Zero DowntimeZero Downtime Solutions Solutions for yourfor your Distribution Center Distribution Center

© 2008 Fenner Drives MSDC-003

311 West Stiegel StreetManheim, PA 17545-1747 USA800-243-3374717-665-2421

Hudson RoadLeeds, LS9 7DF UK+44 (0) 870 7577007+44 (0) 113 2493486

www.fennerdrives.com

Solutions for the Floor, and the Roof !

Fenner Drives offers you easy, one-stop shopping. Not only does PowerTwist Plus offer great solutions for your conveying needs, it also provides unrivaled solutions for your HVAC needs.

Conventional rubber V-belts contain an inner cord which transmits vibrations from the motor to the driven components, vibrations that cause system noise and shorten the life of your bearings. PowerTwist Plus V-Belts combine a high-performance polyurethane elastomer reinforced with multiple plies of polyester into a segmented twist-lock design. That gives you a high strength, low stretch, vibration-dampening V-belt with the same horsepower rating as classical section V-belts. PowerTwist Plus V-Belts also offer high resistance to abrasion, shock loads, and harsh environments.

PowerTwist Plus V-Belts can be made to the required length by hand in seconds and rolled onto the drive like a bicycle chain. There’s no machine tear-down required and no need to dismantle drive components. No tools, no problem! Plus, they have the same cross section as other belts so they can be installed on existing pulleys with no change in setup. They are available in 3L, A/4L, B/5L, C and D sections.

Upgrade to a fast, permanent replacement that keeps buildings’ occupants cool in summer, warm in winter and profi table all year long.

• Reduce drive vibration and noise for quieter running systems

• Reduce V-belt inventory — always have the right belt in stock

• Permanent replacement V-belt — just fi t it and forget it! 0 10 20 30 40 50 60Revolution Number

Velo

city

in In

/Sec

Label: Belt Resonance Problem

S-56 -M1H Motor Inboard Horizontal

Rubber V-belts

PowerTwist Plus

www.fennerdrives.com 800.243.3374

Zero Downtime Solutions for your Conveying NeedsDistribution Centers

Roller Drive™

With a twist of the wrist, quickly and permanently replaces endless rubber belts on belt-driven live roller conveyor systems. • Quick installation; installs in minutes without tools.

• Belts are easily made to the required length by hand in seconds

• Increased belt fl exibility for longer life on curves

• Runs in V- and round pulleys

• Any Belt, Any Time!

V-Belt Driven Live Roller Conveyors • True drop-in direct replacement; same ride height as B/17 section endless V-belts

• No need to dismantle head and tail drive components — just “fi sh” it through your drive system

Rapistan® Conveyor Systems (Siemens Rapistan, Dematic) • Perfectly suited to replace 9/16" round profi le belts

• Installs quickly without dismantling drive system components

• Industry proven superior replacement for round belts in this application

Belt & Chain Tensioners®

Eliminates the need to manually retension your drive systems.

• Allows belt installation without tools

• Maintain correct drive belt tension automatically, achieving optimum drive performance

• Reduce system downtime due to periodic belt retensioning

• Cut down operating and component replacement costs due to premature belt failure

Endless O-Rings

Replacement O-Rings for line shaft, live roller conveyors and light-duty transfer conveyors.

• Elastic with excellent memory

• Popular 1/8", 3/16" and 1/4" sizes always in stock

• Custom sizes, colors and durometers made to order with rapid order turnaround

• High coeffi cient of friction

• Solid polyurethane construction

Blue-Green Driver Pad

Don’t be fooled by the inferior yellow, black, or green copycats; we’ve got the real thing. Often imitated, never duplicated. • Manufactured to OEM specifi cations

• Always a consistent profi le with ideal hole alignment

• Contains 100% virgin material, allowing maximum performance

• Always in stock, ready to go to you!

Rapistan® is a registered trademark of Dematic Corp.

Twisted O-Rings

Zero downtime replacement for original endless O-Rings. • Easily installed in seconds with no tools and without dismantling line shaft or rollers

• Reduce downtime on live roller conveyor systems. No welding required!

