5AIR PRESSURED SYSTEM
AIR COMPRESSORMINI and PISTON AIR COMPRESSOR
Article KW1200335 10080977
Description Portable Air Compressor 1/4HP with Spraykit Airbrush Compressor Twin Cylinder
Specification
Power (HP) ¼ ¼
Voltage (V/Ph) 220 / 1 220 / 1
Frequency (Hz) 50 50
Auto Stop (Bar / Psi) - 4 / 57
Auto Start (Bar / Psi) - 3 / 43
Max Pressure (Bar / Psi) 3.2 / 45 6 / 86
Air Flow (L / min) 65 – 68 35 – 40
Tank (L) - 3.5
Dimension (L x W x H) (cm) 27 x 13.6 x 34.5 35 x 13.5 x 31
Weight (kg) 5.5 7.5
KW1200335
Application KW1200335 :• Home Decorating : Spraying on wall, fence, furniture, toy, craftwork, and so on.• Inflating car tyre, motorcycle, and all kinds of balls.• Spraying pesticide, sterilizing, and photo catalyst.• It also can be used for providing air source for medical, environment protect breed aquatics industrial, chemical industrial, laboratory and so on.
10080977
DIRECT DRIVEN OILESS
Features 10080977:• Air tank, providing smooth air flow, zero pulse.• Twin cylinder, supply high air flow for many airbrushes.• Oil free, piston type; No air polluted.• With water filter, pressure adjustor and pressure gauge.• Double air pressure switch. Switch 1, low pressure switch, for airbrush purpose. Switch 2, high pressure switch, for other high pressure air tools.• Auto release air pressure function, start without any pressure, prolong the motor life. • Can operate with small air nailer tools, spray gun• low noise,47db
10118500 10118501
Article 10118500 10118501
Description Compressor 1.5HP 5L 10Bar 1PH Oilfree FN Compressor 2HP 6L 8Bar 1PH Set Oilfree FN
Specification
Power (HP/kW) 1.5 / 1.1 2 / 1.5
Voltage (V/Ph) 220/1
Frequency (Hz) 50
Maximum Air DisplacementL/min 180 220
CFM 6.4 7.7
Working Pressure (bar/psi) 10 /145 8/115
Rotate Speed of Air Compressor (rpm) 3400 3200
Tank Volume (l) 5 6
Packing Dimension (L x W x H) (cm) 43 x 21 x 39 45 x 35 x 54
Weight (kg) 10 15
Features 1018500:• Ideal for all domestic jobs• Simple control panel• Shoulder belt for easy transport• Storage box for accessories• Easy to store
Features 1018501:• Transportable thanks to pull-out handle• 2 regulated air outputs• Large easy-to-read gauge• Ergonomic pressure adjustment regulator• Rear storage space for accessories• Small built-in needle box• Complete with 6-piece kit
AIR PRESSURED SYSTEM6
BELT DRIVEN (8BAR)
Article 10073150Description Compressor 2HP, 40ℓ, 8bar Italian DesignSpecification
Power (HP/kW) 2 / 1.5
Voltage (V/Ph) 220 / 1
Frequenzy (Hz) 50
Maximum Air Displacement ℓ/min 165-235
Working Pressure (bar (psi)) 8/116
Cylinder (Ømm x piece) 60
Rotate Speed of Air Compressor (rpm) 1.040
Tank Volume (ℓ) 40
Packing Dimension ( L x W x H ) (cm) 75 x 35 x 70
Weight (kg) 50
Inflating Painting Service
Application :
Application :• Small and medium workshop , paintingFeatures :• Finger protection on driven protector• Steel case sight glass• 100% copper winding induction motor
AIR COMPRESSOR
10118502
DIRECT DRIVEN LUBRICATED
