Durable metalized microprismatic construction
Resistant to face film delamination
Aggressive adhesive for plastic substrates
Wide angle reflectivity for greater visibility
Easy to cut and trim after application
AURA® 150 METALIZED HIGH INTENSITY PRISMATIC
®
DURABLE PERFORMANCEIt is inevitable that construction work zone barricades, delineators, or vertical panels will take a beating. They get knocked over, driven over, kicked around, and thrown. No reflective sheeting can completely withstand this abuse, but the AURA® 150 Metalized High Intensity Prismatic sheeting holds up better than most. Unlike other reflective work zone sheetings, which rely on two-layer cellular constructions, AURA® 150 has a unique single-layer construction. There is no separate face layer to delaminate or open cells to allow water or dirt to migrate into the product. This makes AURA® 150 more resistant to work zone abuse, allowing for longer barricade life.
CUSTOM PRINTING & CONVERTINGAURA® 150 can be customized through our screen printing and converting services. If a specific pattern cannot be pre-printed, we can screen print or die-cut AURA® 150 for your specific needs.
URA AO p t i c a l S y S t e m S
®7415 Whitehall Street, Suite 111Fort Worth, Texas 76118 USAGeneral / International Inquires: +1 (801) 668-3439USA Sales Inquiries: +1 (682) 227-1208www.auraopticalsystems.com
Orange / White chevrons for North America. Available in 4" and 6” stripe widths for left and right orientations.
Red / White chevron striping for road closures in the United States. Available in 6" Left or 6" Right striping.
Red / Yellow chevron patterns for X3vertical delineators in Sweden. Available aspre-cut sheets.
Red / White chevron panels for Europeanwork zone delineators and beacons.Available in rolls or pre-cut sheets.
AVAILABLE CONFIGURATIONSAURA® 150 is available in a variety of standard pre-stripe configurations for all parts of the world. The product can also be customized for specific applications where pre-printed striping would be advantageous.