atÀ partir de$3740
®Shop Online:
omega.ca/209CI3
Magasinez en ligne àShop Online at magasinez en ligne à
© COPYRIGHT 2009 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED© COPYRIGHT 2009 OMEGA ENGINEERING, INC. TOUS DROITS RESERVES
For Sales and Service, Call TOLL FREEpour les ventes et le service - composez
No. N°
Besoin d'un plus grand choix en température?Magasinez en ligne à omega.ca100,000 produits de Mesure et de Contrôle de procédés
Besoin d'un plus grand choix en température?Magasinez en ligne à omega.ca MD
EnglishService
Français
Need More Temperature Options?Shop online atomega.caNeed More Temperature Options?Shop online atomega.ca®
100,000 process control and measurement products (and counting)
FREE!FREE!gratuit
egratuit
e
F2020 SeriesOMEGAFILM® RTD Elements Flat ProfileThin Film Platinum for OEM ApplicationsÉléments RTD OMEGAFILMMD Film minceà profil plat en platine pour applications
de première monte
*CTXL-pH*PATENTED*Breveté
pH & Temperature Input CircularChart Recorder
Enregistreur à Charte Circulaire avecune Entrée de pH et de Température
Covered by U.S. and Internationalpatents and pending applications
Couvert par des brevetsaméricains et étrangers et par desapplications en cours
*Breveté*PATENTED
Hot/Cold BenchtopDry Block CalibratorÉtalon d'établi à bloc secchaud/froid
CL1500 SeriesUniversal Verbalizer Multimeter
OMEGASAYS®
Modèle portatif Haut-parleur et prise
d'écouteur intégrés Plus de 100 unités d'ingénierie intégrées Interface PC RS232 Verbalise les signaux lorsque branché à
d'autres dispositifs de mesure etde contrôle
*UV1000 *PATENTED *Breveté Starts atÀ partir de$299 Portable, Handheld Design
Built-In Speaker andEarphone Jack
Over 100 Built-In EngineeringUnits to Choose From
RS232 PC Interface Verbalizes Signals While
Connected to Other Measurementand Control Devices
Multimètre UniverselVerbaliseur
1⁄16, 1⁄8, and 1⁄4 DINTemperature/ProcessControllers with Fuzzy LogicContrôleurs de température/procédé1/16, 1/8 et 1/4 DIN à logique floue
CN4000 Series
Wrap-Around Tote Tank HeatersRéchauffeur-enveloppe de bac-citerne
TOTE SeriesSuper OMEGACLAD® XLThermocouple Probes, High Temperature!Sondes Super OMEGACLADMD XLà très faible dérive à température élevée
KQXL/KMQXLRH-USB
Humidity temperaturesensor with
USB connectionSenseur d'humidité et de température
avec connexion USB
Computer not included.Ordinateur non inclus.
SA2C-RTD SeriesFlexible Molded RTDSurface SensorsCapteurs RTD surfacielsmoulés flexibles
1⁄8 DIN Meter Scannerand ControllerAnalyseur-contrôleurd'instruments 1/8 DIN
*wi8 Series*PATENTED *Breveté
Portable Paperless Recordersand Data Acquisition Stations
Enregisteurs portatifs sans papier etpostes de collecte de données
RD-MV1000RD-MV2000
SeriesInfrared Pyrometer/Multimeter ThermometerPyromètre à Infrarouge/Multimètre Thermomètre
*PATENTED *Breveté
TM
*HHM290
Infrared Calibrator: Miniature BlackbodyCalibration Source
Étalon à infrarouge : Sourced'étalonnage miniature à corps noir
BB703
The “All-in-One” Surface ThermocoupleLe Themocouple de Surface “Tout-en-Un”
Starts atÀ partir de$1005-pk
SA1XL Series
Wireless Thermocoupleand RTD IndustrialProbe Assemblies
Ensembles sans fil dethermocouple et sonde
industrielle RTD
UWTC-NB9 Series
Thermocouple-to-WirelessConnector/ConverterThe Smart Connector™Connecteur/convertisseur dethermocouple à sans filThe Smart ConnectorMC
*UWTC Series*PATENTED Breveté
*MWTC Series *PATENTED *BrevetéMiniature Wireless ThermocoupleConnectors, The Smart Connector™
Connecteurs miniaturesThe Smart ConnectorMC pourthermocouples sans fil
très bientôt!
très bientôt!
ComingSoon!ComingSoon!
zED-T-P Series
High Power Wireless SensorsCapteurs haute puissance sans fil
zSeriesGroup A
Main Menu
CHART
(5 Seconds/Div)1 Minute
1 Minute1 Day1 Week1 Month1 Year
0
5C/Div
50 1200
300
100%
0%
10%/Div
90hPa/Div
LAB 100 RH LAB100 PresC hPa
Tue Jun 5 10:19:10 PDT 2007Tue Jun 5 10:18:10 PDT 2007
http://192.168.1.200
LAB 100 Temp 30 1010
P0 Primary
P1 Primary
P2 LAB 100
P3 Primary
P4 Primary
P5 Primary
P6 Primary
P7 Primary
S0 Secondary
S1 Secondary
S2 LAB 100
S3 Secondary
S4 Secondary
S5 Secondary
S6 Secondary
S7 Secondary
Save Current Graph
OS530E-DM E Series*PATENTED *Breveté
TM
Starts atÀ partir de$430OMEGASCOPE® Handheld
Infrared Thermometerwith DistanceMeasuring Options
Thermomètre àinfrarouge de pocheOMEGASCOPEMD avecoptions de mesureà distance
Industrial Non-Contact InfraredThermometer/Transmitter
Thermomètre/transmetteur industrielà infrarouge sans contact
OS550A SeriesDual DIN RailTemperature TransmitterTransmetteur detempératuresur rail DIN double
TXDIN70HSRTD SeriesFlexible Sealed PFA RTD Sensors forUse in Corrosive Environments and
Tight PlacesSenseurs RTD Flexibles et ScellésRecouverts de PFA pour Utilisationdans un Environnement Corrosif et
Endroits Restreints
TipEnlargement
Platinum RTD Sensors withIndustrial Protection HeadsCapteurs RTD en platine avectêtes de protection industrielles
PRTF-12 Series
Surface Probe CalibratorCalibrateur de sondes de surface
CL1600
Handbook Cover: © 2009 SEPS: Licensed by Curtis Publishing, Indianapolis, IN. All Rights reserved.Dilbert © United Feature Syndicate, Inc.
CIEN_0209.qxd:CIEN 1/19/09 12:33 PM Page 1
101 101
CIRCLE NO. 101 ON READER REPLY CARD
cien feb 09 pg 02.indd 2 1/30/09 9:09:10 AM
www.cienmagazine.com february 2009
february 2009 Vol. 70 No. 2
Editor and Associate PublisherOlga Markovichtel: (416) 510-5113
Publisher Michael Kingtel: (416) 510-5107
Sales Manager Mark Larchertel: (416) 510-5125
Circulation Diane Rakofftel: (416) 510-5216
Art Director Sheila WilsonProduction Manager Kim CollinsReader Service Liz CallaghanAdministrative Assistant Diane MoskalVice-President, Canadian Publishing Alex PapanouPresident, Business Information Group Bruce Creighton
Advertising Representatives — Canada
Toronto, Ont.: Michael King, Mark Larcher12 Concorde Place, Suite 800, Toronto, ON. M3C 4J2. Tel. (416) 442-5600; Fax (416) 510-5140.
Head Office12 Concorde Place, Suite 800, Toronto, ON. M3C 4J2. Tel. (416) 442-5600; Fax (416) 510-5140.
Subscription rates: Canada: $71.95 plus applic-able taxes for one year, 11 issues; $115.95 for two years, 22 issues. USA: $75.95 US Funds per year, 11 issues. All other foreign: $98.95 US Funds per year, 11 issues. Single copy: $10.00.
From time to time we make our subscription list available to select companies and organizations whose product or service may interest you. If you do not wish your contact information to be made available, please contact us via one of the follow-ing methods ...
Phone: 1-800-268-7742; Fax: 416-510-5130; Email: [email protected]
Mail to: Privacy Officer, Business Information Group, 12 Concorde Place, Suite 800, Toronto, ON. M3C 4J2.
Editorial Purpose: Canadian Industrial Equipment News provides the answers to increased produc-tion, efficiency and profit by keeping our readers informed of the latest technological advances in products, components and maintenance materials, offering the competitive edge in today’s market.
Canadian Industrial Equipment News (ISSN 0319-5902) is published 11 times a year by Business Information Group, L.P., a leading Canadian in-formation company with interests in business-to-business information services.
“Printed in Canada. All rights reserved. The con-tents of this publication may not be reproduced either in part or in full without the consent of the copyright owner.”
The contents of this magazine are protected by copyright and may be used only for your personal non-commercial purposes. All other rights are re-served and commercial use is prohibited. To make use of any of this material you must first obtain the permission of the owner of the copyright. For further information please contact Olga Mar-kovich at 416-510-5113.
Publications Mail Agreement No. 40069240. Return undeliverable Canadian Addresses to Circulation Dept. — Canadian Industrial Equip-ment News, 12 Concorde Place, Suite 800, To-ronto, ON M3C 4J2.
CIEN, USPS 761-830 is published monthly by Business Information Group. US office of publi-cation: 2424 Niagara Falls Blvd, Niagara Falls, NY 14304-0357. Periodicals Postage Paid at Niagara Falls, NY. US postmaster: Send address changes to Canadian Industrial Equipment News, PO Box 1118, Niagara Falls, NY 14304.
Printed in Canada.
USPS 761-830 ISSN 0319-5902
Member, Canadian Business Press
On the cover ...HINGE CLAMPSThese new Hinge Clamps are ideal for clamping in narrow recesses. This is due to a special linkage that moves the clamping arm forward as it pivots into clamping position, allowing the clamp to exert nearly perfectly vertical clamping force. The clamping arm retracts fully for clear loading from above. Double acting, with a maximum operating pressure of 3600 psi max, the clamp is de-signed for 500,000 cycles, and contains a swivel contact bolt and reinforced hinge mechanism for added flexibility. Designed for manifold mounting, the clamp is available in more than 100 differ-ent variations with clamping forces from 500 to 3200 lbs., with optional position sensing. Carr Lane Roemheld Mfg. Co.
