Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Summary
This is my clip on umbrella light. There are 4 versions of this clamp inside.There is a tilted and straight version both with a solid or open bottom.They will light up your patio umbrella and look spectacular.
The "Open" version on the bottom use these special remote controlled LEDtea lights. They simply press into the bottom but have the advantage ofbeing remote controlled with various color options with a dedicated whiteLED.
You can point these up or down the umbrella pole depending on the lightyou need.
The other version has a closed bottom so you can place any sort oftealight in it. I have used these tea lights successfully on many projectsand they are very inexpensive.
I printed these at 100% infill with supports. The supports break off. The100% infill on the clear holders transfers the light much better.
Makers Mashup
Umbrella Light foryour Deck or Patio
VIEW IN BROWSER
updated 6. 1. 2020 | published 6. 1. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
416.3 KBupdated 4. 1. 2020
326.9 KBupdated 4. 1. 2020
402.7 KBupdated 4. 1. 2020
See this light in action
Need more help building this? Want to discuss it? I can be found on my public discord chat server. Glad to answer any questions you have.
Suggestions?
If you have suggestions for me to build please message me. I'm alwayslooking to build something exciting and new. You can message me here onThingiverse or contact me through My Blog or my Youtube Channel
Household > Outdoor & Garden
umbrella patioumbrella patio lighting ledlight ledholder
led deck
Category: Outdoor & Garden Print Settings
Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .15 Infill: 100% Notes:
I printed these at 100% infill with supports. The supports break off. The100% infill on the clear holders transfers the light much better.
umbrella_tealight_-_straight_-_solid_bottom_v1.stl
umbrella_tealight_-_tilted_-_solid_bottom_v1.stl
umbrella_tealight_-_tilted_v1.stl
411.5 KBupdated 4. 1. 2020
Find source .stl files on Thingiverse.com
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—NoDerivates
✖ | Sharing without ATTRIBUTION ✖ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
umbrella_tealight_-_straight_v1.stl