Index
Description of Products Page No.
Sugarcane Farm Solutions
Cane Thumper 2
Sickle Sword 3
Detrasher 4
Shredder 5
Rice Farm Solutions
Rice Transplanter 6 - 7
Harvesting Crop Solutions
Combine Harvester 8 - 10
Post Hole Digger 11
Front End Loader 12
Laser Leveler 13
Basic Farm Implements
Hydraulic Reversible Plough 14
Disc Plough 15
Mounted Offset Disc Harrow 16
Rotavator 17
Cultivator (Tiller) 18 - 19
Forth Coming Farm Solutions 20
The data contained in this hand book are given for information only and are not binding.
Specification/Technical data/Design are subject to change without prior notice for product improvements.
2
Features
Cane Thumper
Cane Thumper, a self driven walk behind machine with patented and best in class German double blade cutting
technology. It is manufactured in Germany to high quality and safety standards. An important advantage of this machine is that it is able to cut lodged cane. This is designed for the ef f i c ient , economic and consistent cane cutting.
Robust design : For professional use (Patent protected)
Excellent cutting : High harvesting speedperformance
Improved cutting : Clean cut base and no stool damage
Long service life : Patented ESM Carbodux knife sections resistant against foreign obstacles such as stones.
Minimal Maintenance : Low Blade speed, minimal blade wear, easy replacement of knife assemblies.
Comfortable handling : Vibration free action
Environment friendly : Low power consumption
Safe handling : Zero second safety stop for drive mechanism, foot protection guard.
0Easy Handling : Cuts even on slopes (upto 55% / 25
0Continuously; 80% / 35 intermediate) cuts lodged cane, cuts green cane.
3
Sickle Sword
Modern, efficient and e a s y w a y o f h a r v e s t i n g sugarcane. It takes
very little time as compared to manual cutting. The advanced ESM Carbodux knife double blade unit enables to cut as close to the ground as possible. And it doesn't wear off even when faced with stones and other foreign particles.
Cutting length : 110 mm to 170 mm
Three point linkage : Suitable for Cat I & II
Overall weight : 200 kg
Cutting Height : Adjustable with the help of inner and outer shoes provided on the cutting unit.
Safety mechanism : Spring loaded ratchet on the cutting arm. Hydraulically operated weight transfer mechanism to save stool of the already cut cane. Hydraulic lifting of cutting blades on turns.
Operating Speed : 1.6 to 3.5 km
Output : 20 - 30 tons / hour depending upon crop density.
3
3
3
3
Adjustable skid heights for cutting on ridges.
Patented double action cutter bar.
S u p p o r t e d w i t h f l o a t i n g mechanism to follow the field / furrow contours and not spoil the already cut cane stool.
Capable of cutting any crops, including grass mowing.
Technical Data Technical Data
Features
Width of cut : According to the planted ROWS
Section Pattern : 70 - 84 mm
Cutting Speed : Depending upon crop volume
Power Consumption : max. 3kW (per 1m of cutting width)
Knife driving system : Heavy duty closed oilbath drive, maintenance free
Carrier unit : KOPPL 4M 508HLS
Engine : Hatz diesel 1 30, 4 stroke diesel engine
Power : 4.8kW (6.5D/N-HP) at 2800 RPM
Transmission : Mechanical gear box, with 4 forward and 3 reverse gears, with lockable differential, wheel reduction gear drives.
Brakes : Safety and parking brakes
Ergonomical Handlebar : Mec. Vertical / Lateral adjustable, operator safety device, Fast F/R change
Special Features : Donaldson air filter, headlight, hourmeter
Additional options : Twin tyres, metal grid wheels.
2
Features
Cane Thumper
Cane Thumper, a self driven walk behind machine with patented and best in class German double blade cutting
technology. It is manufactured in Germany to high quality and safety standards. An important advantage of this machine is that it is able to cut lodged cane. This is designed for the ef f i c ient , economic and consistent cane cutting.
Robust design : For professional use (Patent protected)
Excellent cutting : High harvesting speedperformance
Improved cutting : Clean cut base and no stool damage
Long service life : Patented ESM Carbodux knife sections resistant against foreign obstacles such as stones.
Minimal Maintenance : Low Blade speed, minimal blade wear, easy replacement of knife assemblies.
Comfortable handling : Vibration free action
Environment friendly : Low power consumption
Safe handling : Zero second safety stop for drive mechanism, foot protection guard.
0Easy Handling : Cuts even on slopes (upto 55% / 25
0Continuously; 80% / 35 intermediate) cuts lodged cane, cuts green cane.
3
Sickle Sword
Modern, efficient and e a s y w a y o f h a r v e s t i n g sugarcane. It takes
very little time as compared to manual cutting. The advanced ESM Carbodux knife double blade unit enables to cut as close to the ground as possible. And it doesn't wear off even when faced with stones and other foreign particles.
Cutting length : 110 mm to 170 mm
Three point linkage : Suitable for Cat I & II
Overall weight : 200 kg
Cutting Height : Adjustable with the help of inner and outer shoes provided on the cutting unit.
Safety mechanism : Spring loaded ratchet on the cutting arm. Hydraulically operated weight transfer mechanism to save stool of the already cut cane. Hydraulic lifting of cutting blades on turns.
Operating Speed : 1.6 to 3.5 km
Output : 20 - 30 tons / hour depending upon crop density.
3
3
3
3
Adjustable skid heights for cutting on ridges.
Patented double action cutter bar.
S u p p o r t e d w i t h f l o a t i n g mechanism to follow the field / furrow contours and not spoil the already cut cane stool.
Capable of cutting any crops, including grass mowing.
Technical Data Technical Data
Features
Width of cut : According to the planted ROWS
Section Pattern : 70 - 84 mm
Cutting Speed : Depending upon crop volume
Power Consumption : max. 3kW (per 1m of cutting width)
Knife driving system : Heavy duty closed oilbath drive, maintenance free
Carrier unit : KOPPL 4M 508HLS
Engine : Hatz diesel 1 30, 4 stroke diesel engine
Power : 4.8kW (6.5D/N-HP) at 2800 RPM
Transmission : Mechanical gear box, with 4 forward and 3 reverse gears, with lockable differential, wheel reduction gear drives.