CIRCLE NO. 11 ON READER REPLY CARD
SENSOR FILMPressurex Zero® pressure-indicating sensor film measures and maps very low contact pressures. It is an easy-to-use flexible film that is placed between contacting or mating surfaces to instantly and accurately
measure and map pressure magnitude and distribution. Variations in contact surface pressure is immediately visible by the impression made on the film. The spatial resolution of the film is fine enough to expose minute surface defects and other imperfections. The range for Pressurex Zero® is 7.2 – 28 psi. Pressurex® comes in the form of a thin clear plastic sheet (4 or 8 mil), physically similar in appearance to paper. It is available in eight different pressure ranges. When placed between contacting surfaces, it instantaneously and permanently changes colour direct-ly proportional to the actual pressure applied. The precise pressure magnitude is easily deter-
mined by comparing colour variation results to a colour correlation chart.Sensor Products Inc.
CIRCLE NO. 12 ON READER REPLY CARDBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS
S ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CO
RS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDE
OVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS N
PPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STA
FS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES
OTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOW
BOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HING
LDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUT
PES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TU
ES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS
OSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLAN
OD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE
G MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS
EEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE
RICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLIN
VERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMET
ES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBO
OKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SU
RTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLT
XES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRIC
ECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS
AC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POST
REWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WAL
UGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COM
NDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING
RE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURIN
ODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SP
HERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPME
PLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFEN
SPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HE
DUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIP
ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES
OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS C
AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET
NGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS L
MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS
S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS AD
ROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS COR
UPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMEN
OMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLE
TS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS
ON CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTI
LLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELB
ECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLD
OKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPE
UGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLE
WIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS
RES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES
OCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASK
NUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEAL
EEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE
RICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLIN
VERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMET
ES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBO
OKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SU
RTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLT
XES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRIC
ECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS
AC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POST
REWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WAL
UGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COM
NDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING
RE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURIN
ODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SP
HERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPME
PLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFEN
SPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HE
DUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS LATCHES MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIP
ARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS RIVETS SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES
OLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS ADAPTER AEROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS C
AMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS CORDS COUPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET
NGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMENT GROMMETS HANDLES HARDWARE HEAVY INDUSTRY HINGES HOLDERS HOOKS HOSE HVAC INSULATORS KNOBS L
MARINE MASKING MANUFACTURING PRODUCTS NETTING NIPPLES NUTS PEGBOARD HOOKS OFFICE EQUIPMENT PHARMACEUTICAL PIPES PLUGS POSTS AND SCREWS ROBOTICS RODS
S SCREWS SEALS SLEEVING SPACERS SPHERES STANDOFFS SUCTION CUPS SUPPORTS TECHNOLOGY TEES TIES TOOLS TURNTABLES TWIST-TIES WALL PLUGS WASHERS WRAPS AD
ROSPACE AGRICULTURAL EQUIPMENT APPLIANCES AUTOMOTIVE BALLS BOLTS BOXES BUMPERS CANE TIPS CAPS CLAMPS CLIPS CLOSURES COMPUTERS CONDUIT CONNECTORS COR
UPLINGS COVERS CUBES DEFENCE DISPLAY DOWELS ELBOWS ELECTRICAL ELECTRONICS FASTENERS FEET FITTINGS FLANGES FOOD PROCESSING FURNITURE GLIDES GOVERNMEN
Countless possibilities, millions of solutionsTM
Cords Canada Ltd.Toronto/GTA: 416-242-6811 North America toll free: 1-800-363-5080
www.cordscanada.com
8 of the millions of solutions found in Montreal
Salut à tous nos clients au Québec! Where will you find Cords next...?
bumperson officedrawers
liquid tight fittings in elevator
equipment
acryliccubes on sculpture in lobby
TPE feetunder
microwave
nylon washers in air
conditioners
nylon round spacers
in lightedsign
cable ties seal
money bags in bank
Gripmasterstrain reliefs for electrical
cabling
À Montréal, au Canada, wherever –there’s a little piece of Cords.
KAL817_CORDS_CIENad_Feb09_City6_FIN 1/23/09 1:11 PM Page 1
CIRCLE NO. 102 ON READER REPLY CARD
cien feb 09 pg 03.indd 3 1/30/09 10:29:24 AM
february 2009 www.cienmagazine.com new products
WINTER TRACTION AIDSThe Due North Winter Traction Aids are lightweight and fit over the footwear that people already own and feel comfortable in. They use longer lasting replaceable spikes made of tungsten carbide for su-perior traction on ice and snow. They are non-sparking and do not “round off” as they wear. Dentec Safety Specialists
CIRCLE NO. 23 ON READER REPLY CARD
ADJUSTABLE AIR AMPLIFIEREXAIR’s new 3” Adjustable Air Amplifier offers a simple way to move high volumes of air to cool, vent, exhaust and dry. The airflow can be easily adjusted from a “blast” to a “breeze” to match the applica-tion requirements. There are no impellers or moving parts to wear out. Applications include cooling hot parts, exhausting smoke and fumes, distributing heat in ovens or molds, and drying components. Construction is aluminum or stainless steel.EXAIR Corporation
CIRCLE NO. 24 ON READER REPLY CARD
PRESSURE COMPENSATIONIt has become important to provide a pro-tected enclosure environment for valu-able and crucial electrical and electronic components. In a tightly closed enclos-ure, pressure differentials can occur dur-ing extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity being ab-sorbed into the control panel increases dramatically. The DA084 series has a high degree of protection and has a NEMA 3 (IP45) rating. The easily instal-led, specially designed pressure compen-sation plug DA084 permits a controlled change in pressure. The DA084’s material is plastic according to UL94 V-0 and this series comes with an operator’s manual. The product is suitable for automotive and petroleum industries.OMEGA
CIRCLE NO. 21 ON READER REPLY CARD
ASSEMBLY COMPONENTSSimilar to LEGO blocks, Flexpipe assem-bly components enable companies to eas-ily create custom workstations, carts, racks and any other devices that employee inventiveness can produce. The Flexpipe modular system is made up of resin-coat-ed steel tubes, steel connectors, conveyor rails and wheels and various accessories that can easily be assembled with a simple hex key. The system is simple, flexible, multifunctional, safe and reusable. Martins Industries
CIRCLE NO. 22 ON READER REPLY CARD
On the cover ...PANEL ENCLOSURERittal offers a stainless steel enclosure solution comprising Premium Panel enclosure, together with TFT and IP rated keyboard that meet the strict hygiene requirements of the food and beverage process industry. Available in 304 grade stainless steel, with keyboard select, the Premium enclosure, with protection category IP69K, is available in four sizes, capable of integrat-ing 15” to 17” monitors and control panels. The enclosure can also be mounted top or bottom onto support arm systems such as the stainless steel CP-S system. Monitors can be integrated into the enclosure, either LCD or TFT, with resistive touch screen and brightness of 250cd/m2. Input devices such as the Rittal IP69K rated stainless steel keyboard can also be mounted into the keyboard section to provide a maintenance free and vandal proof keyboard, based on piezo technology with 105 keys and USB connection.Rittal Systems Limited
CIRCLE NO. 13 ON READER REPLY CARD
CIRCLE NO. 103 ON READER REPLY CARD
CIRCLE NO. 104 ON READER REPLY CARD
DC GEARMOTORSThe new series of fractional horsepower DC gearmotors features right angle worm gearing. Designed to also function as Von Weise Drop-In Replacements, the VWDIR23 gearmotors are available in 6 standard 90 volt DC input models. With gear ratios from 37:1 to 525:1, corresponding fixed output speeds range from 90 to 3rpm, and output torques from 34 to 250 in-lbs (3.8 to 28.3 N-m). These drop-in replacements for VW23 and VW33 gearmotors feature 1/10 or 1/20 hp (75 or 150 watt) permanent magnet DC motors with replaceable brushes, grease lubrication for long life and all-position mounting, with left, right or dual output shafts with a 100 lb (45.4kg) overhung load rating.Bison Gear & Engineering Corp.
CIRCLE NO. 76 ON READER REPLY CARD
cien feb 09 pg 04.indd 4 1/30/09 9:11:03 AM
TOOLING COMPONENTS, CLAMPSCarr Lane’s 680-page catalog contains alignmentpins, plungers, handles and knobs, locators, sup-ports, tooling plates and blocks, jig and fixturebases, and more. Full sections on chuck jaws, drilljig bushings, toggle clamps, modular fixturing, andpower workholding. Send for a copy, or view itonline.
Carr Lane Mfg. Co., www.carrlane.com.
Carr Lane has introduced a variety of new toggleclamps with safety locks.
• Latch-action toggle clamps are available infive sizes, from 360 to7500 lbs holding capacity,with a threaded U bolt for adjustability and amatching latch plate.
• Vertical-handle toggle clamps are available inthree sizes, from 150 to 500 lbs holding capacity.These compact hold-down clamps have a uniquefinger-grip T handle and an open arm that providesadjustable spindle location.
• Horizontal-handle toggle clamps are avail-able in two sizes, from 500 to 750 lbs holdingcapacity. These low-profile hold-down clamps alsohave an open arm that provides adjustable spindlelocation.
All three types are available with an optional safety lock that automaticallyengages when the clamp is closed, then remains locked until manually disen-gaged by pushing a lever before opening. This prevents the clamp from being
accidentally opened by bumping the handle.
Carr Lane offers a toggle clamp for just aboutevery application. These versatile clamps offerfast, easy workholding. Carr Lane’s completetoggle clamp line includes horizontal and verticalhandle hold-down clamps, push/pull models,latch-action clamps, toggle pliers and air-poweredclamps. All Carr Lane toggle clamps have a com-fortable handle grip, and are made of durablehigh-grade steel (also available in stainless steel).All are available in a range of sizes and holdingcapacities.
Mini sizes and clamps for heavy-duty applica-tions are other options, as well as straight or
flanged bases and open or solid arms.
Send for a catalog at Carr Lane Mfg. Co.,4200 Carr Lane Ct., St. Louis, MO 63119 or visit the online catalog atcarrlane.com.
Three New Toggle Clamps Offer Safety Locks
DRILL JIG BUSHINGSCarr Lane offers a huge selection of drill jig bush-ings, representing more than 60 illustrated pagesin the company’s catalog, with most available inmetric as well as U.S. sizes. Precision honed andground, all Carr Lane bushings exceed ANSIstandards. Unground bushings are available foroversize holes.
Carr Lane Mfg. Co., www.carrlane.com.
