Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 1
Application for registration, transfer or variation of a colliery holding Form AD15, Mining Act 1992
Lodgement information For help with lodging this application, or for more information
about authorisations in New South Wales, contact:
Mining, Exploration and Geoscience
Resource Operations
Phone +61 2 4063 6600 (8.30am – 4.30pm)
Note
• any reference to the ‘Department’ in this form, refers to Regional NSW
How to submit this form
• By email: Send an electronic copy of the form including any attachments to
• By mail: Mail your form and any attachments to Mining, Exploration and Geoscience, Resource Operations, PO Box
344, Hunter Region Mail Centre NSW 2310
• In person: Submit your application in person at the Department office, 516 High Street, Maitland, New South Wales.
Office hours are 8.30am to 4.30pm
• Facsimile: +61 2 4063 6973
© State of New South Wales through Regional NSW. ABN: 19 948 325 463
This publication is copyright. You may download, display, print and reproduce this material providing that the wording is reproduced exactly, the source is acknowledged, and the copyright, update address and disclaimer notice are retained.
The information contained in this publication is based on knowledge and understanding at the time of writing (July 2020). However,because of advances in knowledge, users are reminded of the need to ensure that the information upon which they rely is up to date and to check the currency of the information with the appropriate officer of the Regional NSW or the user’s independent adviser.
Privacy statement
This information is collected by the Department for the purposes of assessing an application for an authorisation or an application associated with an authority as required by the Mining Act 1992 or Mining Regulation 2016.
This information may also be used by the Department to confirm applicant details in the event that subsequent applications are made and may also be used to establish and maintain databases to assist the Department with its work generally.
Except for purposes required by law, the information will not be accessed by any third parties in a way that would identify the person without the consent of that person.
You may apply to the Department to access and correct any information the Department holds if that information is inaccurate, incomplete, not relevant or out of date.
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 2
When to use this form Complete this form to if you are:
• a holder of a mining lease or registered mining sublease that authorises you to mine for coal, or to carry out ancillary mining activities in connection with the mining of coal, and you are registering the mining area or sublease area as a colliery holding or to record it on the public register as part of an existing colliery holding before commencing mining operations under the lease or sublease; or
• a person who is lawfully carrying out ancillary mining activities on land in connection with the mining of coal (and doing so otherwise than as the holder of a mining lease or registered mining sublease) and you wish to have the land registered as a colliery holding or recorded on the public register as part of an existing colliery holding; or
• a person who has an interest in a registered colliery holding and you wish to amend or cancel the colliery holding registration.
This form has been prepared for the purposes of s163 the Mining Act 1992.
If there is insufficient room in the fields, please provide the information as an attachment.
Important notes
Agents
If this application is lodged by an agent on behalf of the applicant/s, the Department may seek confirmation of the authority under which the agent operates and any limits of that authority. The agent will need to complete the declaration at the end of this form and supply evidence of their appointment, if not already supplied to the Department (cl97 of the Mining Regulation 2016).
How to submit this form
Refer to the cover page for details.
Next steps
Within 14 days after an application is lodged with the Secretary, the Minister will either grant the application and cause the register to be updated or refuse the application on any of the following grounds:
• the application does not comply with the requirements of the Mining Act 1992, and/or
• if the application is for registration of a holding or with respect to the name of a holding - the name proposed for the holding may cause confusion (because, for example, it is the same as or similar to a name that is or was used for another holding, whether registered or not).
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 3
1 Applicant/s details Provide the full name of applicant/s, contact details and if applicable, the ACN or ARBN (for foreign companies).
1st Applicant details
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
2nd Applicant details
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
Additional applicants
Provide the full name, contact details, ACN or ARBN (for foreign companies), street address (individual), registered street address (company) and postal address details of additional applicants.
Additional applicants
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 4
2 Contact for this request Any correspondence in relation to this request will be sent to this person.
Contact details
Contact name
Position held
Company
Postal address
Phone (incl area code)
Mobile
Your preferred contact method
Email (for companies – provide a company email address which is regularly monitored rather than an individual employee’s email address)
Mail (including DX)
3 Information relating to this application
3.1 Authority information
Provide the details of any mining lease or registered mining sublease associated with this application that authorises the mining of coal and/or the carrying out of ancillary mining activities in connection with coal mining.
Type Number Act Expiry date
Other mining lease/s or registered mining sublease/s
If there is inadequate space above, provide details of any other mining lease/s or registered mining sublease/s associated with this application. If there is insufficient space in the section below, provide the details as an
attachment.
