Assembly and Care Instructions
FOOD SAFETY SPECIALTIES INC.How to assemble your DuraLoc cleaning tools
DuraLoc Dual Cavity Mop Bucket Assembly Instructions
DuraLoc™ Tool Assembly Instructions
© 2016 Ecolab USA Inc. For assistance contact customer support - 877.603.1187
1
4
1
2
5
2
3
6
3
To secure DuraLoc Dual Cavity Casters onto bucket, flip DuraLoc Dual Cavity Mop Bucket upside down. Place casters in the holes and tap or push until they snap into position.
Secure the DuraLoc Dual Cavity Mop Bucket Wringer handle with the enclosed screw and fastener. Place the angled portion of the handle facing inward. Insert the screw so that the nut is facing away from the mop bucket wringer pocket.
Handle can be assembled to accommodate left- or right-handed employees.
Attach the Universal Insert Holder onto the Handle by aligning the grooves with the slots. Twist the large connector to secure.
Place the gray removable insert bucket into the back of the dual cavity bucket.
Place the removable wet floor sign handle hanger on the back of the gray portion of the wringer.
Slide the Squeegee, Mop, or Broom into the holder until it snaps into place.
Place the DuraLoc Mop Bucket Wringer on top of the gray removable insert bucket.
Attach the DuraLoc Mop Clip on the front of the Mop Bucket Wringer with the two remaining screws. Do not over tighten screws.
Press the Ecolab lever and slide Squeegee, Mop or Broom out to remove.
Moss Foam Squeegee, Rubber Squeegee, Angle Broom and Mop Assembly Instructions
FOOD SAFETY SPECIALTIES INC. FOOD SAFETY SPECIALTIES INC.How to assemble your DuraLoc cleaning tools
Big Dipper Deck Brush Assembly Instructions
DuraLoc Tool Assembly Instructions
© 2016 Ecolab USA Inc. For assistance contact customer support - 877.603.1187
1
1
1
2
2
2
3
3
3
Snap the plastic DuraLoc Big Dipper insert onto the DuraLoc Universal Insert Holder.
Insert the DuraLoc Mop Brush onto the Universal Insert Holder by lining up the circle and the 2 holes. Attach the Universal Insert Holder to the DuraLoc Light Weight Handle by placing the end of the handle on the ground and assemble at eye level.
Store tools properly in Dura Loc Storage Hanger to ensure that Tool Heads do not touch floor when stored
Place the end of the DuraLoc Over-Mold Handle on the ground and assemble at eye level. Line up grooves inside the Deck Brush Assembly with the Dura Loc Over-Mold Handle.
Line up grooves inside the Universal Insert Handle with the Universal Handle and twist the connection to secure.
Rinse Mops, Squeegees and Deck Brushes after every use
Twist the large connector to secure.
Slide the mop head over the razor-style holder until the mop snaps into place.
Discard and replace Tool Heads when worn
Mop Brush Attachment Assembly Instructions
Dura Loc Care InstructionsFollowing these basic instructions will maximize the life of your Tool
DuraLoc™ Grease Release Mop61700-01-00 Blue Each 61700-02-00 Yellow Each 61700-03-00 Red Each 61700-05-00 Green Each 61700-09-00 Gray Each
DuraLoc™ 17 oz. Looped End Mop61700-11-00 Blue Each 61700-12-00 Yellow Each 61700-13-00 Red Each 61700-15-00 Green Each 61700-19-00 Gray Each
DuraLoc™ Mop Brush61701-01-00 Each
DuraLoc™ Dual Cavity Mop Bucket61702-01-31 Blue Each 61702-02-31 Yellow Each 61702-03-31 Red Each 61702-05-31 Green Each 61702-09-31 Gray Each
DuraLoc™ DC Mop Bucket Wringer61702-11-31 Blue Each 61702-12-31 Yellow Each 61702-13-31 Red Each 61702-15-31 Green Each 61702-19-31 Gray Each
DuraLoc™ DC Mop Insert Bucket61702-20-00 Each
DuraLoc™ DC Casters61702-30-00 Pack of 4
DuraLoc™ DC Sign Holder61702-40-00 Each
DuraLoc™ DC Mop Handle Hook61702-50-00 Each
DuraLoc™ Big Dipper™61703-00-00 Each
DuraLoc™ Deck Brush61703-01-00 Blue Each 61703-02-00 Yellow Each 61703-03-00 Red Each 61703-05-00 Green Each 61703-07-00 Black Each
DuraLoc™ Angle Broom Insert 61704-01-00 Blue Each 61704-02-00 Yellow Each 61704-03-00 Red Each 61704-05-00 Green Each 61704-07-00 Black Each
DuraLoc™ Outdoor Sweep61705-01-00 Blue Each 61705-02-00 Yellow Each 61705-03-00 Red Each 61705-05-00 Green Each 61705-07-00 Black Each
DuraLoc™ Squeegee Insert, Moss Foam61706-01-00 Blue Each 61706-02-00 Yellow Each 61706-03-00 Red Each 61706-05-00 Green Each 61706-07-00 Black Each
DuraLoc™ Squeegee Insert, Rubber61706-11-00 Blue Each 61706-12-00 Yellow Each 61706-13-00 Red Each 61706-15-00 Green Each 61706-17-00 Black Each
DuraLoc™ Zone Color Sleeve, Long 61707-01-00 Blue Each 61707-02-00 Yellow Each 61707-03-00 Red Each 61707-05-00 Green Each
DuraLoc™ 54” Straight Handle, Overmold61709-00-00 Each
DuraLoc™ 54” Straight Handle, Lightweight61709-01-00 Each
DuraLoc™ Universal Insert Holder61713-00-00 Each
DuraLoc™ 24” Tool Holder System61710-00-00 Each
DuraLoc™ Tool Holder Double Hanger61711-00-00 Each
DuraLoc™ Tool Holder Single Hanger61712-00-00 Each
WORLDWIDE HEADQUARTERS 370 Wabasha St. NSt. Paul, MN 55102866 781 8787www.ecolab.com
FOOD SAFETY SPECIALTIES INC. 1801 Riverbend West DriveFort Worth, TX 76118800 321 3687foodsafety.ecolab.com
© 2016 Ecolab USA Inc. All rights reserved. FLOORTOOLS-000000
DuraLoc™ Tool Assembly Instructions