1
Lecture 3: Transactions and Recovery
Transactions (ACID) Recovery
Advanced Databases CG096
Nick Rossiter [Emma-Jane Phillips-Tait]
2
Content
What is a Transaction? ACID properties Transaction Processing Database Recovery
3
1. What is a Transaction?Definition The sequence of logically linked actions that access a common database
often used in online or live systems
Examples Airlines operation
Reserve an airline seat. Buy an airline ticket. Assemble cabin crew. Fly. ATM Cash operation
Check credentials. Check money. Withdraw amount from account. Pay amount.
Credit card sale Log on with the card. Verify credit card details. Check money. Deliver goods.
Issue withdrawal. Internet sale
Request an item from an on-line catalogue. Check availability. Provide credit card details. Check details. Issue order. Dispatch. Issue withdrawal.
4
DatabaseApplication
DatabaseServer
UserUser...
DataSchema
DatabaseApplication
DatabaseApplication
DataSchema Data
Schema
SystemDictionary
UserDirectory
DBMS
DB Clients
Origin and Needs for Transactions in DB
5
Automated Teller Machines (ATM)
ATMn
Bank Server
BankNetwork
ATM1
AccountsDatabase
AmountRequested
BalanceChecked
WithdrawalConfirmed
CashReceived
AccountDebited
Cash Withdrawal Transaction
Start Finish
6
2. A.C.I.D. properties Transactions have 4 main properties
Atomicity - all or nothing Consistency - preserve database integrity Isolation - execute as if they were run alone Durability - results are not lost by a failure
7
2.1 Atomicity All-or-nothing, no partial results. An event either happens and is
committed or fails and is rolled back. e.g. in a money transfer, debit one account, credit the other. Either
both debiting and crediting operations succeed, or neither of them do. Transaction failure is called Abort
Commit and abort are irrevocable actions. There is no undo for these actions.
An Abort undoes operations that have already been executed For database operations, restore the data’s previous value from
before the transaction (Rollback-it); a Rollback command will undo all actions taken since the last commit for that user.
But some real world operations are not undoable.Examples - transfer money, print ticket, fire missile
8
2.2 Consistency Every transaction should maintain DB consistency
Referential integrity - e.g. each order references an existing customer number and existing part numbers
The books balance (debits = credits, assets = liabilities) Consistency preservation is a property of a transaction, not of
the database mechanisms for controlling it (unlike the A, I, and D of ACID)
If each transaction maintains consistency, then a serial execution of transactions does also
9
2.3 Isolation
Intuitively, the effect of a set of transactions should be the same as if they ran independently. Formally, an interleaved execution of transactions is
serializable if its effect is equivalent to a serial one. Implies a user view where the system runs each user’s
transaction stand-alone.
Of course, transactions in fact run with lots of concurrency, to use device parallelism – this will be covered later. Transactions can use common data (shared data) They can use the same data processing mechanisms (time sharing)
10
2.4 Durability When a transaction commits, its results will survive failures
(e.g. of the application, OS, DB system … even of the disk). Makes it possible for a transaction to be a legal contract. Implementation is usually via a log
DB system writes all transaction updates to a log file to commit, it adds a record “commit(Ti)” to the log
when the commit record is on disk, the transaction is committed.
system waits for disk ack before acknowledging to user
11
3. Transaction Processing
Identifying critical points for database changes through set of database states
Preparation for control over transaction progress using labels of transaction states
Management of the transactions using explicit manipulation of transaction states and enforcing
transaction operations
Can be automatic (controlled by the RDBMS) or programmatic (programmed using SQL or other supported programming languages, like PL/SQL)
12
3.1 Database State and Changes
D1, D2 - Logically consistent states of the database data
T - Transaction for changing the databaset1, t2 - Absolute time before and after the transaction
State D1 State D2
T
t1 t2
13
Transaction Parameters diff D = D2 D1 can have different scale:
single data item in one memory area many items across several files and databases structural changes such as new database schema
t = t2 - t1 is the time for executing T
T occupies real physical resources
between D1 and D2 there may be intermediate states D11, D12 …;
some of them can be inconsistent
the final state D2 could be unreachable
When T fails first come back to D1 (recovery) then try again to reach D2 (redo)
14
Transaction Operations 1 • For recovery purposes the system needs to keep track of
when a transaction starts, terminates and commits.