HARD & SOFT CHUCK JAWSHard and soft chuck jaws are available from CarrLane, with hundreds of jaws in popular sizes fordozens of chuck brands, in steel, cast iron oraluminum versions. Hard jaws are available intwo-step reversible and single-step reversiblevarieties. Soft jaws are available pointed, squarenosed and as pie jaws®.
Carr Lane Mfg. Co., www.carrlane.com.
Save time, and turn to CarrLane.com for the onlinecatalog with the widest variety of products you need.Carr Lane provides more than 100,000 products forOEM design, tooling and workholding.In addition to English, now our online catalog isavailable in French, Spanish, German and Italian.So visit Product Central, and see the online catalog atCarrLane.com.
Carr Lane offers standard components to help youincrease quality and productivity.
ISO 9001-2000CERTIFIED
MORE THAN 100,000 COMPONENTS,CAD DRAWINGS AND MORE!CARRLANE.COM IS PRODUCT CENTRAL.
Quick Release Pins.Searching for quick alignment? CarrLane’s variety of quality pins speedsup manufacturing and assembly.Several models, including the balllock mounting system, featurelocking action for both locating andclamping. Carr Lane Mfg. Co., www.carrlane.com
Toggle Clamps. Need to get a grip?Toggle clamps can make it happen.Choose from hold-down, push/pulland latch-action types. New optionsoffer built-in safety locks.Carr Lane Mfg. Co., www.carrlane.com
Adjustable Locking Hubs. In sturdystainless steel or lightweight plastic,the hub is a rotary bearing thatprovides positive locking at any 10° or15° increment. Use when a designrequires adjusting, reclining or folding.Carr Lane Mfg. Co., www.carrlane.com
Advertisement
New latch-action, vertical-handle and hori-zontal-handle toggle clamps, all withoptional safety locks, from Carr Lane.
CIRCLE NO. 109 ON READER REPLY CARD
CIRCLE NO. 105 ON READER REPLY CARD
CIRCLE NO. 106 ON READER REPLY CARD
CIRCLE NO. 107 ON READER REPLY CARD
CIRCLE NO. 108 ON READER REPLY CARD
cien feb 09 pg 05.indd 5 1/30/09 9:11:37 AM
february 2009 www.cienmagazine.com
MASS FLOW METERThe Air-Trak™ Model 628S is specifically designed to measure engine air intake mass flow rate. The meter uses Fast-Flo Sensor Technology® for an extremely fast, 200 millisecond response-time making it ideal for the toughest transient test cycles. The versatile microprocessor-based instrument integrates the functions of flow-range ad-justment, meter validation and diagnostics encased in a probe-mounted NEMA 4X (IP65) housing. Mass flow rate and total-ized flow, as well as other configuration variables, are displayed on the meter’s 2 x 12 backlit LCD panel.Sierra Instruments
CIRCLE NO. 33 ON READER REPLY CARD
LEAK DETECTORThe ThermaCAMAE GasFindIR CO™ detects carbon monoxide that is created during a variety of industrial processes. GasFindIR can scan wide areas from a distance to quickly identify the emission at its source allowing for improved work-er safety and greater efficiencies. These three user-selectable integration modes, Normal Scene, Cold Scene, and Hot Scene can be selected at 60 Hz. Gas-FindIR CO has an advanced cooled InSb detector and optical systems that are tuned to very narrow spectral infrared images for detection of very small leaks that can easily go unidentified with other detection devices.FLIR Systems, Inc.
CIRCLE NO. 34 ON READER REPLY CARD
new products
HEX HEAD SCREW COVERSThese Hex Head Screw Covers are manu-factured in black high density polyethy-lene 6/6. They provide a snug, protective, concealed finish to metal hexagon nut and screw heads. The hex head screw covers are available in two separate styles: a round ID for M6 pan or hex head ma-chine screws, or a hex ID for M8 hex nuts and screws. Micro Plastics
CIRCLE NO. 28 ON READER REPLY CARD
ROTARY ENCODERBalluff’s new BML S2E rotary encoder provides a new level of positional infor-mation for applications such as conveyors, speed control and angle measurement. Its basic design consists of a magnetically-encoded ring and a non-contact sensor head. This assembly installs easily and provides a quadrature outlet at up to 46,000 pulses per revolution. An available mounting hub allows its magnet ring to be adapted to a wide range of applica-tions. The 2SE provides accurate velocity and position tracking of virtually any ro-tary movement to monitor continuous and/or oscillating rotary shaft motion. It provides continuous feedback allowing PLC-directed set points and electronic cams to be established to make the oper-ation of the host machine more flexible.Balluff
CIRCLE NO. 29 ON READER REPLY CARD
MULTI CONNECTION SYSTEMWAGO has extended the pole configura-tions for the insulated comb-style jumper bars used with the 231 Series Multi Con-nection System (MCS) MIDI (pin spacing 5mm/5.08mm). In addition to a 2-pole configuration, 3-, 5-, 7- and 10-pole ver-sions have joined this MCS MIDI lineup to provide additional flexibility. The jumpers have been specifically designed for CAGE CLAMP® compatibility. With the MCS jumpers, just one connection system is needed. The jumpers also fea-ture an insulated, touch-safe design for safety, on-unit molded markings for easy identification and quick installation, re-movable jumper pins for custom config-urations and suitability for both a 5mm and 5.08 mm pitch. The RoHS-compli-ant MCS MIDI jumpers are also Spring Pressure-compatible. Additionally, all versions within the wide range of MCS MIDI jumpers are available from stock.WAGO Corporation
CIRCLE NO. 78 ON READER REPLY CARD
PORTABLE PRINTERDesigned for harsh outdoor environ-ments, the Andes 3 three-inch printer is IP54 certified and is able to withstand ad-verse weather conditions and drops to concrete without diminished perform-ance. Its Form Fiesta – a Windows based page printing utility – provides an array of design functions to prepare visually pleasing and informative forms that in-clude test, barcodes and tables. The Andes 3 unit features a highly integrated 32 bit microcontroller and incorporates 4 MB flash and 1 MB SRAM memory that is under user control. The lightweight printer boasts an in-field programmable CPU containing firmware, resident fonts, rotated fonts, downloadable fonts, graph-ics, multiple logos and bar codes.Extech Data Systems
CIRCLE NO. 30 ON READER REPLY CARD
LINEAR ACTUATORThe 35000 series (Size 14) double stack captive hybrid linear actuator is designed with an internal anti-rotation mechanism and is specially well suited for applica-tions in which external anti-rotation methods would be difficult or impossible to employ. The size 14 double stack hy-brid linear actuator features engineering thermoplastics in the rotor drive nut and a stainless steel Acme lead screw. Typical applications include medical equipment, semiconductor handling, valve control, X-Y tables, hand-held instruments, tele-communications, or wherever precise linear or rapid motion is required.Haydon Switch & Instrument, Inc.
CIRCLE NO, 31 ON READER REPLY CARD
HALF-HEX THREADED INSERTSNew Atlas® SpinTite® stainless steel half-hex shank threaded inserts provide corrosion resistance and ideal hardware fastening solutions for “blind” attachment applications where only one side of a panel is accessible for assembly. Their hex body design for installation in hex holes promotes high resistance to rotation and a low-profile head minimizes protrusions. These stainless threaded inserts provide practical alternatives to tapped holes, weld nuts, rivets, and self-drilling or tap-ping screws and can enable close-to-edge mounting. PennEngineering®
CIRCLE NO. 32 ON READER REPLY CARD
ELECTRICAL INSULATING FLUIDSPetro-Canada announces that their LU-MINOL TR and TRi electrical insulating fluids meet the new Type III and Type IV special requirements introduced by the Ca-nadian Standards Association (CSA). The new requirements were created to ensure that electrical insulating fluids perform under the increasing demand put on today’s HVDC and shell-type power transformers, free-breathing transformers operating under overload conditions and reactors. Petro-Canada
CIRCLE NO. 25 ON READER REPLY CARD
VARIABLE FREQUENCY DRIVESThe Variflex2 RVEF Series variable fre-quency drives are ideal for general pur-pose motor applications from 0.25 to 3.0 HP motors and offer features and options that are usually only available on larger drives. The Variflex2 Series is a reliable range of drives that are easy to use and setup either via their front touch pad or simple and intuitive PC software tool. The Series is available in two frame sizes, covering main supply voltages (110/230 VAC single phase or 230/480VAC three phase). Internal thermal management has been optimized to allow side by side in-stallation without any performance derat-ing in temperatures up to +50°C. Carlo Gavazzi (Canada) Inc.
CIRCLE NO. 26 ON READER REPLY CARD
VOLT-OHM METERThe Simpson new 260-9S Volt-ohm me-ter is identified as an industrial safety VOM and is rated for Category III – 600 V applications. techniCAL Systems 2002 Inc.
CIRCLE NO. 27 ON READER REPLY CARD
EPOXY POTTING SYSTEMSThe CONAP® Epoxy Potting Systems extend the life cycle of devices in electric-al and electronic designs, such as coils, controls, sensors and transformers. All three products provide an ambient cure and have excellent storage stability. Each is formulated with a non-abrasive filler to reduce wear on machine metering/dis-pensing equipment. CONAPOXY FR-1810 is an 80 Shore D flexible two-com-ponent, low exotherm, flame retardant, long-life epoxy potting and casting sys-tem with excellent handling properties. It is well suited for protecting electronic modules, components, and electrical de-vices from thermal shock. A fast gellation epoxy, CONAPOXY FR-1820 is for de-signs requiring fast line speed potting of electronic modules, components and electrical devices. The CONAPOXY FR-1830’s mixed viscosity of 2,100 cps at 25°C has excellent release of entrapped air characteristics.Cytec Industries Inc.
CIRCLE NO. 77 ON READER REPLY CARD
On the cover ...
LED BULBSThe PAR30 LED spotlight bulb is made up of five three-Watt high-power LEDs. They are direct incandescent PAR30 replace-ments, combining advanced Light Emitting Diode (LED) technologies, standard 25mm Edison screw-in bases, and light optimizing designs producing 480 to 544 lumens of vivid light depending on the bulb model. PAR30 LED bulbs are available in a 40° light-emitting viewing angle, running on 80V to 260V AC current. The high-power white LEDs feature a low power draw, high shock/vibration resist-ance and last up to 50,000 con-tinuous hours. PAR30 LED lamps are available in colour temper-atures of 300Kelvin Warm White and 5000Kelvin Pure White.LEDtronics, Inc.
