ITTGoulds PumpsAg-FloCast Iron Bronze Fitted End-Suction Flanged Pumps, Bombas horizontales con brida en hierro fundido o hierro fundido y bronce
Goulds Pumps is a brand of ITT Water Technology, Inc. - a subsidiary of ITT Industries, Inc.
Goulds Pumps son una marca de fábrica de ITT Water Technology, Inc. - un subsidiario de ITT Industries, inc.
www.goulds.com
Engineered for life
Ag./Irrigation,Agr/Irrigación
�GOULDS PUMPSAg./Irrigation
A Full Range of Product Features The Ag-Flo pumps from Goulds have been designed with technical benefits to meet the needs of users in a variety of water supply, recircu-lation, and cooling applications.
• Close coupled design for space saving and simplified maintenance.
• Offers a bearing frame mounted design for flexibility of installation and drive arrangements.
• SAE drive sizes 1 through 5 avail-able on most pump sizes.
• Back pull-out to reduce mainte-nance down time.
• Standard Type 21 mechanical seal for both reliability and avail-ability. Carbon/ceramic/BUNA standard, with other faces and elastomers available.
• Available in packed stuffing box design with TeflonTM impregnat-ed packing, split Teflon lantern ring, tapped flush connection and 2 piece investment cast interlocking gland, all standard.
• Available in all iron or bronze fitted construction for application versatility.
• Replaceable wearing components include stainless steel shaft sleeve and casing and hub wear rings to maintain peak efficiency.
• Enclosed impeller design, dynamic balancing and renewable wear rings reduce losses affecting performance and pump life.
• 125 Class ANSI flange suction/ discharge connections and casing rotation for piping connection versatility.
• NPT threaded connections are supplied on several of the smaller capacity sizes.
• Optional rigid carbon steel bedplate, sheet metal coupling guard and T. B. Woods spacer coupling for power frame models.
• Standard NEMA motor frame, JM shaft extension (mechanical seal) JP shaft extension (packed box), C face mounting, single phase or three phase, 3500 or 1750 RPM for 60 Hz, 2900 or 1450 RPM for 50 Hz. Open drip-proof and totally enclosed fan cooled.
• Optional explosion proof and high efficiency motors are available.
Una amplia gama de variadas característicasLas bombas Ag-Flo de Goulds han sido diseñadas con beneficios técnicos para satisfacer las necesidades de los usuarios en variadas aplicaciones de suministro y recirculación de agua y aplicaciones de refrigeración.
• Diseño de acoplamiento corto para ahorrar espacio y simplificar el mantenimiento.
• Cuentan con un diseño de montaje sobre bastidor que ofrece gran flexi-bilidad en los arreglos de instalación y accionamiento.
• Tamaños de accionamiento SAE del 1 al 5 disponibles en la mayoría de los tamaños de bombas.
• Desmontaje posterior que reduce el tiempo de inactividad por mante-nimiento.
• Sello mecánico estándar Tipo 21 que brinda confiabilidad y disponibili-dad. Estándar de carbono/cerámi-ca/BUNA, también se encuentran disponibles con otros frentes y elastómeros.
• Disponibles en diseño con caja prensaestopas con empaque de TeflonTM impregnado, aro de linterna de Teflon dividido, conexión de lavado con derivación y casquillo fundido de conexión de inversión de 2 piezas, todo estándar.
• Disponibles en hierro o con acce-sorios de bronce para una mayor versatilidad de aplicación.
• Los componentes de desgaste reemplazables incluyen los anillos de desgaste de la carcasa y del rodete y la camisa del eje, de acero inoxi-dable, para mantener una máxima eficiencia.
• El diseño de impulsor encerrado, el balanceo dinámico y los anillos de desgaste reemplazables reducen las pérdidas que afectan el desempeño y la vida útil de la bomba.
• Conexiones de succión y descarga con brida ANSI de Clase 125 y car-casa rotativa para mayor versatilidad de conexión.
• Varios de los tamaños de capaci-dad más pequeños cuentan con conexiones NPT.
• Placa de asiento rígida de acero al carbono, protector de acoplamiento de chapa metálica y acoplamiento espaciador T. B. Woods disponibles opcionales en los modelos de cuadro de fuerza.
• Bastidor de motor NEMA estándar, extensión de eje JM (sello mecá-nico), extensión de eje JP (caja prensaestopas), montaje en cara C, monofásico o trifásico, 3500 ó 1750 RPM para 60 Hz, 2900 ó 1450 para 50 Hz. Abierto a prueba de filtraciones y totalmente encerrado enfriado por ventilador.
• Se encuentran disponibles motores a prueba de explosiones de alta eficiencia.
Goulds Pumps is ISO 9001 Registered.
�GOULDS PUMPSAg./Irrigation
1 x 2-7 (3500)1 x 2-9 (3500)
11/2 x 2-6 (3500)11/2 x 2-8 (3500)
2 x 2-5 (3500)21/2 x 21/2-5 (3500)
21/2 x 3-7 (3500)3 x 3-5 (3500)3 x 4-7 (3500)4 x 4-5 (3500)5 x 5-6 (3500)
350
300
250
200
150
100
50
0
105
15
0
30
45
60
75
90
0
0 225
1000900800700600500400300200100
200175150125100755025CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)METERSMETROS
FEETPIES
GPM
m3/hr
11/2 x 2-8
21/2 x 3-7
11/2 x 2-61 x 2-7
2 x 2-5 21/2 x 21/2-5 3 x 3-5
3 x 4-7
4 x 4-55 x 5-6
1 x 2-9
Performance CoverageCampo de desempeño
500
300
200
100
0
140
20
0
40
60
80
0
0 1000
45003000150012501000750500250
75050030025020015010050CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
ÍNAM
ICA
TOTA
L)
METERSMETROS
FEETPIES
GPM
m3/hr
3 x 4-103500 RPM
4 x 6-101750 RPM
400
100
120
400
3 x 4-83500 RPM
21/2 x 3-103500 RPM
8 x 10-131750 RPM
6 x 8-131750 RPM
4 x 5-83500 RPM
4 x 6-131750 RPM
4 x 6-161750 RPM
11/2 x 2-103500 RPM
21/2 x 3-93500 RPM
11/2 x 2-10 (3500)21/2 x 3-9 (3500)
21/2 x 3-10 (3500)3 x 4-8 (3500)
3 x 4-10 (3500)4 x 5-8 (3500)
4 x 6-10 (1750)4 x 6-13 (1750)4 x 6-16 (1750)6 x 8-13 (1750)
8 x 10-13 (1750)
�GOULDS PUMPSAg./Irrigation
300
200
100
0
90
20
0
40
60
80
0
0 120
600300100
10080604020CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
ÍNAM
ICA
TOTA
L)
METERSMETROS
FEETPIES
GPM
m3/hr
250
3 x 4-8
50
150
30
50
70
10
500400200
3 x 4-10
21/2 x 3-8
21/2 x 3-13
21/2 x 3-7
11/2 x 2-1021/2 x 3-9
21/2 x 3-10
11/2 x 2-10 (1750)21/2 x 3-8 (1750)21/2 x 3-9 (1750)
21/2 x 3-10 (1750)21/2 x 3-13 (1750)
3 x 4-8 (1750)3 x 4-10 (1750)
Performance CoverageCampo de desempeño
�GOULDS PUMPSAg./Irrigation
Numbering SystemSistema de numeración
The various versions of the Ag-Flo are identified by a product code number on the pump label. This number is also the catalog number for the pump. The meaning of each digit in the product code number is shown below. Not all combinations are possible; consult your G&L distributor for specific requirements.
Example Product Code, Ejemplo del código de producto 11 BZ 2 L 1 5 A 0
Las diferentes versiones del modelo Ag-Flo se identifican con un número de código de producto en la etiqueta de la bomba. Este número es el mismo que el número de catálogo de la bomba. A continuación se ilustra el significado de cada dígito del número de código del producto. No todas las combinaciones son posibles, consulte a su distribuidor G&L para obtener los requisitos específicos.
Mechanical Seal/Packed Box and O-ring Material, Materiales del sello mecánico/empaque y anillo en OFor Optional Mechanical Seal modify catalog order no. with Seal code listed below.Para sellos mecánicos optativos, modificar el número de pedido del catálogo con los códigos de sello que se indican a continuación.
0 Ceramic, Cerámica BUNA-N
1 EPR
3
5 Viton
8A* Sil-Carbide
8B**
9*** Packed Box Design with BUNA O-Ring, Diseño de prensaestopas empacado con anillo en O de BUNA* Prime-Safe option with oiler, Opción Primero-Segura con el engrasador ** Prime-Safe option with grease, Opción Primero-Segura con la grasa*** All Packed Box Units use JP style motors, Todas las unidades de prensaestopas empacado utizilan motores estilo JP
Seal Code,
Códigodel Sello
Stationary,Estacionario
Elastomers,Elastómeros
316 SS,316 Acero inoxidable
Metal Parts,Partes Metálicas
Rotary,Rotativo
Motor Enclosure, Caja del motor1 = ODP 5 = TEFC Premium Eff., Eficiencia superior2 = TEFC 6 = XP Premium Eff., Eficiencia superior3 = Explosion Proof, Prueba de explosiones 7 = Wash down, Lavado4 = ODP Premium Eff., Eficiencia superior
Motor Voltage, Voltaje del motor1 = 115/208-230 3 = 230 5 = 208-230/460 7 = 5752 = 115/230 4 = 230/460 6 = 460
HP Rating, Potencia nominal, HPC = ½ F = 1.5 J = 5 M = 15 Q = 30 T = 60 W = 125D = .75 G = 2 K = 7.5 N = 20 R = 40 U = 75 X = 150E = 1 H = 3 L = 10 P = 25 S = 50 V = 100
Driver: Hertz/Pole/RPM, Fuerza motriz: Hertz/Polos/RPM1 = 60/3500/1 3 = 60/1750/1 5 = 50/2900/1 B = 60/1180/32 = 60/3500/3 4 = 60/1750/3 6 = 50/2900/3
Material (Packed Box in AI or BF), Material (Caja prensaestopas en AI o BF)FE = All iron BZ = Bronze fitted FE = Todo hierro BZ = con accesorios de bronce
Pump Size, Tamaño de bomba3 = 1½ x 2 – 6 8 = 1½ x 2 – 10 14 = 3 x 4 – 13 20 = 4 x 6 – 16 51 = 2 x 2 – 53H = 1½ x 2 – 6H 9 = 1 x 2 – 8 15 = 4 x 6 – 13 21 = 2½ x 3 – 9 52 = 2½ x 2½ – 54 = 2½ x 3 – 7 10 = 4 x 5 – 8 16 = 3 x 4 – 8 22 = 1 x 2 – 7 53 = 3 x 3 – 55 = 1½ x 2 – 8 11 = 2½ x 3 – 10 17 = 4 x 6 – 10 54 = 4 x 4 – 5 6 = 3 x 4 – 7 12 = 3 x 4 – 10 18 = 6 x 8 – 13 55 = 5 x 5 – 67 = 2½ x 3 – 8 13 = 2½ x 3 – 13 19 = 8 x 10 – 13
Impeller Option Code, Código de opción de impulsorSee Impeller Code Chart on following page, Consulte el Cuadro de códigos de impulsores en la página siguiente
Sil-Carbide,Carburo de
silicona
Carbon,Carbone
Frame Options, Opciones de mando Substitute, Description, Substituto Descripción
FRM2 7/8" Imp. Bore, Diámetro
interior del impulsor 7/8"
FRM3 11/4" Imp. Bore, Diámetro
interior del impulsor 11/4"
FRM4 15/8" Imp. Bore, Diámetro
interior del impulsor 15/8" SAE1 SAE #1 mount, Montura SAE #1
SAE2 SAE #2 mount, Montura SAE #2
SAE #3 mount, Montura SAE #3
SAE4 SAE #4 mount, Montura SAE #4
SAE #5 mount, Montura SAE #5SAE drive number is determined by the engine flywheel housing size., El número del mando SAE se determina por el tamaño de la caja del volante del motor.
�GOULDS PUMPSAg./Irrigation
Pump Size, 3 3H 22 4 6 9 5 7 16 10 21 8 11 12 17 13 14 15 18 19 20 51 52 53 54 55
Pump Size, Tamaño de bomba Tamaño de bomba Impeller Impeller Impeller Impeller Option Shaft Shaft Option Code, Diameter,
1½ x 2-6 1½ x 2-6H 1 x 2-7 2½ x 3-7 3 x 4-7 1 x 2-8 1½ x 2-8 2½ x -8 3 x 4-8 4 x 5-8 2½ x 3-9 1½ x 2-10 2½ x 3-10 3 x 4-10 4 x 6-10 2½ x 3-13 3 x 4-13 4 x 6-13 6 x 8-13 8 x 10-13 4 x 6-16 2 x 2-5 2½ x 2½-5 3 x 3-5 4 x 4-5 5 x 5-6 Diameter, Code,
Código de Diámetro Diámetro Código de opción de del eje del del eje del opción de impulsor impulsor impulsor impulsor A 515⁄16 515⁄16 (H) 63⁄4 71⁄16 71⁄16 81⁄16 81⁄16 715⁄16 715⁄16 77⁄8 101⁄16 101⁄16 101⁄16 93⁄4 4 43⁄16 43⁄8 413⁄16 51⁄2 x 41⁄2 A B 51⁄8 55⁄8 (H) 57⁄8 67⁄8 63⁄8 75⁄16 73⁄4 75⁄8 71⁄4 67⁄8 97⁄8 93⁄8 91⁄2 83⁄4 37⁄8 315⁄16 43⁄16 45⁄8 55⁄16 x 45⁄16 B C 51⁄4 6 6 61⁄2 75⁄8 73⁄16 613⁄16 53⁄4 91⁄2 87⁄8 81⁄4 75⁄8 31⁄2 33⁄4 4 41⁄2 5 x 37⁄8 C D 413⁄16 57⁄16 51⁄2 53⁄8 67⁄8 613⁄16 65⁄16 81⁄2 81⁄4 71⁄8 31⁄4 39⁄16 313⁄16 43⁄16 5 x 39⁄16 D E 7⁄8 Bore 43⁄8 43⁄4 51⁄8 63⁄4 63⁄8 53⁄4 83⁄16 7½ 35⁄8 4 5 x 31⁄32 7⁄8 Bore E F 41⁄16 61⁄4 63⁄16 51⁄8 F G 53⁄4 45⁄8 G H H J J K 715⁄16 715⁄16 77⁄8 101⁄16 101⁄16 101⁄16 101⁄6 101⁄16 131⁄16 131⁄16 131⁄16 13 13 K L 75⁄8 71⁄4 73⁄8 97⁄8 93⁄8 95⁄8 93⁄4 99⁄16 123⁄8 127⁄16 121⁄2 125⁄16 123⁄8 L M 73⁄16 613⁄16 67⁄8 91⁄2 87⁄8 91⁄2 91⁄8 81⁄8 1013⁄16 111⁄2 1111⁄16 115⁄8 1115⁄16 M N 613⁄16 65⁄16 63⁄4 81⁄2 81⁄4 9 83⁄4 97⁄8 101⁄2 111⁄16 107⁄8 107⁄8 N P 1¼ Bore 63⁄8 53⁄4 63⁄16 83⁄16 71⁄2 85⁄8 85⁄16 91⁄8 101⁄4 101⁄2 913⁄16 1¼ Bore P Q 63⁄16 51⁄8 53⁄4 81⁄4 73⁄4 85⁄16 93⁄8 10 Q R 45⁄8 8 75⁄8 R S 71⁄8 71⁄8 S T 63⁄4 T U 13 13 16 U V 125⁄16 123⁄8 143⁄4 V W
15⁄8 Bore 115⁄8 1115⁄16 137⁄8
15⁄8 Bore W
X 107⁄8 107⁄8 X Y 101⁄2 913⁄16 Y Z 10 Z Use Impellers with 11⁄4" Ø bores., Use Impellers with 11⁄4" Ø bores., Use Impellers with 15⁄8" Ø bores., Use Impellers with 7⁄8" Ø bores., FRM Option, FRM Option, Opción FRM Use Impellers with 7⁄8" Ø bores., Utilice con impulsores de 7⁄8" de diámetro interior. Utilice con impulsores de 11⁄4" de diámetro interior. Utilice con impulsores de 11⁄4" de diámetro interior. Utilice con impulsores de Utilice con impulsores de 7⁄8" de diámetro interior. Opción FRM 15⁄8" de diámetro interior.
Impeller Option Code, Código de opción de impulsor
�GOULDS PUMPSAg./Irrigation
Pump Size, 3 3H 22 4 6 9 5 7 16 10 21 8 11 12 17 13 14 15 18 19 20 51 52 53 54 55
Pump Size, Tamaño de bomba Tamaño de bomba Impeller Impeller Impeller Impeller Option Shaft Shaft Option Code, Diameter,
1½ x 2-6 1½ x 2-6H 1 x 2-7 2½ x 3-7 3 x 4-7 1 x 2-8 1½ x 2-8 2½ x -8 3 x 4-8 4 x 5-8 2½ x 3-9 1½ x 2-10 2½ x 3-10 3 x 4-10 4 x 6-10 2½ x 3-13 3 x 4-13 4 x 6-13 6 x 8-13 8 x 10-13 4 x 6-16 2 x 2-5 2½ x 2½-5 3 x 3-5 4 x 4-5 5 x 5-6 Diameter, Code,
Código de Diámetro Diámetro Código de opción de del eje del del eje del opción de impulsor impulsor impulsor impulsor A 515⁄16 515⁄16 (H) 63⁄4 71⁄16 71⁄16 81⁄16 81⁄16 715⁄16 715⁄16 77⁄8 101⁄16 101⁄16 101⁄16 93⁄4 4 43⁄16 43⁄8 413⁄16 51⁄2 x 41⁄2 A B 51⁄8 55⁄8 (H) 57⁄8 67⁄8 63⁄8 75⁄16 73⁄4 75⁄8 71⁄4 67⁄8 97⁄8 93⁄8 91⁄2 83⁄4 37⁄8 315⁄16 43⁄16 45⁄8 55⁄16 x 45⁄16 B C 51⁄4 6 6 61⁄2 75⁄8 73⁄16 613⁄16 53⁄4 91⁄2 87⁄8 81⁄4 75⁄8 31⁄2 33⁄4 4 41⁄2 5 x 37⁄8 C D 413⁄16 57⁄16 51⁄2 53⁄8 67⁄8 613⁄16 65⁄16 81⁄2 81⁄4 71⁄8 31⁄4 39⁄16 313⁄16 43⁄16 5 x 39⁄16 D E 7⁄8 Bore 43⁄8 43⁄4 51⁄8 63⁄4 63⁄8 53⁄4 83⁄16 7½ 35⁄8 4 5 x 31⁄32 7⁄8 Bore E F 41⁄16 61⁄4 63⁄16 51⁄8 F G 53⁄4 45⁄8 G H H J J K 715⁄16 715⁄16 77⁄8 101⁄16 101⁄16 101⁄16 101⁄6 101⁄16 131⁄16 131⁄16 131⁄16 13 13 K L 75⁄8 71⁄4 73⁄8 97⁄8 93⁄8 95⁄8 93⁄4 99⁄16 123⁄8 127⁄16 121⁄2 125⁄16 123⁄8 L M 73⁄16 613⁄16 67⁄8 91⁄2 87⁄8 91⁄2 91⁄8 81⁄8 1013⁄16 111⁄2 1111⁄16 115⁄8 1115⁄16 M N 613⁄16 65⁄16 63⁄4 81⁄2 81⁄4 9 83⁄4 97⁄8 101⁄2 111⁄16 107⁄8 107⁄8 N P 1¼ Bore 63⁄8 53⁄4 63⁄16 83⁄16 71⁄2 85⁄8 85⁄16 91⁄8 101⁄4 101⁄2 913⁄16 1¼ Bore P Q 63⁄16 51⁄8 53⁄4 81⁄4 73⁄4 85⁄16 93⁄8 10 Q R 45⁄8 8 75⁄8 R S 71⁄8 71⁄8 S T 63⁄4 T U 13 13 16 U V 125⁄16 123⁄8 143⁄4 V W
15⁄8 Bore 115⁄8 1115⁄16 137⁄8
15⁄8 Bore W
X 107⁄8 107⁄8 X Y 101⁄2 913⁄16 Y Z 10 Z Use Impellers with 11⁄4" Ø bores., Use Impellers with 11⁄4" Ø bores., Use Impellers with 15⁄8" Ø bores., Use Impellers with 7⁄8" Ø bores., FRM Option, FRM Option, Opción FRM Use Impellers with 7⁄8" Ø bores., Utilice con impulsores de 7⁄8" de diámetro interior. Utilice con impulsores de 11⁄4" de diámetro interior. Utilice con impulsores de 11⁄4" de diámetro interior. Utilice con impulsores de Utilice con impulsores de 7⁄8" de diámetro interior. Opción FRM 15⁄8" de diámetro interior.
�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0
20
0
20
0
1206040200
6 10 m3∨hr
U.S. GPM
14 16
200
5
15
10
12842
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
160
140
120
100
80 100
40
60
80
180
60
4046
% EFF
8'
11∨2 HP
50A 63/4'' DIA.
B 57/8
C 51/4
D 413/16
54
10'
5 HP
3 HP
2 HP
1 HP
56 58
58
60 20'
E 43/8
Model 22BZ / Size (Tamaño) 1 x 2 – 73500 RPM Curve (Curva) CN0725R00
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operación más alláde la curva impresa de H-Q (carga-capacidad).
6' NPSHR – FEET (PIES)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 63⁄4" B 57⁄8 C 51⁄4
7⁄8" D 413⁄16
E 43⁄8
NOTE: Pump will pass a sphere to 3⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄16 de pulgada de diámetro.
0
50
0
90
0
120706040200
10 m3∨hr
U.S. GPM
20 25
10 30 50
300
50
10
155
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
250
200
150
100
80 90 110100
20
30
40
60
70
80
30 35 4045 % EFF
6'
71∨2 HP
50
A 81/16'' DIA.
B 75/16
C 61/2
D 53/8
50
10'
10 HP
5 HP
3 HP
Model 9BZ / Size (Tamaño) 1 x 2 – 83500 RPM Curve (Curva) CN0722R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
4' NPSHR – FEET (PIES)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 81⁄16" B 75⁄16
C 61⁄2
7⁄8"
D 53⁄8
NOTE: Pump will pass a sphere to 3⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄16 de pulgada de diámetro.
�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
A 515/16" DIA.
B 51/8" % EFF
NPSHR – FEET (PIES)
3BZ, 3FE / Size (Tamaño) 11∨2 x 2 – 63500 RPM Curve (Curva) CN0747R00
5040
60 65
70
70
72
7273
65
5.5'
10' 12'
14'16'
18'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de la curvaimpresa de H-Q (carga-capacidad).
5 HP
3 HP
0
40
80
120
160
0
10
20
30
40
50
0
18016012080400
10 20 m3∨hr
U.S. GPM
30 40
20 60 100 140
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
6'8'7'
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 515⁄16" 7⁄8" B 51⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
A 515/16" DIA.
B 55/8"
NPSHR – FEET (PIES)
0
40
80
120
160
0
10
20
30
40
50
0
12080400
10 20 m3∨hr
U.S. GPM
30
20 60 100 160140
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
% EFF
3BZ, 3FE / Size (Tamaño) 11/2 x 2 – 6H3500 RPM Curve (Curva) CN0748R00H = High Head Impeller H = Impulsor de carga alta
3 HP
40
5.5'
8'
10'
12'
14'16'
18'
40
50
50
60
60
65
65
67
67
6'
7'
NOTE: Not recommended for operation beyondprinted H-Q curve.May utilize 1.15 motor service factor.
NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).Puede utilizar factor de servicio 1.15.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 515⁄16" 7⁄8" B 51⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
10GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
D 67/8"
B 73/4"
15 HP
% EFF
Model 5BZ, 5FE / Size (Tamaño) 11/2 x 2 – 83500 RPM Curve (Curva) CN0730R00
A 81/16" DIA.
50
7 1∨2 HP
10 HP
10'
5 HP
20 HP
504060
60
65
65
67
70
8'12' 14'
16'
18'
20'22'
F 61/4"
G 53/4"
NPSHR – FEET (PIES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
0
50
100
300
0
20
60
80
0
250150500
10 20 m3∨hr
U.S. GPM
60
100 200
30 40 50
250
200
150
40
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 81⁄16" B 73⁄4 D 67⁄8
7⁄8" F 61⁄4 G 53⁄4
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
00
0
0
m3∨hr10
100
50
100
250
10
20
30
50
70
90
40
U.S. GPM
150
200
40035030025020015050
60
20 30 40 50 60 70 80
Model 4BZ/4FE / Size (Tamaño) 21/2 x 3 – 73450 RPM Curve (Curva) CN0709R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
64
6'60
70
68
71
10'12' 14'
68
70
71
NPSHR – FEET (PIES)
8'
16' 18'
5 HP
7.5 HP
10 HP
15 HP
A 71/16'' DIA.B 67/8''
C 6''
D 57/16''
E 43/4''
F 41/16''
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 71⁄16" B 67⁄8 C 6 7⁄8" D 57⁄16
E 43⁄4 F 41⁄16
NOTE: Pump will pass a sphere to 7⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄16 de pulgada de diámetro.
11GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
% EFF
Model 6BZ, 6FE / Size 3 x 4-73500 RPM Curve (Curva) CN0727R00
B 63/8" DIA.
7 1/2 HP
E 51/8"
D 51/2"
10 HP
6'
50
15 HP
50
60
60 65
65
68
68 70
70
8'
10'12'
74
NPSHR – FEET (PIES)
NOTE: Not recommended for operation beyondprinted H-Q curve.May utilize 1.15 motor service factor.
NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).Puede utilizar factor de servicio 1.15.
0
25
75
175
0
20
40
0
6000
10 20 m3∨hr
U.S. GPM
150
100 200
30 40 50
150
125
10030
500400300
1007060
10
50
60
1401301201109080
50
200
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
B 63⁄8" D 51⁄2
7⁄8" E 51⁄8
NOTE: Pump will pass a sphere to 1⁄2" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 1⁄2 de pulgada de diámetro.
00
0
0
m3∨hr20
20
40
60
140
60
80
U.S. GPM
50
50
500
300100 150
250
200
150
100
200 250
300
350
400
450
120
100
40
508'K 101/16'' DIA.
L 93/8''
N 81/4''
58
54
60
16'
12'
E&P 71/2''
M 87/8''
60
58
54
10'
Model 8BZ, 8FE / Size (Tamaño) 11/2 x 2 – 103500 RPM Curve (Curva) CN0713R00
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
25 HP20 HP
15 HP
40 HP
30 HP
14'
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 101⁄16" L 93⁄8 M 87⁄8 11⁄4" N 81⁄4 P 71⁄2 E 71⁄2
7⁄8"
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0
0 40
400150100500
40
60 100
250
0
80
Model 7BZ, 7FE / Size (Tamaño) 21/2 x 3 – 83500 RPM Curve (Curva) CN0701R00
m3∨hr
U.S. GPM
200
100
80
300
60
50
150
200 250 300 350
20
20
50
NOTE: Not recommended for operation beyond printed H-Q curve.NOTA: No se recomienda para funcionamiento superior al impresoen la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
A&K 715/16" DIA.
C&M 73/16"
E&P 63/8"
25 HP
20 HP
15 HP
70
65
60
737578
15' 18'
75
10'
7812'
607'
65 70
73
8'
40% EFF
NPSHR – FEET (PIES)6'
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 715⁄16" M 73⁄16 11⁄4" P 63⁄8
A 715⁄16
C 73⁄16 7⁄8"
E 63⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
0
0
3002001000
250
0
180
Model 21BZ / Size (Tamaño) 21/2 x 3 – 93550 RPM Curve (Curva) CN0715R00
m3∨hr
U.S. GPM
150
50
90
70
400 500 600 700
40 80 160140120100
200
10020
30
6020
800
200
450
80
60
50
40
10
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
400
350
300
60 % EFF
65
68
70
65
8' NPSHR – FEET (PIES)
10'14'
16'
20'
50 HP
40 HP
30 HP
25 HP20 HP
60 HP
K 101/16" DIA.L 97/8"
M 91/2"
N 81/2"
P 83/16"
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 101⁄16" L 97⁄8 M 91⁄2 11⁄4" N 81⁄2 P 83⁄16
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0
0
8003002001000
500
0
175
Model 11BZ, 11FE / Size (Tamaño) 21/2 x 3 – 103550 RPM Curve (Curva) CN0717R00
m3∨hr
U.S. GPM
300
100
180
80
400 500 600 700
75 150125100
400
200
40
60
5025
120
100
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
75 HP
60 HP
50 HP
40 HP
30 HP
K 101/16" DIA.
L 95/8"
N 9"
P 85/8"
R 8"
S 71/8"
10'12' 14' 16'
18'20'
22'
NPSHR – FEET (PIES)
64 % EFF70 72 74
76
7674
25 HP
140
160
20
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 101⁄16" L 95⁄8
N 9 11⁄4" P 85⁄8 R 8 S 71⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
00
0
0
m3∨hr50 125100 150
20
60
80
175
40
U.S. GPM
50
100 200
300
800300 400 500
250
200
150
100
600 700
25 75
73
68 11'K 715/16'' DIA.
L 71/4''
N 65/16''
F&Q 51/8''
76
7358
76
16'
13'
18'
E&P 53/4''
M 613/16''
G&R 45/8''
Model 16BZ, 16FE / Size (Tamaño) 3 x 4 – 83500 RPM Curve (Curva) CN0692R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
25 HP
20 HP
15 HP
40 HP
30 HP
10 HP
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 715⁄16" L 71⁄4 M 613⁄16 N 65⁄16 11⁄4" P 53⁄4 Q 51⁄8 R 45⁄8 E 53⁄4 F 51⁄8
7⁄8" G 45⁄8
NOTE: Pump will pass a sphere to 3⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄8 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
00
0
0
m3∨hr50 150100
20
40
80
120
200
60
U.S. GPM
50
100 200
400
1000300 400
300
500
350
250
200
150
100
600 700 800 900
100
78
80
70 10'M 91/8'' DIA.
80
L 83/4''
Q 73/4''
T 63/4''
7674
60
70
7476
78
11'13'
15'
S 71/8''
P 85/16''
Model 12BZ, 12FE / Size (Tamaño) 3 x 4 – 103550 RPM Curve (Curva) CN0694R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
75 HP
60 HP
50 HP
40 HP
30 HP
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
M 91⁄8" N 83⁄4
P 85⁄16 11⁄4" Q 73⁄4 S 71⁄8 T 63⁄4
NOTE: Pump will pass a sphere to 1⁄2" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 1⁄2 de pulgada de diámetro.
00
0
0
m3∨hr25050 150
200
300
100 200
40
50
60
80
90
300
70
U.S. GPM1400
50
400 600 800
250
200
150
100
12001000
30
20
10
7580
787060
8284
84
82
20'
22'
24'
K 77/8'' DIA.
L 73/8''
N 63/4''
P 63/16''
Q 53/4''
Model 10BZ, 10FE / Size (Tamaño) 4 x 5 – 83550 RPM Curve (Curva) CN0699R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
60 HP
50 HP
40 HP
30 HP
NPSHR – FEET (PIES)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 77⁄8" L 73⁄8
N 63⁄4 11⁄4" P 63⁄16
Q 53⁄4
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0 10
120100806040200
30% EFF NPSHR – FEET (PIES)
0
B 37/8"15
180
20 30
10
50
40
10
0
3∨4 HP
43
51BZ, 51FE / Size (Tamaño) 2 x 2-5RPM 3450 Curve (Curva) CN0703R00
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
m3∨hr
U.S. GPM
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
140 160
40
30
20
5
A 4" DIA.
50 5560
60
64
64
5'
6'
7'
9'
1 1∨2 HP
1 HP
2 HP
C 31/2"
D 31/4"
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 4" B 37⁄8" 7⁄8" C 31⁄2" D 31⁄4
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
0
24020016012080400
40% EFF NPSHR – FEET (PIES)
0
B 315/16"
15
10
40
10
0
1 1∨2 HP
52BZ, 52FE / Size (Tamaño) 21/2 x 21/2-5RPM 3450 Curve (Curva) CN0705R00
m3∨hr
U.S. GPM280 320
80
5
A 43/16" DIA.
13'
50
30
20
10
360
20 30 40 50 60 70
1 HP
2 HP
3 HP
11'
9'50
60
60
65
65
72
72C 33/4"
D 39/16"
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 43⁄16" B 315⁄16 7⁄8" C 33⁄4 D 39⁄16
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0
300250200150100500
40% EFF
NPSHR – FEET (PIES)
0
B 43/16"
15
20
0
2 HP
53BZ, 53FE / Size (Tamaño) 3 x 3-5RPM 3450 Curve (Curva) CN350R00
m3∨hr
U.S. GPM350 400
100
A 43/8" DIA.
C 4"
D 313/16"
450
60 80
12'
5
50
40
30
20
10
10
40
5260
68
14'
18'
68
74
74
3 HP
5 HP
E 35/8"
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 43⁄8" B 43⁄16
C 4 7⁄8" D 313⁄16 E 35⁄8
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
0
3002502001501005000
15
20
0
54BZ, 54FE / Size (Tamaño) 4 x 4-5RPM 3450 Curve (Curva) CN666R00
m3∨hr
U.S. GPM350 400
140
700
60 80
5
50
40
30
20
10
10
40
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
450 500 550 600 650
60
120100
20
B 45/8"
A 413/16" DIA.
C 41/2"
D 43/16"E 4"
5 HP
3 HP
7 1∨2 HP
55% EFF60 66
7072
747274
70
66
60
NPSHR – FEET (PIES)10'18'
22'26'
28'
14'
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 413⁄16" B 45⁄8 C 41⁄2
7⁄8" D 43⁄16 E 4
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
0
20
0
14
0
603020100
6 10 m3∨hr
U.S. GPM
12
2
12
10
842
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
40 50
25
30
35
50
45
40
15
10
5
4
6
8
1∨2 HP
3∨4 HP
18'
11'
55
55
40 % EFF 47 52A 63/4'' DIA.
B 57/8
C 51/4
D 413/16
E 43/8
Model 22BZ / Size (Tamaño) 1 x 2 – 71750 RPM Curve (Curva) CN0726R00
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda la operación más alláde la curva impresa de H-Q (carga-capacidad).
2' NPSHR – FEET (PIES)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 63⁄4" B 57⁄8 C 51⁄4
7⁄8" D 413⁄16
E 43⁄8
NOTE: Pump will pass a sphere to 3⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄16 de pulgada de diámetro.
Performance CurvesCurvas de desempeño
0
30020010000
15
0
55BZ, 55FE / Size (Tamaño) 5 x 5-6RPM 3450 Curve (Curva) CN669R00
m3∨hr
U.S. GPM400
200
1000
50
5
50
40
30
20
10
10
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
500 600 700 800 900
60
150100
20
70
C 5" x 37/8"
B 55/16" x 45/16"
D 5" x 39/16"
E 5" x 31/32"
71∨2 HP10 HP
54% EFF 6065
70
72
68
72
68
70
65
62 NPSHR – FEET (PIES)15' 18'
20'
26'
24'
15 HP
A 51/2" x 41/2" DIA.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 51⁄2" x x 41⁄2" B 55⁄16 x 45⁄16
C 5 x 37⁄8 7⁄4" D 5 x 39⁄16 E 5 x 31⁄32
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
0
10
0
20
0
75706040200
6 10 m3∨hr
U.S. GPM
14 16
10 30 50 65
20
40
30
70
5
50
60
15
10
45255 15 35 55
12842
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
25 30 3540
45
% EFF
4'
45
1 1∨2 HP
1 HP
3∨4 HP
1∨2 HP
20A 81/16'' DIA.
B 75/16
C 61/2
D 53/8
Model 9BZ / Size (Tamaño) 1 x 2 – 81750 RPM Curve (Curva) CN0723R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
NPSHR – FEET (PIES) 3’
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 81⁄16" B 75⁄16
C 61⁄2
7⁄8"
D 53⁄8
NOTE: Pump will pass a sphere to 3⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄16 de pulgada de diámetro.
3BZ, 3FE / Size (Tamaño) 11∨2 x 2 – 61750 RPM Curve (Curva) CN0749R00
3'
3∨4 HP
1∨2 HP
4'
5'
9'
50
60
65
68
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
68
5
10
15
2
10
0
90806040200
5 10 m3∨hr
U.S. GPM
15 20
10 30 50 70
20
25
30
35
4
6
8
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
% EFF 50
A 515/16" DIA.
B 51/8"
NPSHR – FEET (PIES)
6065
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 515⁄16" 7⁄8" B 51⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
1�GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
A 515∨16" DIA.
B 55∨8"
% EFF
3BZ, 3F / Size (Tamaño) 11∨2 x 2 – 6H1750 RPM Curve (Curva) CN0750R00H = High Head Impeller H = Impulsor de carga alta
403'
1∨2 HP
50
50
55
5560
60
66
664'
5'
6'
7'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
NPSHR – FEET (PIES)
5
10
15
2
10
0
806040200
5 10 m3∨hr
U.S. GPM
15 20
10 30 50 70
20
25
30
35
4
6
8
9
7
5
3
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 515⁄16" 7⁄8" B 51⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
A 81/16" DIA.
C 75/8"
E 63/4"
G 53/4"
% EFF
NPSHR – FEET (PIES)
Model 5BZ, 5FE / Size (Tamaño) 11/2 x 2 – 81750 RPM Curve (Curva) CN0729R00
50 3'
3/4 HP
1 HP
2 HP
1 1/2 HP
60
60
70
70
72
5'
7'
11'
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
20
30
5
20
0
16012080400
10 20 m3∨hr
U.S. GPM
30 40
20 60 100 140
40
50
60
70
10
15
10
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 81⁄16" C 75⁄8 7⁄8" E 63⁄4 G 53⁄4
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
�0GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
0
30
40
0
0
0
m3∨hr
20 100
60
10
12
16
18
45
14
U.S. GPM
20
200
50
10
120 140 160 18040 60 80
2
4
6
8
403530252015105
64 6668
70
60
7068
66
64
Model 4BZ/4FE / Size (Tamaño) 21/2 x 3 – 71750 RPM Curve (Curva) CN0711R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
1/2 HP
3' NPSHR – FEET (PIES)
4'5'
6'
11/2 HP
2 HP
3/4 HP1 HP
C 6''
D 57/16''
A 71/16" DIA.
B 67/8"
E 43/4''
F 41/16''
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 71⁄16" B 67⁄8 C 6 7⁄8" D 57⁄16
E 43⁄4 F 41⁄16
NOTE: Pump will pass a sphere to 7⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄16 de pulgada de diámetro.
A 71/16" DIA.
B 63/8"
E 51/8"
NPSHR – FEET (PIES)
% EFF
Model 6BZ, 6FE / Size (Tamaño) 3 x 4 – 71750 RPM Curve (Curva) CN0728R00
355'
1 1∨2 HP 1 HP
2 HP
3 HP
4860
60
65
65
67
67
4'
8'
16'
C 6"
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda la operación más allá de lacurva impresa de H-Q (carga-capacidad).
10
20
0
15
0
3002001000
10 20 m3∨hr
U.S. GPM
40 90
50 150 250 350
30
40
50
0
10
5
30 50 60 70 80
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 71⁄16" B 63⁄8 7⁄8" C 6 E 51⁄8
NOTE: Pump will pass a sphere to 1⁄2" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 1⁄2 de pulgada de diámetro.
�1GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
00
0
0
m3∨hr2010
10
20
30
40
30
U.S. GPM
25
25
150
15050 75 100 125
100
125
50
75
Model 8BZ, 8FE / Size (Tamaño) 11/2 x 2 – 101750 RPM Curve (Curva) CN0714R00
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
50
5048 52
52
54
54
56
46
5'
6'
7'
2 HP
3 HP
5 HP
A 101/16'' DIA.
B 93/8''
D 81/4''
E 71/2''
C 87/8''
NPSHR – FEET (PIES)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 101⁄16" B 93⁄8 C 87⁄8 7⁄8" D 81⁄4 E 71⁄2
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
00
0
0
m3∨hr10
10
15
20
50
U.S. GPM
10
50 250100 150 200
80
70
60
50
40
30
205
20 30 40
70
4'
A 715/16'' DIA.
