Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
ZJCZ.E159216
Flexible Cord
Flexible Cord
See General Information for Flexible Cord
SHENZHEN BAO HING ELECTRIC WIRE & CABLE MFR CO LTD E159216
BUCHONG TONGFUYU INDUSTRY AREA
SHAJING RD SHAJING ST
BAOAN DISTRICT
SHENZHEN, GUANGDONG 518104 CHINA
PVC parallel cord with -R suffix, Type SPT-2-R.
PVC jacketed cords with -R suffix, Types SVT-R, SJT-R.
Parallel cords, Types SPE-1, SPE-2, SPE-3, SPT-1, SPT-2, SPT-3, NISPT-1, NISPT-2, NISPE-1, NISPE-2.
Jacketed cords, Types SVE, SJE, SVT, SJT, ST, SJTW, STW.
Tinsel cords, Types TPT, TST.
Miscellaneous cord, Type Clock cord.
Single or Twisted Decorative Cord, Type CXTW.
Last Updated on 2011-03-30
Copyright □ 2011 Underwriters Laboratories Inc.®
The appearance of a company's name or product in this database does not in itself assure that products
so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the
UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for
the Mark on the product.
UL permits the reproduction of the material contained in the Online Certification Directory subject
to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be
presented in their entirety and in a non-misleading manner, without any manipulation of the data
(or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission
from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition,
the reprinted material must include a copyright notice in the following format: "Copyright © 2011
Underwriters Laboratories Inc.®"
NOTICE OF AUTHORIZATION TO APPLY THE UL MARK
This is an electronically generated letter. Signatures are not required for this document to be valid. Page 1 of 2
05/10/2010
Shenzhen Bao Hing Electric Wire & Cable Mfr Co Ltd Mr. Jiadong Luo Buchong Tongfuyu Industry Area Shajing Rd Shajing St Baoan District Shenzhen Guangdong 518104, Cn Our Reference: File E159216, Vol. 1 Project Number 10CA22625
Your Reference: MS. LUO ACCEPTED ON 30 APR 10
Project Scope: UL/CUL: TPE Flexible Cord, Types SVE, SVT, SJE, SJT, NISPE-1, NISPT-1 NISPE-2 and NISPT-2, 18 AWG conductor, may employ rayon yarns with 200-500 denier within copper conductor strands
Dear Mr. Jiadong Luo: UL's investigation of your product(s) has been completed under the above Reference Number and the product was determined to comply with the applicable requirements. This letter temporarily supplements the UL Follow-Up Services Procedure and serves as authorization to apply the UL Mark only at authorized factories under UL's Follow-Up Service Program. To provide the manufacturer with the intended authorization to use the UL Mark, the addressee must send a copy of this notice to each manufacturing location currently authorized in File E159216, Vol. 1. This authorization is effective from the date of this Notice and only for products at the indicated manufacturing locations. Records in the Follow-Up Services Procedure covering the product are now being prepared and will be sent in the near future. This letter authorizes application of the UL Mark for 90 days from the date of this letter. Products that bear the UL Mark shall be identical to those that were evaluated by UL and found to comply with UL’s requirements. If changes in construction are discovered, appropriate action will be taken for products not in conformance with UL’s requirements and continued use of the UL Mark may be withdrawn. UL may elect to withdraw use of the UL Mark if the Applicant or Manufacturer fails to comply with UL’s requirements including ongoing compliance of the product, under UL’s Follow-Up Service.
Notice of Authorization - 10CA22625
This is an electronically generated letter. Signatures are not required for this document to be valid. Page 2 of 2
Any information and documentation provided to you involving UL Mark services are provided on behalf of Underwriters Laboratories Inc. (UL) or any authorized licensee of UL. The contents of this Letter are intended solely for the use of UL and the Applicant. The opinions and findings of UL represent its judgment given with due consideration to the necessary limitations of practical operation in accordance with UL’s objectives and purposes. UL shall not otherwise be responsible for the use of or reliance upon the contents of this letter by anyone. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental, consequential or punitive damages, arising out of or in connection with the use or reliance upon the contents of this letter to anyone other than the Applicant as provided in the agreement between UL and Applicant. Any use or reference to UL’s name or certification mark(s) by anyone other than the Applicant in accordance with the agreement is prohibited without the express written approval of UL. Very truly yours, Reviewed by: Jacky Lam Dan Chan +852 2276 9296 +852 2276 9573 Engineer Project Engineer [email protected] [email protected] GUZCAE9-242C58
File E62405SP Vol 1 Auth. Page 1 Issued: 1982-01-06
Revised: 2012-12-06
FOLLOW-UP SERVICE PROCEDURE
(TYPE R)
UNLISTED COMPONENT
ATTACHMENT PLUGS, FUSELESS
(AXUT3,AXUT9)
Manufacturer: SEE ADDENDUM FOR MANUFACTURER LOCATIONS
68781 (Party Site)
Applicant: VOLEX (ASIA) PTE LTD
(337951-004) 35 TAMPINES ST 92
SINGAPORE 528880 SINGAPORE
This Follow-Up Service Procedure authorizes the above Manufacturer(s) to use the marking
specified by UL LLC, or any authorized licensee of UL LLC, including the UL Contracting
Party, only on products when constructed, tested and found to be in compliance with the
requirements of this Follow-Up Service Procedure and in accordance with the terms of the
applicable service agreement with UL Contracting Party and any applicable Service Terms. The
UL Contracting Party for Follow-Up Services is listed on addendum to this Follow-Up Service
Procedure ("UL Contracting Party"). UL Contracting Party and UL LLC are referred to jointly
herein as "UL."
UL further defines responsibilities, duties and requirements for both Manufacturers and UL
representatives in the document titled, "UL Mark Surveillance Requirements" that can be
located at the following web-site: http://www.ul.com/fus and in the document titled "UL and
Subscriber Responsibilities" that can be located at the following website:
http://www.ul.com/responsibilities. Manufacturers without Internet access may obtain the
current version of these documents from their local UL customer service representative or UL
field representative. For assistance, or to obtain a paper copy of these documents or the
applicable Service Terms, please contact UL's Customer Service at
http://www.ul.com/global/eng/pages/corporate/contactus, select a location and enter your
request, or call the number listed for that location.
The Applicant and the specified Manufacturer(s) in this Follow-Up Service Procedure must
agree to receive Follow-Up Services from UL Contracting Party. If your applicable agreement
is a Global Services Agreement ("GSA") with an effective date of January 1, 2012 or later
and this Follow-Up Service Procedure is issued on or after that effective date, the
Applicant and the specified Manufacturer(s) will be bound to a Service Agreement for Follow-
Up Services upon the earliest by any Subscriber of use of the prescribed UL Mark, acceptance
of the factory inspection, or payment of the Follow-Up Service fees which will incorporate
such GSA, this Follow-Up Service Procedure and the Follow-Up Service Terms which can be
accessed by clicking here: http://www.ul.com/contracts/Terms-After-12-31-2011. In all other
events, Follow-Up Services will be governed by and incorporate the terms of your applicable
service agreement and this Follow-Up Service Procedure.
File E62405SP Vol 1 Auth. Page 2 Issued: 1982-01-06
Revised: 2012-12-06
It is the responsibility of the Manufacturer to make sure that only the products meeting the
aforementioned requirements bear the authorized Marks of UL LLC, or any authorized licensee
of UL LLC.
This Follow-Up Service Procedure contains information for the use of the above
Manufacturer(s) and representatives of UL and is not to be used for any other purpose. It is
provided to the Manufacturer with the understanding that it will be returned upon request
and is not to be copied in whole or in part.
This Follow-Up Service Procedure, and any subsequent revisions, is the property of UL and is
not transferable. This Follow-Up Service Procedure contains confidential information for use
only by the above named Manufacturer(s) and representatives of UL and is not to be used for
any other purpose. It is provided to the Subscribers with the understanding that it is not
to be copied, either wholly or in part unless specifically allowed, and that it will be
returned to UL, upon request.
Capitalized terms used but not defined herein have the meanings set forth in the GSA and the
applicable Service Terms or any other applicable UL service agreement.
UL shall not incur any obligation or liability for any loss, expense or damages, including
incidental, consequential or punitive damages arising out of or in connection with the use
or reliance upon this Follow-Up Service Procedure to anyone other than the above
Manufacturer(s) as provided in the agreement between UL LLC or an authorized licensee of UL
LLC, including UL Contracting Party, and the Manufacturer(s).
UL LLC has signed below solely in its capacity as the accredited entity to indicate that
this Follow-Up Service Procedure is in compliance with the accreditation requirements.
William R. Carney
Director
North American Certification Program
File E62405SP Vol 1 Addendum To Page 1 Issued: 1982-01-06
Authorization Page Revised: 2012-12-06
LOCATION
433003 (Party Site)
(106395-001) VOLEX CABLE ASSEMBLY (SHENZHEN) CO LTD
VOLEX BLDG
1173 SHENHUI RD
BAO'AN, HENGGANG
SHENZHEN
GUANGDONG 518115 CHINA
Factory ID: SM or HG
UL Contracting Party for above site is: UL AG
31812 (Party Site)
(221809-001) P T VOLEX INDONESIA
KAWASAN INDUSTRI
SEKUPANG
BATAM RIAU
. INDONESIA
Factory ID: B
UL Contracting Party for above site is: UL AG
67739 (Party Site)
(342882-001) VOLEX CABLE ASSEMBLY (VIETNAM) CO LTD
D-5B THANG LONG INDUSTRIAL PARK
DONG AHH DISTRICT
HANOI VIET NAM
Factory ID: VH
UL Contracting Party for above site is: UL AG
171879 (Party Site)
(788163-001) VOLEX INTERCONNECT (INDIA) PVT LTD
22-1A 1ST ST
KHAZURA GARDEN
NEELANGARAI
CHENNAI TN 600041 INDIA
Factory ID: VC
UL Contracting Party for above site is: UL India Private Limited
File E62405SP Vol 1 Addendum To Page 2 Issued: 1982-01-06
Authorization Page Revised: 2012-12-06
LOCATION
200782 (Party Site)
(902299-002) VOLEX DE MEXICO S A
AVE 32 SUR NUM 8950
INTERIOR EDIFICIO G1, D, E, F
PARQUE INDUSTRIAL LA MESA, FRACC RUBIO
22650 TIJUANA
BC MEXICO
Factory ID: TI
UL Contracting Party for above site is: UL AG
196799 (Party Site)
(918517-001) VOLEX CABLE ASSEMBLY (ZHONGSHAN) CO
LTD
ZHONGSHAN TORCH HI TECH IND DEV ZONE
2 SINTA N ST
ZHONGSHAN
GUANGDONG 528437 CHINA
Factory ID: SM1 OR SMI
UL Contracting Party for above site is: UL AG
File E62405SP Vol. 1 Index Page 1 Issued: 1989-07-11
Revised: 2011-04-14
INDEX
ATTACHMENT PLUG:
Models Section Report Date
Unlisted component, Attachment-Plug Cap! Cat.
