October 2016Ralph E. DuncanVP Business DevelopmentBMT Designers & Planners
A Network of Resources to Build the Future of American Offshore Wind
A network of knowledge and resource
Superiority through partnership
Asia Pacific
Europe
Americas
BMT Designers & PlannersBMT Fleet Technology
BMT Defence ServicesBMT Hi-Q SigmaBMT IsisBMT Reliability Consultants
BMT Nigel GeeBMT SurveysBMT SMARTVerweij & Hoebee
BMT ARGOSSBMT CordahBMT Fluid Mechanics
BMT Asia Pacific (Hong Kong)BMT Asia Pacific (Indonesia)BMT Asia Pacific (Malaysia)BMT Asia Pacific (Singapore)BMT JFA Consultants
BMT Consultants IndiaBMT OceanicaBMT WBM
BMT Design & Technology
Defence Energy and Environment Transport
BMT Designers & PlannersBMT Fleet TechnologyBMT Scientific Marine Services
• Over 60 years of providing technical services to commercial and government maritime clients.
• Naval Architecture, Marine Engineering and Ship Design
• Structural Analysis • Shipyard Support • Stability Analysis• Shipboard Electrical Engineering
Technical and Engineering Support
• ADVANCE STRATEGIC PLANNING SUPPORT
• Cost, Risk Assessment, and Programmatic Studies
• Business Case Analyses• PROJECT IMPLEMENTATION• Construction Planning & Management /
Owner’s Representative• Testing and Trials Support• IN-SERVICE ENGINEERING AND
SUPPORT• Maintenance Management Program
Development and Support (Reliability-Centered)
• Shipboard Corrosion Assessment • Marine Maintenance Training
Maritime Assets Program Management and Life Cycle Support
More than 35 Windfarm Vessels delivered worldwide.
BMT Nigel Gee delivers a one stop solution to the customer with a close knit team of highly qualified and experienced naval architects, designers, engineers and project managers with an in depth knowledge across all relevant vessel design disciplines.
BMT Designers & Planners and Technolog Services have partnered to deliver proven Heavy Lift Jack-Up Offshore Installation Vessel designs to service the emerging U.S. offshore wind industry. Technolog’s global expertise and proven experience delivering such vessels, combined with BMT’s U.S.-based knowledge and capability in engineering, design, regulatory compliance, and shipyard support provides confidence in our team’s ability to deliver a vessel specifically tailored for the U.S. market.
Next Generation Installation Unit Offshore Wind installation Barges
Worldwide Offshore Unit Design Experience
Largest Offshore Pipe LayerTechnolog Services is a German maritime consulting and engineering firm with experience providing design and construction support for jack-up vessels throughout the globe.
Copyright StatementCopyright © by BMT GroupAll rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of BMT Designers & Planners.
Where content has not been produced by BMT Designers & Planners, we have sought the appropriate authorization for its use and does not constitute an infringement of copyright.
Thank You