7/22/2019 4 - OISE Epoch 1000 Launch
1/48
EPOCH 1000 Series Introduction
OISE MEA(T) Distributor Meeting
Dubai March 3 to 5, 2009
7/22/2019 4 - OISE Epoch 1000 Launch
2/48
New Product Introduction
Olympus IMS is pleased to introduce the newest additions to the EPOCH series flawdetector product line, the
EPOCH 1 Series
7/22/2019 4 - OISE Epoch 1000 Launch
3/48
EPOCH 1000 Series Introduction
The EPOCH 1000 Series provides the highestperformance conventional flaw detection everoffered in the EPOCH flaw detector product line.
Phased Array imaging capabilities for Better Probability of Detection
More efficient inspections
Large, Full VGA resolution,transflective display
Case designed to meet IP66
environmental seal requirements.
EN12668-1 Compliant(Conventional UT)
Horizontal layout with
adjustment knob as well as
EPOCH-style adjustment cluster.
7/22/2019 4 - OISE Epoch 1000 Launch
4/48
Three Instrument Offerings
The EPOCH 1000 Series is offered in three configurations: EPOCH 1000High performance conventional Flaw Detector. Phased Array
Imaging option may be added with a hardware upgrade at an authorized
Olympus NDT service center.
EPOCH 1000iRExactly the same conventional UT features and capabilitiesas the EPOCH 1000instrument. The EPOCH 1000iRcomes with calibrated
phased array hardware pre-installed. Phased array imaging capabilities can
be activated remotely as a software option, saving the need for upgrade at a
service center.
EPOCH 1000iPhased Array imaging hardware and software capabilities arefactory installed on the EPOCH 1000i, without sacrificing any of the advanced
conventional flaw detection capabilities of the EPOCH 1000 instrument.
7/22/2019 4 - OISE Epoch 1000 Launch
5/48
EPOCH 1000 Series Product Position
The product positioning of this series of instruments is a key factor to sales success
The EPOCH 1000 Series bridges the gap between conventional, portable flaw
detectors (EPOCH and Sonic series) and the advanced phased array flaw
detectors (OmniScan series)
Instrument series may better address some market segments currently
supported by other instruments
EPOCH XT previously the only portable conventional solution
OmniScan M previously the only entry-level phased array solution
Product differentiation is a key component of selling the EPOCH 1000 Series
Direct competitors include:
GEIT USN 60
Sonatest Masterscan Series
GEIT Phasor CV
GEIT Phasor XSConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
6/48
Key FeaturesPhysical Features
Full VGA Display:The EPOCH 1000 Series features the highest qualitydisplay available in an EPOCH flaw detector
Large display size: Diagonal dimension = 165.1 mm (6.5 in.)
Full VGA (640 x 480 pixels)
Transflective design for excellent visibility in both outdoor and indoor conditions
Horizontal Layout:The EPOCH 1000 Series is the first EPOCH series flaw
detector to feature a horizontal layout since the EPOCH II series.
Addresses the requests of customers who prefer horizontal instrument layout
Allows for larger active display area
Adjustment Knob:For the first time an EPOCH flaw detector has anadjustment knob. This adjustment knob allows:
Fast parameter adjustment, especially for focal law selection
Combines with traditional arrow keypad for advanced navigation capabilities
Addresses the requests of customers who prefer knob adjustment
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
7/48
Key FeaturesPhysical Features
IP66 Environmental Rating:The EPOCH 1000 Series is designed to meetthe demands of IP66.
EN12668-1 Compliance: As with all current generation EPOCH flawdetectors, the EPOCH 1000 series is fully compliant to EN12668-1 inconventional UT mode.