CIRCLE NO. 14 ON READER REPLY CARD
cien feb 09 pg 06.indd 6 1/30/09 9:12:22 AM
CIRCLE NO. 110 ON READER REPLY CARD
cien feb 09 pg 07.indd 7 1/30/09 9:13:03 AM
february 2009 www.cienmagazine.com
LISTA COMPLETES THE CIRCUITwith durable, attractive ESD workstation
Automated Circuit Design provides OEMs in the electronics industry with a complete spectrum of post-engineering printed circuit board (PCB) as-
sembly, design and testing solutions. A large PCB Design Service Bureau, ACD is an all-in-one-source for PCB de-sign, PCB fabrication, PCB prototype and production as-sembly, box-build assembly, PCA testing, functional test-ing and component procurement.
Production Manager Bob Smith is responsible for keeping things flowing smoothly on the production floor and meeting day-to-day scheduling demands, which can often include some potentially stress-inducing quick turnarounds and deadlines. However, there was one fairly substantial bump in the road.
One night, fire broke out from an electrical box within the ACD complex. No one was injured, but much of the company’s operations equipment was destroyed by smoke and water damage. While the company was temporarily relocated to a nearby location, the original 15,000 square foot facility was renovated and new equipment was pur-chased and installed.
ACD replaced the company’s older workstations with about 50 Arlink® 8000 Modular Workstations. Produced by Lista International Corp., a leading manufacturer of modular workstations and storage solutions, the Arlink 8000 had the quality, flexibility and durability that Smith and the ACD applications needed.
Smith was impressed with the overall quality of the Lista products and the Arlink workstation, placing par-ticular emphasis on the workstation’s structural support, sturdiness and heavy gauge metal. “With the Arlink 8000 workstations,” Smith said, “we knew we were getting durable workstations that could meet all of our needs today and well into the future. There have been no lim-itations with the Arlink 8000.”
Ideal for a wide variety of applications, including assembly, computing environments, service, repair, research and technical work, Lista’s Arlink 8000 work-stations can be configured in a variety of heights and
ACD to utilize layouts that exactly address each of the facility’s unique applications.
Smith also views the workstation’s aesthetic appeal as a big plus for ACD. He said, “We all take great pride in the appearance of our production floor, as we often have customers touring the facility. A uniform look of consist-ent quality is essential for echoing ACD’s well-earned image of quality and attention to detail. Customers often compliment us on the aesthetics of our production areas, and the workstations contribute a lot to that.”
Today, equipment procurement at ACD is driven not by urgent needs (as it was with the fire) but by increased demand and sales growth. Given Smith’s complete satisfaction with the Lista workstations, the Arlink 8000 remains the go-to option to fulfill his production needs.
”With our recent expansion of adding an additional 11,000 square feet to our facility, we have substantially added to the number of workstations in our facility. The Lista sales team has always been very responsive to our needs and their products deliver everything we need.”Lista International Corporation
CIRCLE NO. 35 ON READER REPLY CARD
focus on ... electrical/electronics
lengths to best suit specific needs. At ACD, the Arlink workstations deliver the flexibility to perform in three unique departments: the kitting stockroom where kitting materials arrive and are subsequently distributed; the production floor, and the test department.
A principle caveat for ACD’s workstation procurement was that the workstations needed to offer both excep-tional functionality and ESD protection.
”All the workstations are electro-static dissipative,” said Smith. “So they are an ideal solution for every de-partment. In the kitting area, technicians can safely work with electrostatic components. And in the assembly and production departments, every technician can perform the most precise processes effectively. The Arlink 8000 provides the lighting needed to perform every task with attention to every detail. Additionally, its substantial shelving space offers the space needed to set up stations for testing completed products.”
The Arlink 8000 provides ACD with a modular solu-tion that can meet a wide variety of needs. Available in five industry-standard widths and five different heights up to 84”, the Arlink 8000 also features a unique “starter and adder” system, with the option of back-to-back con-figurations and mobility. This level of flexibility enables
ELECTRICAL CONNECTORSBy redesigning its time-saving Liquidtight ST Series of cable and conduit connectors, Appleton is targeting OEM and harsh in-dustrial applications that require electrical connections be protected from water, dust, oil, grease, fumes and other hostile con-taminants. Now available pre-assembled with an integrated KO sealing ring, the connectors are suitable for machine shop equipment, conveyors, material handling equipment, packaging, pumps and motors. Bar stock steel or malleable iron construc-tion offers long-lasting performance.EGS Electrical Group
CIRCLE NO. 79 ON READER REPLY CARD
LED RECHARGEABLE LIGHTSBoasting up to 18,000 candela (peak beam intensity) and 140 lumens measured sys-tem output, the Stinger® LED and Sting-er® DS™ LED rechargeable flashlights provide extraordinary brightness and dur-ability with new power C4™ LED tech-nology. They are suitable for virtually any job, from replacing a small machine part to more general uses such as lighting up areas of a shop floor. Both LEDs are con-structed of machined 6000-series aircraft aluminum and feature a non-slip rubber-ized comfort grip with anti-roll rubber ring. Both provide high brightness for up to 1.75 hours of continuous runtime, up to 3.5 hours continuous hours at medium brightness and up to 6.75 continuous hours at low brightness. The strobe fea-ture operates for up to 5.50 continuous hours.Streamlight, Inc.
CIRCLE NO. 80 ON READER REPLY CARD
DIGITAL OUTPUT BOARDSThe Guardian™ DNA/DNR-DIO-432 and –433 industrial digital output boards are designed for use with UEI’s Ethernet Cube family — PowerDNA, UEIPAC, UEILogger and Modbus “Cubes”. The DNR models are designed for UEI’s new 12-slot rack-mounted RACKtangle I/O chassis. Each board provides 32 channels of digital output — up to 600 mA per-channel continuous current with an output voltage drop of less than 550 mV. The –432 version outputs are configured as current sources; the –433 as current sinks. The output ports are configured as single 32-bit words, the maximum output throughput rate is 1 kS/s, and the boards have an oper-ating range of 3.3 to 36 VDC.United Electronics Industries
CIRCLE NO. 90 ON READER REPLY CARD
ELECTRIC ACTUATORSNew Valvcon ADC Low Temperature Ac-tuators offer the torque and reliability of the Valvcon ADC platform combined with ultra low current draw electronics and bat-tery back-up capability for power loss situ-ations. They are suitable for remote solar powered installations and are also well suited for on/off duty and proportional ap-plications where extreme cold temper-atures exist. These rugged, compact, quar-ter-turn electric actuators have been designed for use in the coldest and most remote environments. Their operating temperature range extends down to –40°F without the need for an internal heater.Metso Automation
CIRCLE NO. 91 ON READER REPLY CARD
OSCILLATORSThe XpressO™ LVPECL and LVDS oscil-lators with 2.5-volt operation enable oper-ation at the same voltage as the silicon chips to which they are providing timing, result-ing in less current and heat generation. The oscillators employ noise reducing DSM technology and low noise architecture, of-fering low levels of jitter and phase noise. This series is ideal for a variety of applica-tions including SONET, Ethernet, storage area network, broadband access, micro-processors/DSP/FPGA, industrial con-trollers, test and measurement equipment, fiber channel and portable applications re-quiring low power usage. The oscillators feature application specific integrated cir-cuits (ASICs) for accurate performance and increased flexibility.Fox Electronics
CIRCLE NO. 92 ON READER REPLY CARD
MULTI-RANGE DC SUPPLYThe Model 9110 100W 60V/5A Multi-Range DC Power Supply automatically re-calculates the voltage/current limits for each setting and provides 100W output power in any Volt/Amp combination with the rated voltage (60V) and current (5A) limits. By providing greatly expanded choices of max-imum power Volt/Amp combinations, users can cut down on the number of power sup-plies required. Features include: digitally controlled, mixed mode linear/switching DC power supply, bright easy-to-read dis-play and low ripple and noise.B&K Precision Corporation
CIRCLE NO. 93 ON READER REPLY CARD
MEASUREMENT MODULEWAGO’s 750-493 3-Phase Power Mea-surement Module integrates comprehen-sive monitoring of a power supply net-work with the connectivity of an I/O system. At just 12mm wide, the high-density, 6-channel 750-493 represents a space-effective solution to power system supply management. Since the module is a component of a remote I/O or distrib-uted control system, it is compatible with 16 different fieldbus networks (including Ethernet, Profibus, Modbus, and Device-Net) and the 300+ digital, analog, and special function modules found in the WAGO-I/O-SYSTEM, making it flex-ible and efficient to analyze and distribute power supply data. When one or more 750-493 modules are connected to a WAGO controller, the solution can be programmed with WAGO-I/O-PRO CAA for data logging, time stamping and historical analysis. Because the DIN-rail mountable 750-493 was designed as an I/O system component, much of the com-plexity associated with traditional mod-ules has been minimized. There is no need for power feeds, additional network-ing and special mounting.WAGO Corporation
CIRCLE NO. 94 ON READER REPLY CARD
cien feb 09 pg 08.indd 8 1/30/09 9:13:41 AM
CIRCLE NO. 111 ON READER REPLY CARD
focus on ... electrical/electronics www.cienmagazine.com february 2009
CONTINUOUS FLEX CABLESigus® now offers a full line of Chainflex® continuous-flex cables for bus systems, including a cable specifically designed for USB applications. This cable is ideal for industrial environments requiring a USB 2.0 connection and provides fast, reliable data transmissions up to 16.4 feet. Chain-flex USB cables feature a pressure-extrud-ed, flame-retardant. TPE-blend outer jacket for extended service life to millions of cycles. They boost a minimum bend radius of 12.5 times the outer cable diam-eter and operate within a permissible tem-perature range of –31°F to +158°F. With an overall shield for increased EMI pro-tection, Chainflex USB cables are un-affected by high-noise, industrial environ-ments where crosstalk can be a problem. igus® Inc.
