1.1. Standard drawing sheets with layoutStandard drawing sheets with layout 图纸幅面和格式 (( GB/T 14689—1993GB/T 14689—1993 ))
Title block Title block 标题栏(( GB/T 10609.1GB/T 10609.1——19891989 ))
3. 3. Lettering Lettering 字体(( GB/T 14691—1993GB/T 14691—1993 ))
2.2. ScaleScale 比例(( GB/T 14690—1993GB/T 14690—1993 ))
4. 4. Line styles Line styles 图线(( GB/T 4457.4GB/T 4457.4——20022002 ))
Related Provisions in National StandardsRelated Provisions in National Standards 国家标准有关规定国家标准有关规定
5. 5. Dimensioning Dimensioning 尺寸注法(( GB/T 4458.4GB/T 4458.4——20032003 ))
请点击鼠标左键显示后面内容请点击鼠标左键显示后面内容
本 小 节 结 束
谢谢您的认真学习!谢谢您的认真学习!前一页前一页
1261
1471
1682
1982
2102
2523
630
1051A45
A44
A43
A0841
11890
A1
594 1486 1783 2080 2378
A33 A34
891
420A2
297
A3
210A4
幅面的尺寸由基本幅面的短边成整数倍增加后得出。必要时,可以按规定加长图纸的幅面。图中虚线为加长后的图纸幅面。
Standard drawing sheets with layoutStandard drawing sheets with layout 图纸幅面及格式图纸幅面及格式(( GB/T 14689GB/T 14689——19931993 ))
The code of surface The code of surface (( 幅面代号幅面代号 ))
B×L B×L (( 尺寸尺寸 ))
aa cc ee
A0A0 841×1189841×1189
25251010
2020A1A1 594×841594×841
A2A2 420×594420×594
1010A3A3 297×420297×42055
A4A4 210×297210×297
请请点点击击鼠鼠标标左左键键显显示示后后面面内内容容
Drawing sheets without binding are area装订图框格式
c
Title blocks标 题 栏
X 型 Y 型L
B
c
c
a
L
Title blocks标 题 栏
B
c a
c
Border area 周边
Border lines 图框线Sheet frame
纸边界线
c
Standard drawing sheets with layoutStandard drawing sheets with layout 图纸幅面及格式图纸幅面及格式(( GB/T 14689GB/T 14689——19931993 ))
Drawing sheets with binding area
不装订的图框格式
Title blocks标 题 栏
X 型 Y 型L
B
ee
e
L
Title blocks标 题 栏
B
e
ee
e e
Standard drawing sheets with layoutStandard drawing sheets with layout 图纸幅面及格式图纸幅面及格式(( GB/T 14689GB/T 14689——19931993 ))
Title block Title block 标题栏标题栏(( GB/T 10609.1—1989GB/T 10609.1—1989 ))
学校的制图作业中常采用简化的标题栏,建议采用推荐的尺寸与格式学校的制图作业中常采用简化的标题栏,建议采用推荐的尺寸与格式
( 校核 )
( 班级 )
( 日期)
( 校名 )
( 图名 )
( 材料 )
( 比例 )
( 学号 ) ( 图号 )
( 审核)
( 设计 )
( 共 张 ) ( 第 章 )
( 日期)
( 批准)
( 审核) ( 工艺)
( 材料标记 )( 单位名称 )
( 图样名称 )
( 图样代号 ) ( 重量)
( 比例)
( 标记 ) ( 更改文件号 )
( 签名)
( 阶段标记 )
( 共 张 ) ( 第 章 )
( 日期)( 日期)( 日期)
( 签名)( 签名)
( 设计)
( 日期)( 日期)( 日期)
( 标准化 )
(处数)(分区)
( 存储代号 )
请请点点击击鼠鼠标标左左键键显显示示后后面面内内容容
ScaleScale 比例比例(( GB/T 14690 GB/T 14690 — —
19931993 ))
Originality scaleOriginality scale 原值比例原值比例
1:1
Down scaleDown scale
缩小比例缩小比例(1:1.5) 1:2 (1:2.5) 1:3 (1:4) 1:5 (1:6) 1:1×10n
(1:1.5×10n) 1:2×10n (1:2.5×10n) (1:4×10n) 1:5×10n (1:6×10n)
Enlarged scaleEnlarged scale
放大比例放大比例2:1 (2.5:1) (4:1) 5:1 1×10n:1 2.5×10n:1 (4×10n:1) 5×10n:1
The size of the drawingThe size of the drawing图形尺寸图形尺寸
