5b. Logging in by Azure AD Certification
Guide for Configuring the INAZUMA Certified Systems
INAZUMA Head Office of Sony
Agenda
Explanation Scope on this document
5b-1. Using Azure AD CertificationAbout how to use Azure AD Certification
Contents
Overview
0. Getting StartedPlease be sure to read this in using the INAZUMA Certified Systems.
Preparation
1. Receiving the user registration noticeAn e-mail notices you that your registration application has been accepted.
2. Installation of the Client CertificateClient Certificate is for proving your PC identity.
3. a. Obtaining a Global IDUpon on obtaining an individual ID by E-mail, each user is to set his/her password.
b. Preparation for Azure AD CertificationTask needed in advance for Azure AD Certification
Connecting to the INAZUMA Certified Systems
4. SSL-VPN ConnectionSSL-VPN is an encrypted communication network.
5. a. Logging in by Common Authentication ServiceThis authentication is by using the common authentication system for users of the INAZUMA Certified Systems.
b. Logging in by Azure AD CertificationThis authentication is by Azure AD Certification for users of the INAZUMA Certified Systems.
5b-1. Using Azure AD Certification
Guide of Login through Azure AD Certification ends here.
Access to an URL of INAZUMA Certified Systems which you’d like to log in.(Check URL on Appendix)
(Blank Page)
5b-1. Using Azure AD CertificationAbout how to use Azure AD Certification. These are instructions for logging in by Azure AD Certification to the
INAZUMA Certification Systems.
Overview
[ Precondition ] - Establishing SSL-VPN Connection(Not all systems requires this.)
- Completion of preparation for Azure AD Certification
1. The Azure AD Certification page shows up when accessing the system's URL.
2. Select the already registered mail address. Enter your password if the screen for requesting it is shown.
Steps
Tip
• If you are logging in for the first time, type the e-mail address you have registered.
• As Azure AD Certification Login function, “Single-Sign-On,” this screen will not be shown if you are already logged in.
(Azure AD Certification page)
(System’s top page that you’d like to log in –sample-)
Select the already registered mail address.
Prepare and S-PAS LoginPrepare and S-PAS Login
When you use S-PAS, only two browsers are available.1. IE (Ver. 11) Browser2. Google Chrome Browser
The following preparations are necessary before using.(This section describes the Internet Explorer as an example.)
Preparations1. Set up Browser’s security info. (S-PAS site registration to trusted site info.)2. Set up Azure AD authentication info. (Reset sign-in info.)3. Clear browser’s cache
Login to S-PAS (via Azure AD Authentication system)
5
S-PAS Login
Preparations1. Set up Browser’s security info.
(S-PAS site registration to trusted site info.)Click
[Internet Option]2 Click[Internet Option]2 Click
[Security] Tab3 Click[Security] Tab3Click
[Tool Mark]1 Click[Tool Mark]1 Click [trusted site]
Then Click [Site]4 Click [trusted site]Then Click [Site]4 Enter S-PAS URL,
if not exist.5 Enter S-PAS URL, if not exist.5
Click [Add]6 Click [Add]6
*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/
2. Set up Azure AD authentication (Please open a browser, access the following URL and reset Azure AD authentication.)
https://myapps.microsoft.com
Click[Person Mark]1 Click[Person Mark]1 Click
[Person Mark]2 Click[Person Mark]2 Click [Sign Out
From All]4 Click [Sign OutFrom All]4Click
[Profile]3 Click[Profile]3 Click [OK]5 Click [OK]5
3. Clear browser’s cache
Preparations
Click[Tool Mark]6 Click[Tool Mark]6 Click
[Internet Option]7 Click [Internet Option]7 Click [Access
History Delete]8 Click [AccessHistory Delete]8 Click [Delete]10 Click [Delete]10
「Do Not Check[Hold Favorite Web Site Data]9 「Do Not Check[Hold Favorite Web Site Data]9
Access History is Deleted
Login to S-PAS is as follows.
