R22
Single & Double Skin Evaporator UnitsCooling Capacity : 80 to 750 MBH
AIR COOLED HIGH STATIC DUCTED SPLIT SYSTEM
Innovative Outstanding DESIGN & PERFORMANCE
AIR COOLED CONDENSING UNITS SYSTEM FEATURES & CONSTRUCTION
GENERAL DESCRIPTIONThe TACCS_F series with new features is suitable for hotel, o�ce, hospitals, schools, factory and supermarket applications. The low noise and compact series are completely leak tested, evacuated,dehydrated and charged with dry nitrogen to maintain system “dryness” prior to �eld piping connections.
Independent outdoor unit module of 100,000 , 125,000 & 150,000 Btu/hr are connected to one indoor unit toachieve the rated cooling capacity from 200,000 to 750,000 Btu/hr.
ciency, low noise and high reliability of Hermetic Scroll Compressor(s) designed with support on rubber mounting to minimize vibration. Hermetic Scroll Compressor(s) type operating at 2950 rpm.No contact scroll design thatminimizes friction, increasevolumetric e�ciency and reducesvibration, thus longer service life.100% suction gas cooled motor.Low power consumption with highEER and no crankcase heaterrequired.
By cycling o� compressor(s) operation to matchbuilding load, no energy is being wasted when roomload requires lesser cooling capacity.No total shut down when servicing or repairing a faultycompressor.
3 phase induction condenser fan motor.IP 55 Class “F”construction ensure extra motor protection.Fan motor operating speed at 950 RPM with highstarting torque and low noise fan operation.
With internal line break or solid state motor protectors.High low pressure cut~out safety control device isprovided to protect compressor from high dischargepressure and system leakage.
The condensing unit air discharge can easily beconverted at site to suit the installation space bymoving the condenser fan assembly from top to side discharge. (Applicable model for TACCS 100 F, TACCS125 F & TACCS 150 F only)
MODULAR CONDENSING UNITStaggered row of 3/8” (9.5mm)OD inner groove copper tubeswith 25 to 30 % more surfacearea guarantee better heattransfer.Mechanically expanded intodie-formed corrugatedaluminium �ns.Integral subcooling circuit tomaximize system e�ciency andreduce �ash gas formation.Coil fully leak pressure testedon 450 psig (30 bar).Access port provided on discharge and suction linesfor pressure measurements and charging.
Constructed from electro-galvanized heavy steel sheet to ensure units casing rigidity and eliminate vibration.Panels are painted with epoxy polyester powdercoating for excellent �nish, weather ability andcorrosion resistance against severe external conditions.
Leak and pressure tested at 450 psig (31 bar).Pressure ports are provided on the discharge, liquidand suction line.Evacuated, dehydrated and pressurized with drynitrogen for storage and shipping purpose.
SCROLL COMPRESSOR(S)
MULTIPLE COMPRESSOR
CONDENSER FAN MOTOR
EFFICIENT CONDENSER COIL
CASING CONSTRUCTION
FULL LEAKAGE TEST ON REFRIGERANT CIRCUIT
1
FLEXIBLE CONDENSER AIR DISCHARGE
Innovative Outstanding DESIGN & PERFORMANCE
EVAPORATOR BLOWER UNITS SYSTEM FEATURES & CONSTRUCTION
GENERAL DESCRIPTIONThe ducted evaporator blower units; each consist of anevaporator coil, a centrifugal forward curved blower fancomplete with drive package and �lters and enclosed in asingle / double skin casing cabinetry; are completelyfactory packaged to provide greater �exibility for all kindsof application. These �exibility includes;
A wide range of model sizes covering cooling capacitiesfrom 80 MBH to 750 MBH and each model size also has awide band of air �ow rates (CFMs) covering a wide bandof static pressure to meet almost any system demands.
