EDA

MIL-SPEC 21266 GROMSTRIP

GROMSTRIP

1

Gromstrip is a continuous length of extruded U-channel for use asa protective covering on sharp edges. It can be cut to desiredlength and inserted into any hole, regardless of configuration.Gromstrip requires minimum space, grips surfaces snugly, and won’tjar loose. Wherever wires pass through a metal piece, Gromstripused on the sharp edges will protect against fraying and cut-through of the wires. Gromstrip is also available with continuousserrations for use in acute angles or other difficult applications. (Onangles less than 90°, miter the two outside edges for a better fit.)

Polyethylene - used for general application.

Nylon - used where an abrasion-resistant material is desired; it hasa higher operating temperature, and better dielectric constant thanpolyethylene.

Standard color for both Polyethylene and Nylon is natural.

0.0310.1090.1560.1880.250

0.792.773.964.786.35

Dimensions*

inches mmGSP-1GSP-2GSP-3GSP-4GSP-5

GSPC-1GSPC-2GSPC-3GSPC-4GSPC-5

PolyethyleneCatalog Number

SerratedPolyethyleneCatalog Number

Size Size50, 10050, 10050, 10050, 10025, 100

ft / pkg

*Tolerance: 0.010 in. (0.25 mm)

0.1250.1720.1880.1880.188

3.184.374.784.784.78

inches mm0.0310.0310.0470.0470.047

0.790.791.191.191.19

inches mmTo 0.036

0.037-0.0710.106-0.1640.165-0.1870.188-0.250

To 0.910.94-1.802.69-4.174.19-4.754.78-6.35

inches mm

0.0310.1090.1560.1880.250

0.792.773.964.786.35

Dimensions*

inches mmGSN-1GSN-2GSN-3GSN-4GSN-5

GSNC-1GSNC-2GSNC-3GSNC-4GSNC-5

NylonCatalog Number

SerratedNylonCatalog Number

Size Size

PanelThickness

50, 10050, 10050, 10050, 10025, 100

StandardPackage

ft / pkginches mm0.0310.1090.1560.1880.250

0.792.773.964.786.35

inches mmA ED

To 0.0360.037-0.0710.106-0.1640.165-0.1870.188-0.250

To 0.910.94-1.802.69-4.174.19-4.754.78-6.35

inches mm

PanelThickness

StandardPackage

0.1500.1750.2200.3250.3850.445

3.814.455.598.269.7811.30

Dimensions

inches mmGSNCM-1GSNCM-2GSNCM-3GSNCM-4GSNCM-5GSNCM-6

NylonCatalog NumberSize

50, 10050, 10050, 10050, 10050, 10050, 100

pcs / pkg0.0560.0900.1310.1950.2600.320

1.422.293.334.956.608.13

inches mm0.0550.0550.0550.0700.0700.075

1.401.401.401.781.781.91

inches mmA CB

0.015-0.0520.052-0.0850.085-0.1280.128-0.1920.192-0.2550.255-0.318

0.38-1.321.32-2.162.16-3.253.25-4.884.88-6.486.48-8.08

inches mm

PanelThickness

StandardPackage

0.100.100.100.160.170.18

2.542.542.544.064.324.57

inches mmD

GSNCM

GSP GSNGSPCGSNC

0.1250.1720.1880.1880.188

3.184.374.784.784.78