1
Program
American Energy and Manufacturing Competitiveness Summit
December 12, 2013Ronald Reagan International Trade Center1300 Pennsylvania Ave NW Washington, DC 20004
Council on Competitiveness AEMC Summit Program
2
Media PartnerMedia support for this event is provided by Breaking Energy. Breaking Energy provides news, analysis, reference materials and discussions about the day’s energy market trends.
3
Contents
Welcome Letter 4
Agenda 6
Exhibits 10
About the Council on Competitiveness 14
JOIN THE CONVERSATION
Network: Ronald Reagan BuildingUsername: CouncilPassword: 25150
@CompeteNow #2013AEMCSummit
Council on Competitiveness AEMC Summit Program
4
The Council on Competitiveness and the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy (EERE) welcome you to the inaugural American Energy and Manufacturing Competitiveness (AEMC) Summit.
This inaugural AEMC Summit convenes leaders from across America’s vibrant and diverse industrial, academic, national laboratory, labor and government communities to address the most critical challenges and promising opportunities to bolster U.S. competitiveness by strengthening the U.S. energy and manufacturing ecosystems.
And many of these key stakeholders—at all levels, from local to regional to national—have been engaged this year in a robust conversation and dialogue series to distill the salient challenges and opportunities facing America’s manufacturing and energy sectors, and uncover concrete actions and policy solutions to:
• Increase U.S. competitiveness in the production of next–generation, clean energy products by strategically investing in technologies that leverage American competitive advantages and overcome competitive disadvantages.
• Increase U.S. manufacturing competitiveness across the board by increasing energy productivity and strategically investing in technologies and practices that enable U.S. manufacturers to increase their competitiveness through energy efficiency, combined heat and power, and low-cost domestic energy sources.
These goals are a reflection of a critical inflection point in America’s history. The natural gas revolution, as part of a broader, deeper, and more diverse energy portfolio, has created unprecedented energy strength, abundance, and independence—lowering energy costs, boosting the long-term prospects for economic competitiveness, reducing dependence on foreign sources of energy, and offering a bridge to a cleaner and distinctly American energy
Welcome
Welcome
5
future. Concurrently, the nation’s leadership in innovation and research is unparalleled, and America’s strong entrepreneurship and investment ecosystem turbocharges limitless opportunities.
We find ourselves at a unique moment in our energy history with a wide array of clean energy technologies—solar modules, wind turbine blades, plug-in electric vehicle batteries and advanced biofuels, to name a few—now within five to ten years of being directly cost competitive without subsidies.
But America will only capture the promise of this point in time, and the tools and resources available, if the country takes bold, decisive and collective action. Today’s opportunity is to optimize how all of America’s stakeholders in a more energy and manufacturing competitive economy can come together to forge a new era of U.S. technology leadership, create jobs and lead the way to a sustainable, secure and prosperous future.
The inaugural AEMC Summit is the nation’s newest launch pad for common action toward these common goals. With our outstanding lineup of speakers, live demonstrations, and an action-oriented group of more than 600 participants, we are poised for a successful launch of a significant effort. We look forward to working with you in the years to come.
Ms. Deborah L. Wince-Smith President & CEO Council on Competitiveness
Dr. David T. Danielson Assistant Secretary for Energy Efficiency & Renewable Energy U.S. Department of Energy
Council on Competitiveness AEMC Summit Program
6
Agenda
Welcome to the AEMC Summit at the Ronald Reagan International Trade Center. Sessions today will take place in the Auditorium Lobby, Auditorium and Atrium.
Department of Energy (DOE) Side SessionsAs part of the overall Summit, these Side Sessions will offer participants a chance to interact directly with DOE program directors. These special sessions will give participants opportunities to learn about manufacturing activities in technology programs, upcoming R&D areas, the latest director understandings of manufacturing competitiveness, and information on recently awarded grants. Please note that space for the DOE Side Sessions is limited and seating will be based on a first-come, first-serve basis.
MORNING
7:00 Registration and Networking BreakfastLocation: Auditorium Lobby
8:00 The American Advantage—Energy & Manufacturing
Location: Auditorium
This session will describe efforts underway to increase U.S. competitiveness in creating clean energy products and increasing U.S. manufacturing competitiveness by increasing energy productivity.