Three type of con�gurations namely, horizontal ceilingducted type, horizontal �oor mounted ducted type and vertical �oor standing ducted type (onlyfor Double Skin type), each with various optimal fan discharge arrangements, covering a wider cooling capacitiy range; can be selected to suit anyinstallation requirement and space constraint. The evaporator blower unit can also be provided with optimal accessory sections such as bag �lter section, angle �lter section and mixing box section. (ForDouble Skin Unit)
Staggered row of seamless inner groove copper tubesmechanically expanded in to die-formed high e�ciencycorrugated aluminium �ns to ensure positive bonding.Independent thermal expansion valve with externalequalizer for better refrigerant control and wider loadcondition.Evacuated, dehydrated and charged with dry nitrogen.Coil fully leak pressure tested to 450 psig.
Belt driven drive package o�ers �exibility on variousair �ow rate and various static pressure applications.Single large diameter double inlet double width blowers(AMCA certi�ed) reduce the noise level and eliminatesthe need for common transition and eliminates airunbalance.Note: Only the TEB 80 F & TEB 100 F Single Skin use direct drive motor.
VERSATILE APPLICATION
EVAPORATOR COIL
DRIVE PACK AGE AND BLOWER
CABINET CONSTRUCTION SINGLE SKIN EVAPORATOR UNIT
Casing constructed with durable electro-galvanized heavygauge steel sheet and insulated with (1/2) inch or 13 mmthick x 1 1/2 lb/ft3 (24kg/m3) PE Foam.Aesthetically painted with epoxy polyester powdercoating to provide excellent �nish, weather ability andcorrosion resistance.
Extruded aluminium rigid structural framework
1 inch thick polyurethane insulated double skin casing cabinetry
Removable access panels
Hydrophilic coated evap-orator coil to prevent water carry-over
Thermal expansion valves
control
High efficiency TEFC motor and dynamically balanced and aligned drive package
FILTERSAll standard air �lters are 1 inch thick washablesynthetic �ber and designed for easy withdrawal andrenewal of �lter cells.Flexible loading con�gurations to meet buildingrequirements.
EVAPORATOR FAN MOTOR
3 phase squirrel cage induction (TEFC) fan motor of IP55; Class “F” insulation protection.Fan motor operating speed at 1450 RPM.All fan motor and drive assembly are internally isolatedfrom unit casing. For horizontal ceiling concealed ductedunits capacity range from 80 to 130 MBH, rubber padsare provided, for unit capacity 150 MBH and above, rubber grommets are provided. For all �oor moun-ted ducted unit, spring vibration isolators are provided.
2
Casing cabinetry are DOUBLE skinned one (1) inch or 25mm thick in fill panels construction from pressure injectedpolyurethane foam (PU) insulation with “K” value of 0.02Watts/oC & density 40 kg/m3, sandwiched betweengalvanized steel sheets.Unique cabinet frame work is constructed from rigidextruded aluminium structural section, locked togetherby rigid nylon corner jointing modules to form inherent strength stability.Removable panels on the left and right hand side of theunit to provide access to critical parts and components.Panels are painted epoxy powder polyester powdercoating for excellent finish, weather ability and corrosionresistance againts severe external conditions.