Brakes : Safety and parking brakes
Ergonomical Handlebar : Mec. Vertical / Lateral adjustable, operator safety device, Fast F/R change
Special Features : Donaldson air filter, headlight, hourmeter
Additional options : Twin tyres, metal grid wheels.
4
Detrasher
The solution being offered by App l iTrac , Mah indra & Mahindra l imi ted is a detrasher.
5
Shredder
The solution being offered by App l iTrac , Mah indra & Mahindra limited is a trash shredder. This trash shredder
can be used on the dry trash left behind in the field after the cane has been harvested. The trash that is left behind hinders with the ratoon growth as it depleted the soil by reducing soil aeration.
3
3
3
3
3
3
3
Modern technology used to build this tractor drawn implement
Easy availability of spares and service
0.5 – 0.6 hectares per hour
Fuel consumption is 9 – 10 liters per acre
The trash is shredded and spread uniformly into soil which enhances the soil organic matter contained fastening the decomposition
Ensures soil regain optimum moisture and permits proper aeration of soil to enhance crop productivity
Enriches soil fertility and increases crop productivity by 6-7 tons/acre
Technical Data
Features
Total Weight (Kg) : 1025
Total Width of Machine (mm) : 2135
Total Working Width (mm) : 1830
Total Length of Machine (mm) : 3600
Number of Blades : 162
RPM of working shaft : 1350
Tractor Range suitability (HP) : 45 to 70
4
Detrasher
The solution being offered by App l iTrac , Mah indra & Mahindra l imi ted is a detrasher.
5
Shredder
The solution being offered by App l iTrac , Mah indra & Mahindra limited is a trash shredder. This trash shredder
can be used on the dry trash left behind in the field after the cane has been harvested. The trash that is left behind hinders with the ratoon growth as it depleted the soil by reducing soil aeration.
3
3
3
3
3
3
3
Modern technology used to build this tractor drawn implement
Easy availability of spares and service
0.5 – 0.6 hectares per hour
Fuel consumption is 9 – 10 liters per acre
The trash is shredded and spread uniformly into soil which enhances the soil organic matter contained fastening the decomposition
Ensures soil regain optimum moisture and permits proper aeration of soil to enhance crop productivity
Enriches soil fertility and increases crop productivity by 6-7 tons/acre
Technical Data
Features
Total Weight (Kg) : 1025
Total Width of Machine (mm) : 2135
Total Working Width (mm) : 1830
Total Length of Machine (mm) : 3600
Number of Blades : 162
RPM of working shaft : 1350
Tractor Range suitability (HP) : 45 to 70
6
Rice Transplanter
N e w M a h i n d r a R i c e Transplanter: the perfect a n s w e r t o r i c e t r a n s p l a n t a t i o n . T h i s
advanced machine ensures accurate spacing, thus controlling the precise plant population in each row. What's more, it is a boon when it comes to proper de-weeding and spraying of the fields. It's easy to operate, saves significantly on the costs, and can cover almost 80-120 acres in a single season. Undoubtedly, another "must-have" agricultural equipment from Mahindra.
Model : PF 455S
Type : Walk behind 2-wheel 3 float type
Engine
Type : Air cooled 4-stroke petrol engine
Bore x Stroke : 62mm x 43 mm
Rated Horsepower : 2.3HP @ rated rpm
Rated rpm : 3600 rpm
Displacement : 130 cc
Starting mechanism : Recoil Starter
Transmission
No. of Speeds : 2F + 1R
Transplanting speed : 1.22 - 2.66 kmph
Travelling speed : 5.18 kmph
Planting Mechanism
Type of Seedling : Mat type
No. of Planting arms : 4
Row spacing : 30 cm (Standard)
Number of saplings per hill : 3~52No. of hills per m : 27 / 30 / 33
Hill spacing : 15.7 / 13.8 / 12.2 cm
Dimensions & Capacities
Length : 2450 mm
Width : 1480 mm
Height : 840 mm
Weight : 170 kg
Fuel tank capacity : 3.2 lit
7
Rice Transplanter
Self Adjusting Float mechanism Puddled soil put on top of polythene sheet in the fieldTechnical Data
Features Nursery Preparations
Spare seeding tray Use of frame to cut the mat as per tray dimension of rice transplanter
Rubber lug wheels Sprouted paddy will be ready for transplantation on 15th-18th day.
6
Rice Transplanter
N e w M a h i n d r a R i c e Transplanter: the perfect a n s w e r t o r i c e t r a n s p l a n t a t i o n . T h i s
advanced machine ensures accurate spacing, thus controlling the precise plant population in each row. What's more, it is a boon when it comes to proper de-weeding and spraying of the fields. It's easy to operate, saves significantly on the costs, and can cover almost 80-120 acres in a single season. Undoubtedly, another "must-have" agricultural equipment from Mahindra.
Model : PF 455S
Type : Walk behind 2-wheel 3 float type
Engine
Type : Air cooled 4-stroke petrol engine
Bore x Stroke : 62mm x 43 mm
Rated Horsepower : 2.3HP @ rated rpm
Rated rpm : 3600 rpm
Displacement : 130 cc
Starting mechanism : Recoil Starter
Transmission
No. of Speeds : 2F + 1R
Transplanting speed : 1.22 - 2.66 kmph
Travelling speed : 5.18 kmph
Planting Mechanism
Type of Seedling : Mat type
No. of Planting arms : 4
Row spacing : 30 cm (Standard)
Number of saplings per hill : 3~52No. of hills per m : 27 / 30 / 33
Hill spacing : 15.7 / 13.8 / 12.2 cm
Dimensions & Capacities
Length : 2450 mm
Width : 1480 mm
Height : 840 mm
Weight : 170 kg
Fuel tank capacity : 3.2 lit
7
Rice Transplanter
Self Adjusting Float mechanism Puddled soil put on top of polythene sheet in the fieldTechnical Data
Features Nursery Preparations
Spare seeding tray Use of frame to cut the mat as per tray dimension of rice transplanter
Rubber lug wheels Sprouted paddy will be ready for transplantation on 15th-18th day.