CIRCLE NO. 36 ON READER REPLY CARD
WORKGROUP ANALYZERThe OptiView Series III Workgroup Analyzer is an “always-on” solution that identifies every device, application, and connection on the network, making it easy for users to quickly see performance problems, identify the cause and solve the problem. The Workgroup Analyzer ad-dresses the issue of maintaining network performance even as new technologies and new services require infrastructure changes at central and remote locations. By providing flexibility in network analy-sis and troubleshooting, the Workgroup Analyzer helps network managers main-tain performance in changing environ-ments. Located centrally, multiple users can access the Workgroup Analyzer at the same time.Fluke Networks
CIRCLE NO. 37 ON READER REPLY CARD
LED ENGINEERING KITThe new LED Engineering Kit is a power-ful tool for testing LEDs with various ac-cessories and applications while gaining practical knowledge of LED lighting. The new kit includes an OSRAM OSTAR high-power LED and components from various LED Light for You (LLFY) part-ners to include several lenses and reflect-ors, a power supply, a thermal interface material and a selection of heat sinks.OSRAM Opto Semiconductors
CIRCLE NO. 38 ON READER REPLY CARD
CURRENT & VOLTAGE CALIBRATORThe pocket-size Model CSG Current and Voltage Calibrator is an ideal tool for troubleshooting transmitters, transducers, motors and actuators. It generates a 0 to 10 VDC signal in increments of 1 volt or a 4 to 20 mA signal in increments of 1 mA. The ramp interval timing function allows user to define maximum and minimum values. An easy to read LCD screen with a blue backlight allows for use in dimly lit areas. The CSG also features an auto shut-off timer from 1 to 20 minutes. The ambient operating temperature for the Model CSG is 0 to 50°C making it useful in various applications. Dwyer Instruments, Inc.
CIRCLE NO. 39 ON READER REPLY CARD
CABLESAlpha Wire offers a variety of cables ap-proved by UL as Wind Turbine Tray Cable. These cables will feature a 1000-volt rating with an operating temperature range of –50°C up to 200°C, depending on the specific materials used. The cables are well suited to applications involving power distribution, control and monitor-ing within the wind turbine. They are available in a range of different insulation and jacket materials, a variety of shielding options as well as optional approvals: sun-light resistance, oil-resistance and FT-4 or IEEE 1202 flame resistance.Alpha Wire Company
CIRCLE NO. 40 ON READER REPLY CARD
MASTER DISCONNECT SWITCHThe High-Amp DP Master Disconnect Switch can handle 125A (each pole), at up to 36 V DC and is engineered for use in a variety of vehicle applications. It can be used in two ways; first, because it is a DC switch it may control two independent cir-cuits. Due to the switches capacity, this single switch handles a job meant for two, thus offering a solution to controlling large motors. Secondly, this switch is capable of switching one load, but disconnects two parts of the same circuit. This totally shuts down the load circuitry and gives the users a completely safe disconnect.Cole Hersee Company
CIRCLE NO. 41 ON READER REPLY CARD
cien feb 09 pg 09.indd 9 1/30/09 9:14:36 AM
10 february 2009 www.cienmagazine.com focus on ... electrical/electronics
CONTACTORThe KILOVAC LEV100 contactor of-fers hermetically sealed construction for intrinsically safe operation in explo-sive and harsh environments. Rated for 100A at 900 VDC, the contactor uses an inert gas in the contact chamber and an epoxy-sealed resin case to provide long-term reliability. Contacts will not oxidize or become contaminated even during long periods of non-operation. Isola-tion of 8 kVdc across the open contacts permits use for high-voltage isolation. The compact package, occupying only about four cubic inches, is not position sensitive to allow flexible application. The contactor is available in bottom-mount and side-mount configurations. Tyco Electronics
CIRCLE NO. 50 ON READER REPLY CARD
POWER RESISTORTT electronics IRC has developed a cylindrical surface mount power resistor with enhanced precision specifications. Designated the PPC Series, the compon-ent merges the high surge capability (up to 1500W for 1 millisecond) of IRC’s renowned CHP Series with enhanced operational precision from tight TCRs. The surface mount thick film power re-sistor with tolerances to 0.1% at TCRs of 25ppm/°C. The PPC Series resistor is ideal for those high power and pulse applications that cannot trade accuracy or stability for power dissipation. The PPC Series precision power resistor is ideal for power supply, industrial elec-tronics and instrumentation applications.IRC, Inc.
CIRCLE NO. 55 ON READER REPLY CARD
LASER BARSAs part of its “BRILASI” research project, OSRAM has improved the performance parameters of laser bars (laser chips). The result is a new generation of laser bars for pumping of solid-state lasers and direct material processing. The main applica-tions of these laser bars include pump-ing of solid-state lasers and direct ma-terial processing. In addition to laser bars with a wavelength of 910 to 980 nm that achieve an efficiency of 70% at 120W, OSRAM will produce laser bars with wavelengths of 808 nm and 880 nm which will deliver an efficiency of 62% at 120W. OSRAM Opto Semiconductors
CIRCLE NO. 53 ON READER REPLY CARD
JUNCTION BOX ASSEMBLIESITT’s VEAM junction box contains a complete harnessing system, includ-ing terminal blocks, cables and electrical components for inter-vehicle connections as well as power and signal connections. The VEAM interconnects are also avail-able in a wide range of shell sizes and con-tact arrangements for integrating power and signal connections, and are suitable for either standard or harsh environ-ments. The junction box and its com-ponents are ideal for control switchboard connections between vehicles, tilting sys-tems, CCTV equipment, inter-vehicle connections, power and signal connec-tions, and motor supplies up to 660A.ITT Interconnect Solutions
CIRCLE NO. 54 ON READER REPLY CARD
FIBER OPTIC CABLEkeeps steel fabrication flowing
The production of building systems has become increasingly sophisti-cated and customer driven in recent
years, incorporating integrated data communications and dynamic manufac-turing systems to meet demands for timely and customized deliveries.
New Millennium Building Systems seeks to not only achieve those standards but also to gain a competitive advantage by continually raising customer expecta-tions to a level that is difficult for rival suppliers to reach. This entails offering the right variety of products and main-taining agility in production processes so that customers know they can depend on quality and scheduled deliveries.
New Millennium, a wholly owned sub-sidiary of conglomerate Steel Dynamics, Inc. manufactures a range of steel joists, girders, and decking for non-residential construction projects. In 2006 Millennium purchased joist-maker John H. Hancock and decided to renovate and expand the newly acquired operation in order to im-prove customer service and increase com-petitive pricing, plus expand product and geographic coverage. Five manufacturing plants now share resources and coordinate efforts to be the most customer-oriented joist company serving North America.
”Our expansion program involved not only construction and renovation, but also system upgrades,” explains Ricky Gillenwater, IT Director at the Salem facility. “We recognized early on that this would depend on advanced capabilities in data communications, which in turn would require the right communica-tions infrastructure — fiber optic cab-ling throughout all the structures in our complex.”
To accomplish this, Gillenwater’s team contracted with Professional Network Services, Inc. (PNS), a full-service voice and data integration provider. PNS is a specialist in physical layer copper and fiber optic cabling, LANs and WANs, including wireless networking, PBX and other communications systems.
”As part of the renovation project, New Millennium wanted to upgrade its voice and data network,” explains Don Daniel, PNS Area Sales Manager and Executive Project Manager. “That included laying fiber optic on their campus to connect five manufacturing buildings with the main
office facility, where the IT resources were based.”
However, the expansion of manufactur-ing facilities absorbed the existing office
building, so a new one had to be built on the adjacent property. In the meantime, office facilities had to be housed in tem-porary modular structures. That meant
temporarily installing fiber optic cabling between those buildings and the manufac-turing plants.
”That expedited the installation of our networks within the manufacturing sites,” Gillenwater says. “We were able to get our fiber backbones in and connect them with the copper connections to our TLC (Total Logistic Control) based computers and other devices. That way we hit the ground running.”
Daniel saw no problem with the temporary fiber installation. His firm is a reseller of Optical Cable Corporation (OCC), which manufactures a broad line of cables and accessories and has distribu-tors in Quebec and Vancouver. . By using OCC ruggedized fiber optic cable, PNS could easily handle installation stresses as well as environmental and mechanical stresses over time.
The temporary fiber cable installation was easy to relocate to New Millennium’s new headquarters building once construc-tion was completed. Now fiber cable runs from the main office to each of the plants and the satellite office. Each fiber optic branch acts like a main distribution hub in each of the manufacturing facilities. In the main production facility copper wires branch off the hub into different areas where they are connected to workstations and PCs supporting TLC programs.
”Running the fiber out there has given us the ability to report our production real time,” Gillenwater explains. “We also create bundle tags, bar code labels that are generated from the data that is pushed down to those machines from the main office. The network enables us to stay cur-rent with our inventory on hand and just gives us a better handle, from the office, on what’s going on in the plant.”
Gillenwater adds that production is now scheduled out in the plant, and everything flows in line from there. Actual production data is reported back to the office.
”We are also pushing data down to the machines,” he says. “We are in the process of sending information to the machines so that they can actually function off that data rather than having to key in the data.”
Gillenwater says that the new fiber-based approach to data communications is having a dramatic effect on business capabilities. He says that not only is production capacity improved, but so is turnaround. And that means a higher level of customer satisfaction.Optical Cable Corporation
CIRCLE NO. 95 ON READER REPLY CARD
Rugged fibre optic cabling cn easily handle installation stresses, as well as, environmental and mechanical stresses over time.
Cross section of the Optical Cable Corporation ruggedized cable
Optical Cable Corporation (OCC) provides high-speed data networking via rugged fiber-optic cabling that enables the sharing information and increases production capacity.
cien feb 09 pg 10.indd 10 1/30/09 9:15:17 AM
SINGLE-PHASE UPSThe UniStar P series single-phase online Uninterruptible Power Supply (UPS) is now available in rack mounted designs for industrial, commercial and office environ-ments. This true on-line double-conver-sion UPS is available in 6kVA models, to protect from outages and irregularities in incoming line voltages from 160 to 280 VA at 45 – 65 Hz. Up to four UniStar P modules can be installed in parallel for redundancy or additional capacity. The UniStar P is suitable for many industrial and process applications, as well as for servers and networks, telecommunica-tions equipment, medical imaging equip-ment or any sensitive electronic devices.Staco Energy Products Company
CIRCLE NO. 46 ON READER REPLY CARD
INTERCONNECT SOLUTIONSThe Powerpole “T-Pak” features a two-way electrical splitter for one incoming circuit and two outgoing circuits. It is de-signed to work exclusively with the four position Powerpole Pak connectors. The unit effectively splits the current from one incoming circuit into two, outgoing circuits. It is made of high-impact and corrosion resistant black thermoplastic and comes preassembled for a 20A, 3-phase AC configuration. Two mounting holes are provided to allow the unit to be mounted in any location. The “Y-Pak” al-lows for easy installation, connection and disconnection of electrical equipment and provides security in applications where shock and vibration may be severe.Anderson Power Products
CIRCLE NO. 47 ON READER REPLY CARD
SPD MODULESThe Strikesorb Surge Protection Devices provide protection from over-voltage and other transient voltage activity for elec-tronic automation and control equip-ment. The SPD modules are available in a variety of application-specific voltages and packaging configurations to protect highly sensitive equipment and electron-ics. The Strikesorb modules meet the de-manding requirements of the internation-al IEC 61643-1 standard and the recently (2007) revised UL-1449 (2nd edition) standard without the use of fuses. Because the Strikesorb modules have successfully passed 3-cycle testing at available short circuit currents of up to 85kA rms, they can be integrated within the panelboards, switchboards, switchgear, automation and motion control centers without conduct-ing additional UL testing. Raycap Inc.