New User Interface:The new user interface design of the EPOCH 1000Series has an intuitive design that is very easy to learn
Based on EPOCH XT, LTC, and OmniScan designs for appeal to current customers
Direct access buttons for adjustments required during an inspection Intuitive menu system for instrument setup and feature access
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
8/48
Key FeaturesPhysical Features
Multiple Input/Output PortsThe EPOCH 1000 Series features multiple input/outputports for various forms of analog and digital communication
VGA Out and RS-232 Port
1 USB Client, 2 USB Host Ports26 pin Hardware I/O Port
(Analog, Encoder, Trigger)
9 pin Alarm Output Port
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
9/48
Key FeaturesConventional UT Features
Conventional Performance in All Offerings:The EPOCH 1000 Seriesmaintains the same advanced conventional performance regardless of the
offering (EPOCH 1000, EPOCH 1000iRor EPOCH 1000i)
Key competitive advantage against GEIT Phasor CV and Phasor XS
PerfectSquare Tunable Square Wave Pulser:Standard
475V Maximum Pulser Energy:Standard (adjustable 50V 475V)
6000 Hz Maximum PRF Rate:Standard (adjustable 5Hz 6kHz)
Ideal for inline scanning applications
Single-Shot Measurement Architecture:The EPOCH 1000 Series maintains
the high standard set by the EPOCH XT, providing measurement rate
equivalent to PRF rate at all PRF settings
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
10/48
Key FeaturesConventional UT Features
Digital Narrowband FiltersThe EPOCH 1000 Series features two sets ofdigital narrowband filters, combining to provide over 30 filter offerings
Standard Filter Set (7):The standard set of filters are EN12668-1 compliant and
are suitable for most standard applications
Advanced Filter Set (30):The advanced set of filters provide excellent filter
flexibility that can only be matched by our EPOCH XT with the Advanced Filter
Option. The wide range of filter combinations in this set allow for excellent signal tonoise ratio and signal clarity in nearly any application.
Programmable Analog and Alarm OutputsThe EPOCH 1000 Series allows
for integration and data output by providing multiple analog and alarm outputs
4 Analog Outputs: Programmable 1V or 10V scaled output for amplitude or
thickness measurements, output at PRF or compressed to 50Hz or 60Hz(selectable)
6 Alarm Outputs: Programmable alarm outputs for threshold or combined logic
Gate alarms
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
11/48
Key FeaturesConventional UT Features
Gates and Reference CursorsThe EPOCH 1000 Series allows forthree separate measurement gates and two visual reference cursors:
Gates 1 and 2: Independent
measurement gates with alarm
conditions and tracking
capabilities for Echo-to-Echomeasurements
Interface Gate (optional):Gate 1
and/or Gate 2 tracking to interface
gate, DAC/TVG tracking, and
alarm conditions
Reference Cursors A and B:
Reference cursors for visual
reference and visual sizing
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
12/48
Key FeaturesConventional UT Features
Software Features: The EPOCH 1000 Series comes standard with software featuresdesigned to meet common inspection requirements:
Dynamic DAC/TVG with TVG TableDAC/TVG provides the same features as EPOCH XT
dynamic DAC/TVG, including
ASME, ASME-III, JIS, 20-80% DAC, Custom DAC
TVG TableCombines with Interface Gate and 6kHz PRF as a powerful component of high speed immersion
scanning
Onboard DGS/AVGClass leading DGS/AVG sizing capabilities with Atlas series and GEIT
probe library
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
13/48
Key FeaturesConventional UT Features
Software Features: The EPOCH 1000 Series comes with a variety of software featuresto meet the demands of common sizing techniques and to provide common inspection
calculations:
AWS D1.1/D1.5 Weld Rating SoftwareProvides onscreen Dweld rating according to AWS
D1.1/D1.5 code requirements (A-B-C=D).
Curved Surface CorrectionProvides surface distance and depth calculation correction basedon part diameter and thickness. Functional for measurements taken from either the outer
diameter or the inner diameter of a curved inspection surface.
