ACS ACTUATOR CONTROL SOLUTIONS
LINEAR SOLUTIONS MADE EASYLINEAR SOLUTIONS MADE EASY
SERVO DRIVE AND MOTORSSTEPPER DRIVE AND MOTORS
1-800-328-2174 www.tolomatic.comacs_2
ACS – Actuator Control SolutionsWHAT IS THE ACS?The ACS is an extremely easy-to-use servo or stepper drive & controller developed specifically to be used with electric actuators. Simply select the configured Tolomatic actuator in the software to automatically set-up most of the necessary parameters to create motion in the desired linear units (mm or inch).
BASIC CAPABILITIES:• Operation Modes
» 4, 8, or 16 configurable move commands (absolute, incremental, jog, or home move types) with motion commanded via digital inputs.
» Analog input positioning mode (0-10Vdc or 4-20mA)
» Pneumatic mode replaces pneumatic valve operation for simple motion
» Modbus RTU over RS485 provides infinite positioning
ETHERNET/IP OPTION• Infinite positioning with EtherNet/IP CIP I/O commands
• Dual port with internal switch for daisy chaining
• Analog output echoing actuator position
MODBUS TCP OPTION • Infinite positioning with Modbus TCP
commands
• Dual port with internal switch for daisy chaining
• Analog output echoing actuator position
MotorsSERVO• NEMA23 & NEMA34
STEPPER• NEMA11, NEMA17 & NEMA23
• Adjustable motion profile parameters. Position, velocity, accel, decel, force parameters are Independently configurable for up to 16 moves.
• Force limiting
• Zone output based on position
• Configurable digital I/O (24Vdc Opto-lsolated, sourcing or sinking)
• Ability to reduce holding current for energy savings [Stepper]
• Compatible with most 24Vdc 2-phase stepper motors [Stepper]
1-800-328-2174 www.tolomatic.com acs_3
ACS – Features
• Windows® compliant
EASY TO USE CONFIGURATION SOFTWARE
MOTOR POWER
• 10-60VDC Servo Motors• 10 Arms Continuous /
20 Arms Peak
• 24VDC Stepper Motors
Servo Drive Stepper Drive
COM PORT
• USB Com Port • RS232 Com Port
Servo Drive Stepper Drive
ACS POWER
• 10-60VDC • 24VDC
Servo Drive Stepper Drive
ETHERNET (OPTION)
DIGITAL I/0
ANALOG I/0
LED INDICATORS
RS485 COM PORT
DUAL PURPOSE HEAT SINK
FEEDBACK
Protocols: • EtherNet/IP • Modbus TCP
• 8 Digital Inputs• 4 Digital Outputs•24 Vdc Opto-Isolated• Sourcing or Sinking• Configurable Inputs
• 0-10 Vdc or 4-20mA• 1 Analog Input• 1 Analog Output
(optional)
• Modbus RTU (Base Model)
• Removes heat from drive for optimal performance
• Panel mounting
•Motor Power & Fault indicators
•For Digital Encoder
1-800-328-2174 www.tolomatic.comacs_4
ACS – Actuator Control Solutions
DIMENSIONS 3D CAD available at www.tolomatic.com
3.55 [90.2] (2) 0.80[20.3]
(2)
5.80[147.3]
4.29 [109.0] 0.88[22.2]
(2)
0.12[2.9]TYP.
Ø.17[4.3]TYP.
1.38[34.9]
PART #:MODEL #:
www.tolomatic.com Made in U.S.A.RoHSCOMPLIANT
SIZING
ACTUATOR
SIZING SOFTWARE AVAILABLE AT WWW.
TOLOMATIC.COM
ACS SERVO & STEPPER DRIVE/CONTROLLER DIMENSIONS
See ACS Hardware and Installation Guide (Stepper #3604-4173) for more details.
See ACS Hardware and Installation Guide (Servo #3604-4181) for more details.