The size of the objectThe size of the object实物尺寸实物尺寸
英国比例英国比例
Lettering (Style) Lettering (Style) 字体字体(( GB/T 14691GB/T 14691——19931993 ))
Chinese characters should Chinese characters should be the “Fang Song”be the “Fang Song”汉字为长仿宋体汉字为长仿宋体
The font for all characters can be in italic fontThe font for all characters can be in italic font数字、字母均为斜体数字、字母均为斜体英国字例英国字例
Description 图 线 名 称
Line example图 线 型 式
Width图线宽度
Usage应 用 举 例
Continuous thick line 粗实线
dd To indicate visible outlines,edgesTo indicate visible outlines,edges 可见轮廓线,可见棱边线可见轮廓线,可见棱边线
Continuous thin line 细实线
d/2d/2 For fictitious outlines, dimensions, projection hatching For fictitious outlines, dimensions, projection hatching and leader lines, also for the outline of coincidence and leader lines, also for the outline of coincidence section, root of thread section, root of thread 尺寸线及尺寸界线、剖面线、重合断面的尺寸线及尺寸界线、剖面线、重合断面的轮廓线、螺纹的牙底线及齿轮的齿根线、引出线等轮廓线、螺纹的牙底线及齿轮的齿根线、引出线等
Irregular ( continuous thin ) line 波浪线
d/2d/2 Part sectional boundary lines or to terminate a part view, Part sectional boundary lines or to terminate a part view, and for short break line and for short break line 断裂处的边界线、视图与剖视的分界线断裂处的边界线、视图与剖视的分界线
Continuous thin straight line with intermittent zigzag 双折线
d/2d/2 To show a break on an adjacent member to which a To show a break on an adjacent member to which a component is attached component is attached 断裂处的边界线断裂处的边界线
Thin dashed line 细虚线 d/2d/2 Hidden edges, hidden outlines. (Long line=12d,Hidden edges, hidden outlines. (Long line=12d,granularity=3d) granularity=3d) 不可见轮廓线不可见轮廓线 ,, 不可见棱边线不可见棱边线 (( 画长画长 12d,12d, 短间隔短间隔长长 3d)3d)
Thick dashed line 粗虚线 dd Shown can be made surface-treatment. (Long line=12d,Shown can be made surface-treatment. (Long line=12d,granularity=3d) granularity=3d) 允许表面处理的表示线 允许表面处理的表示线 (( 画长画长 12d,12d, 短间隔长短间隔长 3d)3d)
Thin long dashed dotted line 细点画线
d/2d/2 Axis lines, symmetrical center lines, etc. (Long line=24d,Axis lines, symmetrical center lines, etc. (Long line=24d,granularity=6, granularity=6, dot=3d) =3d) 轴线、对称中心线、分度圆(线)、剖切轴线、对称中心线、分度圆(线)、剖切线、孔系分布的中心线等线、孔系分布的中心线等 (( 长画长长画长 24d,24d, 短间隔长短间隔长 3d,3d, 短画长短画长 =3d)=3d)
Thick long dashed dotted line 粗点画线
dd To indicate a cutting plane for sectional views. (Long To indicate a cutting plane for sectional views. (Long line=24d,granularity=6, line=24d,granularity=6, dot=3d) =3d) 限定范围表示线限定范围表示线 (( 长画长长画长 24d,24d,短间隔长短间隔长 3d,3d, 短画长短画长 =3d)=3d)