No.ME301.
1 1976-12-23
NEMA CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. USU CNU
ME301, -D, -
P, -S, -R, -
RP
1-15 20,18,17,16/2 7,10,10,13/125 2 1,1A Yes Yes
230619-001 1-15 18/2 5/125 2 1B Yes Yes
USJ15 1-15 18,16/2 7,10,13/125 2 1 Yes Yes
ME302, -B, -
P
1-15 18,17,16/2 10,12,13/125 2 2 Yes Yes
ME302GR 1-15 18,17,16/2 10,12,13/125 2 3 Yes Yes
US115LS, -
LPS, -S
1-15 18,16/2 10,13/125 2 4,6 Yes Yes
926 1-15 18,16,14/2 10,13,15/125 2 7 Yes Yes
926SR 1-15 18,16,14/2 10,13,15/125 2 Ill.13,14 Yes Yes
926NPSR 1-15 18,16,14/2 10,13,15/125 2 16 Yes Yes
926BSR 1-15 18,16,14/2 10,13,15/125 2 Ill.13,14,16 Yes Yes
DS15EPS2 1-15 18,17,16/2 10,12,13/125 2 21 Yes Yes
US115SC, -
PSC
1-15 18/2 7/125 3 16 Yes Yes
US15B, -P 1-15 18,16,14/2 10,13,15/125 2 4 Yes Yes
US15S2 1-15 18/2 10/125 2 Ill.17 Yes Yes
USJ15B 1-15 18/2 10/125 2 4 Yes Yes
MP128(EMI) 1-15 18/2 10/125 3 5 Yes Yes
VP129(EMI) 1-15 18/2 10/250 3 14 Yes Yes
US515SC(EMI) 5-15 16/3 13/125 3 21 Yes Yes
185, -F 5-15 18,16,14/3 10,13,15/125 2 -- Yes No
CX-490, -495 5-15 14,12,10/3 15,20,30/250 2 8 Yes No
3323(Hosp) 5-15 16,14/3 13,15/125 3 11,12 Yes Yes
3317 5-15 18,16/3 10,13/125 3 13 Yes Yes
AEC60(Hosp) 5-15 18,16,14,12/3 10,13,15,15/125 3 15 Yes Yes
PS204, -B, -
D
5-15 18,17,16,14/3 10,12,13,15/125 3 1 Yes Yes
PS204A 5-15 18,17,16,14/3 10,12,13,15/125 3 3 Yes Yes
US515A,
USI515A
5-15 18,16,14/3 10,13,15/125 3 17 Yes Yes
PS206 5-15 18,16,14/3 10,13,15/125 3 2 Yes Yes
PS206A -- 18,16 10,13 3 -- Yes Yes
PS515 5-15 18,16,14,12/3 10,13,15,20/125 3 10 Yes Yes
MP204 5-15 18,16,14/3 10,13,15,15/125 3 4 Yes Yes
USD15A, -
S15A
5-15 18,16/3 10,13/125 3 9 Yes Yes
PS520
5-20 18,16, 18,16,
14,12/314,12/3
10,13,
18,20/125
3 10 Yes Yes
File E62405SP Vol. 1 Index Page 1A Issued: 1989-07-11
Revised: 2012-11-11
ATTACHMENT PLUG: (Cont’d)
NEMA CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. USU CNU
1541 L5-20 18,16,14/3 10,13,15/125 3 20 Yes No
VS205A 6-15 18,16,14/3 10,13,15/250 3 8 Yes Yes
VS205S 6-15 18,16,14/3 10,13,15/250 3 Ill.55,56 Yes Yes
PS615 6-15 18,16,14,12/3 10,13,15,20/250 3 10 Yes Yes
PS620 6-20 18,16,14,12/3 10,13,18,20/250 3 10 Yes Yes
VS207A 6-20 14,12/3 15,20/250 3 6 Yes Yes
VS208A 6-30 12/3 25/250 3 7 Yes Yes
PL3001 1-15 18/2 10/125 3 23 Yes Yes
PL3007 1-15 14/3 15/125 3 -- Yes Yes
PS206A 5-15 18,16/3 10,13/125 3 24 Yes Yes
US650A, US650A
(A.C.1)
6-50 12/3 25/250 3 25,33 Yes Yes
US15S3 5-15 18/3 10/125 3 Ill.51 Yes Yes
MA115VPS2 1-15 18, 16/2 10,15/125 9 Ill.1 Yes Yes
USL620PS3 L6-20 14,12/3 15,20/250 3 26 Yes Yes
VPUS15S3 5-15 18,16/3 10,13/125 3 27 Yes Yes
US515NGA3, US515EGA3,
US515SGA3,
US515WGA3
5-15 18,16,14 10,13,15/125 3 28 YES YES
US515BTA3 5-15 18,16 10,13/125 3 29 YES YES
VPUS15DS3 5-15 18,16 10,13/125 3 - YES YES
US15GPS2 1-15 17,16 12,13/125 2 9 YES YES
USJ15TS3 5-15 18,16,14 10,13,15/125 3 30 YES YES
US115VPS2 1-15 18,17 10,12/125 2 13 YES YES
US115DPS2 1-15 17 12/125 2 10 YES YES
RA115GRP 1-15 18,17,16 10,12,13/125 2 11 YES YES
USL520PS3 L5-20 18,16,14,12 10,13,15,20/125 3 31 YES YES
PS520A 5-20 12 20/125 3 32 YES YES
US115VS2 1-15 18,17 10,12/125 2 12 YES YES
VPUS15S2 1-15 18/2 10/125 2 14 YES YES
USD15GPS2 1-15 18,17,16/2 10,12,13/125 2 15 YES YES
USD115PS2 1-15 17/2 12/125 2 16 YES YES
APUS15S3 5-15 18,16/3 10,13/125 3 34 YES YES
DS15PS2 1-15 18, 17, 16/2 10,12,13/125 2 17 YES YES
ME301SH 1-15 18 10/125 2 18 YES YES
APUS15S2 1-15 18/2 10/125 2 19 YES YES
US15PA2 1-15 18/2 10/125 2 20 YES YES
US520A3 5-20P 12/3 20/125 3 35,36 YES YES
US15TS2 1-15 18/2 10/125 2 22 YES YES
DS15JPS2 1-15P 18,17,16/2 10,12,13/125 2 23 YES YES
HO515S3 5-15P 16/3 13/125 3 37 YES -
MFUS15S2 1-15 18/2 2.5,7/125 2 24 YES YES
Note: (A.C.1) – ALTERNATE CONSTRUCTION NO. 1.
File E62405SP Vol. 1 Index Page 1B Issued: 1989-07-11
Revised: 2012-11-07
IEC CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. USU CNU
PS25A C14 18/3 10/250 5 1 YES YES
PS25 C14 18/3 10/250 5 2 YES YES
SSD10A C14 18,16/3 10,13/250 5 3 YES YES
3318-M3 C14 18,16/3 10,13/250 5 4 YES YES
3321A,-B C14 18,16/3 10,13/250 5 4 YES YES
3322A,-B C14 18,16/3 10,13/250 5 4 YES YES
APC14 C14 18/3 10/250 5 6 YES YES
VAC14A,-S C14 18/3 10/250 5 9 YES YES
VAC14BS C14 16/3 13/250 5 9 YES YES
VAC14LS C14 16/3 10,13/125 or 250 5 Ill.32 YES YES
14/3 15,16/125 or 250
94110/2 EuroPlug 18/2 2.5/250 5 5 YES YES
201492-1 C14/C7(2) 18/2 7/250 5 7,8 YES YES
VSC20 C20 16,14,12/3 13,16,20/250 5 10 YES YES
PL3004 C14 16/3 13/125 or 250 5 11 YES YES
VAC20S C20 16,14/3 13,16/125 or 250 5 12 YES YES
VAC20A C20 16,14/3 13,15,16/125 or 250 5 20 YES YES
VAC14KC C14 18,16/3 10,13/125 or 250 5 21 YES YES
VAC20KC C20 14/3 16/125 or 250 5 22 YES YES
VAC20BS C20 12/3 20/125 or 250 5 23 YES YES
VAC14LA C14 18,16,14/3 10,13,15/125 or 250 5 24 YES YES
VAC20AD C20 14,12/3 16,20/125 or 250 5 25 YES YES
VAC14KAL C14 18,16/3 10,13/125 or 250 5 26 YES YES
VAC14KAR C14 18,16/3 10,13/125 or 250 5 27 YES YES
VAC20KAR C20 16,14,14/3 13,15,16/125 or 250 5 28 YES YES
VAC20KAL C20 16,14,14/3 13,15,16/125 or 250 5 29 YES YES
SMC14LA C14 18,16/3 10,13/125 or 250 5 30 YES YES
File E62405SP Vol. 1 Index Page 2 Issued: 1989-07-11
Revised: 2013-02-06
CORD CONNECTOR BODIES:
NEMA CONFIGURATION
Cat. No.
Config
. Cord AWG Electrical A/V Sec. Fig. CUL
US115RPS 1-15 18/2 10/125 7 1 Yes
US515RP 5-15 18/3 10/125 7 2 Yes
US515RS,
US515RS(A.C.1) 5-15 18,16,14/3 10,13,15/125 4 30,51 Yes
AEC-212, AEC-202,-
210, 5-15 18,16,14/3 10,13,15/125 4 32 Yes
28-9170 1-15 18,16,14/3 10,13,15/125 4 32 Yes
CN-4008 5-15 16, 14/3 13,15/125 4 38 Yes
PH-161 1-15 18,16,14/2 10,13,15/125 4 44,45,
46 No
US515RP-A 5-15 18/3 10/125 7 3 Yes
Note: (A.C.1) – ALTERNATE CONTRUCTION NO. 1.