CIRCLE NO. 48 ON READER REPLY CARD
INDUSTRIAL ETHERNET CABLESBelden has expanded its comprehensive line of DataTuff Industrial Ethernet cables for industrial data networks and plant floor control. Belden Category 5e DataTuff Shielded Twisted Pair Con-tinuous Flex cable –Product No. S17938A – is rated for use in continuous motion machinery, such as C-Track and festoon systems, as well as robotics frequently used in discrete manufacturing and auto-mated assembly lines. Belden Category 5e DataTuff Shielded Twisted Pair cable – Product No. 7939A – features a flexible, stranded and shielded construction to re-sist machine and plant floor vibration, along with superior noise immunity.Belden
CIRCLE NO. 49 ON READER REPLY CARD
www.masterbond.com [email protected]
Outstanding customer service Widestselection – over 3,000 grades One- and
two-part systems Available in small to largesystems Environmentally friendly
Manufactured to strictest quality controlstandards Replacements for competitors’
discontinued products Convenient, easy-to-use packaging
154 Hobart St., Hackensack, NJ 07601Tel: 201-343-8983 Fax: 201-343-2132
HOW TO SAVE TIME ANDELIMINATE WASTE INADHESIVE BONDING
APPLICATIONSContact Master Bond Today –
We Have The Technical Expertise You NeedEPOXIES • SILICONES • CYANOACRYLATES
URETHANES • UV CURES • ANAEROBICS
4823 3.375 x 4.875:4823 3.375 x 4.875 1/22/09 9:47 AM Page 1
LINE DIFFERENTIAL SYSTEMThe Multilin L30 Line Differential Sys-tem delivers current differential protection for high-speed, sub-transmission and dis-tribution lines and cables. The L30 offers utilities sophisticated protection, com-prehensive communications, embedded IEC 61850 process bus support and ad-vanced metering and synchrophasor moni-toring. The L30 is equipped with advanced sensitive and segregated line differential protection and a full suite of integrated back-up protection, making it suitable for medium voltage underground cables. With programmable logic to build custom con-trol applications, the L30 delivers seamless communications and interoperability, eli-minating the need for point-to-point wir-ing and auxiliary devices.GE Digital Energy
CIRCLE NO. 42 ON READER REPLY CARD
WLAN SOFTWAREDesigned to compliment Siemens Sca-lance™ wireless LAN, SINEMA E (SI-MATIC Network Manager Engineering) scalable software simplifies the task of in-stalling and starting up a WLAN net-work. The software visually simulates sig-nal coverage, data transmission rate, signal-to-noise ratio and access point overlapping of a wireless LAN network, while accounting for environmental con-ditions and device parameters. SINEMA E is available in three scalable licenses – Lean, Standard and Powerpack.Siemens Energy & Automation, Inc.
CIRCLE NO. 43 ON READER REPLY CARD
PILOT LIGHTDDP has developed a 16mm pilot light and LED lamp to retrofit and replace common GE ET-16 sockets. Designated PowerLink® PL16 Pilot light, the LED light includes a solid-state bayonet-based LED lamp and rugged Lexan™ lens that resists high impact for reliable perform-ance in most environments. The PL16 is designed to mount in a 16mm hole and features a thin, compact, insulating poly-ester housing for added protection in tight fitting spaces. Available in 24V, 48V or 120V designs, the PL 16 features pre-mium-engineered thermoplastics that keep the light units running cool while providing a high light intensity.DDP
CIRCLE NO. 44 ON READER REPLY CARD
EMERGENCY LIGHTINGLuna Glow is an emergency lighting solu-tion that doesn’t rely on main power or batteries, requires no testing or mainten-ance and is 100% failsafe. Offered in T12 or T8 sizes, Luna Glow’s translucent, tubular design slips easily over an existing fluorescent lamp. Held in place with pro-vided end caps, it then “soaks up” energy from the powered lamp. When the lights go out – for whatever reason – Luna Glow immediately activates and provides its “stored” photoluminescent illumination for quick, safe and orderly evacuation. There is no wiring, tools, batteries or maintenance. Quick and easy installation and automatic activation make the units suitable for any enclosed area that may need to be evacuated in an emergency.Shat-R-Shield
CIRCLE NO. 45 ON READER REPLY CARD
focus on ... electrical/electronics
CIRCLE NO. 112 ON READER REPLY CARD
www.cienmagazine.com february 2009 11
cien feb 09 pg 11.indd 11 1/30/09 9:16:05 AM
12 february 2009 www.cienmagazine.com focus on ... enclosures
Need accurate, up-to-datepower transmissionsuppliers & service
Need accurate, up to datepower transmissionsuppliers & service
contact information?contact information?CALL US TODAY
(416) 510-6799or 1-888-542-4321We’ll put you in touch withthe right people!
CALL US TODAY
(416) 510-6799or 1-888-542-4321We’ll put you in touch withthe right people!
(Also Available - accuratecontact & business
information on equipmentmanufacturers, distributors,
wholesalers and agents,transportation, and much
more.)
MECHANICAL HYGROSTATOmega’s new series of Mechanical Hygro-stat is designed to control the relative air humidity inside of enclosures. When con-nected to an enclosure heater, (dehumidi-fier), it will turn the heater on at the set humidity level in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion. The MFR012 has a high switching cap-acity and is DIN rail mountable. This CE compliant product can also be used to control cooling fans, warning lights or other devices.OMEGA
CIRCLE NO. 56 ON READER REPLY CARD
COOLED ENCLOSUREIntertec introduces a passively cooled en-closure that exploits a novel phase-change material to maintain the temperature of electronics equipment at 10 degrees lower than peak ambient temperatures. Requir-ing no power supply to operate, this stan-dard cooling enclosure has enough inter-nal space to meet common application requirements, such as the pressure trans-mitters and process analyzers used on oil and gas pipelines running in environ-ments with temperature swings.Intertec
CIRCLE NO. 57 ON READER REPLY CARD
ATR ENCLOSURES The complete line of 700 Series Air Transport Rack (ATR) rugged enclosures is engineered for maximum flexibility, durability and cooling in a range of harsh environment applications. The 700 Series ATRs are designed to protect a variety of commercial off-the-shelf (COTS) air-cooled cards, extended temperature cards and conduction cooled military grade cards in a variety of deployed environ-ments. Satisfying a variety of thermal challenges, the enclosure can be engin-eered with convection (714 Series), re-circulating air (715 Series), conduction (716 Series) or air-over conduction (717 Series) cooling methods. For added flex-ibility, the 716 Series features configur-able conducting walls to address challen-ging environmental diversities. The enclosures allow maximum flexibility in configuration of size, cooling and power requirements.Carlo Gavazzi Computing Solutions
CIRCLE NO. 58 ON READER REPLY CARD
ENCLOSURE OPTIONLenze-AC introduces Polycarbonate Plastic NEMA 4X (IP65) enclosures for the SMVector Inverter. It is suitable for industries such as food and beverage or chemical processing, where drives need to be protected against dust, dirt and the harmful effects of water and corrosion. The enclosure is intended for both indoor and outdoor use, is NEMA 4X (IP65) rated, corrosion and UV resistant and has an improved resistance to low temper-ature impact.Lenze – AC Tech
CIRCLE NO. 59 ON READER REPLY CARD
PURGE/PRESSURIZATIONThe 6000 Series Purge Pressurization System comes with all Bebco family sys-tem features as standard, is user-configur-able to satisfy particular applications, and can be used with enclosures up to 7.1 cu. M of volume. It is also universal certified to all applicable updated standards for both Gas and Dust hazardous atmos-pheres. This Type X/Ex px purge/pres-surization system features an intuitive programming screen that allows the user to quickly and easily configure the system to meet their specific application needs, and to monitor the status of the system’s pressure, flow and operation. This elim-inates the need for the user to specify all their application requirements at time of order. The 6000 series is a complete pur-ging system that contains the controller, pneumatic, electrical I/O and program-ming interface housed in a durable type 4X, IP66-rated housing.Pepperl+Fuchs
CIRCLE NO. 60 ON READER REPLY CARD
WIFI ENCLOSURESBelden announces the launch of Indoor and Outdoor WiFi enclosures designed to provide optimum security for the re-mote placement of the Belden Wireless Solution’s XtraThin Access Points (APs). The compact, aesthetically pleasing en-closures are robustly constructed to fully comply with the physical or climate-re-lated requirements of indoor or outdoor AP installations. The enclosures are NEMA-rated and RoHS compliant. They provide protection against tampering, theft and environmental damage.Belden
CIRCLE NO. 61 ON READER REPLY CARD
COOLING SYSTEMSVortex A/C™ cooling systems for elec-trical enclosures require only a com-pressed air supply to operate. It quickly installs on electrical control panels to maintain enclosure temperature within a range of 27°C to 32°C. The 5000 BTUH Vortex A/C model features dual vortex tube cooling units, each with its own reli-able mechanical thermostat to provide two-stage levels of refrigeration. To con-serve energy, the first stage offers 2500 BTUH cooling capacity and, if needed, a second stage activates to double the sup-ply of refrigerated air to the enclosure. The “no downtime”, maintenance-free units incorporate vortex tube technology to convert filtered compressed air into a low pressure, refrigerated air stream dis-tributed throughout the enclosure.Vortec – ITW Air Management
