Download ppt - 電子產業的另一片藍海－測試驗證

9.(RF)

SAR()(RF)(2G2.5G3GWCDMA) OTA(Over The Air)

10M CHAMBER

Fully anechoic chamberGCF-PTCRB Test LabGCF-PTCRB Test LabGCF-PTCRB Test Lab

GCF-PTCRB Test LabRS/CS

SAR-HACGCF-PTCRB Test LabGCF-PTCRB Test Lab

Whats external Power Supply defined? Convert to only one output voltage at a time. Output power less than or equal to 250W or 250VA. Without any batteries or battery packs (including that are removable) attach directly to the Power Supply. Without any type selector switches or charge meters.10.

Introduction for International Members Energy Star

Effective date : November 1, 2008. Version 2.0 : Level V. Meet all criteria for Active Mode and No-Load Mode. Test Voltage / Frequency : 115V@60Hz and 230V@50Hz. Samples required for test : 3 units as the average values.

CEC (California Energy Commission) Effective date : July 1, 2008. CEC Tier II : Level IV. Meet all criteria for Active Mode and No-Load Mode. Test Voltage / Frequency : 115V@60Hz and 230V@50Hz. Samples required for test : 3 units as the average values.Introduction for International Members

MEPS (Minimum Energy Performance Standard) Effective date : Australia December 1, 2008. New Zealand April 1, 2009. Minimum Energy Performance Standards : mark III. High Efficiency Products : mark IV, mark V. Meet all criteria for Active Mode and No-Load Mode. Test Voltage / Frequency : only required at 230V@50Hz. Samples required for test : 3 units as the average values.Introduction for International Members

Energy Star 2.0 Testing Criteria

CEC Tier II Testing CriteriaNote : EISA (US Energy Independence and Security Act) as same as CEC. Effective date : July 1, 2008.

MEPS mark III Testing Criteria

MEPS mark IV Testing Criteria

MEPS mark V Testing Criteria

Label Marking Requirement Format : Roman numeral : III, IV or V. Font : Times Roman preferred (or other plain serif fonts). Size : Legible and indelible. Color : Text to contrast with the nameplate background.

Korea - MEPS (Minimum Energy Performance Standard)Additional Information Effective date : January 1, 2009. Scope : Single output and output power less than 150W. Note : Variable Output rating are not allowed, e.g. O/P : DC9-12V. Meet all criteria for On Mode and No-Load Mode. Test Voltage / Frequency : required at 220V@60Hz only.

Korea - MEPS Testing Criteria

Korea - Label Marking RequirementProduct to meet Minimum Power Consumption Efficiency. Voluntary, but Mandatory in Jan. 1, 2009.

Model Name.

Korea - MEPS Application Procedure Testing Fee : USD $750- per one model. Note : not include delivery fee. Lead Time : 2 weeks or shorter.

Summary Convert to only one output voltage at a time. Output power 250W ( 150W for Korea - MEPS). Without any batteries, battery packs or charging meters. Test Voltage : 115V@60Hz and 230V@50Hz. Note : ( Except for 220V@60Hz for Korea - MEPS). Criteria : Meet Energy Star 2.0 criteria to comply with all Energy Efficiency requirements. Whats required for Testing : 1) 3 samples; 2) Circuit Diagram (for Korea - MEPS); 3) Product Label Drawing.

Reference From : Energy Star

CEC (California Energy Commission) MEPS (Minimum Energy Performance Standard)http://www.energystar.govhttp://www.energyrating.gov.auhttp://www.energy.ca.gov

Reference From : Korea - MEPS (Minimum Energy Performance Standard)

http://www.kemco.or.kr/eng

Q&A

**(ATX Power Supply).250W..(ON/OFF), .*: 2008111.2.0: Level V..: 115V@60Hz, 230V@50Hz.: 3pcs.*: 200871.CEC Tier II: Level IV..: 115V@60Hz, 230V@50Hz.: 3pcs.*: 2008121; 200941.: Level V..: 230V@50Hz.: 3pcs.******1. , IV or V.2. Preferred Times Roman.3. .4. .*: 200911.: 150W..: 220V@60Hz.***: - $750 ().: 2 ().: 1) 3; 2) ; 3) ; 4) : a) ; b) .*(ATX Power Supply).250W..(ON/OFF), .*Energy Star http://www.energystar.govCEC http://www.energy.ca.govMEPS http://www.energyrating.gov.au*Korea - MEPS (Minimum Energy Performance Standard) - http://www.kemco.or.kr/eng

Download ppt - 電子產業的另一片藍海－ 測試驗證

Download ppt - 電子產業的另一片藍海－測試驗證