Floating GateAllows any combination of Gate 1, Gate 2, and Interface Gate level(s) to float at
a user-defined level below the peak of the gated indication, providing more consistent thickness
measurements and avoiding Loss of Signal, especially in scanning modes
GageView ProCompatible with GageView Pro PC interface program for database
management, file viewing, and basic screen capture, and export features
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
14/48
Key FeaturesPhased Array Features
Phased Array Imaging CapableTheEPOCH 1000 Series provides phasedarray imaging capabilities, eitherstandard or optional, based on thefollowing:
EPOCH 1000Optional imagingrequiring hardware/software upgrade
EPOCH 1000iROptional imaging
requiring only software upgrade EPOCH 1000iStandard imaging
capabilities
Sector Scan The EPOCH 1000 Series provides a standard image view called theSector scan. This image represents a composite of A-scans across a range of angles(typically 40to 70or30to 30). One angle is selected using a cursor, and the A-scan view of this particular angle is displayed next to the Sector scan, or S-scan.
A-scan at 60(selected)
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
15/48
Key FeaturesPhased Array Features
Sector Scan using Straight Beam approach: -20to +20Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
16/48
Key FeaturesPhased Array Features
Simple Calibration Procedure Similar to conventional calibration allows conventional
operators to learn the procedure very quickly.
Velocity CalibrationSimple two point calibration
Wedge Delay CalibrationSingle reflector calibration that
compensates for different wedge paths for each angle of inspection.
Gain (Sensitivity) CalibrationEqualizes sensitivity across focallaws and through the area of inspection (TVG).
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
17/48
Key FeaturesPhased Array Features
Normal Viewing ModeThe normal S-scan viewing mode of the EPOCH 1000 Series isgeometrically correct.
When properly calibrated, the S-scan portrays a to-scale representation of the angle sweep
defined which does not utilize the full viewing area of the S-scan screen.
Best Fit Viewing Mode The EPOCH 1000 Series features a Best Fitmode in imaging.
Best Fitmode stretches the S-scan to fill the allotted display area while maintaining correct
surface and depth distances and rulers.
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
18/48
Key FeaturesPhased Array Features
Frozen Image AnalysisThe EPOCH 1000iallows A-scan and image review andanalysis while in FREEZE mode
Raw A-scan data available for all angles/focal laws
Full Gain, Gate and Cursor adjustment
A-scan indication measurements live
Image sizing cursors available for
X2X1 and/or Y2Y1 indication sizing
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
19/48
Key FeaturesUser Interface
The EPOCH 1000 Series features a new user interface for intuitive access to all features!
EPOCH 1000 Keypad and User Interface
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
20/48
Key FeaturesUser Interface
The EPOCH 1000 Series features a new user interface for intuitive access to all features!
EPOCH 1000iKeypad and User Interface
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
21/48
Direct Access KeysThe EPOCH 1000 Seriesprovides several direct access keys under the
arrow navigation cluster
Allows user to access most commonly used
adjustments and features without any menu
navigation
Parameter box above Group buttons varies
depending on direct access key press
GATES KeyGates 1-2-IF key has special
functionality
Multiple presses scrolls through Start position of
every active Gate
Once correct active Gate is selected, right and
left arrows navigate through Gate Start, Width,
Level
Key FeaturesUser Interface
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
22/48
Key FeaturesUser Interface
Up to Six Measurement Boxes
A-scan (Selected
Focal Law)
Angle/Focal
Law Selector
Menu Groups
Menu Parameters (Adjustable)
Angle/Focal
Law Cursor
S-scan with Soundpath Grid
Battery Indicator
Mode Indicator
Menu Group
Selection
(Current/Total)
Range and
Direct Access
Parameter Box
Depth/Surface Distance Rulers
A-scan Measurement
Gate
S-scan SoundpathMeasurement Gate
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
23/48
Key FeaturesUser Interface
Adjustment KnobThe adjustment knob onthe EPOCH 1000 Series, a new addition to the
EPOCH flaw detectors, is responsible for
parameter adjustment and value slewing.
Allows the user to adjust values such as angle,
range, gain, velocity, etc, up and down in either
coarse or fine increments.
Scrolls through the vertical Groupbuttons.
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
24/48
Key FeaturesUser Interface
Arrow KeysThe arrow keys on the EPOCH1000 Series, a staple of the EPOCH flawdetectors, are primarily responsible for screennavigation.