98
Combine Harvester (Wheel) Combine Harvester (Crawler)
Highest grain recovery in the shortest time. Multi crop kit suitable for Wheat, Paddy, Soyabean, Sunflower, Gram.
Safflower, Mustard etc. crops.
Working successfully in different climatic and field conditions across the country from Punjab to Kerala & Gujarat to West Bengal.
Technical Data
Features
Technical Data
Features
Type : Crawler Type
Engine
Type : 4 Cylinder, 4 Stroke, Water Cooled Diesel Engine
Power : 75 BHP at 3000 r.p.m.
Cutting Mechanism
Cutter Bar
Working width : 2.10 m (7 feet)
Reel
Type : Pick up
Speed adjustment : 2 speeds by changing sprockets
Height adjustment : Hydraulic
Threshing Mechanism
Rotor
Threshing & separating : 480 mmdrum dia.
Threshing section width : 560 mm
Separating section width : 1225 mm
Concave
Width : 575 mm
Clearance : Adjustable Mechanically
Cleaning Mechanism
Type : Forced air cleaning fan
Sieve cleaning area : 1.24 sq.m.
Ground Drive
Fully Hydraulic : Controlled independently by two levers on operators platform
Speed range : 0-9 km/hr
Track Assembly
No. of rubber : 61 (each side)grousers
Width of belt : 450 mm
Length of belt : 1820 mmon ground
Main Dimensions
Overall width : 2535 mm
Overall length : 5370 mm
Overall height : 2805 mm
Track gauge : 1370 mm
Outer of track : 1820 mm
Ground clearance : 262 mm
Capacities
Grain tank : 1200 liter
Fuel tank : 110 liter
Weight
Grain tank empty : 4800 kg
Grain tank full : 5700 kg
Type : Wheel Type
Engine
Make : Ashok Leyland Model ALU-400, C2/C3
Power : 105 BHP at 2200 r.p.m.
Air Cleaner : Twin Oil Bath type
Cutting Mechanism
Cutter Bar
Working width : 4.2 m (14 feet)
Min. cutting Height : 60 mm
Reel
Type : Pick up
Speed Adjustment : Mechanical
Height adjustment : Hydraulic
Threshing & Cleaning Mechanism
Threshing Drum
Width : 1274 mm
Diameter : 600 mm
Speed : 550-1125 r.p.m
Adjustment : Mechanical
Cleaning Sieve
Upper sieve area : 2.28 sq. meter
Lower sieve area : 1.55 sq. meter
Concave
Clearance : Adjustable Mechanically
Starw Walker
No. : 5
No. of steps : 5
Area : 5.2 sq. meter
Adjustment Mechanical
Tyres
Front : (18.4/15-30) 14 PR
Rear : (7.50-16) 12 PR
Road Speed
Forward
1st gear : 1.5 to 3.5 km/hr
2nd gear : 2.3 to 8.5 km/hr
3rd gear : 8.5 to 20 km/hr
Reverse : 3.5 Km/hr.
Track & Base
Wheel track : 2407 mm
Wheel base : 3588 mm
Steering & Brakes
Steering : Hydrostatic
Brakes : Disc type mechanical
Capacities
Grain tank : 2.0 cubic meter
Fuel tank : 230 liter
3
3
3
3
3
3
3
3
Low fuel consumption and maintenance free.
Light steering, small turning radius and adjustable cutter bar height.
Bigger dia of the ‘Rotor’ for more output.
Low speed/high torque Hydraulic motor - Less wear tear - Longer life.
Sturdy & low ratio Reduction Gear Box - Longer life.
Bigger dia discharge auger for faster unloading.
Ledger plate & Knife guard cutting system for longer life of cutting blade.
Least grain loss and hence highest yield / acre.
3
3
3
3
3
3
3
3
3
Light steering, small turning radius and adjustable cutter bar height.
Bigger dia of the ‘Rotor’ for more output.
“BRIDGESTONE” Track for reliability and longer life.
Low speed/high torque Hydraulic motor - Less wear tear - Longer life.
Sturdy & low ratio Reduction Gear Box - Longer life.
Heavy/thick sheet metal for durability of cutter bar pan, elevators, etc.
Bigger dia discharge auger for faster unloading - saves time & improves efficiency.
Ledger plate & Knife guard cutting system for longer life of cutting blade.
Least grain loss and hence highest yield / acre.
98
Combine Harvester (Wheel) Combine Harvester (Crawler)
Highest grain recovery in the shortest time. Multi crop kit suitable for Wheat, Paddy, Soyabean, Sunflower, Gram.
Safflower, Mustard etc. crops.
Working successfully in different climatic and field conditions across the country from Punjab to Kerala & Gujarat to West Bengal.
Technical Data
Features
Technical Data
Features
Type : Crawler Type
Engine
Type : 4 Cylinder, 4 Stroke, Water Cooled Diesel Engine
Power : 75 BHP at 3000 r.p.m.
Cutting Mechanism
Cutter Bar
Working width : 2.10 m (7 feet)
Reel
Type : Pick up
Speed adjustment : 2 speeds by changing sprockets
Height adjustment : Hydraulic
Threshing Mechanism
Rotor
Threshing & separating : 480 mmdrum dia.
Threshing section width : 560 mm
Separating section width : 1225 mm
Concave
Width : 575 mm
Clearance : Adjustable Mechanically
Cleaning Mechanism
Type : Forced air cleaning fan
Sieve cleaning area : 1.24 sq.m.