IEC CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. CUL
PS625,-A,-LA C13 18,16,14/3 10,13,15/125 4 1 Yes
PS309,-P C1 18/2 7/125 4 2 Yes
V1625,M1625, C13 18,16/3 10,13/125 or 250 4 3,3A,3
C Yes
VIC13A
V1625BS
C13 16,14,14/3 13,15,16/125 or 250 4 3B Yes
VAC13KS C13
18/3
16/3 14/3
10/125 or 250
13/125 or 250 15/125 or 250
4 3D Yes
M1250A,-P C7 18/2 7/250 4 4 Yes
M1250R C7 18/2 7/250 4 4A Yes
MS212,-A C9 18/2 10/125 4 5 Yes
MS225 C17 18/2 10/125 4 6 Yes
VAC17S,-BS C17 18,16,14/2 10,13,15/125 4 6A Yes
PIC17BS C17 14/2 15/125 4 6B Yes
YAC17S, PIC17S C17 18/2 10/125 4 6A Yes
VAC17A C17 16/2 10,13/125 4 6C Yes
M2825 C15,
C15A 18,16/3 10,15(HPN)/125 4 7 Yes
VAC15A C15 16,14/3 13, 16/125 or 250 4 52 Yes
VAC15S C15 18,16,14/3 10,13,15/250 (HPN) 4 7 Yes
VAC15BS C15 18,16,14/3 10,13,15/250 4 7 Yes
18 10/125 (SJ)
25AC5, 25ARAC5 C5 18/3 2.5,7/125 or 250 4 8 Yes
VAC5S,-AL,-AR C5 18/3 2.5,7/125 or 250 4 8 Yes
V1625LA C13 18,16,14/3 10,13,15/125 or 250 4 9 Yes
V1625A C13 18,16/3 10,13/125 or 250 4 9 Yes
V1625BA C13 16,14/3 13,15/125 or 250 4 9A Yes
File E62405SP Vol. 1 Index Page 2A Issued: 1989-07-11
Revised: 2013-03-13
CORD CONNECTOR BODIES CON’T:
IEC CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. CUL
AVLC13 C13 18,16,14,14/3 10,13,15,16/125 or 250
4 9B Yes
AVRC13 C13 18,16,14/3
10,13,15/125 or
250 4 9B Yes
3318-F3 C13 18,16/3 10,13/125 4 10 Yes
3319A,-B C13 18,16/3 10,13/125 4 10 Yes
3320A,-B C13 18,16/3 10,13/125 4 10 Yes
VSC15,VRC15,VLC15 C15 18,17,16,14/3 10,10,13,15/250 4 11 Yes
VSC13,VRC13,VLC13 C13 18,17,16,14/3 10,10,13,15/250 4 11 Yes
VSCC13 C13 18/3 10/250 4 11A Yes
VSC19,VRC19,VLC19 C19 18,16,14,12/3 10,13,16,20/250 4 12 Yes
VSCC19 C19 18,16,14,12/3 10,13,16,20/250 4 -- Yes
8393 Spec. 18/3 10/125 4 13 Yes
HS10S,-U C13 18,16/3 10,13/250 4 14 Yes
HS10A,-U C13 18,16/3 10,13/250 4 15 Yes
Z357316 C17 18/2 10/125 4 -- Yes
Z357318 C13 18/2 10/250 4 16 Yes
16SCI C19 16/3 13/250 4 17 Yes
AP19M18 C19 14/3 15/125 8 1 Yes
APC13 C13 18,16/3 10,13/250 4 18 Yes
APC13S C13 18/3 10/250 4 31 Yes
APC5A C5 18/3 10/125 4 19 Yes
APC5M C5 18/2 10/125 4 20 Yes
APC7M C7 18/2 2.5/125 4 29 Yes
APC5S, -5SM C5 18/3 10/125 4 21 Yes
VAC7PS C7 18/2 7/125 4 23 Yes
VAC7S, SZC7S C7 18/2 2.5,7/125 or 250 4 23 Yes
VAC7A C7 18/2 7/125 4 24 Yes
APC7S C7 18/2 2.5/125 or 250 4 25 Yes
APC7Q C7 18/3(Functional Ground)
2.5/125 4 35 Yes
VAC19 C19 16,14,12/3 13,15,20/250 4 26 Yes
*VAC19A, VAC19LA C19 16,14,12/3 13,15,20/125 or 250
4 65 Yes
APC5SP, -SF C5 18/3 2.5/250 4 27 Yes
CN-4001 C17 18/2 10/125 4 28 Yes
CN-4002 C13(Special Use)
16/3 13/125 or 250 4 36 Yes
APC13F C13(Special Use)
18,16/3 10,13/125 4 37 Yes
APC13G C13(Special Use)
18/3 10/125 or 250 4 39 Yes
APC13H C13(Special
Use) 18/3 10/125 or 250 4 53 Yes
DLC7U2 C7 18/2 2.5/125 4 - Yes
DLC5U3 C5 18 2.5/125 4 - Yes
AP7M16 C7 18 2.5/125 4 - Yes
APC13FH C13(Special
Use) 16/3 13/125 4 62 Yes
File E62405SP Vol. 1 Index Page 2B Issued: 1989-07-11
Revised: 2013-12-30
CORD CONNECTOR BODIES CON’T:
IEC CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. CUL
VCC13 C13 18/3 10/125 4 40 Yes
VAC19KS C19 14, 14,12/3 15,16,20/125 or 250
4 41 Yes
SOC7S C7 18/2 7/125 4 42 Yes
APC13GH C13 18/3 10/125 4 43 Yes
HPC13A C13 18,16/3 10,13/250 4 47 Yes
DLC7E2 C7 18/2 2.5/125 4 48 Yes
DLC5E3 C5 18/3 2.5/125 4 49 Yes
V1625AT C13 18/3 10/250 4 50 Yes
VCC7S C7 18/2 3,7/125 or 250 4 54 Yes
VCC5S C5 18/3 2.5/125 or 250 4 55 Yes
APC7H C7 18/3(Functional Ground)
2.5/125 4 56 Yes
VCC5AR C5 18/3 2.5/125 or 250 4 57 Yes
VCC13A C13 18/3 10/125 or 250 4 58 Yes
V1625H C13 18,16/3 10,13/125 or 250 4 59 Yes
VAC19H C19 14,14,12/3 15,16,20/125 or 250
4 60 Yes
APC7K C7 18/2 2.5/125 4 61 Yes
VCC7 C7 18/2 7/125 or 250 4 63 Yes
HOC13S C13 16/3 13/125 or 250 4 64 Yes
VAC17KS C17 18/2 10/125 or 250 4 66 Yes APC7KC C7 18/2 2.5/125 10 1 Yes
APC13HC C13 18/3 10/125 10 2 Yes
MFC7S C7 18/2 2.5/125 10 3 Yes
APC13HJ C13 18/3 10/125 10 4 Yes
File E62405SP Vol. 1 Index Page 3 Issued: 1989-07-11
Revised: 2010-09-08
NONSTANDARD CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. CUL
PHX-949 N/A 18,17/2 10,10/125 4 22 Yes
SR5008 N/A 16/3 13/125 4 33 Yes
DLC5A3 N/A 18/3 2.5/125 4 34 Yes
DLC5SA3 N/A 18/3 2.5/125 4 34A Yes
CORD SPLICES:
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. CUL
497-0420299 N/A 18,16/3 10,13/125 6 1,3 Yes
7594 N/A 18,16,14/3 10,13,15/250 6 2 Yes
Duo-Cord N/A 18,16,14/3 10,13,16/125 or 250 6 4 Yes
DUO-CORD-B N/A 14/3 16/125 or 250 6 6 Yes
Trident N/A 18,16,14/3 10,10,10/250 6 5 Yes
File E62405SP Vol 3 Auth. Page 1 Issued: 2000-01-05
Revised: 2012-03-06
FOLLOW-UP SERVICE PROCEDURE
(TYPE R)
UNLISTED COMPONENT
ATTACHMENT PLUGS, FUSELESS
(AXUT3)
Manufacturer: SEE ADDENDUM FOR MANUFACTURER LOCATIONS
68781 (Party Site)
Applicant: VOLEX (ASIA) PTE LTD
(337951-004) 35 TAMPINES ST 92
SINGAPORE 528880 SINGAPORE
This Follow-Up Service Procedure authorizes the above Manufacturer(s) to use the marking
specified by UL LLC, or any authorized licensee of UL LLC, including the UL Contracting
Party, only on products when constructed, tested and found to be in compliance with the
requirements of this Follow-Up Service Procedure and in accordance with the terms of the
applicable service agreement with UL Contracting Party and any applicable Service Terms. The
UL Contracting Party for Follow-Up Services is listed on addendum to this Follow-Up Service
Procedure ("UL Contracting Party"). UL Contracting Party and UL LLC are referred to jointly
herein as "UL."
UL further defines responsibilities, duties and requirements for both Manufacturers and UL
representatives in the document titled, "UL Mark Surveillance Requirements" that can be
located at the following web-site: http://www.ul.com/fus and in the document titled "UL and
Subscriber Responsibilities" that can be located at the following website:
http://www.ul.com/responsibilities. Manufacturers without Internet access may obtain the
current version of these documents from their local UL customer service representative or UL
field representative. For assistance, or to obtain a paper copy of these documents or the
applicable Service Terms, please contact UL's Customer Service at
http://www.ul.com/global/eng/pages/corporate/contactus, select a location and enter your
request, or call the number listed for that location.
The Applicant and the specified Manufacturer(s) in this Follow-Up Service Procedure must
agree to receive Follow-Up Services from UL Contracting Party. If your applicable agreement
is a Global Services Agreement ("GSA") with an effective date of January 1, 2012 or later
and this Follow-Up Service Procedure is issued on or after that effective date, the
Applicant and the specified Manufacturer(s) will be bound to a Service Agreement for Follow-
Up Services upon the earliest by any Subscriber of use of the prescribed UL Mark, acceptance
of the factory inspection, or payment of the Follow-Up Service fees which will incorporate
such GSA, this Follow-Up Service Procedure and the Follow-Up Service Terms which can be
accessed by clicking here: http://www.ul.com/contracts/Terms-After-12-31-2011. In all other
events, Follow-Up Services will be governed by and incorporate the terms of your applicable
service agreement and this Follow-Up Service Procedure.
File E62405SP Vol 3 Auth. Page 2 Issued: 2000-01-05
Revised: 2012-03-06
It is the responsibility of the Manufacturer to make sure that only the products meeting the
aforementioned requirements bear the authorized Marks of UL LLC, or any authorized licensee
of UL LLC.