B 75/8''
F 63/16''
7674
60
D 613/16''
78
78
6'
8'
66
7674
Model 7BZ, 7FE / Size (Tamaño) 21/2 x 3 – 81750 RPM Curve (Curva) CN0702R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
11/2 HP
2 HP
3 HP
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 715⁄16" B 75⁄8 7⁄8" D 613⁄16
F 63⁄16
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
0
0
1501005000
90
Model 21BZ / Size (Tamaño) 21/2 x 3 – 91750 RPM Curve (Curva) CN0716R00
m3∨hr
U.S. GPM
20
30
200 250 300 350
20 40 80706050
100
20
3010
400
100
120
10
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
64 % EFF 6566
70
A&K 101/16" DIA.
B&L 97/8"C 91/2"
D 81/2"
E 83/16"
3 HP
5 HP
71∨2 HP
4'
8'
40
60
80
NPSHR – FEET (PIES)3'
70
68
68
5'
66
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 101⁄16" B 97⁄8 C 91⁄2 7⁄8" D 81⁄2 E 83⁄16
K 101⁄16 11⁄4" L 97⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
Model 11BZ, 11FE / Size (Tamaño) 21/2 x 3 – 101750 RPM Curve (Curva) CN0751R00
10
0
4002001500
15
5
90 m3∨hr
U.S. GPM
60
35130
20
250 300 350
20 60
3010
40
50
10050
40 503010 8070
70
80
90
110
100
20
25
30
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
120
00
10 HP
71∨2 HP
5 HP3 HP
A&K 101/16" DIA.
B&M 91/2"
C 81/4"
D 71/8"
6' NPSHR – FEET (PIES)
8'
10'
62 % EFF65
70
7272
70
65
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 101⁄16" B 91⁄2 7⁄8" C 81⁄4 D 71⁄8 K 101⁄16 11⁄4" M 91⁄2
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
00
0
0
m3∨hr20
10
20
30
50
70
100
40
U.S. GPM
50
50 450100 150 350
250
300250200 400
200
150
100
60
40 60 80
60
8'
K 131/16'' DIA.
L 123/8'' DIA.
N 97/8'' DIA.
64
62
50
M 1013/16'' DIA.
10'56
6462
60
12'
Model 13BZ, 13FE / Size (Tamaño) 21/2 x 3 – 131750 RPM Curve (Curva) CN0718R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
10 HP
71/2 HP
15 HP
20 HP
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 131⁄16" L 123⁄8 M 1013⁄16
11⁄4"
N 97⁄8
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
00
0
0
m3∨hr20 6040
10
15
20
80
U.S. GPM
20
100 200
80
60
40
400250 300 350
70
10
50
30
15050
5
73
554'
A 715/16'' DIA.
5'
76
B 71/4''
E 53/4''
G 45/8''
6865
7673
68
65
6'
C 613/16''
D 65/16''
F 51/8''
Model 16BZ, 16FE / Size (Tamaño) 3 x 4 – 81750 RPM Curve (Curva) CN0693R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
5 HP
11/2 HP
3 HP
2 HP
1 HP
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 715⁄16" B 71⁄4
C 613⁄16
D 65⁄16 7⁄8"
E 53⁄4 F 51⁄8 G 45⁄8
NOTE: Pump will pass a sphere to 3⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄8 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
00
0
0
m3∨hr15050 100 125
10
20
30
60
175
U.S. GPM
80
800100 200 600
200
500400300 700
180
120
100
160
140
60
40
20
50
40
7525
60 4'K 131/16'' DIA.
L 127/16''
P 91/8''
78
7075
70
7578
5'6'
8'
M 111/2''
N 101/2''
Q 85/16''
Model 14BZ, 14FE / Size (Tamaño) 3 x 4 – 131750 RPM Curve (Curva) CN0719R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
10 HP
71/2 HP
15 HP
20 HP
25 HP
30 HP
Performance Curves Curvas de desempeño
00
0
0
m3∨hr10050
10
20
30
125
U.S. GPM
20
100 200
120
80
60
40
600300 400
100
500
7525
78
80
75
70 6'
10'
K 101/16'' DIA.8'
80
A&L 93/4''
B 83/4''
C 75/8''
7875
70
Model 12BZ, 12FE / Size (Tamaño) 3 x 4 – 101750 RPM Curve (Curva) CN0695R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
5 HP
10 HP
71/2 HP
15 HP
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 101⁄16" 11⁄4" L 93⁄4 A 93⁄4 B 83⁄4 7⁄8" C 75⁄8
NOTE: Pump will pass a sphere to 1⁄2" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 1⁄2 de pulgada de diámetro.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 131⁄16" L 127⁄16
M 111⁄2 11⁄4" N 101⁄2
P 91⁄8 Q 85⁄16
NOTE: Pump will pass a sphere to 3⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 3⁄8 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
00
0
0
m3∨hr50
100
100
10
15
20
150
U.S. GPM
10
200 300 400
70
60
50
40
30
20
700500 600
5
75 80787060
82
8'
10'
A&K 77/8'' DIA.
B 67/8''
C 53/4''
Model 10BZ, 10FE / Size (Tamaño) 4 x 5 – 81750 RPM Curve (Curva) CN0700R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
71/2 HP
3 HP
5 HP
Performance CurvesCurvas de desempeño
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 77⁄8" B 67⁄8
7⁄8" C 53⁄4 K 77⁄8 1¼"
NOTE: Pump will pass a sphere to 5⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄16 de pulgada de diámetro.
0
30
60
70
50
40
0
0
8000
m3∨hr250
600400
50 150
200 1000
80
90
1200
100 200
100
110
10
15
20
30
35
300
25
U.S. GPM
L 99/16''
M 81/8''
10 HP
15 HP
20 HP
75
80
14'
82
83
10'
838280
7570
8'
60K 101/16'' DIA.
Model 17BZ / Size (Tamaño) 4 x 6 – 101750 RPM Curve (Curva) CN0720R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.METERS
METROSFEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 101⁄16" L 99⁄16 11⁄4" M 81⁄8
NOTE: Pump will pass a sphere to 7⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄16 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
00
0
0
m3∨hr50 150100 200
10
20
30
50
60
250
40
U.S. GPM
20
200 400
200
80
60
40
1200600 800 1000
180
160
140
120
100
7680
84
82
6'10'K 131/16'' DIA.
Q 93/8''
8'
12'
82
80
L 121/2''
M 1111/16''
N 111/16''
P 101/4''
76
Model 15BZ, 15FE / Size (Tamaño) 4 x 6 – 131750 RPM Curve (Curva) CN0698R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
15 HP
20 HP
25 HP
30 HP
40 HP
50 HP
Performance Curves Curvas de desempeño
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 131⁄16" L 121⁄2 M 1111⁄16 11⁄4" N 111⁄16
P 101⁄4 Q 93⁄8
NOTE: Pump will pass a sphere to 7⁄16" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄16 de pulgada de diámetro.
m3∨hr
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0 U.S. GPM600
125
175
50
200 400
150
800 12001000
250
75
25
1400 1600 1800 2000 2200
200
0
10
20
30
40
50
60
70
0 10050 150 200 250 300 350 400 450 500
Model 18BZ / Size (Tamaño) 6 x 8 – 13RPM 1780 Curve (Curva) CN0697R00
60 HP
50 HP
40 HP30 HP
75 HP
60% EFF. 7074 78
8482
85
8584
82
U 13" DIA.
M&W 115/8"
N&X 107/8"
Q&Z 10"
4' NPSHR – FEET (PIES)
5'7'
9'
11'
V 125/16"
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
U 13" V 125⁄16
W 115⁄8 15⁄8" X 107⁄8 Z 10 M 115⁄8 N 107⁄8 11⁄4" Q 10
NOTE: Pump will pass a sphere to 7⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄8 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0
40
60
0
0
0
m3∨hr400200
500 1000
80
3000
100 300
100
180
10
20
40
50
1100
30
U.S. GPM
20
120
140
160
500040001500 2000 2500 3500 4500
1000500 600 700 800 900
11'64 7075 78
8084
84
80
14'17'
20'
24'
Model 19BZ / Size (Tamaño) 8 x 10 – 13RPM 1750 Curve (Curva) CN0707R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
150 HP
125 HP
100 HP
75 HP
60 HP
U 13'' DIA.
W 1115/16''
X 107/8''
Y 913/16''
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
U 13" W 1115⁄16 15⁄8" X 107⁄8
Y 913⁄16
NOTE: Pump will pass a sphere to 7⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄8 de pulgada de diámetro.
00
0
0
m3∨hr50 150100 200
20
40
60
90
250
80
U.S. GPM
50
200
350
1200400
300
250
200
150
100
600 800 1000
10
30
50
70
70
5'
7374
65
74
73
6'
8'
Model 20BZ / Size (Tamaño) 4 x 6 – 161780 RPM Curve (Curva) CN0696R00
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
NPSHR – FEET (PIES)
75 HP
60 HP
50 HP
U 16'' DIA.
V 143/4''
W 137/8''
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
U 16" V 143⁄4 15⁄8" W 137⁄8
NOTE: Pump will pass a sphere to 5⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄8 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
0 5
6050403020100
30% EFF
NPSHR – FEET (PIES)
0
4
10 15
103
0
1∨4 HP
51BZ, 51FE / Size (Tamaño) 2 x 2-5RPM 1725 Curve (Curva) CN0704R00
m3∨hr
U.S. GPM70 80
20
5
2
A 4" DIA.
3'
5'
6'
40
30
48
52
5256
56
4840
1
C 31/2"
D 31/4"
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 4" C 31⁄2
7⁄8" D 31⁄4
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
0
120100806040200
40% EFF NPSHR – FEET (PIES)
0
B 315/16"
4
10
10
0
1∨4 HP
52BZ, 52FE / Size (Tamaño) 21/2 x 21/2-5RPM 1725 Curve (Curva) CN0706R00
m3∨hr
U.S. GPM140 160
40
1
A 43/16" DIA.
5
180
20 30
4'
3
2
5060
64
64
60
67
67
4.5'
5'
6'
1∨2 HP
1∨3 HP
C 33/4"
D 39/16"
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 43⁄16" B 315⁄16 7⁄8" C 33⁄4
D 39⁄16
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
��GOULDS PUMPSAg./Irrigation
Performance Curves Curvas de desempeño
0
1501251007550250
40% EFF NPSHR – FEET (PIES)
0
B 43/16"
4
10
0
53BZ, 53FE / Size (Tamaño) 3 x 3-5RPM 1725 Curve (Curva) CN351R00
m3∨hr
U.S. GPM175 200
50
A 43/8" DIA.
C 4"
D 313/16"
E 35/8"
225
30 40
4'
1
10
5
20
50
1∨4 HP
3
2
60
68
68
74
74
6'
10'
1∨3 HP
1∨2 HP
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 43⁄8" B 43⁄16
C 4 7⁄8" D 313⁄16
E 35⁄8
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
0
1501005000
10
0
54BZ, 54FE / Size (Tamaño) 4 x 4-5RPM 1725 Curve (Curva) CN667R00
m3∨hr
U.S. GPM200
70
350
30 40
4
12
10
20
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
250 300
14
6050
2
4
6
8
3
2
1 1∨2 HP
3∨4 HP
60% EFF 64 70 72
72
70
64
60
3'NPSHR – FEET (PIES) 4'
6'
8'10'B 45/8"
A 413/16" DIA.
C 41/2"
D 43/16"E 4"
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 413⁄16" B 45⁄8 C 41⁄2
7⁄8" D 43⁄16
E 4
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
�0GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
m3∨hr
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
00 U.S. GPM600 1600
60
200 400 800 12001000
90
80
40
1400
20
70
50
30
10
0
10
5
15
20
25
0 10050 150 200 250 300 350
Model 18BZ / Size (Tamaño) 6 x 8 – 13RPM 1180 Curve (Curva) CN0732R00
K 13" Dia.
L 125/16"
M 115/8"
P 101/2"
Q 10"
2' NPSHR – FEET (PIES)60% EFF. 70
843' 86
84
80
4'
25 HP
20 HP
15 HP
10 HP7.5 HP
86
80
70
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 13" L 125⁄16
M 115⁄8 11⁄4" P 101⁄2
Q 10
NOTE: Pump will pass a sphere to 7⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄8 de pulgada de diámetro.
0
15010050000
55BZ, 55FE / Size (Tamaño) 5 x 5-6RPM 1725 Curve (Curva) CN671R00
m3∨hr
U.S. GPM200
100
500
25
5
18
16
14
12
10
METERSMETROS
FEETPIES
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INAM
ICA
TOTA
L)
CAPACITY (CAPACIDAD)
NOTE: Not recommended for operation beyond printedH-Q curve.NOTA: No se recomienda para funcionamiento superior alimpreso en la curva H-Q.
250 300 350 400 450
7550
8
6
4
2
4
3
2
1
C 5" x 37/8"
B 55/16" x 45/16"
D 5" x 39/16"
E 5" x 31/32"
NPSHR – FEET (PIES)7'8'
9'
50% EFF 6065
70
68
68 70
65
1 HP
11∨2 HP
A 51/2" x 41/2" DIA.
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
A 51⁄2" x x 41⁄2" B 55⁄16 x 45⁄16
C 5 x 37⁄8 7⁄8" D 5 x 39⁄16 E 5 x 31⁄32
NOTE: Pump will pass a sphere to 5⁄32" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 5⁄32 de pulgada de diámetro.
�1GOULDS PUMPSAg./Irrigation
m3∨hr
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
METERSMETROS
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DYN
AMIC
HEA
D (C
ARGA
DIN
ÁMIC
A TO
TAL)
00 U.S. GPM500 3500
60
25002000
80
40
3000
20
70
50
30
10
150010000
10
5
15
20
0 100 200 300 400 500 600 700
Model 19BZ / Size (Tamaño) 8 x 10 – 13RPM 1180 Curve (Curva) CN0731R00
K 13" Dia.
N 107/8"
P 913/16"
L 123/8"
M 1115/16"
3' NPSHR – FEET (PIES)60% EFF.
70 5'80
85
868'
85
8010'
30 HP
15 HP
20 HP
25 HP
40 HP
Performance Curves Curvas de desempeño
Optional ImpellerImpulsor optativo
Ordering Code Dia. Shaft Dia. Código de pedido Diá. Shaft Dia.
K 13" L 123⁄8 M 1115⁄16 11⁄4" N 107⁄8
P 913⁄16
NOTE: Pump will pass a sphere to 7⁄8" diameter.
NOTA: La bomba dejará pasar una esfera de hasta 7⁄8 de pulgada de diámetro.
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.FEET
PIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
Model 8BZ, 8BF Variable SpeedSize (Tamaño) 11/2 x 2 – 10 (Velocidad variable)101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0733R00
0
100
750U.S. GPM
25 10050 125 150 175 200
200
300
400
30
20
10
0
2400 RPM
2200 RPM
2000 RPM
1800 RPM
5 HP
10 HP
30% EFF.35
40
45
50
45
1600 RPM
��GOULDS PUMPSAg./Irrigation
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operationbeyond printed H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
Model 21BZ Variable SpeedSize (Tamaño) 21/2 x 3 – 9 (Velocidad variable)101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0735R00
0
100
0 U.S. GPM100 400 500 600 700
200
250
300
3020100
150
50
200 300
400
350
2400 RPM
2200 RPM
2000 RPM
1800 RPM
1600 RPM
10 HP
15 HP
20 HP
66
66
70
60
60% EFF.
Performance CurvesCurvas de desempeño
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
Model 7BZ, 7FE Variable SpeedSize (Tamaño) 21/2 x 3 – 8 (Velocidad variable)715/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0734R00
0
100
0 U.S. GPM50 100 300 350 400 450
200
250 30
20
10
0
150
50
150 200 250
2400 RPM
2200 RPM
2000 RPM
5 HP
10 HP
50% EFF.60
6570
75
1800 RPM
3 HP
7.5 HP1600 RPM
��GOULDS PUMPSAg./Irrigation
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
Model 13BZ, 13F Variable SpeedSize (Tamaño) 21/2 x 3 – 13 (Velocidad variable)131/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0737R00
400
0
100
0 U.S. GPM100 500 600 700
200
250
350
3020100
150
50
200 300 400
300
15 HP
20 HP
25 HP
30 HP
40 HP
50
60
63
65
63
6050% EFF.
1600 RPM
1800 RPM
2000 RPM
2200 RPM
2400 RPM
50 HP
Performance Curves Curvas de desempeño
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.FEET
PIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)Model 11BZ, 11FE Variable SpeedSize (Tamaño) 21/2 x 3 – 10 (Velocidad variable)101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0736R00
0
100
0 U.S. GPM100 500 600 700 800
200
250
350
3020100
150
50
200 300 400
300
2400 RPM
2200 RPM
2000 RPM
1800 RPM
60% EFF.
65
65
68
60
10 HP
15 HP
20 HP
25 HP
1600 RPM
��GOULDS PUMPSAg./Irrigation
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0U.S. GPM
100 500 600 700 1400
200
250
350
30
20
10
0
150
50
200 300 400
300
800 900 1300120011001000
400
Model 12BZ, 12FE Variable SpeedSize (Tamaño) 3 x 4 – 10 (Velocidad variable)91/8 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0739R00
2200 RPM
2000 RPM
1800 RPM
1600 RPM
2400 RPM
60% EFF. 7075 78
7880
75
7060
30 HP10 HP
15 HP
20 HP
Performance CurvesCurvas de desempeño
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0 U.S. GPM100 500 600 700 900
200
250 3020
10
0
150
50
200 300 400
300
800
Model 16BZ, 16FE Variable SpeedSize (Tamaño) 3 x 4 – 8 (Velocidad variable)81/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0738R00
10 HP
15 HP
20 HP
7.5 HP
2400 RPM
2200 RPM
2000 RPM
1800 RPM
58% EFF.68
73 76
6873
58
5 HP
1600 RPM
��GOULDS PUMPSAg./Irrigation
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0 U.S. GPM600 1600
200
250 30
20
10
0
150
50
200 400 800 140012001000
Model 10BZ, 10FE Variable SpeedSize (Tamaño) 4 x 5 – 8 (Velocidad variable)77/8 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0741R00
2200 RPM
2000 RPM
1800 RPM
2400 RPM
1600 RPM
50% EFF.60
7075
82
80
80
75
70
71∨2 HP
10 HP
15 HP
20 HP
25 HP
Performance Curves Curvas de desempeño
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0U.S. GPM
600 1400
50
200 400
150
800 12001000
500
200
250
450
400
350
300
30
100 300 500 700 900 13001100
01020
Model 14BZ, 14FE Variable SpeedSize (Tamaño) 3 x 4 – 13 (Velocidad variable)131/16" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0740R00
30 HP
100 HP120 HP
20 HP
40 HP
50 HP
60 HP
75 HP
60% EFF.70 75
78
75
70
60
50
2200 RPM
2000 RPM
2400 RPM
1800 RPM
1600 RPM
2600 RPM
��GOULDS PUMPSAg./Irrigation
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamientosuperior al impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0U.S. GPM
600 2200
50
200 400
150
800 12001000
400
1400 1600
200
250
350
300
30
010
20
Model 15BZ, 15FE Variable SpeedSize (Tamaño) 4 x 6 – 13 (Velocidad variable)131/16" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0743R00
1800 2000
2000 RPM
1800 RPM
2200 RPM
1600 RPM
60% EFF.78
72
82
78
60
82
40 HP
100 HP
125 HP
50 HP
60 HP75 HP
2400 RPM
Performance CurvesCurvas de desempeño
FEETPIES
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0 U.S. GPM600 1600
200 3020100
50
200 400 800 140012001000
175
150
125
75
25
Model 17BZ Variable SpeedSize (Tamaño) 4 x 6 – 10 (Velocidad variable)101/16 Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0742R00
2200 RPM
2000 RPM
1800 RPM
1600 RPM
60% EFF.
7580
83
80
75
40 HP30 HP
15 HP
20 HP
50 HP
��GOULDS PUMPSAg./Irrigation
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0U.S. GPM
6000
50
500
150
1000
350
1500 2000 2500 3000 3500
200
250
325
300
4000 550050004500
3020100
25
75
125
175
225
275
Model 19BZ Variable SpeedSize (Tamaño) 8 x 10 – 13 (Velocidad variable)13" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0745R00
75 HP
100 HP
300 HP
150 HP
200 HP
250 HP
350 HP
2400 RPM
2000 RPM
1800 RPM
2200 RPM
1600 RPM
60% EFF.