CIRCLE NO. 62 ON READER REPLY CARD
WALL-MOUNT CABINETThe ACCESSPLUS® II Type 1 Wall-Mount Cabinet is a double-hinged cab-inet that pairs security and accessibility to provide sophisticated cable management for networking applications. It offers an increased load capacity, handling network equipment weighing from 250 to 500 lbs. and available in a variety of cabinet sizes. It features latch-free sides to permit flush-mount installations in tight spaces and corners, and it provides easy one-person mounting to save time. Along with solid door models ACCESSPLUS II offers tinted safety glass door options – which deliver greater clarity and scratch resist-ance than plexiglass.Hoffman
CIRCLE NO. 63 ON READER REPLY CARD
6-SLOT TCA SHELFThe Asis Perform Series 6-slot Advanced TCA shelf is specifically designed to high-density systems. It provides space for 6 node ATCA blades in a 6U shelf making it well-suited for telecom and data com-munications products that require high availability, fault management, and real-time performance. Moreover, HUB func-tionality is already integrated in the stan-dard shelf management boards. Asis
CIRCLE NO. 64 ON READER REPLY CARD
cien feb 09 pg 12.indd 12 1/30/09 9:18:40 AM
www.cienmagazine.com february 2009 13Industrial Literature ReviewsVIBRATORY SELECTION GUIDE
Presents Eriez’ complete vibratory product line in an easy-to-use manner, with a broad overview to help select the proper equipment. Eriez’ in-novations provide for a large array of feeding and conveying equipment op-tions. www.eriez.comEriez
FREE CATALOGUE CIRCLE NO. 81
BOKER’S FREE 2009 WASHER CATALOGUEBoker’s FREE Washer Cata-logue has over 23,000 non-standard sizes avail-able with no tooling char-ges. Outside diameters of 0.080” to 5.140”, a wide range of IDs and thick-nesses, and 2,000 material variations provide millions of possibilities. Materials include low-carbon sheet steel, five types of spring steel, stainless steel, alum-
inum, brass, copper, nickel, silver and non-metallics. ISO 9001:2000 registered. www.bokers.com/cienBoker’s Inc.FREE CATALOGUE CIRCLE NO. 83
MINIMIZE OVERSPRAY AND WASTENew AutoJet® Model 1550 Modular Spray System from Spraying Systems Co. ensures accurate, precise place-ment of the liquid being sprayed to minimize waste and quality control problems. This easy-to-use, compact system pro-vides automatic on/off control of spray nozzles and is ideal for coating,
lubricating and marking operations. www.spray.comSpraying Systems Co.FREE CATALOGUE CIRCLE NO. 82
VACUUM CUPS AND ACCESSORIESNew Vi-Cas catalogue features replacement vac-uum cups for lifters, ma-nipulators, pick-and-place systems, packaging, label applicators, and more. Thousands of styles and sizes are detailed in ma-terials to suit any applica-tion. Custom cups quoted from customer-supplied drawings, or reverse en-gineering from customer-
supplied cups. Visit us at www.vi-cas.comVi-CasFREE CATALOGUE CIRCLE NO. 84
EXHAUST FANS, IMMEDIATE DELIVERYN.R. Murphy carries a large inventory of indus-trial Exhaust Fans in a vast range of sizes. The most popular designs, arrangements and sizes are fully built and ready to ship. When an unusual requirement turns up, they have the experience and manufacturing cap-acity to quickly modify or build a new fan. Free
catalogue includes N.R. Murphy’s line of fans, speci-fications and guidelines. www.nrmurphy.comN.R. Murphy Ltd.FREE CATALOGUE CIRCLE NO. 86
TACTILE SURFACE PRESSURE INDICATING SENSORPressurex® reveals pres-sure distribution and magnitude between any two contacting or impact-ing surfaces. Pressurex® is a thin sensor film that in-stantaneously and perma-nently captures a pressure profile “snapshot” by virtue of its changing colour. Conceptually simi-lar to Litmus paper, the
colour Pressurex® turns is directly proportional to the amount of force applied. www.sensorprod.comSensor Products Inc., USAFREE CATALOGUE CIRCLE NO. 85
POWERFUL STATIC ELIMINATORSEXAIR’s Super Ion Air Knife™ removes static electricity from webs, sheet stock and plastic surfaces where dust, tear-ing, jamming or hazard-ous shocks are a problem. The balanced laminar airflow of the Super Ion Air Knife effectively eliminates static at dis-tances of up to 20 feet away. Production speeds,
product quality and surface cleanliness can improve dramatically. www.exair.comEXAIR CorporationFREE CATALOGUE CIRCLE NO. 87
LISTA INTERNATIONAL OFFERS NEW GENERAL STORAGE CATALOGUELista International Corporation introduces its new, full-colour 124-page General Storage Catalogue, featuring the most up-to-date informa-tion about Lista’s exten-sive range of storage systems and accessories, including details about Lista’s redesigned, exclu-
sive suspension system. www.listaintl.comLista International CorporationFREE CATALOGUE CIRCLE NO. 89
RedHat NEXT GENERATION VALVE CATALOGUEThe RedHat Next Generation Valve line sets new industry standards for reliability and power consumption. With new power management technology and robust advanced electronics, the valve accepts both AC and DC voltages while improving performance. These valves are available
with Class I, Division 2 approval. www.ascovalve.caASCOFREE CATALOGUE CIRCLE NO. 88
focus on ... enclosures
POWER DISTRIBUTIONThe FirstLine® OC power distribution cabinet is customizable to fit virtually any application. It reduces installation time by providing maintenance bypass, branch circuit distribution and voltage transformation in a single cabinet. With up to 96 branch circuit breakers with or without main panel disconnect circuit breakers, the FirstLine® OC simplifies the installation, moving or changing of electrical equipment. UL 1778 listed, it is suitable for power distribution needs within data centers, industrial plants, commercial facilities, lighting applications, and more.Staco Energy Products Co.
CIRCLE NO. 65 ON READER REPLY CARD
19” RACK-MOUNTED SYSTEMRittal’s 19” rackmounted system – SlimBox Vario – is a solution for small electronic enclosures. The enclosure has a spacesaving design with integrated power supply and climate control functions. The SlimBox Vario housings are 300 mm deep and designed for the installation of cPCI, cPCI Express, VME64x boards of 3U, 6U or rear I/O boards. Due to the horizontal arrangement of the equipment, twice the number of functional components may be integrated on 1, 2, 3 or 4 U. Two slots per U are available at the front and rear. The housings contain a backplane for VME64x or cPCI. Optionally, housings can be customized using a range of standard components.Rittal Systems Limited
CIRCLE NO. 66 ON READER REPLY CARD
AIR CONDITIONERSThe Profile Guardian Series DP33, DP43 & DP47 Panel Mounted Air Conditioners are designed to cool the interior of electronic cabinets. With capacities ranging from 5,000 to 9,000 BTU/H, these NEMA 4/4X rated air conditioners are ideal for both indoor and outdoor applications where weather and corrosion resistance is required. Epoxycoated condenser coils and painted galvanized sheet metal in the Profile Guardian models allow them to be used in corrosive and other hostile environments. The NEMA 4X interface makes these models suitable for applications such as Food and Beverage processing plants. Kooltronic, Inc.
CIRCLE NO. 67 ON READER REPLY CARD
FAN TRAY BLOWERFor design engineers looking for a compact cooling solution for rackmounted industrial enclosures and electronic equipment cabinets, Orion Fans has developed a dual fan tray blower assembly designed to mount directly into standard EIA 19” rack cabinets. Designated the OMB5200120 Series, the fan tray assembly delivers 340 cfm of directed airflow and features a cleanable/replaceable aluminum mesh filter. Knight Electronics
CIRCLE NO. 68 ON READER REPLY CARD
cien feb 09 lit pg 13.indd 13 1/30/09 9:19:32 AM
14 february 2009 www.cienmagazine.com
DUCT TAPEScapa 448 is a high tack duct tape for industrial maintenance and general pur-pose taping. This product is easily torn by hand and offers excellent bond strength to a wide variety of substrates including poly films. Scapa 448 performs consist-ently over a wide range of temperatures without “edge ooze” and will not twist or curl during application. The product can be used for taping metal ductwork, hang-ing poly sheeting, general purpose bund-ling and sealing, and in a variety of indus-trial maintenance applications requiring increased tensile strength and adhesion.Scapa North America
CIRCLE NO. 71 ON READER REPLY CARD
ELECTRONIC LATCHING VALVEClippard’s 2- and 3-way electronic latching valve features a small, compact design, quiet operation, a single moving element and more. A careful balance of forces – through the precise placement of a permanent mag-net in the valve core – produces a bi-stable valve. A short pulse of current opens the valve, which “latches” open indefinitely after the current stops with no power re-quired. A subsequent pulse of current in the opposite direction closes the valve. Various connector, mounting, voltage, port, orifice and seal options are available.Clippard Instrument Laboratory, Inc.
CIRCLE NO. 72 ON READER RELY CARD
ENGINE TACHOMETERWhen using the HT-6100 engine tach-ometer in combination with an Ono Sokki detector, rpm measurement can be performed on virtually any engine type. It is used for research and/or production measurement of rpm on gasoline and diesel engines (two and four cycle engines having from one to eight cylinders). The HT-6100 uses a large 5-digit LCD with backlight to display the actual rpm being captured and with a measurement range of 120 to 20,000 rpm. A large array of detectors and detection methods support measurement on various engine types.Ono Sokki Technology Inc.