Ground Drive
Fully Hydraulic : Controlled independently by two levers on operators platform
Speed range : 0-9 km/hr
Track Assembly
No. of rubber : 61 (each side)grousers
Width of belt : 450 mm
Length of belt : 1820 mmon ground
Main Dimensions
Overall width : 2535 mm
Overall length : 5370 mm
Overall height : 2805 mm
Track gauge : 1370 mm
Outer of track : 1820 mm
Ground clearance : 262 mm
Capacities
Grain tank : 1200 liter
Fuel tank : 110 liter
Weight
Grain tank empty : 4800 kg
Grain tank full : 5700 kg
Type : Wheel Type
Engine
Make : Ashok Leyland Model ALU-400, C2/C3
Power : 105 BHP at 2200 r.p.m.
Air Cleaner : Twin Oil Bath type
Cutting Mechanism
Cutter Bar
Working width : 4.2 m (14 feet)
Min. cutting Height : 60 mm
Reel
Type : Pick up
Speed Adjustment : Mechanical
Height adjustment : Hydraulic
Threshing & Cleaning Mechanism
Threshing Drum
Width : 1274 mm
Diameter : 600 mm
Speed : 550-1125 r.p.m
Adjustment : Mechanical
Cleaning Sieve
Upper sieve area : 2.28 sq. meter
Lower sieve area : 1.55 sq. meter
Concave
Clearance : Adjustable Mechanically
Starw Walker
No. : 5
No. of steps : 5
Area : 5.2 sq. meter
Adjustment Mechanical
Tyres
Front : (18.4/15-30) 14 PR
Rear : (7.50-16) 12 PR
Road Speed
Forward
1st gear : 1.5 to 3.5 km/hr
2nd gear : 2.3 to 8.5 km/hr
3rd gear : 8.5 to 20 km/hr
Reverse : 3.5 Km/hr.
Track & Base
Wheel track : 2407 mm
Wheel base : 3588 mm
Steering & Brakes
Steering : Hydrostatic
Brakes : Disc type mechanical
Capacities
Grain tank : 2.0 cubic meter
Fuel tank : 230 liter
3
3
3
3
3
3
3
3
Low fuel consumption and maintenance free.
Light steering, small turning radius and adjustable cutter bar height.
Bigger dia of the ‘Rotor’ for more output.
Low speed/high torque Hydraulic motor - Less wear tear - Longer life.
Sturdy & low ratio Reduction Gear Box - Longer life.
Bigger dia discharge auger for faster unloading.
Ledger plate & Knife guard cutting system for longer life of cutting blade.
Least grain loss and hence highest yield / acre.
3
3
3
3
3
3
3
3
3
Light steering, small turning radius and adjustable cutter bar height.
Bigger dia of the ‘Rotor’ for more output.
“BRIDGESTONE” Track for reliability and longer life.
Low speed/high torque Hydraulic motor - Less wear tear - Longer life.
Sturdy & low ratio Reduction Gear Box - Longer life.
Heavy/thick sheet metal for durability of cutter bar pan, elevators, etc.
Bigger dia discharge auger for faster unloading - saves time & improves efficiency.
Ledger plate & Knife guard cutting system for longer life of cutting blade.
Least grain loss and hence highest yield / acre.
10
Combine Harvester (Tractor Mounted)
Technical Data
Features
Type : Tractor Mounted Type
Engine
Model : NE 457
No. of Cylinder : 4
Displacement : 3192 cc
Rated RPM : 2100
Max. Torque : 21.4 kg-m
Engine HP : 56
PTO HP : 52
SFC : 176 gm/BHP Hr.
Air Cleaner
Dry Air Cleaner with clog indicator
Transmission
8 Forward + 8 Reverse, Mechanical Constant Mesh
Speeds
Forward : 3.16 to 32.01 kmph
Reverse : 4.79 to 13.71 kmph
Clutch
Dual Clutch : 11” x 11”
PTO
Reverse PTO, 6 splines
Brakes
Oil immersed brake with auto swing arrester
Harvester Tyre Size
Drive Wheel : 16.9 x 28 (12 PR)
Steering Wheel : 6.5 x 20 (8 PR)
Cutter Bar Assembly
Effective Width : 3600 mm
Working Width : 3900 mm
No. of Blades : 49
Cutting Platform
3280 mm (Dia.) x 3840 mm (Width)
No. of Scoops : 16
Blower
Dia. : 550 mm
Width : 1100 mm
No. of Blades : 4
Separating Mechanism
Sleeves : Adjustable Open Lip
No. of Walkers : 5
3
3
3
3
3
3
Low fuel consumption.
Conveniently placed directional control levers for lifting and lowering of cutter bar.
Cutter bar augur with prong for effective crop feeding.
Sturdy and long life reel design.
Chain drive system to increase transmission efficiency.
Multiple usage when tractor is dismounted from harvester combine during off season.
11
Post Hole Digger
Mahindra offers Post Hole Digger, it is a digging tool for a wide var iety of applications - like fencing/
tree plantations. Auger size can be decided as per the required hole size. The digging gets done at a faster pace and neater way as compared to manual digging. It is fastest method to dig up hole as it is driven by PTO.
Technical Data
Auger Length : 30"
Auger Flight Thickness : 1/4"
Auger Pipe : 2 ½" ID
Auger Teeth : Forged, Individually Replaceable
40 degree angle installed on flat side
50 degree angle installed on angled side
Number of Teeth : 6" - 2 teeth, 9" & 12" - 4 teeth
Pilot : Cast steel, 3 drill points
Driveline : Cat. II Shearbolt
Maximum Operating PTO Speed : 300 RPM
3-Point Hitch Cat. : Cat. I
Boom Tube : 2 7/8" O.D.
Yoke Tube : 2 7/8" O.D.
Options and Accessories
Auger Sizes (Options) : 6", 9" or 12"
Auger Extensions (Accessories) : 7" & 14" Extensions Available
Cat. III Torque Limiter Driveline : Not Available
Hydraulic Down Pressure Kit : Available
Storage Stand : Available
Features
3
3
3
3
3
It can dig up to diameter of 6", 9", 12", 18",24”.