This Follow-Up Service Procedure contains information for the use of the above
Manufacturer(s) and representatives of UL and is not to be used for any other purpose. It is
provided to the Manufacturer with the understanding that it will be returned upon request
and is not to be copied in whole or in part.
This Follow-Up Service Procedure, and any subsequent revisions, is the property of UL and is
not transferable. This Follow-Up Service Procedure contains confidential information for use
only by the above named Manufacturer(s) and representatives of UL and is not to be used for
any other purpose. It is provided to the Subscribers with the understanding that it is not
to be copied, either wholly or in part unless specifically allowed, and that it will be
returned to UL, upon request.
Capitalized terms used but not defined herein have the meanings set forth in the GSA and the
applicable Service Terms or any other applicable UL service agreement.
UL shall not incur any obligation or liability for any loss, expense or damages, including
incidental, consequential or punitive damages arising out of or in connection with the use
or reliance upon this Follow-Up Service Procedure to anyone other than the above
Manufacturer(s) as provided in the agreement between UL LLC or an authorized licensee of UL
LLC, including UL Contracting Party, and the Manufacturer(s).
UL LLC has signed below solely in its capacity as the accredited entity to indicate that
this Follow-Up Service Procedure is in compliance with the accreditation requirements.
William R. Carney
Director
North American Certification Program
File E62405SP Vol 3 Addendum To Page 1 Issued: 2000-01-05
Authorization Page Revised: 2012-03-06
LOCATION
433003 (Party Site)
(106395-001) VOLEX CABLE ASSEMBLY (SHENZHEN) CO LTD
VOLEX BLDG
1173 SHENHUI RD
BAO'AN, HENGGANG
SHENZHEN
GUANGDONG 518115 CHINA
Factory ID: SM OR HG
UL Contracting Party for above site is: UL AG
31812 (Party Site)
(221809-001) P T VOLEX INDONESIA
KAWASAN INDUSTRI
SEKUPANG
BATAM RIAU
. INDONESIA
Factory ID: B
UL Contracting Party for above site is: UL AG
67739 (Party Site)
(342882-001) VOLEX CABLE ASSEMBLY (VIETNAM) CO LTD
D-5B THANG LONG INDUSTRIAL PARK
DONG AHH DISTRICT
HANOI VIET NAM
Factory ID: VH
UL Contracting Party for above site is: UL AG
171879 (Party Site)
(788163-001) VOLEX INTERCONNECT (INDIA) PVT LTD
22-1A 1ST ST
KHAZURA GARDEN
NEELANGARAI
CHENNAI TN 600041 INDIA
Factory ID: VC
UL Contracting Party for above site is: UL India Private Limited
File E62405SP Vol 3 Addendum To Page 2 Issued: 2000-01-05
Authorization Page Revised: 2012-03-06
LOCATION
196799 (Party Site)
(918517-001) VOLEX CABLE ASSEMBLY (ZHONGSHAN) CO
LTD
ZHONGSHAN TORCH HI TECH IND DEV ZONE
2 SINTA N ST
ZHONGSHAN
GUANGDONG 528437 CHINA
Factory ID: SM1 OR SMI
UL Contracting Party for above site is: UL AG
File E62405SP Vol. 3 Index Page 1 Issued: 2000-01-05
Revised: 2003-07-23
ATTACHMENT PLUG CAPS:
NEMA CONFIGURATION
Belden
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
AEC-P19 1-15 18,17/2 10,12/125 1 1 NO 02-02-90
AEC-P19CH 1-15 18,17/2 10,12/125 1 1 NO 02-02-90
AEC-20 1-15 18,16,14/2 10,13,15/125 1 2 NO 12-23-76
AEC-20P 1-15 18,16,14/2 10,13,15/125 1 2 NO 12-23-76
AEC-21 1-15 18,16,14/2 10,13,15/125 1 3 NO 02-02-90
AEC-21P 1-15 18,16,14/2 10,13,15/125 1 3 NO 02-02-90
AEC-22 1-15 18,16,14/2 10,13,15/125 1 4 NO 12-23-76
AEC-22CH 1-15 18,16,14/2 10,13,15/125 1 4 NO 12-23-76
AEC-22R-4 1-15 18,16,14/2 10,13,15/125 1 4 NO 12-23-76
AEC-22PR1 1-15 18,16,14/2 10,13,15/125 1 4 NO 12-23-76
AEC-22PR2 1-15 18,16,14/2 10,13,15/125 1 4 NO 12-23-76
AEC-22PR3 1-15 18,16,14/2 10,13,15/125 1 4 NO 12-23-76
AEC-23 1-15 18,16,14/2 10,13,15/125 1 5 NO 12-23-76
AEC-23P 1-15 18,16,14/2 10,13,15/125 1 5 NO 12-23-76
AEC-26 2-20 14,12 18,20/250 1 6 NO 02-20-87
AEC-27, -27P 1-15 18,16,14 10,13,15/125 1 7 NO 10-17-86
AEC-28 1-15 18,16,14/2 10,13,15/125 1 8 NO 03-22-76
AEC-29 1-15 18,16,14/2 10,13,15/125 1 9 NO 03-22-76
AEC-30 5-15 18,16,14 10,13,15/125 1 10 NO 09-19-75
AEC-30CH 5-15 18,16,14 10,13,15/125 1 10 NO 09-19-75
AEC-31 5-15 18,16,14,12 10,13,15,15/125 1 11 NO 09-19-75
AEC-32 6-15 18,16,14 10,13,15/250 1 12 NO 09-19-75
AEC-33 7-15 18,16,14,12 10,13,15,15/277 1 12A NO 09-19-75
AEC-34 6-20 18,16,14,12 10,13,15,20/125 1 -- NO 03-26-76
AEC-35 5-20 18,16,14,12 10,13,15,20/250 1 12B NO 03-29-76
AEC-36 5-15 14,12 15,15/125 1 13 NO 07-25-88
AEC-38 5-15 18,16,14 10,13,15/125 1 10 NO 09-19-75
AEC-38CH 5-15 18,16,14 10,13,15/125 1 10 NO 09-19-75
AEC-40-NB 5-15 18,16,14,12 10,13,15,15/125 1 14 NO 03-22-76
AEC-40-S 5-15 18,16,14,12 10,13,15,15/125 1 14 NO 03-22-76
AEC-41-N 6-15 18,16,14,12 10,13,15,15/250 1 14 NO 03-22-76
AEC-42-SFP 7-15 18,16,14,12 10,13,15,15/277 1 14 NO 03-22-76
AEC-43-N 5-20 18,16,14,12 10,13,15,20/125 1 14 NO 03-22-76
AEC-44-E 6-20 18,16,14,12 10,13,15,20/250 1 14 NO 03-22-76
AEC-45 5-15 18,16,14,12 10,13,15,15/125 1 15 NO 03-22-76
*AEC-50WB 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50W 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50NB 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50N 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50-1WB 1-15 18,16,14,12 13/125 1 16 NO 03-25-98
*AEC-50-1W 1-15 18,16,14,12 13/125 1 16 NO 03-25-98
*AEC-50-1NB 1-15 18,16,14,12 13/125 1 16 NO 03-25-98
*AEC-50-1N 1-15 18,16,14,12 13/125 1 16 NO 03-25-98
*AEC-50-1SB 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50-1S 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50-1EB 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
*AEC-50-1E 5-15 18,16,14,12 10/125 1 16 NO 03-25-98
File E62405SP Vol. 3 Index Page 2 Issued: 2000-01-05
Revised: 2008-10-22
ATTACHMENT PLUG CAPS:
NEMA CONFIGURATION
Belden
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
AEC-60(H) 5-15 18,16,14,12 10,13,15,15/125 1 17 YES 05-14-85
AEC-61(H) 6-15 18,16,14,12 10,13,15,15/250 1 17 YES 05-14-85
AEC-62(H) 5-20 18,16,14,12 10,13,15,20/125 1 17 YES 05-14-85
AEC-63(H) 6-20 18,16,14,12 10,13,15,20/250 1 17 YES 05-14-85
AP2-1 1-15 18,16,14/2 10,13,15/125 1 18 NO 04-01-86
AP2-1P 1-15 18,16,14/2 10,13,15/125 1 19 NO 05-08-86
AP2-2 1-15 14/2 13/125 1 20 NO 04-04-86
AP3-1 5-15 18,16/3 10,13/125 1 21 NO 04-02-86
AP3-1BT 5-15 18,16 10,13/125 1 22 NO 04-02-86
AP3-2 5-15 18,16 10,13/125 1 23 NO 04-02-86
AP3-3 5-15 18,16 10,13/125 1 24 NO 04-02-86
AP3-4 5-20 16,14,12 13,15,20/125 1 25 NO 04-03-86
AP3-5 5-15 18,16 10,13/125 1 29 NO 04-02-86
AP3-6 5-15 16,14,12 13,15,15/125 1 26 NO 04-03-86
AP3-7 6-15 16,14,12 13,15,15/250 1 27 NO 04-03-86
AP3-8 6-20 16,14,12 13,15,20/125 1 28 NO 04-03-86
BI-5204 5-15 18 10/125 1 30 NO 04-05-88
CH12975 5-15 4250AWM 0.4/125 1 31 NO 08-20-93
CX-11 5-15 18,16 10,13/125 1 32 NO 11-26-84
CX-91AN 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-91BN 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-91C 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-91DN 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-91E 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-91FN 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-91S 5-15 18,16,14 10,13,15/125 1 33 NO 11-26-84
CX-92 5-15 18,16,14 10,13,15/125 1 34 NO 11-26-84
CX-94 5-15 18 10/125 1 35 NO 11-26-84
CX-130 1-15 18,16/2 10,13/125 1 36 NO 11-23-84
CX-140 5-15 18,16,14 10,13,15/125 1 37 NO 11-26-84
CX-170-A 1-15 18,16/2 10,13/125 1 38 NO 11-30-84
CX-170NN 1-15 18,16/2 10,13/125 1 38 NO 11-30-84
CX-290 1-15 18,16 10,13/125 1 39 NO 11-30-84
CX-391 6-15 18,16,14,12 10,13,15,15/250 1 40 NO 12-04-84
CX-391-S 6-15 18,16,14,12 10,13,15,15/250 1 40 NO 12-04-84
CX-392 5-20 18,16,14,12 10,13,15,15/125 1 40 NO 12-04-84
