11H12E 12G 13E14G
14J15FX21C 21D21J 22E 24F24G
25FX26D26E26FX 32E42D42F42G45H 55D 62G65G75E
SNRHHc, Lc
Lc, TcDc, Fc, HcCFK1HF, HHc, Lc
Dc, Fc, HcBc, FcDc, Fc, HcBc, DcHFHPREK1, RDc, HcN
433, 634431, 632433, 632431, 630433
433431429, 630429, 630433, 634429, 630431, 632433
433431431431431, 632429, 630431, 632431, 632433, 634429, 630433, 634433, 634429, 630
VF-L, 334VF-M, 332VF-L, 334VF-S, 330VF-L, 334
VF-L, 334VF-M, 332VF-S, 330VF-S, 330VF-L, 334VF-S, 330VF-M, 332VF-L, 334
VF-L, 334 VF-S, 330VF-M, 332VF-M, 332VF-M, 332VF-S, 330VF-M, 332VF-M, 332VF-L, 334VF-S, 330VF-L, 334VF-L, 334VF-S, 330
33M31M33M31M33M
33M31M29M29M33M29M31M33M
33M31M31M31M31M29M31M31M33M29M33M33M29M
VF-L, 34MVF-M, 32MVF-L, 34MVF-S, 30MVF-L, 34M
VF-L, 34MVF-M, 32MVF-S, 30MVF-S, 30MVF-L, 34MVF-S, 30MVF-M, 32MVF-L, 34M
VF-L, 34MVF-S, 30MVF-M, 32MVF-M, 32MVF-M, 32MVF-S, 30MVF-M, 32MVF-M, 32MVF-L, 34MVF-S, 30MVF-L, 34MVF-L, 34MVF-S, 30M
c36, c36R, c36XL, c36XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc31, c34XL, c34XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc36, c36R, c36XL, c36XRc34, c34R, c34XL, c34XRc31, c34XL, c34XRc31, c34XL, c34XRc36, c36R, c36XL, c36XRc31, c34XL, c34XRc34, c34R, c34XL, c34XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc34, c34R, c34XL, c34XRc31c34, c34R, c34XL, c34XRc31c34, c34R, c34XL, c34XRc31, c34XL, c34XRc34, c34R, c34XL, c34XRc34, c34R, c34XL, c34XRc36, c36R, c36XL, c36XRc31, c34XL, c34XRc36, c36R, c36XL, c36XR
c31, c34XL, c34XR
Articulates with Anterior Lower
0˚ 10˚ 20˚ 33˚ 40˚
Anterior UpperMould No.
TruExpression® Posteriors
Non-Anatomical AnatomicalSemi-Anatomical
TruExpression® Anteriors
NOTE: Face shapes relate to anteriors only.
Square Square Tapering Tapering Ovoid
Half width of set(mm)
Depth of first molar(mm)
Highly Characterized Posteriorsc31c34
c34XR
c31c34
c34XR
29.7532.7535.0
28.531.7532.5
8.39.39.3
9.810.810.8
LowerUpper LowerUpper LowerUpper
Denture TeethNS
12E11H
HK1
22E21J
PR
42G45H
K1, R62G
LowerUpper LowerUpper LowerUpper LowerUpper
Most Popular Bioform® Style Moulds
Veraform PosteriorsVF-SVF-MVF-L
VF-SVF-MVF-L
10˚10˚10˚
Upper LowerAngle
Most Popular Veraform™ Moulds
Most Popular Highly Characterized MouldsSquare
Mould #
Square Tapering Ovoid
Highly Characterized Anteriors Hc, Lc14G Hc, Lc24G Dc, Hc65GLowerUpper LowerUpper LowerUpper
Combination TableSelect upper anterior mould form, and use table to determine recommended lower anterior and posterior options.
TruExpression®
Mould Chart – Custom Deluxe Denture TeethFor dental professionals and laboratories
© 2018 Dentsply Sirona Inc. All rights reserved. Form No. 4408-D Rev. 6 (05/2018)
Dentsply Sirona | 570 West College Avenue | York, PA 17401 | 800-243-1942 | dentsplysirona.com
This mould chart will guide you through the selection of the ideal
tooth solution for your patient, based upon the ATS philosophy.