4 Register a colliery holding I am applying to register a colliery holding
No – go to section 5
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 5
Yes
4.1 Proposed colliery holding name
Prior to proposing a name of a colliery, it is advised that you discuss the proposed name with the Department.
Yes – I have discussed the proposed name with the Department
Proposed name of the colliery holding
4.2 Persons with an interest in the proposed colliery holding
Provide the full name, contact details and if applicable, the ACN or ARBN (for foreign companies), of all persons with an interest in the proposed colliery holding.
1st Person with an interest
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
Details of interest
2nd Person with an interest
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
Details of interest
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 6
Additional persons with an interest in the proposed colliery holding
Provide the full name, contact details, ACN or ARBN (for foreign companies), street address (individual), registered street address (company) and postal address details of additional interest holders and the details of any interest.
Additional persons with an interest
4.3 Standard map of the proposed colliery holding
Provide a map as described in cl9 of the Mining Regulation 2016, showing the alignment of the proposed colliery holding boundaries relative to the Map Grid of Australia coordinates of all the points where there is a change in direction of the boundaries of the land. If a boundary map is not available, you may provide a cadastral map and, if this is not available, an aerial photograph, satellite image or topographic map of suitable quality.
I have attached a standard map
I have inserted my standard map below:
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 7
4.4 Coordinates of the proposed colliery holding compliant with Map Grid of Australia (MGA94)
Attach the MGA94 coordinates as a separate electronic file in a CSV format.
I have attached the MGA94 coordinates to this application
4.5 Area of the proposed colliery holding
Area of the proposed colliery holding
Total area m2 ha km2
Surface area m2 ha km2
4.6 Area of each mining lease within the proposed colliery holding
Note: Where the colliery is over a part of a mining lease, only include that area of the mining lease subject to the colliery.
1st Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
2nd Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
3rd Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
4th Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
Additional mining leases
If there is insufficient space above, provide the total area and total surface area of any additional mining leases/part leases within the proposed colliery holding.
Additional mining leases
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 8
5 Transfer or Variation of an existing colliery holding I am applying to transfer or vary an existing colliery holding
No – go to section 8
Yes
5.1 Current colliery holding name
Provide the current name of the colliery holding:
Current name
5.2 Standard map of the existing colliery holding
Provide a map as described in cl9 of the Mining Regulation 2016, showing the alignment of the existing colliery holding boundaries relative to the Map Grid of Australia coordinates of all the points where there is a change in direction of the boundaries of the land. If a boundary map is not available, you may provide a cadastral map and, if this is not available, an aerial photograph, satellite image or topographic map of suitable quality.
I have attached a standard map
I have inserted my standard map below:
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 9
5.3 Coordinates of the existing colliery holding compliant with Map Grid of Australia (MGA94)
Attach the MGA94 coordinates as a separate electronic file in a CSV format.
I have attached the MGA94 coordinates to this application
5.4 Area of the existing colliery holding
Area of the existing colliery holding
Total area m2 ha km2
Surface area m2 ha km2
5.5 Area of each mining lease within the existing colliery holding
Note: Where the colliery is over a part of a mining lease, only include that area of the mining lease subject to the colliery.
1st Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
2nd Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
3rd Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
4th Area of mining lease
Mining lease Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
Additional mining leases
If there is insufficient space above, provide the total area and total surface area of any additional mining leases/part leases within the existing colliery holding.
Additional authorities
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 10
5.6 Persons with an interest in the existing colliery holding
1st Person with an interest
Name
ACN / ARBN
Contact phone
Contact email
Street address (Registered street address for a company)
Postal address Same as above
Details of interest
2nd Person with an interest
Name
ACN / ARBN
Contact phone
Contact email
Street address (Registered street address for a company)
Postal address Same as above
Details of interest
Additional persons with an interest in the existing colliery holding
Provide the full name, contact details, ACN or ARBN (for foreign companies), street address (individual), registered street address (company) and postal address details of additional interest holders and the details of any interest.
Additional persons with an interest
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 11
6 Transfer details I am applying to transfer land from a colliery holding to another registered colliery holding.
No – go to section 7
Yes
6.1 Name of recipient colliery holding
Provide the current name of the colliery holding:
6.2 Transferee/s details
1st Transferee details
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
2nd Transferee details
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 12
3rd Transferee details
Name
Contact phone
Contact email
ACN / ARBN
Street address (Registered street address for a company)
Postal address Same as above
Additional transferee/s
Provide the full name, contact details, ACN or ARBN (for foreign companies), street address (individual), registered street address (company) and postal address details of additional transferee/s.
Additional transferee/s
6.3 Transferee contact details for this application
Details of the contact person to whom any notices or documents are to be served in regard to this application only.
Contact details
Contact name
Position held
Company
Postal address
Phone (incl area code)
Mobile
The preferred contact method
Email (for companies – provide a company email address which is regularly monitored rather than an individual employee’s email address)
Mail (including DX)
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 13
6.4 Details of land to be transferred
Provide a map as described in cl9 of the Mining Regulation 2016, showing the alignment of the area of the colliery holding boundaries relative to the Map Grid of Australia coordinates of all the points where there is a change in direction of the boundaries of the land. If a boundary map is not available, you may provide a cadastral map and, if this is not available, an aerial photograph, satellite image or topographic map of suitable quality.
I have attached a standard map
I have inserted my standard map below:
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 14
6.5 Coordinates of the land to be transferred compliant with Map Grid of Australia (MGA94)
Attach the MGA94 coordinates as a separate electronic file in a CSV format.
I have attached the MGA94 coordinates to this application
6.6 Area of the colliery holding to be transferred
Area of the colliery holding to be transferred
Total area m2 ha km2
Surface area m2 ha km2
6.7 Area of each authority (mining lease or freehold title) within the colliery holding to be transferred
Note: Where the colliery is over a part of an authority, only include that area of the authority subject to the colliery.
1st Area of authority (mining lease or freehold)
Authority
Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
2nd Area of authority (mining lease or freehold)
Authority
Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
3rd Area of authority (mining lease or freehold)
Authority
Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
4th Area of authority (mining lease or freehold)
Authority
Total area within colliery m2 ha km2
Surface area within colliery m2 ha km2
Additional authorities
If there is insufficient space above, provide the total area and total surface area of any additional authorities/part authorities within the colliery holding to be transferred.
Additional authorities
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 15
7 Variation of a colliery holding I am applying to vary the colliery holding by adding land to or deleting land from the colliery holding.
No – go to section 8
Yes
I am applying to Add an area to a colliery holding
Remove an area from a colliery holding
7.1 Standard map of the proposed area of the colliery holding
Provide a map as described in cl9 of the Mining Regulation 2016, showing the alignment of the area of the proposed colliery holding boundaries relative to the Map Grid of Australia coordinates of all the points where there is a change in direction of the boundaries of the land. If a boundary map is not available, you may provide a cadastral map and, if this is not available, an aerial photograph, satellite image or topographic map of suitable quality.
I have attached a standard map
I have inserted my standard map below:
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 16
7.2 Coordinates of the proposed area of the colliery holding compliant with Map Grid of Australia (MGA94)
Attach the MGA94 coordinates as a separate electronic file in a CSV format.
I have attached the MGA94 coordinates to this application
7.3 Area to be added to or excluded from the colliery holding
Area to be added to or excluded from the colliery holding
Total area m2 ha km2
Surface area m2 ha km2
7.4 Area of each mining lease to be added to or excluded from the colliery holding
Note: Where the colliery is over a part of an mining lease, only include that part of the mining lease subject to the colliery.
1st Area of mining lease
Mining lease
Total area of mining lease (or part of mining lease) currently within colliery
m2 ha km2
Area of mining lease to be added to/excluded from the colliery
m2 ha km2
Remaining area of mining lease within colliery (ie area of mining lease not added or excluded)
m2 ha km2
Surface area currently within colliery
m2 ha km2
Surface area of mining lease within colliery to be added to/excluded from the colliery
m2 ha km2
Remaining surface area of mining lease (ie area of mining lease not added or excluded)
m2 ha km2
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 17
2nd Area of mining lease
Mining lease
Total area of mining lease (or part of mining lease) currently within colliery
m2 ha km2
Area of mining lease to be added to/excluded from the colliery
m2 ha km2
Remaining area of mining lease within colliery (ie area of mining lease not added or excluded)
m2 ha km2
Surface area currently within colliery
m2 ha km2
Surface area of mining lease within colliery to be added to/excluded from the colliery
m2 ha km2
Remaining surface area of mining lease (ie area of mining lease not added or excluded)
m2 ha km2
3rd Area of mining lease
Mining lease
Total area of mining lease (or part of mining lease) currently within colliery
m2 ha km2
Area of mining lease to be added to/excluded from the colliery
m2 ha km2
Remaining area of mining lease within colliery (ie area of mining lease not added or excluded)
m2 ha km2
Surface area currently within colliery
m2 ha km2
Surface area of mining lease within colliery to be added to/excluded from the colliery
m2 ha km2
Remaining surface area of mining lease (ie area of mining lease not added or excluded)
m2 ha km2
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 18
Additional mining leases
If there is insufficient space above, provide the total area, surface area, area to be added/excluded and remaining area of any additional mining leases/part leases being added to or excluded from the colliery holding.
Additional mining leases
7.5 Reasons for the amendment
Provide the reasons for the amendment of the area of the colliery holding
8 Amendment of the colliery holder/s I am applying to amend the colliery holder/s.
No – go to section 9
Yes
8.1 Existing colliery holding details
Provide existing colliery holding name
8.2 Existing colliery holder/s
1st Existing colliery holder
New name
Previous name
ACN / ARBN
Contact phone
Street address (Registered street address for a company)
Postal address Same as above
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 19
2nd Existing colliery holder
New name
Previous name
ACN / ARBN
Contact phone
Street address (Registered street address for a company)
Postal address Same as above
8.3 New colliery holder/s
1st New colliery holder
New name
ACN / ARBN
Contact phone
Street address (Registered street address for a company)
Postal address Same as above
2nd New colliery holder
New name
ACN / ARBN
Contact phone
Street address (Registered street address for a company)
Postal address Same as above
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 20
Additional new colliery holders
Provide the full name, contact details, ACN or ARBN (for foreign companies), street address (individual), registered street address (company) and postal address details of additional new colliery holders.
Additional applicants
8.4 Reasons for the amendment
Provide the reasons for the amendment of the colliery holder.
Reasons for the amendment
9 Cancellation of a colliery holding I am applying to cancel a colliery holding
No – go to section 10
Yes
Provide a brief description of the reasons for the cancellation of the colliery holding
10 Change of colliery holding name I am requesting the Minister to change the name of a colliery holding
No – go to section 11
Yes
Prior to proposing a new name of a colliery, it is advised that you discuss the proposed name with the Department.
Yes – I have discussed the proposed name with the Department
Proposed new name of the colliery holding
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 21
11 Checklist of items to be included with this application
Item Reference
Map of the proposed colliery holding (if applicable) Question 4
Register a colliery – MGA94 coordinates (if applicable) Question 4
Transfer or variation of an existing colliery holding – map (if applicable) Question 5
Transfer or variation of an existing colliery holding – MGA94 coordinates (if applicable)
Question 5
Transfer land – map (if applicable) Question 6
Transfer land – MGA94 coordinates (if applicable) Question 6
Vary land – map (if applicable) Question 7
Vary land – MGA94 coordinates (if applicable) Question 7
Reasons for amendment (if applicable) Question 8
For agents only – evidence of appointment as agent, if this has not been previously supplied to the department
Question 12
12 Declaration This form should be signed by the applicant/s (in the case of a company a duly authorised officer) or an agent authorised to act on behalf of the applicant/s.
12.1 Applicant/s (individual or company)
For each applicant (signed below):
I certify that the information provided is true and correct to the best of my knowledge and belief. I understand under the Crimes Act 1900 NSW Part 5A, that knowingly or recklessly giving false or misleading information is a serious offence, and under the Mining Act 1992 section 378C, any person who provides information that the person knows to be false or misleading is guilty of an offence, for which they may be subject to prosecution.
(For companies only) In addition to the declaration above, by signing below, I also certify that I am authorised to complete and provide the information in this form on behalf of the company listed in section 1 of this form.
1st Applicant details
Name
Position/title
Date
Signature
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 22
2nd Applicant details
Name
Position/title
Date
Signature
3rd Applicant details
Name
Position/title
Date
Signature
12.2 Agent authorised to act for this applicant/s
Evidence of appointment is required if this has not been previously supplied to the Department.
Agent details
Name
Position/title
Date
Signature
Application for registration, transfer or variation of a colliery holding
Form AD15, Mining Act 1992
Regional NSW | DOC20/442520 - July 2020 | 23
Office/Administrative use only
Application received:
Time: Date:
Officer’s Name
Signature
Document control
Approved by: Executive Director, Resource Operations, Regional NSW under delegation from the
Minister administering the Mining Act 1992.
CM9 Reference: DOC20/442520
Amendment schedule
Date Version # Amendment
July 2020 1.0 New format for Regional NSW. Form updated to reflect new Departmental name and branding, and updated links.