Shorter yoke and boom tubing allows Post Hole Digger to be used on sub compact utility tractors also.
Replaceable hardened steel points on auger. Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged.
3 Point hook up Design makes it possible to back up to the Post Hole Digger with a tractor and hook up and disconnect with ease and safety.
Storage capabilities Digger stand allows Post Hole Digger to be stored safely and efficiently. The stand allows easy hook up in future use.
10
Combine Harvester (Tractor Mounted)
Technical Data
Features
Type : Tractor Mounted Type
Engine
Model : NE 457
No. of Cylinder : 4
Displacement : 3192 cc
Rated RPM : 2100
Max. Torque : 21.4 kg-m
Engine HP : 56
PTO HP : 52
SFC : 176 gm/BHP Hr.
Air Cleaner
Dry Air Cleaner with clog indicator
Transmission
8 Forward + 8 Reverse, Mechanical Constant Mesh
Speeds
Forward : 3.16 to 32.01 kmph
Reverse : 4.79 to 13.71 kmph
Clutch
Dual Clutch : 11” x 11”
PTO
Reverse PTO, 6 splines
Brakes
Oil immersed brake with auto swing arrester
Harvester Tyre Size
Drive Wheel : 16.9 x 28 (12 PR)
Steering Wheel : 6.5 x 20 (8 PR)
Cutter Bar Assembly
Effective Width : 3600 mm
Working Width : 3900 mm
No. of Blades : 49
Cutting Platform
3280 mm (Dia.) x 3840 mm (Width)
No. of Scoops : 16
Blower
Dia. : 550 mm
Width : 1100 mm
No. of Blades : 4
Separating Mechanism
Sleeves : Adjustable Open Lip
No. of Walkers : 5
3
3
3
3
3
3
Low fuel consumption.
Conveniently placed directional control levers for lifting and lowering of cutter bar.
Cutter bar augur with prong for effective crop feeding.
Sturdy and long life reel design.
Chain drive system to increase transmission efficiency.
Multiple usage when tractor is dismounted from harvester combine during off season.
11
Post Hole Digger
Mahindra offers Post Hole Digger, it is a digging tool for a wide var iety of applications - like fencing/
tree plantations. Auger size can be decided as per the required hole size. The digging gets done at a faster pace and neater way as compared to manual digging. It is fastest method to dig up hole as it is driven by PTO.
Technical Data
Auger Length : 30"
Auger Flight Thickness : 1/4"
Auger Pipe : 2 ½" ID
Auger Teeth : Forged, Individually Replaceable
40 degree angle installed on flat side
50 degree angle installed on angled side
Number of Teeth : 6" - 2 teeth, 9" & 12" - 4 teeth
Pilot : Cast steel, 3 drill points
Driveline : Cat. II Shearbolt
Maximum Operating PTO Speed : 300 RPM
3-Point Hitch Cat. : Cat. I
Boom Tube : 2 7/8" O.D.
Yoke Tube : 2 7/8" O.D.
Options and Accessories
Auger Sizes (Options) : 6", 9" or 12"
Auger Extensions (Accessories) : 7" & 14" Extensions Available
Cat. III Torque Limiter Driveline : Not Available
Hydraulic Down Pressure Kit : Available
Storage Stand : Available
Features
3
3
3
3
3
It can dig up to diameter of 6", 9", 12", 18",24”.
Shorter yoke and boom tubing allows Post Hole Digger to be used on sub compact utility tractors also.
Replaceable hardened steel points on auger. Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged.
3 Point hook up Design makes it possible to back up to the Post Hole Digger with a tractor and hook up and disconnect with ease and safety.
Storage capabilities Digger stand allows Post Hole Digger to be stored safely and efficiently. The stand allows easy hook up in future use.
12
Front End Loader
AppliTrac offers high quality, custom built front loaders. These are great tractor front end loaders. These loaders
are easy for installation and removal, and simplicity of use. Strongest bucket and superior lift capabilities are the key characteristic of Mahindra front end loaders.
Technical Data
Features
3
3
3
Loader attachment is designed for quick & easy detachment from the tractor, it saves changeover time and increase productivity.
Hardened pivoting pins with easy accessible greasing points, which ensures easy maintenance, low cost and longer life of the pins.
Superior quality cylinder and hoses, ensures failure free performance.
Model FEL-60
Max. Height to Hinge Pin 3385 mm
Max. Dump Height 2520 mm
Max. Dig Depth 80 mm
Reach at Ground 1950 mm
Reach at Max. Dump Height 850 mm
Wheel Base 2140 mm
Max Roll Back Angle at Ground 45 degree
Max Bump Angle 45 degree
Bucket Width 2000 mm
Payload Capacity 900 kg
Bucket Rated Capacity 0.67 cu.m
Compatible Tractor Arjun 605 DI (CE)
13
Laser Leveler
Laser land leveling is leveling the field within certain degree of desired slope using a guided laser beam throughout the
field.
Laser leveling smooths the land surface at an accuracy of ± 2cm from its average elevation using laser equipped drag buckets.
Soil is moved by cutting / filling to create the desired slope / level.
Technical Data
Laser transmitter Control panelLaser receiver
Laser leveler – Components
Leveling Bucket
Compatible Tractor Models :
Arjun Ultra-1 605 DI (All variants), Arjun Ultra-1 555 DI (All variants) and Sarpanch 595 DI
Features
3
3
3
3
3
A precisely leveled surface leads to uniform soil moisture distribution, resulting in good germination, enhanced input use efficiency and improved crop stand & yield.
Improved irrigation efficiency through better irrigation & run-off control resulting in lower potential for nutrient loss.
Uniformity in placement of seedlings, helping to achieve higher yields.
Improved water coverage reducing weeds, hence less time for crop weeding.
Facilitates movement of agricultural machinery. throughout the field as number of bunds are reduced.
Laser Type : 670 nm Class II
Accuracy : ±1.5 mm per 30 m
Operating Range : 1000 m Dia.