Up and Down Arrows Move between vertical group, table or menu
selections
Adjust values up and down when highlighted on a
horizontal or direct-access parameter
Right and Left Arrows Move between horizontal group, table or menu
selections
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
25/48
Key FeaturesUser Interface
F Group KeysThe EPOCH 1000 Series features a number
of direct access keys, including vertical Fkeys
Vertical Fkeys activate the corresponding parameter/menu
group to the left
P Parameter KeysThe EPOCH 1000 Series features
horizontal Pkeys
Horizontal Pkeys highlight the parameter above for adjustment
Horizontal Pkeys activate/open the function/menu above
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
26/48
Key FeaturesUser Interface
Coarse and Fine Adjustment Coarse and Fine adjustment are available for mostadjustable parameters on the EPOCH 1000 Series. Once a parameter is highlighted
for adjustment, the user can toggle between Coarseand Fineadjustment of the
parameter using the key.
If the parameter title is underlined, it is being adjusted in coarsesteps
If the parameter title is not underlined, it is being adjusted in finesteps
Check and Escape The EPOCH 1000 Series features two new keysCheckand
Escape.
Toggles between coarseand fineparameter adjustment
Activates a highlighted function, such as CAL Zero
Enters horizontal menu from a highlighted Group
Exits menus
Returns to main group from horizontal menus
Used to return to Home position
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
27/48
Key FeaturesUser Interface
Simplified Phased Array Probe SetupThe EPOCH 1000ifeatures simplified phasedarray probe setup capabilities
Automatic Probe Recognition
Limited wedge selections based on Probe ID
Default beam parameters
Velocity
Start and End Angle
Focus Depth One screen allows full setup
Similar to EPOCH XT DGS/AVG
setup
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
28/48
Target Markets and CustomersEPOCH 1000/1000iR
Level II or Equivalent Inspectors The primary target markets for the EPOCH 1000and EPOCH 1000iRinclude standard and advanced level inspectors.
EPOCH 1000/1000iRprovides excellent
standard flaw detection capabilities with a
large, high resolution display
Perfect for anyone relying on A-scans for flaw
characterization
EPOCH 1000/1000iRprovides appealing
advanced capabilities standard, enhancing
the quality of standard or difficult applications
Features include standard AWS, DGS/AVG,
ClearWave Visualization Package
EPOCH 1000/1000iR physical layout is
familiar to almost any portable flaw detector
user, incorporating EPOCH arrow navigation,
adjustment knob and intuitive menus
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
29/48
Target Markets and CustomersEPOCH 1000/1000iR
Large, high resolution display iscoveted for crack detection andsizing
Perfect for difficult IGSCC cracksizing and nuclear inspections
SureView visualization modeenhances tip diffracted signalsand potential defects even whenscreen range compresses thesesignals into the backwall
Power GenerationThe EPOCH 1000/1000iRconventional functionality is perfectly
situated for the power generation market.
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
30/48
Target Markets and CustomersEPOCH 1000
Integrators and Scanning ApplicationsThe EPOCH 1000 is well suited for basic
integration and scanning applications as an industrial flaw detector
Remote PC/device control via RS232 or USB commands
4 Programmable Analog Outputs
6 Programmable Alarm Outputs
Trigger I/O and Sync Output
Ample data storage
6kHz PRF for conventional inspections
Powerful pulser/receiver
capabilities
7/22/2019 4 - OISE Epoch 1000 Launch
31/48
Target Markets and CustomersEPOCH 1000i
Level II or Equivalent InspectorsThe phased array capable EPOCH 1000iis intended
to primarily target conventional users by providing added value imaging to complement
standard conventional inspections
Maintain conventional procedures and
code compliance
Better probability of detection with S-
scan image
Obtain multiple angles of A-scans at one
time, with one setup and one probe
(efficiency)
Maintain conventional flaw sizing
techniques via A-scan interpretation
Added confidence with images inreporting
Enhanced company profile (Add phased
array to your resume!)