DOUBLE SKIN EVAPORATOR UNIT
MODULAR CONDENSING UNIT
3
PRODUCT LINE UP 22R
elll d oM : TACCS 80 F 80,000 BTU/HR
elll d oM : TACCS 100 F ~ TACCS 150 F 100,000 BTU/HR ~150,000 BTU/HR
(Horizontal Discharge / Top Discharge)
SINGLE SKIN & DOUBLE SKIN EVAPORATOR UNITS
elll d oM : TEB 80 F ~ TEB 100 F(SINGLE SKIN / DIRECT DRIVE)
elll d oM : THEB 200 F ~ THEB 250 F(SINGLE SKIN)
elll d oM : TFEB 300 F ~ TFEB 750 F(SINGLE SKIN)
elll d oM : THEB 80 FD ~ THEB 250 FD(DOUBLE SKIN)
elll od M : TFEB 300 FD ~ TFEB 500 FD(DOUBLE SKIN)
elll d oM : THEB 80 F ~ THEB 150 F(SINGLE SKIN / BELT DRIVE)
4
SPECIFICATIONS R22
THEB ~ TFEB - F Series with Single Skin Evaporator Unit (R22)
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDOO
R UNIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOROUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
THEB 80FTACCS 80F
80,000
23.45
8,090
16.2
2,400
0.4
1.0
535
1,056757
128
900
1,180
425
1/2
1.0
160
THEB 125FTACCS 125F
125,000
36.64
12,190
22.8
4,000
0.6
2.0
637
1,456757
138
900
1,080
940
5/8
1 3/8
190
THEB 150FTACCS 150F
150,000
43.96
15,850
32.8
4,600
0.6
2.0
790
1,456946
176
900
1,080
940
5/8
1 3/8
210
THEB 200FTACCS 100F X 2
200,000
58.62
22,180
41.5
6,300
0.6
4.0
790
1,655946
180
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 1/8 (2)
175 (2)
CENTRIFUGAL / BELT DRIVE
THEB 100FTACCS 100F
100,000
29.31
10,715
20.2
3,200
0.5
1.5
637
1,256757
133
900
1,080
940
5/8
1 1/8
175
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
THEB 250FTACCS 125F X 2
250,000
73.27
25,380
47.2
7,700
0.8
5.5
790
2,155946
280
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
190 (2)
THEB ~ TFEB - F Series with Single Skin Evaporator Unit (R22)
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDO
OR UN
IT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOR
OUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
TFEB 300F
TACCS 150F X 2
300,000
87.92
32,700
67.2
9,300
0.8
5.5
940
2,1551,185
360
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
210 (2)
TFEB 350FTACCS 100F X 1 &
TACCS 125F X 2350,000
102.58
36,470
67.5
10,500
0.8
7.5
1,245
2,1551,185
385
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 1/8(1) & 1 3/8(2)
175(1) & 190(2)
TFEB 400FTACCS 125F X 2 &
TACCS 150F X 1400,000
117.23
43,230
83.1
11,500
0.8
10.0
1,245
2,1551,185
410
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
190(2) & 210(1)
TFEB 500F
TACCS 125F X 4
500,000
146.54
50,260
92.3
15,000
1.2
10.0
1,245
2,5551,400
500
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
TFEB 600F
TACCS 150F X 4
600,000
175.85
68,400
139.2
18,000
1.4
15.0
1,610
2,5551,750
560
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
210 (4)
TFEB 750F
TACCS 150F X 5
750,000
219.81
86,750
175.7
22,000
1.4
20.0
1,915
2,5551,750
600
900 (5)
1,080 (5)
940 (5)
5/8 (5)
1 3/8 (5)
210 (5)
TFEB 450F
TACCS 150F X 3
450,000
131.89
50,550
103.1
13,500
1.0
10.0
1,245
2,1551,400
500
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
210 (3)
CENTRIFUGAL / BELT DRIVE
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
5
SPECIFICATIONSTHEB ~ TFEB - F7 Series with Single Skin Evaporator Unit (R407C)
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDOO
R UNIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOROUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
