Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
The Z32 Test Set is designed to meet the exact testing requirements specified in Section 5 of the CSA – Z32-09 and Z32-15 Standard: - Electrical Safety and Essential Electrical Systems in Health Care Facilities. This Standard applies to essential electrical systems and electrical installations in patient care areas of health care facilities. It helps to protect patients and staff by addressing electrical shock hazards associated with critical electrical systems as well as other aspects of electrical safety, such as fires and interference with proper operation.
The Z32 Test Set helps reduce the time needed to perform these tests and improves reporting accuracy. It is easy to use and extremely efficient. With the calibrated voltage / current meter users will have everything they need to perform electrical tests as laid out in the CSA Standard. Perfect for electrical testing companies and the electrical departments of Health Care Facilities.
online: LeadingEdgeSales.ca email: [email protected] call: 1-866-313-9004
Designed to Test 120 volt AC receptacles up to 30 amps:
Section 5.4.3 Voltage drop test for grounded systems
Section 5.6.6.3 Polarity test
Section 5.10.2.1.1 Ground return path voltage rise for grounded systems (V1 Test: Gr to N voltage)
Section 5.10.2.1.2 Ground return path voltage rise (V2 Test: Ground conductor integrity under load)
Z32 Electrical Test SetFrom LD Cowley & Associates Ltd.
O r d e r O n l i n e f r o m :
L e a d i n g E d g e S a l e s . c a
Other Tests in the Standard:
Section 5.6.6.2 Retentive force testing criteriaIncluded: receptacle retention tester
Section 5.9 Voltage difference between ground pointsIncluded: specified filter for 20 mili-volt tests
Features & Equipment Certification:
No Software RequiredMS Excel is recommended for data entry
CalibrationEasily accomplished with a calibrated current meter (no third party testing required)
Interteck CertifiedInterteck Testing “Special Electrical Equipment Inspection” Certification
ComponentsAll components are CSA or equivalent certified and all components are soldered and “lock tighted” in positon
Replacement PartsIn the unlikely event that a part needs replacement, components are user replaceable and readily available
EnclosureEnclosed in sturdy Zarges case
Weight20 kg (with all components)
Set Includes:
Training Video
Operation manual including schematic drawings
125V 3 pin twist lock adapter for 30 amp tests
125V cord end with banana jacks for insulation testing
10K ohm and 470K ohm resistors for megohm meter verification ( 500VDC insulation tester is supplied with the test set or use your tester) Section 5.3 Conductor insulation integrity test
online: LeadingEdgeSales.ca email: [email protected] call: 1-866-313-9004
Z32 Electrical Test SetFrom LD Cowley & Associates Ltd.
Available from
Leading Edge SalesL e a d i n g E d g e S a l e s . c a
Order Online
$6495.00CAD+ G S T & S H I P P I N G