7080
8586
85
80
Performance Curves Curvas de desempeño
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0U.S. GPM
600 3200
50
200 400
150
800 12001000
550
1400 1600 1800 2000 2200
200
250
500
450
400
350
300
2400 300028002600
3020100
Model 18BZ Variable SpeedSize (Tamaño) 6 x 8 – 13 (Velocidad variable)13" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0744R00
75 HP
100 HP
125 HP
150 HP
200 HP
250 HP
2600 RPM
2200 RPM
2000 RPM
2400 RPM
1800 RPM
60% EFF.70 75 82
8485
84
82
1600 RPM
��GOULDS PUMPSAg./Irrigation
Performance CurvesCurvas de desempeño
NPS
HR –
FEE
T (P
IES)
NOTE: Not recommended for operation beyondprinted H-Q curve.NOTA: No se recomienda para funcionamiento superioral impreso en la curva H-Q.
FEETPIES
CAPACITY (CAPACIDAD)
TOTA
L DY
NAM
IC H
EAD
(CAR
GA D
INÁM
ICA
TOTA
L)
0
100
0U.S. GPM
600 1600200 400 800 12001000
700
1400
200
400
300
0
10
15
600
500
5
Model 20BZ Variable SpeedSize (Tamaño) 4 x 6 – 16 (Velocidad variable)16" Dia. Impeller (Diá. Impulsor) Curve (Curva) CN0746R00
60% EFF. 6570 73
74
73
2200 RPM
1800 RPM
1600 RPM
2000 RPM
75 HP
100 HP
125 HP
50 HP
150 HP
175 HP
��GOULDS PUMPSAg./Irrigation
Materials of ConstructionMateriales de Construcción
Seal DesignDiseño del sello
��
��
��
MECHANICAL SEAL ASSEMBLY, INSTALACIÓN DEL SELLO MECÁNICO
PRIME SAFE SEAL ARRANGEMENT, ACCESORIO PRIME SAFE DEL SELLO
7
8
9
3 5
4 2 1
6 Location, Description, Ubicación Descripción 1 Stationary Face, Cara estacionaria
2 Rotating Face, Cara rotativa
3 Spring – 316SS, Resorte – 316SS
4
Bellows (Elastomer), Fuelle (Elastómero)
5
Retainer – 316SS, Dispositivo de retención – 316SS
6 Cup (Elastomer), Cubeta (Elastómero)
Location, Description, Ubicación Descripción Grease Feeder – shown, Canal de alimentación de grasa – aparece en el gráfico 7 Oiler – not shown (for 18BZ, 19BZ and 20BZ only), Engrasador – no aparece en el gráfico (únicamente para 18BZ, 19BZ y 20BZ)
8
Lip Seal – BUNA, Sello con reborde – BUNA
9
Gland – Aluminum, Casquillo – Aluminio
Mechanical Seal (seal code 8A or 8B), – Sello mecánico (código del sello 8A o 8B)
7⁄8" Impeller Bore 11⁄4" Impeller Bore 15⁄8" Impeller Bore and 11⁄4" Seal Bore and 15⁄8" Seal Bore, and 2" Seal Bore, Seal Code, Rotary, Stationary, Elastomers, Metal Parts, Diámetro interior, Diámetro interior, Diámetro interior, Código del sello Rotativo Estacionario Elastómeros Partes metálicas del impulsor 7⁄8" del impulsor 11⁄4" del impulsor 15⁄8" y diámetro interior y diámetro interior y diámetro interior del sello 11⁄4" del sello 15⁄8" del sello 2" 0 Ceramic, Cerámica BUNA-N 10K13 10K16 10K84 1 Carbon, Carbono EPR 10K19 10K20 NA 3
316SS 10K27 10K45 10K112
5 Sil-Carb., Viton
10K64 10K65 8A* Sil-Carb., Carburo de silicona NA NA 10K144 8B** Carburo de silicona 10K64 10K65 9† Packed Box with BUNA O-Ring, Caja prensaestopas con junta tórica de BUNA 15K17 15K3 15K4
* Prime Safe option with oiler, Opción Prime Safe con engrasador** Prime Safe option with grease, Opción Prime Safe con grasa† Not available for 51, 52, 53, 54, 55 (BZ, FE) sizes., No disponible para 51, 52, 53, 54, 55 (BZ, FE) tallas.
�0GOULDS PUMPSAg./Irrigation
CLose-Coupled Materials of ConstructionMateriales de construcción del acoplamiento corto
NOTE:Pumps will be shipped with top-vertical discharge position as standard. For other orientations, remove casing bolts – rotate discharge to desired position – replace and tighten bolts to 25 ft./lbs. Note that discharge may extend below motor mounting surface in bottom-horizontal position; adequate clearance must be provided.
NOTA:Las bombas salen de la fábrica con la des-carga orientada en posición vertical superior de manera estándar. Para modificar la orien-tación, retirar los pernos de la carcasa, hacer girar la descarga hasta la posición deseada y volver a colocar los pernos, ajustándolos a una torsión de 25 pies/libras. Se ha de notar que la descarga se puede extender por debajo de la superficie de montaje del motor en la posición horizontal inferior; por lo tanto, debe proveerse suficiente espacio.
For separate seal housing and adapter construction, all bronze material only, see repair parts page.
Para la construcción separada del compartimiento del sello y el adaptador, materiales de bronce únicamente, consul-te la página de piezas de repuesto.
1
AISI 1045 steel motor shaft exten-sion (typical)Extensión del eje del motor de acero AISI 1045 (típico)
101
103
383
178
126
198
199
370408
513 108
371
100
Back wearing ring on 2½ x 3 – 7 onlyAnillo de desgaste posterior en el21⁄2 x 3 – 7 únicamente.
1001
1
Item No. Description Materials, Materiales No. Ítem Descripción All Iron Bronze Fitted All Bronze Todo hierro Accesorios de bronce Todo bronce 100 Casing, Carcasa 1001 101 Impeller, Impulsor 1101
1101
103 Casing wear ring, 1618 1618 Anillo de desgaste de la carcasa 108 Adapter, Adaptador 1001 1001 184 Seal housing, Cubierta del sello One piece with adapter, Una pieza con adaptador 1101 126 Shaft sleeve, Camisa del eje 178 Impeller key, Chaveta del impulsor 198 Impeller bolt, Perno del impulsor 199 Impeller washer, Arandela del impulsor 370 Hex head cap screw (adapter to case), Tornillo de cabeza hexagonal (del adaptador a la cubierta) Steel SAE 1200 Grade 5 371 Hex head cap screw (adapter to motor), Tornillo de Acero SAE 1200 grado 5 cabeza hexagonal (del adaptador al motor) 383 Mechanical seal, Sello mecánico See seal chart on page 39, Ver tabla del sello página 39 408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de 1⁄4 de pulgada ó 3⁄8 de pulgada Steel, Acero Bronze, Bronce 513 O-ring, Anillo en O BUNA-N, BUNA-N Material Code, Código de material Engineering Standard, Norma de ingeniería 1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 1618 Bizmuth brass, Latón al bismuto
AISI Type 300 series stainless steelAcero inoxidable serie AISI tipo 300
Packed Box Arrangement, Caja prensaestopas Item No., No. Ítem Description, Descripción Materials, Materiales 105 Lantern ring, Aro de linterna TeflonTM
106 Packing, 5 rings; Empaquetadura, 5 aros Teflon Impregnated, Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve, Camisa del eje 353 Gland stud, Perno del casquillo 355 Gland nut, Tuerca del casquillo
105 106 107
353
126
355
Packed Box ArrangementCaja prensaestopas
AISI Type 300 Series Stainless SteelAcero inoxidable serie AISI tipo 300
AG-FLO Sizes, Tamaños de AG-FLO��BZ – 1 x �-��BZ – 1 x �-�
�FE/BZ – 1½ x �-� (H)�FE/BZ – 1½ x �-��FE/BZ – �½ x �-��FE/BZ – � x �-�
�1FE/BZ – � x �-���FE/BZ – �½ x �½-�
��FE/BZ – � x �-���FE/BZ – � x �-���FE/BZ – � x �-�
�1GOULDS PUMPSAg./Irrigation
101
178
198
199
126
103
383
408
370 371
100 513 108
ANSI 1045 steel motorshaft extension (typical)
ANSI 1045 Extensión del ejedel motor de acero (típica)
Close-Coupled Materials of ConstructionMateriales de construcción del acoplamiento corto
NOTE:Seal housing wear ring (item number 203) not shown. See repair parts page for detail. (Required for all models except 3 x 4 – 10.)
Material Code Engineering Standard Código de material Norma de ingeniería 1003 Cast iron ASTM A48 CL30 Hierro fundido ASTM A48 CL20 1618 Bismuth Bronze – Lead Free, Bismuth Bronze – Lead Free 1001 Cast iron ASTM A48 CL20 Hierro fundido ASTM A48 CL20 1101 ASTM B584, Modified C87500 – Lead Free ASTM B584, modified C87500 – Lead Free Packed Box Arrangement, Caja prensaestopas Item No. Description Materials No. Ítem Descripción Materiales 105 Lantern ring TeflonTM
Aro de linterna 106 Packing, 5 rings Teflon Impregnated Empaquetadura, 5 aros Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve Camisa del eje 353 Gland stud AISI Type 300 Series Stainless Steel Perno del casquillo Acero inoxidable serie AISI tipo 300 355 Gland nut Tuerca del casquillo
Item No. Description Materials, Materiales No. Descripción All Iron Bronze Fitted Ítem Todo Accesorios hierro de bronce 100 Casing, Carcasa 1003
101 Impeller, Impulsor 1101
103 Casing wear ring, Anillo de desgaste de 1618 la carcasa
108 Adapter/seal housing, Adaptador/ 1001 Cubierta del sello
126 Shaft sleeve, Camisa del eje
178 Impeller key, Chaveta del impulsor
198 Impeller bolt, Tornillo del impulsor
199 Impeller washer, Arandela del impulsor
370 Hex head cap screw (adapter to case), Tornillo de cabeza hexagonal (del adaptador a la cubierta) Steel Zinc Platted Grade 5 371 Hex head cap screw (adapter to motor), Acero SAE 1200 grado 5 Tornillo de cabeza hexagonal (del adaptador al motor) 383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello
408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de Zinc Platted Steel 1⁄4 de pulgada ó 3⁄8 de pulgada Zinc Platted Steel
513 O-ring, Anillo en O BUNA-N – Standard, EPR – Optional Viton – Optional
1001
AISI Type 300 Series SSAcero inoxidable serie
AISI tipo 300
NOTA: El anillo de desgaste del compartimiento de sello (ítem número 203) no se muestra. Consulte la página de piezas de repuesto para mayor detalle. (Se requiere para todos los modelos con excepción del 3 x 4 – 10).
105 106 107
353
126
355
Packed Box ArrangementCaja prensaestopas
108
AG-FLO Sizes, Tamaños de AG-FLO�FE – �½ x �-�
1�FE/BZ – � x �-�10FE/BZ – � x �-�
�FE/BZ – 1½ x �-1011FE/BZ – �½ x �-101�FE/BZ – � x �-10�1BZ – �½ x �-101�BZ – � x �-10
1�FE/BZ – �½ x �-1�1�FE/BZ – � x �-1�1�FE/BZ – � x �-1�
AG-FLO Sizes, Tamaños de AG-FLO1�BZ – � x �-1�
1�BZ – � x 10-1��0BZ – � x �-1�
��GOULDS PUMPSAg./Irrigation
Power Frame Materials of ConstructionMateriales de construcción del cuadro de fuerza
NOTE:Above shows typical AI or BF construction. For separate seal housing adapter, all bronze construction, see repair parts.
Pumps will be shipped with top-vertical discharge position as standard. For other orientations, remove casing bolts – rotate discharge to desired position – replace and tighten bolts to 25 ft./lbs. Note that discharge may extend below motor mounting surface in bottom-horizontal position; adequate clearance must be provided.NOTA:Esta información corresponde a las construccio-nes típicas AI y BF. Para el adaptador separado del compartimiento de sellos y construcción en todo bronce, consulte las partes de repuesto.
Las bombas salen de la fábrica con la descarga orientada en posición vertical superior de manera estándar. Para modificar la orientación, retirar los pernos de la carcasa, hacer girar la descarga hasta la posición deseada y volver a colocar los pernos, ajustándolos a una torsión de 25 pies/libras. Se ha de notar que la descarga se puede extender por debajo de la superficie de montaje del motor en la posición horizontal inferior; por lo tanto, debe proveerse suficiente espacio.
Item No. Description Materials, Materiales No. Ítem Descripción All Iron Bronze Fitted All Bronze Todo hierro Accesorios de bronce Todo bronce 100 Casing, Carcasa 1001 101 Impeller, Impulsor 1101 103 Casing wear ring, Anillo de desgaste de la carcasa 108 Adapter, Adaptador 1001 1001 184 Seal housing, Cubierta del sello One piece with adapter, Una pieza con adaptador 1101 112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero 122 Shaft, Eje Carbon steel, Acero al carbono 123 V-ring (Deflector), Anillo en V (Deflector) BUNA-N 126 Shaft sleeve, Camisa del eje AISI Type 303 SS, Acero inoxidable AISI tipo 303 134 Bearing cover, Cubierta del cojinete 1001 168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero 178 Impeller key, Chaveta del impulsor 198 Impeller screw, Tornillo del impulsor 199 Impeller washer, Arandela del impulsor 228 Bearing frame, Marco de cojinete 1001 333A Lip seal, Sello con reborde 370 Hex head cap screw (adapter to case), Tornillo de cabeza hexagonal (del adaptador a la cubierta) 370B Hex head cap screw (adapter to bearing frame),Tornillo de cabeza hexagonal (del adaptador al marco de cojinetes) Steel SAE 1200 Grade 5 370C Hex head cap screw (bearing cover to frame),Tornillo de Acero SAE 1200 grado 5 cabeza hexagonal (de la cubierta de cojinetes al marco) 382 Retaining ring, Anillo de retención 383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello 408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de 1⁄4 de pulgada ó 3⁄8 de pulgada Steel, Acero Bronze, Bronce 513 O-ring, Anillo en O BUNA-N, BUNA-N Material Code, Código de material Engineering Standard, Norma de ingeniería 1101 Cast iron ASTM A48 CL20, Hierro fundido ASTM A48 CL20 1101 Silicon bronze ASTM B584, C87500, Siliciuro de bronce ASTM B584, C87500 1618 Bizmuth brass, Latón al bismuto
AISI Type 303 Series SSAcero inoxidable serie AISI tipo 300
100
178
198
101
199
103
126
383
408 370 123
382
333A
134
112122228168108513 370C
370B
Packed Box Arrangement, Caja prensaestopas Item No., No. Ítem Description, Descripción Materials, Materiales 105 Lantern ring, Aro de linterna TeflonTM
106 Packing, 5 rings; Empaquetadura, 5 aros Teflon Impregnated, Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve, Camisa del eje 353 Gland stud, Perno del casquillo 355 Gland nut, Tuerca del casquillo
1618 1618
1101
1001
AISI Type 300 Series Stainless SteelAcero inoxidable serie AISI tipo 300
105 106 107
353
126
355
Packed Box ArrangementCaja prensaestopas
AG-FLO Sizes, Tamaños de AG-FLO��BZ – 1 x �-��BZ – 1 x �-�
�FE/BZ – 1½ x �-� (H)�FE/BZ – 1½ x �-��FE/BZ – �½ x �-��FE/BZ – � x �-�
�1FE/BZ – � x �-���FE/BZ – �½ x �½-�
��FE/BZ – � x �-���FE/BZ – � x �-���FE/BZ – � x �-�
��GOULDS PUMPSAg./Irrigation
Power Frame Materials of ConstructionMateriales de construcción del cuadro de fuerza
Item No. Description Materials, Materiales No. Descripción All Iron Bronze Fitted Ítem Todo Accesorios hierro de bronce 100 Casing, Carcasa 1003
101 Impeller, Impulsor 1101
103 Casing wear ring, Anillo de desgaste de 1618 la carcasa
108 Adapter/seal housing, Adaptador/ 1001 Cubierta del sello
126 Shaft sleeve, Camisa del eje
178 Impeller key, Chaveta del impulsor
198 Impeller bolt, Tornillo del impulsor
199 Impeller washer, Arandela del impulsor
370 Hex head cap screw (adapter to case),Tornillo de cabeza hexagonal (del adaptador a la cubierta) Steel Zinc Platted Grade 5 370B Hex head cap screw (adapter to bearing frame), Acero Zinc Platted grado 5 Tornillo de cabeza hexagonal (del adaptador al motor) 383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello
408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de Zinc PlattedSteel, 1⁄4 de pulgada ó 3⁄8 de pulgada Zinc Platted Acero
513 O-ring, Anillo en O BUNA-N – Standard, Standard EPR – Optional, Optional Viton – Optional, Optional
Power End Components, Componentes del extremo de fuerza
228 Bearing frame, Marco de cojinete
134 Bearing cover, Cubierta del cojinete
100
101
178
198
199
103
126
383
408 370 123 370B 193 193
382
333A
134
370C112122228168108513
Item No. Description Materials, Materiales No. Descripción All Iron Bronze Fitted Ítem Todo Accesorios hierro de bronce 122 Pump shaft, Eje de la bomba Steel, Acero
168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero
112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero
382 Retaining ring, bearing, Anillo de retención, cojinete
370C Hex head cap screw (bearing frame to cover), Tornillo de cabeza hexagonal (de la cubierta de cojinetes al marco)
333A Lip seal, Sello con reborde BUNA-N
193 Grease fitting, Accesorio grasa Steel, Acero
123 V-ring deflector, Anillo en V (Deflector) BUNA-N
Packed Box Arrangement, Caja prensaestopas Item No. Description Materials No. Ítem Descripción Materiales 105 Lantern ring TeflonTM
Aro de linterna 106 Packing, 5 rings Teflon Impregnated Empaquetadura, 5 aros Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve Camisa del eje 353 Gland stud AISI Type 300 Series Stainless Steel Perno del casquillo Acero inoxidable serie AISI tipo 300 355 Gland nut Tuerca del casquillo Material Code Engineering Standard Código de material Norma de ingeniería 1001 Cast iron ASTM A48 CL20 Hierro fundido ASTM A48 CL20 Sil-Brass ASTM B584, Modified C87500 – 1102 Lead Free Sil-Brass ASTM B584, Modified C87500 – Lead Free 1003 Cast Iron ASTM A48 CL30 Cast Iron ASTM A48 CL30 1618 Bismuth Bronze – Lead Free Bismuth Bronze – Lead Free
1001
AISI Type 300 Series SSAcero inoxidable serie AISI
tipo 300
105 106 107
353
126
355
Packed Box ArrangementCaja prensaestopas
112
L-Group ArrangementArreglo de grupo en L
Cast iron ASTM A48 CL20Hierro fundido ASTM A48 CL20
Steel Zinc PlattedGrade 5,
Acero Zinc Plattedgrado 5
108
AG-FLO Sizes, Tamaños de AG-FLO�FE – �½ x �-�
1�FE/BZ – � x �-�10FE/BZ – � x �-�
�FE/BZ – 1½ x �-1011FE/BZ – �½ x �-101�FE/BZ – � x �-10�1BZ – �½ x �-10
1�BZ – � x �-101�FE/BZ – �½ x �-1�1�FE/BZ – � x �-1�1�FE/BZ – � x �-1�
AG-FLO Sizes, Tamaños de AG-FLO1�BZ – � x �-1�1�BZ – � x 10-1��0BZ – � x �-1�
��GOULDS PUMPSAg./Irrigation
SAE Drive Materials of ConstructionMateriales de construcción del mando SAE
Item No. Description Materials, Materiales
No. Descripción All Iron Bronze Fitted Ítem Todo Accesorios hierro de bronce
100 Casing, Carcasa 1003
101 Impeller, Impulsor 1101
103 Casing wear ring, Anillo de desgaste de 1618 la carcasa
108 Adapter/seal housing, Adaptador/ 1001 Cubierta del sello
126 Shaft sleeve, Camisa del eje
178 Impeller key, Chaveta del impulsor
198 Impeller nut, Tornillo del impulsor
370 Hex head cap screw (adapter to case),Tornillo de cabeza hexagonal (del adaptador a la cubierta) Steel Zinc Platted Grade 5 370B Hex head cap screw (adapter to bearing frame), Acero Zinc Platted grado 5 Tornillo de cabeza hexagonal (del adaptador al motor) 383 Mechanical seal, Sello mecánico See seal chart, Ver tabla del sello 408 Pipe plug 1⁄4" or 3⁄8", Tapón de tubos de Zinc Platted Steel, 1⁄4 de pulgada ó 3⁄8 de pulgada Zinc Platted Acero
513 O-ring, Anillo en O BUNA-N – Standard, Standard EPR – Optional, Optional Viton – Optional, Optional
Power End Components, Componentes del extremo de fuerza 228 Bearing frame, Marco de cojinete 1003 134 Bearing cover, Cubierta del cojinete 1001 340 Adapter/Engine, Adaptador/Motor 1003 371C Hex head cap screw (adapter to bearing frame) Steel SAE 1200 grade 5 501N Cover/adapter, Cubierta/Adaptador Galvinized steel 327C Cap screw (cover to adapter) Steel SAE 1200 grade 5
Item No. Description Materials, Materiales
No. Descripción All Iron Bronze Fitted Ítem Todo Accesorios hierro de bronce
122 Pump shaft, Eje de la bomba AISI 4140
168 Ball bearing (inboard), Cojinete de bolas (interior) Steel, Acero
112 Ball bearing (outboard), Cojinete de bolas (exterior) Steel, Acero
382 Retaining ring, bearing, Anillo de retención, cojinete
370C Hex head cap screw (bearing frame to cover), Tornillo de cabeza hexagonal (de la cubierta de cojinetes al marco)
333A Lip seal, Sello con reborde BUNA-N
193 Grease fitting, Accesorio grasa Steel, Acero
123 V-ring deflector, Anillo en V (Deflector) BUNA-N
Packed Box Arrangement, Caja prensaestopas Item No. Description Materials No. Ítem Descripción Materiales 105 Lantern ring TeflonTM
Aro de linterna 106 Packing, 5 rings Teflon Impregnated Empaquetadura, 5 aros Impregnado de Teflon 107 Gland, Casquillo AISI 316SS 126 Shaft sleeve Camisa del eje 353 Gland stud AISI Type 300 Series Stainless Steel Perno del casquillo Acero inoxidable serie AISI tipo 300 355 Gland nut Tuerca del casquillo Material Code Engineering Standard Código de material Norma de ingeniería 1001 Cast iron ASTM A48 CL20 Hierro fundido ASTM A48 CL20 1003 Cast iron ASTM A48 CL30 Hierro fundido ASTM A48 CL30 Sil-Brass ASTM B584, Modified C87500 – 1101 Lead Free Sil-Brass ASTM B584, Modified C87500 – Lead Free 1618 Bismuth Bronze – Lead Free, Bismuth Bronze – Lead Free
1001
AISI Type 300 Series SSAcero inoxidable serie AISI
tipo 300
105 106 107
353
126
355
Packed Box ArrangementCaja prensaestopas
100
101
178
198
198
103
122
112
408370
108
370B
168 193134 333A
370C
371C 193228
165126
513 382
501N327C
340
123
333A
Steel SAE 1200Grade 5,
Acero SAE 1200grado 5
108
AG-FLO Sizes, Tamaños de AG-FLOGroup 1, Grupo 1�FE/BZ – �½ x �-�1�FE/BZ – � x �-�10FE/BZ – � x �-�
�FE/BZ – 1½ x �-1011FE/BZ – �½ x �-101�FE/BZ – � x �-10
�1BZ – �½ x �-�1�BZ – � x �-10
1�FE/BZ – �½ x �-1�1�FE/BZ – � x �-1�1�FE/BZ – � x �-1�Group 2, Grupo 21�BZ – � x �-1�1�BZ – � x 10-1��0BZ – � x �-1�
Keyed Shaft Shown(Spline Shaft Optional)
��GOULDS PUMPSAg./Irrigation
E1⁄4" NPT
CREFWYDISCHARGE,DESCARGA
SUCTION,SUCCIÓN
P.MAX
F FB H – 4 HOLES,
H – 4 AGUJEROS
LEA
Z RABMAX.