THEB 80F7TACCS 80F7
80,000
23.45
8,290
16.6
2,400
0.4
1.0
535
1,056757
128
900
1,180
425
1/2
1.0
160
THEB 125F7TACCS 125F7
125,000
36.64
12,240
22.9
4,000
0.6
2.0
637
1,456757
138
900
1,080
940
5/8
1 3/8
190
THEB 150F7TACCS 150F7
150,000
43.96
15,900
33.7
4,600
0.6
2.0
790
1,456946
176
900
1,080
940
5/8
1 3/8
210
THEB 200F7TACCS 100F7 X 2
200,000
58.62
22,080
41.9
6,300
0.6
4.0
790
1,655946
180
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 1/8 (2)
175 (2)
CENTRIFUGAL / BELT DRIVE
THEB 100F7TACCS 100F7
100,000
29.31
10,665
20.4
3,200
0.5
1.5
637
1,256757
133
900
1,080
940
5/8
1 1/8
175
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
THEB 250F7TACCS 125F7 X 2
250,000
73.27
25,480
47.4
7,700
0.8
5.5
790
2,155946
280
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
190 (2)
THEB ~ TFEB - F7 Series with Single Skin Evaporator Unit (R407C)
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDO
OR UN
IT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOR
OUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
TFEB 300F7
TACCS 150F7 X 2
300,000
87.92
32,800
69.0
9,300
0.8
5.5
940
2,1551,185
360
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
210 (2)
TFEB 350F7TACCS 100F7 X 1 &
TACCS 125F7 X 2350,000
102.58
36,520
67.9
10,500
0.8
7.5
1,245
2,1551,185
385
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 1/8(1) & 1 3/8(2)
175(1) & 190(2)
TFEB 400F7TACCS 125F7 X 2 &
TACCS 150F7 X 1400,000
117.23
43,380
84.2
11,500
0.8
10.0
1,245
2,1551,185
410
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
190(2) & 210(1)
TFEB 500F7
TACCS 125F7 X 4
500,000
146.54
50,460
92.7
15,000
1.2
10.0
1,245
2,5551,400
500
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
TFEB 600F7
TACCS 150F7 X 4
600,000
175.85
68,600
142.8
18,000
1.4
15.0
1,610
2,5551,750
560
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
210 (4)
TFEB 750F7
TACCS 150F7 X 5
750,000
219.81
87,000
180.2
22,000
1.4
20.0
1,915
2,5551,750
600
900 (5)
1,080 (5)
940 (5)
5/8 (5)
1 3/8 (5)
210 (5)
TFEB 450F7
TACCS 150F7 X 3
450,000
131.89
50,700
105.8
13,500
1.0
10.0
1,245
2,1551,400
500
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
210 (3)
CENTRIFUGAL / BELT DRIVE
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
6
SPECIFICATIONSTHEB ~ TFEB - F4 Series with Single Skin Evaporator Unit (R4I0A)
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDOO
R UNIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOROUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
THEB 80F4TACCS 80F4
80,000
23.45
8,290
16.6
2,400
0.4
1.0
535
1,056757
128
900
1,180
425
1/2
1.0
160
THEB 125F4TACCS 125F4
125,000
36.64
12,240
22.9
4,000
0.6
2.0
637
1,456757
138
900
1,080
940
5/8
1 3/8
190
THEB 150F4TACCS 150F4
150,000
43.96
15,900
33.7
4,600
0.6
2.0
790
1,456946
176
900
1,080
940
5/8
1 3/8
210
THEB 200F4TACCS 100F4 X 2
200,000
58.62
22,080
41.9
6,300
0.6
4.0
790
1,655946
180
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 1/8 (2)
175 (2)
CENTRIFUGAL / BELT DRIVE
THEB 100F4TACCS 100F4
100,000
29.31
10,665
20.4
3,200
0.5
1.5
637
1,256757
133
900
1,080
940
5/8
1 1/8
175
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
THEB 250F4TACCS 125F4 X 2
250,000
73.27
