2015 New Product Lineup
2015
New Product LineupHigh Efficiency and High Feed EndmillMFH mini• Resistant to chattering and excellent stability• Double-sided 4-edge insert
MFK Cutter for Cast Iron Machining• Suppress chattering and achieve excellent surface finish• New ceramic for high-efficiency cuttingSilicon nitride ceramic: KS6050 Silicon nitride ceramic + CVD coating: CS7050
High Efficiency Endmill for Difficult-to-Cut Materials4TFK/4TFR• High efficiency/stable machining
New CVD Coating for Cast Iron MillingCA420M• Longer tool life/stable machining
• Combines stability and excellent surface finishCermet: TN620MEGACOAT NANO Cermet: PV720
Hybrid Cermet for Steel Machining
TN620/PV720
For stainless steel,titanium alloy,heat-resistant alloy
Small diameter: Cover from f16 to f32
SPKN, SPMNSNMN, SPENare available
Grade for Difficult- to-Cut MaterialsPR1535• Provides stable machining of difficult-to-cut materials
NEWMilling
TurningCut-off for
autolathe machine
NEW
NEW
NEW
NEW
Line up expansion
NEW
New Products
DC002EN
Wea
r re
sist
ance
High speed/longer tool life
Stability
Conventional P05 coating
Conventional P15 coating
Conventional P25 coating
Conventional P35 coating
CA510
CA530
CA515
CA525
Continuous to light
interruptionGeneral use 1st choice
Heavy interruption/
high feed
Feed f (mm/rev)
Cut
ting
fo
rce
High
Low
Small Large0.1
PGLow cutting
force
Low feed (R0.03)PF
Medium feedPQ
Low feed (R0.15)PF
CVD Coated Grade for Steel MachiningCA5 Series• Provides longer tool life/ stable machining• Wide application range
CBN for Cast Iron MachiningKBN475• High speed machining for gray cast iron
Easy Positioning/High PrecisionEZ Bar• Supports various machining
New: copying
Cut-off Tool for Autolathe MachineKGD• Excellent chip control performance
Small Nega with Sharp Edge 3D ChipbreakerSK Chipbreaker• Achieve high sharpness and excellent chip control
New: V type
Finishing for SteelPositive PP Chipbreaker• Provides stable finishing
New: V type
Line up expansion Line up expansion
Boring/internal grooving/face grooving/threading/copying
Sharp edge/Mirror finish(PR1425~PR1225)
• Excellent chip control performance and good surface finish
Back Turning with 3D ChipbreakerGQ Chipbreaker for TKFB
NEW
Low feed 2-corner insertPF Chipbreaker R0.15
Line up expansion
Line up expansion Large diameter is available
Countersink Machining Tool2ZDK• Tip angle 180° flat
2ZDK short typeCutting diameter: f1.0 to f20.0
NEW
2-step dot provide smooth chip evacuation