www.balaguer-rolls-com
Facebook Twitter Youtube Linkedin
The double sandblasting nozzle achieves a faster and cleaner sandblasting process.
Fine separation cyclone-filter to provide a regular grain size and achive a more homogeneus superficial finishing and roughness (Ra±0.25µ)
Full automatic PLC control and easy and fast roll change and operation by intuitive color touch panel.
Tailored for roll sizes according to customer (range from Ø200 up to Ø400mm and variable length between 100 and 3000mm and up to 2.000 kg).
Less compressed air consumption with double nozzle.
High Quality Tecnology for Milling Industry
Sandblasting MachineBR-SM18
TECHNICAL SPECIFICATIONS
Dimensions mm Weight Roll Diameter Range Roll Length RangeAir Pressure
RequiredTotal Power Air
Consumption
3200x1600x1670
w kg mm
200-400
inch mm inch bar psiKwPhase m/min
1,2 m³/min 42 ft³/min 4 58
ftCv
8´´-15´´ 100-3000 4´´-118´´ 3,4 Kw 4,6 Cv1060
hl
·FULL AUTOMATIC PLC CONTROLFull automatic PLC control and easy and fast roll change and operation by intuitive color touch panel.
·FINEST GRAINS SEPARATIONMore homogeneus (Ra±0.25µ) roughness and sandblasting is obtained by separating the finer grains. Therefore a constant uniformity regarding the grain size is guaranteed during the process.
·LOW COST-EFFECTIVE PROCESSCompressed air consumption thanks to the venturi system of the double sandblasting nozzle and the suction system with hopper and filter.
www.balaguer-rolls-com
Facebook Twitter Youtube Linkedin
Sandblasting MachineBR-SM18
High Quality Tecnology for Milling Industry