25,480
47.4
7,700
0.8
5.5
790
2,155946
280
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
190 (2)
THEB ~ TFEB - F4 Series with Single Skin Evaporator Unit (R4I0A)
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDO
OR UN
IT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOR
OUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
TFEB 300F4
TACCS 150F4 X 2
300,000
87.92
32,800
69.0
9,300
0.8
5.5
940
2,1551,185
360
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
210 (2)
TFEB 350F4TACCS 100F4 X 1 &
TACCS 125F4 X 2350,000
102.58
36,520
67.9
10,500
0.8
7.5
1,245
2,1551,185
385
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 1/8(1) & 1 3/8(2)
175(1) & 190(2)
TFEB 400F4TACCS 125F4X 2 & TACCS 150F4 X 1
400,000
117.23
43,380
84.2
11,500
0.8
10.0
1,245
2,1551,185
410
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
190(2) & 210(1)
TFEB 500F4
TACCS 125F4 X 4
500,000
146.54
50,460
92.7
15,000
1.2
10.0
1,245
2,5551,400
500
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
TFEB 600F4
TACCS 150F4 X 4
600,000
175.85
68,600
142.8
18,000
1.4
15.0
1,610
2,5551,750
560
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
210 (4)
TFEB 750F4
TACCS 150F4 X 5
750,000
219.81
87,000
180.2
22,000
1.4
20.0
1,915
2,5551,750
600
900 (5)
1,080 (5)
940 (5)
5/8 (5)
1 3/8 (5)
210 (5)
TFEB 450F4
TACCS 150F4 X 3
450,000
131.89
50,700
105.8
13,500
1.0
10.0
1,245
2,1551,400
500
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
210 (3)
CENTRIFUGAL / BELT DRIVE
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
7
SPECIFICATIONS R22
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDO
OR U
NIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOROUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
THEB 80 FDTACCS 80F
80,000
23.45
8,090
16.2
2,400
0.4
1.0
677
1,226874
900
1,180
425
1/2
1.0
160
THEB 100 FDTACCS 100 F
100,000
29.31
10,715
20.2
3,200
0.5
1.5
777
1,376 872
900
1,080
940
5/8
1 1/8
175
THEB 125FDTACCS 125F
125,000
36.64
12,190
22.8
4,000
0.6
2.0
777
1,576 872
900
1,080
940
5/8
1 3/8
190
THEB 200FDTACCS 100F x 2
200,000
58.62
22,180
41.5
6,300
0.6
4.0
980
1,7751,061
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 1/8 (2)
175 (2)
THEB 250FDTACCS 125F x 2
250,000
73.27
25,380
47.2
7,800
1.0
7.5
1,000
2,2351,161
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
190 (2)
CENTRIFUGAL / BELT DRIVE
THEB 150FDTACCS 150F
150,000
43.96
15,850
32.8
4,600
0.6
2.0
980
1,5751,061
900
1,080
940
5/8
1 3/8
210
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
THEB ~ TFEB - FD Series with Double Skin Evaporator (R22)
THEB ~ TFEB - FD Series with Double Skin Evaporator (R22)
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDOO
R UNIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOR
OUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
TFEB 300FD
TACCS 150F X 2
300,000
87.92
32,700
67.2
9,300
0.8
5.5
1,240
2,3051,410
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
210 (2)
TFEB 350FDTACCS 100F X 1 &
TACCS 125F X 2350,000
102.58
36,470
67.5
10,500
0.8
7.5
1,395
2,3051,360
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 1/8(1) & 1 3/8(2)
175(1) & 190(2)
TFEB 400FDTACCS 125F X 2 &
TACCS 150F X 1400,000
117.23
43,230
83.1
11,500
0.8
10.0
1,495
2,3051,410
