HINGESC11.14
C11
SIDE HUNG WINDOWS
01.10.2020
Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
C11.14.02 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
CONTENTS
1. General .................................................................................C11.14.03
2. Size range ............................................................................ C11.14.04
3. Chrono visible hinges ..........................................................C11.14.053.1. Standard hinges n° 26140-750 and 26140-760 C11.14.053.2. Adjustable hinges C11.14.063.3. 2-part and 3-part hinges C11.14.073.4. Reinforced hinges n° 26164-750 and 26164-760 C11.14.08
4. Chrono Invision Pro hinges .................................................C11.14.164.1. Hinge sets C11.14.164.2. Installation tools C11.14.174.3. Installation of hinges C11.14.184.4. Adjustments of hinges C11.14.19
5. Chrono Invision Go hinges ..................................................C11.14.215.1. Hinge sets C11.14.215.2. Installation of hinges C11.14.225.3. Adjustments of hinges C11.14.24
6. Hinge wedges ...................................................................... C11.14.256.1. Hinge wedge n° 26110-752 C11.14.256.2. Hinge wedge n° 26130-752 C11.14.25
CHRONO SIDE HUNG WINDOWS C11.14.03
HINGES
C11.14
1. General• The totally clampable Chrono turn system is available with visible hinges and with concealed hinges.
• The concealed hinges offer the following advantages: - The concealed hinges have the advantage that the hinges are invisible when the window is closed. - The possibility to use a narrow frame profile: aesthetic aspect and glass surface will be larger. - The cleaning of the window frames will be easier because all the corners are easily accessible. - Colour-independent, so reducing stock and increasing cost effectiveness. - No need to remove the inner gasket to mount the hinges. A better acoustic, wind and water tightness is obtained.
- The fully concealed hinges can not be damaged or spoilt during transport, installation or other work to the building.
• The concealed hinges are available in two different versions: - Chrono Invision Pro: fully concealed clampable hinges, which can carry vent weights up to 170 kg. - Chrono Invision Go: fully concealed clampable hinges, which can carry vent weights up to 90 kg.
• All parts are made of non-corroding materials.
Profile dimensions• Chrono hardware is available to suit a frame groove of 14/18 mm or a frame groove of 10/14 mm.
Cut out vent profile
Chrono Invision Pro
Frame groove14/18 mm
Frame groove10/14 mm
A 14 ± 0.5 10 ± 0.5
B 18 ± 0.5 14 ± 0.5
Chrono Invision Go
C11.14.04 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
2. Size rangeChrono
• Size range with connection piece set: - Vent width: 400-1400 mm (non-adjustable hinges).
- Vent width: 400-1700 mm (adjustable hinges).
- Vent height: 600-2400 mm.• Size range for vent heights > 2400 mm:
- Vent width: 400-1200 mm (1125 mm for RC2). - Vent height: 2401-2800 mm.
• Vent weight: max. 90 kg (non-adjustable hinges).• Vent weight: max. 130 kg (adjustable hinges).• Ratio of vent width Fb / vent height Fh = max. 1.5.
Chrono Invision Pro (Standard and Plus)• Size range with connection piece set:
- Vent width: 400-1700 mm (< 90 kg). - Vent width: 545-1700 mm (> 90 kg). - Vent height: 600-2400 mm.
• Size range for vent heights > 2400 mm: - Vent width: 400-1200 mm (< 90 kg). - Vent width: 545-1200 mm (> 90 kg). - Vent height: 2401-2800 mm.
• Vent weight: max. 170 kg.• Ratio of vent width Fb / vent height Fh = max. 1.5 (< 130 kg).
Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg).
Chrono Invision Pro (Safe RC2 and Safe SKG**)• Size range with connection piece set:
- Vent width: 400-1700 mm (< 90 kg). - Vent width: 670-1700 mm (> 90 kg). - Vent height: 600-2400 mm.
• Size range for vent heights > 2400 mm: - Vent width: 400-1200 mm (1125 mm for RC2) (< 90 kg). - Vent width: 670-1200 mm (1125 mm for RC2) (> 90 kg). - Vent height: 2401-2800 mm.
• Vent weight: max. 170 kg.• Ratio of vent width Fb / vent height Fh = max. 1.5 (< 130 kg).
Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg).
Chrono Invision Go• Size range with connection piece set
- Vent width: 400-1300 mm. - Vent height: 600-2400 mm.
• Size range for vent heights > 2400 mm: - Vent width: 400-1200 mm (1125 mm for RC2). - Vent height: 2401-2800 mm.
