Telecoms
Cable Protection SystemsDucting Systems
2010
CPS/TELDS 11/10
Stockist Stamp
2011
Pioneers in PE Pipe Technologies
S y s t e m s
Head Office & International Sales
Radius Systems LtdRadius House, Berristow LaneSouth Normanton, Alfreton, DerbyshireDE55 2JJ, UKt: +44 (0)1773 582329e: [email protected]
N. Ireland and Rep. of Ireland Sales
Radius Plastics LtdScarva Road Industrial EstateBanbridge, Co. DownBT32 3QD, UKt: +44 (0)28 4066 9999e: [email protected]
Middle East Sales
RadiusSenaat (Piping and Fittings) LLCICADBusiness Hub B206MussafahAbu Dhabi, UAEt: +971 2 5503277e: [email protected]
The content of this publication is for information only. Such information is given in gooth faith and Radius Systems accepts no liability for its content.
www.radius-systems.com
HDPE Twin Wall Ducting
A lightweight, high strength main duct system providing excellent cable protection and fast underground installation.
Corrugated on the outside, smooth on the inside, twin wall HDPE (High Density Polyethylene) duct has a high static and dynamic load bearing capacity combined with high impact resistance. The smooth inner bore combined with the lower frictional co-efficient of HDPE, reduces the effort required to install long lengths of sub-duct and cable.
Fast and easy installation
Resistance to compression type 450N and 750N
Lightweight with high ring stiffness
Flexible — less joints required
Easily repaired
Environmentally friendly
HDPE Low Friction Ducting
A high performance low-friction HDPE sub-duct system providing excellent cable protection and management for underground and aerial networks. The tough outer HDPE coating provides lifetime mechanical protection while the internal solid polymer coating provides permanent lubrication and a low coefficient of friction for optimised lengths of cable installation.
Low friction permanent coating
Tough, durable HDPE
High performance in complex installations
(for example many bends and gradients)
Available empty, pre-roped, pre-taped or pre-cabled
•
uPVC Ducting
A solid wall main duct system manufactured from unplasticised polyvinyl chloride (uPVC). A durable high quality construction, uPVC ducting is manufactured with performance criterias to meet customer and industry standards.
Durable
High quality construction
Resistance to compression
Manufactured to recognised industry standards
�
Telecoms Ducting Systems
Telecoms Ducting Systems
�
HDPE Low Friction Ducting
High Performance Low Friction DuctOD/ID Nom. OD Wall thickness Max Pull Load(mm) (mm) Min (mm) (kN)
Light Duty (SDR17.5) — for sub-duct applications
Direct Install
20/18 17.9 1.0-1.3 1
25/22 22.3 1.3-1.6 1
26/23 23.1 1.4-1.7 2
31/27 27.7 1.6-1.9 2
32/28 28.5 1.7-2.0 2
37/32 32.7 1.9-2.3 3
38/33 33.8 2.0-2.4 3
40/35 35.6 2.1-2.5 4
44/39 39.2 2.3-2.7 4
50/44 44.4 2.7-3.1 6
53/55 55.8 3.5-3.9 10
75/66 66.5 4.2-4.6 14
General Purpose (SDR13.5) — for primary and sub-duct applicationsDirect Install and Direct Bury
20/17 17.1 1.4-1.7 1
25/21 21.5 1.7-2.0 2
26/22 22.3 1.8-2.1 2
31/26 26.7 2.1-2.4 3
32/27 27.5 2.2-2.5 3
37/31 31.6 2.5-2.8 4
38/32 32.5 2.7-3.0 4
40/34 34.3 2.8-3.1 5
44/37 37.6 3.1-3.5 6
50/42 42.8 3.5-3.9 8
63/54 54.0 4.4-4.8 12
75/64 64.1 5.4-5.8 17
Heavy Duty (SDR11) — for primary duct applicationsDirect Bury and Direct Mole Ploughing
20/16 16.1 1.7-2.0 1
25/20 20.7 2.1-2.4 2
26/21 21.5 2.2-2.5 2
31/25 25.6 2.6-3.0 3
32/26 26.4 2.7-3.1 4
37/30 30.3 3.1-3.5 5
38/31 31.4 3.2-3.6 5
40/33 33.0 3.4-3.8 6
44/36 36.2 3.8-4.2 7
50/41 41.2 4.3-4.7 9
63/52 51.8 5.4-6.0 14
75/62 61.9 6.4-7.0 20
Smooth or ribbed inner wallSupplied empty, pre-roped, pre-taped or pre-cabledFull range of standard solid colours and stripesMono duct or multiduct configurationSupplied on drums, strapped coils or straight lengthsPrint as per customer’s requirements
Low Friction
A solid layer of lubricant is evenly distributed on the inner wall by co-extrusion providing a permanent low friction surface for the life of the duct.
