© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public 1Version 4.0
Planning and Cabling Networks
Network Fundamentals – Chapter 10
2© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
What will we do today?
Ch 09 Key Terms
Ch 10 terms
Presentation – Ch 10 and Cabling Networks
Build cross-over cable Google search - “How to make a crossover cable”
select - Littlewhitedog.com
Instructor Evaluations
3© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
What Will we Learn from Chapter 10?
To identify the basic network media required to make a LAN connection
To identify the types of connections for intermediate and end device connections in a LAN
– Identify the pin out configurations for straight-through and crossover cables
- Identify the different cabling types, standards and ports used for WAN connections
- Define the role of device management connections when using Cisco equipment
- To design an addressing scheme for an inter-network and assign ranges for hosts, network devices and the router interface
To Compare and contrast the importance of network designs
4© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection
Network Designscost
ports
speed
expandability/modular
Manageable
Cablesstraight-through
crossover
pin outs
Cabling backbone
Patch
Horizontal
Vertical
Cable making568a standard pin set
568b crossover pin set
RJ-45 Cat5 cable
Crimpers
Strippers
Cutters
5© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection
Select the appropriate hardware, including the cabling, to install several computers together in a LAN
6© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection
7© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Basic Network Media Required to Make a LAN Connection
8© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN
9© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN
10© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN
11© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
12© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN
13© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Types of Connections in a LAN
14© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Design an Addressing Scheme for an Internetwork
15© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Design an Addressing Scheme for an Internetwork
16© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs
17© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs
18© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs
19© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Importance of Network Designs
20© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
What Did I Learn from Chapter 10?
To identify the basic network media required to make a LAN connection
To identify the types of connections for intermediate and end device connections in a LAN
– Identify the pin out configurations for straight-through and crossover cables
- Identify the different cabling types, standards and ports used for WAN connections
- Define the role of device management connections when using Cisco equipment
- To design an addressing scheme for an inter-network and assign ranges for hosts, network devices and the router interface
To Compare and contrast the importance of network designs
21© 2007 Cisco Systems, Inc. All rights reserved. Cisco Public
Planning and Cabling NetworksNext
Configuring &Testing your Network