begin: marks the beginning of a transaction execution
end: specifies that the read and write operations have ended marks the end limit of transaction execution
commit: signals a successful end of the transaction Any updates executed by the transaction can be safely
committed to the database and will not be undone
15
Transaction Operations 2 rollback: signals that the transaction has ended
unsuccessfully Any changes that the transaction may have applied to the
database must be undone
undo: similar to rollback but it applies to a single operation rather than to a whole
transaction
redo: specifies that certain transaction operations must be redone to ensure that all the operations of a committed transaction
have been applied successfully to the database
16
Reading and WritingSpecify read or write operations on the database items that areexecuted as part of a transaction read (X): reads a database item named X into a program variable also
named X.1. find the address of the disk block that contains item X2. copy that disk block into a buffer in the main memory3. copy item X from the buffer to the program variable
write (X): writes the value of program variable X into the database1. find the address of the disk block that contains item X2. copy that disk block into a buffer in the main memory3. copy item X from the program variable named X into its
current location in the buffer 4. store the updated block in the buffer back to disk (this step
updates the database on disk)
17
active partially committed committed
aborted terminated
BEGIN
READ , WRITE
END
ROLLBACKROLLBACK
COMMIT
3.2 Transaction State and Progress
A transaction reaches its commit point when all operations accessing the database are completed and the result has been recorded in the log. It then writes a [commit, <transaction-id>] and terminates.
When a system failure occurs, search the log file for entries[start, <transaction-id>]
and if there are no logged entries [commit, <transaction-id>]then undo all operations that have logged entries
[write, <transaction-id>, X, old_value, new_value]
18
3.3 Controlling Transactions
State D1 State D2State D2
t1 t3t2 t4
Log L3Log L3Log L2
Log L2Log L1Log L1
T
Log the initialstate
Log theoperation
Log thefinal result
Prepare thechange
Change to newstate
19
Logging transaction states Save the initial database state D1 before starting the transaction T: D1->D2
(transaction begins) Save all intermediate states D11, D12 … (checkpoint logs) In the case of a failure at an intermediate state D1i before reaching D2
restore D1 (rollback) the simplest strategy is to apply a series of atomic actions R which change
the state to the initial state R: D1i->D1
In the case of successful reach of the last intermediate state D2, force-write or flush the log file to disk and change the database state to it (transaction ends)
Note: if the transactions are controlled in SQL (using COMMIT), the rollback operation should be initiated explicitly (using ROLLBACK)
2017
Entries in the log file
[start, <transaction-id>]: the start of the execution of the transaction identified by transaction-id
[read, <transaction-id>, X]: the transaction identified by transaction-id reads the value of database item X
[write, <transaction-id>, X, old-value, new-value]: the transaction identified by transaction-id changes the value of database item X from old-value to new-value
[commit, <transaction-id>]: the transaction identified by transaction-id has completed all data manipulations and its effect can be recorded
[rollback, <transaction-id>]: the transaction identified by transaction-id has been aborted and its effect lost
Procedure Credit ( trans_id INTEGER, accno INTEGER, bcode CHAR(6), amount NUMBER) old NUMBER; new NUMBER; begin SELECT balance INTO old FROM account WHERE no = accno and branch = bcode;
new := old + amount; UPDATE account SET amount = new WHERE no = accno and branch = bcode;
COMMIT;
EXCEPTION WHEN FAILURE THEN ROLLBACK; END credit;
21
Controlling Subtransactions All intermediate states of the transaction which are end states
of the defined subtransactions should become consistent database states
In the case of successful reach of an intermediate state of this type the actions are temporary suspension of transaction execution forced writing of all updated database blocks in main memory
buffers to disk flush the log file resume transaction execution
Note: If the transactions are controlled in SQL, the rollback operation can be made to an intermediate state which is labeled (using ROLLBACK TO <label>)
22
Adding checkpoints to the log file
A [checkpoint, <label>] record is created each time a new checkpoint is encountered
[commit,<transaction-id>] entries for the active subtransactions are automatically written when the system writes to the database the effect of write operations of a successful transaction
In the case of a rollback to a given checkpoint within a transaction an entry [commit,<transaction-id>] is logged against this
subtransaction In the case of a rollback of the global transaction to a given
checkpoint no subtransactions in the path will be committed either
23
4. Database Recovery Need for recovery from failure during transaction
for preventing the loss of data for avoiding global inconsistency of the database for analyzing the possible reasons for failure
Factors considered in database recovery what is the nature of the failure? when did the problem occur in the transaction? what do we need to recover?