• Quickly connect with easy to use metal or plastic connectors

• Popular 3/16" diameter always in stock, ready to ship to you! Non-stock sizes can be made in a week or less.

www.fennerdrives.com 800.243.3374

Zero Downtime Solutions for your Conveying NeedsDistribution Centers

Roller Drive™

With a twist of the wrist, quickly and permanently replaces endless rubber belts on belt-driven live roller conveyor systems. • Quick installation; installs in minutes without tools.

• Belts are easily made to the required length by hand in seconds

• Increased belt fl exibility for longer life on curves

• Runs in V- and round pulleys

• Any Belt, Any Time!

V-Belt Driven Live Roller Conveyors • True drop-in direct replacement; same ride height as B/17 section endless V-belts

• No need to dismantle head and tail drive components — just “fi sh” it through your drive system

Rapistan® Conveyor Systems (Siemens Rapistan, Dematic) • Perfectly suited to replace 9/16" round profi le belts

• Installs quickly without dismantling drive system components

• Industry proven superior replacement for round belts in this application

Belt & Chain Tensioners®

Eliminates the need to manually retension your drive systems.

• Allows belt installation without tools

• Maintain correct drive belt tension automatically, achieving optimum drive performance

• Reduce system downtime due to periodic belt retensioning

• Cut down operating and component replacement costs due to premature belt failure

Endless O-Rings

Replacement O-Rings for line shaft, live roller conveyors and light-duty transfer conveyors.

• Elastic with excellent memory

• Popular 1/8", 3/16" and 1/4" sizes always in stock

• Custom sizes, colors and durometers made to order with rapid order turnaround

• High coeffi cient of friction

• Solid polyurethane construction

Blue-Green Driver Pad

Don’t be fooled by the inferior yellow, black, or green copycats; we’ve got the real thing. Often imitated, never duplicated. • Manufactured to OEM specifi cations

• Always a consistent profi le with ideal hole alignment

• Contains 100% virgin material, allowing maximum performance

• Always in stock, ready to go to you!

Rapistan® is a registered trademark of Dematic Corp.

Twisted O-Rings

Zero downtime replacement for original endless O-Rings. • Easily installed in seconds with no tools and without dismantling line shaft or rollers

• Reduce downtime on live roller conveyor systems. No welding required!

• Quickly connect with easy to use metal or plastic connectors

• Popular 3/16" diameter always in stock, ready to ship to you! Non-stock sizes can be made in a week or less.

Zero DowntimeZero Downtime Solutions Solutions for yourfor your Distribution Center Distribution Center

© 2008 Fenner Drives MSDC-003

311 West Stiegel StreetManheim, PA 17545-1747 USA800-243-3374717-665-2421

Hudson RoadLeeds, LS9 7DF UK+44 (0) 870 7577007+44 (0) 113 2493486

www.fennerdrives.com

Solutions for the Floor, and the Roof !

Fenner Drives offers you easy, one-stop shopping. Not only does PowerTwist Plus offer great solutions for your conveying needs, it also provides unrivaled solutions for your HVAC needs.

Conventional rubber V-belts contain an inner cord which transmits vibrations from the motor to the driven components, vibrations that cause system noise and shorten the life of your bearings. PowerTwist Plus V-Belts combine a high-performance polyurethane elastomer reinforced with multiple plies of polyester into a segmented twist-lock design. That gives you a high strength, low stretch, vibration-dampening V-belt with the same horsepower rating as classical section V-belts. PowerTwist Plus V-Belts also offer high resistance to abrasion, shock loads, and harsh environments.

PowerTwist Plus V-Belts can be made to the required length by hand in seconds and rolled onto the drive like a bicycle chain. There’s no machine tear-down required and no need to dismantle drive components. No tools, no problem! Plus, they have the same cross section as other belts so they can be installed on existing pulleys with no change in setup. They are available in 3L, A/4L, B/5L, C and D sections.

Upgrade to a fast, permanent replacement that keeps buildings’ occupants cool in summer, warm in winter and profi table all year long.

• Reduce drive vibration and noise for quieter running systems

• Reduce V-belt inventory — always have the right belt in stock

• Permanent replacement V-belt — just fi t it and forget it! 0 10 20 30 40 50 60Revolution Number

Velo

city

in In

/Sec

Label: Belt Resonance Problem

S-56 -M1H Motor Inboard Horizontal

Rubber V-belts

PowerTwist Plus