The Honorable Deborah L. Wince-SmithPresident & CEOCouncil on Competitiveness
The Honorable Ernest J. MonizSecretary of EnergyU.S. Department of Energy
The Honorable Norman R. AugustineFormer Chairman and Chief Executive OfficerLockheed Martin Corporation
8:45 Clean Energy Manufacturing InitiativeLocation: Auditorium
The Honorable David T. DanielsonAssistant Secretary for Energy Efficiency and Renewable EnergyU.S. Department of Energy
9:00 How to Compete in the Global EconomyLocation: Auditorium
This session will explore how companies remain competitive in an economy characterized by transition, turbulence and transformation. Panel leaders will reflect on the strategic investments, partnerships, and vision needed to compete in the global economy. This session will provide perspective on the leadership of individual organizations, and elucidate strengths and weaknesses in America’s ability to support and cultivate world-class innovators.
Framing Questions
How do U.S. companies stay ahead of their domestic and foreign competitors?
How well equipped is the Unites States to attract investments from companies that can locate business units across the globe?
Agenda
7
Moderator
The Honorable Patrick D. GallagherActing Deputy Secretary of Commerce; and DirectorNational Institute of Standards and Technology
Speakers
Mr. Ramanath RamakrishnanExecutive Vice President and Chief Technology OfficerEaton Corporation
Mr. Tom Werner Chief Executive OfficerSunPower Corporation
9:45 A View from the HillLocation: Auditorium
In this panel, the group will hear congressional leadership reflecting on the changing energy landscape, the recent rebound in the U.S. manufacturing sector, and what this means for their home states.
Keynote Speakers
The Honorable Marcia C. KapturU.S. House of Representatives
The Honorable Randall M. Hultgren (invited)U.S. House of Representatives
10:05 Coffee and Networking BreakLocation: Auditorium Lobby
10:30 A View from the White House
The Honorable Deborah L Wince-SmithPresident & CEOCouncil on Competitiveness
The Honorable Gene B. SperlingDirector of the National Economic Council andAssistant to the President for Economic PolicyThe White House
11:00 Carpe Manufacturing! Leveraging America’s Advantages for U.S. Energy and Manufacturing Competitiveness
Location: Auditorium
With low energy prices, rising foreign labor costs, strong intellectual property protection, and a favorable exchange rate, the United States is, by many accounts, poised for a resurgence in manufacturing. This session brings together the actors in the innovation ecosystem—private industry, academia, the national laboratories, and the government—to explore the following key questions.
Framing Questions
How can the United States leverage its world-class research and development institutions, skilled labor-force, the shale gas boom, and robust entrepreneurial and investment ethos to unleash the intrinsic potential of this distinctive time?
What government policies, programs, and initiatives are central to unlocking this resurgence?
Moderator
Dr. James H. StockMemberCouncil of Economic Advisers
Speakers
Ms. Amy EricsonU.S. Country PresidentAlstom Corporation
Dr. Lloyd JacobsPresidentUniversity of Toledo
Mr. Jeff WilcoxVice President, EngineeringLockheed Martin Corporation
Ms. Carol WilliamsExecutive Vice PresidentManufacturing & Engineering, Supply Chain and Environmental, Health & Safety OperationsThe Dow Chemical Company
Mr. Roger WoodPresident and Chief Executive OfficerDana Holding Corporation
Council on Competitiveness AEMC Summit Program
8
AFTERNOON
12:00 LunchLocation: Main Atrium
12:45 Lunch KeynoteLocation: Main Atrium
Introduction
The Honorable Barton J. GordonPartnerK&L Gates
Keynote Speaker
The Honorable Steny H. HoyerU.S. House of Representatives
1:15 Coffee and Exhibits ShowcaseLocation: Auditorium Lobby
1:30 Technologies Driving the United States to Our Energy Future
Location: Auditorium
During the last several years, global investment in the clean energy sector has risen nearly fivefold, growing from $54 billion in 2004 to $269 billion worldwide in 2012. The United States faces a stark choice: the energy technologies of the future can be developed and manufactured in America for export around the world, or we can cede global leadership and import those technologies. The panel brings together leaders that create, enable, or deploy the technologies that drive U.S. competitiveness in the production of clean energy products and/or increase energy productivity across the U.S. industrial base.
Framing Questions
What are the technologies that the United States needs to focus on to ensure leadership in the clean energy sector?
How do advanced manufacturing technologies drive energy efficiency throughout the U.S. industrial base?