Slope Control : ±10% Single Axis
Scrapper Bucket
Drag Bucket : 1980 mm x 610 mm x 812 mm
Alloy Steel Scrapper Blade
2MT Double Acting Hydraulic Cylinder
12
Front End Loader
AppliTrac offers high quality, custom built front loaders. These are great tractor front end loaders. These loaders
are easy for installation and removal, and simplicity of use. Strongest bucket and superior lift capabilities are the key characteristic of Mahindra front end loaders.
Technical Data
Features
3
3
3
Loader attachment is designed for quick & easy detachment from the tractor, it saves changeover time and increase productivity.
Hardened pivoting pins with easy accessible greasing points, which ensures easy maintenance, low cost and longer life of the pins.
Superior quality cylinder and hoses, ensures failure free performance.
Model FEL-60
Max. Height to Hinge Pin 3385 mm
Max. Dump Height 2520 mm
Max. Dig Depth 80 mm
Reach at Ground 1950 mm
Reach at Max. Dump Height 850 mm
Wheel Base 2140 mm
Max Roll Back Angle at Ground 45 degree
Max Bump Angle 45 degree
Bucket Width 2000 mm
Payload Capacity 900 kg
Bucket Rated Capacity 0.67 cu.m
Compatible Tractor Arjun 605 DI (CE)
13
Laser Leveler
Laser land leveling is leveling the field within certain degree of desired slope using a guided laser beam throughout the
field.
Laser leveling smooths the land surface at an accuracy of ± 2cm from its average elevation using laser equipped drag buckets.
Soil is moved by cutting / filling to create the desired slope / level.
Technical Data
Laser transmitter Control panelLaser receiver
Laser leveler – Components
Leveling Bucket
Compatible Tractor Models :
Arjun Ultra-1 605 DI (All variants), Arjun Ultra-1 555 DI (All variants) and Sarpanch 595 DI
Features
3
3
3
3
3
A precisely leveled surface leads to uniform soil moisture distribution, resulting in good germination, enhanced input use efficiency and improved crop stand & yield.
Improved irrigation efficiency through better irrigation & run-off control resulting in lower potential for nutrient loss.
Uniformity in placement of seedlings, helping to achieve higher yields.
Improved water coverage reducing weeds, hence less time for crop weeding.
Facilitates movement of agricultural machinery. throughout the field as number of bunds are reduced.
Laser Type : 670 nm Class II
Accuracy : ±1.5 mm per 30 m
Operating Range : 1000 m Dia.
Slope Control : ±10% Single Axis
Scrapper Bucket
Drag Bucket : 1980 mm x 610 mm x 812 mm
Alloy Steel Scrapper Blade
2MT Double Acting Hydraulic Cylinder
14
AppliTrac offers excellent quality Hydraulic Reversible plough which is 100% German technology known
for their jerk free smooth operation, lesser number of moving parts and low maintenance. The Hydraulic Reversible Plough is remarkable for its heavy duty function. It is operated with the Hydraulic force making the equipment highly effective for the preparation of farming land. It is available in 2 sizes - 2 bottom & 3 bottom.
3
3
3
Hydraulic turn over device with double acting ram for safe and quick turn over action.
Specially heat treated mould board.
Adjustable plough body for pitch providing good penetration into the soil.
Hydraulic Reversible Plough
Technical Data
Features
15
Disc Plough
The disc plough is designed to work in all type of soil for basic functions such as soil breaking, soil raising, soil
turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily in rocky and rooted areas. It is specially useful in hard and dry trashy land conditions and in soils where scouring is a major problem.
3
3
3
3
3
3
3
3
3
3
Saves approx 35% time as compared to Mould Board Plough.
Adequate under-frame and bottom-to-bottom clearance to cope with trashy conditions.
Variable disc tilt angle with four stages for various types of soils.
Adjustable spring loaded furrow wheel to take care of the side draft.
Each disc has a scrapper blade to scrap the soil from the disc.
Construction of disc plough frame ensures perfect alignment of stub-beams carrying the Disc Bottoms providing meticulous perfect finish.
Each disc is mounted on hub bearing for free rotation as it cuts through the soil.
This rotation also provides self effect so that it wears out equally without breaking.
Mahindra disc ploughs can handle the toughest ploughing jobs.
Ideal for hard ground and soil with large roots & other obstructions.
Technical Data
Features
Parameter 2 furrow 3 furrow
Size 2x12” 2x14” 2x16” 3x12” 3x14” 3x16”
Working Depth 204 - 305 mm
Ground Clearance 700 mm
Inter Body Clearance 850 mm
Weight 470 kg 620 kg
Tractor HP 40-45 45-50 50-55 55-60 60-65 60-65
Parameter DP - 2/26 DP - 3/26
No. of discs 2 3
Overall Length (mm) 1600 1600
Overall Width (mm) 1321 1321
Overall Height (mm) 1270 1270
Dia. Of disc (mm) 660 660
Depth of cut (mm) 254 254
Total weight (kg) 331 385
Compatible Tractor 30 - 40 HP 40 - 50 HP
14
AppliTrac offers excellent quality Hydraulic Reversible plough which is 100% German technology known
for their jerk free smooth operation, lesser number of moving parts and low maintenance. The Hydraulic Reversible Plough is remarkable for its heavy duty function. It is operated with the Hydraulic force making the equipment highly effective for the preparation of farming land. It is available in 2 sizes - 2 bottom & 3 bottom.
3
3
3
Hydraulic turn over device with double acting ram for safe and quick turn over action.
Specially heat treated mould board.
Adjustable plough body for pitch providing good penetration into the soil.
Hydraulic Reversible Plough
Technical Data
Features
15
Disc Plough
The disc plough is designed to work in all type of soil for basic functions such as soil breaking, soil raising, soil
turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily in rocky and rooted areas. It is specially useful in hard and dry trashy land conditions and in soils where scouring is a major problem.