• Vent weight: max. 90 kg.• Ratio of vent width Fb / vent height Fh = max. 1.2.
Remarks• Dimensions out of standard range on request!
• Size range with lockcase: - Vent width: 400-1400 mm (non-adjustable hinges).
- Vent width: 400-1700 mm (adjustable hinges).
- Vent height: 685-2400 mm.
• Size range with lockcase: - Vent width: 400-1700 mm (< 90 kg). - Vent width: 545-1700 mm (> 90 kg). - Vent height: 685-2400 mm.
• Size range with lockcase: - Vent width: 400-1700 mm (< 90 kg). - Vent width: 670-1700 mm (> 90 kg). - Vent height: 685-2400 mm.
• Size range with lockcase: - Vent width: 400-1300 mm. - Vent height: 685-2400 mm.
CHRONO SIDE HUNG WINDOWS C11.14.05
HINGES
C11.14
3. Chrono visible hinges3.1. Standard hinges n° 26140-750 and 26140-760
General• Vent width Fb = 400-1400 mm.• Vent weight < 90 kg.• Finish: aluminium anodised or polyester powder coated
(more than 450 RAL colours).
Preparations
Top hinge n° 26140-7501 4200-150.3 hinge pin1 26000-750-4 clamping plate vent part1 26140-760-1 frame part2 30140-760-3 cap1 35000-760-1 vent part2 35000-760-3 screw vent part
Bottom hinge n° 26140-7601 4200-150.3 hinge pin1 26000-760-4 clamping plate vent part1 26140-760-1 frame part2 30140-760-3 cap1 35000-760-1 vent part2 35000-760-3 screw vent part
C11.14.06 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
3.2. Adjustable hingesGeneral
• Vent width Fb = 400-1700 mm.• Vent weight < 130 kg.• Finish: aluminium anodised or polyester powder
coated (more than 450 RAL colours).• Lubricate the hinge wedges to reduce wear.• Adjustment hinge wedges:
see page C11.14.25.
>90kgand/or
Fb>1400mm
Plate n° 30000-760-5 for supporting adjusting screw (order separately)
ORFrame groove14-18 mm
Frame groove10-14 mm
Top hinge n° 26140-7511 20000-751-1 vent part1 20000-751-3 clamping plate vent part2 M5x10TFL DIN965 screw vent part1 30140-750-2 hinge pin1 35140-750-1 frame part
Bottom hinge n° 35140-7601 30000-760-2 hinge pin1 30140-760-2 adjustment bearing piece1 30140-760-3 cap1 35000-760-1 vent part2 35000-760-3 screw vent part1 35000-760-4 clamping plate vent part1 35140-760-1 frame part
Reinforcement set n° 35140-790(>90 kg and/or Fb>1400 mm)
1 35140-790-1 reinforcement piece2 30140-790-2 screw
Hinge wedge n° 26110-752 (groove 14-18)or
Hinge wedge n° 26130-752 (groove 10-14)
CHRONO SIDE HUNG WINDOWS C11.14.07
HINGES
C11.14
Preparation
Preparation hinges
Preparation reinforcement set
• For windows with vent weight between 90 kg and 130 kg and when Fb > 1400 mm the reinforcement set n° 35140-790 must be used to reinforce the adjustable top hinge.
• The M4x10 thread forming screws must fix into at least 6 mm of aluminium.
• Drilling jig n° 35000-955 is available for drilling the holes.
3.3. 2-part and 3-part hinges
4208-220 and 4208-221• Vent width Fb = 400-1000 mm.• Vent weight < 75 kg.
• Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours).
Order number 4208-220 4208-221 4208-320 4208-321G 4.5 5 4.5 5
Fh = max. 1200mm 2 hingesFh = 1200-1800mm 3 hingesFh = 1800-2400mm 4 hinges
4208-320 and 4208-321• Vent width Fb = 400-1200 mm.• Vent weight < 80 kg.
C11.14.08 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
3.4. Reinforced hinges n° 26164-750 and 26164-760
General
• Reinforced hinges for side hung windows for vent weights up to 300 kg.
• The number and the position of the hinges depends on the: - vent width - vent height - vent weight
• Size range depends on the maximum vent weight of 130 kg, 170 kg, 200 kg, 250 kg and 300 kg.
• The hinges are suitable for both frame groove 14/18 mm and frame groove of 10/14 mm.
• Important: the clearance between frame and vent must be at least 5 mm.
• Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours).