Low friction values allow long installation lengths of delicate fibre optic cable by pulling or blowing.
Cable
HDPE
Solid LubricantLayer
Standard Colours
The above represents most standard sizes, other OD/IDs are available on request
�
Telecoms Ducting Systems
HDPE Low Friction Ducting
Low Smoke Zero HalogenWe provide specialised Low Smoke Zero Halogen (LSZH) ducting with flame retardant properties for use in buildings and tunnelsManufactured to EN500862-4 and IEC332/1Size and colours to suit user requirements
Bundled Ducts AssembliesWe can supply duct bundles with an outersheath to suit your applications
Special RequirementsWe have the facilities to meet specific customer requirements. Our technical/development team has developed many bespoke products over the years and will be pleased to offer their expertise
Telecoms Ducting Systems
�
Size (mm) Colour Pack Qty Product Code
23.1 - 27.4 Black 12 ZA0658
29.2 - 31.7 Silver Grey 12 ZA0659
30.0 - 36.0 Aluminium 12 ZA0660
35.6 - 39.9 Green 12 ZA0661
37.6 - 43.2 Burgundy 12 ZA0662
40.6 - 47.0 Champagne 12 ZA0663
45.7 - 50.8 Navy Blue 12 ZA0664
58.7 - 63.8 Bronze 12 ZA0665
71.1 - 78.0 Brown 12 ZA0666
112.0 - 118.1 Turquoise 12 ZA0667
118.1 - 124.5 Aqua 12 ZA0668
Size (mm) Pack Qty Product Code
32 70 ZA0776
40 60 ZA0777
50 33 ZA0778
Size (mm) Pack Qty Product Code
Plain Connector
16 70 XV0002
20 50 XV0003
25 30 XV0004
31 70 ZA0776
32 70 ZA0776
40 60 ZA0777
50 33 ZA0778
63 15 XV0009
With Lubricating Nozzle
37 40 US0000
HDPE Low Friction Ducting
Push Fit /Compression Connectors
Compression Connectors
Threaded Connectors
Please contact us for other size requirements
Watertight and airtight push fit and compression mechanism
Watertight and airtight screw on fitting
For joining two lengths of duct without greatly increasing the overall diameter
�
Telecoms Ducting Systems
Size (mm) Pack Qty Product Code
17-24 1 ZA0799
23-30 1 ZA0802
29-36 1 ZA0803
35-44 1 ZA0804
45-58 1 ZA0805
HDPE Low Friction Ducting
Pulling Eyes
Connector Swivels Size (mm) Length (mm) Pack Qty Product Code
Non-fused Swivel
22 85.7 1 ZA2850
32 178 1 ZA2851
Fused Swivel
16 82 1 ZA0763
22 102 1 ZA2855
Shear Pins - for use with fused swivel
0.9kN for 16mm swivel 10 ZA2856
1.5kN for 16mm swivel 10 ZA0761
1.7kN for 16mm swivel 10 ZA2857
2.67kN for 16mm swivel 10 ZA0762
2kN for 22mm swivel 10 ZA2858
3kN for 22mm swivel 10 ZA2859
4kN for 22mm swivel 10 ZA2860
6kN for 22mm swivel 10 ZA2861
8kN for 22mm swivel 10 ZA2862
Duct Clip Size (mm) Pack Qty Product Code
2 x 40mm 500 ZA0772Fixed to walls with screws (not included)
Tapered, threaded sub-duct pulling eye with clevis end
For pulling fibre optic cable
Telecoms Ducting Systems
�
Description Colour Length (m) kN Product Code
Low Friction Cord Orange 3300 8 ZA0026
Low Friction Cord Orange 500 11 ZA0027
Size (mm) Pack Qty Product Code
8 1 ZA2863
10 1 ZA2864
Description Pack Qty Product Code
2-way 1 ZA0077
3-way 1 ZA0032
4-way 1 ZA0033
HDPE Low Friction Ducting
Low Friction Draw Cord
Links
Pulling HarnessFor pulling cable or sub-duct together
Standard screw type rope links
�
Telecoms Ducting Systems
Size (mm) Pack Qty Product Code
42 1 ZA0768
63 1 ZA2870
Size (mm) Pack Qty Product Code
25 1 ZA0767
32 1 ZA0768
37 1 ZA0771
40 1 ZA0770
Size (mm) Pack Qty Product Code
32 1 US0011
37 1 US0012
40 1 US0013
50 1 US0014
Size (mm) Pack Qty Product Code
16 500 ZA0794
20 500 ZA0795
25 500 ZA2875
31 500 ZA0796
32 500 ZA2876
34 500 ZA0797
37 500 ZA2877
