网络操作系统 - Linux
第三章 Linux 常规配置
网络配置 配置本机 IP 地址 配置本地其它网络信息 安装图形界面
共享配置 NFS 配置和使用 Samba 的配置和使用
网络配置 认识本地 IP 信息
网络配置
IP 配置信息 Vim /etc/network/interfaces
iface eth0 inet dhcp
网络配置
IP 配置信息 Vim /etc/network/interfaces
auto eth0address 192.168.0.88netmask 255.255.255.0gateway 192.168.0.1
网络配置
启动网络 ifconfig eth0 up / ifup ifconfig eth0 down / ifdown 重启服务
/etc/init.d/networking start|stop|restart service networking start|stop|restart
检查网络 ping ip_addr
网络配置
临时修改本地 IP 信息 ifconfig eth0 192.168.0.3/24 ifconfig eth0 hw either xx:xx:xx:xx:xx:xx ifconfig eth0 netmask 255.255.255.0 ifconfig eth0 broadcast 192.168.0.255 ifconfig eth0:0 …
网络配置
修改本地网络信息 - route 查看路由信息 route route add default gw 192.168.2.99 route del default gw
网络配置
修改 DNS 服务器 配置 DNS 服务器
vim /etc/resolv.conf nameserver 219.141.140.10
查看 DNS 信息 nslookup
网络配置
主机名 查看 hosts 临时修改
hostname newhostname 永久修改
vim /etc/hostname
图形界面的配置
图形界面概述 X 窗口系统 登录管理器
XDM / GDM / KDM 桌面环境和窗口管理器( GUI )
GNOME / KDE / XFCE
图形界面的配置
apt-get install x-window-system-core apt-get install xdm
备选 gdm 、 kdm apt-get install ubuntu-desktop
备选 kubuntu-desktop 、 xubuntu-desktop
图形界面的配置
图形界面的配置
图形界面的配置
Startx
图形界面的配置
图形界面的配置
图形界面的配置
图形界面的配置
图形界面的配置
图形界面的配置
图形界面的配置
安装和使用打印机 图形界面的安装位置
新打印机 -> print into PDF file->Generic -> PDF file generator
共享配置
共享类型 UNIX-Like & UNIX-LIKE Windows 访问 UNIX-LIKE UNIX-LIKE 访问 Windows
共享配置
NFS 的安装 RPC 类型的服务( portmap )
安装 apt-get install nfs-kernel-server (服务器端) apt-get install nfs-commmon (客户端)
共享配置 NFS 的配置
/etc/default/portmap vim dpkg-reconfigure portmap
/etc/hosts.deny
/etc/hosts.allow
### NFS DAEMONSportmap:ALL | 192.168.2.lockd:ALLmountd:ALLrquotad:ALLstatd:ALL
共享配置
NFS 的配置 /etc/exports
/home/zp/share 192.168.2.*(rw,sync,no_root_squash) /home/zp/share 192.168.2.0/24(rw,sync,no_root_squash)
exportfs -r 更新 exportfs 文件
重新启动服务 nfs-kernel-server
共享配置
NFS 的挂载 挂载
mount 192.168.2.1:/home/zp/share /mnt /home/zp/share 查看结果
df 释放
Umount [-f]
共享配置 Samba 的安装
已经安装
没有安装 apt-get install samba
共享配置 Samba 服务开启
查看服务的当前状态 /etc/init.d/samba status
开启或者关闭 /etc/init.d/samba stop|start|restart service samba stop|start|restart
状态查询 Smbstatus
访问一下试试看
共享配置 Samba 的配置
配置文件 /etc/samba/smb.conf
添加共享目录 [share] comment = Public path =/share/public/ browseable = yes guest ok = yes read only = no writeable = yes create mask = 0777 directory mask = 0777
共享配置
Samba 配置后出现的问题 无法写入和创建目录
修改共享文件夹的权限 chmod 777 /share
共享配置
从 Linux 访问 Windows 在 Windows 上创建共享文件夹 在 Linux 上创建链接的目标目录 smbmount //share/folder /mnt/samba Smbumount /mnt/samba
复活节彩蛋 超级牛力
apt-get -h apt-get moo apt-build moo
蛇吞象 aptitude -v moo aptitude -vv moo aptitude -vvv moo aptitude -vvvv moo aptitude -vvvvv moo aptitude -vvvvvv moo aptitude -vvvvvvv moo
系统设置
启动管理 默认启动字符界面 默认更改网卡信息
系统设置 时间日期设置
【时区】修改 /etc/localtime 的指向链接 【时间】
date -s MM/DD/YY date -s hh:mm /etc/init.d/hwclock.sh restart
系统设置
忘记密码怎么办? 启动时按 e 进入启动菜单列表 选择 recovery mode 按 e 选择 kernel 按 e ro single -> rw single init=/bin/bash 按 b 启动
Recommended