CX-393 6-20 18,16,14,12 10,13,15,15/250 1 40 NO 12-04-84
*CX-394S 7-20 14,12 15,20/277 1 41 NO 12-04-84
*CX-394N 7-20 14,12 15,20/277 1 41 NO 12-04-84
CX-395 5-15 18,16,14,12 10,13,15,15/125 1 42 NO 01-25-95
CX-396 5-15 18,16,14,12 10,13,15,15/125 1 42 NO 01-25-95
CX-397 6-15 18,16,14,12 10,13,15,15/250 1 42 NO 01-25-95
CX-399 7-15 18,16,14,12 10,13,15,15/277 1 42 NO 01-25-95
CX-485 6-30 12,10 15,15/250 1 43 NO 12-05-84
CX-490 6-50 12,10,8 15,15,15/125 1 44 NO 11-27-84
CX-495 6-50 12,10,8 25,30,40/125,250 1 -- NO 11-27-84
DR3 10-30 10 30/250 1 45 NO 11-22-84
File E62405SP Vol. 3 Index Page 3 Issued: 2000-01-05
Revised: 2009-04-24
ATTACHMENT PLUG CAPS:
NEMA CONFIGURATION
Belden Models Config. Cord AWG A / V Sec. Fig. CUL Issued ECC-102 1-15 18,16/2 10,13/125 1 47 NO 11-23-84
ECC-103 1-15 18,16/2 10,13/125 1 47 NO 11-23-84 KM2P 5-15 18,16 10,13/125 1 48 NO 11-27-79 KM-2L3 6-15 18,16 10,13/250 1 49 NO 11-27-79
*
* * KM5D 10-30 10 30/125,250 1 51 NO 08-26-82 PL1030P 10-30 10/3 30/125,250 1 - NO PL1050P 10-50 8/2,10/1 40/125,250
6/2,8/1 50/125, 250 1 - NO PL1430P 10-30 10/4 30/125,250 1 - NO PL1450P 14-50 8/2,10/2 40/125,250
6/2,8/2 50/125, 250 1 - NO KM5E 14-30 10 30/125,250 1 51 NO 08-26-82 KM5F 7-30 12,10 25,30/277 1 50 NO 10-27-81
KM-8 1-15 18,16/2 10,13/125 1 52 NO 05-23-80 KM-8A 1-15 18,16/2 10,13/125 1 52 NO 05-23-80 KM-9 6-20 18,16,14,12 10,13,15, 20/250 1 53 NO 11-27-79
KM-9A 5-20 18,16,14,12 10,13,15, 20/250 1 53 NO 11-27-79
KM-11 5-15 18,16 10,13/125 1 54 NO 02-26-80 PH-22 1-15 16 13/125 1 55 NO 06-27-66
PH-43 5-15 16,14 13,15/125 1 56 NO 06-27-66 PH-44 6-15 18,16,14 10,13,15/250 1 57 NO 06-27-66 PH-44B 1-15 18,16,14 10,13,15/125 1 57 NO 06-27-66
PHC-44C 1-15 18,16,14 10,13,15/125 1 57 NO 06-27-66 PHC-44D 1-15 18,16,14 10,13,15/125 1 57 NO 06-27-66 PH-50 6-15 16,14 13,15/125 1 58 NO 06-27-66
PHF133-SN 1-15 27,20,18,16 2,2,10,13/125 1 59 NO 06-27-66 PH-173 5-15 18,16,14,12 10,13,15,15/125 1 60 NO 06-27-66 PH-173A 5-15 18,16,14,12 10,13,15,15/125 1 60 NO 06-27-66
PH-185 5-15 18,16,14 10,13,15/125 1 61 NO 06-27-66 PH-185F 5-15 18,16,14 10,13,15/125 1 61 NO 06-27-66 PHF-190 10-20 27,20 2,2.5/250 1 62 NO 06-27-66
PH-290A 5-15 18,16,14/3 10,13,15/125 1 63 NO 06-27-66
PH-290B 5-15 18,16,14/3 10,13,15/125 1 63 NO 06-27-66 PH-290D 5-15 18,16,14/3 10,13,15/125 1 63 NO
PH-290G 5-15 18,16,14/3 10,14,15/125 1 63 NO PH-290M 5-15 18,16,14/3 10,13,15/125 1 63 NO 06-27-66 PH-290N 5-15 18,16,14/3 10,13,15/125 1 63 NO 06-27-66
PH-290-O 5-15 18,17,16,14/3 10,10,13,15/125 1 63 NO PH-290P 5-15 18,16,14/3 10,13,15/125 1 63 NO 06-27-66 PH-290J 5-15 18,16,14 10,13,15/125 1 64 NO 06-27-66
PH-304 5-20 12 20/125 1 66 NO 06-27-66 PH-306 6-20 12 20/250 1 66 NO 06-27-66 PH-305 6-15 18,16,14 10,13,15/250 1 65 NO 06-27-66
PH-309 5-15 18,16,14 10,13,15/125 1 67 NO 06-27-66 PHC-309A 5-15 18,16,14 10,13,15/125 1 67 NO 06-27-66 PH-312A 6-30 10 30/250 1 68 NO 05-19-66
PH-312B 6-30 10 30/250 1 69 NO 05-19-66 PH-313 6-50 6 50/250 1 70 NO 06-27-66
File E62405SP Vol. 3 Index Page 4 Issued: 2000-01-05
Revised: 2007-05-21
ATTACHMENT PLUG CAPS:
NEMA CONFIGURATION
Belden Models Config. Cord AWG A / V Sec. Fig. CUL Issued PH-313B 6-50 6 50-250 1 70 NO 06-27-66
PH-347A 5-20 18,16,14,12 10,13,15,20/125 1 71 NO 06-27-66 PH-347B 6-20 18,16,14,12 10,13,15,20/250 1 71 NO 06-27-66 PH-347C 6-15 18,16,14,12 10,13,15,15/250 1 71 NO 06-27-66
PH-347D 5-15 18,16,14 10,13,15/125 1 71 NO 03-28-73 PH-347G 6-15 18,16,14 10,13,15/250 1 71 NO 03-28-73
PH-347F 1-15 18,16,14 10,13,15/125 1 71 NO 03-28-73
PH-615 14-30 10 30/125 1 72 NO 06-07-73 PH-616 14-50 6 50/250 1 73 NO 06-07-73 PH-700 5-15 14 15/125 1 74 NO 10-25-79
PH727 5-15 18,16 10,13/125 1 75 NO 06-27-99 *PH-960 L5-15 18 10/125 1 76 YES 10-09-92 PH-961 L5-20 16,14,12 13,15,20/125 1 125 YES
PL-3001 1-15 18 10/125 1 124 Yes 06-27-66 PL-3009 1-15 18,16,14 10,13,15/125 1 126 NO 10-27-04 PL-3010 5-15 18,16,14 10,13,15/125 1 127 NO 10-27-04
RA3 10-20 6 20/250 1 77 NO 11-22-84 R1 5-15 18,16,14 10,13,15/125 1 78 NO 11-26-80 R2 5-15 18,16,14 10,13,15/125 1 79 NO 11-26-80
R3-1 5-15 18,16,14 10,13,15/125 1 80 NO 11-26-80
R3-2 5-15 18,16,14 10,13,15/125 1 80 NO 11-26-80 R3-3 5-15 16,14 13,15/125 1 80 NO 11-26-80
R3 5-15 18,16,14 10,13,15/125 1 80 NO 11-26-80 R4 5-15 18,16,14 10,13,15/125 1 81 NO 11-26-80 R5 5-15 18,16 10,13/125 1 81 NO 11-26-80
S1 5-15 18,16,14 10,13,15/125 1 82 NO 11-26-80 S2-2 1-15 18,16,14 10,13,15/125 1 83 NO 11-26-80 S3 1-15 18,16,14 10,13,15/125 1 84 NO 11-26-80
S-289-S 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-S-GT 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-S-K 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
S-289-S-L 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-S-LT 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-S-O 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
S-289-S-T 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
S-289-SN 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-SN-G 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
S-289-SN-GT 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-SN-K 1-15 18,16,14 10,15,15/125 1 88 NO 06-27-66 S-289-SN-L 1-15 18,16,14 10,15,15/125 1 88 NO 06-27-66
S-289-SN-LT 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-SN-O 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 S-289-SN-T 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
S-289-T 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 SPH-290K 5-15 18,16,14 10,13,15/125 1 64 NO 06-27-66 SPH-727 5-15 - - 1 75 NO 06-27-66
133-SP 1-15 27,20,18,16 2,2,10,13/125 1 85 NO 05-23-80 133-S 1-15 18,16 10,13/125 1 85 NO 05-23-80 173,-A 5-15 18,16,14/3 10,13,15/125 1 86 NO 05-19-66
185,-F 5-15 18,16,14/3 10,13,15/125 1 -- NO 05-19-66
289-D, -E 1-15 27,18,17,16,14 2,10,12,13,15/125 1 87 NO 05-03-66 289-F, -G 1-15 27,18,17,16,14 2,10,12,13,15/125 1 87 NO 05-03-66
File E62405SP Vol. 3 Index Page 5 Issued: 2000-01-05
Revised: 2007-05-21
ATTACHMENT PLUG CAPS:
NEMA CONFIGURATION
Belden
Models Config. Cord AWG A / V Sec. Fig. CUL Issued 289-J 1-15 27,18,17,16,14 2,10,12,13,15/125 1 87 NO 05-03-66 289-Q 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
289-R 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 289-S 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 289-S-G 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
289-S-K 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 289-S-L 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 289-S-O 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66
289-SN 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 289-SN-G 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 289-SN-K 1-15 18,16,14 10,15,15/125 1 88 NO 06-27-66
289-SN-L 1-15 18,16,14 10,15,15/125 1 88 NO 06-27-66 289-SN-O 1-15 27,18,17,16,14 2,10,12,13,15/125 1 88 NO 06-27-66 304 5-20 12 20/125 1 89 NO 06-27-66
310 5-15 14,12 15,15/125 1 90 NO 06-27-66 310A 5-15 14,12 15,15/125 1 90 NO 06-27-66 333RP 5-15 18,16 10,13/125 1 -- NO 11-27-79
366-S 5-15 18,16,14 10,13,15/125 1 91 NO 02-26-80 366-SE 5-15 18,16,14 10,13,15/125 1 91 NO 02-26-80 366-SP 5-15 18,16,14 10,13,15/125 1 91 NO 02-26-80
366-SPE 5-15 18,16,14 10,13,15/125 1 91 NO 02-26-80 377B 1-15 18,16 10,13/125 1 92 NO 01-06-97 610A 1-15 18,16,14 10,13,15/125 1 93 NO 07-10-96
610A-S 1-15 18,16,14 10,13,15/125 1 93 NO 07-10-96 644, -A 1-15 18, 16 10/125 1 94 NO 01-06-97 661 1-15 18, 16 10/125 1 96 NO 01-06-97
661A 1-15 18, 16 10/125 1 96 NO 01-06-97 648 5-30 10 30/125 1 95 NO 08-16-74 668A 5-20 18,16,14,12 10,13,15,20/125 1 71A NO 06-27-66
668B 6-20 18,16,14,12 10,13,15,20/250 1 71A NO 06-27-66 668C 6-15 18,16,14,12 10,13,15,15/250 1 71A NO 06-27-66 668D 5-15 18,16,14 10,13,15/125 1 71A NO 03-28-73