Top hinge n° 26164-7501 4200-152.3 hinge pin1 26000-750-4 clamping plate vent part1 26060-760-1 vent part1 26160-760-1 frame part2 30140-760-3 cap1 30140-790-2 screw M4x10 Din965 7500M2 35000-760-3 screw M5x8 Din9651 M4x4 Din916 screw
Bottom hinge n° 26164-7601 4200-152.3 hinge pin1 26000-760-4 clamping plate vent part1 26060-760-1 vent part1 26160-760-1 frame part2 30140-760-3 cap1 30140-790-2 screw M4x10 Din965 7500M2 35000-760-3 screw M5x8 Din9651 M4x4 Din916 screw
Frame groove14/18 mm
Frame groove10/14 mm
A 14 ± 0.5 10 ± 0.5
B 18 ± 0.5 14 ± 0.5
CHRONO SIDE HUNG WINDOWS C11.14.09
HINGES
C11.14
Vent weight up to 130 kg• Size range:
- Vent width Fb = 400-1400 mm - Vent height Fh = max. 2400 mm - Ratio of vent width Fb / vent height Fh = max. 1.5
• It is required to mount reinforcement piece n° 35000-901-2 on the top hinge of the middle hinge group.
• Number of hinges: A+B+C - A = 1x hinge n° 26164-750 at the top - B = number of hinges n° 26164-750 in the middle - C = 1x hinge n° 26164-760 at the bottom
• The hinges in the middle are equally divided between the top hinge and the bottom hinge.
• Option: window stay n° 35140-901, -902 or -903.
Fh Fb400-1400 mm
max. 1800 mm 1+1+1max. 2400 mm 1+2+1
1 or 2 hinges
Fb Window stay
400-600 mm 35140-901600-1300 mm 35140-902
1300-1400 mm 35140-903
C11.14.10 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
Vent weight up to 170 kg• Size range:
- Vent width Fb = 400-1600 mm - Vent height Fh = max. 2400 mm - Ratio of vent width Fb / vent height Fh = max. 1.5
• It is required to mount reinforcement piece n° 35000-901-2 on the top hinge of the bottom hinge group.
• Number of hinges: A+B+C - A = 2x hinge n° 26164-750 at the top - B = number of hinges n° 26164-750 in the middle - C = number of hinges at the bottom:
- 1x hinge n° 26164-750 - 1x bottom hinge n° 26164-760
• The hinges in the middle are equally divided between the top hinge group and the bottom hinge group.
• Option: window stay n° 35140-901, -902 or -903.
Fh Fb400-1600 mm
max. 1200 mm 2+0+2max. 1800 mm 2+1+2max. 2400 mm 2+2+2
1 or 2 hinges
Fb Window stay
400-600 mm 35140-901600-1300 mm 35140-902
1300-1400 mm 35140-903
CHRONO SIDE HUNG WINDOWS C11.14.11
HINGES
C11.14
Vent weight up to 200 kg• Size range:
- Vent width Fb = 400-1200 mm - Vent height Fh = max. 3200 mm - Ratio of vent width Fb / vent height Fh = max. 1.5
• It is required to mount reinforcement piece n° 35000-901-2 on the top hinge of the bottom hinge group.
• Number of hinges: A+B+C - A = 2x or 3x hinge n° 26164-750 at the top - B = number of hinges n° 26164-750 in the middle - C = number of hinges at the bottom:
- 1x or 2x hinge n° 26164-750 - 1x bottom hinge n° 26164-760
• The hinges in the middle are equally divided between the top hinge group and the bottom hinge group.
• Option: window stay with buffer n° 684-12 or 685-12 (detachable).