A B CREF D E F G H
143JM 6½ 5¼ 6 11¼ 3½ 2¾ 2 1⁄8
11⁄32 65⁄8 145JM 2½ 182JM
8½ 57⁄8 6½ 15 4½ 3¾ 2¼ 3⁄16 13⁄32 77⁄8
184JM 2¾ 213TCZ 10½ 73⁄8 8 18½ 5¼ 4¼ 2¾ ¼ 13⁄32 95⁄8
P. Max.,P. Máx.
AB Max.,AB Máx.
Motor Frame,Armazón del
Motor
HP @ 3500 RPM HP @ 1750 RPM 1 Phase, Monofásicos 3 Phase, Trifásicos 1 Phase, Monofásicos 3 Phase, Trifásicos ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143JM ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½, ¾, 1 ½, ¾, 1 41 145JM 2 2 2,3 2,3 1 1 1½, 2 1½, 2 57 182JM 3 3 5 3 3 – 3 3 77 184JM 5 3, 5 7½ 5, 7½ 3 – 5 5 97 213TCZ – – 10 10 – – – – 133
Motor Frame,Armazón del
Motor
2 x 2 – 5 2 2 315⁄16 215⁄16 15⁄8 41⁄8 5 3 35⁄16 26 10 105⁄8
2½ x 2½ – 5 2½ 2½ 4¾ 3¾ 33⁄8 4¼ 6 3½ 31 101⁄8 10¾
3 x 3 – 5 3 3 55⁄16 45⁄16 23⁄16 4½ 3½ 37⁄8 37 107⁄8 11½
DCMax.,
DCMáx.
NOTES:1. Pumps will be shipped with top
vertical discharge as standard. For other orientations, remove casing bolts, rotate to desired position, replace and tighten bolts to 37 lb. – ft.
2. Dimensions are in inches.
3. Motor dimensions may vary with motor manufacturer.
4. Not to be used for construction purposes.
NOTAS:1. Las bombas se transportarán
con la descarga vertical superior como estándar. Para otras ori-entaciones, retirar los tornillos de la carcasa, rotar a la posición deseada, reemplazar y apretar los tornillos 37 libras – pies.
2. Las dimensiones son en pulgadas.
3. Las dimensiones del motor pueden que varíen con los fabricantes.
4. No debe usarse para propósitos de construcción.
G
Suction, Discharge, Succión Descarga
Pump Size,Tamaño de la
Bomba
Wt.(lbs.),Peso
(libras)
Dimensions Determined by Motor, Dimensiones Determinadas por el Motor
Horsepowers, FuerzasWt.
(lbs.),Peso
(libras)
Close Coupled Dimensions Determined by Pump, Dimensiones del Acople Cerrado Determinadas por la Bomba
Dimension “L”Motor Frame Size,Tamaño del bastidor
del motor de dimensión “L”
DD R W X Y Z
140 180
DDDCMAX.
D
X
Close-Coulpled Dimensions and Weights Pesos y dimensiones del acoplamiento corto
��GOULDS PUMPSAg./Irrigation
A B C D E F G H
143JM 6½ 5¼ 6 11¼ 3½ 2¾ 2 1⁄8
11⁄32 65⁄8 145JM 2½ 182JM
8½ 57⁄8 6½ 15 4½ 3¾ 2¼ 3⁄16 13⁄32 77⁄8
184JM 2¾ 213JM
18½ 2¾ 213TCZ 10½ 73⁄8 8 5¼ 4¼ ¼ 13⁄32 95⁄8 215JM 20 3½
P. Max.,P. Máx.
AB Max.,AB Máx.
Motor Frame,Armazón del
Motor
HP @ 3500 RPM HP @ 1750 RPM 1 Phase, Monofásicos 3 Phase, Trifásicos 1 Phase, Monofásicos 3 Phase, Trifásicos ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143JM ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½,¾, 1 ½, ¾, 1 41 145JM 2 2 2,3 2,3 1 1 1½, 2 1½, 2 57 182JM 3 3 5 3 3 – 3 3 77 184JM 5 3, 5 71⁄2 5, 7½ 3 – 5 5 97 213JM 7½ – 7½, 10 7½ – – – – 133 213TCZ – 7½ – 7½ – – – – 133 215JM 10 7½, 10 7½, 10, 15 7½, 10, 15 – – – – 154
Motor Frame,Armazón del
Motor
4 x 4 – 5 4 6½ 5¼ 4½ 4¼
7 4 4½ 110
113⁄8 12 127⁄8 5 x 5 – 6 5 8 6¼ 5 8 5½ 125
* ANSI Class 125 flanges, Bridas ANSI Clase 125
DCMax.,
DCMáx.
NOTES:1. Pumps will be shipped with top
vertical discharge as standard. For other orientations, remove casing bolts, rotate to desired position, replace and tighten bolts to 37 lb. – ft.
2. Dimensions are in inches.
3. Motor dimensions may vary with motor manufacturer.
4. Not to be used for construction purposes.
NOTAS:1. Las bombas se transportarán
con la descarga vertical superior como estándar. Para otras ori-entaciones, retirar los tornillos de la carcasa, rotar a la posición deseada, reemplazar y apretar los tornillos a 37 libras – pies.
2. Las dimensiones son en pulgadas.
3. Las dimensiones del motor pueden que varíen con los fabricantes.
4. No debe usarse para propósitos de construcción.
Suction*, Discharge*, Succión Descarga
Pump Size,Tamaño de la
Bomba
Wt.(lbs.),Peso
(libras)
Dimensions Determined by Motor, Dimensiones Determinadas por el Motor
Horsepowers, FuerzasWt.
(lbs.),Peso
(libras)
Close Coupled Dimensions Determined by Pump, Dimensiones del Acople Cerrado Determinadas por la Bomba
DD R W X Y Z
140 180 210
H – 4 HOLES4 ORIFICIOS
G
E EA
Z
FF¼ NPT DRAINDRENAJE NPT
L
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
YR
C
B
D
X
DCMAX.
DD
ABMAX. W
P MAX.
Dimension “L”Motor Frame Size,Tamaño del bastidor
del motor de dimensión “L”
Close-Coupled Dimensions and Weights Pesos y dimensiones del acoplamiento corto
��GOULDS PUMPSAg./Irrigation
CP DC Motor Frame Size, Bastidor Pump Suction Discharge
Max. Max. DD R W X Y Z 140 180 210 250
Bomba Succión Descarga
L
1 x 2 – 7 31⁄2 41⁄8 51⁄2 3 4 52 — 1 x 2 – 8 41⁄4 4 315⁄16 53⁄4 33⁄16 41⁄4 52 — — 11⁄2 x 2 – 6 233⁄4 31⁄2 41⁄2 31⁄2 34 — — 11⁄2 x 2 – 8 271⁄8 53⁄8 45⁄8 41⁄4 5 41⁄4 54 113⁄8 115⁄8 21⁄2 x 3 – 7 3 21⁄2 255⁄8 51⁄8 41⁄2 113⁄16 3 4 49 101⁄8 103⁄4 113⁄4 —
3 x 4 – 7 4* 3* 251⁄4 53⁄4 51⁄8 33⁄4 43⁄8 21⁄2 41⁄2 82 93⁄4 103⁄8 113⁄8 —
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90º increments. Tighten casing bolts to 25 ft./lbs. torque.
NOTA:Todas las bombas se embarcan con la descarga en posición vertical. Esta posición puede rotarse en incrementos de 90°. Ajustar los pernos de la carcasa a una torsión de 25 pies/libras.
11⁄161 272
11⁄2 11⁄4
6
10
93⁄4
103⁄4
101⁄225⁄8
—
ABMAX. Z R
X
DG
E EA
1⁄4" NPT
DCMAX
DD
Y W
L F FB
CPMAX.
PMAX.
H - 4 HOLES4 ORIFICIOS
Motor Frame 3500 RPM 1750 RPM Bastidor 1 Phase 3 Phase 1 Phase 3 Phase del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143 — 3⁄4,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 — 1⁄2,3⁄4 1⁄2,3⁄4,1 1⁄2,3⁄4,1 145 — 2 2,3 2,3 — 1,11⁄2 11⁄2,2 11⁄2,2 182 3 3 5 3 3 2,3 3 3 184 5 3,5 71⁄2 5 — — 5 5 213 71⁄2 — 10 71⁄2 5 — 71⁄2 71⁄2 215 10 — 15 10,15 — — — — 254TCZ — — 20 — — — — — 256TCZ — — 25 20,25 — — — —
All dimensions in inches and weights in lbs. Do not use for construction purposes.Todas las dimensiones están en pulgadas, el peso en libras. No utilizar para fines de construcción.
Motor Frames and Horsepower Bastidores del motor y potencia en HP
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor)
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
Frame Size JM AB P Weight (lbs.) Tamaño del A B D E F G H (Max.) bastidor JM
(Max.)
Pesos (libras)
143 2 41
145 61⁄2 51⁄4 6 31⁄2 23⁄4 21⁄2
1⁄8 11⁄32 65⁄8
57 182 21⁄4 77 184
81⁄2 57⁄8 61⁄2 41⁄2 33⁄4 23⁄4 3⁄16 13⁄32 77⁄8 97
213 23⁄4 122 215
91⁄2 73⁄8 8 51⁄4 41⁄4 31⁄2
7⁄32 13⁄32 95⁄8 155 254 TCZ 91⁄2 41⁄8 265 256 TCZ
111⁄4 9 113⁄4
61⁄4 5 5
1⁄4 17⁄32 111⁄2 320
Mechanical SealSello mecánico
Wt. (lbs.)Pesos
(libras)
Motor Dimensions and Weights (may vary with manufacturer)* Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
Close-Coupled Dimensions and WeightsPesos y dimensiones del acoplamiento corto
��GOULDS PUMPSAg./Irrigation
Motor Frames and HorsepowerBastidores del motor y potencia en HP
Motor Dimensions and Weights (may vary with manufacturer)*Pesos y dimensiones del motor (pueden variar de acuerdo al fabricante)*
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimension “L” esta determinada por la bomba y el motor)
Close-Coupled Dimensions and Weights Mechanical SealPesos y dimensiones del acoplamiento corto Sello mecánico
NOTE:1. All pumps shipped in vertical discharge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque.,
1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for construction purposes.
4 H-HOLES4 ORIFICIOS
D
G E EA
Z
R
X
BF F
DRAIN PLUGTAPÓN DE DRENAJE
P MAX.
ABAPPROX. W
APPROX. MAX.APROX. MÁX.
CP MAX.
L
DISCHARGE/DESCARGA
SUCTIONSUCCIÓN
Motor Frame AB P* Weight (lbs.) Bastidor A (Max.) B D E F G H (Max.) Pesos (libras) del motor
143JM 41 145JM
61⁄2 51⁄4 6 31⁄2 23⁄4 2
1⁄8 5⁄16 65⁄8 57 182JM 21⁄4 77 184JM
81⁄2 57⁄8 61⁄2 41⁄2 33⁄4 23⁄4 3⁄16 3⁄8 77⁄8 97
213JM 23⁄4 122 215JM 31⁄2
1⁄4 1⁄2 95⁄8 155 213TCZ
91⁄2 73⁄8 8 51⁄4 41⁄4 23⁄4 122 215TCZ 31⁄2
3⁄16 3⁄8 95⁄8 155 254JM 41⁄8 265 256JM
111⁄4 9
91⁄2
61⁄4 5 5
1⁄4 1⁄2 111⁄2 320 284JM 43⁄4 419 286JM
121⁄4 121⁄4 103⁄4
7 51⁄2 51⁄2 1⁄4 1⁄2 131⁄4 422
324JM 51⁄4 562 326JM
131⁄4 131⁄4 12
8 61⁄4 6
5⁄16 5⁄8 151⁄8 588 364TCZ 55⁄8 775 365TCZ
171⁄2 151⁄8 141⁄2
9 7 61⁄8
1 5⁄8 183⁄8 1005
L Motor Frame, Bastidor del motor
140 180 210 250/280 320 360
107⁄8 111⁄2 121⁄2 123⁄4 – – 113⁄8 12 13 131⁄4 – – 105⁄8 111⁄4 121⁄4 121⁄2 13 135⁄8
– – 121⁄2 123⁄4 – – 113⁄16 1113⁄16 1213⁄16 131⁄16 135⁄8 – 11 115⁄8 125⁄8 127⁄8 – – – – 121⁄2 123⁄4 – – 113⁄8 12 13 131⁄4 133⁄4 143⁄8 – – 131⁄8 133⁄8 – – – – 121⁄2 123⁄4 131⁄4 –
NPT Weight Pump Suction Discharge CP DC DD R Drain W X Y Z (lbs) Bomba Succión Descarga Max. Max. Drenaje Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 301⁄4 63⁄4 57⁄8 11⁄4 5 3 51⁄2 93 21⁄2 x 3 – 8 3* 21⁄2* 303⁄4 61⁄4 51⁄4 113⁄16
11⁄4 51⁄8 6
33⁄8 5 78 21⁄2 x 3 – 9 331⁄2 71⁄8 6 71⁄2 23⁄4 51⁄2 85 21⁄2 x 3 – 10 3 21⁄2 31⁄2 3⁄8 5
21⁄2 x 3 – 13 301⁄4 87⁄8 75⁄8 9 3 71⁄2 139 3 x 4 – 8 309⁄16 61⁄4 53⁄8
1⁄4 55⁄16 7 55⁄8 82 3 x 4 – 10 4 3 303⁄8 73⁄8 61⁄2 33⁄4 51⁄8 71⁄2 51⁄2 99 3 x 4 – 13 331⁄4 91⁄2 81⁄8 5 9
3 71⁄2 155
4 x 5 – 8 5 341⁄4 67⁄8 53⁄4 3⁄8 51⁄2 8 5 99
4 x 6 – 10 4 307⁄8 85⁄8 71⁄2 41⁄2 51⁄2 81⁄2 31⁄8 7 135 4 x 6 – 13
6 32 93⁄4 81⁄8 51⁄4 9 3 71⁄2 171
6 x 8 – 13 8 x 10 – 13 4 x 6 – 16*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.Dimensions in inches, weights in lbs. Do not use for construction purposes.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.
NOTA: 1. Todas las bombas se embarcan con la descarga en posición vertical. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posición deseada y ajuste los 16 pernos de 3/8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construcción.
Frame Size JM ODP TEFC RPM Tamaño del bastidor JM 143 JM 1 1 145 JM 11⁄2, 2 11⁄2, 2 182 JM 3 3 184 JM 5 5 213 JM 71⁄2 71⁄2 215 JM, 215 TCZ 10 10 254 JM 15 15 256 JM 20 20 284 JM 25 25 286 JM 30 30 324 JM 40 40 326 JM 50 50 143 JM 11⁄2 11⁄2 145 JM 2, 3 2 182 JM 5 3 184 JM 71⁄2 5 213 JM 10 71⁄2 215 JM 15 10 215 TCZ 15 – 254 JM 20 15 3500 256 JM 25 20 284 JM 30 25 286 JM 40 30 324 JM 50 40 326 JM 60 50 364 TCZ 75 60 365 TCZ – 75
1750
Y
See Packed Box Dimension Page. (pumps utilize JP motors), Ver la página de dimensiones de la caja empacada. (JP motors)
��GOULDS PUMPSAg./Irrigation
CP DC Motor Frame Size, Bastidor Pump Suction Discharge
Max. Max. DD R W X Y Z 140 180 210 250
Bomba Succión Descarga
L
1 x 2 – 7 31⁄2 73⁄16 51⁄2 3 4 52 — — 1 x 2 – 8 41⁄4 4 7 53⁄4 33⁄16 41⁄4 52 — — 11⁄2 x 2 – 6 263⁄4 31⁄2 41⁄2 31⁄2 34 — — 11⁄2 x 2 – 8 301⁄8 53⁄8 45⁄8 75⁄16 5 41⁄4 54 147⁄16 115⁄16
21⁄2 x 3 – 7 3 21⁄2 285⁄8 51⁄8 41⁄2 113⁄16 3 4 49 133⁄16 1313⁄16 1413⁄16 —
3 x 4 – 7 4* 3* 281⁄4 53⁄4 51⁄8 33⁄4 77⁄16 21⁄2 41⁄2 82 1213⁄16 137⁄16 147⁄16 —
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90º increments. Tighten casing bolts to 25 ft./lbs. torque.