Features :• Using oil as lubricant and coolant engine• With pressure switch• Integrated motor and engine pump• Easy transportable• Double Tank 10 + 10L (10118502)
KW1300467 KW1300924
Article No. KW1300467 KW1300924 10118502
Description Compressor 1HP, 8ℓ, 8bar, 1Ph Direct Driven
Compressor 2HP, 24ℓ, 8bar, 1Ph Direct Driven
Compressor 2.5HP 10+10L 10Bar 1PH Direct FN
Specification
Power (HP/kW) 1/0.75 2/1.5 2.5 / 1.8
Voltage (V/Ph) 220/1
Frequency (Hz) 50
Maximum Air Displacementℓ/min 150 195 250CFM 5.3 7 8.8
Working Pressure (bar (psi)) 8 (115) 10/145Rotate Speed of Air Compressor (rpm) 2850Tank Volume (ℓ) 8 24 10 + 10Packing Dimension (L x W x H) (cm) 51 x 22.5 x 45 62.5 x 29 x 25 72 x 66 x 52
Weight (kg) 15.5 26 41
7AIR PRESSURED SYSTEM
AIR COMPRESSORBELT DRIVEN ONE STAGE (8 - 10 BAR)
Article No. 10029556 10029557 10029558 10029559
Description Compressor 3/4HP, 30ℓ, 8bar, 220V, 1Ph
Compressor 1HP, 60ℓ, 10bar, 220V, 1Ph
Compressor 2HP, 90ℓ, 10bar, 220V, 1Ph
Compressor 3HP, 120ℓ, 10bar, 220V, 1Ph
Specification
Power (HP/kW) 3/4 / 0.55 1 / 0.75 2 / 1.5 3 / 2.2
Voltage (V/Ph) 220 / 1
Frequenzy (Hz) 50
Maximum Air Displacementℓ/min 36 80 170 250
CFM 1.27 2.83 6 8,8
Working Pressure (bar (psi)) 8 (115 ) 10 (145)
Cylinder (Ømm x piece) 51 x 1 65 x 1 51 x 2 65 x 2
Rotate Speed of Air Compressor (rpm) 932 950
Tank Volume (ℓ) 30 60 90 120
Packing Dimension ( L x W x H ) (cm) 81 x 41 x 64 97 x 45 x 82 105 x 50 x 84 131 x 53 x 87
Weight (kg) 41 80 97 127
Application :• Small and medium workshop , paintingFeatures :• Adjustable belt tension > 2HP • Steel case of air filter• Finger protection on driven protector• Tank inspection hole EURO standard• Steel case sight glass• 100% copper winding induction motor
1002955810029557
BELT DRIVEN ONE STAGE (10 BAR)
Article No. 10029560 10029561 10029562 10029563
Description Compressor 3HP, 120ℓ, 10bar, 380V, 3Ph
Compressor 5.5HP, 340ℓ, 10bar, 380V, 3Ph
Compressor 7.5HP, 420ℓ, 10bar, 380V, 3Ph
Compressor 10HP, 520ℓ, 10bar, 380V, 3Ph
Specification
Power (HP/kW) 3 / 2.2 5.5 / 4 7.5 / 5.5 10 / 7.5
Voltage (V/Ph) 380 / 3
Frequenzy (Hz) 50
Maximum Air Displacementℓ/min 250 480 670 900
CFM 8.8 17 23.6 31.8
Working Pressure (bar (psi)) 10 (145)
Cylinder (Ømm x piece) 65 x 2 80 x 2 80 x 3 90 x 3
Rotate Speed of Air Compressor (rpm) 950 847 924 809
Tank Volume (ℓ) 120 340 420 520
Packing Dimension ( L x W x H ) (cm) 131 x 53 x 87 184 x 74 x 120 186 x 80 x 135 205 x 90 x 145
Weight (kg) 127 380 430 500
Application :• Workshop , IndustryFeatures :• Adjustable belt tension• Steel case of air filter• Finger protection on driven protector• Tank inspection hole EURO standard• Steel case sight glass• 100% copper winding induction motor
1002956310029560
AIR PRESSURED SYSTEM8
AIR COMPRESSORBELT DRIVEN TWO STAGE (12 BAR)
Article No. 10029613 10029564 10029565 10029566
Description Compressor 3HP, 120ℓ, 12bar, 380V, 3Ph
Compressor 5.5HP, 340ℓ, 12bar, 380V, 3Ph
Compressor 7.5HP, 420ℓ, 12bar, 380V, 3Ph
Compressor 10HP, 520ℓ, 12bar, 380V, 3Ph
Specification
