Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
Basement Flooded?Think ‘Flood-Buster...’
Designed IN the 21st Century FOR the 21st Century...
Q. What makes the Flood-BusterSystem Unique?
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
After 15 years of selling the ‘best’ that the USA had to offer, our customers, were fed up with the outdated designs.
Pipes and wires coming up through the lid, make access difficult and inconvenient .
Often flimsy and without a gas tight seal, poorly designed lids waste floor space, allow gasses to escape and are an eye-sore.....
A. Our Customers Desires ...
Most other aspects of technology have improved over the years....
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
So why not the humble Basement Sump and Pump System?
In 2011 we discontinued the old models and gave our customers what they wanted - the ALL NEW FLOOD-BUSTER...
Making things, more convenient,reliable, powerful, beautiful, better value...
Our customers wanted a different kind of sump lid.
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
One that didn’t consume floor- space, that they could open easily that was strong enough to walk on, put furniture on, that was easy to lay a floor finish around or over, that had a compressible seal to restrict the escape of moisture vapour and other gasses...
So we went back to the drawing board and re-designed the basement sump from the top down.
The result? Happy customers!
Our installers wanted system that was easy to install...
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
The ABS FLOOD-BUSTER sump liner comes ready assembled or in sections.
Un-assembled it will fit through a space less than 10” wide, giving easier to access difficult spaces and requiring less room to store and to transport .
The base , being circular and slender and shallower than usual (20” ) This design makes for easier digging and eliminates ‘over pumping’ of ground –water - as happens with deeper liners – ultimately saving the home owner money.
Our customers wanted greater reliability and peace of mind...
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
So we gave it to them with the ABS Power -Pump.
The corrosion resistant stainless steel body houses a highly precision engineered mechanism, all of which comes with a 3 year manufacturer’s warranty .
Precision engineering means less friction, less heat less noise and less wasted electricity than others in it’s class.
The ABS Power-Pump comes in 1/3rd
(standard) and ½ horse power options.
When the power is out the battery pump might be all that stands between the homeowner and disaster...
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
The FB 12v DC back up system comes in three sizes, to fit all budgets: -
Flood-Buster MINI (1,100 gal per min)
Flood-Buster MIDI (2,000 gal per min)
Flood-Buster MAXI (3000 gal per min)
Affordability and Reliability are paramount...
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
The charger units are built by DMS Technologies, suppliers of back up systems to the military,
Constantly monitoring the condition of the battery they charge it according to it’s needs.
Discrete wiring houses an alarm which sounds every time the 12v pump runs.
The pumps are (reliably) self-priming, thus eliminating the biggest cause of failure experienced by our rivals – air locks .
The kits include, 12v pump, charger, valve alarm and fittings. And are designed to be powered by a 12v 100 amp hour Marine / leisure battery s which is not included and should be sourced locally.
ABS Flood-Buster Sump Liner Technical Specifications
Top view, showing ABS drain outlet and
top of sump.
Lid is 16mm (2/3rd”) thick. 18” square
and will support loads in excess of
500lbs
All dimensions in millimetres.
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
See separate Installation guide for further details. Technical assistance is available by telephone and e-mail. [email protected]
Drain Technical
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
See separate Installation guide for further details. Technical assistance is available by telephone and e-mail. [email protected]
Bottom view, showing ABS drain outlet
and underside of sump chamber.
Base is 350mm (13 ¾”) dia and 6mm
thick .
This view illustrates the underside of the
sump rim which, in turn, supports the lid.
This outward overhang is supported by
concrete when the liner is installed giving
additional strength to the lid.
ABS Flood-Buster Sump Liner Technical Specifications
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
3D view, showing ABS drain outlet and
channel as they relate to the sump liner.
Outline of lid is shown in expanded view
for clarity.
ABS Flood-Buster Sump Liner Technical Specifications
ABS Flood-BusterTypical installation for a finished Basement...
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
ABS Power-Pump Technical Specifications
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
BOTH PUMPS
Dual float switch
Control box with: -
Export terminals for emergency dial out
Automatic weekly test run for extended pump life
Built in alarm which sounds if a problem is detected
Energy efficient Permanent Split Capacity (PSC) motor
Saves between 150 and 180% energy use as compared
with average pumps of same power rating
Continuous duty rated
Thermally protected
Water cooled (no oil leaks)
Stainless steel shaft and fasteners
Upper and lower sealed ball bearings
Voltage: 115 VAC, 60 Hz
1/3hp pump
Flow @ 10 ft Head: 3000 GPH
Max Head: 30 Ft ( 9.1 m)
Pumps 6.3 gals per watt hour
Amp draw @10ft head 4.0
Discharge: 1.5" (40mm)
Weight 20lbs (9.1kgs)
1/2 hp pump
Flow @ 10 ft Head: 3900 GPH
Max Head: 33 Ft ( 10.0 m)
Pumps 7.6 gals per watt hour
Amp draw @10ft head 4.3
Discharge: 2" (50mm)
Weight 24lbs (10.9kg)
Purchase Options...
The Flood-Buster System can be purchased on-line at www.absorders.com
Copyright Advanced Basement Solutions Ltd 2012 - Patent Pending www.absorders.com Tel USA 860 910 0785 UK 0800 413 801
The system can be purchased as component parts
or as ready made kits
There is also a ‘configure your own sump option’
which allows independent selection of pump
options.
Mains pumps are available in 13rd and 1/2hp
12v DC Battery pumps are available in three sizes.
Single or multiple liners may be selected.
Ready made kits are available as detailed opposite.
Shipping time typically between 4 – 7 days
FLOOD-BUSTER SINGLESingle liner and lid
1/3rd HP Power -Pump
Quiet check valve
High level water alarm
FLOOD-BUSTER TWINSAFETwin liner and lid
2 x 1/3rd HP Power-Pump
2 x quiet see-thru check valves
High level water alarm
(additional alarm optional)
FLOODBUSTER TRI-SAFETwin liner and lid
2 x 1/3rd HP Power-Pump
1000gph 12v back pump system
2x quiet see thru check valves
High level water alarm
(additional alarm optional)