668G 6-15 18,16,14 10,13,15/250 1 71A NO 03-28-73 668F 1-15 18,16,14 10,13,15/125 1 71A NO 03-28-73 697 1-15 18 10/125 1 97 NO 02-28-89
772 1-15 18,17 10,12/125 1 98 NO 07-22-83 772A 1-15 18,17 10,12/125 1 98 NO 07-22-83 772B 1-15 17 12/125 1 98 NO 07-22-83
772S 1-15 18,17 10,12/125 1 98 NO 07-22-83 772SA 1-15 18,17 10,12/125 1 98 NO 07-22-83 813(h) 5-15 18,16,14 10,13,15/125 1 -- NO 01-21-87
814(h) 5-15 18,16,14 10,13,15/125 1 100 NO 01-21-87 814A(h) 5-15 18,16,14 10,13,15/125 1 100 NO 01-21-87 814B(h) 5-15 18,16,14 10,13,15/125 1 100 NO 01-21-87
814C(h) 5-15 18,16,14 10,13,15/125 1 100 NO 01-21-87 814D(h) 5-15 18,16,14 10,13,15/125 1 100 NO 01-21-87 815 1-15 18,16 6,6/125 1 101 NO 02-18-87
816 5-15 18 6/125 1 -- NO 02-18-87 838 1-15 18,16 10,13/125 1 102 NO 06-30-89 838B 1-15 18,17 10,12/125 1 102 NO 06-30-89
File E62405SP Vol. 3 Index Page 6 Issued: 2000-01-05
Revised: 2007-05-21
ATTACHMENT PLUG CAPS:
NEMA CONFIGURATION
Belden
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
847 5-15 18 10/125 1 103 NO 08-08-88
860 1-15 18,17,16,14 10,12,13,15/125 1 104 NO 03-23-92
860-HT 1-15 18,17,16,14 10,12,13,15/125 1 104 NO 03-23-92
860-T 1-15 18,17,16,14 10,12,13,15/125 1 104 NO 03-23-92
862 5-15 18,16,14/3 10,13,15/125 1 63 NO 06-27-66
1362A 1-15 18, 16, 14/3 10,13,15/125 1 - NO
879B 1-15 14,12 15,15/125 1 105 NO 03-27-73
882 5-15 18,17,16,14 10,12,13,15/125 1 -- NO 03-23-92
882-T 5-15 18,17,16,14 10,12,13,15/125 1 -- NO 03-23-92
894B(EMI) 5-15 18,16,14 7,7,7/125 1 106 NO 08-22-91
926 1-15 18,16,14 10,13,15/125 1 107 YES 08-23-96
926C 1-15 18,16,14 10,13,15/125 1 -- YES 01-05-00
952 5-15 18,16,14 10,13,15/125 1 -- YES 08-23-96
953 5-15 18,16,14 10,13,15/125 1 -- YES 08-23-96
1533 1-15 18,16,14 10,13,15/125 1 109 NO 12-17-84
1533A 1-15 18,16,14 10,13,15/125 1 109 NO 12-17-84
1533C 1-15 18,16,14 10,13,15/125 1 109 NO 12-17-84
1541 Locking 16,14 13,15/125 1 110 NO 10-09-92
5197 5-15 18,16 10,13/125 1 112 NO 03-22-73
5205 5-15 18,16 10,13/125 1 112 NO 03-22-73
5210 5-15 18,16 10,13/125 1 112 NO 03-22-73
5942 5-15 18 10/125 1 111 NO 03-22-73
5943 5-15 18,16 10,13/125 1 112 NO 03-22-73
5944 5-15 18,16,14 10,13,15/125 1 113 NO 11-26-84
5945 1-15 18,16/14 10,13,15/125 1 113 NO 11-26-84
5982 5-15 18,16,14 10,13,15/125 1 114 NO 02-16-82
5983 5-15 18,16,14 10,13,15/125 1 115 NO 02-16-82
PL1030P 10-30 10/3 30/125,250 1
IEC CONFIGURATION
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
AEC-150 C14 18,16,14 10,13,15/125 1 116 NO 06-28-89
388 C14 18 10/125 1 117 NO 03-02-70
388A C14 18 10/125 1 117 NO 03-02-70
388B C14 18 10/125 1 117 NO 03-02-70
388C C14 18 10/125 1 117 NO 03-02-70
388D C14 18 10/125 1 117 NO 03-02-70
388E C14 18 10/125 1 117 NO 03-02-70
388F C14 18 10/125 1 117 NO 03-02-70
388J C14 18 10/125 1 117 NO 03-02-70
388L C14 18 10/125 1 117 NO 03-02-70
388K C14 18 10/125 1 118 NO 03-02-70
File E62405SP Vol. 3 Index *Page 7 Issued: 01-05-00
New: 08-31-01
ATTACHMENT PLUG CAPS:
NON-STANDARD CONFIGURATION
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
PH-100 -- 18 10/125 1 119 NO 06-27-66
PH-235 -- 14 16/250 1 120/121 NO 04-01-86
PH-235A -- 14 16/250 1 120/121 NO 04-01-86
PH-235B -- 14 16/250 1 120/121 NO 04-01-86
PH-235C -- 14 16/250 1 120/121 NO 04-01-86
PH-235D -- 14 16/250 1 120/121 NO 04-01-86
PH-235E -- 14 16/250 1 120/121 NO 04-01-86
PH-235F -- 14 16/250 1 120/121 NO 04-01-86
PH-235G -- 14 16/250 1 120/121 NO 04-01-86
PH-633 -- 18 2.5/250 1 122 NO 10-20-75
916 -- 18 10 1 123 NO 08-20-90
916A -- 18 10 1 123 NO 08-20-90
File E62405SP Vol. 3 Index Page 8 Issued: 2000-01-05
Revised: 2013-08-09
CORD CONNECTOR BODIES:
NEMA CONFIGURATION
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
AEC-202 1-15 18,16,14 10,13,15/125 2 1 NO 2000-05-02
AEC-210 5-15 18,16,14 10,13,15/125 2 2 NO 2000-05-02
AEC-212 5-15 16,14 13,15/125 2 2 NO 2000-05-02
AEC-231 1-15 16,14 13,15/125 2 3 NO 2000-05-02
AEC-232 6-15 16,14 13,15/250 2 3 NO 2000-05-02
AEC-234 6-20 16,14 13,18/250 2 3 NO 2000-05-02
AEC-235 5-20 16,14 13,18/125 2 3 NO 2000-05-02
F1-3 5-15 16,14 13,15/125 2 9 NO 1984-09-18
FL-3 5-15 16,14 13,15/125 2 10 NO 1988-04-13
PH-32 5-15 16,14 13,15/125 2 11 NO 1966-06-28
PH-32D 1-15 16,14 13,15/125 2 -- NO 1966-06-28
PH-108B 5-15 16,14 13,15/125 2 -- NO 1966-06-28
PH-108A 5-15 16,14 13,15/125 2 11 NO 1966-06-28
645 1-15 16 13/125 2 27 NO 1966-06-28
645A 1-15 16 13/125 2 27 NO 1966-06-28
5987 5-15 16 13/125 2 31 NO 1989-12-27
IEC CONFIGURATION
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
AEC-250 C13 18,16,14 10,13,15/250 2 4 NO 2000-05-02
AEC-250A,-B C13 18,16,14 10,13,15/250 2 4 NO 2000-05-02
AEC-251 C17 18,16,14 10,13,15/250 2 4 NO 2000-05-02
AEC-255L,-R C13 18,16,14 10,13,15/250 2 4 NO 2000-05-02
AEC-255LA, C13 18,16,14 10,13,15/250 2 4 NO 2000-05-02
-LB,-RA,-RB
AEC-256L,-R C17 18,16,14 10,13,15/250 2 4 NO 2000-05-02
CX-300 C13 18 10/125 2 8 NO 1984-12-06
PH-913 C7 18 13/125 2 16 NO 1969-12-15
386,-C,-E,-F,-
H,-J,-L
C13 18,16 10,13/250 2 22 NO 1970-03-02
386A C13 18,16,14 10,13,15/125
or 250
2 22 YES 1970-03-02
386AL C13 18,16,14 10,13,15/125
or 250
2 32 YES 2000-05-02
386B C13 18,16 10,13/250 2 22 NO 1970-03-02
386P, -POD C13 18,16,14 10,13,15/125 2 23 NO 1970-03-02
386Q C13 14 15/125 2 24 NO 1970-03-02
390C C13 18,16,14 10,13,15/125 2 25 NO 1970-03-02
390D C17 18,16 10,13/250 2 22 NO 1970-03-02
390E C13 18,16,14 10,13,15/125 2 25 NO 1970-03-02
391,-A, -B, C13 18,16,14 10,13,15/125 2 25 NO 1970-03-02
-C, -E
726 C13 18,16,14 10,13,15/125 2 28 NO 1970-03-02
904 C13 18,16,14 10,13,15/125 2 25 NO 1970-03-02
910, 911 C13 18,16,14 10,13,15/250 2 25 NO 1970-03-02
846 C13 18 10/125 2 29 NO 1988-07-25
877 C13 18 10/125 2 30 NO 1990-08-20
File E62405SP Vol. 3 Index Page 9 Issued: 2000-01-05
Revised: 2008-08-05
NON-STANDARD CONFIGURATION
Models Config. Cord AWG A / V Sec. Fig. CUL Issued
AEC-380 2 cond. 18,16 7/125 2 5 NO 2000-05-02
AEC-381 3 cond. 18,16 7/125 2 5 NO 2000-05-02
CX-150 2 cond. 18 7/125 2 6 NO 1984-11-29
CX-160AK 2 cond. 18 7/125 2 7 NO 1984-11-28
PH-94 2 cond. 18,16 13/125 2 12 NO 1966-06-28
PH-98 2 cond. 18 7/125 2 13 NO 1966-06-28
PH-103 2 cond. 18,16 13/125 2 12 NO 1966-06-28
PH-104 2 cond. 18 10/125 2 21 NO 2000-05-02
PH-109 2 cond. 18,16 2/125 2 12 NO 1966-06-28
*PH-163 3 cond. 18 10/125 2 21 NO 2000-05-02
PH-164 2 cond. 18 10/125 2 21 NO 2000-05-02
PH-322H 2 cond. 27 0.12/125 2 14 NO 1973-05-02
PH-326 3 cond. 18,16 7/125 2 15 NO 1966-06-28
SFE-2 2 cond. 18 0.4/125 2 17 NO 1987-01-07
SPH-222 2 cond. 18 10/125 2 21 NO 2000-05-02
SPH-243 3 cond. 18 7/125 2 18 NO 1966-06-28
SPH-602 2 cond. 18 10/125 2 21 NO 2000-05-02
SPH-622B 3 cond. 18 7/125 2 19 NO 1973-02-28
SPH-637 4 cond. 18 7/125 2 20 NO 1966-06-28
SPHC-750 2 cond. 27 0.12/125 2 21 NO 1967-10-24
638A 3 cond. 18 7/125 2 26 NO 1966-06-28
CURRENT TAP:
NEMA CONFIGURATION
Cat. No. Config. Cord AWG Electrical A/V Sec. Fig. C-UL
728, -APOD 18,16 10,13/125 3 1,2 No
745 18,16 10,13/125 3 - No
AEC-50 Series 18 10/125 3 3 No
US615RPAB,
US615RPAT
6-15 18,16,14 10,13,15/250 3 4,5 Yes
US615RPAL,
US615RPAR
6-15 18,16,14 10,13,15/250 3 6,7 Yes
US515RPAB,
US515RPAT
5-15 18,16,14 10,13,15/125 3 8,9 Yes
US515RPAL,
US515RPAR
5-15 18,16,14 10,13,15/125 3 10,11 Yes
File E62405SP Vol. 3 Index Page 10 Issued: 2000-01-05
Revised: 2003-03-05
REPLACES PAGE 10
CERTIFICATION
RECORD
The company named below has been authorized by CSA International to represent the products listed in this record as “CSA Certified” and to affix the CSA Mark to these
products according to the terms and conditions of the CSA Service Agreement and applicable CSA program requirements (including additional Markings).