Power (HP/kW) 3 / 2.2 5.5 / 4 7.5 / 5.5 10 / 7.5
Voltage (V/Ph) 380 / 3
Frequenzy (Hz) 50
Maximum Air Displacementℓ/min 200 400 600 800
CFM 7 14.1 21.2 28.2
Working Pressure (bar (psi)) 12 (176)
Cylinder (Ømm x piece) 65 x 1 / 51 x 1 80 x 2 / 65 x 1 80 x 2 / 65 x 1 90 x 2 / 80 x 1
Rotate Speed of Air Compressor (rpm) 950 847 924 824
Tank Volume (ℓ) 120 340 420 520
Packing Dimension ( L x W x H ) (cm) 131 x 53 x 87 184 x 74 x 120 186 x 80 x 135 205 x 90 x 145
Weight (kg) 127 380 430 500
Application :• For Hydraulic Pneumatic Equipment,Workshop,IndustryFeatures :• Adjustable belt tension• Steel case of air filter• Finger protection on driven protector• Tank inspection hole EURO standard• Steel case sight glass• 100% copper winding induction motor
10029566
BELT DRIVEN WITH GASOLINE and DIESEL ENGINE (12 BAR)
Article 10050366 10050367 10050368 10050369
Description Compressor 3HP 120L 12Bar Gasoline
Compressor 3HP 120L 12Bar Diesel
Compressor 5.5HP 340L 12Bar Diesel
Compressor 7.5HP 420L 12Bar Diesel
Compressor Power (HP/kW) 2.2/3 4/5.5 5.5/7.5Piston Variable Displacement (ℓ/ menit) 200 400 600Working Pressure (Bar/Psi) 12/173Cylinder (Ømm x piece) 65 x 1 / 51 x 1 90 x 1 / 65 x 1 80 x 2/65 x 1Rotate Speed of Air Compressor (rpm) 1050 800Tank Volume (ℓ) 120 340 420Packing Dimension (L x W x H) (cm) 130 x 51 x 93 130 x 51 x 109 189 x 66 x 133 198 x 66 x 138Weight (kg) 125 145 285 330Engine
TypeSingle Cylinder 4 stroke,
Air-cooled, OHV, 25 Inclined, horizontal axis
Single Cylinder, Vertical, Air Cooled, 4 Stroke Direct
Injection
Single Cylinder, Vertical, Air Cooled, 4 Stroke Direct
Injection
Single Cylinder, Vertical, Air Cooled, 4 Stroke Direct
InjectionRated Power (kW/rpm) 6.5/3600 4/3600 6.3/3600 7.35/3600Fuel Tank Capacity (ℓ) 3.6 3.5 5.5Fuel Consumption (g/kWh) ≤375g/kW.h 285.6/3600 281.5/3600 279/3600Lube Oil Capacity / Oil Type (ℓ) 0.6 / SAE 20W-50 1.1 / SAE 10W-30 15W-40 1.65 / SAE 10W-30 15W-40Starting System Recoil Electric Starter and Recoil
Application :• For industry, workshop and
project that have no electrical poweFeatures :• Portable with gasoline and
diesel engine10050366 10050367/ 10050368 10050369
9AIR PRESSURED SYSTEM
AIR COMPRESSORSCREW COMPRESSOR
Article DeskripsiMotor Power Air Delivery Working
PressureNoise Level Connection Weight Dimension
kW HP l/min. m³/h c.f.m. bar p.s.i. dB(A) G kg L x W x H (cm)10038337 Screw Compressor 10HP 10 BAR 3PH 7.5 10 1000 60 36.3 10 145 68 3/4" 185 80 x 65 x 9810038339 Screw Compressor 20HP 10 BAR 3PH 15 20 2050 123 72.4 10 145 68 3/4" 240 80 x 65 x 9810114856 Screw Compressor 40HP 10 BAR 3PH 30 40 3900 234 137.7 10 145 75 3/4" 412 110 x 71 x 110
Air-ends Intake-valve
Axial fanSupplies the optimum cooling air flow for the generously sized air/oil cooler:safe operation in any environmental condition with minimum noise level.
Minimum pressure valveBuilt in house with oxide free material, fully machined. A sharp technical choice to grant maximum reliability in any operational conditions.