The harmony of anatomical form and function is provided in this
mould chart through seven anterior tooth facial forms, and five
functional occlusal angle families.
The ATS Mould Classification
Using the Dentsply Sirona MM Ruler (Part #3496), measure the width of the upper six anterior teeth on the curve, from distal to distal. The measurement will fall into one of the ranges identified with the letters B through J.The letter selected is the third character of the mould identification number.
B. less than 44.00 mmC. 44.00 to 45.50 mmD. 45.50 to 48.00 mmE. 48.00 to 49.00 mmF/X. 49.00 to 51.50 mmG. 51.50 to 54.00 mmH. 54.00 to 56.00 mmJ. 56.00 mm or greater Some moulds may
vary from this standard. Please consult mould chart dimensions.
Steps to identify and select anterior moulds
Using the classification form listed above, select the number from 1 to 7 that best represents the patient’s facial form. The number selected is the first character of the mould identification number, located in the upper left corner of the tooth card.
1. Square2. Square Tapering3. Square Ovoid4. Tapering5. Tapering Ovoid 6. Ovoid7. Square Tapering Ovoid
First number: Classification
Second number: Proportion & Contour
Letter Step: Width of Upper Six Anterior Teeth on Curve
Square Square Tapering
Tapering TaperingOvoid
SquareOvoid
Ovoid Square Tapering
Ovoid
Using a flat device such as the Dentsply Sirona Tooth Indicator (#98981), select the number from 1 to 6that represents both the proportion of the tooth(long, medium or short) as well as the facial contour (straight or curved).
The number selected is the second character of the mould identification number.
Proportion of the Tooth1. Long2. Medium3. Short4. Long5. Medium 6. Short
FacialContourStraightStraightStraightCurvedCurved Curved
Curved Straight
02 03
A legacy from which to learn, the Anatoform and Trubyte Systems revolutionized prosthetic dentistry over 100 year ago. In 1913, the Dentists Supply Company of New York, known today as Dentsply Sirona, brought together the two leading pioneers of prosthetic dentistry, Dr. Leon Williams and Dr. Alfred Gysi. Dr. Williams discovered and developed the harmony between facial forms and anterior teeth. Dr. Gysi pioneered posterior tooth forms and denture occlusion in harmony with the temporomandibular joint. The collaboration of Dr. Williams and Dr. Gysi resulted in the creation of the Anatoform technique in Europe and the Trubyte technique in America. The system developed by these pioneers continues to influence prosthetic dentistry through Dentsply Sirona’s new Anatoform Trubyte System (ATS).
From the foundational work of Dr. Williams and Dr. Gysi, Dentsply Sirona continues to build upon the harmonious anatomical tooth designs and time tested functional performance of the ATS. Dentsply Sirona is developing new materials and new technologies that are leading prosthetic dentistry to better, faster, safer solutions for technicians, clinicians, and patients.
Anatoform Trubyte® System (ATS)
7 Basic Facial Forms:
Square Tapering Square Ovoid Tapering
Tapering Ovoid Ovoid Square TaperingOvoid
Square
GoodRidge
DeepCusp
Anatomical
AverageRidge
PoorRidge
ModifiedCusp
FlatPlane
Semi-AnatomicalNon-Anatomical
1.
2.
3.
TruExpression® Denture Teeth
TruExpression® – Bioform® Style and Highly Characterized Moulds
Choosing the right tooth for a patient can be diffi cult for the clinician or laboratory technician. Dentsply Sirona makes it easy! All TruExpression teeth have been harmonized to fit within the trusted ATS tooth indicator system – a method of correlating the patient’s facial shape, to the physiology of their natural dentition. Refer to page 2 & 3.
TruExpression denture teeth are classified into two distinct mould families: Bioform Style and Highly Characterized (Hc).
TruExpression Veraform™ Posterior Teeth
We Call It: Custom Deluxe!