File No: 053182_0_000
Class No: 5842 02 CORD SETS Power Supply Cords
SUBMITTOR
4549662
Volex (Asia) Pte Ltd. 35 Tampines St 92 Singapore, 528880 Singapore
FACTORIES
4549665
PT. Volex Indonesia Kawasan Industri Sekupang Batam Island, 29422 Indonesia
4549666
Volex Cable Assembly (Shenzhen) Co. Ltd. Volex Bldg 1173 Shenhui Rd Bao'an Henggang Shenzhen, Guangdong 518115 China
4648585
Volex Cable Assembly (Zhongshan) Co. Ltd. No 2 Sinta N St Zhongshan Torch Hi-Tech Industry Development Zone Zhongshan, Guangdong 528437 China
4668744
Volex Interconnect (India) Pvt.Ltd. 22/1-A Kazura Gardens First Street, Neelankarai Chennai, 600041 India
4668745
Volex Cable Assembly (Vietnam) Co. Ltd. Lot no D-5b, Thang Long Industrial Park
Cert.Record No 053182_0_000, Clas... Cert.Record No 053182_0_000, Clas... Page 1 of 4
1/14/2014
January 13, 2014(Replaces: September 30, 2013)
� Special use cord sets with IEC C19 connector body, Cat No VSC19, rated 10A, 13A, 15A, 16A, 125/250V moulded onto 12-18/3 AWG SJT, 16-18/3 AWG SVT, 12-18/3 AWG SJTW, flexible cords.
� Special use power supply cord sets consisting of connector body, Cat No DLC5A3, 2.5A, 125V moulded onto No 18/3 AWG, Type SVT.
� Special use power supply cord, rated 2.5A, 125/250V with s-use female connector body, Cat No DLC5SA3 moulded onto Nos 18/2AWG, Types SPT-2 flexible cord.
� Special use power supply cord, Special-Use connector body, Cat No 386, 386-A and 386-B moulded onto 18 AWG (rated 10A) 16 AWG (rated 13A) Types SJ, SJO, SJOW, SJT, SJTW, SVT, SV, SVTO flexible cords and 14 AWG (rated 15A) SJ, SJO, SJOW, SJT, SJTW, SVT flexible cords all rated 125V/250V.
� Special use power supply cord consisting of Special-Use connector body, Cat No 386A moulded onto 18/3 AWG Type SPT-2 flexible cord.
� Power supply cords consisting of Special-Use connector Cat No 386AL, rated 10 A, 125V/250V on No 18/3 AWG, Types SJT, SJT shielded, SJTW, SVT, SVT shielded; rated 13 A, 125V/250V on No 16/3 AWG, Types SJT, SJT shielded; rated 15 A, 125V/250V on No 14/3 AWG, Types SJT, SJT shielded.
� 2-pole, 2-wire, configuration 1-15P, Cat No 289-R � Special-use plugs, Cat No 664A. � Power supply cords, "Hospital Grade", Cat No. AEC-61.
Dong Anh District Hanoi, Vietnam
4776873
Volex Interconnect Systems (Suzhou) Co., Ltd. Part A Weiting Industrial Zone No. 9 Weixin Road Suzhou Industrial Park Suzhou, Jiangsu 215122 China
Cat No Configuration Rating Cord Size (AWG) Cord Type
VAC13KS S-u Male (C13) 10 A, 125/250 V 13 A, 125/250 V 15 A, 125/250 V
18/3 16/3 14/3
SVT, SJT SJT SJT
VAC13KBS S-u Male (C13) 15 A, 125/250 V 14/3 SJT
VAC14S, VAC14A
S-u Male (C14) 10 A, 125/250 V 18/3 SVT (SH & UNSH), SJT (SH & UNSH), SVTO, SVTOO, SJTO, SJTW, SJTOO, SJTOW, SJTOOW.
VAC14BS S-u Male (C14) 10 A or 13 a 125/250 V
16/3 SJT (SH & UNSH)
VAC14LS S-u Male (C14) 10A, 15 A or 16 A, 125/250V
14/3 SJT, SJTW
10A or 13A, 125/250 V
16/3 SJT, SJTW, SJTOW
VAC14KC, VAC14KAL, VAC14KAR
S-u Male (C14) 10 A, 125/250 V 10 A or 13 A, 125/250 V
18/3 16/3
SVT, SJT SJT
VAC14LA S-u Male (C14) 10 A, 125/250 V 13 A, 125/250 V
18/3 16/3
SVT SJT, SJTO,
Cert.Record No 053182_0_000, Clas... Cert.Record No 053182_0_000, Clas... Page 2 of 4
1/14/2014
10A or 15A, 125/250 V
14/3
SJTOO, SJTW, SJTOW, SJTOOW SJT
SMC14LA S-u Male (C14) 10 A, 125/250 V 18/3 SJT, SJTO, SJTOO, SJTW, SJTOW, SJTOOW
13 A, 125/250 V 16/3 SJT, SJTO, SJTOO, SJTW, SJTOW, SJTOOW
VAC17KS S-u Male (C17) 10 A, 125/250 V 18/2 SJT
VAC20S, VAC20A S-u Male (C20) 16 A, 125/250 V 13 A, 125/250 V
14/3 16/3
SJT SJT
VAC20KC S-u Male (C20) 16 A, 125/250 V
14/3 SJT
VAC20KAR, VAC20KAL
S-u Male (C20) 15 A or 16 A, 125/250 V 13 A, 125/250 V
14/3 16/3
SJT SJT
VAC20AD S-u Male (C20) 16A, 125/250 V 20 A, 125/250 V
14/3 12/3
SJT SJT, SJTO, SJTOO, SJTW, SJTOW, SJTOOW
CN-4001, 744 S-use Female 10A, 250V 18/2 SVT
618C Strain Relief - 17/2, /3, 18/2, /3 SJT, SJTW, SVT
664L S-use Male 10A, 125V 18/2 SVT, SPT-1, -2
780F S-use Male 10A, 125V 18/3 SVT
PL-3001 1-15P - 18/2 SV
SR5004, SR5005, SR5010
Strain Relief - 18/2 SVT, SV
SR5024 Strain Relief - 16/2 SJT, SJTW
AEC-212 5-15R - 14/3 16/3 18/3 SJ, SJO, SJOW, SJT, SJTO, SJTW, HPN, SPT-2, SPT-3, SJ, SJO, SJOW, SJT, SJTO, SJTW HPN, SPT-2, SPT-3, SJ, SJO, SJOW, SJT, SJTO, SJTW, SV, SVO, SVT
KM-5A 6-30P 6-50P 7-30P 30A, 250V 50A, 250V 30A, 277V
10/3,12/3 S, SJ, SJOW, SJT, SJTO, SJTOW, SJTW, SO, SOW, SPT-3 SRDT, ST, STO, STOW, STW
KM5E 14-30P 30A, 125/250V 10/4 DRT,SJ,SJO, SJOW,SJT,SJTO, SJTOW,SJTW,
Cert.Record No 053182_0_000, Clas... Cert.Record No 053182_0_000, Clas... Page 3 of 4
1/14/2014
Note: These are Certified only for supply to manufacturers for the assembly, as components of equipment where the suitability of the c ombination is determined in the end use.
SO,SOW,SPT-3 SRDT,ST,STO, STOW,STW
G148-A Strain Relief - 18/2 SVT
Cert.Record No 053182_0_000, Clas... Cert.Record No 053182_0_000, Clas... Page 4 of 4
1/14/2014
CERTIFICATION RECORD
The company named below has been authorized by CSA International to represent the products listed in this record as “CSA Certified” and to affix the CSA Mark to these products according to the terms and conditions of the CSA Service Agreement and applicable CSA program requirements (including additional Markings).