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
32/48
Selling Strategy
The EPOCH 1000 Series must be carefully promoted to highlight its core featuresand benefits while still appealing to its target markets.
Appeal to Conventional Users: The EPOCH 1000 Series is the most
advanced EPOCH series flaw detector available. Its design is based on the
EPOCH XT and should appeal to conventional users well.
Target conventional users and demonstrate instruments ability to meet standard
conventional inspections
Introduce new user interface in conventional UT mode to establish familiarity and
acceptance of instrument platform
Demonstrate standard inspection techniques with high performance platform Illustrate benefits of new features, such as ClearWave visualization package
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
33/48
Selling Strategy
The EPOCH 1000 Series must be carefully promoted to highlight its core featuresand benefits while still appealing to its target markets.
Introduce Phased Array: Phased array imaging is a powerful added-value
tool in the EPOCH 1000 Series. Imaging can provide great benefits to
conventional inspections.
Probability of detection is a key messaging point
Inspection efficiency (multiple angles in one setup/probe) is a key messaging point
Split A-scan and S-scan views, showing imaging benefits while maintain A-scan
interpretation of flaws
Demonstrate ease of calibration for all focal laws (velocity, wedge delay, andsensitivity)
Provide basic demonstration, per conventional procedure, with imaging as a benefit
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
34/48
Selling Strategy
EPOCH 1000iR:This configuration offering of the EPOCH 1000 Series isdesigned to appeal to a variety of customers that will not purchase the full
EPOCH 1000i
Budget-conscious customers (mid-range pricing)
Entry-level customers working towards imaging techniques
Conventional customers who may require imaging benefits in the future
Up-Sell:The EPOCH 1000iRis priced competitively within the EPOCH 1000
Series to allow for easier up-sells from the EPOCH 1000 instrument
Small investment up front allows easy upgrade to phased array imaging
Unit does notneed to be returned to a service center for hardware upgrade and
calibration
Saves customer time and shipment fees
Saves Olympus service centers time and administrative costs
This instrument offering should be aggressively promoted to any customers looking
at the EPOCH 1000
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
35/48
Demonstration Equipment
The EPOCH 1000idemonstration equipment kit should include the following items:
EPOCH 1000iinstrument
Charger/adapter
Manual
Transport case
(Pelican style w/ foam insert)
VGA and USB cables
Phased Array probe
At least one probe included
Potential for more probes based on
market needs
Demonstration block (Aluminum)
FPOadd picture of full kit if possible
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
36/48
Demonstration EquipmentPhased Array Probes
Six phased array probes have been developed for promotion with the EPOCH 1000 Series.
General Weld Probes
Designed to match general weld inspection
performance
2.25MHz, 16 element, small footprint
5MHz, 16 element, small footprint
10MHz, 16 element, small footprint
AWS Probe
Designed to match performance and
requirements for AWS inspections
2.25MHz, 16 element, large footprint
Atlas Phased Array Probes
Integral wedge, Atlas style probes for generalinspections
2MHz, 8 element
4MHz, 16 element
FPO- need PA probe photos!
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
37/48
Product Placement and Competitive Analysis
Competitor Product Offerings
GE Inspection Technologies
Sonatest
Olympus NDT Product Offerings
EPOCH XT
OmniScan iX
OmniScan M
The EPOCH 1000 Series must be carefully promoted based on two major factors:
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
38/48
Product Placement and Competitive Analysis
The EPOCH 1000 Series fills a gap in the Olympus NDT portable flawdetector line, and bridges the gap between conventional and phased
array equipment.
