Embed Size (px)
Citation preview
1 / 28
Quick Manual for our WIFI Smart Camera Form
(1)Remark before using our camera.
Please confirm whether the voltage meets the requirements before using the products, or
improper voltage will damage and bring security risk.
Please install the device correctly and make sure whether to disconnect the power supply at
the time of installation
The device will generate heat in the work, please avoid using in confined spaces
In order to prevent burns, do not touch the device after prolonged use.
Please use the camera function legally
(5V1A Power adaptor for our WIFI smart cameras)
Page 1: Remark something for our camera.
Page 1: how to download app
Page 2-3: product interface
Page 4:camera configuration
Page 5: User Login
Page 5-9: Camera setting
Page 9-22: Function show
Page 22-28: FAQ and other photos in there.
Download APP (1)EU APP: Scan the QR Code below to download and install. Or search“Smart life” ,this app camera has no any logo on the product(see the photo).without cloud storage.
2 / 28
(2)Other countries APP: Scan the QR Code below to download and install. “YI IoT”
this app camera has logo on the product.with cloud storage(you need to pay
extra for this).
*Some photos from real mobile phone app. (see the page26-28)
3 / 28
4 / 28
Camera configuration The camera,mobile phone and 2.4G WIFI router within 2M by the first setting,see the photo Confirm your WIFI router and your mobile phone WIFI,Both is working well. “913” is our WIFI router name.
5 / 28
User Login Open the app”Smart life” or “YI IoT”, choose the “login” (if you don’t have user name,please register it by the frist time,you must use your corrected email address or smart phone number)
Camera Setting This time, we will show the YI IoT app. (1)Open the YI IoT APP.
6 / 28
Face to Face. the camera lens will scan the mobile phone QR Code.The distance is 6inch or 15cm. It is better distance after testing many times.
7 / 28
Camera lens--------6inch or 15cm Mobile Phone QR Code.
8 / 28
9 / 28
Functions as below,(A,B,C,D,E)
10 / 28
A: More settings as below,
*Smart Camera Name:
11 / 28
* Smart Camera Setting:
Firmware Version for update.
Call mode‐‐
12 / 28
Firmware Version‐‐
* Settings
13 / 28
* Micro SD Card
*Info
14 / 28
* Connectivity
B: Floating window
15 / 28
C:Full Screen Preview
16 / 28
D: Alerts
17 / 28
E: Preview mode
18 / 28
* Share device
1 2
3 4
19 / 28
* Alerts
20 / 28
21 / 28
* Profile
22 / 28
FAQ
Q1:TFCardproblem?
A: You need to use good quality, C10 TF Card as the below one. Our device support MAX 64GB Photos; we use good quality for our each customers
23 / 28
24 / 28
And then you can use it for your camera.
Q2:Thecamerabeoffline,alwaysbuffering,andwecan’tconnectwithWIFIrouter,howtodo? A: 1.Check the Power and WIFI router if working well.
2.Keep the mobile phone ,wifi router and camera within 2m for setting.
3.Change to another mobile phone for setting.
4.Reset the camera,reconfigure the camera,see the Q3 photo
Q3:howtoswitchnewnetworkenvironment?A: Component description
In the new network environment,Reset Button Press and hold Reset for about 5 seconds. When
the horn sounds short voice, the reset is successful.
25 / 28
Q4:Directions APP and device firmware will have new update irregularly,you could upgrade it online at app
setting, instructions are for reference only.
How to update ,see the below photo *See the page 12.
26 / 28
(1) IOS
27 / 28
28 / 28
Android
