Y UniFi AP-AC-LR - Stand...Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES 957.4 KB updated 25. 3. 2020 Summary As I didn't want to mount the access point (UniFi AP-AC-LR)

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

957.4 KBupdated 25. 3. 2020

Summary

As I didn't want to mount the access point (UniFi AP-AC-LR) to the wall orceiling, I have created a stand for it. 4 x M4 screws are required to mountthe stand to the access point. No nuts are required.

Hobby & Makers > Electronics

S Stefan Riese

UniFi AP-AC-LR -Stand

VIEW IN BROWSER

updated 25. 3. 2020 | published 25. 3. 2020

unifi_ap_ac.stl

3D M

ODEL

ONLY

https://www.prusaprinters.org/social/14105/prints





https://www.prusaprinters.org/prints/26906-unifi-ap-ac-lr-stand

https://www.prusaprinters.org/prints/26906-unifi-ap-ac-lr-stand

https://www.prusaprinters.org/prints?categoryId=48

https://www.prusaprinters.org/prints?categoryId=52

https://www.prusaprinters.org/prints/26906-unifi-ap-ac-lr-stand/files










The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

https://www.prusaprinters.org/prints/26906-unifi-ap-ac-lr-stand/user-gcodes

http://creativecommons.org/licenses/by-nc/4.0/






Documents

Y UniFi AP-AC-LR - Stand...Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES 957.4 KB updated 25. 3. 2020 Summary As I didn't want to mount the access point (UniFi AP-AC-LR)