8/22/2019 3500 Computer Hardware and Software Manual 128158-01 Rev NC
1/250
Part Number 128158-01
Revision NC, December 1995
3500 Monitoring System
Computer Hardware and Software
Manual
Return To Previous Menu
8/22/2019 3500 Computer Hardware and Software Manual 128158-01 Rev NC
2/250
Copyright 1995 Bently Nevada Corporation
All Rights Reserved.
No part of this publication may be reproduced, transmitted, stored in a retrieval system or
translated into any human or computer language, in any form or by any means, electronic,mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written
permission of the copyright owner,
Bently Nevada Corportion
1617 Water Street
Minden, Nevada 89423
Copyright infringement is a serious matter under the United States of America and foreign
copyright laws.
8/22/2019 3500 Computer Hardware and Software Manual 128158-01 Rev NC
3/250
ii
Dynamic Data Manager, Keyphasor, Proximitor, and Velomitor are registered Trademarks of
Bently Nevada Corporation.
Microsoft, MS-DOS, Windows, Windows NT, Windows for WorkGroups, and Excel are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
DigiBoard and DigiWARE are registered trademarks of Digi International Inc.
WordPerfect is a registered trademark of WordPerfect Corporation within the United States and other
countries.
Modicon, Modbus, and Modbus Plus are registered trademarks of Modicon, Inc.
Compaq is a registered trademark of Compaq Computer Corporation.
Hayes Ultra and Hayes Optima are trademarks of Hayes Microcomputer Products, Inc.
UNIX is a registered Trademark of AT&T Bell Laboratories.
WinDD is a registered trademark of Tektronix, Inc.
Quattro is a registered tradmark of Borland International, Inc.
8/22/2019 3500 Computer Hardware and Software Manual 128158-01 Rev NC
4/250
Preface
PrefaceThis manual is divided into two parts. If this is your first installation of the
3500 Monitoring System hardware and software, you should read the first part
carefully to obtain an understanding of the components of the system and how to
use them to customize your installation.
Part I - Overview, Description, InstallationPart I shows how to install and operate the 3500 Data Acquisition/DDE Server
and Operator Display Software, verify the operation of the software, and create
custom displays. The following sections are included:
< Product Overview
< System Description
< Software Installation
< 3500 Monitor Rack Communications