STEPPERSERVODRIVE POWER
Current - Max 4AVoltage Nominal 20 - 28V
Over Voltage 30VUnder Voltage 18V
Absolute Maximum Voltage 35VLogic Current Draw (24V) 100 mA
DRIVE POWERCurrent - Continuous (Max) 10A
Current - Peak (Max)l 20AOver Voltage 65V
Under Voltage 9VAbsolute Maximum Voltage 70V
Logic Current Draw (24V) 200 mA
OPERATING CONDITIONSAmbient Temperature 77°F, 25°C Nominal
Operating Temperature 32 - 104°F, 0 - 40°CStorage Temperature 32-158°F, 0-70°C
Humidity 0 - 90% non-condensing
ACS Specifications
1-800-328-2174 www.tolomatic.com acs_5
Servo Motors
PERFORMANCE DATA WITH ACS DRIVE/CONTROLLER
SPEED vs TORQUE - NEMA23 MOTOR, AMV2C1A1
SPEED vs TORQUE - NEMA23 MOTOR, AMV2C2A1
48V Continuous
24V Peak
24V Continuous
E 24V Continuous
48V Peak
E 48V Continuous
0 1,000 2,000 3,000 4,000 5,000 6,000
10
8
6
4
2
0
1.13
0.90
0.78
0.45
0.23
00 1,000 2,000 3,000 4,000 5,000 6,000
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
10
8
6
4
2
0
1.13
0.90
0.78
0.45
0.23
0
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
48V Continuous
0 1,000 2,000 3,000 4,000 5,000 6,000
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
6
5
4
3
2
1
0
0.68
0.56
0.45
0.34
0.23
0.11
24V Peak
24V Continuous
E 24V Continuous
48V Peak
E 48V Continuous
MOTOR SPECIFICATIONSNEMA 23 NEMA 34
AMV2C1A1 AMV2C2A1 AMV2C3A1 AMV2D1A1 AMV2D2A1Continuous Torque 2.63 in-lbs 4.25 in-lbs 4.29 in-lbs 5.9 in-lbs 9.87 in-lbs
Peak Torque 5.25 in-lbs 8.5 in-lbs 13 in-lbs 11.9 in-lbs 21.46 in-lbs
Resistance 0.23 Ohms 0.205 Ohms 0.616 Ohms 0.250 Ohms 0.208 Ohms
Inductance 0.244 mH 0.305 mH 0.915 mH 0.325 mH 0.399 mH
Torque Constant (Kt) 4.824 oz-in/A 8.189 oz-in/A 14.189 oz-in/A 11.068 oz-in/A 18.243 oz-in/A
Back EMF Constant (Ke) 3.570 V/kRPM 6.06 V/kRPM 10.5 V/kRPM 8.190 V/kRPM 13.5 V/kRPM
Max. Continuous Current 10 Amps 10 Amps 3.5 Amps 10 Amps 10 Amps
Max. RPM 6,000 RPM 6,000 RPM 6,000 RPM 5,000 RPM 5,000 RPM
Rotor Inertia 0.001 oz-in-s2 0.002 oz-in-s2 0.002 oz-in-s2 0.01 oz-in-s2 0.02 oz-in-s2
Motor Poles 8
Max Case Temp 185°F (85°C)
SIZING
ACTUATOR
SIZING SOFTWARE AVAILABLE AT WWW.
TOLOMATIC.COM
E refers to E1 motor option (ERDSS2, enclosed motor) see ordering page ACS_11
E refers to E1 motor option (ERDSS2, enclosed motor) see ordering page ACS_11
1-800-328-2174 www.tolomatic.comacs_6
Servo MotorsPERFORMANCE DATA WITH ACS DRIVE/CONTROLLER
SPEED vs TORQUE - NEMA23 MOTOR, AMV2C3A1
SPEED vs TORQUE - NEMA34 MOTOR, AMV2D1A1
SPEED vs TORQUE - NEMA34 MOTOR, AMV2D2A1
SIZING
ACTUATOR
SIZING SOFTWARE AVAILABLE AT WWW.
TOLOMATIC.COM
0 500 1,000 1,500 2,000 2,500 3,000
TORQ
UE (N
-m)
25
20
15
10
5
0
2.82
2.26
1.69
1.13
0.56
24V Peak
24V Continuous
48V Peak
RPM
TORQ
UE (i
n-lb
)
48V Continuous
0 1,000 2,000 3,000 4,000 5,000
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
14
12
10
8
6
4
2
0
24V Peak
24V Continuous
48V Peak
1.58
1.36
1.12
0.90
0.68
0.45
0.23
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
48V Continuous
RPM
48V Continuous
0 1,000 2,000 3,000 4,000
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
14
12
10
8
6
4
2
0
1.58
1.36
1.12
0.90
0.68
0.45
0.23
24V Peak
24V Continuous
E 24V Continuous
48V Peak
E 48V Continuous
E refers to E1 motor option (ERDSS2, enclosed motor) see ordering page ACS_11
1-800-328-2174 www.tolomatic.com acs_7
Servo MotorsTOLOMATIC MOTOR DIMENSIONS 3D CAD available at www.tolomatic.com
NEMA23 DIMENSIONS
NEMA34 DIMENSIONS
45°
2.337 ±.030[59.36 ±.76]
Ø1.500 ±.002[38.10 ±.05]
Ø.205 [5.21]THRU (4)
Ø2.625 B.C.[66.68]
A.900 ±.030
[22.86 ±.76].075 ±.004[1.91 ±.10]
.190 [4.82]
[6.358 ] 6.342Ø.2503.2497
45°
3.420 ±.030[86.87 ±.76]
Ø2.875 ±.004[73.03 ±.10]
Ø.220 [5.59]THRU (4)
Ø3.875 B.C.[98.43]
.118[3.00]
.197[5.00]
1.250[31.75]
.080 [2.03]
B
.250 [6.35]
[12.70 ] 12.67Ø.500.499
A A
.197[5.00]
.787[20.00]
SECTION A-A
CODE PART NO. AAMV2C1A1 3604-1845 2.790" [70.87mm] ± 0.100" [2.54mm]AMV2C2A1 3604-1847 3.540" [89.92mm] ± 0.100" [2.54mm]AMV2C3A1 3604-1846 3.540" [89.92mm] ± 0.100" [2.54mm]
CODE PART NO. BAMV2D1A1 3604-1849 2.770" [70.36mm] ± 0.100" [2.54mm]AMV2D2A1 3604-1851 3.510" [89.15mm] ± 0.100" [2.54mm]
acs_8
1-800-328-2174 www.tolomatic.com
Stepper Motors
PERFORMANCE DATA WITH ACS DRIVE/CONTROLLERSPEED vs TORQUE - NEMA23 MOTOR
SPEED vs TORQUE - NEMA17 MOTOR
SPEED vs TORQUE - NEMA11 MOTOR
SIZING
ACTUATOR
SIZING SOFTWARE AVAILABLE AT WWW.
TOLOMATIC.COM
0 200 400 600 800 1000 1200 1400RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
1.0
0.8
0.6
0.4
0.2
0
0.11
0.09
0.07
0.05
0.02
0 100 200 300 400 500 600 700 800 900RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
5
4
3
2
1
0
0.56
0.45
0.34
0.23
0.11
0
0 200 400 600 800 1000 1050
RPM
TORQ
UE (i
n-lb
)
TORQ
UE (N
-m)
6
5
4
3
2
1
0
0.68
0.56
0.45
0.34
0.23
0.11
MOTOR SPECIFICATIONSSpecifications NEMA 11 NEMA 17 NEMA 23
Motor Type Bipolar Stepper, 1.8° per StepEncoder Differential; 500 line (2000 count post quad)
Resistance 3.5 Ω 2.4 Ω 1.5 ΩInductance 2.3 mH 4.5 mH 3.7 mH
Rated Current 1 Arms 1.5 Arms 2 ArmsMaximum Torque 0.813 in-lbs 0.092 N-m 4.4 in-lbs 0.497 N-m 6.25 in-lbs 0.706 N-m
Maximum RPM 1500 RPM 900 RPM 1050 RPMDegree per Step 1.8° 1.8° 1.8°
Rotor Inertia 0.006 lb-in2 17.588 g-cm2 0.028 lb-in2 81.939 g-cm2 0.075 lb-in2 219.481 g-cm2
acs_9
1-800-328-2174 www.tolomatic.com
Stepper MotorsTOLOMATIC MOTOR DIMENSIONS 3D CAD available at www.tolomatic.com
1.67 [42.3]
0.833[21.15]
0.833[21.15]
1.220 [31.00]
1.67[42.3]
1.220[31.00]
Ø1.726[43.84]
0.610[15.50]
0.610[15.50]
M3 x 0.5-6H0.177 [4.50] (4)
0.28 [7.0]
0.94 [24.0]
0.43[11.0]
5.91[150.0]
1.90 [48.3]Ø.079 ±0.008
±0.20]
+0.0000 -0.0005+0.000 -0.012
+0.000 -0.052+0.000 -0.020
[2.00
22.000
HOUSING: JST PHR-6
OPTI
ONAL
ENCO
DER
TERMINAL: JST SPH-002T-PO.55
HOUSING: AMP 794954-6TERMINAL: AMP 794958-1
AWG24 UL3266
Ø.8661
Ø.1969
5.000
THRU (4)
JST S68-XH-A-1(LF)(SN) HOUSING: JST XHR-6TERMINAL: JST SXH-001T-PO.6
HOUSING: AMP 794954-6TERMINAL: AMP 794958-1
AWG24 UL32665.91
[150.0]
0.24 [6.2]
0.177 [4.5]
1.97 [50.0]0.811[20.60]
Ø2.625[66.68]
0.928[23.57]
0.928[23.57]
2.30[58.4]
2.30 [58.4]
0.20 [5.0]
1.150[29.20]
1.150[29.20]
+0.0000 -0.0005+0.000 -0.012
Ø.2500
6.350+0.008 -0.000+0.20 -0.00
Ø.201
5.10
Ø1.500 ±0.002±0.05][38.10
1.856 ±0.008±0.08][47.15
1.856 ±0.008±0.08][47.15
0.063 ±0.008±0.20][1.60
OPTI
ONAL
ENCO
DER
2.01 [51.0] 0.452[11.48]
1.11 [28.3]
1.11[28.3]
0.197 [5.00]
0.65 [16.5]
0.557[14.15]
0.557[14.15]
0.453[11.51]
0.453[11.51]
Ø1.281[32.54]
M2.5 x 0.45-6H 0.10 [2.5] (4)
0.37[9.5]
5.91 [150.0]
0.94 [24.0]0.079 ±0.008
±0.20][2.00
HOUSING: MOLEX 51065-0600TERMINAL: MOLEX 50212-8000HOUSING: AMP 794954-6
TERMINAL: AMP 794958-1 AWG24 UL3266
+0.000 -0.020+0.000 -0.052
Ø.8661
21.999
+0.0000 -0.0005+0.000 -0.012
Ø.1969
5.000
0.906 ±0.004±0.10][23.01
0.906 ±0.004±0.10][23.01
OPTI
ONAL
ENCO
DER
NEMA23 DIMENSIONS
NEMA11 DIMENSIONS
NEMA17 DIMENSIONS
Code DescriptionAMS1B1C1 AMS1B1G1
NEMA17 motor no encoder
AMS1B1A1 AMS1B1E1
NEMA17 motor with encoder
Code DescriptionAMS1C1C1 AMS1C1G1
NEMA23 motor, no encoder
AMS1C1A1 AMS1C1E1
NEMA23 motor, with encoder
Code Description
AMS1A1C1 NEMA11 motor no encoder
AMS1A1A1 NEMA11 motor with encoder
1-800-328-2174 www.tolomatic.comacs_10
Step
per
Serv
oACS – Service Parts Ordering
Servo-NOTE: Items 1,2,4 & 5 from table above are recommended for complete
ACS system. Order items 1,2,4 & 5 by part numbers
Stepper-NOTE: All 5 items from table above are recommended for complete
ACS system. Order items 1-5 by part numbers
Part No. Description
1.3604-9661 ACS Servo Drive/Controller (basic)3604-9662 ACS Servo Drive/Controller, EtherNet/IP (Analog Output) 3604-9663 ACS Servo Drive/Controller, Modbus TCP (Analog Output)
1.3604-9651 ACS Stepper Drive/Controller (model ST0324SD)3604-9654 ACS Stepper Drive/Controller, EtherNet/IP (Analog Output) 3604-9655 ACS Stepper Drive/Controller, Modbus TCP (Analog Output)
2.3604-1842 Servo - Motor Power / Encoder Cable (3 m)3604-1843 Servo - Motor Power / Encoder Cable (5 m)
2.3604-1766 Stepper - Motor Power Cable (3 m)3604-1767 Stepper - Motor Power Cable (5 m)
3.3604-1768 Stepper - Encoder Cable (3 meter length)3604-1769 Stepper - Encoder Cable (5 meter length)
4.3604-1770 I/O Cable (3 meter length)3604-1771 I/O Cable (5 meter length)
5.3604-9526 Tolomatic Motion Interface CD
3604-1852 Servo - USB Type B Cable
5. 3604-9044Stepper - Starter Kit (includes RJ 12 cable; D-Sub to RJ converter; USB to RS232 Converter and Tolomatic Motion Interface CD)
3604-9526 Tolomatic Motion Interface CD
3604-1795 USB to RS232 Converter
3604-9043 RJ cable and D-Sub to RJ Converter Combo
ACS DRIVE/CONTROLLER, CABLES & MOTOR REPLACEMENT PARTS
Part No. Description2190-1304 Input Power Connector
SERVO MOTORSCode Part No. Description
AMV2C1A1 3604-1845 NEMA23 motor, 1 stack with Encoder, No Brake
AMV2C1A2 3600-9810 NEMA23 motor, 1 stack with Encoder / 5:1 Gearhead
AMV2C1A3 3600-9811 NEMA23 motor, 1 stack with Encoder / 10:1 Gearhead
AMV2C1E1 2192-9130 NEMA23 motor, 1 stack with Encoder, No Brake W/SS2 Option
AMV2C2A1 3604-1847 NEMA23 motor, 2 stack with Encoder, No Brake
AMV2C2A2 3600-9812 NEMA23 motor, 2 stack with Encoder / 5:1 Gearhead
AMV2C2A3 3600-9813 NEMA23 motor, 2 stack with Encoder / 10:1 Gearhead
AMV2C2E1 2192-9150 NEMA23 motor, 2 stack with Encoder, No Brake W/SS2 Option
AMV2C3A1 3604-1846 NEMA23 motor, 3 stack with Encoder, No Brake
AMV2C3A2 3600-9814 NEMA23 motor, 3 stack with Encoder / 5:1 Gearhead
AMV2C3A3 3600-9815 NEMA23 motor, 3 stack with Encoder / 10:1 Gearhead
AMV2C3E1 2192-9140 NEMA23 motor, 3 stack with Encoder, No Brake W/SS2 Option
AMV2D1A1 3604-1849 NEMA34 motor, 1 stack with Encoder, No Brake
AMV2D1A2 3600-9816 NEMA34 motor, 1 stack with Encoder / 5:1 Gearhead
AMV2D1A3 3600-9817 NEMA34 motor, 1 stack with Encoder / 10:1 Gearhead
AMV2D2A1 3604-1851 NEMA34 motor, 2 stack with Encoder, No Brake
AMV2D2A2 3600-9818 NEMA34 motor, 2 stack with Encoder / 5:1 Gearhead
AMV2D2A3 3600-9819 NEMA34 motor, 2 stack with Encoder / 10:1 Gearhead
STEPPER MOTORSCode Part No. Description
AMS1A1C1 3604-1779 NEMA11 motor no encoder (ERD06)
AMS1A1A1 3604-1780 NEMA11 motor with encoder (ERD06)
AMS1B1C1 AMS1B1G1 3604-1775 NEMA17 motor no encoder (ERD10)
AMS1B1A1 AMS1B1E1 3604-1776 NEMA17 motor with encoder (ERD10)
AMS1C1C1 AMS1C1G1 3604-1777 NEMA23 motor, no encoder (ERD15)
AMS1C1A1 AMS1C1E1 3604-1778 NEMA23 motor, with encoder (ERD15)
1-800-328-2174 www.tolomatic.com acs_11
Servo Ordering
Stepper Ordering
MOTOR
MOTOR
DRIVE
DRIVE
MOTOR ORDER CODEAM Tolomatic Motor
MOTOR ORDER CODEAM Tolomatic Motor
SERVO ORDER CODESV Tolomatic ACS Servo Drive
STEPPER ORDER CODEST Tolomatic ACS Stepper Drive
DRIVE ORDER CODEUD Standard/Basic Drive with
ModBus RTU over RS485ED Standard/Basic Drive with
EtherNet /IPMD Standard/Basic Drive with
Modbus TCP
DRIVE ORDER CODESD Standard/Basic Drive with
ModBus RTU over RS485ED Standard/Basic Drive with
EtherNet /IPMD Standard/Basic Drive with
Modbus TCP
CABLE(S) ORDER CODECR3[ _ ] Cable(s) of 3m LengthCR5[ _ ] Cable(s) of 5m Length
[ 2 ] Motor and Encoder Cables[ 3 ] Motor, Encoder and I/O Cables[ 5 ] I/O Cables
CABLE(S) ORDER CODECR3[ _ ] Cable(s) of 3m LengthCR5[ _ ] Cable(s) of 5m Length
[ 1 ] Motor Cable[ 2 ] Motor and Encoder Cables[ 3 ] Motor, Encoder and I/O Cables[ 4 ] Motor and I/O Cables[ 5 ] I/O Cables
CURRENT20 20 Amp
CURRENT03 Current
VOLTAGE48 Voltage
VOLTAGE24 Voltage
MOTOR TYPES1 Stepper Motor
MOTOR TYPEV2 Servo Motor
FRAME SIZEA1 11 Frame Motor (ERD06)B1 17 Frame Motor (ERD10)C1 23 Frame Motor (ERD15)
FRAME SIZEC1 23 Frame Motor, 1 stackC2 23 Frame Motor, 2 stackC3 23 Frame Motor, 2 stackD1 34 Frame Motor, 1 stackD2 34 Frame Motor, 2 stack
AM S1 B1 E1
AM V2 C1 A1
SV 20 48 UD CR53
ST 03 24 SD CR53
NOTE: Each ERD size has only
one motor size choice
MOTOR OPTIONSA1 EncoderC1 No EncoderE1 Encoder with SS2 optionG1 No Encoder SS2 option
MOTOR OPTIONSA1 EncoderA2 Encoder / 5:1 GearheadA3 Encoder / 10:1 GearheadE1 Encoder with SS2 option
©2014 TOLOMATIC
8All brand and product names are trademarks or registered trademarks of their respective owners. Information in this document is believed accurate at time of printing. However, Tolomatic assumes no responsibility for its use or for any errors that may appear in this document. Tolomatic reserves the right to change the design or operation of the equipment described herein and any associated motion products without notice. Information in this document is subject to change without notice.
Visit www.tolomatic.com for the most up-to-date technical information
3800 County Road 116 • Hamel, MN 55340 U.S.A. Phone: (763) 478-8000 • Fax: (763) 478-8080
Toll-Free: 1-800-328-2174 Email: [email protected] • http://www.tolomatic.com
THE TOLOMATIC DIFFERENCE What you expect from the industry leader:EXCELLENT CUSTOMER SERVICE & TECHNICAL SUPPORTOur people make the difference! Expect prompt, courteous replies to all of your application and product questions.
INDUSTRY LEADING DELIVERIESTolomatic continues to offer the fastest delivery of standard catalog products. Modified and custom products ship weeks ahead of the competition.
INNOVATIVE PRODUCTSFrom standard catalog products... to modified products... to completely unique custom products, Tolomatic designs and builds the best solutions for your challenging applications.
SIZING
ACTUATOR ONLINE SIZING & SELECTION SOFTWAREOnline sizing that is easy to use, accurate and always up-to-date. Input your application data and the software will determine a Tolomatic electric actuator to meet your requirements.
3D MODELS & 2D DRAWINGS AVAILABLE ON THE WEBEasy to access CAD files are available in many popular formats.
POWER TRANSMISSION PRODUCTS
ELECTRIC PRODUCTS
PNEUMATIC PRODUCTS RODLESS CYLINDERS: Band Cylinders, Cable Cylinders, MAGNETICALLY COUPLED CYLINDERS/SLIDES; GUIDED ROD CYLINDER SLIDES
“FOLDOUT” BROCHURE #9900-9075 PRODUCTS BROCHURE #9900-4028
ROD & GUIDED ROD STYLE ACTUATORS, HIGH THRUST ACTUATORS, SCREW & BELT DRIVE RODLESS ACTUATORS, MOTORS, DRIVES AND CONTROLLERS
“FOLDOUT” BROCHURE #9900-9074 PRODUCTS BROCHURE #9900-4016
GEARBOXES: Float-A-Shaft®, Slide-Rite®; DISC CONE CLUTCH; CALIPER DISC BRAKES
“FOLDOUT” BROCHURE #9900-9076 PRODUCTS BROCHURE #9900-4029
ALSO CONSIDER THESE OTHER TOLOMATIC PRODUCTS:
201403211307 LITERATURE NUMBER: 3600-4185_01