NOTA:Todas las bombas se embarcan con la descarga en posición vertical. Esta posición puede rotarse en incrementos de 90°. Ajustar los pernos de la carcasa a una torsión de 25 pies/libras.
11⁄1612
11⁄2 11⁄4
6
25⁄8
ABMAX. Z R
X
DG
E EA
1⁄4" NPT
DCMAX
DD
Y W
L F FB
CPMAX.
PMAX.
H - 4 HOLES4 ORIFICIOS
Motor Frame 3500 RPM 1750 RPM Bastidor 1 Phase 3 Phase 1 Phase 3 Phase del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143 JP — — — — — — 1 — 145 JP — — 3 2,3 — — 11⁄2,2 11⁄2,2 182 JP 3 — 5 — 3 — 3 3 184 JP 5 — 71⁄2 5 — — 5 5 213 TCZ 71⁄2 — 10 71⁄2 5 — — — 215 TCZ 10 — 15 10,15 — — — — 254 TCZ — — 20 — — — — — 256 TCZ — — 25 — — — — —
All dimensions in inches and weights in lbs. Do not use for construction purposes.Todas las dimensiones están en pulgadas, el peso en libras. No utilizar para fines de construcción. TCZ indicates west coast fit.
Motor Frames and Horsepower Bastidores del motor y potencia en HP
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor)
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
Frame Size JP AB P Weight (lbs.) Tamaño del A B D E F G H (Max.) bastidor JP
(Max.)
Pesos (libras)
143 2 41
145 61⁄2 51⁄4 6 31⁄2 23⁄4 21⁄2
1⁄8 11⁄32 65⁄8
57 182 21⁄4 77 184
81⁄2 57⁄8 61⁄2 41⁄2 33⁄4 23⁄4 3⁄16
13⁄32 77⁄8 88 213 TCZ 23⁄4 122 215 TCZ
91⁄2 73⁄8 8 51⁄4 41⁄4 31⁄2
7⁄32 13⁄32 95⁄8 155 254 TCZ 91⁄2 23⁄4 265 256 TCZ
111⁄4 9 113⁄4
61⁄4 5 31⁄2
1⁄4 17⁄32 111⁄2 320
TCZ indicates west coast fit.
Packed BoxCaja prensaestopas
30
1213⁄16 139⁄16
1313⁄16131⁄16
Wt. (lbs.)Pesos
(libras)
Motor Dimensions and Weights (may vary with manufacturer)* Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
Close-Coupled Dimensions and WeightsPesos y dimensiones del acoplamiento corto
�0GOULDS PUMPSAg./Irrigation
SUCTIONSUCCIÓN
NPT DRAINDRENAJE NPT
Y
H - 4 HOLES4 ORIFICIOSL
ABMAX RZ
E EA
X
G DDC
MAXDD
W
FFB
CPMAX
P MAX
JN
M
2 HOLES.62 DIA.
K
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.■ Indicates “L” Group pump (dimensions valid for packed box or mechanical seal)., ■ Indica una bomba Grupo “L” (dimensiones válidas para caja empacada o sella mecánico).
NPT Drain Wt. (lbs.) Motor Frame, Bastidor del motor Pump Suction Discharge CP DC DD J K M N R Drenaje W X Y Z Pesos L Bomba Succión Descarga Max. Max. NPT (libras) 210 250/280 320 360 400 440 11⁄2 x 2 –10 2* 11⁄2* 341⁄8 63⁄4 57⁄8 — — — — 11⁄4 77⁄8 3 51⁄2 105 163⁄8 123⁄4 — — — — 21⁄2 x 3 – 8 3* 21⁄2* 345⁄8 61⁄4 51⁄4 — — — — 113⁄16
1⁄4 8 6 33⁄8 5 90 167⁄8 131⁄4 — — — —
21⁄2 x 3 – 9 373⁄8 71⁄8 6 — — — — 71⁄2 23⁄4 51⁄2 95 161⁄8 121⁄2 157⁄8 161⁄2 — — 21⁄2 x 3 – 10 3 21⁄2 31⁄2 3⁄8 77⁄8 21⁄2 x 3 – 13 341⁄8 87⁄8 75⁄8 — — — —
9 3 71⁄2 155 163⁄8 123⁄4 — — — —
3 x 4 – 8 347⁄16 61⁄4 53⁄8 — — — — 1⁄4 83⁄16 7 55⁄8 90 1611⁄16 131⁄16 161⁄2 — — — 3 x 4 – 10 4 3 341⁄4 73⁄8 61⁄2 — — — — 33⁄4 8 71⁄2 51⁄2 110 161⁄2 127⁄8 — — — — 3 x 4 – 13 371⁄8 91⁄2 81⁄8 — — — — 77⁄8 9
3 71⁄2 170 163⁄8 123⁄4 — — — —
4 x 5 – 8 5 381⁄8 67⁄8 53⁄4 — — — — 83⁄8 8 5 110 167⁄8 131⁄4 165⁄8 171⁄4 — — 4 x 6 – 10 4 343⁄4 85⁄8 71⁄2 — — — — 41⁄2
3⁄8 83⁄8 81⁄2 31⁄8 7 145 17 133⁄8 — — — — 4 x 6 – 13 6 357⁄8 93⁄4 81⁄8 — — — — 81⁄8 9 3 71⁄2 185 163⁄8 123⁄4 161⁄8 — — —■ 4 x 6 – 16 471⁄8 123⁄4 11 115⁄16 93⁄4 8 7 85⁄8 12 4 101⁄2 390 1611⁄16 173⁄16 1711⁄16 185⁄16 191⁄4 —■ 6 x 8 – 13 8 6 457⁄8 123⁄4 101⁄2 23⁄8 71⁄2 61⁄2 51⁄2 51⁄2 83⁄8 11 3 83⁄4 290 163⁄4 171⁄4 173⁄4 183⁄8 187⁄8 193⁄4■ 8 x 10 – 13 10 8 481⁄8 143⁄4 13 23⁄8 71⁄2 61⁄2 51⁄2 63⁄4 85⁄8 123⁄4 4 10 520 171⁄8 175⁄8 181⁄8 183⁄4 191⁄4 201⁄8
Horsepower
A
B D E F G H 3500 RPM 1750 RPM
1 Phase 3 Phase 1 Phase 3 Phase ODP TEFC ODP TEFC ODP TEFC ODP TEFC 213JP 23⁄4 71⁄2 — 10 — 5 — 71⁄2 71⁄2 125
215JP 91⁄2 73⁄8 8 51⁄4 41⁄4
31⁄2 1⁄4
13⁄32 95⁄8 10 — 15 10 & 15 71⁄2 & 10 — 10 10 155
254JP 41⁄8 — — 20 — — — 15 15 255
256JP 111⁄4 9
113⁄4
61⁄4 5
5 111⁄2
— — 25 20 — — 20 20 280
284JP 43⁄4
1⁄4 17⁄32 — — 30 25 — — 25 25 410
286JP 121⁄4 121⁄4
121⁄4
7 51⁄2
51⁄2 131⁄4 — — 40 30 — — 30 30 425
324JP 51⁄4 — — 50 40 — — 40 40 560
326JP 131⁄4 131⁄4
131⁄2
8 61⁄4 6
5⁄16
151⁄8 — — 60 50 — — 50 50 590
364TCZ 55⁄8 21⁄32 — — 75 60 & 75 — — 60 60 775
365TCZ 171⁄2 143⁄8
151⁄8
9 7
61⁄8 1
183⁄8 — — — — — — 75 75 1005
404TCZ 10 8 61⁄8 201⁄8 — — — — — — 100 100 1110
405TCZ 191⁄2
171⁄2
165⁄8
67⁄8 1 13⁄16 — — — — — — 125 — 1163
444TCZ 191⁄8 11 9 71⁄4 221⁄2 — — — — — — 150 125 1600
445TCZ 211⁄2
191⁄2
81⁄4 1 — — — — — — — 150 1708
Motor Dimensions and Weights (may vary with manufacturer)*, Peso y dimensiones del motor (pueden variar de acuerdo al fabricante) *
Wt.Max.
Motor FrameBastidor
del motor
ABMax.
NOTE:1. All pumps shipped in vertical dis-charge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing
NOTA: 1. Todas las bombas se embarcan con la descarga en posición vertical. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posición deseada y ajuste los 16 pernos
PMax.
bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for constructionpurposes.
de 3/8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construcción.
PUMP CENTERLINELÕNEA CENTRAL DE LA BOMBA
ADAPTER FOOTBASE ADAPTADORAADAPTER FOOT
BASE ADAPTADORAPump Dimensions and Weights, Peso y dimensiones de la bomba
Close-Coupled Dimensions and Weights Packed BoxPesos y dimensiones del acoplamiento corto Caja prensaetopas
DISCHARGEDESCARGA
�1GOULDS PUMPSAg./Irrigation
Pump Size, Suction*, Discharge*, DC Max., Wt. (lbs.), HL Motor Frame, Tamaño de la Bomba Succión Descarga CP DC Máx. DD L R W X Y Z Peso (libras) Armazón del Motor HL 2 x 2 – 5 2 2 16¾ 315⁄16 215⁄16 9½ 15⁄8 41⁄8 5
3 35⁄16 26 9½
2½ x 2½ – 5 2½ 2½ 173⁄8 4¾ 3¾ 95⁄8 33⁄8 4¼ 6 3½ 31 95⁄8
3 x 3 – 5 3 3 175⁄8 55⁄16 45⁄16 103⁄8 23⁄16 4½ 3½ 33⁄8 37 103⁄8
* NPT connections, Conexiones NPT
HP @ 3500 RPM HP @ 1750 RPM 1 PH, Monofásicos 3 PH, Trifásicos 1 PH, Monofásicos 3 PH, Trifásicos ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143T ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½, ¾, 1 ½, ¾, 1
5¼ 133⁄8
65⁄8 45
145T 2 2 2,3 2,3 1 1 – – 14¼ 53
182T 3 – 5 3 – – – – 57⁄8
165⁄8 77⁄8
74
184T 5 3 – 5 – – – – 181⁄8 95
Motor Frame,Armazón del
Motor
HA
HE HE
X
HD
AB MAX.
R Y WDISCHARGE,DESCARGA
SUCTION,SUCCIÓN
DDDCMAX.
HL¼" NPT
HFHB
KEYWAY 1⁄8 x ¼CHAVETERO 1⁄8 x ¼
C MAX.SPACER COUPLING,ACOPLE DEL ESPACIADOR
COUPLING GUARD, GUARDA ACOPLE
3¾
PMAX.
CP
SINGLE PHASE ONLY,MONOFÁSICOS SOLA-
MENTE
3
AB Max.,
AB Máx.
C Max.,
C Máx.
P Max.,
P Máx.
Wt. (lbs.),Peso
(libras)
NOTES:1. Pumps will be shipped with top
vertical discharge as standard. For other orientations, remove casing bolts, rotate to desired position, replace and tighten bolts to 37 lb. – ft.
2. Dimensions are in inches.
3. Motor dimensions may vary with motor manufacturer.
4. Not to be used for construction purposes.
NOTAS:1. Las bombas se transportarán con
la descarga vertical superior como estándar. Para otras orientaciones, retirar los tornillos de la carcasa, rotar a la posición deseada, reemplazar y apretar los tornillos a 37 libras – pies.
2. Las dimensiones son en pulgadas.
3. Las dimensiones del motor pueden que varíen con los fabricantes.
4. No debe usarse para propósitos de construcción.
CPWY
DISCHARGE,DESCARGA
SUCTION,SUCCIÓN
X
DCMAX.
3
¼" NPT56½
1.1251.124
DIA.
H – 4 HOLES, 7⁄16 DIA.H – 4 AGUJEROS, 7⁄16 DIA.
2¾ 2¾7
Z
5¾
KEYWAY ¼ x 1⁄8,CHAVETERO ¼ x 1⁄8
R
Frame Mounted Dimensions Determined by Pump, Dimensiones del Armazón Montado Determinadas por la Bomba
Dimensions Determined by Bedplate, Dimensiones Determinadas por la Fundación
Motor Frame, HA HB HD HE HF HG HL HP
Wt. (lbs.), Motor Shim, Bearing Frame Shim, Armazón del Motor Peso (libras) Deflector del Motor Armazón de Balineras
143T 1¾ –
145T 10 28 8 3¾ 24 2¾ 103⁄8 ¾ 47
182T ¾ –
184T
Horsepowers, Fuerzas
1.1251.124
DIA.
HG
Z
¾L
DD
4 HOLES 5⁄8 DIA.4 AGUJEROS 5⁄8 DIA.
HP
½
Close-Coupled Dimensions and Weights Pesos y dimensiones del acoplamiento corto
��GOULDS PUMPSAg./Irrigation
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90º increments. Tighten casing bolts to 25 ft./lbs. torque.
Dimensions in inches, weights in lbs. Do not use for construction purposes.
NOTA:Todas las bombas se embarcan con la descarga en posición vertical. Esta posición puede rotarse en incrementos de 90°. Ajustar los pernos de la carcasa a una torsión de 25 pies/libras.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.
Pump Suction Discharge CP DC DD L R W X Y Z Wt.(lbs.) Bomba Succión Descarga Max. Pesos (libras) 1 x 2 –7 31⁄2 41⁄8 51⁄2 3 4 84 1 x 2 – 8 1 163⁄4 41⁄4 4 8 11⁄16 315⁄16 53⁄4 33⁄16 41⁄4 84 11⁄2 x 2 – 6 2 31⁄2 41⁄2 31⁄2 66 11⁄2 x 2 – 8 11⁄
2 161⁄2 53⁄8 45⁄8
73⁄4
11⁄4 41⁄4 5 25⁄8 41⁄4 86
21⁄2 x 3 – 7 3 21⁄2 167⁄8 51⁄8 41⁄2 81⁄8 113⁄16 3 4 81
3 x 4 – 7 4* 3* 161⁄2 53⁄4 51⁄8 73⁄4 33⁄4 43⁄8 6 21⁄2 41⁄2 114
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
Z R DISCHARGEDESCARGA
SUCTIONSUCCIÓN
1⁄4" NPT
X
23⁄4 L
7
51⁄4
23⁄4 56 1⁄2
3⁄4
1⁄2
4 HOLES4 ORIFICIOS
7⁄16 DIA.
KEYWAYCHAVETERO
1⁄4 x 1⁄8
Y W
3
1.1251.124 DIA.
DCMAX
DD
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor)
CP
Mechanical SealSello mecánico
Power Frame Dimensions and WeightsPesos y dimensiones del cuadro de fuerza
��GOULDS PUMPSAg./Irrigation
Z R
X
2¾L
7
2¾¾
Y W
37⁄8
CP
4 HOLES7⁄16 DIA.4 ORIFICIOS
½
5¾
56½
DCMAX
DD
¼ NPT
DISCHARGEDESCARGA
SUCTIONSUCCIÓN 1.125
1.124 DIA.
KEYWAY ¼ x 1⁄8CHAVETERO¼ x 1⁄8
HL Motor Frame Pump Size, Suction*, Discharge*,
CP DC Max.,
DD L R W X Y Z Armazón del Wt. (lbs.),
Tamaño de la Bomba Succión Descarga DC Máx. Motor HL Peso (libras) 140-180 210 4 x 4 – 5 4
177⁄8 6½ 5¼ 8¾ 4½
4¼ 7
4 4½ 10¼ 8¾ 142
5 x 5 – 6 5 8 6¼ 921⁄32 5 8 5½ 115⁄32 921⁄32 157
* ANSI Class 125 Flanges, Bridas ANSI Clase 125
HP @ 3500 RPM HP @ 1750 RPM 1 PH, Monofásicos 3 PH, Trifásicos 1 PH, Monofásicos 3 PH, Trifásicos ODP TEFC ODP TEFC ODP TEFC ODP TEFC 143T ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ¾, 1, 1½ ½, ¾ ½, ¾ ½, ¾, 1 ½, ¾, 1
5¼ 14
65⁄8 45
145T 2 2 2,3 2,3 1 1 2 2 14¼ 53 182T 3 3 5 3 2 2, 3 3 3
63⁄8 165⁄8 77⁄8
74 184T 5 3, 5 7½ 5 3 – 5 5 181⁄8 95 213T 7½ – 10 7½ 5 – 7½ 7½
8½ 20 95⁄8 116
215T 10 – 15 10, 15 – – 10 10 136
Motor Frame,Armazón del
Motor
AB Max.,
AB Máx.
C Max.,
C Máx.
P Max.,
P Máx.
Wt. (lbs.),Peso
(libras)
NOTES:1. Pumps will be shipped with top
vertical discharge as standard. For other orientations, remove casing bolts, rotate to desired position, replace and tighten bolts to 37 lb. – ft.
2. Dimensions are in inches.
3. Motor dimensions may vary with motor manufacturer.
4. Not to be used for construction purposes.
NOTAS:1. Las bombas se transportarán con
la descarga vertical superior como es-tándar. Para otras orientaciones, retirar los tornillos de la carcasa, rotar a la posición deseada, reemplazar y apretar los tornillos a 37 libras – pies.
2. Las dimensiones son en pulgadas.
3. Las dimensiones del motor pueden que varíen con los fabricantes.
4. No debe usarse para propósitos de construcción.
Frame Mounted Dimensions Determined by Pump, Dimensiones del Armazón Montado Determinadas por la Bomba
Dimensions Determined by Bedplate, Dimensiones Determinadas por la Fundación Motor Frame,
HA HB HD HE HF HG HP Wt. (lbs.), Motor Shim, Bearing Frame Shim,
Armazón del Motor Peso (libras) Deflector del Motor Armazón de Balineras 143T
1¾ – 145T
10 28 8 3¾ 24 2¾ ¾ 47 182T
¾ – 184T
213T/215T 12 31 8¼ 4¼ 29 3 1 65 – –
Horsepowers, Fuerzas
CP
KEYWAY 1⁄8 x ¼CHAVETERO 1⁄8 x ¼
1.1251.124
DIA.
3
HL HF
HB
HP
PMAX.
SINGLE PHASE ONLYMONOFÁSICO SOLAMENTE
3¾
WY
DDDCMAX.
SUCTIONSUCCIÓN
DISCHARGEDESCARGA
HG
HD
NPT DRAINDRENAJE NPTHE HE
HA
ABMAX. Z R
X
(4) HOLES5⁄8 DIA.4 ORIFICIOS
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
C MAX.
Power Frame Dimensions and Weights Pesos y dimensiones del cuadro de fuerza
2 HOLES.62 DIA.
NM
ADAPTER FOOTBASE ADAPTADORA
PUMP CENTERLINE
LÍNEA CENTRALDE LA BOMBA
��GOULDS PUMPSAg./Irrigation
Pump Suction Discharge DC NPT Drain Weight (lbs.) Bomba Succión Descarga CP (Max.) DD L J K M N R Drenaje W X Y Z Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 217⁄8 63⁄4 57⁄8 93⁄8 — — — — 11⁄4 5 3 51⁄2 155 21⁄2 x 3 – 8 3* 21⁄2* 223⁄8 61⁄4 51⁄4 97⁄8 — — — — 113⁄16
1⁄4 51⁄8
6 33⁄8 5 140
21⁄2 x 3 – 9 215⁄8 71⁄8 6 91⁄8 — — — — 71⁄2 23⁄4 51⁄2 147 21⁄2 x 3 – 10 3 21⁄2 31⁄2
3⁄8 5
21⁄2 x 3 – 13 217⁄8 87⁄8 75⁄8 93⁄8 — — — —
9 3 71⁄2 201 3 x 4 – 8 223⁄16 61⁄4 53⁄8 911⁄16 — — — —
1⁄4 55⁄16 7 55⁄8 144 3 x 4 – 10 4 3 22 73⁄8 61⁄2 91⁄2 — — — — 33⁄4 51⁄8 71⁄2 51⁄2 161 3 x 4 – 13 217⁄8 91⁄2 81⁄8 93⁄8 — — — — 5 9
3 71⁄2 217
4 x 5 – 8 5 223⁄8 67⁄8 53⁄4 97⁄8 — — — — 51⁄2 8 5 161 4 x 6 – 10 4 221⁄2 85⁄8 71⁄2 10 — — — — 41⁄2
3⁄8 51⁄2 81⁄2 31⁄8 7 200 4 x 6 – 13 6 221⁄8 93⁄4 81⁄8 95⁄8 — — — — 51⁄4 9 3 71⁄2 233 ■ 4 x 6 – 16 261⁄2 123⁄4 11 1213⁄16 29⁄16 93⁄4 8 7 85⁄8 12 4 101⁄2 430 ■ 6 x 8 – 13 8 6 251⁄4 123⁄4 101⁄2 135⁄8 33⁄4 71⁄2 61⁄2 51⁄2 51⁄2 83⁄8 11 3 83⁄4 330 ■ 8 x 10 – 13 10 8 261⁄2 143⁄4 13 14 33⁄4 71⁄2 61⁄2 51⁄2 63⁄4 85⁄8 123⁄4 4 10 515
Motor Dimensions and Weights (may vary with manufacturer)*Pesos y dimensiones del motor (pueden variar de acuerdo al fabricante)*
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.Dimensions in inches, weights in lbs. Do not use for construction purposes.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
NOTE:1. All pumps shipped in vertical discharge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for construction purposes.