Thin long dashed double dotted line 细双点画线
d/2d/2 To indicate adjacent parts alternative and extreme To indicate adjacent parts alternative and extreme positions of moving parts, also to indicate imaginary line positions of moving parts, also to indicate imaginary line (Long line=24d,granularity=6, (Long line=24d,granularity=6, dot=3d) =3d) 相邻辅助零件的轮廓线、相邻辅助零件的轮廓线、可动零件的极限位置的轮廓线、中断线等可动零件的极限位置的轮廓线、中断线等 (( 长画长长画长 24d,24d, 短间隔长短间隔长 3d,3d,短画长短画长 =3d)=3d)
Line stylesLine styles 图线图线(( GB/T 4457.4—2002GB/T 4457.4—2002 ))
Line stylesLine styles 图线图线(( GB/T 4457.4—2002GB/T 4457.4—2002 ))
Axis line, thin dashed dotted line 轴线 细点画线
Center line, thin dashed dotted line 对称中心线 细点画线
Visible edges and outlines, continuous thick line 可见轮廓线 粗实线
Dimension line, continuous thin line 尺寸线 细实线
Extension line, continuous thin line 尺寸界线 细实线
Boundary between view and section view, continuous thin irregular line视图和剖视分界线 波浪线
The broken part, boundary, continuous thin straight line with intermittent zigzags断裂处的边界线 双折线
Imaginary line,long dashed double dotted thin line相邻辅助零件轮廓线 双点画线
Hidden edges, thin dashed line 不可见轮廓线 细虚线
请请点点击击鼠鼠标标左左键键显显示示后后面面内内容容
The example of drawing lines manipulate 图线的应用举例图线的应用举例
英国图例英国图例
Line stylesLine styles 图线图线(( GB/T 4457.4—2002GB/T 4457.4—2002 ))
请请点点击击鼠鼠标标左左键键显显示示后后面面内内容容
The example of center lineThe example of center line 中心线的画法举例中心线的画法举例
Correct Correct 正确正确
Small circleSmall circle 较小圆较小圆
WrongWrong 错误错误
The center line should connect with the line segment中心线应是线段相交
Should be longer than the segment应超出轮廓线外
Should leave some space 2 ~ 5mm超出轮廓 2 ~ 5mm
The end point can't be dotted首末两端不应是短画点
There is no room in the circle center, and can't be dotted圆心不应是短画点或间隙
Should be a short line, not a dot
应是短画点 ,而非圆点
Too long超出轮廓太长
The center line of small circle can be replace by continuous thin line 较小圆中心线可 以用细实线代替
Line stylesLine styles 图线图线(( GB/T 4457.4—2002GB/T 4457.4—2002 ))
请点击鼠标左键显示后面内容请点击鼠标左键显示后面内容
The example of drawing lines manipulate 图线的应用举例图线的应用举例
虚线与粗实线相 接处应留出空隙
虚线与虚线相接处不留空隙
错误 正确
Dimensioning Dimensioning 尺寸注法尺寸注法(( GB/T4458.4GB/T4458.4——20032003 ))
1. 1. Basic rulesBasic rules 尺寸标注基本规则尺寸标注基本规则
小尺寸在内 大尺寸在外
尺寸界线
尺寸箭头
尺寸数字
尺寸线
尺寸界线伸出 2 ~ 3mm
尺寸线与轮廓线及其他尺寸线的间距为 6 ~ 8mm
请请点点击击鼠鼠标标左左键键显显示示后后面面内内容容
尺寸数字在尺寸线上方或左方 , 字头向上方或左方
Dimensioning Dimensioning 尺寸注法尺寸注法(( GB/T4458.4GB/T4458.4——20032003 ))
2. 2. The example of dimensionThe example of dimension 尺寸标注示例尺寸标注示例
Scale Scale 比例比例
Lettering (Style) Lettering (Style) 字体字体
Line stylesLine styles 图线图线