Moderator
The Honorable Alexander A. “Andy” KarsnerChief Executive OfficerManifest Energy
Speakers
Dr. Sujeet ChandSenior Vice President and Chief Technology OfficerRockwell Automation
Mr. Peter DavidsonExecutive DirectorLoan Program OfficeU.S. Department of Energy
Dr. Robert EasterPresidentUniversity of Illinois
Dr. Eric IsaacsDirectorArgonne National Laboratory
Mr. Michael MansuettiPresidentRobert Bosch LLC
2:15 Platforms for Innovation and Manufacturing Competitiveness—the Roles of the National Laboratories
Location: Auditorium
National laboratories are recognized as being some of the deepest repositories of technological expertise and one of the greatest assets in the national innovation ecosystem. The panel brings together industry and national laboratory leaders to discuss how national laboratories can utilize their assets to encourage widespread economic development in the United States.
Framing Questions
Through the AEMC Partnership Dialogues in 2013, we have discussed the role of national laboratories as epicenters of excellence and as sources of knowledge spillover. What are the laboratories doing to promote knowledge spillover and therefore foster economic growth?
How do laboratories balance their core mission of national security and scientific research while responding to the calls from the government and the private sector to help drive economic growth?
Moderator
The Honorable David T. DanielsonAssistant Secretary for Energy Efficiency and Renewable EnergyU.S. Department of Energy
Agenda
9
Speakers
Dr. William GoldsteinDeputy Director for Science & TechnologyLawrence Livermore National Laboratory
Dr. Thomas MasonDirectorOak Ridge National Laboratory
Mr. Stephen C. NoletPrincipal Engineer, andSenior Director of Innovation & TechnologyTPI Composites, Inc.
Dr. Jud VirdenAssociate Laboratory DirectorEnergy and Environment DirectoratePacific Northwest National Laboratory
3:15 Leadership Reflections: Energy & Manufacturing in the Innovation Economy
Location: Auditorium
Over the last 30 years, competitive pressures created by new and growing markets as well as technological progress have fundamentally changed the structure of most American companies. Many vertically integrated industrial giants shed business functions not defined as their core competency. Manufacturing tops the list of functions moved out from within four walls of a company to foreign or domestic subcontractors.
Framing Questions
What are the consequences of this tremendous structural shift in the U.S. economy?
What role does manufacturing play in an innovation-driven economy such as the United States? What role will manufacturing play in the future U.S. economy?
Moderator
Dr. Teresa A. SullivanPresidentUniversity of Virginia
Speakers
Dr. Suzanne BergerRaphael Dorman-Helen Starbuck Professor of Political Science, andCo-Chair, Production in the Innovation Economy ProjectMassachusetts Institute of Technology
Dr. Paul J. HommertDirectorSandia National Laboratories, andPresidentSandia Corporation
Mr. Michael IdelchikVice President – Advanced TechnologiesGE Global Research
4:00 Closing Remarks Location: Auditorium
The Honorable David T. DanielsonAssistant Secretary for Energy Efficiency and Renewable EnergyU.S. Department of Energy
The Honorable Deborah L. Wince-SmithPresident & CEOCouncil on Competitiveness
4:30 Summit Concludes
Council on Competitiveness AEMC Summit Program
10
Exhibits
Additive Manufacturing in the 21st CenturyAdditive manufacturing (AM) techniques build precisely detailed and complex 3-D parts from scratch by depositing materials only where they are specified in a digital design file, layer by layer. This new approach to manufacturing has the potential to change the way we design, produce and use products while saving energy, shortening time-to-market, and enabling entirely new designs and products that cannot be produced any other way. This hands-on AM exhibit will allow you to hold AM parts, see a robot with more than 80 AM parts designed and built entirely by students, talk to industry representatives and see a commercial-scale machine build a part right in front of your eyes. Our exhibitors, America Makes and Oak Ridge National Laboratory’s Manufacturing Demonstration Facility are examples of organizations working on AM.
The Future of Everyday CarsEmerging battery technology allows all-electric operation to fulfill the daily needs of most drivers. For very long trips, plug-in hybrids pair an internal combustion engine with the electric drive system, and for battery electric vehicles, the availability of fast-charging infrastructure is on the rise. Vehicles such as this are the future of everyday cars and will soon be more readily available on the market. GM’s Chevy Volt is an example of a plug-in hybrid vehicle that utilizes battery and manufacturing technologies based on enterprising technologies developed with the support of DOE. DOE has supported the development of electric drive technologies (e.g., batteries, motors) and utilizes plug-in electric vehicles in its fleet—illustrating its commitment to clean, fuel-efficient vehicles.
Exhibits
11
Advanced Manufacturing Innovation TrendsSeveral innovation trends are emerging that will either disrupt or augment the future of manufacturing. These technologies are arising from start-ups and major tech companies. Integration and deployment into existing manufacturing companies will be vitally important to ensure competitive advantages are maintained. The hands-on exhibit will showcase three key technologies in the space of digital manufacturing, collaborative robotics, and nano-technologies. You will experience tools, such as tablets and wearable technologies, that enable dynamic instructions to communicate with a factory shop floor, a robot that is designed to work alongside humans on the shop floor, and nano-scaled particles that lowers energy consumption and extends the life of tooling. The exhibit includes examples of innovation integrations into manufacturing presented by John Deere, along with Rethink Robotics and NanoMech.
21st Century Smart Manufacturing: Building Infrastructure Powering Smart DecisionsSmart Manufacturing (SM) infrastructure enables all information about the manufacturing process to be available when it is needed, where it is needed, and in the form it is needed across the entire manufacturing value-chain to power smart decisions. Islands of efficiency become interoperable, networked, and resilient solutions to drive transformational manufacturing enterprise-performance for any size, level of technical sophistication, or resource availability at low cost. A scalable, cross-industry, networked-information SM Platform is needed to integrate existing and future plant-level data, simulations and systems across manufacturing seams and orchestrate business real-
time action. An open architecture will attract entirely new communities of solution providers to merge with and enhance existing solutions.
In this exhibit, learn about the EERE-supported project to develop this SM infrastructure through an industrial-scale demonstration, achieving transformational energy productivity gains. The exhibitors and project participants, Smart Manufacturing Leadership Coalition (SMLC) and Rockwell Automation (SMLC Member), are involved in a national initiative to develop and sustain the SM infrastructure. At one test bed in a U.S. Army manufacturing plant, Rockwell Automation technology anticipates extracting previously unavailable energy data and correlating it with production data to enable real-time energy reductions via the SM Platform.
Council on Competitiveness AEMC Summit Program
12
Geothermal Heat Pump System Geothermal heat pump systems are the most energy and cost efficient systems on the market for heating and cooling. The technology uses the relatively constant temperature of the earth (thermal energy) to provide heating, air conditioning and hot water. Ground and water temperatures, six feet below the earth’s surface, stay relatively constant throughout the year. This allows the system to provide extremely efficient heating or cooling all year long in virtually any climate. The Summit will demonstrate a Bosch geothermal heat pump system that is manufactured in Ft. Lauderdale, Florida, for domestic use and export.
Automated Driving FunctionsMaking accident-free driving a reality will include achieving the goal of automated driving. Although fully-automated driving is still on the horizon, an increasing number of safety and driver assistance functions are now offered. Today, more than 90 percent of traffic accidents are the result of human error, and accidents around the world cause 1.3 million deaths each year.1 Reducing the number of accidents is a major focus of automotive research, development and manufacturing. For instance, if all vehicles were equipped with an automatic emergency braking system, up to 72 percent of rear-end collisions resulting in injury could be prevented.2 Representative examples of safety and driver assistance capabilities are presented by Bosch. The videos you see provide some insight into the work researchers are undertaking to develop increasingly sophisticated automated driving functions, ultimately enabling a fully-automated, more energy-efficient driving experience within the next decade.
1 Bosch Accident Research and U.S. Car Naturalistic Driving Study (2006).2 Bosch Accident Research, 2009-2013.
Exhibits
13
Accelerating Manufacturing InnovationThe rapid transition of innovative technologies and processes from the laboratory to production is essential to the success of manufacturing enterprises in the 21st century. Accelerating manufacturing innovation includes focuses on: additive manufacturing, advanced materials, the digital tapestry for manufacturing, and next-generation electronics. These four strategic threads will drive breakthrough performance and affordability in new products and systems; they also closely align with newly formed Institutes in the National Network for Manufacturing Innovation (NNMI). The four threads are demonstrated by a multi-year Advanced Manufacturing Initiative, launched by Lockheed Martin, as presented in the exhibit. The exhibit features graphics, videos, and next-generation hardware that demonstrate the power, potential, and business value of investments in advanced manufacturing.
Council on Competitiveness AEMC Summit Program
14
BOARD
ChairmanMr. Samuel R. AllenDeere & Company
Industry Vice ChairmanMr. Michael R. SplinterApplied Materials, Inc.
University Vice ChairmanDr. Michael M. CrowArizona State University
Labor Vice ChairmanMr. William P. HiteUnited Association of Plumbers and Pipefitters
Chairman EmeritusMr. Charles O. Holliday, Jr.Bank of America
President & CEOThe Honorable Deborah L. Wince-Smith
EXECUTIVE COMMITTEE
Mr. Thomas R. BaruchFormation 8 Partners
Dr. Gene D. BlockUniversity of California, Los Angeles
Mr. William H. BohnettWhitecap Investments LLC
Mr. James K. CliftonGallup, Inc.
Dr. John J. DeGioiaGeorgetown University
Dr. Alice P. GastLehigh University
Mr. James S. HagedornThe Scotts Miracle-Gro Company
Ms. Sheryl HandlerAb Initio
Dr. Paul J. HommertSandia National Laboratories
The Honorable Shirley Ann JacksonRensselaer Polytechnic Institute Dr. Linda P. KatehiUniversity of California, Davis
Dr. Pradeep K. KhoslaUniversity of California, San Diego
Dr. Steven KnappThe George Washington University
Mr. John E. McGladeAir Products
Mr. James B. MillikenUniversity of Nebraska
Dr. Harris PastidesUniversity of South Carolina
Mr. James M. PhillipsNanoMech, Inc.
Mr. Nicholas T. PinchukSnap-on Incorporated
Prof. Michael E. PorterHarvard Business School
Dr. Luis M. ProenzaThe University of Akron
Mr. Punit RenjenDeloitte LLP
Mr. Robert L. ReynoldsPutnam Investments
Dr. Kenan E. SahinTIAX LLC
Mr. Mayo A. Shattuck, IIIExelon Corporation
Dr. Lou Anna K. SimonMichigan State University
Mr. Edward M. SmithUllico Inc.
Mr. Lawrence WeberW2 Group, Inc.
Ms. Randi WeingartenAmerican Federation of Teachers, AFL-CIO
Dr. Robert J. ZimmerThe University of Chicago FOUNDER
John A. YoungHewlett-Packard Company
Council on Competitiveness Board and Executive Committee
About the Council on Competitiveness
15
GENERAL MEMBERSHIP
Dr. Michael F. AdamsThe University of Georgia
Mr. Joseph A. AluttoThe Ohio State University
Dr. Joseph E. AounNortheastern University
Mr. J. David Armstrong, Jr.Broward College
Mr. Neil Z. AuerbachHudson Clean Energy Partners
Dr. James F. BarkerClemson University
The Honorable Sandy K. BaruahDetroit Regional Chamber
Dr. Mark P. BeckerGeorgia State University
Ms. Stephanie W. BergeronWalsh College
Mr. George BlankenshipLincoln Electric, North America
Dr. Joel BloomNew Jersey Institute of Technology
Dr. Lee C. BollingerColumbia University
Mr. Terry BostonPJM Interconnection
Dr. Richard H. BrodheadDuke University
Dr. Robert A. BrownBoston University
Mr. Goodloe E. ByronPotomac Energy Fund
Mr. Steve CardonaNzyme2HC, LLC
Dr. Robert L. CaretUniversity of Massachussetts
Dr. Curtis R. CarlsonSRI International
Dr. Roy A. ChurchLorain County Community College
Dr. James P. ClementsWest Virginia University
Dr. Mary Sue ColemanUniversity of Michigan
The Honorable Mitchell E. Daniels, Jr.Purdue University
Dr. William W. DestlerRochester Institute of Technology
Mr. Ernest J. DianastasisCAI
Mr. Daniel R. DiMiccoNucor Corporation
Dr. Joseph A. DiPietroThe University of Tennessee
Dr. Nicholas B. DirksUniversity of California, Berkeley
Dr. Charlene M. DukesPrince George’s Community College
Dr. Robert A. EasterUniversity of Illinois
Mr. Jeff M. FettigWhirlpool Corporation
Dr. Carol L. FoltThe University of North Carolina at Chapel Hill
Mr. Kenneth C. FrazierMerck & Co., Inc.
Mr. John A. FryDrexel University
Dr. Judy L. GenshaftUniversity of South Florida
Mr. Gregory E. GlarosSYNEXXUS, Inc.
Mr. Robert B. GraybillNimbis Services, Inc. Mr. Michael P. GregoireCA Technologies
Mr. Robert GreifeldThe NASDAQ OMX Group, Inc.
Dr. Amy GutmannUniversity of Pennsylvania
Mr. Peter T. HalpinWorld Resources Company
Dr. Philip J. HanlonDartmouth College
Dr. Patrick T. HarkerUniversity of Delaware
Ms. Marillyn A. HewsonLockheed Martin Corporation
Dr. John C. HittUniversity of Central Florida
Mr. John D. HofmeisterJKH Group
Mr. Jeffrey R. ImmeltGeneral Electric Company
Dr. Lloyd A. JacobsUniversity of Toledo
Ms. Madeleine S. JacobsAmerican Chemical Society
Fr. John I. JenkinsUniversity of Notre Dame
Mr. Jeffrey A. JoerresManpowerGroup
Council on Competitiveness Membership
Council on Competitiveness AEMC Summit Program
16
Dr. John P. JohnsonEmbry-Riddle Aeronautical University
Dr. Robert E. JohnsonBecker College
Dr. Lester A. LeftonKent State University
Dr. J. Bernard MachenUniversity of Florida
Mr. Bill MahoneySCRA
Dr. Sally MasonUniversity of Iowa
Dr. David MaxwellDrake University
Mr. Sean McGarveyBuilding and Construction Trades Department, AFL-CIO
Mr. Mark McGoughIoxus, Inc.
Dr. Michael A. McRobbieIndiana University
Dr. Carolyn MeyersJackson State University
Mr. Paul MichaelsMars, Incorporated
Dr. Richard K. MillerFranklin W. Olin College of Engineering
Dr. H. Keith Moo-YoungWashington State University Tri - Cities
Dr. Martin J. Murphy, Jr.CEO Roundtable on Cancer
Dr. Mark G. MykityshynTangible Software, Inc.
Mr. Mark A. NordenbergUniversity of Pittsburgh
Mr. Keith D. NosbuschRockwell Automation, Inc.
Dr. Santa J. OnoUniversity of Cincinnati
Dr. Eduardo J. PadrónMiami Dade College
Dr. David W. PershingUniversity of Utah
Dr. G. P. “Bud” PetersonGeorgia Institute of Technology
Dr. William C. Powers, Jr.The University of Texas at Austin
Dr. Edward RayOregon State University
Dr. L. Rafael ReifMassachusetts Institute of Technology Mr. Ralph ResnickNational Center for Defense Manufacturing and Machining
Mr. Rory RiggsBalfour, LLC
Mr. Thomas W. RossThe University of North Carolina
Mr. Douglas RothwellBusiness Leaders for Michigan
VADM John R. RyanCenter for Creative Leadership
Mr. E. Scott SantiIllinois Tool Works Inc.
Dr. Leonard A. SchlesingerBabson College
Dr. David E. ShawD. E. Shaw Research
Mr. Scott D. SheffieldPioneer Natural Resources Company
Dr. David J. SkortonCornell University
Mr. Frederick W. SmithFedEx Corporation
Mr. Jack StackSRC Holdings Corporation
Ms. Susan S. StautbergPartnerCom Corporation
Dr. Charles W. StegerVirginia Polytechnic Institute and State University
Dr. Elisa StephensAcademy of Art University
Mr. Edward StolperCalifornia Institute of Technology
Dr. Elizabeth StrobleWebster University
Dr. Teresa SullivanUniversity of Virginia The Honorable Subra SureshCarnegie Mellon University
Dr. Satish K. TripathiState University of New York at Buffalo
Dr. Thomas M. UhlmanNew Venture Partners LLC
Dr. Steve L. VanAusdleWalla Walla Community College
Mr. Frederick H. WaddellNorthern Trust Corporation
About the Council on Competitiveness
17
Dr. Jeffrey WadsworthBattelle Memorial Institute
Mr. Joseph L. WelchITC Holdings Corp.
Dr. Kim A. WilcoxUniversity of California, Riverside
Mr. Keith E. WilliamsUnderwriters Laboratories Inc.
Dr. Heather WilsonSouth Dakota School of Mines & Technology
Mr. Rick E. WinninghamTheravance, Inc.
Dr. W. Randolph WoodsonNorth Carolina State University
Dr. Mark S. WrightonWashington University in St. Louis
Mr. Paul A. YarossiHNTB Holdings Ltd
INTERNATIONAL AFFILIATE
Ms. Amy EricsonAlstom Inc.
NATIONAL LABORATORY PARTNERS
Dr. Bret E. KnappLawrence Livermore National Laboratory
Dr. Eric D. IsaacsArgonne National Laboratory
Dr. Michael KlusePacific Northwest National Laboratory Dr. Thomas E. MasonOak Ridge National Laboratory
NATIONAL AFFILIATES
Mr. Marc ApterIEEE–USA
Ms. Rebecca O. BagleyNorTech
Mr. James C. BarroodRothman Institute of Entrepreneurship
Dr. Walter G. BumphusAmerican Association of Community Colleges
Ms. Cathleen A. CampbellU.S. Civilian Research & Development Foundation
Mr. C. Michael CassidyGeorgia Research Alliance, Inc.
Mr. Jeffrey FinkleInternational Economic Development Council
Dr. Eric FriedlanderAmerican Mathematical Society
Mr. Richard GreféAIGA
Mr. Dominik KnollWorld Trade Center of New Orleans
Mr. Jack E. KosakowskiJunior Achievement USA
Dr. Alan I. LeshnerAmerican Association for Advancement of Science
Dr. Paul C. MaxwellThe Bi-National Sustainability Laboratory
Mr. Jack E. MiddletonSMC3 LTC Harrison A. PageOak Ridge Associated Universities
Dr. Hunter R. RawlingsAssociation of American Universities
Mr. Steven G. ZylstraArizona Technology Council
Council on Competitiveness AEMC Summit Program
18
DISTINGUISHED & SENIOR FELLOWS
The Honorable Erich Bloch
The Honorable Daniel S. Goldin
The Honorable Bart J. Gordon
The Honorable Alexander A. Karsner
The Honorable Alan P. Larson
Mr. Edward J. McElroy
Mr. John F. Mizroch
Ms. Michelle Moore
The Honorable Thomas Ridge
Dr. Anthony J. Tether
SENIOR ADVISOR
Ms. Jennifer S. Bond
Ms. Nancy Smith-Nissely
STAFF
Mr. William C. BatesExecutive Vice President and Chief of StaffTreasurer and Secretary to the Board
Mr. Chad EvansExecutive Vice President
Dr. Cynthia R. McIntyreSenior Vice President
Ms. Cathy TripodiSenior Vice President
Ms. Lisa HannaVice President
Ms. Patricia A. HennigController
Mr. Mohamed N. KhanVice President
Ms. Deborah KoolbeckVice President
Mr. Christopher MustainVice President
Mr. Zachary SchaferSenior Policy Director
Dr. Clara SmithSenior Policy Director
Mr. Michael BushPolicy Director
Mr. Gourang WakadeDirector, Membership & Strategic Development
Mr. Mark KarkennyProgram Manager
Mr. Aaron S. MalofskyProgram Manager
Ms. Marie Plishka Program Manager
Mr. Phillip TypaldosProgram Manager
Ms. Marcy S. JonesAssistant to the President and Office Manager
Mr. Thomas TruebloodDatabase Administrator
Council on Competitiveness Fellows, Advisors and Staff
About the Council on Competitiveness
19
WHO WE ARE
The Council’s mission is to set an action agenda to drive U.S. competitiveness, productivity and leadership in world markets to raise the standard of living of all Americans.
The Council on Competitiveness is the only group of corporate CEOs, university presidents and labor leaders committed to ensuring the future prosperity of all Americans and enhanced U.S. competitiveness in the global economy through the creation of high-value economic activity in the United States.
Council on Competitiveness1500 K Street, NW, Suite 850Washington, D.C. 20005T 202 682 4292F 202 682 5150www.compete.org
HOW WE OPERATE
The key to U.S. prosperity in a global economy is to develop the most innovative workforce, educational system and businesses that will maintain the United States’ position as the global economic leader.
The Council achieves its mission by:
• Identifying and understanding emerging challenges to competitiveness
• Generating new policy ideas and concepts to shape the competitiveness debate
• Forging public and private partnerships to drive consensus
• Galvanizing stakeholders to translate policy into action and change
About the Council
JOIN THE CONVERSATION
Network: Ronald Reagan BuildingUsername: CouncilPassword: 25150
@CompeteNow #2013AEMCSummit