30

THE FIRST STEP TOWARDS A GOOD ENTRANCE STARTS OUTSIDE THE DOOR. STEP INTO ZONE 1, WHERE YOU ARE MET BY SCRAPER GRIDS THAT EFFECTIVELY CAPTURE DIRT AND SNOW AND KEEP THE ENTRANCE FREE FROM WATER AND ICE.

Scraper gridZ O N E 1

31

ZO N E 1

Kabex Special GridsThe Kabex Special Grid is a cantilevered, hardwearing, scraper grid for external use, made in hot-dip galvanised steel. The scraper grid is high-heel friendly and suitable in all entrances where you want an almost self-servicing, dirt collection function in a deeper recess. During the winter, the Kabex Special Grid makes an especially good combination with the Kabe Original entrance mat. Kabex Special Grids are also available with ribbed rubber scraper and anti-slip strips for improved dirt removal and protection against slipping.

W E I G H T Approximately 22 kg/m² (height 25 mm) for grid with steel profile. Approximately 24 kg/m² (height 25 mm) for grid with rubber profile.

M E S H D I S T A N C E43 x 5 mm (free opening).

S P A NMax. 800 mm in the B-direction (height 25 mm).

G R I D S I Z EMade to measure, max. size for a single piece 1480 x 1000 mm (A x B). To cover larger areas, the grid is divided into suitably sized sections. Standard size 25 mm is kept in stock, matching the stock Casting frames Kabe 25RS.

G R I D H E I G H T25 to 50 mm at intervals of 5 mm.

O P E N A R E A50%.

L O A D - B E A R I N G B A R SFlat bar 25 x 3 mm in the B-direction.

S C R A P E R S T R I P In punched steel profiles or, alternatively, with rubber scrapper strip for reduced risk of slipping.

R O U N D S T E E L4 mm.

S U R F A C E T R E A T M E N THot-dip galvanised according to SS-EN-ISO 1461.

T E C H N I C A L I N F O R M A T I O N

K A B E X S P E C I A L G R I D S

32

ZO N E 1

Kabex EM-gridThe Kabe EM-Grid is an entrance grid for small entrances or premises with requirements for good scraping ability and large permeability. Very suitable for environments where users wipe their feet. Kabe EM-Grids are not cantilevered and must be placed on a level, solid surface.

W E I G H T Approx. 16 kg/m².

M E S H D I S T A N C E35 x 12 mm (free opening).

G R I D S I Z EMade to measure, max. size for a single piece 1000 x 800 mm (A x B). Standard sizes are kept in stock, matching the stock Casting frames Kabe 25RS.

G R I D H E I G H T25 to 50 mm at intervals of 5 mm.

O P E N A R E A60%.

L O A D - B E A R I N G B A R SFlat bar 25 x 2 mm in the B-direction.

E D G E S T R I PFlat bar 25 x 2 mm.

S U R F A C E T R E A T M E N THot-dip galvanised according to SS-EN-ISO 1461.

T E C H N I C A L I N F O R M A T I O N

K A B E X E M - G R I D