8/4/2019 alwis_110402_e
1/8
WAREHOUSE MANAGEMENT SYSTEM
LOGIM Software GmbH
Neuschlo 1 - 8142 Wundschuh - Austria
Tel +43 (3135) 55 552 0 - Fax +43 (3135) 55 552 - 255
[email protected] - www.logim.at
WWW.ALWIS.NET
8/4/2019 alwis_110402_e
2/8
ALWIS
MANAGEMENT AND
OPTIMIZATION OF WAREHOUSE
RELATED GOODS FLOWS
The efficient planning, management and control ofmaterial and information flows are the targets of
logistics. A logistics system can only work well if it is
tailored to the demands of the business.
Our aim is, therefore, to provide you with ALWIS, our
Warehouse Management System designed for the
improvement of your operational infrastructures.
Source: Knapp Logistik Automation Gmbh
8/4/2019 alwis_110402_e
3/8
ALWIS is a modular Warehouse Management System that
organizes your entire warehouse management in a clear
and efficient way.
Saving Time with ALWIS
ALWIS simplifies the processing of incoming goods and
allows them to be stored in a practical and efficient
manner. It also ensures that transports within the ware-
house are being optimally managed and, therefore,
shortened. The picking time is reduced and, additionally,
ALWIS helps to avoid picking errors.
Foresight with ALWIS
ALWIS knows when and where goods are needed and
ensures that only the ordered goods leave your warehouse
at the right time.
Communication with ALWIS
ALWIS communicates with all other company areas by
means of interfaces. For example, ALWIS logs the
wage-related work times and then routes them to the
wage accounting department.
Analysis with ALWIS
The ALWIS Information System supports the evaluation of
your warehouse processes.
Simulation with ALWIS
ALWIS simulates your new warehouse and is the right
planning tool for changing work requirements.
Cost Reduction with ALWIS
ALWIS optimizes all warehouse processes and by doing so,
lowers the costs within your entire warehouse.
ONE SYSTEM
FOR ALL TASKS
The three ALWIS modules, the
Warehouse Management System, the
Online System and the Information
System, enable optimized interaction bet-
ween people, technology and information.
EFFICIENT AND ECONOMICAL
WAREHOUSE MANAGEMENT SYSTEM
INFORMATION SYSTEM ONLINE SYSTEM
8/4/2019 alwis_110402_e
4/8
THE ENTIRE WAREHOUSE
UNDER CONTROL
The Warehouse Management System is an essential
component of ALWIS and contains all the necessary
functionalities for running a warehouse.
An outstanding feature of the ALWIS WarehouseManagement System is its high level of practicality.
INCOMING GOODS
ALWIS begins at a critical point in the warehouse:
Incoming Goods. In order to avoid errors that can later
affect processes in the entire warehouse, "Missing Item
Master Data" can be completed already in the Incoming
Goods area.
Only one scan per load carrier is the ALWIS principal!
ALWIS processes all commercial barcodes (e.g. EAN 128,
EAN 13) and incoming goods without barcodes are
processed quickly and efficiently.
WAREHOUSE MODELING
"Warehouse Modeling" forms the basis for the correct
control and assessment of all goods flows. Only aftercreating a detailed model of your warehouse, can the
optimization of goods flows and business processes be
achieved. Of course, variable storage strategies can be
applied as well.
CROSS-DOCKING
Cross-docking is a valuable optimization tool. The goods are delivered "just in time" and do not remain
in the warehouse longer than necessary. The control of cross-docking goods by unloading them
directly at the allocated area for outgoing goods is also very convenient.
OUR MOTTO:
ONLY ONE SCAN
PER LOAD CARRIER
INCOMING GOODS
STORAGE LOCATION MANAGEMENT
MATERIAL FLOW CONTROL
PICKING PLANNING
OUTGOING GOODS
WAREHOUSE MANAGEMENT SYSTEM
Source: Barcotec Computer und Peripherie GmbH
8/4/2019 alwis_110402_e
5/8
8/4/2019 alwis_110402_e
6/8
EVERYTHING IN OVERVIEW
PERSONNEL REQUIREMENT PLANNING
The ALWIS Information System can carry out exact
personnel requirement planning for all areas of a
warehouse. Electronic dispatch notifications and customer
orders are also taken into consideration in advance when
planning personnel requirements.
TIME CALCULATION AND BONUS SYSTEM
The question "How productive are my personnel?" can be
easily answered with ALWIS.
A realistic allotted time can be calculated based on cycle
times, picking times, classification of items in handlingclasses (according to size and type of item) and
consideration of the picking method. Comparison of the
exact time calculation of a picking order with the actual time
taken, determines the actual productivity and thus the
efficiency of the picking operator (individual or area-based).
This can entitle the operator to a bonus. Further advantages
can develop via interfaces to other company areas.
For example, the transmission of the logged time to the
existing payroll accounting system replaces the manual
registration of work times.
All of this significantly increases the efficiency in your ware-
house.
SIMULATION
Create your virtual warehouse and analyze your
warehouse topology! ALWIS allows you to model
your own virtual warehouse and simulate the duration
of your business processes with real data over a
defined time period (e.g. last month). You then
receive the evaluation of your new warehouse
topology. You can carry out this analysis of your
warehouse without having to make any physical
changes.
Thus, you can respond quickly to the different work
processes and re-optimize your operations according-ly. You save time and, last but not least, money.
EVALUATIONS AND STATISTICS
You can also generate a wide range of evaluations
from your existing database. In order to make things
easier for you, the most important evaluations are
already prepared in ALWIS.PERSONNEL REQUIREMENT PLANNING
TIME CALCULATION
SIMULATION
BONUS SYSTEM
EVALUATIONS
STATISTICS
INFORMATION SYSTEM
8/4/2019 alwis_110402_e
7/8
8/4/2019 alwis_110402_e
8/8
Recommended