Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Summary
Demo and assembly guide: https://youtu.be/9Cofmy4bZX43d View: https://skfb.ly/6KoX8
Added a balloon remote for it:https://www.thingiverse.com/thing:3675568
If you like how it works, you can support me by purchasing one of thesebody kits:https://gum.co/vapemobile
The parts with "XX_..." names are optional.
All the parts fit onto 20x20cm table together and take about 8m (72g)of 1.75 filament to print. Solid infill, no supports needed.All printed well (and fast) with 0.6 nozzle at 0.2 layer height.
Extra parts needed:
623ZZ bearing (4x10mm, 3mm hole) (may poorly work without)Piece of 1.75mm filamentRubber bandThin plastic bag6mm silicon pipe (can be found in any aquarium shop)4mm pipe from intravenous dropper (or any that you could pull ontothe syringe end)Two 2ml syringes8mm piece of 4mm PTFE tube (optional)Air balloon
Slava Z.
Vapemobile:Pneumatic Toy Car
VIEW IN BROWSER
updated 17. 3. 2020 | published 13. 3. 2020
• • • • • •
• • • •
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
779.9 KBupdated 13. 3. 2020
1.9 MBupdated 13. 3. 2020
236.8 KBupdated 13. 3. 2020
Bolts: M3x6 x8, M3x8 x8, M3x10 x3, M3x12 x5, M3x14, M3x25,M3x50M3 washers x10M3 nuts x30
Toys & Games > Vehicles
toy steamengine remotecontrolled remotecontrol remote
pneumatic nsfw mechanical engine diy compressedair
car auto asthmatreatment
Category: Mechanical Toys Print Settings
Printer: Anet AM8
Rafts: No
Supports: No
Infill: Solid
Filament: Bestfilament PLA Gray
• •
xx_wheel_rear_l.stl
main_cylinder_half_2.stl
crank_gear_10t.stl
874.8 KBupdated 13. 3. 2020
74.1 KBupdated 13. 3. 2020
78.3 KBupdated 13. 3. 2020
589.0 KBupdated 13. 3. 2020
893.8 KBupdated 13. 3. 2020
1.8 MBupdated 13. 3. 2020
666.6 KBupdated 13. 3. 2020
68.8 KBupdated 13. 3. 2020
180.5 KBupdated 13. 3. 2020
axle_front.stl
main_cylinder_washer_1.stl
steering_rod.stl
crank_flywheel.stl
crank_gear_34t.stl
wheel_balloon_front_l.stl
remote_body.stl
main_cylinder_piston_washer.stl
frame_front.stl
637.5 KBupdated 13. 3. 2020
364.7 KBupdated 13. 3. 2020
63.9 KBupdated 13. 3. 2020
1.6 MBupdated 13. 3. 2020
337.0 KBupdated 13. 3. 2020
85.3 KBupdated 13. 3. 2020
1.6 MBupdated 13. 3. 2020
109.0 KBupdated 13. 3. 2020
106.3 KBupdated 13. 3. 2020
remote_thumb.stl
xx_crank_valve_smaller_hole.stl
main_cylinder_washer_2.stl
main_cylinder_6mm_pipe.stl
frame_body_airstream.stl
main_cylinder_rod.stl
xx_main_cylinder_6mm_pipe_no_ptfe.stl
valve.stl
x_remote_balloon_plate_04.stl
155.3 KBupdated 13. 3. 2020
788.4 KBupdated 13. 3. 2020
788.4 KBupdated 13. 3. 2020
364.3 KBupdated 13. 3. 2020
1.8 MBupdated 13. 3. 2020
1.2 MBupdated 13. 3. 2020
49.1 KBupdated 13. 3. 2020
106.3 KBupdated 13. 3. 2020
299.9 KBupdated 13. 3. 2020
remote_pipe_clip.stl
xx_wheel_front_l.stl
xx_wheel_front_r.stl
crank_valve.stl
wheel_balloon_front_r.stl
xx_main_cylinder_4mm_pipe.stl
valve_rod.stl
x_remote_balloon_plate_02.stl
axle_rear.stl
95.7 KBupdated 13. 3. 2020
116.2 KBupdated 13. 3. 2020
1.1 MBupdated 13. 3. 2020
58.1 KBupdated 13. 3. 2020
2.0 MBupdated 13. 3. 2020
661.3 KBupdated 13. 3. 2020
1.8 MBupdated 13. 3. 2020
951.1 KBupdated 13. 3. 2020
364.3 KBupdated 13. 3. 2020
xx_crank_no_bearing_spacer.stl
main_cylinder_shaft_end.stl
steering_rod_cover.stl
xx_main_cylinder_shaft_18mm.stl
wheel_balloon_rear_r.stl
remote_balloon_thumb_v1.stl
wheel_balloon_rear_l.stl
xx_wheel_rear_r.stl
frame_main.stl
124.4 KBupdated 13. 3. 2020
337.0 KBupdated 13. 3. 2020
654.9 KBupdated 13. 3. 2020
626.1 KBupdated 13. 3. 2020
424.4 KBupdated 13. 3. 2020
383.5 KBupdated 13. 3. 2020
527.8 KBupdated 13. 3. 2020
1.1 MBupdated 13. 3. 2020
Find source .stl files on Thingiverse.com
main_cylinder_piston.stl
xx_frame_body_airstream.stl
remote_balloon_thumb_v2.stl
steering_clamp.stl
remote_balloon_tube.stl
remote_pipe.stl
remote_balloon_trigger.stl
remote_balloon_handle.stl
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition