1
Konica Minolta bizhub 751/601Specification & Installation Guide
bizhub 751/601 Specifications Type Console
Document holder Stationary
Photoconductor OPC
Luminous source White inert gas fluorescent lamp
Copying system Laser electrostatic transfer method
Developing system Dry-type dual-component reverse magnetic brush developing
Fusing system Heat roller
Resolution Scanning: 600 dpi x 600 dpi Printing: 1,200 dpi x 600 dpi equivalent
Document Types: Sheets, books (spreads), three-dimensional objects Size: Maximum 11" x 17" (A3) Thickness: Maximum 1.25"; Weight: 15 lb. (three-dimensional objects)
Paper types Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), Custom paper 1/2/3, recycled paper, colored paper, special paper, fine paper, label sheets*, letterheads, tab paper, overhead projector transparencies*, trace paper* *Can only be fed through the bypass tray
Paper sizes Tray 1 & 2: 8.5" x 11", 5.5" x 8.5", A4, B5, A5 Tray 3 & 4: 11" x 17" R to 5.5" x 8.5", 8.5" x 14" R, F4*1, A3 R to A5 Width: 7.25" to 12.25"; Length: 5.75" to 18" Bypass tray: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R, F4*1, A3 R to A6 R Width: 4" to 12.25"; Length: 5.75" to 18"
Paper tray capacity Tray 1: Normal paper: 1,500 sheets (20 lb.) Tray 2: Normal paper: 1,000 sheets (20 lb.) Tray 3 & 4: (Universal tray): Normal paper: 500 sheets (20 lb.) Bypass tray (Universal tray): Normal paper: 100 sheets (20 lb.)
Warm-up time bizhub 751: Less than 5 min. bizhub 601: Less than 4 min. and 30 secs.
Image loss copy/print
Simplex: Leading edge/trailing edge: 3 mm or less Duplex: Leading edge/trailing edge: 4 mm or less (front side) 3 mm or less (back side)
First copy bizhub 751: 3.0 seconds or less bizhub 601: 3.5 seconds or less
Copy speed bizhub 751 8.5" x 11" 75 ppm 11" x 17" R 42 ppm 8.5" x 14" R 50 ppm 8.5" x 11" R 61 ppm 5.5" x 8.5" 75 ppm
bizhub 601 8.5" x 11" 60 ppm 11" x 17" R 34 ppm 8.5" x 14" R 40 ppm 8.5" x 11" R 49 ppm 5.5" x 8.5" 60 ppm
Magnification ratios x1.0 (full size): x1.000 ± 1.0% or less Enlarge: x1.214, x1.294, x1.545, x2.000 Reduce: x0.785, x0.772, x0.647, x0.500 Minimal: 0.930 Zoom: x0.250 to x4.000 (in 0.1% increments) Stored zoom ratios: 3
Multiple copies 1 to 9,999 sheets, 1 to 9,999 sets
Density adjustment Copy density: Automatic and manual adjustment (9 levels) Background density: Manual adjustment (9 levels)
Power requirements AC120V, 16A, 60Hz
Noise 75 dB or less (while operating)
Power consumption Maximum 1.92 kW or less (including options)
Dimensions 34.9" (W) x 33.8" (D) x 44.9" (H)
Space requirements*2 50.25" (W) x 31.25" (D)
Memory 1,024 MB RAM (192 MB file memory)
Weight Approx. 496 lb.
*1 There are four F4 (Foolscap) sizes: 8.25" x 13" R, 8.125" x 13".25" R, 8.5" x 13" R and 8" x 13" R. Any one of these sizes can be selected. For details, contact your technical representative.
*2 The indicated spaced requirements represent the space required to fully extend the bypass tray. In order to incorporate improvements, these product specifications are subject to change without notice.
Duty Cycle
Up to 300,000. Maximum monthly print volume supported under standard vendor supplied service. Defines the upper end of the expected customer volume for the device. Customers should consider multiple machines if average monthly volume approaches duty cycle on a continual basis.
03/2011
Konica Minolta bizhub 751/601Specification & Installation Guide
2
Space Requirements
bizhub 751/601 + SF-602 + LU-405
3.94 (100) 3.94 (100)
34.88 (886)19.29(490)
7.64(194)
7.87 (200)
Uni
t: in
ch (m
m)
18.
90 (4
80)
15.75(400)
37.40 (950) 33.92 (859)
79.09 (2009)69.69 (1770)
63.7
8 (1
620)
44.8
8 (1
140)
bizhub 751/601 + OT-505
3.94 (100) 3.94 (100)
50.20 (1275)
58.07 (1475)
18.9
0 (4
80)
Uni
t: in
ch (m
m)
200
335
7.87 (200)
37.40 (950)
79.09 (2009)
63.7
8 (1
620)
44.8
8 (1
140)
33.92 (859)
bizhub 751/601 + FS-610 + ZU-605 + LU-406 + PI-504
34.88 (886)31.50 (800)17.09(434)
3.94 (100) 7.87 (200)3.94 (100)6.65 (169)
Uni
t: in
ch (m
m)
680
990
63.7
8 (1
620)
44.8
8 (1
140)
18.
90 (4
80)
79.09 (2009)97.99 (2489)
33.92 (859)37.40 (950)
Konica Minolta bizhub 751/601Specification & Installation Guide
3
Environmental Requirements
Temperature 50° to 86° F
Humidity 10–80% RH
Noise while engine under operation < 75 dBA
Noise while feeder under operation 84 dBA
Ozone emission < 1.5 mg/h
Fusing range 293 to 347˚ F
Electrical Requirements
Line options: Dedicated NEMA Diagram for 5-20R
Voltage: 120V AC
Amperage: 16.0
Cycles: 60 Hz
NEMA Part No.: 5–20R
Cord Length: 7.5 ft.
Note: The main electrical outlet must be located within 7.5 feet from the right rear corner of the bizhub 751/601 main unit.
Konica Minolta bizhub 751/601Specification & Installation Guide
4
Component Considerations
DF-614 Automatic Document Feeder (Standard)
Document feed methods Normal paper: Single-sided and double-sided documents “Mixed Original” function: Combination of single-sided and double-sided documents Z-folded original: Single-sided document Tab paper: Single-sided document
Document types 13.25 to 53.25 lb.
Document sizes Single-sided/double-sided documents: 11" x 17" R to 5.5" x 8.5"/R and 8.5" x 14" R Mixed document sizes: Refer to Table 1.
Capacity of Maximum 100 sheets (21.25 lb.) document feeder
Power requirements Supplied from main unit
Dimensions 24.5" (W) x 22.75" (D) x 6" (H)
Weight Approx. 28.5 lb.
LU-405 Large Capacity Unit
Paper types Normal paper (16 to 24 lb.) Thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)
Paper sizes 8.5" x 11", A4, B5, Width: 7.25" to 8.75"; Length: 10" to 12.25"
Paper capacity 4,000 sheets (20 lb. paper)
Power requirements Supplied from main body
Dimensions 17" (W) x 25.25" (D) x 27.25" (H)
Weight 66 lb.
Table 1: Possible combinations for mixed document sizes
Max. Document Width
Document Size
11" x 17" (landscape)
8.5" x 11" (portrait)
8.5" x 14" (landscape)
8.5" x 11" (landscape)
5.5" x 8.5" (portrait)
5.5" x 8.5" (landscape)
11" x 17" (landscape)
• • — — — —
8.5" x 11" (portrait)
• • — — — —
8.5" x 14" (landscape)
• • • • • —
8.5" x 11" landscape
• • • • • —
5.5" x 8.5" (portrait)
• • • • • —
5.5" x 8.5" (landscape)
— — — — — •
Konica Minolta bizhub 751/601Specification & Installation Guide
5
Component Considerations
LU-406 Large Capacity Unit
Paper types Normal paper (16 to 24 lb.) Thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)
Paper sizes 11" x 17" R, 8.5" x 11"/R, 8.5" x 14" R, F4*1, A3 R to A4/R, Width: 7.25" to 18"; Length: 10" to 12.25"
Paper capacity 4,000 sheets (20 lb. paper)
Power requirements Supplied from main body
Dimensions 26.5" (W) x 25.25" (D) x 27.25" (H)
Weight 92.5 lb.
*1 There are four F4 (Foolscap) sizes: 8.25" x 13" R, 8.125" x 13".25 R, 8.5" x 13" R and 8" x 13" R. Any one of these sizes can be selected. For details, contact your technical representative.
FS-524 Finisher
Exit trays Main tray, sub tray
Settings Non-stapled, Offset, Staple
Paper types Main tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), label sheets, overhead projector transparencies, trace paper; Offset + Sort and Offset + Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) Staple: Normal paper (16 to 21.25 lb.) Sub tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)
Paper sizes Main tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4 Sub tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4
Paper capacity Main tray: 1,500 sheets of 8.5" x 14" or larger, 3,000 sheets of 8.5" x 11", or 500 sheets of 5.5" x 8.5" or smaller 100 sets (8.5" x 11": 9 stapled pages) Sub tray: 200 sheets
Amount of shift 1.25"
Staple settings Paper sizes (no. of bound pages): 11" x 17" R to 5.5" x 8.5" and 8.5" x 14" R (2 to 50 pages)
Power requirements Supplied from main body
Dimensions 16.75" (W) x 25.75" (D) x 39" (H)
Weight Approx. 132.25 lb.
Consumables Staple cartridge
Konica Minolta bizhub 751/601Specification & Installation Guide
6
Component Considerations continued
FS-525 Finisher
Exit trays Main tray, sub tray
Settings Non-stapled, Offset, Staple
Paper types Main tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), label sheets, overhead projector transparencies, trace paper; Offset + Sort and Offset + Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) Staple: Normal paper (16 to 21.25 lb.) Sub tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)
Paper sizes Main tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4 Sub tray: 11" x 17" R to 5.5" x 8.5" /R, 8.5" x 14" R and F4
Paper capacity Main tray: 1,500 sheets of 8.5" x 14" or larger, 3,000 sheets of 8.5" x 11", or 500 sheets of 5.5" x 8.5" or smaller 100 sets (8.5" x 11": 9 stapled pages) Sub tray: 200 sheets
Amount of shift 1.25"
Staple settings Paper sizes (no. of bound pages): 11" x 17" R: 2 to 50 pages; 8.5" x 14" R: 2 to 65 pages Other: 2 to 100 pages
Power requirements Supplied from main body
Dimensions 16.75" (W) x 25.75" (D) x 39" (H)
Weight Approx. 132.25 lb.
Consumables Staple cartridge
Konica Minolta bizhub 751/601Specification & Installation Guide
7
Component Considerations
FS-610 Finisher
Exit trays Main tray, sub tray, BM tray
Settings Non-stapled, Offset, Staple, Booklet, Tri-Fold
Paper types Main tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.), label sheets, overhead projector transparencies, trace paper; Offset + Sort and Offset + Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) Staple: Normal paper (16 to 21.25 lb.) Sub tray: Sort and Group settings: Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.) BM tray: Booklet (Fold & Staple) setting: Normal paper (16 to 21.25 lb.); Booklet (Half-Fold): Normal paper (16 to 21.25 lb.), thick paper (24.25 to 28 lb.); Tri-Fold setting: Normal paper (16 to 21.25 lb.), thick paper (24.25 to 28 lb.)
Paper sizes Main tray: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R and F4 Sub tray: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R and F4 BM tray: 11" x 17" R, 8.5" x 14" R and 8.5" x 11" R
Paper capacity Main tray: 1,500 sheets of 8.5" x 14" or larger, 2,500 sheets of 8.5" x 11" paper, 500 sheets of 5.5" x 8.5" or smaller, or 100 sets (8.5" x 11": 9 stapled pages) Sub tray: 200 sheets BM tray: 20 sets (11" x 17": 5 sheets with the “Fold & Staple” setting), 33 sets (11" x 17": 3 sheets with the “Half Fold” setting), or 50 sets (1 sheet with the “Tri-Fold” setting)
Amount of shift 1.25"
Staple settings Paper sizes (no. of bound pages): 11" x 17" R to 5.5" x 8.5" and 8.5" x 14" R (2 to 50 pages)
Power requirements Supplied from main unit
Dimensions 16.75" (W) x 25.75" (D) x 39" (H)
Weight Approx. 143.25 lb.
Consumables Staples cartridge
Punch Kit PK-505
Number of punched holes 2 holes or 3 holes
Paper types Normal paper (16 to 24 lb.), Thick paper (24.25 to 34 lb.)
Paper sizes 2 holes: 11" x 17" R to 5.5" x 8.5"/R, 8.5" x 14" R and F4 3 holes: 11" x 17" R and 8.5" x 11" R
Power requirements Supplied from finisher
Compatible finishers FS-524/FS-525/FS-610
Dimensions 5" (W) x 18.5" (D) x 4.5" (H)
Weight Approx. 6.5 lb.
Konica Minolta bizhub 751/601Specification & Installation Guide
8
Component Considerations continued
ZU-605 Z-Folding Unit
Number of punched holes 2 holes or 3 holes
Paper types Normal paper (16 to 24 lb.) with hole punching
Paper sizes 11" x 17" R to 5.5" x 8.5"/R and 8.5" x 14" R with hole punching
Fold types Z-fold
Paper types with Z-fold Normal paper (16 to 24 lb.)
Paper sizes with Z-fold 11" x 17" R, 8.5" x 14" R
Compatible finishers FS-524/FS-525/FS-610
Power requirements Supplied from an external outlet
Dimensions 6.75" (W) x 26" (D) x 36.5" (H)
Weight Approx. 83.75 lb.
PI-504 Post Inserter
Structure Double paper feed unit (upper and lower)
Cover sheet paper types Normal paper: (16 to 24 lb.) Thick paper: (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)
Cover sheet paper sizes Upper tray: 8.5" x 11" /R to 5.5" x 8.5"/R Lower tray: 12 x 18 R and 11" x 17" R to 5.5" x 8.5"/R, Wide paper: Maximum 12.25" x 18 in
Paper capacity 200 sheets for both upper and lower trays
Compatible finishers FS-524/FS-525/FS-610
Power requirements Supplied from finisher
Dimensions 20" (W) x 24.5" (D) x 8.75" (H)
Weight Approx. 23.25 lb.
SF-602 Shift Tray
Paper types Normal paper (16 to 24 lb.), thick paper (24.25 to 53.25 lb.), thin paper (13.25 to 15.75 lb.)
Paper sizes 11" x 17" R to 5.5" x 8.5"/R
Paper capacity 500 sheets of 8.5" x 14" or larger, 1,250 sheets of 8.5" x 11" paper, or 100 sheets of 5.5" x 8.5" or smaller
Amount of shift 1.25"
Power requirements Supplied from main body
Power requirements 15.75" (W) x 23.5" (D) x 19" (H)
Weight Approx. 33 lb.
Konica Minolta bizhub 751/601Specification & Installation Guide
9
Component Considerations
FK-502 Fax Kit (includes MK-716 Mount Kit)
Communication ECM/Super G3
Compatible Lines PSTN, PBSX/NCC, fax line (G3)
Line Density G3: R8 x 3.85, R8 x 7.7, R8 x 15.4, R16 x 15.4 (1/mm)
Modem Speed 2.4 kbps-33.6 kbps
Compression MH/MR/MMR/JBIG
Sending Paper Size Max. 11" x 17"
Recording Paper Size 11" x 17" to 5.5" x 8.5"
Transmission Speed Less than 3 sec. (V.34, JBIG)
Scan Speed 1 second (letter, fine mode)
Number of Abbr. 2,000
Number of Program Dial 400
Number of Group Dial 100 (500 destinations per group)
Sequential Multiple Max. 621 Station Transmission
FK-502 Fax Board
Function Supports two fax lines. One line can be set up to send and one line receive, or both can be set up to send.
IC-208 Image Controller
Type Internal Type
CPU Celeron-M 1 GHz/32-bit (Shared with the copier)
Memory 1,024 MB RAM (192 MB file memory)(Shared with the copier); 60 GB HDD (Shared with the copier)
Print Speed bizhub 751: 75 ppm bizhub 601: 60 ppm
Print Resolution 600 x 600 dpi/1,200 dpi (equivalent) x 600 dpi
PDL PCL5e/PCL6 (XL 3.0), PS3 Emulation (3016), XPS (XML paper specification)
Protocol TCP/IP (IPv4/IPv6), IPX/SPX, AppleTalk
Support OS Windows NT4.0 SP6, Windows 2000, Windows XP/x64, Windows Server 2003/Server x64, Windows Vista/Vista x64, Mac OS 9.2, OS X 10.2, 10.3, 10.4, 10.5*, Mac OS X (Intel-based) 10.4, 10.5*
Font PCL Resident Fonts: 80 outline PS3 Emulation Resident Fonts: 137 outline
* May not be available at the time of launch.
Konica Minolta bizhub 751/601Specification & Installation Guide
10
Component Considerations continued
EK-703 Local USB Interface Kit
Type USB 2.0 Interface (mini-B plug).
Function Required for local USB printing.
HD-510 Hard Disk
Type Internal HDD
Capacity 60 GB
Functions Added File Memory, Scan-to-User Boxes, Print User Boxes.
SC-506 Security Kit
Type Embedded
Function Encrypts data stored on the MFP's hard disk drive
AU-101 Biometric Authentication Unit
Compatible Finger Width 1.1" (Top); 1.2" (Bottom)
Interface USB 2.0 requires WT-504 Working Table
Dimensions (W x D x H) 3.1"(W) x 3.7"(D) x 2.2"(H)
Weight 0.311 lb (not including USB Cable)
AU-201H HID Card Authentication Unit (IC Card Type)
Dimensions (WxHxD) 3.625" x 2.5" x 0.625"
Weight 0.25 lb.
Power Supply Supplied from USB Port
System Conditions Ambient Temperature: 32°to 104° F (operating mode) Humidity: 20% to 85%
System Conditions Ambient Temperature: -4°to 122° F (non-operating mode) Humidity: 20% to 85%
Radio Law Division Self-Guided Read-Write Communication Facility
Applicable Card ISO 14443 Type A, FeliCa-based non-contact IC Card
Acquired Standard VCCI Class B
Compatible Computer CPU: PC/T Compatible, 1 GHz or more Memory: 128 MB or more HDD: 100 MB or more free space Monitor: 800 x 600 pixels, 16-bit color or more Network: TCP/IP Application: Microsoft Internet Explorer 6.0 (SP1) or later
Microsoft .NET Framework (SP1) or later
MFP Compatibility bizhub 652, 552, 751, 601, 501, 423, 363, 283, 223, C652DS, C652, C650, C552DS, C552, C550, C452, C451, C360, C353, C280, C253, C220, C203. Please check MyKonicaMinolta.com on a regular basis for compatibility updates.
NOTE: WT-504 Working Table is recommended for AU-201H HID Proximity Card Authentication Unit.
Konica Minolta bizhub 751/601Specification & Installation Guide
11
AU-204H Magnetic Stripe Card Reader
Dimensions (WxHxD) 1.28" x 1.23" x 3.94"
Weight 4.5 oz.
Power Supply Supplied from USB Port
System Conditions Ambient Temperature: 40˚ to 158˚ F (operating mode) Humidity: 10% to 90%
Transmit Frequency 3-60 i.p.s.
Certifications ISO 7810 and ISO 7811/AAMVA
Card Type Compatibility All magnetic stripe cards
MFP Compatibility bizhub 652, 552, 751, 601, 501, 423, 363, 283, 223, C652DS, C652, C650, C552DS, C552, C550, C452, C451, C360, C353, C280, C253, C220, C203. Please check MyKonicaMinolta.com on a regular basis for compatibility updates.
NOTE: WT-506 Working Table required for AU-204H Magnetic Stripe Card Reader.
AU-211P CAC/PIV Solution w/Certificate
Dimensions (WxHxD) 2.75" x 2.75" x 0.39"
Weight 0.13 Ibs.
Power Supply Supplied from USB Port
System Conditions 0˚ to 122˚ F (operating mode)
Interface Full Speed USB (12 Mbps)
Connector Shape USB A Type Connector
Compatible Card PKI-C-Card (PIV, CAC)
MFP Compatibility bizhub 652, 552, 751, 601, 501, 423, 363, 283, 223, C652DS, C652, C552DS, C552, C452, C360, C280, C220. Please check MyKonicaMinolta.com on a regular basis for compatibility updates.
NOTE: WT-506 Working Table required. Please contact your local Government Account Manager for additional information.
WT-504 Working Table
Type External Table
Function Holds AU-101 Biometric Authentication Unit, AU-201H HID Authentication Unit, AU-204H Magnetic Stripe Card Reader and AU-211P CAC/PIV Solution w/Certificate when used with standing base; Can be used as place holder for originals and/or output
Component Considerations
Konica Minolta bizhub 751/601Specification & Installation Guide
12
Copy Paper
Use paper that meets the following specifications:
Possible Custom-sized paper Sizes:
Paper Source Paper Width Paper Length
Bypass tray 3.938" to 12.313" 5.5" to 18"
Tray 3 and 4 7.188" to 12.375" 5.5" to 18"
LCU LU-405 10" to 12.25" 7.25" to 8.75"
LU-406 8.25" to 12.375" 7.688" to 18"
Double-sided copies 4.25" to 12.25" 5.75" to 18"
Possible Standard-sized Paper Sizes:
Paper Source Paper Size
Bypass tray 11" x 17" to 5.5" x 8.5"/R*1, 8.5" x 14"*1, F4*1, A3 to B6*1, A6
Tray 1 and 2 8.5" x 11" R, 5.5" x 8.5" R*1, A4 R, B5 R, A5 R*1
Tray 3 and 4 11" x 17" to 5.5" x 8.5" R*1, 8.5" x 11"*1/R, 8.5" x 14"*1, F4*1, A3 to A5 R*1
LCU LU-405 8.5" x 11" R, A4 R, B5 R
LU-406 11" x 17" to 8.5" x 11"*1/R, 8.5" x 14"*1, F4*1, A3 to A4/R
Double-sided copies 11" x 17" to 5.5" x 8.5" R*1, 8.5" x 14"*1, F4*1, A3 to A5 R*1
Finisher FS-524 Main tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Offset + Sort and Offset + Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Staple: 11" x 17" to 5.5" x 8.5" Punch: 11" x 17" to 5.5" x 8.5"/R and 8.5" x 14"*2 Sub tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4
Finisher FS-525 Main tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Offset + Sort and Offset + Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Staple: 11" x 17" to 5.5" x 8.5" Punch: 11" x 17" to 5.5" x 8.5"/R and 8.5" x 14"*2 Sub tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4
Finisher FS-610 Main tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Offset + Sort and Offset + Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 Staple: 11" x 17" to 5.5" x 8.5", 8.5" x 14" and F4 Punch: 11" x 17" to 5.5" x 8.5"/R and 8.5" x 14" Sub tray: Sort and Group settings: 11" x 17" to 5.5" x 8.5"/R, 8.5" x 14" and F4 BM tray: Booklet (Half Fold and Fold & Staple settings): 11" x 17", 8.5" x 14", 8.5" x 11" Tri-Fold: 8.5" x 11"
Shift tray SF-602 11" x 17" to 5.5" x 8.5" R and 8.5" x 14"
Exit tray (standard) 11" x 17" to 5.5" x 8.5", 8.5" x 14"*1, F4*1, A3 to B6, A6 R
*1 Any of the following paper sizes can be selected from the Administrator Settings screen: A4 R or 8.5" x 11", A5 or 5.5" x 8.5", 8.5" x 14" or F4 Select one size from the four F4 sizes available. For details, contact your technical representative.
*2 Available only when the optional punch kit PK-505 or Z-Folding unit ZU-605 is installed.
Paper Types and Paper Capacities
Paper Type
Paper Source
Normal Paper Overhead Projector Transparencies
Trace Paper
Bypass tray 100 sheets 1 sheet 1 sheet
Tray 1 1,500 sheets (20 lb. paper) — —
Tray 2 1,000 sheets (20 lb. paper) — —
Tray 3 and 4 500 sheets (20 lb. paper) — —
LCU LU-405 4,000 sheets (20 lb. paper) — —
LU-406 4,000 sheets (20 lb. paper) — —
Double-sided copies
• — —
List of Recommended PaperPlain Paper Hammermill Tidal MP
Recycled Paper Hammermill Bond (8.5" x 11") Domtar Recycled Copy
Thick Paper Gilbert Color Copy (163 gsm) HM-Cover (65 lb.) HM-Laser Print (32 lb.)
Thin Paper Domtar (16 lb.)
Tracing Paper —
Label Paper Avery 5352 Avery 5160
OHP Transparencies 3M CG3700
Tab Paper Avery 7103 (8.5" x 11")
See KMBS Media Guide for the latest information regarding approved paper.
Konica Minolta bizhub 751/601Specification & Installation Guide
13
Special Paper
Paper other than Normal paper, such as overhead projector transparencies and colored paper, is called special paper. Be sure to select a special paper setting for paper tray loaded with media such as overhead projector transparencies and colored paper in order to prevent operating errors.
Paper Type Icon Description
Special Paper Select this setting when the paper that is loaded is from a particular manufacturer or special paper that is not usually used. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
Thick Paper Select this setting when the thick paper that is loaded has a weight of 24.25 to 53.25 lb. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.
Thin Paper Select this setting when the Thin paper that is loaded has a weight of 13.25 to 15.75 lb. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
OHP Select this setting when overhead projector transparencies are loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.
User 1 Select this setting when user paper 1 is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
User 2 Select this setting when user paper 2 is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
User 3 Select this setting when user paper 3 is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
Tab Paper Select this setting when tab paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.
Recycled Select this setting when recycled paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
Colored Paper Select this setting when colored paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
Fine Select this setting when fine paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.*1
Labels Select this setting when label sheets are loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.
Letterhead Select this setting when the paper that is loaded is already printed with a company name or preset text and, therefore, should be differentiated from Normal paper. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.
Trace Select this setting when trace paper is loaded. A paper tray with this setting is not automatically selected when the “Auto Paper Select” setting is specified or when the paper trays are switched automatically.
*1 User settings can be changed so that the paper type can be selected automatically.
Konica Minolta bizhub 751/601Specification & Installation Guide
14
Precautions for Paper
The following types of paper should not be used, otherwise decreased print quality, paper misfeeds or damage to the machine may occur.
• Overheadprojectortransparenciesthathave already been fed through the machine (even if the transparency is still blank)
• Paperthathasbeenprintedonbyaheat-transferprinter or an inkjet printer
• Paperthatiseitherextremelythickorextremelythin
• Folded,curled,wrinkled,ortornpaper
• Paperthathasbeenleftunwrapped for a long period of time
• Damppaper,perforatedpaper,orpaper with punched holes
• Extremelysmoothorextremelyroughpaper, or paper with an uneven surface
• Paperthathasbeentreated,suchascarbon-backed,heat-sensitive or pressure-sensitive paper
• Paperthathasbeendecoratedwithfoilorembossing
• Paperofanon-standardshape(notrectangular)
• Paperthatisboundwithglue,staplesorpaperclips
• Paperwithlabelsattached
• Paperwithribbons,hooks,buttons,etc.attached
Paper Storage
Observe the following precautions when storing the paper.
• Storepaperinacool,darklocationwithlittlehumidity.
• Ifthepaperbecomesdamp,papermisfeeds may occur. Paper that has not been loaded should be kept wrapped or placed in a plastic bag and stored in a cool, dark location with little humidity.
• Storethepaperlayingflat,notstandingonitsedge.Curled paper may cause paper misfeeds.
• Keeppaperoutofthereachofchildren.
Originals
When making copies, position the original into the ADF or on the original glass.
To copy original that cannot be positioned into the ADF, position them on the original glass.
Original That Can Be Positioned into the ADF
There are four methods for using the ADF.
• Normalmethod
• Fororiginalofmixedsizes
• ForZ-foldedoriginal
• Fororiginalontabpaper
There are limits on the types of original that can be positioned with each method.
Normal method
Single-Sided Original
Double-Sided Original
Original paper type/ Weight
Normal paper: 16 lb. to 24 lb.
Original size 11" x 17" R to 5.5" x 8.5"/R and 8.5 "x 14" R
Paper capacity 100 sheets (21.25 lb. paper)
For documents of mixed sizes
Single-Sided Original
Double-Sided Original
Original paper type/ Weight
13.25 lb. to 53.25 lb.
Original size Refer to “Mixed originals paper sizes”.
Paper capacity 100 sheets (21.25 lb. paper)
Konica Minolta bizhub 751/601Specification & Installation Guide
15
Mixed Original Paper Sizes
The following chart shows the possible combinations of standard-sized paper that can be used with the “Mixed Original” setting.
Maximum Document Width*1
11" x 17" 8.5" x 11" 8.5" x 14" 8.5" x 11" 5.5" x 8.5" 5.5" x 8.5"
Document Size*2
Landscape Portrait Landscape Landscape Portrait Landscape
11" x 17" (Landscape)
8.5" x 11" (Portrait)
8.5" x 14" (Landscape)
8.5" x 11" (Landscape)
5.5" x 8.5" (Portrait)
5.5" x 8.5" (Landscape)
Possible Not Possible*1 Indicates the width of the widest original size of the mixed originals (width of the adjustable original guides of the ADF) *2 Indicates original sizes that can be specified together with the maximum original width
For Z-folded DocumentsSingle-Sided Documents
Original Paper Type/ Weight
Normal paper: 16 lb. to 24 lb., thick paper: 24.25 lb. to 53.25 lb., thin paper: 13.25 lb. to 15.75 lb.
Original size 11" x 17", 8.5" x 14", 8.5" x 11"/R, 5.5" x 8.5"/R, A3, B4, A4, B5/R, B6 R
Paper capacity 100 sheets (21.25 lb. paper)
Note: Z-folded original can only be scanned using the ADF.
Original that can be placed on the Original Glass
To copy original that cannot be positioned into the ADF, position them on the original glass.
Original Glass Original
Original type Sheets, books (spreads), three-dimensional objects
Original size 11" x 17" R to 5.5" x 8.5"/R A3 R to B6 R
Maximum weight 15 lb.
Precautions for Positioning Original into the ADF
The following types of original should not be positioned into the ADF, otherwise paper misfeeds or damage to the original may occur.
• Wrinkled,folded,curled,ortornoriginal
• Highlytranslucentortransparentoriginal,suchas overhead transparencies or trace paper
• Coatedoriginalsuchascarbon-backedpaper
• Originalprintedonpaperthickerthan53.25lb.
• Originalprintedonpaperthinnerthan13.25lb.
• Originalprintedonpaperthickerthan29.5lb.duringdouble-sided copying
• Originalthatarebound,forexample,withstaplesor paper clips
• Originalthatareboundinabookorbooklet
• OriginalthatareboundtogetherwithGlue
• Originalpagesthathavebeencutorcontaincutouts
• Labelsheets
• Offsetprintingmasters
• Originalwithbinderholes
• Originalthathavejustbeenprintedwiththismachine
REMINDER: Before positioning folded original, such as those folded in half or in three, into the ADF, be sure to flatten the pages.
Konica Minolta bizhub 751/601Specification & Installation Guide
16
IC-208 SpecificationsItem Specifications
Model Built-in print controller
Power Supply Common with the main body
Processor Speed Celeron-M 1 GHz/32-bit (shared with copier)
Memory 1,024 MB RAM (192 MB file memory) (shared with copier); 60 GB HDD (shared with copier)
Interface Ethernet port (1000Base-T/100Base-TX/ 10Base-T)
Frame Type Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAP
Supported Protocols TCP/IP, IPX/SPX, NetBEUI, AppleTalk (EtherTalk)
Print Speed bizhub 751 : 75 pages/minute bizhub 601 : 60 pages/minute (A4 600 x 600 dpi)
First Print Time Same as the first copy time of the main body
Page Description Language
PCL5e/PCL6 (XL 3.0), PS3 Emulation (3016), XPS (XML paper specification) Ver. 1.0
Operating Environment Conditions
Same as in the main body
Resolution Data 600 x 600 dpi (Print and Fax function) 400 x 400 dpi (Fax function) 200 x 200 dpi (Fax function)
Printing 1200 (equivalent) x 600 dpi
Supported Paper Sizes
Same as in the main body
Printer Fonts PCL Latin 80 Fonts Postscript 3 Emulation Latin 137 Fonts
Compatible Computers
IBM PC compatible, Macintosh (PowerPC or Intel processor)
Printer Driver
Konica Minolta PCL Driver (PCL driver)
32 bit editions Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later) Windows 2000 Professional/Server (Service Pack 3 or later) Windows XP Home/Professional (Service Pack 2 or later) Windows Server 2003 Standard Windows Vista (All versions) Windows Server 2008 Windows 7
64 bit editions Windows XP Professional (Service Pack 2 or later) Windows Server 2003 Windows Vista (All versions) Windows Server 2008 Windows 7
Item Specifications
Printer Driver (cont.)
Konica Minolta PostScript Driver (PS driver)
32 bit editions Windows 2000 Professional/Server (Service Pack 3 or later) Windows XP Home/Professional (Service Pack 2 or later) Windows Server 2003 Standard Windows Vista (All versions) Windows Server 2008 Windows 7
64 bit editions Windows XP Professional (Service Pack 2 or later) Windows Server 2003 Windows Vista (All versions) Windows Server 2008 Windows 7
PostScript PPD driver (PS-PPD)
Mac OS 9.2 or later, Mac OS X 10.2, Mac OS X 10.3, or Mac OS X 10.4, or Mac OS X 10.5*
Fax Driver 32 bit editions Windows NT Workstation 4.0/Server 4.0 (Service Pack 6 or later) Windows 2000 Professional/Server (Service Pack 3 or later) Windows XP Home/Professional (Service Pack 2 or later) Windows Server 2003 Standard Windows Vista (All versions) Windows Server 2008 Windows 7
64 bit editions Windows XP Professional (Service Pack 2 or later) Windows Server 2003 Windows Vista (All versions) Windows Server 2008 Windows 7
Utility PageScope Web Connection Compatible Web browsers: Microsoft Internet Explorer Ver. 6 or later recommended (JavaScript and Cookies enabled) Microsoft XML parser MSXML3.X must be installed when Internet Explorer Ver. 5.5 is being used. Netscape Navigator Ver. 7.02 or later (JavaScript and Cookies enabled) Mozilla Firefox Ver. 1.0 or later (JavaScript and Cookies enabled) Adobe® Flash® (Plug-in Ver. 7.0 or later required if "Flash" is selected as the display format)
Operating Environment for MetaFrame
The operation of this driver has been confirmed only in the following environments. Server OS: Windows 2000 Advanced server/ Windows 2003 Enterprise Server MetaFrame: Citrix® MetaFrame® Presentation Server 3.0, Citrix® MetaFrame® Presentation Server 4.0 Client OS: Windows 2000/Windows XP ICA Client: ICA32 bit NOTE: For operating in an environment other than those described, contact your service representative.
* May not be available at time of launch.
Konica Minolta bizhub 751/601Specification & Installation Guide
17
Scanning Function (Standard)
Type Monochrome Image Scanner
Scanning Size 5.5" x 8.5" to 11" x 17"
Scanning Resolution 600/400/300/200 dpi
Scanning Speed 75 opm (8.5" x 11" (600 dpi ))
Main Function Scan-to-Email, Scan-to-Box (HDD) (Requires opt. HDD), Scan-to-FTP, Scan-to-SMB (Desktop Folder), Scan-to-WebDAV, Scan-to-USB Memory, Scan-to-SharePoint, WS-Scan, Network TWAIN, HDD TWAIN (via Ethernet TCP/IP)
Interface Ethernet 100BaseTX/100BaseT/1000BaseT
Protocol TCP/IP (FTP, SMTP, HTTP, SMB)
Support OS Windows NT4.0 SP6, Windows 2000, (Driver) Windows XP, Windows Server 2003,
Windows Vista, Windows 7
Output Format TIFF, PDF, XPS, Encrypted PDF
Driver TWAIN
Address Setting LDAP, Import/Export address from PageScope Web Connection
Authentication Authentication in sending Email, Network User Authentication
*Text and image scanning speeds vary depending on the type of document.
Network & Device ManagementNetwork & Device ManagementPageScope Net CarePageScope NDPS GatewayPageScope EMS Plug-InsPageScope Network SetupPageScope Data AdministratorDriver Packaging UtilityHDD Back Up UtilityLog Management Utility User ToolsPageScope Web ConnectionPageScope Direct PrintPageScope Box OperatorPageScope Print Status NotifierFont Management UtilityPrint Utility for Unix
Management Toolbizhub vCare Support Optional Software PageScope WorkwarePageScope Enterprise Suite– PageScope Account Manager– PageScope Authentication Manager– PageScope My Print Manager– PageScope My Panel Manager– PageScope Net Care Device Manager (Standard)
Security
Because information assets are critical, a company needs to effectively protect against the many security risks it faces.
1) Prevent leaks of proprietary, confidential or personal information 2) Prevent unauthorized use of equipment 3) Effective data encryption 4) Protect data from being altered, duplicated or deleted 5) Prevent unauthorized access to data via the Internet 6) Protect against cyber attacks 7) Manage log history
Protective Functions: •HDDSanitizing(whendisposingofmachine) •DeleteGraphicData(aftereachjob)JobErase •LockJob(whenprintingconfidentialdocuments) •Protectdatabyrequiringdepartmentname and 8-digit password •AccountTrack •HDDLock •PreventUnauthorizedUse •OperationLogwith2,000-eventmemory •HDDEncryption •PDFScanEncryption •EncryptedNetworkPasswordPrinting •NetworkAuthentication •Scan-to-USBMemoryw/UserAuthentication •PrintfromUSBMemoryw/UserAuthentication •BiometricUserAuthentication •SMTPAuthenticationforEmail •SSL/TSLCompatibilityforPSWebConnection,PSData •AdministratorandLDAPServer •S/MIMEEncryption •ScanDataEncryption(TCP/socketSSLCompatibility) •BoxOperatorDataEncryption •VerificationofBoxDataReceipt • IPAddressFiltering •DetailedSecurityLogs •AU-201HHIDAuthentication •AU-204HMagneticStripeCardReader •AU-211PCAC/PIVSolutionwithCertificate
Konica Minolta bizhub 751/601Specification & Installation Guide
18
02/2011
How to Build a System for the bizhub 751/601 Printer/Copier/Scanner (from start to finish)
Ste
p 5
: A
dd
itio
nal
Op
tion
s
H
D-5
10
60 G
B H
ard
Dis
k D
rive
(F
or e
nhan
ced
copy
, pr
int
and
scan
func
tions
)
S
C-5
06
HD
D E
ncry
ptio
n K
it
W
T-50
4 W
orki
ng T
able
A
U-1
01 B
iom
etric
Aut
hent
icat
ion
Uni
t
(Req
uire
s W
T-50
4)
E
K-7
03
US
B In
terf
ace
Kit
A
U-2
01H
H
ID C
ard
Aut
hent
icat
ion
Uni
t
A
U-2
04H
M
agne
tic S
trip
e C
ard
Rea
der
(R
equi
res
WT-
506)
A
U-2
11P
C
AC
/PIV
Sol
utio
n
(Req
uire
s W
T-50
6)
Sta
rt:
b
izh
ub
75
1/6
01
Base
Un
it
Com
es s
tand
ard
with
: Dru
m, (
1) D
evel
oper
, A
DF,
1,0
24 M
B m
emor
y, T
ray
1 (1
,500
she
ets)
, Tr
ay 2
(1,0
00 s
heet
s), T
ray
3 (5
00 s
heet
s),
Tray
4 (5
00 s
heet
s), B
ypas
s (1
00 s
heet
s).
Tota
l sta
ndar
d pa
per
capa
city
: 3,6
00 s
heet
s
(7,6
00 m
ax.)