ETMII electronic controller
100% Designed & Made In Italy
Controller with multi-function backlight display the menu is alphanumeric type.In the main screen are displayed:• Working pressure (offload and load pressure) • Oil temperature • Total working time • On-load working time• Compressor status led (stand-by, offload, load)• Hours remaining to maintenance
10114856
10038337/1038339
MADE IN ITALY
All models in the range have the following benefits in common, which are typical of screw technology :• High volumetric yield The free air delivered from our hi-efficiency air-ends
contributes to lower energy consumption and therefore significant savings.• Reliability The low speed of the air-end guarantees minimal
wear and long durability.• Suitable for intense and non-stop operation 24hrs without perfomance drop.• Low noise levels This means the operator can install the compressor near the workstation.• Easy maintenance Krisbow screw compressor are built with an empha-
sis on making routine maintenance tasks simple and com-
ponents easily accessible. Compact design means reduced
dimensions
Article DescriptionMotor Power Air Delivery Working
PressureNoise Level Connection Tank
Capacity Weight Dimension
kW HP l/min m³/h c.f.m bar psi dB(A) G L kg cm10114857 Screw Compressor 500L ES 10HP 10 BAR 3PH 7.5 10 1000 60 35.3 10 145 68 3/4" 500 375 198x65x16310114868 Screw Compressor 500L ES 20HP 10 BAR 3PH 15 20 2050 123 72.4 10 145 68 3/4" 500 436 198x65x163
10114857/10114868
AIR PRESSURED SYSTEM10
AB
C
Article 10035964 10035965 10035966
Description Air Dryer 7.5HP, 35CFM, 220V, 50Hz, 1Ph
Air Dryer 10HP, 53CFM, 220V, 50Hz, 1Ph
Air Dryer 20HP, 88CFM, 220V, 50Hz, 1Ph
Specification
Processing Air Volume l/min 1000 1500 2500CFM 35 53 88
Meet to Air Compressor for Capacity HP 7.5 10 20
Limit of Utilization Conditions1. Inlet temperature 80°C
2. Ambient temperature 45°C3. Air pressure 1.0 Mpa (10bar) (High pressure systems available)
Pressure Dew-point 2 ~ 5°C (equal to air dew-point 20°C)Refrigerant R134aPower AC220V/50Hz 1PhaseRefrigerant Compressor Motor HP 1/2 1/2 3/4Diameter of Air Entry and Exit Tube 3/4 “ 1 ” 1½”
Packing DimensionHeight cm 71 76Width cm 42Long cm 70
Weight kg 35 40 60
Features :• Excellent Properties of KRISBOW Series of Dryers :• High temperature in the inlet:The post cooler and precooler can allow air below 80C to enter. • High capacity of freezing: It is equipped with large horse power refrigerant compressor that can make fully cooling before
refrigerating, the wind quantity of which is larger by 30% than the products of the kind. In addition, the temperature of the dew point is steady, which will make 99% vapor change into dew drops.
• Excellent drainage: The efficiency of the supper centrifugal and current-collecting double water separator prevails over99%.
• High quality: The world famous high quality parts and fittings with long life-span are adopted. • Nice appearance and easy application: No consumables, full-automatic drainage and manual drainage make a low working
cost. The continuous working is reliable.• R134a Refrigerant (Environmentally friendly)
10035964
AIR DRYER
AIR DRYER, AIR STORAGE TANK and AIR FILTER
Features :• The design and manufacture strictly in accordance with GB150-1998 standard. The made of the adopted steel plate is
canonical. The whole body is rolled by numerical control plate bending machine. The full automatic gas shielded welding technique makes the container of standard technology and
high quality. • Both the inside and outside of the tank are blasted and rust removed by high speed air flow, with best surface quality and serviceability. All the products pass the flaw detection by x ray to make sure safety and performance. • Equipped also : pressure gauge, ball valve for drainage purpose, safety valve
Article No. Description Volume (m3 / ℓ)
Working Pressure (bar / psi)
Tank Size dia. x high (mm)
Connector Size
Weight (kg)
10010420 Air Storage Tank 1.0m3/12kgf/cm2 1 (1000) 12 (176) 800 x 2411 1½ 250
AIR STORAGE TANK
AIR FILTER
Function : Filtering the air to make the oil gas content less than 5ppm and the granules
inclusion content less than 5MICRON.
Article No. DescriptionAir Flow
7.F.A.D20°C
Maximum Working Pressure
Filter Cartridge
Dimension (cm) Weight(Kg)
M³ / min CFM BAR A B C
10035967 Air Filter and Cartridge 24CFM 5Micron 5PPM 0.7 24.7 16 1 x 007 26.7 24.3 8.9 1.1
10035968 Air Filter and Cartridge 53CFM 5Micron 5PPM 1.5 53.0 16 1 x 015 26.7 24.3 8.9 1.1
10035969 Air Filter and Cartridge 84CFM 5Micron 5PPM 2.4 84.7 16 1 x 024 51.3 31 10.9 2.2
11AIR PRESSURED SYSTEM
AIR FILTER REGULATOR - LUBRICATOR with GAUGE
Article No. KW0800292 KW0800293 KW0800294 KW0800295
DescriptionFilter Regulator Lubricator Metal
Guard + PC Bowl with Gauge 1/4”
Filter Regulator Lubricator Metal
Bowl with Gauge 1/2”
Filter Regulator Lubricator Metal
Bowl with Gauge 3/4”
Filter Regulator LubricatorMetal Bowl
with Gauge 1”
Specification Port Size (inch) 1/4 1/2 3/4 1Adj. Pressure Range (bar) 10
Max. Service Pressure (bar) 15Max. Flow (ℓ/min) 1750 4000 5200
Operating Temp Range (oC) 5 ~ 80
Drain Capacity (ml) 80 (manual) 160 (manual) 350 (manual)
Filter Element (μ) 5
Weight (kg) 2.2 3.5 3.8 4.1
4
12
3
Air System Layout1. Air Compressor2. Air Dryer3. Filter Regulator Lubricator4. Air Tools
KW0800293-KW0800294KW0800292 KW0800295
Filter Regulator
ConnectorSupport
Lubricator
ConnectorSupport
Article No. KW0800289 KW0800290 KW0800291
DescriptionFilter
Regulator Metal Guard + PC Bowl 1/4”
FilterRegulator Metal Bowl 1/2”
FilterRegulator Metal Bowl 3/4”
Specification Port Size (inch) 1/4 1/2 3/4Adj. Pressure Range (bar) 10 15Max. Service Pressure (bar) 15 20Max. Flow (ℓ/min) 1750 4000Operating Temp Range (oC) 5 ~ 80Drain Capacity (mℓ) 80 (manual) 160 (manual)Filter Element (μ) 5Weight (kg) 1 1.2 1.4
KW0800289 KW0800290KW0800291
AIR FILTER REGULATOR with GAUGE
AIR CLEANER DRYER
Article No. KW0800634
Description Air Cleaner Dryer 3/8” + 1/4” Fitting
SpecificationPort Size PT, NPT (inch) 3/8Filter Element (μ) 0.01Max. Service Pressure (bar) 10.2Max. Flow (ℓ/min) 3000Operating Temperature Range (oC) 5 ~ 60Drain Capacity (mℓ) 80Weight (kg) 1.9
Article No. KW0800635Description Dessicant f/ KW0800634SpecificationWeight (g) 100
Optional Accessories :Dessicant for KW0800634
AIR FILTER and AIR CLEANER DRYER
AIR PRESSURED SYSTEM12
AIR QUICK COUPLER and MULTIPASS QUICK COUPLER
Article No. Description TypeKW0800636 Air Quick Coupler 1/4” JT-SH 20KW0800637 Air Quick Coupler 3/8” JT-SH 30KW0800638 Air Quick Coupler 1/2” JT-SH 40KW0800639 Air Quick Coupler 1/4” JT-SM 20KW0800640 Air Quick Coupler 3/8” JT-SM 30KW0800641 Air Quick Coupler 1/2” JT-SM 40KW0800642 Air Quick Coupler 1/4” JT-SF 20KW0800643 Air Quick Coupler 3/8” JT-SF 30KW0800644 Air Quick Coupler 1/2” JT-SF 40KW0800645 Air Quick Coupler 1/4” JT-SP 20KW0800646 Air Quick Coupler 3/8” JT-SP 30KW0800647 Air Quick Coupler 1/2” JT-SP 40
Article No. Description TypeKW0800048 Air Quick Plug 1/4” PH 20KW0800049 Air Quick Plug 3/8” PH 30KW0800050 Air Quick Plug 1/2” PH 40KW0800051 Air Quick Plug 1/4” PM 20KW0800052 Air Quick Plug 3/8” PM 30KW0800053 Air Quick Plug 1/2” PM 40KW0800054 Air Quick Plug 1/4” PF 20KW0800055 Air Quick Plug 3/8” PF 30KW0800056 Air Quick Plug 1/2” PF 40KW0800057 Air Quick Plug 1/4” PP 20KW0800058 Air Quick Plug 3/8” PP 30KW0800059 Air Quick Plug 1/2” PP 40
Type for hosesSH 20-1/4”SH 30-3/8”SH 40-1/2”
Type for piping, male threadSM 20-1/4”SM 30-3/8”SM 40-1/2”
Type for piping, female threadSF 20-1/4”SF 30-3/8”SF 40-1/2”
Type for hosesSP 20-1/4”SP 30-3/8”SP 40-1/2”
Type for hosesPH 20-1/4”PH 30-3/8”PH 40-1/2”
Type for piping, male threadPM 20-1/4”PM 30-3/8”PM 40-1/2”
Type for piping, female threadPF 20-1/4”PF 30-3/8”PF 40-1/2”
Type for hosesPP 20-1/4”PP 30-3/8”PP 40-1/2”
Material : Stainless steel
Article No. Description TypeKW0800659 QC-3F Multipass Quick Coupler, F¼” 3 Couplers JT-3F20KW0800660 QC-3J Multipass Quick Coupler, F¼” 3 Couplers in line JT-3J20KW0800661 QC-4J Multipass Quick Coupler, F¼” 4 Couplers in line JT-4J20
3 Couplers 3 Couplers inline 4 Couplers inline
Material : Stainless steel + Aluminium alloy
ACCESSORIES
1. Screw Compressor2. Air Storage Tank3. Air Filter4. Air Dryer5. Air Cleaner Dryer1
2
33
4
5