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
190(2) & 210(1)
TFEB 500FD
TACCS 125F X 4
500,000
146.54
50,260
92.3
15,000
1.2
10.0
1,495
2,7051,475
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
TFEB 600FD
TACCS 150F X 4
600,000
175.85
68,400
139.2
18,000
1.4
15.0
1,860
2,7551,825
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
210 (4)
TFEB 750FD
TACCS 150F X 5
750,000
219.81
86,750
175.7
22,000
1.4
20.0
2,135
2,7551,865
900 (5)
1,080 (5)
940 (5)
5/8 (5)
1 3/8 (5)
210 (5)
CENTRIFUGAL / BELT DRIVE
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
188 213 300265 496 590
696 776 935 1140 1280 1360
SPECIFICATIONSTHEB ~ TFEB - FD7 Series with Double Skin Evaporator Unit (R407C)
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDO
OR U
NIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOROUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
THEB 80 FD7TACCS 80 F7
80,000
23.45
8,665
17.2
2,600
0.5
1.5
900
1,180
425
1/2
1.0
160
THEB 100 FD7TACCS 100 F7
100,000
29.31
10,665
20.3
3,200
0.5
1.5
900
1,080
940
5/8
1 1/8
175
THEB 125 FD7TACCS 125 F7
125,000
36.64
12,990
24.0
4,300
0.75
3.0
900
1,080
940
5/8
1 3/8
190
THEB 200 FD7TACCS 100 F7 x 2
200,000
58.62
23,080
43.2
6,600
0.75
5.5
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 1/8 (2)
175 (2)
THEB 250 FD7TACCS 125 F7 x 2
250,000
73.27
26,980
49.3
7,800
1.0
7.5
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
190 (2)
CENTRIFUGAL / BELT DRIVE
THEB 150 FD7TACCS 150 F7
150,000
43.96
17,400
36.3
4,600
0.75
4.0
900
1,080
940
5/8
1 3/8
210
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
THEB ~ TFEB - FD7 Series with Double Skin Evaporator Unit (R407C)
8
677
1,226874
777
1,376 872
777
1,576 872
980
1,7751,061
1,000
2,2351,161
980
1,5751,061
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDOO
R UNIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOR
OUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
TFEB 350FD7TACCS 100F X 1 &
TACCS 125F X 2350,000
102.58
36,470
67.5
10,500
0.8
7.5
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 1/8(1) & 1 3/8(2)
175(1) & 190(2)
TFEB 400FD7TACCS 125F X 2 &
TACCS 150F X 1400,000
117.23
43,230
83.1
11,500
0.8
10.0
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
190(2) & 210(1)
TFEB 500FD7
TACCS 125F X 4
500,000
146.54
50,260
92.3
15,000
1.2
10.0
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
TFEB 600FD7
TACCS 150F X 4
600,000
175.85
68,400
139.2
18,000
1.4
15.0
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
210 (4)
TFEB 750FD7
TACCS 150F X 5
750,000
219.81
86,750
175.7
22,000
1.4
20.0
900 (5)
1,080 (5)
940 (5)
5/8 (5)
1 3/8 (5)
210 (5)
CENTRIFUGAL / BELT DRIVE
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
1,395
2,3051,360
1,495
2,3051,410
1,495
2,7051,475
1,860
2,7551,825
2,135
2,7551,865
THEB 300 FD7TACCS 150 F7 x 2
300,000
87.92
32,700
67.2
9300
0.8
5.5
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
210 (2)
1,240
2,3051,410
TFEB 450FD7
TACCS 150F X 3
450,000
131.89
50,260
92.3
14,500
1.0
10.0
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
1,535
2,6551,475
188 213 300265 496 590
776 935 1140 1280 1360
696
1021
9
SPECIFICATIONSTHEB ~ TFEB - FD4 Series with Double Skin Evaporator Unit (R4I0A)