Current products have been strained to meet the demands of this
intermediate market EPOCH XT sold for high-end conventional solutions
OmniScan iX sold for basic, single channel integration applications
OmniScan M sold for basic phased array
Clear product differentiation is crucial to providing the correct solutionto the customer and maximizing market penetration in all flaw detector
segments
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
39/48
Product Placement and Competitive Analysis
EPOCH 1000 and EPOCH 1000iRversus EPOCH XT
EPOCH XT
Key Features
Conventional UT
IP67
EN12668-1 Compliant
Tunable square wave pulser
Digital narrowband filters (7)
Dynamic DAC/TVG
Manual PRF adjustment
Corrosion style data logger
Software Enhancements
Advanced digital filters (30)
Encoded B-scan (single value only)
DGS and AWS sizing techniques
Floating gate
EPOCH 1000 and EPOCH 1000iR
Key Features
High Performance Conventional UT
IP66
EN12668-1 Compliant
Full VGA transflective display
Dynamic DAC/TVG
PRF adjustment up to 6kHz
Tunable square wave pulser
Digital narrowband filters (37)
DGS and AWS sizing techniques
SureView Visualization Feature
Multiple programmable analog/alarm outputs
Software Enhancements
Interface Gate
Floating Gate
EPOCH 1000iR Software-only upgrade to
phased array imaging capabilities
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
40/48
Product Placement and Competitive Analysis
EPOCH 1000 and EPOCH 1000iRversus OmniScan iXEPOCH 1000 and EPOCH 1000iR
Key Features
High Performance Conventional UT
IP66
EN12668-1 Compliant
Full VGA transflective display
Dynamic DAC/TVG
PRF adjustment up to 6kHz
Tunable square wave pulser
Digital narrowband filters (37)
DGS and AWS sizing techniques
SureView Visualization Feature Multiple programmable analog/alarm outputs
Software Enhancements
Interface Gate
Floating Gate
EPOCH 1000iR Software-only upgrade to
phased array imaging capabilities
Omniscan iX
Key Features
High Performance Conventional UT
Multi-Channel (2, 4 or 8)
Maximum 12kHz PRF
Narrowband filters (8)
Raw Data Output
16 Programmable Analog and Alarm
Outputs
Multiple A-scan Display (MUX Mode)
Multiple Strip Chart Display
Dynamic DAC/TVG C-scan capabilities
PC integration software package
Software Enhancements
Backwall Attenuator
2 Encoder Inputs
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
41/48
Product Placement and Competitive Analysis
EPOCH 1000iversus OmniScan M 16:16
EPOCH 1000i
Key Features
Phased array capable 16:16
Split A-scan/S-scan view
Multi-law A-scan view
Dynamic DAC/TVG for multiple focal
laws
DGS and AWS sizing techniques for
multiple focal laws
Conventional performance same as
EPOCH 1000/1000iR
Omniscan M 16:16
Key Features
Phased array capable 16:16
Split A-scan/S-scan view
Intuitive phased array setup wizards
C-scan
DAC/TVG sizing method
DGS and AWS sizing techniques
API 5UE sizing technique
RayTracing software
Weld overlay view
NEWStandard single line encoding
Software Enhancements
Upgradeable to Omniscan MX through
module change
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
42/48
Product Placement and Competitive Analysis
Omniscan MX Series
Omniscan M 16:64
Omniscan M 16:16
EPOCH 1000i
EPOCH 1000iR
EPOCH 1000
EPOCH XT
EPOCH LTC
EPOCH LT
Phasor XS 16:64
Phasor XS 16:16Phasor CV
USN 60
USN 58L, USN 58RUSM 35X
USM 32X
USM 33
High-End PA
Mid-Range PA
Basic PA
PA Ready
High-End Conv.
Mid-RangeConventional
Basic Conv.