2, 3 or 4 hinges
2 or 3 hinges
2 or 3 hinges
Fh Fb max. 700 mm
max. 800 mm
max. 900 mm
max. 1000 mm
max. 1100 mm
max. 1200 mm
max. 2000 mm 2+2+2 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3max. 2100 mm 2+2+2 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3max. 2200 mm 2+2+2 2+2+2 3+2+3 3+2+3 3+2+3 3+2+3max. 2300 mm 2+2+2 2+2+2 3+2+3 3+2+3 3+2+3 3+2+3max. 2400 mm 2+2+2 2+2+2 3+2+3 3+2+3 3+2+3 3+2+3max. 2500 mm 2+3+2 2+3+2 2+3+2 3+3+3 3+3+3 3+3+3max. 2600 mm 2+3+2 2+3+2 2+3+2 3+3+3 3+3+3 3+3+3max. 2700 mm 2+3+2 2+3+2 2+3+2 2+3+2 3+3+3 3+3+3max. 2800 mm 2+3+2 2+3+2 2+3+2 2+3+2 3+3+3 3+3+3max. 2900 mm 2+3+2 2+3+2 2+3+2 2+3+2 3+3+3 3+3+3max. 3000 mm 2+3+2 2+3+2 2+3+2 2+3+2 2+3+2 3+3+3max. 3100 mm 2+4+2 2+4+2 2+4+2 2+4+2 2+4+2 3+4+3max. 3200 mm 2+4+2 2+4+2 2+4+2 2+4+2 2+4+2 3+4+3
C11.14.12 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
Vent weight up to 250 kg• Size range:
- Vent width Fb = 400-1200 mm - Vent height Fh = max. 3200 mm - Ratio of vent width Fb / vent height Fh = max. 1.5
• It is required to mount reinforcement piece n° 35000-901-2 on the top hinge of the bottom hinge group.
• Number of hinges: A+B+C - A = 2x or 3x hinge n° 26164-750 at the top - B = number of hinges n° 26164-750 in the middle - C = number of hinges at the bottom:
- 1x or 2x hinge n° 26164-750 - 1x bottom hinge n° 26164-760
• The hinges in the middle are equally divided between the top hinge group and the bottom hinge group.
• Option: window stay with buffer n° 684-12 or 685-12 (detachable).
2, 3 or 4 hinges
2 or 3 hinges
2 or 3 hinges
Fh Fb max. 700 mm
max. 800 mm
max. 900 mm
max. 1000 mm
max. 1100 mm
max. 1200 mm
max. 2000 mm 3+2+3 3+2+3 3+2+3 3+2+3max. 2100 mm 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3max. 2200 mm 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3max. 2300 mm 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3max. 2400 mm 2+2+2 3+2+3 3+2+3 3+2+3 3+2+3 3+2+3max. 2500 mm 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 2600 mm 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 2700 mm 2+3+2 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3max. 2800 mm 2+3+2 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3max. 2900 mm 2+3+2 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3max. 3000 mm 2+3+2 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3max. 3100 mm 2+4+2 2+4+2 2+4+2 3+4+3 3+4+3 3+4+3max. 3200 mm 2+4+2 2+4+2 2+4+2 3+4+3 3+4+3 3+4+3
CHRONO SIDE HUNG WINDOWS C11.14.13
HINGES
C11.14
Vent weight up to 300 kg• Size range:
- Vent width Fb = 400-1200 mm - Vent height Fh = max. 3200 mm - Ratio of vent width Fb / vent height Fh = max. 1.5
• It is required to mount reinforcement piece n° 35000-901-2 on the top hinge of the bottom hinge group.
• Number of hinges: A+B+C - A = 2x or 3x hinge n° 26164-750 at the top - B = number of hinges n° 26164-750 in the middle - C = number of hinges at the bottom:
- 1x or 2x hinge n° 26164-750 - 1x bottom hinge n° 26164-760
• The hinges in the middle are equally divided between the top hinge group and the bottom hinge group.
• Option: window stay with buffer n° 684-12 or 685-12 (detachable).
2, 3 or 4 hinges
2 or 3 Hinges
2 or 3 hinges
Fh Fb max. 700 mm
max. 800 mm
max. 900 mm
max. 1000 mm
max. 1100 mm
max. 1200 mm
max. 2000 mm 3+2+3 3+2+3max. 2100 mm 3+2+3 3+2+3 3+2+3max. 2200 mm 3+2+3 3+2+3 3+2+3max. 2300 mm 3+2+3 3+2+3 3+2+3 3+2+3max. 2400 mm 3+2+3 3+2+3 3+2+3 3+2+3max. 2500 mm 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 2600 mm 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 2700 mm 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 2800 mm 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 2900 mm 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 3000 mm 2+3+2 3+3+3 3+3+3 3+3+3 3+3+3 3+3+3max. 3100 mm 2+4+2 3+4+3 3+4+3 3+4+3 3+4+3 3+4+3max. 3200 mm 2+4+2 3+4+3 3+4+3 3+4+3 3+4+3 3+4+3
C11.14.14 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
Position and profile preparations• The hinges at the top and at the bottom are mounted with a clearance of 15 mm.• The frame part of the uppermost and the lowest hinge is mounted against the horizontal frame groove (0 mm).