40 500 ZA0798
50 500 ZA2878
Duct Cutters
Pre-cabled Duct Cutters
HDPE Low Friction Ducting
Chamfer Tools
Flexible End Caps
For cutting duct in a controlled fashion without damaging cables
Provides a chamfered edge on both inside and outside of duct
Universal seal for preventing ingress of silt and waterOuter fit
Telecommunications Ducting SystemsTelecoms Ducting Systems
10
HDPE Twin Wall Ducting Manufactured in accordance with BS EN50086-2- 4
OD/ID (mm) Length (m) Pack Qty (Lengths) Product Code
450N Compression Type
63/50 6 108 CX0369
105/89 6 120 CX0439
110/94 6 110 CX0509
750N Compression Type
63/50 6 108 CX0371
105/89 6 120 CX0441
110/94 6 110 CX0511
Lengths — Green
Lengths — Light Grey OD/ID (mm) Length (m) Pack Qty (Lengths) Product Code
450N Compression Type
63/50 6 108 CR0369
105/89 6 120 CR0439
110/94 6 110 CR0509
750N Compression Type
63/50 6 108 CR0371
105/89 6 120 CR0441
110/94 6 110 CR0511
Lengths — White OD/ID (mm) Length (m) Pack Qty (Lengths) Product Code
450N Compression Type
63/50 6 108 DQ0369
105/89 6 120 DQ0439
110/94 6 110 DQ0509
750N Compression Type
63/50 6 108 DQ0371
105/89 6 120 DQ0441
110/94 6 110 DQ0511
Includes one coupler per length Sealing rings sold separately
Includes one coupler per length Sealing rings sold separately
Includes one coupler per length Sealing rings sold separately
Note: Twin Wall is also available to Eircom 850N specification
KM 62102
KM 62102
KM 62102
11
Telecoms Ducting Systems
Telecoms Ducting Systems
1�
OD/ID (mm) Bend (mm) Radius Pack Qty Product CodeGreen
Product CodeLight Grey
450N Compression Type
63/50 11¼° 150 50 EP0959 EP1478
63/50 22½° 150 50 EP0960 EP1479
63/50 45° 150 50 EP0961 EP1480
63/50 90° 150 50 EP0962 EP1481
105/89 11¼° 200 15 EP0967 EP1486
105/89 22½° 200 15 EP0968 EP1487
105/89 45° 200 15 EP0969 EP1488
105/89 90° 200 10 EP0970 EP1489
110/94 11¼° 200 15 EP0975 EP1494
110/94 22½° 200 15 EP0976 EP1495
110/94 45° 200 15 EP0977 EP1496
110/94 90° 200 10 EP0978 EP1497
750N Compression Type
63/50 11¼° 150 50 EP0963 EP1482
63/50 22½° 150 50 EP0964 EP1483
63/50 45° 150 50 EP0965 EP1484
63/50 90° 150 50 EP0966 EP1485
105/89 11¼° 200 15 EP0971 EP1490
105/89 22½° 200 15 EP0972 EP1492
105/89 45° 200 15 EP0973 EP1493
105/89 90° 200 10 EP0974 EP1494
110/94 11¼° 200 15 EP0979 EP1498
110/94 22½° 200 15 EP1080 EP1499
110/94 45° 200 15 EP1081 EP1500
110/94 90° 200 10 EP1082 EP1501
HDPE Twin Wall Ducting Manufactured in accordance with BS EN50086-2-4
Bends Includes one coupler per lengthSealing rings sold separately
Coupler OD (mm) Pack Qty Product Code Black
Product CodeGreen
Product CodeLight Grey
63 200 EP0107 EP1057 EP1576
105 50 EP0111 EP1061 EP1580
110 50 EP0113 EP1063 EP1582
Secure push fit supplied with each length Sealing rings not included
Sealing RingsFor sealed systems, two sealing rings required per length
OD (mm) Pack Qty Product Code
63 50 ZA0137
105 50 ZA0138
110 50 ZA0139
1�
Telecoms Ducting Systems
HDPE Twin Wall Ducting Manufactured in accordance with BS EN50086-2-4
Hockey Stick
Equal Y
Reducer
OD (mm) Pack Qty Product Code Green
Product Code Light Grey
63 20 EP1309 EP1828
OD (mm) Pack Qty Product Code Green
Product Code Light Grey
63 20 EP1367 EP1886
105 10 EP0433 EP1902
110 10 EP0441 EP1910
OD (mm) Pack Qty Product Code Green
Product Code Light Grey
63/50 50 EP1102 EP1621
110/96 50 EP1136 EP1646
110/100 50 EP1139 EP1658
Swept Tee OD (mm) Pack Qty Product Code Green
Product Code Light Grey
105/105/63 18 EP1224 EP1743
