Summary

I created this remix of the Prusa Face Shield RC3 for a family member. Shewanted the convenience of a face shield that she can flip out of her facewhen she doesn't need it. But she wanted the extra protection provided bythe Design That Matters design upper shield.

I swiped the brow shield from the "RC3 + DtM Face Shield Combination"model by IBG 3D Printing Hub, then pasted and resized it to fit onto the"Rotating Prusa Face Shield - US Version" model by Cavy.

Credit to the original designs below:

www.prusaprinters.org/prints/27950-prusa-face-shield-us-versionwww.prusaprinters.org/prints/30081-rotating-prusa-face-shield-us-versionwww.prusaprinters.org/prints/29446-rc3-dtm-face-shield-combination

Healthcare > Accessibility

shield ppe faceshield facemask covid19

The file contains all 3 printable pieces needed to assemble the mask. I alsoadded some custom support blocks that may not be necessary, but I didn'twant to risk my 3 1/2 hour print.

B BrianHanifin

Flip Up Face Shieldplus BrowProtection

VIEW IN BROWSER

updated 28. 4. 2020 | published 28. 4. 2020

• •

•

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

413.0 KBupdated 28. 4. 2020

1.5 MBupdated 28. 4. 2020

Find source .stl files on Thingiverse.com

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

flip-up-face-shield-plus-brow-protection.3mf

flip-up-face-shield-plus-brow-protection.stl