24
4.1 Categories of Transactions at Failuretcheck tfa il
T1
T2
T3
T4
T5
T1 - Can be ignored (committed before the previous checkpoint)T2 - Must Redo complete (the database will be rolled back to a state when the transaction was not committed)T3 - Must Undo (not finished, and rollback to a state when not finished)T4 - Must Redo if possible (finished, but not committed)
T5 - Must Undo (did not finish and the rollback will lead to a state before it was even started)
25
4.2 Types of Failure
Catastrophic failure Restore a previous copy of the database from archival backup Apply transaction log
to reconstruct a more current state by redoing committed transaction operations up to failure point
Perform an incremental dump logging each transaction Non-catastrophic failure
Reverse the changes that caused the inconsistency by undoing the operations and possibly redoing legitimate changes which were lost
The entries kept in the system log are consulted during recovery. No need to use the complete archival copy of the database.
If an error or hardware/software crash occurs between the begin and end of transaction, the database will be inconsistent
26
4.3 Recovery Strategy Mirroring
keep two copies of the database maintained simultaneously Backup
periodically dump the complete state of the database to some form of tertiary storage
System Logging keep track of all transaction operations affecting the values of
database items. the log is kept on disk so that it is not affected by failures except
for disk and catastrophic failures.
27
Deferred Update: no actual update of the
database until the transaction reaches its commit point
1. Updates recorded in log 2. Transaction commit point 3. Force log to the disk 4. Update the database
Immediate Update: the database may be updated by
some operations of a transaction before it reaches its commit point.
1. Update X recorded in log 2. Update X in database 3. Update Y recorded in log 4. Transaction commit point 5. Force log to the disk 6. Update Y in database
FAILURE!• REDO database from log entries• No UNDO necessary because database has not been altered
FAILURE!• UNDO X
FAILURE!• REDO Y
FAILURE!• UNDO in reverse order to log• REDO in committed log order (using the write log entry)
Write-ahead Logging
28
Page Buffering Technique Data is not updated ‘in place’
The database is considered to be made up of a number of n fixed-size disk blocks or pages, for recovery purposes.
A page table with n entries is constructed where the ith page table entry points to the ith database page on disk.
The current page table points to most recent current database pages on disk
21
3456
Database data pages/blocks
Page table
page 3
page 2
page 4
page 1
page 5
page 6
29
Paging Technique – cont. When a transaction
begins executing the current page
table is copied into a buffer page table
buffer page table is then saved
buffer page table is never modified during transaction execution
write operations—new copy of database page is created and current page table entry modified to point to new disk page/block
21
3456
21
3456
Database data pages (blocks)
Current page tableAfter updating pages 2,6
Buffer page table (not updated)
page 5 (old)
page 1
page 4
page 2 (old)
page 3
page 6
page 2 (new)
page 5 (new)
30
Paging Technique - final To recover from a failure
check the state of the database (before transaction execution) through the buffer page table
free modified pages discard current page table Recover state by reinstating
the buffer page table to become the current page table once more
Commit a transaction discard previous buffer page free old referenced page
tables Garbage collection
21
3456
21
3456
Database data pages (blocks)
Current page tableAfter updating pages 2,6
Buffer page table (not updated)
page 5 (old)
page 1
page 4
page 2 (old)
page 3
page 6
page 2 (new)
page 5 (new)