110/110/63 18 EP1236 EP1755This item is available in other colours subject to minimum order quantity and lead time
This item is available in other colours subject to minimum order quantity and lead time
This item is available in other colours subject to minimum order quantity and lead time
This item is available in other colours subject to minimum order quantity and lead time
Telecoms Ducting Systems
1�
Nom. OD (mm)
Nom. ID (mm)
Nom. Wall Thick (mm)
Length (m) Pack Qty (Lengths)
Product Code
450N Compression Type
54 50 2.1 6 390 UK1101
88.9 83 2.95 6 127 UK1360
96.5 90 3.1 6 105 UK1102
110 103 3.37 6 86 UK1363
125 118 3.7 6 68 UK1366
160 151 4.35 6 39 UK1369
750N Compression Type
54 49 2.5 6 390 UK1373
88.9 82 3.5 6 127 UK1376
96.5 89 3.7 6 105 UK1379
110 102 4.0 6 86 UK1382
125 116 4.35 6 68 UK1385
160 150 5.13 6 39 UK1388
Nom. OD (mm)
Nom. ID (mm)
Nom. Wall Thick (mm)
Length (m) Pack Qty (Lengths)
Product Code
450N Compression Type
54 50 2.1 6 390 UK1392
88.9 83 2.95 6 127 UK1395
96.5 90 3.1 6 105 UK1109
110 103 3.37 6 86 UK1398
125 118 3.7 6 68 UK1401
160 151 4.35 6 39 UK1404
750N Compression Type
54 49 2.5 6 390 UK1408
88.9 82 3.5 6 127 UK1411
96.5 89 3.7 6 105 UK1414
110 102 4.0 6 86 UK1417
125 116 4.35 6 68 UK1420
160 150 5.13 6 39 UK1423
Lengths — Green
uPVC Ducting Manufactured in accordance with BS EN50086-2-4
Lengths — Light Grey
250N pipe also available on request. Other colours available on request
SocketedPrinted to customer’s requirements
250N pipe also available on request. Other colours available on request
Socketed Printed to customer’s requirements
1�
Telecoms Ducting Systems
Bends
uPVC Ducting Manufactured in accordance with BS EN50086-2-4
Socketed
For Pipe OD (mm)
Bend Pack Qty Product CodeGreen
Product CodeLight Grey
54 45° 10 UN0032 UM0032
54 90° 10 UN0033 UM0033
89 11¼° 5 UN0034 UM0034
89 22½° 5 UN0035 UM0035
89 45° 5 UN0036 UM0036
89 90° 5 UN0037 UM0037
96.5 11¼° 5 UN0038 UM0038
96.5 22½° 5 UN0039 UM0039
96.5 45° 5 UN0040 UM0040
96.5 90° 5 UN0041 UM0041
110 11¼° 5 UN0042 UM0042
110 22½° 5 UN0043 UM0043
110 45° 5 UN0044 UM0044
110 90° 5 UN0045 UM0045
125 11¼° 5 UN0046 UM0046
125 22½° 5 UN0047 UM0047
125 45° 5 UN0048 UM0048
125 90° 5 UN0049 UM0049
160 11¼° 1 UN0050 UM0050
160 22½° 1 UN0051 UM0051
160 45° 1 UN0052 UM0052
160 90° 1 UN0053 UM0053
Couplers OD (mm) Pack Qty Product CodeGreen
Product CodeLight Grey
54 50 UN0011 UM0011
89 50 UN0012 UM0012
96.5 50 UN0013 UM0013
110 50 UN0014 UM0014
125 40 UN0015 UM0015
160 20 UN0016 UM0016This item is available in other colours subject to minimum order quantity and lead time
This item is available in other colours subject to minimum order quantity and lead time
Telecoms Ducting Systems
1�
uPVC Ducting Manufactured in accordance with BS EN50086-2-4
Equal Y
Reducer
OD (mm) Pack Qty Product CodeGreen
Product CodeLight Grey
96.5 1 UN0020 UM0020
110 1 UN0022 UM0022
OD (mm) Pack Qty Product CodeGreen
Product CodeLight Grey
89/54 50 UN0070 UM0070
96.5/54 50 UN0071 UM0071
96.5/89 50 UN0072 UM0072
100/96.5 50 UN0073 UM0073
110/96 50 UN0074 UM0074
114/96 40 UN0075 UM0075
125/110 40 UN0076 UM0076
Swept Tee OD (mm) Pack Qty Product CodeGreen
Product CodeLight Grey
96.5 x 54 20 UN0001 UM0001
110 x 54 18 UN0002 UM0002This item is available in other colours subject to minimum order quantity and lead time
This item is available in other colours subject to minimum order quantity and lead time