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDO
OR U
NIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOROUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
THEB 80 FD4TACCS 80 F4
80,000
23.45
8,665
17.2
2,600
0.5
1.5
900
1,180
425
1/2
1.0
160
THEB 100 FD4TACCS 100 F4
100,000
29.31
10,665
20.3
3,200
0.5
1.5
900
1,080
940
5/8
1 1/8
175
THEB 125 FD4TACCS 125 F4
125,000
36.64
12,990
24.0
4,300
0.75
3.0
900
1,080
940
5/8
1 3/8
190
THEB 200 FD4TACCS 100 F4 x 2
200,000
58.62
23,080
43.2
6,600
0.75
5.5
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 1/8 (2)
175 (2)
THEB 250 FD4TACCS 125 F4 x 2
250,000
73.27
26,980
49.3
7,800
1.0
7.5
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
190 (2)
CENTRIFUGAL / BELT DRIVE
THEB 150 FD4TACCS 150 F4
150,000
43.96
17,400
36.3
4,600
0.75
4.0
900
1,080
940
5/8
1 3/8
210
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
THEB ~ TFEB - FD4 Series with Double Skin Evaporator Unit (R4I0A)
677
1,226874
777
1,376 872
777
1,576 872
980
1,7751,061
1,000
2,2351,161
980
1,5751,061
AIR FLOW
FAN MOTOR RATED POWER
EVAPORATOR BLOWER
REFRIGERANT CONTROL
COMPRESSOR
CONDENSER FAN
CONDENSER FAN MOTOR
Height
Width
Depth
Type
Type
Type
Height
Width
Depth
Type
Liquid
Gas
NET WEIGHT
MODEL
COOLING CAPACITY
INPUT POWER
RATED CURRENT
POWER SUPPLY
INDOO
R UNIT
EXTERNAL STATIC PRESSURE
UNIT DIMENSION
NET WEIGHT
OUTD
OOR U
NIT
UNIT DIMENSION
PIPE CONNECTION
INDOOR
OUTDOOR
BTU/HR
KW
W
A
V / Ph / Hz
CFM
In.wg
HP
Type/Drive
Type
mm
mm
mm
kg
mm
mm
mm
inch
inch
kg
TFEB 300FD4
TACCS 150F4 X 2
300,000
87.92
32,700
67.2
9,300
0.8
5.5
900 (2)
1,080 (2)
940 (2)
5/8 (2)
1 3/8 (2)
210 (2)
TFEB 350FD4TACCS 100F4 X 1 & TACCS 125F4 X
2350,000
102.58
36,470
67.5
10,500
0.8
7.5
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 1/8(1) & 1 3/8(2)
175(1) & 190(2)
TFEB 400FD4TACCS 125F4 X 2 & TACCS 150F4 X
1400,000
117.23
43,230
83.1
11,500
0.8
10.0
900 (3)
1,080 (3)
940 (3)
5/8 (3)
1 3/8 (3)
190(2) & 210(1)
TFEB 500FD4
TACCS 125F4 X 4
500,000
146.54
50,260
92.3
15,000
1.2
10.0
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
190 (4)
TFEB 600FD4
TACCS 150F4 X 4
600,000
175.85
68,400
139.2
18,000
1.4
15.0
900 (4)
1,080 (4)
940 (4)
5/8 (4)
1 3/8 (4)
210 (4)
TFEB 750FD4
TACCS 150F4 X 5
750,000
219.81
86,750
175.7
22,000
1.4
20.0
900 (5)
1,080 (5)
940 (5)
5/8 (5)
1 3/8 (5)
210 (5)
CENTRIFUGAL / BELT DRIVE
380 - 415 / 3 / 50
THERMOSTATIC EXPANSION VALVE (TXV)
HERMETIC SCROLL
PROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
1,240
2,3051,410
1,395
2,3051,360
1,495
2,3051,410
1,495
2,7051,475
1,860
2,7551,825
2,135
2,7551,865
188 213 300265 496 590
696 776 935 1140 1280 1360
PRODUCT LINE UP 22R
SPECIFICATIONS
lll M e d o : TFS 80 F ~ TFS 100 F(SINGLE SKIN )
Centrifugal fan for stronger air throw & better air circulation. Anti-mold & durable washable saran net air filter.Built in Electronic Controller complete with auto restart function and wireless remote control. (For model TFS 80 F & TFS 100 F only.)
LCD DISPLAY PANEL
lll M e d o : TVEB 145 DFB ~ TVEB 220 DFB(SINGLE SKIN )
Centrifugal fan for stronger air throw & better air circulation. Anti-mold & durable washable 1” thick air filter. Belt driven drive packaged. (Standard unit do not include Controller & Thermostat.)