Ste
p 1
: P
ap
er
Su
pp
ly O
pti
on
s
LU
-405
La
rge
Cap
acity
Cas
sett
e
(4,0
00 s
heet
Let
ter
Por
trai
t)
LU
-406
La
rge
Cap
acity
Cas
sett
e
(4,0
00 s
heet
to
12"x
18")
Ste
p 2
a:
Ou
tpu
t O
pti
on
s
(One
of t
he fo
llow
ing
is r
equi
red)
S
F-60
2 S
hift
Tra
y
FS
-524
M
ulti-
Sta
plin
g Fi
nish
er
(Mul
ti-po
sitio
n S
tapl
ing
up t
o 50
she
ets)
FS
-525
M
ulti-
Sta
plin
g Fi
nish
er
(Mul
ti-po
sitio
n S
tapl
ing
up t
o 10
0 sh
eets
)
FS
-610
A
dva
nced
Fol
din
g Fi
nish
er
(Mul
ti-po
sitio
n S
tapl
ing,
Sad
dle-
Fold
Stit
ch,
Tri-
Fold
)
Ste
p 2
b: A
dd
itio
nal
Ou
tpu
t O
pti
on
s
P
I-50
4 C
over
Inse
rter
(P
ost
Engi
ne C
over
Inse
rter
)
P
K-5
05
Hol
e P
unch
Kit
(S
elec
tabl
e 2/
3-ho
le p
unch
)
Z
U-6
05
Z-F
old
/Pun
ch K
it
(Add
s Z-
fold
and
sel
ecta
ble
2/3-
hole
pun
ch)
Ste
p 3
: C
on
trolle
r O
pti
on
IC
-208
Im
age
Con
trol
ler
(Req
uire
d fo
r pr
intin
g)
Ste
p 4
: A
nalo
g F
ax
Op
tion
s
FK
-502
Fa
x K
it (In
clud
es M
K-7
16 M
ount
Kit)
FK
-502
Fa
x B
oard
(Req
uire
d fo
r 2n
d fa
x lin
e)
IC-2
08 Im
age
Con
trol
ler
500
PK
-505
FS-6
10
LU-4
05
FK-5
02
LU-4
06
60 G
B H
DD
Kit
WT-
504
Wor
king
Tab
le
EK
-703
Lo
cal I
nter
face
Kit
AU
-201
H H
ID C
ard
Aut
h. U
nit
AU
-204
H
Mag
netic
Str
ipe
Car
d R
eade
r
AU
-211
P C
AC
/PIV
Sol
utio
n
AU
-101
Bio
met
ric A
uth.
Uni
tS
C-5
06
HD
D E
ncry
ptio
n K
it
PI-
504
ZU-6
05
1
FK-5
02 F
ax K
it
SF-
602
FS-5
25 F
S-5
24
2 4
500
1,000
1,500
4,000
Lett
er/
Po
rtra
it
4,000
12"x
18"
3
How to Build a System for the bizhub 751/601 Printer/Copier/Scanner (from start to finish)
Konica Minolta bizhub 751/601Specification & Installation Guide
19
02/2011
Accessory Options for 751/601 Printer/Copier/Scanner
ACCeSSOrieS item NO. DeSCriPtiON NOteS
BASe UNitbizhub 751 A0PN011 751 Digital Printer/Copier/Scanner/Fax Includes: Drum, (1) Developer, DF-614, Duplex Unit, 1,024 MB memory (max.);
bizhub 601 A0PP011 601 Digital Printer/Copier/Scanner/Fax Tray 1 (1,500 sheets), Tray 2 (1,000 sheets), Tray 3 (500 sheets), Tray 4 (500 sheets), Bypass (100 sheets) and PC Drum. Requires AC120V, 16A (NEMA receptacle 5-20R).
DOCUmeNt HANDliNgDF-614 — Reversing Document Feeder (Standard) 100 sheet capacity. Up to 75 opm.
OUtPUt OPtiONSFS-524 A0R10Y1 Multi-Stapling Finisher Sorting and Multi-position stapling up to 50 sheets.
FS-525 A0R20Y1 Multi-Stapling Finisher Sorting and Multi-position stapling up to 100 sheets.
FS-610 A0R30Y1 Advanced Folding Finisher Multi-position stapling, tri-fold, half-fold, saddle stitch booklets.
SF-602 A0PX0Y1 Shift Tray Offset stacker (up to 1,250 sheets – 8.5"x11").
PI-504 A0PV0Y1 Post Engine Cover Inserter Add pre-printed covers and post-process staple, fold, punch.
PK-505 15US Punch Kit Adds 2/3-hole punch.
ZU-605 A0R00Y1 Z-Fold/Punch Kit Adds Z-fold and selectable 2- and 3-hole punch.
PAPer SUPPly OPtiONSLU-405 A0PR0Y2 Large Capacity Cassette 4,000 sheets (20 lb. bond) of letter portrait.
LU-406 A0PT0Y2 Large Capacity Cassette 4,000 sheets (20 lb. bond) up to 12"x18".
ADDitiONAl OPtiONSHD-510 A0P7WY1 60 GB HDD Kit Required to support Scan-to-HDD and other functions.
See bizhub 751/601 Product and Sales Guide for details
EK-703 A0P4WY1 Local Interface Kit Required for local USB printing.
SC-506 A0PCWY1 HDD Encryption Kit Encrypts all data stored on the hard disk drive and provides encryption priority and overwrite priority selections.
AU-101 A09MWY0 Biometric Authentication Unit Compatible with C650, C550, C451, C353, C253, C203 and 501, 421, 361.
WT-504 A0PWWY1 Working Table Required for AU-101 Biometric Authentication Unit.
AU-201H 7640005064 HID Card Authentication Unit Compatible with C650, C550, C451, C353, C253, C203 and 501, 421, 361.
AU-204H 7640013468 Magnetic Stripe Card Reader Requires WT-506 Working Table.
AU-211P 7640008082 CAC/PIV Solution with Certificate Requires WT-506 Working Table. Contact your local Government Account Manager for information.
CONtrOller OPtiONIC-208 A0P90Y1 Image Controller Adds PCL5e/PCL XL v.3.0/PS3 (3016) Emulation,
XPS (XML page specifications) printing capability.
FAx OPtiONSFK-502 Kit A0PNX001 FK-502 Fax Kit 33.6 Kbps faxing. Includes MK-716 Mount Kit.
FK-502 15LB Fax Board Required for 2nd fax line.
CONSUmABleS yielDS*
CONSUmABle item NO. DeSCriPtiON yielD
TN-710 02XJ Toner 55,000 @ 6%*
DR-710 02XL Photo Receptor 500,000
DV-710 02XK Developer 250,000
SK-602 14YK Staples for FS-524 5,000 (x3)
MS-5C 4448121 Staples for FS-610 5,000 (x3)
MS-10A 4599141 Staples for FS-525 5,000 (x3)
PM Parts Kit DA0PNPM25 PM Parts Kit 250,000
* Yields based on industry standard 6% page coverage.
Accessory Options for bizhub 751/601 Printer/Copier/Scanner