NOTA: 1. Todas las bombas se embarcan con la descarga en posición vertical. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posición deseada y ajuste los 16 pernos de 3/8 de pulgada a una tor-sión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construc-ción.
Power Frame Dimensions and Weights Mechanical SealPesos y dimensiones del cuadro de fuerza Sello mecánico
Z R
X
31⁄2L
81⁄2
31⁄21
Y W
37⁄8
CP
4 HOLES9⁄16 DIA.
1⁄2
61⁄4
61⁄281⁄2
DCMAX
DD
4 ORIFICIOSDRAIN PLUG
TAPÓN DEDRENAJE
DISCHARGEDESCARGA
SUCTIONSUCCIÓN 1.625
1.624 DIA.
2 HOLES.62 DIA.
NM
K
KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
ADAPTER FOOTBASE ADAPTADORA
ADAPTER FOOTBASE ADAPTADORA
PUMP CENTERLINE
LÍNEA CENTRALDE LA BOMBA
J
��GOULDS PUMPSAg./Irrigation
NOTE:All pumps shipped in vertical discharge position. May be rotated in 90º increments. Tighten casing bolts to 25 ft./lbs. torque.
Dimensions in inches, weights in lbs. Do not use for construction purposes.
NOTA:Todas las bombas se embarcan con la descarga en posición vertical. Esta posición puede rotarse en incrementos de 90°. Ajustar los pernos de la carcasa a una torsión de 25 pies/libras.
Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.
Pump Suction Discharge DC Wt.(lbs.) CP DD L R W X Y Z Pesos Bomba Succión Descarga Max.
(libras)
1 x 2 –7 31⁄2 73⁄16 51⁄2 3 4 84 1 x 2 – 8 1 197⁄16 41⁄4 4 111⁄16 11⁄16 7 53⁄4 33⁄16 41⁄4 84 11⁄2 x 2 – 6 2 31⁄2 41⁄2 31⁄2 66 11⁄2 x 2 – 8 11⁄2 199⁄16 53⁄8 45⁄8
1013⁄16
11⁄4 75⁄16 5 25⁄8 41⁄4 86
21⁄2 x 3 – 7 3 21⁄2 1915⁄16 51⁄8 41⁄2 113⁄16 113⁄16 3 4 81
3 x 4 – 7 4* 3* 199⁄16 53⁄4 51⁄8 1013⁄16 33⁄4 77⁄16 6 21⁄2 41⁄2 114
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
Z R DISCHARGEDESCARGA
SUCTIONSUCCIÓN
1⁄4" NPT
X
23⁄4 L
7
51⁄4
23⁄4 56 1⁄2
3⁄4
1⁄2
4 HOLES4 ORIFICIOS
7⁄16 DIA.
KEYWAYCHAVETERO
1⁄4 x 1⁄8
Y W
3
1.1251.124 DIA.
DCMAX
DD
Pump Dimensions and Weights (Dimension “L” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensión “L” está determinada por la bomba y el motor)
CP
Packed BoxCaja prensaestopas
Power Frame Dimensions and WeightsPesos y dimensiones del cuadro de fuerza
��GOULDS PUMPSAg./Irrigation
Power Frame Dimensions and Weights Packed BoxPesos y dimensiones del cuadro de fuerza Caja prensaestopas
NOTE:1. All pumps shipped in vertical discharge position. For other orien-tations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for constructionpurposes.
Motor Dimensions and Weights (may vary with manufacturer)*Pesos y dimensiones del motor (pueden variar de acuerdo al fabricante)*
NOTA: 1. Todas las bombas se embarcan con la descarga en posición vertical. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posición deseada y ajuste los 16 pernos de 3/8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construc-ción.
Pump Suction Discharge DC NPT Drain Weight (lbs.) Bomba Succión Descarga CP (Max.) DD L J K M N R Drenaje W X Y Z Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 243⁄4 63⁄4 57⁄8 121⁄4 — — — — 11⁄4 77⁄8 3 51⁄2 165 21⁄2 x 3 – 8 3* 21⁄2* 251⁄4 61⁄4 51⁄4 123⁄4 — — — — 113⁄16
1⁄4 8
6 33⁄8 5 150
21⁄2 x 3 – 9 241⁄2 71⁄8 6 12 — — — — 71⁄2 23⁄4 51⁄2 160 21⁄2 x 3 – 10 3 21
2 31⁄2 3⁄8 77⁄8
21⁄2 x 3 – 13 243⁄4 87⁄8 75⁄8 121⁄4 — — — — 9 3 71⁄2 215 3 x 4 – 8 221⁄16 61⁄4 53⁄8 125⁄16 — — — —
1⁄4 83⁄16 7 55⁄8 155 3 x 4 – 10 4 3 247⁄8 73⁄8 61⁄2 123⁄8 — — — — 33⁄4 8 71⁄2 51⁄2 170 3 x 4 – 13 243⁄4 91⁄2 81⁄8 121⁄4 — — — — 77⁄8 9
3 71⁄2 230
4 x 5 – 8 5 251⁄4 67⁄8 53⁄4 123⁄4 — — — — 83⁄8 8 5 170 4 x 6 – 10 4 253⁄8 85⁄8 71⁄2 127⁄8 — — — — 41⁄2
3⁄8 83⁄8 81⁄2 31⁄8 7 210 4 x 6 – 13 6 25 93⁄4 81⁄8 121⁄2 — — — — 81⁄8 9 3 71⁄2 245 ■ 4 x 6 – 16 261⁄2 123⁄4 11 1213
16 29⁄16 93⁄4 8 7 85⁄8 12 4 101⁄2 430 ■ 6 x 8 – 13 8 6 251⁄4 123⁄4 101⁄2 135⁄8 33⁄4 71⁄2 61⁄2 51⁄2 51⁄2 83⁄8 11 3 83⁄4 330 ■ 8 x 10 – 13 10 8 261⁄2 143⁄4 13 14 33⁄4 71⁄2 61⁄2 51⁄2 63⁄4 85⁄8 123⁄4 4 10 515
Z R
X
31⁄2L
81⁄2
31⁄21
Y W
37⁄8
CP
4 HOLES9⁄16 DIA.
1⁄2
61⁄4
61⁄281⁄2
DCMAX
DD
4 ORIFICIOSDRAIN PLUGTAPÓN DEDRENAJE
DISCHARGEDESCARGA
SUCTIONSUCCIÓN 1.625
1.624 DIA.
2 HOLES.62 DIA.
NM
K
KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
ADAPTER FOOT, BASE ADAPTADORA
PUMP CENTERLINELÕNEA CENTRALDE LA BOMBA
ADAPTER FOOTBASE ADAPTADORA
J
��GOULDS PUMPSAg./Irrigation
Wt.(lbs.) Motor Frame Size, Tamaño del bastidor Pump Suction Discharge CP DC DD R W X Y Z Pesos 140 / 180 210 250 / 280 Bomba Succión Descarga Max. Max. (libras) HL 1 x 2 – 7 31⁄2 41⁄8 51⁄2 3 4 84 — — 1 x 2 – 8 41⁄4 4 11⁄16 315⁄16 53⁄4 33⁄16 41⁄4 84 — 11⁄2 x 2 – 6 31⁄2 41⁄2 31⁄2 66 91⁄4 73⁄4 — 11⁄2 x 2 – 8 53⁄8
11⁄4 41⁄4 5 25⁄8 41⁄4 86 — 21⁄2 x 3 – 7 3 21⁄2 167⁄8 51⁄8 41⁄2 113⁄16 3 4 81 95⁄8 81⁄8 43⁄8
3 x 4 – 7 4* 3* 161⁄2 53⁄4 51⁄8 33⁄4 43⁄8 21⁄2 41⁄2 114 91⁄4 73⁄4 7
Bedplate Dimensions and Weights, Pesos y dimensiones de la place de asiento Motor Frame Motor Bearing Frame Weight (lbs.) Bastidor HA HB HD HE HF HG HP* Shim Shim Cuña del Pesos del motor Cuña marco de cojinetes (libras)
143 T 145 T
13⁄4
—
182 T 10 28 8 33⁄4 24 23⁄4 3⁄4 48
184 T
3⁄4 —
213 T 215 T
12 31 81⁄4 41⁄4 29 3 1 — — 65
254 T 256 T
13 42 91⁄4 51⁄4 381⁄2 4 13⁄4
— 1 110
284 TS/T 15 44 101⁄2 53⁄4 401⁄2 31⁄2 — 13⁄4 124
* “HP” Dimension at Motor end only. * Dimensión “HP” al extremo del motor únicamente.
Z R
X
ABMAX
HE HE
HA
DD
1⁄4" NPT HF
HB
HP
4 HOLES5⁄8 DIA.
4 ORIFICIOS
P MAX
33⁄4
3
CP
YSINGLE PHASE
ONLY
DCMAX
1.1251.124
HD
HG
W
HL
C MAX
(Motor End Only)(Extremo del motor únicamente)
DIA.
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
NOTE:1. All pumps shipped in vertical discharge position. May be rotated in 90° increments. Tighten casing bolts to 25 ft./lbs. torque.
2. Dimensions in inches, weights in lbs. Do not use for construc-tion purposes.3. Motor dimensions and weights very with manufacturer.
NOTA:1. Todas las bombas se embarcan con la descarga en posición vertical. Esta posición puede rotarse en incrementos de 90°. Ajustar los pernos de la carcasa a una torsión de 25 pies/libras.2. Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.3. Las dimensiones y el peso de los motores varían de acuerdo al fabricante.
Motor Frame 3500 RPM 1750 RPM Wt. (lbs.) Bastidor 1 Phase 3 Phase 1 Phase 3 Phase AB C P Pesos del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max. (libras) 143 T 1⁄2,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 1⁄2,3⁄4 1⁄2,3⁄4 1⁄2,3⁄4,1 1⁄2,3⁄4,1 133⁄8 45 145 T 2 2 2,3 2,3 1,11⁄2 1,11⁄2 11⁄2,2 11⁄2,2 141⁄4 53 182 T 3 3 5 3 2 2,3 3 3 165⁄8 74 184 T 5 3,5 71⁄2 5 3 — 5 5 181⁄8 95 213 T 71⁄2 — 10 71⁄2 5 — 71⁄2 71⁄2 18 116 215 T 10 — 15 10,15 — — — — 191⁄8 136 254 T — — 20 — — — — — 215⁄8 266 256 T — — 25 20,25 — — — — 233⁄8 264 284 TS/T — — 30 25 — — — — 125⁄8 247⁄8 15 392
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
Motor Dimensions and Weights, Peso y dimensiones del motor
51⁄4 51⁄4
57⁄8 57⁄8
73⁄8 73⁄8
101⁄8 101⁄8
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
1 163⁄82
11⁄2
6
161⁄2
KEYWAYCHAVETERO
1⁄8 x 1⁄4
MONOFÁSICO SOLAMENTE
Mechanical SealSello mecánico
Pump Dimensions and Weights (Dimension “HL” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensión “HL” está determinada por la bomba y el motor)
Bedplate AssemblyInstalación de la placa de asiento
��GOULDS PUMPSAg./Irrigation
Pump Dimensions and WeightsPeso y dimensiones de la bomba
Channel Steel Bedplate. Clockwise rotation viewed from drive end.Placa de asiento de acero acanalado. Rotación dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
NOTE:1. All pumps shipped in vertical discharge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for constructionpurposes.
NOTA: 1. Todas las bombas se embarcan con la descarga en posición vertical. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posi-ción deseada y ajuste los 16 pernos de 3⁄8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construcción.
Motor and Bedplate Dimensions and Weights (may vary with manufacturer.)Peso y dimensiones del motor y la placa de asiento (pueden variar de acuerdo al fabricante)
184T — — 5 5 57⁄8 18 8 95 13⁄4 — 213T — — 71⁄2 71⁄2 18 116 1 — 215T 15 — 10 10
73⁄8 191⁄8
95⁄8 136 13 42 101⁄4 51⁄4 381⁄2 4 111
254T 20 15 15 15 215⁄8 266 256T 25 20 20 20
101⁄8 233⁄8
13 264
— —
284TS/T 30 25 25 25 247⁄8 392
286TS/T 40 30 30 30 125⁄8
265⁄8 15
422 15 44 101⁄2 53⁄4 401⁄2 31⁄2 124 — 3⁄4
324TS/T 50 40 40 40 283⁄4 592 12 — 13⁄4 326TS/T 60 50 50 50
141⁄8 301⁄4
173⁄8 634 18 48 71⁄4 441⁄2 4 183
364TS/T 75 60 60 60 315⁄8 834 356TS/T 100 75 75 75
151⁄8 325⁄8
187⁄8 1000
13 — 23⁄4
Three phase, Trifásico
Motor Frame
Bastidordel
motor
HP @ 3500 RPM
ODP TEFC TEFCODP
AB C P Max. Max. Max. HA HB HD HE HF HG
Bedplate Data, Datos de la placa de asientoBearing FrameShim, Cuña del
bastidor de cojinetes
Motor Shim
Cuña delmotor
Wt.(lbs.)Pesos
(libras)
HP @ 1750 RPM - T-Frame Only, Bastidor
T únicamenteWeight
(lbs)Pesos
(libras)
NPT Weight Pump Suction Discharge CP DC DD L R Drain W X Y Z (lbs) Bomba Succión Descarga Max. Max. Drenaje Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 217⁄8 63⁄4 57⁄8 93⁄8 11⁄4 5 3 51⁄2 155 21⁄2 x 3 – 8 3* 21⁄2* 223⁄8 61⁄4 51⁄4 97⁄8 113⁄16
11⁄4 51⁄8 6
33⁄8 5 140 21⁄2 x 3 – 9 215⁄8 71⁄8 6 91⁄8 71⁄2 23⁄4 51⁄2 147 21⁄2 x 3 – 10 3 21⁄2 31⁄2 3⁄8 5 21⁄2 x 3 – 13 217⁄8 87⁄8 75⁄8 93⁄8
9 3 71⁄2 201 3 x 4 – 8 223⁄16 61⁄4 53⁄8 97⁄16
1⁄4 55⁄16 7 55⁄8 144
3 x 4 – 10 4 3 22 73⁄8 61⁄2 91⁄2
33⁄4 51⁄8 71⁄2 51⁄2 161 3 x 4 – 13 217⁄8 91⁄2 81⁄8 93⁄8 5 9
3 71⁄2 217
4 x 5 – 8 5 223⁄8 67⁄8 53⁄4 97⁄8 3⁄8 51⁄2 8 5 161
4 x 6 – 10 4 221⁄2 85⁄8 71⁄2 10 41⁄2 51⁄2 81⁄2 31⁄8 7 200 4 x 6 – 13
6 221⁄8 93⁄4 81⁄8 95⁄8 51⁄4 9 3 71⁄2 233
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
Bedplate Assembly Mechanical SealInstalación de la placa de asiento Sello mecánico
KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
1.6251.624 DIA.
37⁄8
L HF
HB
13⁄4
PMAX.
SINGLE PHASE ONLYMONOFÁSICO SOLAMENTE
33⁄4 C MAX.CP
WY
DDDC MAX.
SUCTIONSUCCIÓN
DISCHARGEDESCARGA
HG
HD
NPT DRAINDRENAJE NPTHE HE
HA
AB MAX. Z R
X
(4) HOLES5⁄8 DIA.4 ORIFICIOS
*
* Dimension will include any special shims required to match pump centerline to motor.* La dimensión incluye cualquier cuña especial que se requiera para hacer coincidir la línea central de la bomba con el motor.
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
��GOULDS PUMPSAg./Irrigation
Motor Frame 3500 RPM 1750 RPM Wt. (lbs.) Bastidor 1 Phase 3 Phase 1 Phase 3 Phase AB C P Pesos del motor ODP TEFC ODP TEFC ODP TEFC ODP TEFC Max. Max. Max. (libras) 143 T 1⁄2,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 3⁄4,1,11⁄2 1⁄2,3⁄4 1⁄2,3⁄4 1⁄2,3⁄4,1 1⁄2,3⁄4,1 133⁄8 45 145 T 2 2 2,3 2,3 1,11⁄2 1,11⁄2 11⁄2,2 11⁄2,2 141⁄4 53 182 T 3 3 5 3 2 2,3 3 3 165⁄8 74 184 T 5 3,5 71⁄2 5 3 — 5 5 181⁄8 95 213 T 71⁄2 — 10 71⁄2 5 — 71⁄2 71⁄2 18 116 215 T 10 — 15 10,15 — — — — 191⁄8 136 254 T — — 20 — — — — — 215⁄8 266 256 T — — 25 20,25 — — — — 233⁄8 264 284 TS/T — — 30 25 — — — — 125⁄8 247⁄8 15 392
Wt.(lbs.) Motor Frame Size, Tamaño del bastidor Pump Suction Discharge CP DC DD R W X Y Z Pesos 140 / 180 210 250 / 280 Bomba Succión Descarga Max. Max. (libras) HL 1 x 2 – 7 31⁄2 73⁄16 51⁄2 3 4 84 — — 1 x 2 – 8 41⁄4 4 11⁄16 7 53⁄4 33⁄16 41⁄4 84 — 11⁄2 x 2 – 6 31⁄2 41⁄2 31⁄2 66 125⁄16 1013⁄16 — 11⁄2 x 2 – 8 53⁄8
11⁄4 75⁄16 5 25⁄8 41⁄4 86 — 21⁄2 x 3 – 7 3 21⁄2 1915⁄16 51⁄8 41⁄2 113⁄16 3 4 81 1211⁄16 113⁄16 77⁄16
3 x 4 – 7 4* 3* 199⁄16 53⁄4 51⁄8 33⁄4 77⁄16 21⁄2 41⁄2 114 125⁄16 1013⁄16 101⁄16
Motor Frame Motor Bearing Frame Weight (lbs.) Bastidor HA HB HD HE HF HG HP* Shim Shim Cuña del Pesos del motor Cuña marco de cojinetes (libras)
143 T 145 T 13⁄4 — 182 T
10 28 8 33⁄4 24 23⁄4 3⁄4 48
184 T
3⁄4 —
213 T 215 T
12 31 81⁄4 41⁄4 29 3 1 — — 65
254 T 256 T
13 42 91⁄4 51⁄4 381⁄2 4 13⁄4
— 1 110
284 TS/T 15 44 101⁄2 53⁄4 401⁄2 31⁄2 — 13⁄4 124
* “HP” Dimension at Motor end only. * Dimensión “HP” al extremo del motor únicamente.
Z R
X
ABMAX
HE HE
HA
DD
1⁄4" NPT HF
HB
HP
4 HOLES5⁄8 DIA.
4 ORIFICIOS
P MAX
33⁄4
3
CP
YSINGLE PHASE
ONLY
DCMAX
1.1251.124
HD
HG
W
HL
C MAX
(Motor End Only)(Extremo del motor únicamente)
DIA.
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
NOTE:1. All pumps shipped in vertical discharge position. May be rotated in 90° increments. Tighten casing bolts to 25 ft./lbs. torque.
2. Dimensions in inches, weights in lbs. Do not use for con-struction purposes.3. Motor dimensions and weights very with manufacturer.
NOTA:1. Todas las bombas se embarcan con la descarga en posición ver-tical. Esta posición puede rotarse en incrementos de 90°. Ajustar los pernos de la carcasa a una torsión de 25 pies/libras.2. Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.3. Las dimensiones y el peso de los motores varían de acuerdo al fabricante.
