Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
772.2 KBupdated 4. 6. 2019
Summary
I have small space to operate with so I required something small to fit thedrawer and hold all the nozzles. Probably not a good pick if you changenozzles often. I included also separate text to go with the clean nozzleholder for multicolor printing and F360 file shall you need to do anychanges to number of rows, columns or you want to customize the text.
3D Printers > Other Accessories
nozle tray holder
Print in PETG, 100% infill.
S Smurf
Minimalistic NozzleTray/Holder
VIEW IN BROWSER
updated 4. 6. 2019 | published 4. 6. 2019
nozle-holder_clear.stl
3D M
ODEL
ONLY
352.2 KBupdated 4. 6. 2019
947.8 KBupdated 4. 6. 2019
The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution—Noncommercial—Share Alike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
nozle-holder-text.stl
nozle_holder.stl