1, 2, 3 or 4 hinges
1, 2, or 3 hinges
1, 2, or 3 hinges
Drill
CHRONO SIDE HUNG WINDOWS C11.14.15
HINGES
C11.14
Assembly instructions
1Mount the frame parts without loosening the screws.Tighten the screws with 5 Nm.
Mount the reinforcementscrew M4x10 Din965 7500M
2 3Mount the vent parts and slide in reinforcement piece 35000-901-2.Do not tighten the screws of the vent parts yet.
4Mount the vent in the frame.Slide in the hinge pin. Slide the hinge pin of the middle hinge through another frame part.
5Tighten the screws of the vent parts with 5 Nm.Mount the covers.
Tighten the reinforcement piece
Mount screwM4x4 Din916 in the vent part
C11.14.16 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
4. Chrono Invision Pro hinges4.1. Hinge setsFrame groove 14/18 mm Frame groove 10/14 mm
• Vent weight = max. 170 kg.• For a vent weight > 130 kg and/or vent width > 1400 mm, the reinforcement set n° 32140-790 (for frame
groove 14/18 mm) or 32130-790 (for frame groove 10/14 mm) should be placed.• Maximum opening angle: 90° or 105°.• Hinge wedge n° 26110-752 or n° 26130-752 is mounted at the hinge side:
- Fh = 1201-1800 mm : 1 piece - Fh = 1801-2400 mm : 2 pieces - Fh = 2401-2800 mm : 3 pieces
• Lubricate the hinge wedges to reduce wear.• Adjustment hinge wedges: see page C11.14.25.
Right hand = illustratedLeft hand = opposite view
Fb>1400mmand/or
Fg>130kg
Fb>1400mmand/or
Fg>130kg
Hinge set n° 23114-10R(L)1 23114-770R(L) top hinge1 32114-780R(L) bottom hinge
Reinforcement set n° 32140-790(>130kg and/or Fb>1400mm)
1 32140-790-1 reinforcement piece1 St3.5x13Din7504P screw
Hinge wedge n° 26110-752
Fb>1400mmand/or
Fg>130kg
Fb>1400mmand/or
Fg>130kgRight hand = illustratedLeft hand = opposite view
Hinge set n° 23134-10R(L)1 23134-770R(L) top hinge1 32134-780R(L) bottom hinge
Reinforcement set n° 32130-790(>130kg and/or Fb>1400mm)
1 32140-790-1 reinforcement piece1 32130-790-1 stop
Hinge wedge n° 26130-752
CHRONO SIDE HUNG WINDOWS C11.14.17
HINGES
C11.14
4.2. Installation tools
Assembly aid n° 32100-951
• The assembly aid n° 32100-951 consist of 2 parts: - Assembly aid for the bottom hinge n° 32100-951-1 - Assembly aid for the link arm n° 32100-951-2
• The assembly aid parts are tools to simplify the horizontal installation of the vent in the frame. With these tools the assembly on a horizontal table can be carried out by a single person.
Assembly aid n° 32100-951-1• This part blocks the bottom hinge, so that it stays
open at about 80°.
Assembly aid n° 32100-951-2• This part is clipped on the frame profile near the link
arm. The triangle in synthetic material protects the frame against coating damage during assembly and helps to position the vent (in case of large windows).
Installation set n° 32100-952
Short spinner handle
• The short spinner handle in bimetal has an ergonomic handle in synthetic material. The bar is very strong and resistant to common chemicals.
• Finish: chrome.
• Performance: in accordance with ISO 3315, DIN 3122 and NF ISO 3315.
Hinge joint with hexagon• The hinge joint with allen key will remain in a fixed position in order to
reach difficult accessible positions.
• The use of the hinge joint can save a lot of time.
• This tool can’t be used for a frame groove of 10-14 mm.
C11.14.18 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
4.3. Installation of hinges
Fixing vent part of bottom hinge
Fixing frame part of the bottom hinge on the frame profile
Press right into corner
Assembly of vent and frame
Fb > 1400mmand/or
Fg > 130kg
Positioning and fixing top hinge on the vent
Positioning top hinge (vent) on frame profile
Fg > 130 kg and frame groove 14/18 mm
Vent weight > 130 kg
Frame groove 10/14 mm
Frame groove 14/18 mm
Fixing of the drilling screw(reinforcement set 170 kg)
Installation of the reinforce-ment plate
Fixing top hinge
Fixing of the stop(reinforcement set 170 kg)
Fg > 130 kg and frame groove 10/14 mm
Press right into corner
n° 4
Remove retaining piece
Remove positioning clips after assembly
n° 2.5 n° 2.5
n° 2.5
n° 2.5
n° 2.5
CHRONO SIDE HUNG WINDOWS C11.14.19
HINGES
C11.14
4.4. Adjustments of hinges
Overview adjustments
Bottom hinge - Continuous horizontal and vertical adjustment range of ±1.5 mm.
