Upload
others
View
47
Download
1
Embed Size (px)
Citation preview
Summary
This is remix from https://www.prusaprinters.org/prints/17584-bondtech-bmg-prusa-mk3smk25s-v2-fdm-printable-rhd- for Dragon Hotend withoutaluminium adapter similar like E3D v6
This is a quick conversion, so please comment if there is a problem.
I'm waiting for parts for Prusa Bear so I haven't tested this extruder yet.
3D Printers > 3D Printers - Upgrades
trianglelab mosquito hotend extruder dragon bmg
This remix is based on
Bondtech BMG Prusa MK3S/MK2.5S v2 FDM printable +RHD ver.C fan Shroud
by MarcoZ76
M Marvin27
MZ76 BondtechBMG v2 for DragonHotend
VIEW IN BROWSER
updated 28. 3. 2020 | published 28. 3. 2020
3D M
ODEL
ONLY
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
237.6 KBupdated 28. 3. 2020
1.3 MBupdated 28. 3. 2020
2.0 MBupdated 28. 3. 2020
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (International License)
Public Domain
✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
dragon_hotend_adapter_bmg_mk3s.stl
prusa_housing_front_dragon_hotend.stl
prusa_housing_rear_mk3s_dragon_hotend.stl