File No: 053182_0_000Class No: 5841 03 CORD SETS Special-use Cord Sets SUBMITTOR
4549662
Volex (Asia) Pte Ltd. 35 Tampines St 92 Singapore, 528880 Singapore
FACTORIES
4549665
PT. Volex Indonesia Kawasan Industri Sekupang Batam Island, 29422 Indonesia
4549666
Volex Cable Assembly (Shenzhen) Co. Ltd. Volex Bldg 1173 Shenhui Rd Bao'an Henggang Shenzhen, Guangdong 518115 China
4648585
Volex Cable Assembly (Zhongshan) Co. Ltd. No 2 Sinta N St Zhongshan Torch Hi-Tech Industry Development Zone Zhongshan, Guangdong 528437 China
4668744
Volex Interconnect (India) Pvt.Ltd. 22/1-A Kazura Gardens First Street, Neelankarai Chennai, 600041 India
Page 1 of 6Cert.Record No 053182_0_000, Class No 5841 03, DQD No 548 Rev.2001-10-31
June 4, 2012(Replaces:December 8, 2010)
Special use cord set consisting of a bi-pin connector body, Cat Nos PS309 and PS309P, 7A, 125V assembled to submittor's Certified power supply cord incorporating a parallel blade attachment plug cap, moulded on No 18/2 AWG, Type SPT-1, -2 flexible cord. Special use cord set consisting of connector body, Cat No PS625, PS625A, PS625LA (angle), 125V assembled to submittor's Certified power supply cord incorporating a parallel blade grounding type attachment plug cap, moulded on Nos 18/3 AWG (10A), 16/3 AWG (13A), Types SVT, SJT shielded and non-shielded flexible cord. Special use cord set, consisting of connector bodies, Cat Nos PS625, PS625A; assembled to submittor's power supply cords incorporating plug caps, Cat Nos PS25, PS25A, moulded onto No 18/3, Type SVT flexible cord, 10A, 125V and No. 18/3 SJT flexible cord, 10A, 125V and 250V. Special use cord sets consisting of CSA Certified male plugs and female connectors, Cat Nos M1250A, M1250R, M1250P, rated 125V, 7.0A, Cat No MS225, rated 10A, 125V Cat Nos MS212, MS212A and M2825, rated 125V, 15A, and Cat No VAC17S and VAC17BS, rated 10A,13A, 15A, 125V, and Cat No VAC17A, rated 13A, 125V. Special use cord sets with IEC C7 connector body, Cat No. SZC7S, rated 7A, 125/250V moulded onto 18/2 AWG SPT-1, NISPT-1, SPT-2 and NISPT-2 flexible cords. Special use cord sets with IEC C7 connector body, Cat No. SOC7S, rated 7 A, 125 V moulded onto 18/2 AWG NISPT-2 flexible cords. Special use cord sets with IEC C17 connector body Cat No PIC17BS, rated 15A, 125V moulded onto 14/2 AWG SJT flexible cords. Special-use cord sets, consisting of the following connector body moulded onto CSA Certified power supply cords as indicated:
4668745
Volex Cable Assembly (Vietnam) Co. Ltd. Lot no D-5b, Thang Long Industrial Park Dong Anh District Hanoi, Vietnam
4776873
Volex Interconnect Systems (Suzhou) Co., Ltd. Part A Weiting Industrial Zone No. 9 Weixin Road Suzhou Industrial Park Suzhou, Jiangsu 215122 China
Connector Body Configuration Power Supply Cord Flexible Cord*
Configuration
Cat No IEC 320 CBCS Rating AWG Type Plug CapM1625 Type C13 10A, 125V 18/3 SVT (S&U),
SJT (S&U), SVTO, SVTOO,
5-15P
Page 2 of 6Cert.Record No 053182_0_000, Class No 5841 03, DQD No 548 Rev.2001-10-31
SJTO, SJTW, SJTOO, SJTOW, SJTOOW
13A, 125V 16/3 SVT (S&U) SJT (S&U)
5-15P
10A, 250V 18/3 SVT, SJT SJTW, SJTOW
VS205S (6-15P)
13A, 250V 16/3 SJT, SJTW, SJTOW
VS205S (6-15P)
V1625 Type C13 10A, 125V 18/3 SPT-2, SJTOW, SVT (S&U), SJT (S&U) SVTO, SVTOO, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P
13A, 125V 16/3 SVT (S&U), SJT (S&U)
5-15P
10A, 250V 18/3 SVT, SJT, SJTW, SJTOW
VS205S (6-15P)
13A, 250V 16/3 SJT VS205S (6-15P)V1625A, V1625LA
Type C13 10A, 125V 18/3 SVT (S&U), SJT (S&U), SVTO, SVTOO, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P
13A, 125V 16/3 SVT (S&U) SJT (S&U)
5-15P
15A, 125V 14/3 SJT (S&U) 5-15P 10A, 250V 18/3 SVT, SJT,
SJTW, SJTOW
VS205S (6-15P)
13A. 250V 16/3 SJT VS205S (6-15P) 15A, 250V 14/3 SJT VS205S (6-15P) 15A, 250V 14/3 SJT VS025A (6-15P)V1625AT Type C13 10A, 125V 18/3 SVT (S&U), 5-15P
Page 3 of 6Cert.Record No 053182_0_000, Class No 5841 03, DQD No 548 Rev.2001-10-31
SJT (S&U) 13A, 125V 16/3 SVT (S&U),
SJT (S&U)5-15P
10A, 250V 18/3 SVT, SJT VS205S (6-15P) 13A, 250V 16/3 SJT VS205S (6-15P)V1625BS Type C13 13A, 125V 16/3 SJT, (S&U),
SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P
15A or 10A, 125V
14/3 SJT (S&U) SJTW, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P
15A or 10A, 250V
14/3 SJT VS025A (6-15P)
13A, 250V 16/3 SJT, SJTW, SJTOW
VS205S (6-15P)
15A, or 10A, 250V
14/3 SJT, SJTW, SJTOW
VS205S (6-15P)
V1625BA Type C13 13A, 125V 16/3 SJT, ST, STW, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P
15A, 125V 14/3 SJT (S&U), ST, STW, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P
V1625H Type C13 10 A, 125 V 13 A, 125 V
18/3 16/3
SJT(S&U) SJT(S&U)
5-15P 5-15P
10A, 250V 18/3 SJT VS205S (6-15P) 13A, 250V 16/3 SJT VS205S (6-15P)VCC13, VCC13A
Type C13 10A, 125V 18/3 SVT (TPE), SJT (TPE)
VPUS15S3,VPUS15DS3
HOC13S Type C13 13A, 125V 16/3 SJT, SJTW, SJTO, SJTOO, SJTOW, SJTOOW
HO515S3
13A, 250V 16/3 SJT, SJTW, VS205S (6-15P)
Page 4 of 6Cert.Record No 053182_0_000, Class No 5841 03, DQD No 548 Rev.2001-10-31
SJTOW25AC5 (Sp23) Type C5 2.5A, 125V
18 SPT-2,
SVT#5-15P
VAC5S (Sp23) Type C5 2.5A, 125V 18 SPT-2, SVT#
5-15P
VAC5S (Sp23) Type C5 2.5A, 125/250V 18 SPT-2, SVT#
IEC C14
VCC5S Type C5 2.5A, 125V 18 SPT-2 (TPE), SVT (TPE)
VPUS15DS3
VCC5AR Type C5 2.5A, 125V 18 SVT(TPE) VPUS15S3, VPUS15DS3
VAC5AR, VAC5AL (Sp23)
Type C5 3A, 125V 18 SPT-2, N1SPT-2
5-15P
SZC7S
Type C7 7A, 125V 18 SPT-1, NISPT-1, SPT-2, NISPT-2
1-1P
SOC7S Type C7 7A, 125V 18 SPT-2 NISPT-2
1-15P
VAC7A, VAC7PS
Type C7 2A, 3A or 7A, 125V
18 SPT-1, NISPT-1, SPT-2, NISPT-2
1-15P
VAC7S Type C7 2A, 3A or 7A, 125V
18 SPT-1, NISPT-1, SPT-2, NISPT-2, SJT
1-15P
VCC7S Type C7 7A, 125V 18 NISPT-2(TPE)
VPUS15S2
VAC15S, (Sp23)
Type C15 10A, 125V 13A, 125V 15A, 125V
18/3 16/3 14/3
HPN HPN HPN
5-15P or (Sp23)
VAC15BS, (Sp23)
Type C15 10A, 125V
18/3
SJT, SJ, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P or (Sp23)
13A, 125V 16/3 SJT, SJ, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P or (Sp23)
Page 5 of 6Cert.Record No 053182_0_000, Class No 5841 03, DQD No 548 Rev.2001-10-31
LEGEND: "(S&U) " denotes shielded and unshielded; "(Sp23)" Special-use 2-pole, 3-wire grounding type; "CBCS" Connector Body and Cord Set; *CSA Certified and/or C-UL Listed; #Shielded and Unshielded.
Special use power supply cord consisting of the following connectors VSCC13, rated 10A, 125/250V moulded on 18/3 AWG, Type SJT and SVT. Special use power supply cord with PIC17S connector body, rated 10A, 125V moulded onto 18/2 AWG SVT flexible cords. 2-contact type, Cat No. 161. 2-contact grounding type, Cat No 163.
15A, 125V 14/3 SJT, SJ, SJTO, SJTW, SJTOO, SJTOW, SJTOOW
5-15P or (Sp23)
VAC15A, (Sp23)
Type C15 16A, 125/250V13A, 125V 13A, 250V
14/3 16/3 16/3
SJT, SJTW SJT, SJTW SJT, SJTW
VAC14LS 5-15P or (Sp23) 6-15P or (Sp23)
VAC19 Type C19 13A, 125V 15A, 125V 13A, 250V 15A, 250V
16/3 14/3 16/3 14/3
SJT 5-15P or (Sp23) 6-15P or (Sp23)
VAC19A Type C19 13A, 125V 15A, 125V 20A, 125V 13A, 250V 15A, 250V 20A, 250V
16/3 14/3 12/3 16/3 14/3 12/3
SJT SJT (Shielded) SJT SJT (Shielded)
5-15P or (Sp23) 5-20P or (Sp23) 6-15P or (Sp23) 6-20P or (Sp23)
VAC19KS, VAC19H
Type C19 15A, 125V 16A, 125V 20A, 125V 15A, 250V 16A, 250V 20A, 250V
14/3 14/3 12/3 14/3 14/3 12/3
SJT 5-15P or (SP23) 5-20P or (Sp23) 6-15P or (Sp23) 6-20P or (Sp23)
Page 6 of 6Cert.Record No 053182_0_000, Class No 5841 03, DQD No 548 Rev.2001-10-31