Today’s denture market is complex and demanding. Patients and dentists require options to address multiple patient needs for partial, full, and implant supported dentures. TruExpression offers a harmony of “True-to-Life” shade blending and durable materials. For the patient seeking the next step in improved dental appearance and functional durability.
04 05
Bioform Style
Posterior
Highly Characterized
Anterior · Traditional teardrop shaped moulds
· Bioform mould classification by face shape
· Designed to duplicate, natural teeth
Posterior · Easy to set-up· Multiple cusp inclination angles
Posterior · Digitally designed anatomy· Enhancement of natural details· Deep occlusal angles· Wide occlusal platforms
Anterior · Long cervical/neck · Broader body· Reduced interdental papilla
Posterior · Wide food platforms · 40˚ cusps· Long mould forms· Characterized occlusal details
MXLVariegatedShadeBlend
MXLVariegatedShadeBlend
MXLVariegatedShadeBlend
Veraform VariegatedShadeBlend
Highly Wear-Resistant MaterialTruExpression is made from a multi-cross linked polymer known as MXL, allowing TruExpression teeth to wear gradually like natural dentition. The TruExpression denture teeth MXL material resists wear and maintains the denture teeth look and function.
Neck / Cervical
Enamel
Incisal
TruExpression Teeth for:
Veraform
Bioform
Highly Characterized
Full Denture
Partial Denture
Implant Supported
Denture
X
X
X
X
X
X
X
X
X
06 07
SquareMould No.
(Lower Articulation)
Square TaperingMould No.
(Lower Articulation) Square Tapering
Mould No.(Lower
Articulation)
11H TruExpression S
9.35 50.50
11.6
0
54.50
12E TruExpression N
45.50
50.00
10.6
0
8.50
12G TruExpression R
10.6
0
9.15 49.00
53.00
13E TruExpression H
44.00
47.50
9.30
8.10
14G TruExpression Hc LcHc
48.00
55.75
10.7
0
8.60
14J TruExpression Hc TcLc11
.60
50.50
57.50
9.50
21C TruExpression C
42.00
45.50
10.0
0
7.70
21D TruExpression F
10.5
0
44.00
47.00
8.05
21J TruExpression K1
54.50
58.00
12.4
0
10.20
22E TruExpression H
45.00
49.00
10.7
5
8.50
25FX TruExpression Hc HcFcDc
10.3
0
8.40 46.25
53.50
26FX TruExpression Hc DcBc
9.50
45.50
53.00
8.00
Square OvoidMould No.
(Lower Articulation)
32E TruExpression H
10.0
0
45.00
49.00
8.20
TaperingMould No.
(Lower Articulation)
42D TruExpression F
10.2
5
43.50
48.00
8.00
42F TruExpression H
10.5
0
46.508.45
50.00
42G TruExpression P
10.4
0
48.00
52.00
8.70
45H TruExpression R
11.2
5
49.50
54.00
8.85
TruExpression® Anteriors UpperAvailable in 16-shades (A1-D4) and 2 bleach shades.
26E TruExpression Hc HcFcDc
44.00
52.75
10.0
0
8.10
15FX TruExpression Hc HcFc
46.25
55.75
10.2
0
8.40
Dc
KEY UPPER ANTERIOR
47.50/44.00
SUGGESTED LOWERS13E H
Curve/Straight
ARTICULATION
24F TruExpression H
12.0
0
44.50
48.00
8.45
F
24G TruExpression Hc Lc
11.0
0
8.70 47.50
55.50Hc
26D TruExpression Hc Fc
43.00
52.00
10.0
0
7.80
Bc
75E TruExpression N
65G TruExpression Hc HcDc
62G TruExpression RK1
11.9
0
48.509.20
52.50
11.3
0
8.10 46.00
55.00
55D TruExpression E
10.2
5
8.2543.50
47.50
Tapering OvoidMould No.
(Lower Articulation)
OvoidMould No.
(Lower Articulation)
Square Tapering Ovoid
Mould No.(Lower
Articulation)11
.00
45.508.35
49.50
Hc TruExpression Hc
9.40
41.50
36.005.30
Lc TruExpression Hc
10.10
6.00
46.00
37.25
Tc TruExpression Hc
10.9
0
44.50
36.755.90
C TruExpression
31.50
35.00
9.00
4.90
E TruExpression
33.50
38.00
9.40
4.95
F TruExpression
32.00
36.50
8.85
4.95
H TruExpression
32.00
36.50
9.10
4.90
K1 TruExpression
38.50
43.50
11.8
5
5.90
N TruExpression
9.10
35.50
38.00
5.20
R TruExpression
9.25
40.50
36.005.20
S TruExpression
9.65
38.505.70
40.00
Bc TruExpression Hc
8.10
32.004.80
40.00
Dc TruExpression Hc
8.40
5.20 34.75
42.50
Fc TruExpression Hc
9.10
43.50
34.755.10
P TruExpression
35.50
39.50
8.75
5.40
TruExpression® Anteriors LowerAvailable in 16 shades (A1-D4) and 2 bleach shades.
08 09
All dimensions in mm.Images scaled to size.
Y
X
U
L
VF-M TruExpression
VF-S TruExpression
X = 30.0 U = 8.50
Y = 32.0
L = 9.00
VF-M TruExpression
U = 8.50L = 9.00
VF-L TruExpression
10 11
TruExpression Veraform™ Posterior Teeth
Available in 16 shades (A1-D4) and 2 bleach shades.For full, partial and implant supported dentures.
TruExpression Veraform™ 10° Posteriors
Designed to mimic natural dentition, even at 10˚occlusal angle.
Occlusal anatomy delivers enhancement of natural details and features, while maintaining the same Dentsply Sirona ease of set-up.
Wide food platform permits efficient mastication.
VF-L TruExpression
VF-S TruExpression
All dimensions in mm.Images scaled to size.
TruExpression Veraform™ 33° Posteriors
10˚ and 33˚ cusp angles allow for the selection of age appropriate aesthetics.
No grind design. The availability of both 10˚ and 33˚ occlusal angles minimizes your need to adjust the cusp height for proper set-up and supports natural jaw movement for the patient.
Deeper occlusal angles provide easy set-up against natural dentition - perfect for partial denture fabrication.
X = The average width of a 1x4 set of upper posteriors Y = The average width of a 1x4 set of lower posteriors U = The average depth of the upper left first molarL = The average depth of the lower left first molar
X = 32.0
Y = 34.0
X = 34.0
Y = 36.0
U = 8.50L = 9.00
X = 30.00
Y = 32.00
U = 8.50L = 9.00
X = 32.00
Y = 34.50
U = 9.00L = 9.25
U = 8.50L = 9.00
X = 34.00
Y = 36.50
431 TruExpression
U = 8.25L = 8.00
X = 31.00
Y = 34.50
429 TruExpression
X = 29.00
Y = 32.50
U = 7.50L = 8.00
433 TruExpression
U = 9.00L = 9.00
X = 33.00
Y = 35.50
630 TruExpression
X = 30.0 U = 8.80
Y = 32.0
L = 8.80
632 TruExpression
X = 32.0 U = 9.40
Y = 34.0
L = 9.40
634 TruExpression
X = 34.0 U = 9.90
Y = 36.0
L = 9.90
12 13
TruExpression® Posterior TeethAvailable in 16 shades (A1-D4) and 2 bleach shades.
Y
X
U
L
X = The average width of a 1x4 set of upper posteriors Y = The average width of a 1x4 set of lower posteriors U = The average depth of the upper left first molarL = The average depth of the lower left first molar
TruExpression 0° Posteriors
332 TruExpression 31M TruExpression
334 TruExpression 33M TruExpression
330 TruExpression 29M TruExpression
X = 30.00
Y = 32.00
U = 7.70L = 8.25
X = 32.00
Y = 34.50
U = 8.50L = 9.25
X = 34.00
Y = 36.50
U = 9.10L = 9.40
X = 29.00
Y = 32.50
U = 8.25L = 9.10
X = 31.00
Y = 34.50
U = 8.75L = 9.70
X = 33.00
Y = 37.00
U = 9.25L = 10.25
All dimensions in mm.Images scaled to size.
TruExpression 20° PosteriorsTruExpression 10° Posteriors
c31 TruExpression Hc Hc30M TruExpression
X = 30.00
Y = 32.50
L = 8.50U = 8.10
32M TruExpression
X = 32.00 U = 8.50
Y = 34.50
L = 9.00
34M TruExpression
X = 34.00 U = 9.10
Y = 36.50
L = 9.50
X = 28.50 U = 9.80
Y = 29.75
L = 8.30
TruExpression® Posterior TeethAvailable in 16 shades (A1-D4) and 2 bleach shades.
c34 Hc
X = 31.75 U = 10.80
Y = 32.75
L = 9.30
TruExpression Hc
c36 Hc
X = 33.50 U = 11.40
Y = 34.75
L = 9.60
TruExpression Hc
14 15
TruExpression 40° PosteriorsTruExpression 33° Posteriors
All dimensions in mm.Images scaled to size.
XL/XR VariationEnlarged premolars, molar size is unchanged.
R VariationExactly the same dimensions as normal moulds, except for a reduction in the ridge lap.
Hc KEY
R
XR
XL ENLARGEDPREMOLAR
XR/XL Moulds For placement over implant bars, abutments
and wide residual ridges, due to the broadened occlusal surface, which improves
function and stability in the prothesis.
ENLARGEDPREMOLARS/
REDUCEDRIDGE LAP
REDUCEDRIDGE LAP
NORMAL RIDGE LAP
HIGHLY CHARACTERIZED ARTICULATION c34XL Hc
X = 32.50 U = 10.80
Y = 35.00
L = 9.30
TruExpression Hc
c34XR Hc
X = 32.50 U = 10.80
Y = 35.00
L =9.30
TruExpression Hc
c34R Hc
X = 31.75 U = 10.80
Y = 32.75
L = 9.30
TruExpression Hc c36XL Hc
X = 34.50 U = 11.40
Y = 36.25
L = 9.60
TruExpression Hc
c36XR Hc
X = 34.50 U = 11.40
Y = 36.25
L = 9.60
TruExpression Hcc36R Hc
Y = 34.75
L = 9.60X = 33.50 U = 11.40
TruExpression Hc
ISO 22112: 2017. Processing instructions available upon request.
Denture Base
Lucitone® HIPA High Impact Pour Acrylic
The first high impact pour acrylic for improved durability, this pourable denture base material is designed for use in fabrication, repair, rebasing, or relining of full and partial dentures including implant overdentures or other dental appliances.
• 200% stronger than other pourable acrylics1
• Faster processing times of a pour acrylic
• 21% savings in hands-on working time vs. heat cure2
• Color stability
• Accurate fit to model
• Excellent bonding to IPN® teeth
• Available in five shades: Original, Light, Light Reddish
Pink, Original Opaque, Dark Pink
Lucitone FRS Flexible Denture Resin is a temporary thermoplastic injectable resin that offers customizable flexibility, high impact resistance and transparency, delivering aesthetic removable partial dentures and clear or colored clasps.
• Semi-crystalline nylon composition for improved color stability and stain resistance. Provides aesthetics.
• Easy to finish and polish due to the microcrystalline structure. Saves time.
• Monomer – and metal-free. Non-irritating.• Available in original, light pink, light reddish pink,
dark pink and clear shades. Aesthetic shade options.• Clear shade for fabrication of clear clasps, occlusal
splints, and night guards. Offers greater versatility.• Available in three (3) cartridge sizes: small, medium
and large. Adapts to laboratory needs.
Lucitone® FRS® Flexible Dental Resin
Lucitone 199® Denture Base Resin
Lucitone 199 is the premium choice for both tissue and implant-supported full and partial dentures, offering outstanding aesthetics, high impact resistance, and superb flexural strength.
• Industry standard for premium high-impact denture base resins. Trusted and reliable.
• Superior high-impact resistance and flexural strength. Resists breakage.
• Balanced translucency and excellent vein simulation. Delivers aesthetic results.
• Compression packed, injected or microwavable if injected. Adapts to laboratory processes.
• Available in original, light pink, light reddish pink and dark pink shades. Covers patients’ needs.
Vitallium 2000 is a premium partial denture system, featuring two alloy formulations, Vitallium 2000 and Vitallium 2000 Plus, with advanced physical propertiesfor improved handling characteristics. Vitallium alloys are nickel and beryllium-free.
• Superior Strength – The high fracture resistance of Vitallium 2000 alloys enables dental laboratories to fabricate lighter, more refined partials for improved aesthetics and greater patient comfort.
• Predictability and Precise Fit – Vitallium 2000 alloys have a higher elongation value permitting predictable adjustments with unprecedented fracture resistance. Vitallium 2000 alloys adjust like gold with no fear of deformation for a precise fit.
• High Surface Luster – Vitallium alloys maintain a high luster and resist plaque. This ensures that patients can easily and effectively clean their partial dentures.
Vitallium® 2000 and Vitallium® 2000 Plus Alloys
16 17
1. Based on Dentsply Sirona testing. 2. Time savings is based upon hands-on working time. Data on file.
18 19
1. DownloadGo to iTunes or Google Play and download the Lab Smarter App on your iPhone or Android device.
2. Sign-UpComplete the one-time registration and wait for the email confirmation. Sign into the app using your user name and password.
a) If you are a Dentsply Sirona distributor, check the box at the bottom to gain access to the customer management mode.
3. Snap. Tap. SmileNow scan your cabinet and reorder Dentsply Sirona teeth through your preferred dealer.
Take control of your tooth stock in 3 easy steps:1.
Google Play is a trademark of Google Inc.iPhone and iPad are registered trademarks of Apple Inc. App Store is a service mark of Apple Inc.
Scan OrderQuickly scan barcodes in your tooth cabinets to reorder Dentsply Sirona tooth stock with the push of a button.
NotificationReceive exclusive promotions through this portal as well as updates and news. Check back often for the latest notifications.
Order HistoryReview orders submitted through the Lab Smarter® app. See past orders down to the mould and shade. Past orders can be printed for your records.
How it worksStep-by-step instructions for using the app.
Contact my Dentsply Sirona Representative
A digital business card to call, text or email your local Dentsply Sirona sales representative.
Smart Cabinet Technology
Simplify your inventory management. Scan barcode and reorder Dentsply Sirona teeth through yourpreferred distributor on a mobile device. Downloadthe app today.
Lingualized Occlusion is a Set-Up Technique!
Some manufacturers market lingualized occlusion as a card of teeth when it is, in fact, a set-up technique. This simple and predictable occlusal approach, utilizing two points of contact, helps to enhance patient mastication, phonetics and deglutition.
With TruExpression®, laboratories and dentists can work collaboratively to choose the posterior teeth most appropriate for the patient.
Lingualized OcclusionOptions40 /̊20 ,̊ 40 /̊10˚33 /̊20 ,̊ 33 /̊10 ,̊ 33 /̊0˚ 20 /̊10 ,̊ 20 /̊0˚10 /̊0˚
BalancingSide
WorkingSide
CentricWorking/Non-Working
Movement
Mandibular Movement
BalancingSide
WorkingSide
CentricWorking/Non-Working
Movement
Mandibular MovementBalanced OcclusionOptions40 /̊40˚33 /̊33˚ 20 /̊20˚10 /̊10˚0 /̊0˚
TruExpression® Occlusal Options
*The A1-D4 designations correspond to the VITA classical A1-D4® shade guide which is meant to be a guide, not a match. VITA classical A1-D4 is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co.KG
TruExpression® Shade Guide
TruExpression teeth are available in • 16 A1-D4 shades*• 2 bleach shades
Most Popular Shades: A2, A1, A3, A3.5, B1, C1, C2, B2
Shade Guide Ref: 905637