CIRCLE NO. 69 ON READER REPLY CARD
ROTARY LASERSThe family of self-leveling rotary lasers is built with a covered rotary head cage. DeWALT designed the head cage with multiple thin struts that surround the head in order to maintain durability and minimize blind spots. The DW078 and DW079 are designed with an automatic horizontal self-levelling system that pro-vides accuracy at plus or minus 1/8” per 100’. Easy to read X and Y LED lights flash while the laser is levelling. Once the unit is level, a solid LED beam will ap-pear. The DW074 is designed with an automatic horizontal self-levelling system that provides accuracy at plus or minus ¼” per 100’.DeWALT
CIRCLE NO. 70 ON READER REPLY CARD
new products
April 20-22, 2009 Health & Safety Canada 2009, IAPA, Metro Toronto Convention Centre, Toronto, ON 1-800-406-4272; (905) 614-4272; Fax: (905) 614-1414; e-mail: [email protected]; www.iapa.ca
May 12-14, 2009 Advanced Manufacturing Expo, Society of Manufacturing Engineers (SME), Place Bonaventure, Montreal, Quebec 888-322-7333; www.pmds.ca & www.simu.ca
May 12-14, 2009 Plant Maintenance & Design Engineering Show, Society of Manufacturing Engineers, Place Bonaventure, Montreal, Quebec 888-322-7333; www.pmds.ca & www.simu.ca
May 28-30, 2009 The 2009 PTDA Canadian Conference, Sheraton Falls-view Hotel & Convention Center, Niagara Falls, ON 312-516-2100; Fax: 312-516-2102; [email protected]; www.ptda.org
June 16-18, 2009 Western Manufacturing Technology Show, Society of Manufacturing Engineers, Northlands Park-AgriCom, Edmonton, Alberta 888-322-7333; www.wmts.ca
October 19-22, 2009 Canadian Manufacturing Technology Show (CMTS), Society of Manufacturing Engineers, Direct Energy Centre, Toronto, ON www.cmts.ca
Event Updates
Index of AdvertisersRS# ADVERTISER PAGE#
115-120 Automation Direct . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
113 Bird-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
103 BluCo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
105-109 Carr Lane. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
102 Cords Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
104 Hammond . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
112 MasterBond. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
101 Omega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
110 Parker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
114 Spraying Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
111 Thomas & Betts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SCREW RAILThe updated ScrewRail® combines drive and support/guidance components in a single, compact coaxial design to save space. It is currently being used in appli-cations for a number of industries, includ-ing medical, data storage, semiconductor, industrial machinery, printing/plotting and general automation. By eliminating the need for external rail-to-screw align-ment, the ScrewRail simplifies the de-sign, manufacturing and assembly of mo-tion systems. The ScrewRail comprises a precision rolled lead screw, supported by sealed bearings and contained within a concentric steel guide rail, which drives an integrated nut/bushing. The ScrewRail has recently been upgraded with a metal-reinforced bushing, providing increased strength and stability.Kerk Motion Products
CIRCLE NO. 75 ON READER REPLY CARD
CIRCUIT BREAKERThe Guard Family of circuit breakers features an electronic chip plus magnetic control to provide precise overload pro-tection and allows the user to achieve the exact trip time that the application demands. The circuit breaker is suitable for a range of applications, including sta-tionary and portable generators, telecom equipment, industrial machines, medical equipment, welding machines, control-lers, elevators, transportation equipment, air conditioners and power tools. Its fast-action magnetic trip can resist any high inrush set-up, providing maximum short circuit protection. The circuit break-ers feature stable electrical parts that are 100% sealed and insulated from variable environments and conditions like mois-ture, vibration, chemicals and dust. The Guard Family is available in 1 to 4 poles.Master Distributors
CIRCLE NO. 76 ON READER REPLY CARD
ID READER SOFTWAREWith the new release 3.2, DataMan 100 fixed-mount ID readers can now simul-taneously read up to 128 codes in a single field of view – even with mixed code types – opening up many new application possi-bilities. In addition to the new multicode feature for the DataMan 100 Series, re-lease 3.2 provides improved performance on all DataMan models for QR codes having perspective distortion, especially with high-contrast labels. The 3.2 release also includes support for VeriCode® for customers who purchase a license key from Veritec, Inc.Cognex Corporation
CIRCLE NO. 73 ON READER REPLY CARD
LINEAR ACTUATORSThe ELZex Modular Linear Actuator series meets ATEX 95 explosion area testing certification for caustic environ-ments. The heavy-duty rodless design is belt-driven and features an anti-static HTD (High Torque Drive) belt. The design features stainless steel guide rods that work in conjunction with adjustable track rollers to maintain consistent con-tact with the stainless steel guide rods; thus, preventing potentially explosive electric arcing discharge. The modular linear actuators are available in a wide-range of sizes. They can be easily modi-fied in several ways to meet the client’s design requirements. Stroke-lengths up to several hundred feet are available. Additionally, the anti-static HTD belt is steel reinforced and minimizes backlash on reversal; the minimized backlash of-fers repeatability of +/-0,1mm.Nook Industries
CIRCLE NO. 74 ON READER REPLY CARD
800-662-5021300 N. Elizabeth St. • Dept. CIEChicago, IL 60607312-BAN-BIRD • FAX 312-226-2480 WWW.BIRD-X.COM/CIE
• TOUGH• FLEXIBLE• ECONOMICAL• EASY TO INSTALL
SPIKES NEEDLE STRIPSWITH
THE BIRD CONTROL “X-PERTS” SINCE 1964
Get Ridof Birds!
Guaranteed to getrid of birds, and the messand diseases they bring.
World’s most complete line of bird control products - an effective
solution for ANY bird problem.
Call forcompetitivequote!
SPK_3.5 x 2.25 4/C 12/17/04 1:05 AM Page 1
CIRCLE NO. 113 ON READER REPLY CARD
cien feb 09 idx pg 14.indd 14 1/30/09 10:13:04 AM
Experts in Spray TechnologySpray
NozzlesSpray
ControlSpray
AnalysisSpray
Fabrication
Replacing manual cleaning with our motorized tank washers eliminated ongoing contamination problems and lowered operating costs for one manufacturer. Annual savings of $30,000 were reported on labor and downtime.
1-800-95-SPRAY | spray.com | Specify and order standard nozzles spray.com/ispray
AutoJet® Tank Cleaning System provides automated timing control and chemical injection
Threadless design on fluid-driven 28500 nozzles prevents build-up
Tank wash lances can be customized for any tank wash nozzle
Controlled rotational speed improves the cleaning impact of Rokon nozzles
SprayCheck™ TW detects pressure loss, clogging and rotation for cleaning validation
Change the Way You Spray To Clean Tanks FasterWe have dozens of ways to get tanks cleaner in less time. Our full range of solutions can:
Reduce labor, water, chemical and wastewater disposal costs
Minimize downtime and improve worker safety
Ensure process integrity for compliance
Choose from fixed or fluid-driven tank wash nozzles, high impact motorized units, retractable tank washers and fully automated systems.
Learn more at spray.com/tankwash Request these helpful publications or visit our web site for more information on automated tank cleaning.
A Guide to Safe and Effective Tank Cleaning, Catalog 15
Tank Cleaning Automation White Paper, Bulletin 526
Now Buy Direct! Call 1-800-95-SPRAYPurchase directly from Spraying Systems Co.
Factory-direct pricing on the same quality products you already know
Spray nozzles, showers, headers, lances, automated systems and testing services
Buy online 24/7 at spray.com/ispray
CIRCLE NO. 114 ON READER REPLY CARD
cien feb 09 pg 15.indd 15 1/30/09 9:20:09 AM
Choose from MTW, THHN and TFFN styles in themost common gauge sizes and colors
• 4 to 18 gauge wire in 500 and 2500-ft. reels• All colors and sizes in stock, starting at $29
for 500-ft. spool• FREE shipping on orders over $300 (shipped
standard ground; LTL extra to Canada)
www.automationdirect.com/wire
Signal and power terminal blocks forpoint-to-point wiring
• Screw-type terminal blocks in standard gray, plus seven colors for popular sizes
• Screwless terminal blocks also available• Power distribution blocks, SCCR rated
up to 200kA
www.automationdirect.com/terminal-blocks
Rigid and flexible wire duct &Liquid-tight tubing
• All rigid duct comes in 2 meter lengths, withcover, sold individually or in value packs
• Flexible duct, braided sleeving and ductaccessories available
• 30-meter liquid-tight tubing, coils in diameters from 3/8 to 2 inches
www.automationdirect.com/wiring-solutions
Over 120 to choose from• Step Drill Bits• Jobber Length Drill Bits• Drill Bit Sets• Machine Thread Taps• Metal Hole Punches
(Electrical Knockout Punches)
www.automationdirect.com/tools
Choose from the HT800 30 mm metal NEMA series,22 mm metal or non-metal IEC devices, andincandescent or LEDstacklights for panelcontrols
• Flush, extended, illuminated or non-illuminated,mushroom and guarded pushbuttons, manyavailable in multiple colors
• Pilot and push-to-test lights• Selector switches in knob, lever and
keyed versions• Stacklights in modular or pre-assembled units
www.automationdirect.com/pushbuttons_lights
Our shipping policies make it easier than ever to order direct from the U.S.!Free standard ground shipping is available for orders totaling over $300 U.S. (except for itemswhich require LTL shipping, see Web site for details).Also, save on brokerage fees when shipping standard ground to Canada - you can choose toallow AutomationDirect to nominate a broker foryour shipment for parts shipping via standardground. This can save you big on brokerage fees.See Web site for details and restrictions - www.automationdirect.com/canada
CHECK OUT OUR PRICES
Enclosures
NEMA 1 wall mount24 x 24 x 08”
NEMA 12 wall mount20 x 16 x 08”
$152.25N1C242408LP
AutomationDirectHubbell/Wiegmann
Price/Part Number
Hoffman
Price/Part Number
$205.25N12201608
$319.20A-24N24BLP
$413.60A-201608LP
*All prices are U.S. published prices. AutomationDirect prices from October 2008 Price List. Hoffman prices are taken from Hoffman Price Listdated March 3, 2008. Prices may vary by dealer. Many other part numbers are available from all vendors.
NEMA 4 wall mount20 x 20 x 06”
$266.00N4202006
$536.70A-20H20ALP
NEMA 4X wall mount20 x 20 x 06”
$634.75SSN4202006
$1,412.00A-20H2006SSLP
NEMA 4/12 wall mount36 x 24 x 08”
$263.25N412362408C
$537.60C-SD36248
3-hole 30 mm NEMA 12pushbutton enclosure
$45.50PB3
$94.12E-3PB
NEMA 12 DISCONNECTwall mount (24” x 25-3/8” x 8”)
$357.50SDN12242508
$622.60A24SA2608LP
AUTOMATIONDIRECT offers over 1,600 enclosures fromHubbell/Wiegmann across NEMA 1, 3S, 3R, 4, 4X,6P, 12 and 4/12, and 13 ratings. Choose from a fullline of metallic enclosures and operator consoles;our non-metallic line is designed for harsh outdoorenvironments requiring NEMA 3R or 4X ratings. A full line of accessories, including subpanels, locksand latches, and floor stand kits, is also available.
Also get great prices on steel and stainless steelflanged enclosures for mounting disconnects fromall the major manufacturers, including the FerrazShawmut line sold by AutomationDirect.
30-day money-back guaranteeOrder with the assurance of our unconditional 30-daymoney-back guarantee on enclosures.
For complete information or to order online, visit: www.automationdirect.com/enclosures
1-800-633-0405
www.automationdirect.com
0902_Enclosures_CIEN_TAB:PLCIO 12/30/2008 1:50 PM Page 1
CIRCLE NO. 120 ON READER REPLY CARD
CIRCLE NO. 115 ON READER REPLY CARD
CIRCLE NO. 116 ON READER REPLY CARD
CIRCLE NO. 117 ON READER REPLY CARD CIRCLE NO. 118 ON READER REPLY CARD CIRCLE NO. 119 ON READER REPLY CARD
cien feb 09 pg 16.indd 16 1/30/09 9:20:40 AM