Y Beach Umbrella Clamp - PrusaPrinters · A replacement part for beach umbrella clamp. I designed this part to replace the broken quick release clamp. The diameter of the big tube

Stamos

Beach UmbrellaClamp

VIEW IN BROWSER

updated 3. 6. 2019 | published 3. 6. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

4.2 MBupdated 3. 6. 2019

PRUSAPRINTERS

Summary

A replacement part for beach umbrella clamp. I designed this part toreplace the broken quick release clamp. The diameter of the big tube is32mm and the smaller (that goes into the big one) 29mm. Design isavailable in Onshape if you want to modify dimensions according to yourumbrella's poll and your printer's tolerances.

Seasonal designs > Summer

umbrella clamp

umbrella-clamp.stl

3D M

ODEL

ONLY

https://www.prusaprinters.org/social/2964/prints





https://www.prusaprinters.org/prints/3442-beach-umbrella-clamp

https://www.prusaprinters.org/prints/3442-beach-umbrella-clamp

https://cad.onshape.com/documents/1044453bff2a17b881d43b5f/w/1b1904d9aa72818e4a208d1c/e/1a46a3bab9b3a0a7964ae307

https://www.prusaprinters.org/prints?categoryId=65

https://www.prusaprinters.org/prints?categoryId=71

#

#

#

#

https://www.prusaprinters.org/prints/3442-beach-umbrella-clamp/files










3.2 MBupdated 3. 6. 2019

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

umbrella-clamp-bolt.stl






https://www.prusaprinters.org/prints/3442-beach-umbrella-clamp/user-gcodes

http://creativecommons.org/licenses/by-nc-sa/4.0/






Documents

Y Beach Umbrella Clamp - PrusaPrinters · A replacement part for beach umbrella clamp. I designed this part to replace the broken quick release clamp. The diameter of the big tube