Low-End
Price
/Perform
ance
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
43/48
Product Placement and Competitive Analysis
USN 60
Phasor CV
Phasor XS 16:16
Phasor XS 16:64
The product placement of the EPOCH 1000 Series is most directly targeted at the
GEIT line of high end portable flaw detectors, including:
ConfidentialFor Internal Use Only
7/22/2019 4 - OISE Epoch 1000 Launch
44/48
Product Placement and Competitive Analysis
EPOCH 1000 versus USN 60 (Direct Competitor)
EPOCH 1000 Key Advantages Transflective VGA display
IP66 environmental rating
EN12668-1 compliant
EPOCH quality user interface and color scheme
6kHz PRF in spike an dsquare wave pulser
modes
37 digital narrowband receiver filters
Full dynamic range for DAC/TVG (110dB)
50-point DAC/TVG acquisition capabilities
475V pulser for maximum penetration
4 programmable alarm outputs Virtually unlimited data logger capacity
Minimally invasive hardware upgrade to phased
array instrument
SureView visualization feature
USN 60 Key Advantages
Years of market acceptance
GEIT user interface (market acceptance)
Raw data output capabilities
Additional Notes
Comparisons:
6kHz PRF (Spike mode only)
Square wave pulser (limit 2kHz PRF)
16-point DAC/TVG
40 dB DAC/TVG dynamic range
No IP rating
450V pulser
10 analog receiver filters
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
45/48
Product Placement and Competitive Analysis
EPOCH 1000iRversus Phasor CV (Direct Competitor)
EPOCH 1000iRKey Advantages Transflective VGA display
IP66 environmental rating
EN12668-1 compliant
EPOCH quality user interface and color scheme
6kHz PRF in spike an dsquare wave pulser
modes
37 digital narrowband receiver filters
Full dynamic range for DAC/TVG (110dB)
50-point DAC/TVG acquisition capabilities
475V pulser for maximum penetration
4 programmable alarm outputs Virtually unlimited data logger capacity
Minimally invasive hardware upgrade to phased
array instrument
SureView visualization feature
Phasor CV Key Advantages
Minimal market acceptance
GEIT user interface (market acceptance)
Additional Notes
Not equivalent to USN 60
No square wave pulser
Smaller screen range
2kHz PRF
No raw data output
Comparisons
IP54 rating
EN12668-1 compliant
15-point DAC/TVG
60 dB dynamic range for DAC/TVG
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
46/48
Product Placement and Competitive Analysis
EPOCH 1000iversus Phasor XS 16:16 (Direct Competitor)
EPOCH 1000iKey Advantages Conventional UT performance equivalent to
EPOCH 1000
Transflective VGA display
IP66 environmental rating
EPOCH quality user interface and color scheme
Phased Array Automatic Probe Recognition
Minimal focal law recalculations for optimized user
interface
Wedge Delay calculation for all focal laws
EPOCH XT quality DGS curve algorithms
Integral-wedge DGS probe design for EuropeanDGS probe acceptance
Automatic Probe Recognition for simplified probe
and wedge setup
Phasor XS Key Advantages
GEIT user interface (market acceptance)
Encoded phased array scanning (added
cost option)
Competitive with OmniScan M
C-scan Capabilities (added cost option) Competitive with OmniScan M
60Hz S-scan update rate
Additional Notes
Conventional UT not equivalent to USN 60
No square wave pulser
2kHz PRF
No raw data output
Limited filter settings
Comparisons
IP54 rating
EN12668-1 compliant
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
47/48
Product Placement and Competitive Analysis
EPOCH 1000 versus MasterScan 380 (Direct Competitor)
EPOCH 1000 Key Advantages Transflective VGA display
EN12668-1 compliant
EPOCH quality user interface and color scheme
6kHz PRF in spike an dsquare wave pulser
modes
37 digital narrowband receiver filters
Full dynamic range for DAC/TVG (110dB)
50-point DAC/TVG acquisition capabilities
475V pulser for maximum penetration
4 programmable alarm outputs
Virtually unlimited data logger capacity Minimally invasive hardware upgrade to phased
array instrument
SureView visualization feature
MasterScan 380 Key Advantages
IP67 environmental rating
EPOCH 1000 Series is IP66
Automated Gain Control feature
Composite video output
EPOCH 1000 Series has VGA Outp ut API 5UE software feature
Backwall Attenuator feature
Additional Notes
Comparisons:
Quarter VGA (320 x 240 pixels)
5kHz PRF
10-point DAC/TVG
40 dB DAC/TVG dynamic range
450V pulser
6 narrowband receiver filters
No Phased Array Offer ing
Confidential For Internal Use Onl
7/22/2019 4 - OISE Epoch 1000 Launch
48/48
Questions or Comments?
Thank you!