3
3
3
3
3
3
3
3
3
3
Saves approx 35% time as compared to Mould Board Plough.
Adequate under-frame and bottom-to-bottom clearance to cope with trashy conditions.
Variable disc tilt angle with four stages for various types of soils.
Adjustable spring loaded furrow wheel to take care of the side draft.
Each disc has a scrapper blade to scrap the soil from the disc.
Construction of disc plough frame ensures perfect alignment of stub-beams carrying the Disc Bottoms providing meticulous perfect finish.
Each disc is mounted on hub bearing for free rotation as it cuts through the soil.
This rotation also provides self effect so that it wears out equally without breaking.
Mahindra disc ploughs can handle the toughest ploughing jobs.
Ideal for hard ground and soil with large roots & other obstructions.
Technical Data
Features
Parameter 2 furrow 3 furrow
Size 2x12” 2x14” 2x16” 3x12” 3x14” 3x16”
Working Depth 204 - 305 mm
Ground Clearance 700 mm
Inter Body Clearance 850 mm
Weight 470 kg 620 kg
Tractor HP 40-45 45-50 50-55 55-60 60-65 60-65
Parameter DP - 2/26 DP - 3/26
No. of discs 2 3
Overall Length (mm) 1600 1600
Overall Width (mm) 1321 1321
Overall Height (mm) 1270 1270
Dia. Of disc (mm) 660 660
Depth of cut (mm) 254 254
Total weight (kg) 331 385
Compatible Tractor 30 - 40 HP 40 - 50 HP
16
Mounted Offset Disc Harrow
Mahindra Mounted Offset Disc Harrow is tractor operated implement which trails behind the tractor and effectively
breaks up c lods wi th deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried. Provision of handle screw enables for the adjustment of inclination required for the disc penetration depth hence suitable for different cutting depths for varying soil conditions. Heavy duty sturdy mainframe with heavy duty spools and hardened discs ensure proper center weight and longer life.
3
3
3
3
3
Available in a combination of Plain and notched discs (optional-All plain discs).
Hardened sharp edged discs to ensure proper cutting of roots and clods.
Easy to mount on tractor with three point linkages and easy to operate.
A compact unit for easy maneuverability into corners or smaller plots.
Presence of spring loaded head stock brace to ensure flexibility to equipment over uneven ground.
Technical Data
Features
17
Rotavator
AppliTrac offers a wide range of rotavators:
Regular model (working width ranging from 1.0m to 2.0m)
Potato Special rotavators (working width ranging from 1.25m to 2.25m)
3
3
3
3
3
11/2’’ chain and bigger width sprockets for longer life and better performance.
Rotor shaft is supported on heavy duty bearings protected by double lip seal to work even in wet fields.
The production gear box of regular rotavators has 6 module bevel gears.
Potato special rotavators have 8 module so that they have longer life under toughest conditions.
Spring loaded adjustable trail board for simultaneous soil levelling.
Technical Data
Features
Model Working Type of No. of Type of WeightWidth Blade Blades Drive (kg)
M100L-S 1.0 m L-Type 24 Chain 305
M125J-S 1.25 m L-Type 30 Chain / Gear 335
M125L 1.25 m L-Type 30 Chain / Gear 365
M150L 1.5 m L-Type 36 Chain / Gear 365
M180L 1.8 m L-Type 42 Chain / Gear 410
M210L 2.0 m L-Type 48 Chain / Gear 440
M225L 2.25 m L-Type 54 Chain / Gear 440
Parameter MDH 1222 MDH 1422
No. of discs 6 x 6 7 x 7
Overall Length (mm) 2000 2045
Overall Width (mm) 1480 1753
Overall Height (mm) 1235 1314
Working Width (mm) 1420 1575
Total No. of discs 12 14
Dia. of Disc (mm) 559 559
Total weight (kg) 375 400
Compatible Tractor 30 - 40 HP 40 - 50 HP
16
Mounted Offset Disc Harrow
Mahindra Mounted Offset Disc Harrow is tractor operated implement which trails behind the tractor and effectively
breaks up c lods wi th deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried. Provision of handle screw enables for the adjustment of inclination required for the disc penetration depth hence suitable for different cutting depths for varying soil conditions. Heavy duty sturdy mainframe with heavy duty spools and hardened discs ensure proper center weight and longer life.
3
3
3
3
3
Available in a combination of Plain and notched discs (optional-All plain discs).
Hardened sharp edged discs to ensure proper cutting of roots and clods.
Easy to mount on tractor with three point linkages and easy to operate.
A compact unit for easy maneuverability into corners or smaller plots.
Presence of spring loaded head stock brace to ensure flexibility to equipment over uneven ground.
Technical Data
Features
17
Rotavator
AppliTrac offers a wide range of rotavators:
Regular model (working width ranging from 1.0m to 2.0m)
Potato Special rotavators (working width ranging from 1.25m to 2.25m)
3
3
3
3
3
11/2’’ chain and bigger width sprockets for longer life and better performance.
Rotor shaft is supported on heavy duty bearings protected by double lip seal to work even in wet fields.
The production gear box of regular rotavators has 6 module bevel gears.
Potato special rotavators have 8 module so that they have longer life under toughest conditions.
Spring loaded adjustable trail board for simultaneous soil levelling.
Technical Data
Features
Model Working Type of No. of Type of WeightWidth Blade Blades Drive (kg)
M100L-S 1.0 m L-Type 24 Chain 305
M125J-S 1.25 m L-Type 30 Chain / Gear 335
M125L 1.25 m L-Type 30 Chain / Gear 365
M150L 1.5 m L-Type 36 Chain / Gear 365
M180L 1.8 m L-Type 42 Chain / Gear 410
M210L 2.0 m L-Type 48 Chain / Gear 440
M225L 2.25 m L-Type 54 Chain / Gear 440
Parameter MDH 1222 MDH 1422
No. of discs 6 x 6 7 x 7
Overall Length (mm) 2000 2045
Overall Width (mm) 1480 1753
Overall Height (mm) 1235 1314
Working Width (mm) 1420 1575
Total No. of discs 12 14
Dia. of Disc (mm) 559 559
Total weight (kg) 375 400
Compatible Tractor 30 - 40 HP 40 - 50 HP
19
Cultivator (Tiller)
18
Cultivator (Tiller)
Mah i nd ra Cu l t i va t o r i s designed to destroy weeds with shallow roots and to break up surface soil near plants for
optimum aeration. This Cultivator also eliminates habitat for mice, other rodents, insects, etc., thus enabling the farmer to obtain maximum yield. It is also used in mixing compost and fertilizer into the soil. AppliTrac offers spring loaded type and rigid tyne type cultivators.
