5 Ways to Ensure Your
Mixveyor Operators Are Safe
and Productive
What We Are Going To Cover
• Introduction to Atlas Polar Mixveyor
Concrete Conveyor
• Description of Mixveyor, hydraulic system,
and components
• Pre operational checks
• Mixveyor operation and remote controls
• Mixveyor safety
What Is the Atlas Polar Mixveyor?
• A conveyer system mounted on cement trucks
• Discharges cement between 38-51 feet
depending on model
Number of Different Atlas Polar Mixveyor Models
• 3 models
‣ 38ft. non-telescopic discharges
concrete 38ft. away
‣ 51ft. telescopic discharges concrete
38-51ft. away
‣ 36ft. telescopic front discharge
Who Invented the Mixveyor?
• Robert Moffett, inventor of the
Moffett Forklift
Canadian History of Mixveyor
• Manufactured & distributed by Atlas
Polar 30+ years
• Popular and successful in industry
Is There Ontario Legislation for the Mixveyor?
• None specific to Mixveyor
• Occupational Health & Safety requires
competent training for any equipment
• Makes good business sense for proper training
of operators in awareness and requirements
• Allows for proper maintenance, safe operation,
and it’s cost effective
Atlas Polar One-Day Training Course Includes:
• Key components of equipment
‣ To identify components on system to communicate
any issues, problem areas requiring attention
‣ Knowing the equipment allows for greater
operational efficiency
‣ Prevents job interruption by identifying component
problems early
Key Components of Mixveyor
• Most popular Model-51 ft.
‣ Rear-middle-front boom systems mounted onto swing arm
that’s mounted onto rear section of cement truck
• Systems comprised of
‣ Cylinders & safety valves
‣ Hosing
‣ Bearing connection points
Key Components of Mixveyor continued
• Proper name of components for identification
• Rear Section
‣ Rear cylinders, rollers
• Middle Section
‣ Cylinders, rollers, grease bearing pivot points, and pins
• Front Section
‣ Cylinders, drive head pulley
Pre Operation Checks Required
• Prior to leaving yard
‣ Walk around inspection of hydraulic systems for leaks,
pins, and keepers in place
‣ Visual check of boom pins and keepers
‣ Inspect underside of boom not visible when extended
proper function of Atlas Polar remote control system
• At the site
‣ Ongoing inspection when equipment is in operation
What Safety Checks Should Be Performed Before a Pour?
• Safe operation of the equipment
‣ Look for overhead wires
‣ Ensure there is solid ground
‣ Control of people in area
• Operator must be aware of surroundings
and responsibility
• Avoid any incidences, injuries, and
equipment damage
Importance of Atlas Polar Radio Remote Control Systems for Mixveyor
• Replaces old manual control
• Allows operator to walk around equipment
in operation
• Allows for good view
• Performs well in any environment
Setting Up Pre-Operational Checks with the Remote
• Ensuring good communication between
transmitter and receiver
• Check buttons are receiving signals from
control box
• Check emergency stop button mounted on
control system is operating
• This check ensures proper operation of
equipment on site
Atlas Polar Mixveyor Maintenance
• Important to keep Mixveyor clean to ensure
proper inspections can be carried out
• Grease Mixveyor prior to or after daily use
to prevent wear on bearings
Owner Responsibilities
• Ensure proper and regular maintenance is performed
• Keep up with repairs
• Ensure that operators are properly trained