- Adjustable without releasing fixing screws and without removing the vent.
- Adjustable friction device for turn mode.
Top hinge - Continuous horizontal adjustment range of +3 mm/-3 mm.
Opening angle - The maximum opening angle is adjustable on the bottom hinge (90° or 105°).
Adjustment top hinge
Adjustment vent part of bottom hinge
right left
INSIDE INSIDE
C11.14.20 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
Adjustment frame part of the bottom hinge
Adjustment of the friction mechanism
Adjustment of the opening angle (90° to 105°) before mounting the hinge
CHRONO SIDE HUNG WINDOWS C11.14.21
HINGES
C11.14
5. Chrono Invision Go hinges5.1. Hinge setsHinge set Hinge setfor frame groove 14/18 mm for frame groove 10/14 mm
• Vent weight = max. 90 kg.• Maximum opening angle: 100°.• Attention! Never adjust the bottom hinge vertically before installation.• Hinge wedge n° 26110-752 or n° 26130-752 is mounted at the hinge side:
- Fh = 1201-1800 mm : 1 piece - Fh = 1801-2400 mm : 2 pieces - Fh = 2401-2800 mm : 3 pieces
• Lubricate the hinge wedges to reduce wear.• Adjustment hinge wedges: see page C11.14.25.
Right hand = illustratedLeft hand = opposite view
Hinge set n° 23117-10R(L)1 23117-770R(L) top hinge1 32107-780-1R(L) vent part bottom hinge1 32117-780-2R(L) frame part bottom hinge1 32107-780-4 guiding piece bottom hinge
Hinge wedge n° 26110-752
Right hand = illustratedLeft hand = opposite view
Hinge set n° 23137-10R(L)1 23137-770R(L) top hinge1 32107-780-1R(L) vent part bottom hinge1 32137-780-2R(L) frame part bottom hinge1 32107-780-4 guiding piece bottom hinge
Hinge wedge n° 26130-752
C11.14.22 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
5.2. Installation of hinges
Installation vent part of bottom hinge
INSIDE
Right handwindow
Left handwindow
Fixing vent part of bottom hinge
Hook in the arm in the guiding piece and fully open the hinge to click in.
Installation and fixing of the top hinge on the vent
Slide in the hinge with the positioning pin up against the vent groove.
PUSH !
CHRONO SIDE HUNG WINDOWS C11.14.23
HINGES
C11.14
Hook in frame part of the bottom hinge on the vertical frame profile
Slide downwards the frame part of the bottom hinge
Assembly of vent and frame
Installation top hinge (vent) on frame profile
Open frame part at 90° and hook in vertically behind the groove tooth (13a). Then insert in the top frame profile (13b).
Positionclamping nut !
Fix the frame part of the bottom hinge on the frame profile
PUSH
!
PUSH !
Positionclamping nut !
PUSH !
Fixing frame part of the link arm
Positionclamping nut !
PUSH !
OR
Horizontal installation of the vent Vertical installation of the vent
!!
C11.14.24 CHRONO SIDE HUNG WINDOWS
HINGES
C11.14
5.3. Adjustments of hinges
Overview adjustments
Bottom hinge - Attention! Never adjust the bottom hinge vertically before installation.
- Continuous horizontal and vertical adjustment range of ±1.5 mm.
- Adjustable without releasing fixing screws and without removing the vent.
Top hinge - Continuous horizontal adjustment range of +3 mm/-3 mm.
Adjustment top hinge
Height adjustment vent part of the bottom hinge
Horizontal adjustment frame part of the bottom hinge
CHRONO SIDE HUNG WINDOWS C11.14.25
HINGES
C11.14
6. Hinge wedges6.1. Hinge wedge n° 26110-752
• For frame groove 14-18 mm.• Lubricate the hinge wedges to reduce wear.
Standard inside gap (21 mm)
Smaller inside gap
6.2. Hinge wedge n° 26130-752• For frame groove 10-14 mm.• Lubricate the hinge wedges to reduce wear.
Normal rebate More gasket pressure
Normal rebate More gasket pressure
Normal rebate
More gasket pressure
Mount the vent part at the narrowest part
Mount the vent part at the widest part