3
3
3
3
3
More penetration & better performance as compared to local make.
Provides the convenience of ‘change in angle’ which helps in overcoming obstacles.
Mahindra rigid tyne cultivators are provided with Heavy-duty tynes for positive penetration.
Operates like a light chisel plough.
Its strong and robust tyne is designed for breaking-up hard land and mixing crop residue.
Rigid Tyne CultivatorMahindra Rigid Tyne Cultivator is designed to withstand tough work. The Cultivator has heavy-duty shanks for positive
penetration. It breaks up hard top soil, uproots stubbles to leave the ground perfectly worked. With the spacing adjustments of tyne on the frame it can be used for multiple no. of applications and it is more useful for paddy cultivation that requires shallow ploughing on hard, clay and cracked up soil.
3
3
3
3
These are suitable for operation under varying soil conditions.
Mahindra Spring loaded cultivators are simple in design and quick to adjust, thus saving time and offering complete accuracy of work.
Its tynes are made of quality alloy steel components for longer life and are loaded with superior quality springs.
The spring loaded tynes easily ride over obstruction and eliminate slippage of tractor.
Spring Loaded Time CultivatorMahindra Spring Loaded Cultivator is more subtle in design. It has been designed to deliver sturdy performance
in varying soil conditions. Heavy duty channel mainframe and tyne assembly resist heavy bending strains. Heavy duty dual springs retain their strength for longer life and ensure safety of shovels from heavy obstacles. It is distinguished by longer frame to facilitate wider spacing of tynes. This can be used for loosening and aerating soil. It prepares seed beds quickly and economically.
Features
Technical Data
Technical Data
Features
Parameter RTG 3209 RTG 3211
No. of Tynes 9 11
Overall Length (mm) 2000 2451
Overall Width (mm) 850 850
Overall Height (mm) 1010 1010
Under frame Clearance (mm) 431 431
Total weight (kg) 250 300
Compatible Tractor 30 - 40 HP 40 - 45 HP
Parameter HST 2509 HST 2511
No. of Tynes 9 11
Overall Length (mm) 2000 2451
Overall Width (mm) 870 870
Overall Height (mm) 1030 1030
Under frame Clearance (mm) 552 552
Fore & Aft Clearance (mm) 357 357
Total weight (kg) 270 324
Compatible Tractor 25 - 30 HP 30 - 35 HP
19
Cultivator (Tiller)
18
Cultivator (Tiller)
Mah i nd ra Cu l t i va t o r i s designed to destroy weeds with shallow roots and to break up surface soil near plants for
optimum aeration. This Cultivator also eliminates habitat for mice, other rodents, insects, etc., thus enabling the farmer to obtain maximum yield. It is also used in mixing compost and fertilizer into the soil. AppliTrac offers spring loaded type and rigid tyne type cultivators.
3
3
3
3
3
More penetration & better performance as compared to local make.
Provides the convenience of ‘change in angle’ which helps in overcoming obstacles.
Mahindra rigid tyne cultivators are provided with Heavy-duty tynes for positive penetration.
Operates like a light chisel plough.
Its strong and robust tyne is designed for breaking-up hard land and mixing crop residue.
Rigid Tyne CultivatorMahindra Rigid Tyne Cultivator is designed to withstand tough work. The Cultivator has heavy-duty shanks for positive
penetration. It breaks up hard top soil, uproots stubbles to leave the ground perfectly worked. With the spacing adjustments of tyne on the frame it can be used for multiple no. of applications and it is more useful for paddy cultivation that requires shallow ploughing on hard, clay and cracked up soil.
3
3
3
3
These are suitable for operation under varying soil conditions.
Mahindra Spring loaded cultivators are simple in design and quick to adjust, thus saving time and offering complete accuracy of work.
Its tynes are made of quality alloy steel components for longer life and are loaded with superior quality springs.
The spring loaded tynes easily ride over obstruction and eliminate slippage of tractor.
Spring Loaded Time CultivatorMahindra Spring Loaded Cultivator is more subtle in design. It has been designed to deliver sturdy performance
in varying soil conditions. Heavy duty channel mainframe and tyne assembly resist heavy bending strains. Heavy duty dual springs retain their strength for longer life and ensure safety of shovels from heavy obstacles. It is distinguished by longer frame to facilitate wider spacing of tynes. This can be used for loosening and aerating soil. It prepares seed beds quickly and economically.
Features
Technical Data
Technical Data
Features
Parameter RTG 3209 RTG 3211
No. of Tynes 9 11
Overall Length (mm) 2000 2451
Overall Width (mm) 850 850
Overall Height (mm) 1010 1010
Under frame Clearance (mm) 431 431
Total weight (kg) 250 300
Compatible Tractor 30 - 40 HP 40 - 45 HP
Parameter HST 2509 HST 2511
No. of Tynes 9 11
Overall Length (mm) 2000 2451
Overall Width (mm) 870 870
Overall Height (mm) 1030 1030
Under frame Clearance (mm) 552 552
Fore & Aft Clearance (mm) 357 357
Total weight (kg) 270 324
Compatible Tractor 25 - 30 HP 30 - 35 HP
20
Forth Coming Farm Solutions
3
3
3
3
Seed Drill
Potato Planter
Sprayer
3-Way Tipping Trailer