This item is available in other colours subject to minimum order quantity and lead time
Oversleeve OD (mm) Pack Qty Product CodeGreen
Product CodeLight Grey
54 50 UN0060 UM0060
89 40 UN0061 UM0061
96.5 40 UN0062 UM0062
110 35 UN0063 UM0063
125 25 UN0064 UM0064
160 20 UN0065 UM0065This item is available in other colours subject to minimum order quantity and lead time
1�
Telecoms Ducting Systems
General Fittings and Accessories
End Caps OD (mm) Pack Qty Product Code
63 50 ZA0111
105 50 ZA0014
110 50 ZA0115
120 50 ZA0117
145 50 ZA0119
178 50 ZA0122Yellow as standard, other colours available subject to minimum order quantities and lead time
Dust tight temporary sealOuter fit
Duct Brush Brush Dia. (mm) Duct ID.(mm) Pack Qty Product Code
86 105 1 ZA0001
95 110 1 ZA0002
Duct Mandrel Mandrel Dia. (mm) Duct ID.(mm) Pack Qty Product Code
79 105 1 ZA0003
84 110 1 ZA0004
Draw Cord Description Colour Length (m) kN Product Code
Polypropylene Cord Blue 500 5 ZA0025
Low Friction Cord Orange 3300 8 ZA0026
Low Friction Cord Orange 500 11 ZA0027
Cylindrical bristle brush for cleaning duct bores
Steel mandrel with swivelling eyes for proving duct runs
Telecoms Ducting Systems
1�
Duct OD. (mm) Type Pack Qty Product Code
40 2-way 50 ZA0036
40 4-way 50 ZA0037
40 6-way 50 ZA0038
40 8-way 50 ZA0039
63 2-way 50 ZA0044
63 4-way 50 ZA0045
63 6-way 50 ZA0046
63 8-way 50 ZA0047
105 2-way 50 ZA0048
105 4-way 50 ZA0049
105 6-way 50 ZA0050
105 8-way 50 ZA0051
110 2-way 50 ZA0052
110 4-way 50 ZA0053
110 6-way 50 ZA0054
110 8-way 50 ZA0055
General Fittings and Accessories
Cable Duct Lubricant Size (Litres) Pack Qty Product Code
1 1 ZA0183
20 1 ZA0102
Duct Organisers
Other types are available subject to minimum order quantity and lead time
1�
Warning Tape Service Colour Dimensions Product Code
Fibre Optic Green 150mm x 100µ ZA0076365m rolls
Other types are available subject to minimum order quantity and lead time
For use in duct management
1�
Telecoms Ducting Systems
1�
Duct Sealing Systems
Access Chambers Systems
We offer a complete range of high quality duct sealing systems providing airtight and gastight protection in the duct network. Please refer to our “Duct Sealing Systems” brochure for full details.
Our range of preformed access chambers is ideally suited to telecom networks. QuadBox is a stackable segmental system approved by British Telecom for use in its national network. RadBox is a versatile and fully modular system with panels and corners which fit together to create almost any size of chamber. It is an ideal solution for large or unusually sized chambers. Please refer to our “Access Chamber Systems” brochure for full details.
General Fittings and Accessories
RadBox®
QuadBox®
Telecoms
Cable Protection SystemsDucting Systems
2010
CPS/TELDS 11/10
Stockist Stamp
2011
Pioneers in PE Pipe Technologies
S y s t e m s
Head Office & International Sales
Radius Systems LtdRadius House, Berristow LaneSouth Normanton, Alfreton, DerbyshireDE55 2JJ, UKt: +44 (0)1773 582329e: [email protected]
N. Ireland and Rep. of Ireland Sales
Radius Plastics LtdScarva Road Industrial EstateBanbridge, Co. DownBT32 3QD, UKt: +44 (0)28 4066 9999e: [email protected]
Middle East Sales
RadiusSenaat (Piping and Fittings) LLCICADBusiness Hub B206MussafahAbu Dhabi, UAEt: +971 2 5503277e: [email protected]
The content of this publication is for information only. Such information is given in gooth faith and Radius Systems accepts no liability for its content.
www.radius-systems.com