Login to S-PAS (via Azure AD Authentication system)
Click [Mail Address]2 Click [Mail Address]2
Select Depart/Depart Code
(Additional Post User)3
Select Depart/Depart Code
(Additional Post User)3
S-PAS Initial Screen
Enter S-PAS URL1 Enter S-PAS URL1
Only First Time
Click 「OK」6 Click 「OK」6
Click 「OK」4 Click 「OK」4
Select Department CS※No Need to Select Role5 Select Department CS※No Need to Select Role5
*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/
When you can not log in to S-PAS KENGAIWhen you can not log in to S-PAS KENGAI
When you can not log in to S-PAS KENGAI■ Confirm and Reset
1. Browser’s security info. (S-PAS site registration to trusted site info.)2. Azure AD authentication info. (Reset sign-in info.)3. Browser’s cache (Clear cache of browser)
■ S-PAS Login(Use AzureAD Authentication)
■ Solutions when can not login with options above4. AzureAD Authentication Reset(Option 2 Above)5. Browser’s Cache Clear(Option 3 Above)6. PC Restart
■ S-PAS Login(Use AzureAD Authentication)
When you use S-PAS, only two browsers are available.1. IE (Ver. 11) Browser2. Google Chrome Browser
The following preparations are necessary before using.(This section describes the Internet Explorer as an example.)
Preparations1. Set up Browser’s security info. (S-PAS site registration to trusted site info.)2. Set up Azure AD authentication info. (Reset sign-in info.)3. Clear browser’s cache
Login to S-PAS (via Azure AD Authentication system)
11
S-PAS Login
Confirm and Reset1. Set up Browser’s security info.
(S-PAS site registration to trusted site info.)Click
[Internet Option]2 Click[Internet Option]2 Click
[Security] Tab3 Click[Security] Tab3Click
[Tool Mark]1 Click[Tool Mark]1 Click [trusted site]
Then Click [Site]4 Click [trusted site]Then Click [Site]4 Enter S-PAS URL,
if not exist.5 Enter S-PAS URL, if not exist.5
Click [Add]6 Click [Add]6
*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/
2. Set up Azure AD authentication (Please open a browser, access the following URL and reset Azure AD authentication.)
https://myapps.microsoft.com
Click[Person Mark]1 Click[Person Mark]1 Click
[Person Mark]2 Click[Person Mark]2 Click [Sign Out
From All]4 Click [Sign OutFrom All]4Click
[Profile]3 Click[Profile]3 Click [OK]5 Click [OK]5
3. Clear browser’s cache
Confirm and Reset
Click[Tool Mark]6 Click[Tool Mark]6 Click
[Internet Option]7 Click [Internet Option]7 Click [Access
History Delete]8 Click [AccessHistory Delete]8 Click [Delete]10 Click [Delete]10
「Do Not Check[Hold Favorite Web Site Data]9 「Do Not Check[Hold Favorite Web Site Data]9
Access History is Deleted
Login to S-PAS is as follows.
Login to S-PAS (via Azure AD Authentication system)
Click [Mail Address]2 Click [Mail Address]2
Select Depart/Depart Code
(Additional Post User)3
Select Depart/Depart Code
(Additional Post User)3
S-PAS Initial Screen
Enter S-PAS URL1 Enter S-PAS URL1
Only First Time
Click 「OK」6 Click 「OK」6
Click 「OK」4 Click 「OK」4
Select Department CS※No Need to Select Role5 Select Department CS※No Need to Select Role5
*1S-PAS URLhttps://www.s-pas.sony.biz/3dspace/
Appendix.Appendix.
Appendix. INAZUMA Certified Systems URL
System Certification Type URL
S-Cabinet v2 (Inside Japan) Azure AD Certification https://s-cabinet.inazuma.sony.co.jp/v2/jsp/index.jsp
S-Cabinet v2 (Outside Japan) Azure AD Certification https://s-cabinet2.inazuma.sony.co.jp/v2/jsp/index.jsp
S-PAS KENGAI Azure AD Certification https://www.s-pas.sony.biz/3dspace/
Elephant (JIRA Included) Shared Certification https://www.tool.sony.biz/
Login to the INAZUMA certified system, please access the following URL
Revision History
Revision History
Date Ver. Contents for change Editor2018/08/17 1.0 First issue S-PAS Office
E.O.F.E.O.F.