Standard Wireless Remote Controller
FEATURES FEATURES
AIR FLOWFAN MOTOR RATED POWEREVAPORATOR BLOWERREFRIGERANT CONTROL
COMPRESSORCONDENSER FANCONDENSER FAN MOTOR
HeightWidthDepth
TypeTypeType
HeightWidthDepthType
LiquidGas
NET WEIGHT
INDOOR
OUTDOORBTU/HR
KWWA
V / Ph / HzCFMHP
Type/DriveTypemmmmmmkg
mmmmmm
inchinchkg
MODEL
COOLING CAPACITY
INPUT POWERRATED CURRENTPOWER SUPPLY
IND
OO
R UN
IT
UNIT DIMENSION
NET WEIGHT
OU
TDO
OR
UN
IT
UNIT DIMENSION
PIPE CONNECTION
TFS 80F
TACCS 80F80,00023.458,04017.1
2,5001.0
1,8601,200420130
9001,180425
1/21.0160
TFS 100F
TACCS 100F100,000
29.3110,290
20.4
2,8001.0
1,8601,200420140
9001,080940
5/81 1/8175
380 - 415 / 3 / 50
HERMETIC SCROLLPROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
THERMOSTATIC EXPANSION VALVE (TXV)CENTRIFUGAL / BELT DRIVE
CAPILLARY AT INDOOR UNITCENTRIFUGAL / DIRECT
TVEB 145 DFB
TACCS 125F125,000
36.6411,810
21.7
4,0001.5
2,0571,549610235
9001,080940
5/81 3/8190
TVEB 160 DFB
TACCS 150F150,000
43.9615,842
32.5
4,6002.0
2,1841,549762278
9001,080940
5/81 3/8210
TVEB 220 DFB
TACCS 100F X 2200,000
58.6220,672
38.1
5,4002.0
2,1841,829762296
900 (2)1,080 (2)940 (2)
5/8 (2)1 1/8 (2)175 (2)
AIR FLOWFAN MOTOR RATED POWEREVAPORATOR BLOWERREFRIGERANT CONTROL
COMPRESSORCONDENSER FANCONDENSER FAN MOTOR
HeightWidthDepth
TypeTypeType
HeightWidthDepthType
LiquidGas
NET WEIGHT
INDOOR
OUTDOORBTU/HR
KWWA
V / Ph / HzCFMHP
Type/DriveTypemmmmmmkg
mmmmmm
inchinchkg
MODEL
COOLING CAPACITY
INPUT POWERRATED CURRENTPOWER SUPPLY
IND
OO
R UN
IT
UNIT DIMENSION
NET WEIGHT
OU
TDO
OR
UN
IT
UNIT DIMENSION
PIPE CONNECTION
TFS 80F7
TACCS 80F780,00023.458,24017.5
2,5001.0
1,8601,200420130
9001,180425
1/21.0160
TFS 100F7
TACCS 100F7100,000
29.3110,240
20.6
2,8001.0
1,8601,200420140
9001,080940
5/81 1/8175
380 - 415 / 3 / 50
HERMETIC SCROLLPROPELLER / DIRECT
PSC INDUCTION , IP54, CLASS F
BRAZED
THERMOSTATIC EXPANSION VALVE (TXV)CENTRIFUGAL / BELT DRIVE
CAPILLARY AT INDOOR UNITCENTRIFUGAL / DIRECT
TVEB 145 DFBP
TACCS 125F7125,000
36.6411,860
21.8
4,0001.5
2,0571,549610235
9001,080940
5/81 3/8190
TVEB 160 DFBP
TACCS 150F7150,000
43.9615,892
33.4
4,6002.0
2,1841,549762278
9001,080940
5/81 3/8210
TVEB 220 DFBP
TACCS 100F7 X 2200,000
58.6220,572
38.5
5,4002.0
2,1841,829762296
900 (2)1,080 (2)940 (2)
5/8 (2)1 1/8 (2)175 (2)
ALL specifications are subject to change by manufacturer without prior notice.Note : The nominal cooling capacity is based on condenser outdoor air entering temp. 350C (DB); indoor on coil temp. 27/190C ( DB / WB )
10
SINGLE SKIN FLOOR STANDING FREE BLOW EVAPORATOR UNITS (R22)
SINGLE SKIN FLOOR STANDING FREE BLOW EVAPORATOR UNITS (R407C)
No.
T: 03-90563228 l F: 03-90562800 l E: [email protected] W: www.topaire.com.my
TOPAIRE Sales & Services Sdn Bhd (274725-W)
A7-2-2, Block A, Megan Salak Park, Jalan 2/125 E, Taman Desa Petaling, 57100 Kuala Lumpur, Malaysia.
ACPU.R22.R407C.R410A / 0617
ed w
ith So
y Ink