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
Bedplate Dimensions and Weights, Pesos y dimensiones de la place de asiento
Motor Dimensions and Weights, Peso y dimensiones del motor
51⁄4 51⁄4
57⁄8 57⁄8
73⁄8 73⁄8
101⁄8 101⁄8
*For use with ANSI class 150 mating flange. All others are NPT connections.* Para uso con brida de contacto ANSI clase 150. Todas las demás son conexiones NTP.
12
11⁄2
6
KEYWAYCHAVETERO
1⁄8 x 1⁄4
MONOFÁSICO SOLAMENTE
Packed BoxCaja prensaestopas
197⁄16
199⁄16
Pump Dimensions and Weights (Dimension “HL” determined by Pump and Motor)Peso y dimensiones de la bomba (la dimensión “HL” está determinada por la bomba y el motor)
Bedplate AssemblyInstalación de la placa de asiento
�0GOULDS PUMPSAg./Irrigation
Pump Dimensions and WeightsPeso y dimensiones de la bomba
Engineering Data – Bedplate Assembly Packed BoxDatos de ingeniería – Instalación de la placa de asiento Caja prensaestopas
Motor and Bedplate Dimensions and Weights (may vary with manufacturer.)Peso y dimensiones del motor y la placa de asiento (pueden variar de acuerdo al fabricante)
184T — — 5 5 57⁄8 18 8 95 13⁄4 — 213T — — 71⁄2 71⁄2 18 116 1 — 215T 15 — 10 10
73⁄8 191⁄8
95⁄8 136 13 42 101⁄4 51⁄4 381⁄2 4 111
254T 20 15 15 15 215⁄8 266 256T 25 20 20 20
101⁄8 233⁄8
13 264
— —
284TS/T 30 25 25 25 247⁄8 392
286TS/T 40 30 30 30 125⁄8
265⁄8 15
422 15 44 101⁄2 53⁄4 401⁄2 31⁄2 124 — 3⁄4
324TS/T 50 40 40 40 283⁄4 592 12 — 13⁄4 326TS/T 60 50 50 50
141⁄8 301⁄4
173⁄8 634 18 48 71⁄4 441⁄2 4 183
364TS/T 75 60 60 60 315⁄8 834 356TS/T 100 75 75 75
151⁄8 325⁄8
187⁄8 1000
13 — 23⁄4
Three phase, Trifásico
Motor Frame
Bastidordel
motor
HP @ 3500 RPM
ODP TEFC TEFCODP
AB C P Max. Max. Max. HA HB HD HE HF HG
Bedplate Data, Datos de la placa de asientoBearing Frame
Shim, Cuña del basti-dor de
cojinetes
Motor Shim
Cuña delmotor
Wt.(lbs.)Pesos
(libras)
HP @ 1750 RPM - T-Frame Only, Bastidor
T únicamenteWeight
(lbs)Pesos
(libras)
NPT Weight Pump Suction Discharge CP DC DD L R Drain W X Y Z (lbs) Bomba Succión Descarga Max. Max. Drenaje Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 243⁄4 63⁄4 57⁄8 121⁄4 11⁄4 77⁄8 3 51⁄2 165 21⁄2 x 3 – 8 3* 21⁄2* 251⁄4 61⁄4 51⁄4 123⁄4 113⁄16
1⁄4 8 6
33⁄8 5 150 21⁄2 x 3 – 9 241⁄2 71⁄8 6 12 71⁄2 23⁄4 51⁄2 160 21⁄2 x 3 – 10 3 21⁄2 31⁄2 3⁄8 77⁄8 21⁄2 x 3 – 13 243⁄4 87⁄8 75⁄8 121⁄4
9 3 71⁄2 215 3 x 4 – 8 221⁄16 61⁄4 53⁄8 125⁄16
1⁄4 83⁄16 7 55⁄8 155
3 x 4 – 10 4
3 247⁄8 73⁄8 61⁄2 123⁄8
33⁄4 8 71⁄2 51⁄2 170
3 x 4 – 13 243⁄4 91⁄2 81⁄8 121⁄4 77⁄8 9 3 71⁄2 230
4 x 5 – 8 5 251⁄4 67⁄8 53⁄4 123⁄4 3⁄8 83⁄8 8 5 170
4 x 6 – 10 4 253⁄8 85⁄8 71⁄2 127⁄8 41⁄2 81⁄2 31⁄8 7 210 4 x 6 – 13
6 25 93⁄4 81⁄8 121⁄2 81⁄8 9 3 71⁄2 245
NOTE:1. All pumps shipped in vertical dis-charge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for constructionpurposes.
NOTA: 1. Todas las bombas se embarcan con la descarga en posición vertical. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la po-sición deseada y ajuste los 16 pernos de 3⁄8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construcción
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.
KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
1.6251.624DIA.
37⁄8
L HF
HB
13⁄4
PMAX.
SINGLE PHASE ONLYMONOFÁSICO SOLAMENTE
33⁄4 C MAX.CP
WY
DDDC MAX.
SUCTIONSUCCIÓN
DISCHARGEDESCARGA
HG
HD
NPT DRAINDRENAJE NPTHE HE
HA
AB MAX. Z R
X
(4) HOLES5⁄8 DIA.4 ORIFICIOS
*
* Dimension will include any special shims required to match pump centerline to motor.* La dimensión incluye cualquier cuña especial que se requiera para hacer coincidir la línea central de la bomba con el motor.
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
Channel Steel Bedplate. Clockwise rotation viewed from drive end.Placa de asiento de acero acanalado. Rotación dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
�1GOULDS PUMPSAg./Irrigation
Engineering Data – Bedplate Assembly Mechanical Seal & Packed BoxDatos de ingeniería – Instalación de la placa de asiento Sello Mecánico & Caja prensaestopas
Motor and Bedplate Dimensions and Weights, Peso y dimensiones del motor y la placa de asiento
Dimensions and Weights, Pesos y dimensiones
KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
1.6251.624 DIA.
37⁄8
L HF
HB
21⁄8
PREF.
SINGLE PHASE ONLYMONOFÁSICO SOLAMENTE
33⁄4 C REF.CP
WY
DDDC MAX.
SUCTIONSUCCIÓN
DISCHARGEDESCARGA
6
HD
NPT DRAINDRENAJE NPTHE HE
HA
AB REF. Z R
X
3⁄4" DIA.4-PLACES
NOTE: 1. Dimensions in inches, weight in pounds. NOTA: 1. Dimensiones en pulgadas, peso en libras. 2. Not to be used for construction purposes. 2. No utilizar con fines de construcción.
SPACER COUPLING, ACOPLAMIENTO ESPACIADORCOUPLING GUARD, PROTECTOR DE ACOPLAMIENTO
Channel Steel Bedplate. Clockwise rotation viewed from drive end.Placa de asiento de acero acanalado. Rotación dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
▼
▼
3⁄8
Pump, Bomba Size, Tamaño Suction, Succión Discharge, Descarga CP DC Max. DD L R W X Y Z 18BF 6 x 8-13 8 6 251⁄4 123⁄4 101⁄2 135⁄8 51⁄2 83⁄8 11 3 83⁄4 19BF 8 x 10-13 10 8 261⁄2 143⁄4 13 14 63⁄4 85⁄8 123⁄4 4 10 20BF 4 x 6-16 6 4 261⁄2 123⁄4 11 1213⁄16 41⁄2 85⁄8 12 4 101⁄2
Motor Data Baseplate Data
HP @ 3500 RPM HP @ 1750 RPM
Three Phase, Trifásica AB Ref. C Ref. P Ref. HA HB HD HE HF
ODP TEFC ODP TEFC Open Encl. 284T/286T 25, 30 25, 30 12.20 21.22 13.62 340 405 2" 324T/326T 40, 50 40, 50 14.13 30 16.50 440 580 1" 324TS/325TS 50, 60 40, 50 29 480 520 364T/365T 60, 75 60, 75 15.06 34 18.25 665 835
48
43.75 244
364TS/365TS 75, 100 60, 75 32 730 820 N/A 404TS/405TS 125, 150 100 18 36 20.13 950 1150 18BF 404T/405T 100, 125 100 39 930 1160
29.06
15.75 13.66 1"
444TS/445TS 200-300 125, 150 19.56 41 22.38 1250 1615 444T/445T 150-300 125-200 45 1370 1650 60.25 56 345 447TS 350 200 47 1800 2550 N/A 449TS 400-450 250-400 21.69 51 23.75 1850 2550 447T 350 250 48 1800 2260 324T/326T 40, 50 40, 50 14.13 30 16.50 440 580 1" 324TS/325TS 50, 60 40, 50 29 480 520 364T/365T 60, 75 60, 75 15.06 34 18.25 665 835 48 43.75 244 364TS/365TS 75, 100 60, 75 32 730 820 N/A 404TS/405TS 125, 150 100 18 36 20.13 950 1150 19BF 404T/405T 100, 125 100 39 930 1160 29.06 15.75 13.66 1" 444TS/445TS 200-300 125, 150 19.56 41 22.38 1250 1615 444T/445T 150-300 125-200 45 1370 1650 60.25 56 345 447TS 350 200 47 1800 2550 N/A 449TS 400-450 250-400 21.69 51 23.75 1850 2550 447T 350 250 48 1800 2260 324T/326T 40, 50 40, 50 14.13 30 16.50 440 580 1" 324TS/325TS 50, 60 40, 50 29 480 520 364T/365T 60, 75 60, 75 15.06 34 18.25 665 835 48 43.75 244 364TS/365TS 75, 100 60, 75 32 730 820 N/A 404TS/405TS 125, 150 100 18 36 20.13 950 1150 20BF 404T/405T 100, 125 100 39 930 1160 29.06 15.75 13.66 1" 444TS/445TS 200-300 125, 150 19.56 41 22.38 1250 1615 444T/445T 150-300 125-200 45 1370 1650 60.25 56 345 447TS 350 200 47 1800 2550 N/A 449TS 400-450 250-400 21.69 51 23.75 1850 2550 447T 350 250 48 1800 2260
PumpSize,
Tamaño de
Bomba
MotorFrame,Bastidor
del motor
Weight(lb),
Pesos(libras)
Shim HeightUnder MotorShim Height
UnderMotor
Weight (lbs) Ref.,
Pesos (libras) Ref.
+/- 1⁄4 +/- 1⁄4 +/- 1⁄8 +/- 1⁄16 +/- 1⁄16
��GOULDS PUMPSAg./Irrigation
Pump Suction Discharge DC NPT Drain Weight (lbs.) Bomba Succión Descarga CP (Max.) DD J K M N R Drenaje W X Y Z Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 257⁄16 63⁄4 57⁄8 — — — — 11⁄4 77⁄8 3 51⁄2 235 21⁄2 x 3 – 8 3* 21⁄2* 2515⁄16 61⁄4 51⁄4 — — — — 113⁄8
1⁄4 8
6 33⁄8 5 220
21⁄2 x 3 – 9 253⁄16 71⁄8 6 — — — — 71⁄2 23⁄4 51⁄2 230 21⁄2 x 3 – 10 3 21⁄2 31⁄2
3⁄8 77⁄8
21⁄2 x 3 – 13 255⁄16 87⁄8 75⁄8 — — — — 9 3 71⁄2 285 3 x 4 – 8 223⁄4 61⁄4 53⁄8 — — — —
1⁄4 83⁄16 7 55⁄8 225 3 x 4 – 10 4 3 259⁄16 73⁄8 61⁄2 — — — — 33⁄4 8 71⁄2 51⁄2 240 3 x 4 – 13 257⁄16 91⁄2 81⁄8 — — — — 77⁄8 9
3 71⁄2 300
4 x 5 – 8 5 2513⁄16 67⁄8 53⁄4 — — — — 83⁄8 8 5 240 4 x 6 – 10 4 271⁄16 85⁄8 71⁄2 — — — — 41⁄2
3⁄8 83⁄8 81⁄2 31⁄8 7 280 4 x 6 – 13 6 2511⁄16 93⁄4 81⁄8 — — — — 81⁄8 9 3 71⁄2 315 ■ 4 X 6 – 16 273⁄16 123⁄4 11 115⁄16 93⁄4 16 7 85⁄8 12 4 101⁄2 500 ■ 6 X 8 – 13 8 6 2515⁄16 123⁄4 101⁄2 23⁄8 71⁄2 13 51⁄2 51⁄2 83⁄8 11 3 83⁄4 400 ■ 8 x 10 – 13 10 8 273⁄16 143⁄4 13 23⁄8 71⁄2 13 51⁄2 63⁄4 85⁄8 123⁄4 4 10 585
Dimensions and WeightsPesos y dimensiones
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.Dimensions in inches, weights in lbs. Do not use for construction purposes.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
NOTE:1. All pumps shipped in horizontal discharge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for construction purposes.
NOTA: 1. Todas las bombas se embarcan con la descarga en posición horizontal. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posición deseada y ajuste los 16 pernos de 3/8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construc-ción.
SAE #1 – 5
N NM
2 HOLES.56 DIA.
2 ORIFICIOS
X
K
Z R Y W
DCMAX.
DD
CP
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
NPT DRAINDRENAJE NPT J
1.6251.624KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
DIA.
SAE drive number is determined by the engine flywheel housing size.
El número del mando SAE se determina por el tamaño de la caja del volante del motor.
V1 V2
SAE # V1 V2
1, 3, 5 131⁄4 11⁄2 2, 4 13 13⁄4
SAE Drive Dimensions and Weights Packed BoxPesos y dimensiones del mando SAE Caja prensaestopas
��GOULDS PUMPSAg./Irrigation
Pump Suction Discharge DC NPT Drain Weight (lbs.) Bomba Succión Descarga CP (Max.) DD J K M N R Drenaje W X Y Z Pesos NPT (libras) 11⁄2 x 2 –10 2* 11⁄2* 229⁄16 63⁄4 57⁄8 — — — — 11⁄4 5 3 51⁄2 235 21⁄2 x 3 – 8 3* 21⁄2* 231⁄16 61⁄4 51⁄4 — — — — 113⁄16
1⁄4 51⁄8
6 33⁄8 5 220
21⁄2 x 3 – 9 225⁄16 71⁄8 6 — — — — 71⁄2 23⁄4 51⁄2 230 21⁄2 x 3 – 10 3 21⁄2 31⁄2
3⁄8 5
21⁄2 x 3 – 13 227⁄16 87⁄8 75⁄8 — — — — 9 3 71⁄2 285 3 x 4 – 8 197⁄8 61⁄4 53⁄8 — — — —
1⁄4 55⁄16 7 55⁄8 225 3 x 4 – 10 4 3 2211⁄16 73⁄8 61⁄2 — — — — 33⁄4 51⁄8 71⁄2 51⁄2 240 3 x 4 – 13 229⁄16 91⁄2 81⁄8 — — — — 5 9
3 71⁄2 300
4 x 5 – 8 5 2215⁄16 67⁄8 53⁄4 — — — — 51⁄2 8 5 240 4 x 6 – 10 4 245⁄16 85⁄8 71⁄2 — — — — 41⁄2
3⁄8 51⁄2 81⁄2 31⁄8 7 280 4 x 6 – 13 6 2213⁄16 93⁄4 81⁄8 — — — — 51⁄4 9 3 71⁄2 315 ■ 4 x 6 – 16 273⁄16 123⁄4 11 17⁄8 93⁄4 16 7 85⁄8 12 4 101⁄2 500 ■ 6 x 8 – 13 8 6 2515⁄16 123⁄4 101⁄2 23⁄8 71⁄2 13 51⁄2 51⁄2 83⁄8 11 3 83⁄4 400 ■ 8 x 10 – 13 10 8 273⁄16 143⁄4 13 23⁄8 71⁄2 13 51⁄2 63⁄4 85⁄8 123⁄4 4 10 585
Dimensions and WeightsPesos y dimensiones
*Denotes NPT connection. All other connections are for use with ANSI class 150 mating flanges.Dimensions in inches, weights in lbs. Do not use for construction purposes.* Indica conexión NPT Las demás conexiones deben usarse con bridas de contacto ANSI clase 150.Dimensiones en pulgadas, peso en libras. No utilizar para fines de construcción.■ Indicates “L” Group pump., ■ Indica una bomba Grupo “L”.
NOTE:1. All pumps shipped in horizontal discharge position. For other orientations, remove casing bolts, rotate to desired position, and tighten 3⁄8 - 16 casing bolts to 37 ft./lbs. torque., 1⁄2 - 13 casing bolts to 90 ft./lbs. torque.
2. Dimensions in inches, weight in pounds.3. Not to be used for construction purposes.
NOTA: 1. Todas las bombas se embarcan con la descarga en posición horizontal. Para otras orientaciones, retire los pernos de la carcasa, haga rotar la descarga hasta la posición deseada y ajuste los 16 pernos de 3/8 de pulgada a una torsión de 37 pies/libra, y los 13 pernos de 1/2 pulgada a 90 pies/libra.2. Dimensiones en pulgadas, peso en libras.3. No utilizar con fines de construc-ción.
SAE #1 – 5
N NM
2 HOLES.56 DIA.
2 ORIFICIOS
X
K
Z R Y W
DCMAX.
DD
CP
DISCHARGEDESCARGA
SUCTIONSUCCIÓN
NPT DRAINDRENAJE NPT J
1.6251.624
KEYWAY 3⁄16 x 3⁄8CHAVETERO 3⁄16 x 3⁄8
DIA.
SAE drive number is determined by the engine flywheel housing size.
El número del mando SAE se determina por el tamaño de la caja del volante del motor.
V1 V2
SAE # V1 V2
1, 3, 5 131⁄4 11⁄2 2, 4 13 13⁄4
SAE Drive Dimensions and Weights Mechanical SealDimensiones y pesos del mando SAE
ITT
Goulds Pumps and the ITT Engineered Blocks Symbol are registered trademarks and tradenames of ITT Industries Inc.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
BAGFLO March, 2006© 2006 ITT Water Technology, Inc.
Engineered for life
Ag./Irrigation,Agr/Irrigación
Specifications
Capacities to: 1600 GPM (363 m3/hr) at 3500 RPM4500 GPM (1020 m3/hr) at 1750 RPM
Heads to: 490 feet TDH (150 m) at 3500 RPM300 feet TDH (90 m) at 1750 RPM
Working pressure to: 175 PSIG (12 bars)
Suction pressure to: 100 PSIG (7 bars)
Maximum temperature to: 212°F (100°C) with standard seal or 250°F (121°C) with optional seal.
Motor: NEMA standard JM frame for 3656 or T-frame for 3756 mechanical seal, JP or T-frame for packed box. Open drip proof, totally enclosed fan cooled and explosion proof enclosures avail-able. Single phase (115/230 V), ½-3 HP, (230 V) 5-7½ HP, and three phase (208 – 230/460 V) 2 – 150 HP are available at 1750 or 3500 RPM.
Direction of Rotation: Clockwise viewed from motor end.
Especificaciones
Capacidad hasta:1600 GPM (363 m 3/hr) a 3500 RPM4500 GPM (1020 m 3/hr) a 1750 RPM
Cargas hasta:490 pies (150 m) carga dinámica total a 3500 RPM300 pies (90 m) carga dinámica total a 1750 RPM
Presión de operación hasta:75 PSIG (12 bars)
Presión de succión hasta:100 PSIG (7 bars)
Temperatura máxima:212 °F (100 °C) con sello estándar o250 °F (121 °C) con sello optativo.
Motor:NEMA JM estándar en el modelo 3656 y bastidor NEMA T estándar en el modelo 3756 con sello mecánico, bastidor JP o T para caja prensaestopas. Las cubiertas disponibles son: abierta a prueba de filtración, totalmente encerrada con enfriamiento por ventilador y a prueba de explosiones. Motores monofásicos (115/230 V), ½-3 HP (230 V) 5-7½ HP, y trifásicos (208 – 230/460 V) 2 – 150 HP disponibles a 1750 ó 3500RPM.
Dirección de rotación:Dextrorsa (sentido de las agujas del reloj) cuando se mira desde el extremo del motor.
• Booster service
• Spraying systems
• Irrigation
• Water circulation
• Liquid transfer
• General purpose pumping
• Servicio de refuerzo
• Sistemas de rociado
• Sistemas de riego
• Circulación de agua
• Transferencia de líquidos
• Aplicaciones de bombeo en general
Typical Applications Aplicaciones típicas
Goulds Pumps y el símbolo ITT Engineered Blocks son marcas registradas y marcas comerciales de ITT Industries.LAS ESPECIFICACIONES ESTÁN SUJETAS A CAMBIO SIN PREVIO AVISO.