Curriculum Vitae **********************************************

Dr. Arun Kumar Tiwari Ph.D (Thermal and Fluid Engg.) Associate Professor/Training and Placement officer Mechanical Engineering Department Institute of Engineering & Technology Lucknow-226021

E-mail: aruntiwari@ietlucknow.ac.in Mobile: +91-9452109343, 9690023299 scholar.google.co.th/citations?user=JycM1rEAAAAJ&hl=th

Emails: arun_tiwari25@yahoo.co.in, aruntiwari@ietlucknow.ac.in Broad area of specialization: Mechanical Engineering Specific areas of specialization: Nanofluids, Solar Thermal, Heat exchanger. Academic Credentials:

Ph.D. IIT (BHU), Varanasi M.Tech. IIT-Roorkee B.Tech. BIET, Jhansi Professional Experience: Associate Professor, Department of Mechanical Engineering, I.E.T, lucknow (2017– contd.) Professor, Department of Mechanical Engineering, GLA University, Mathura (2016–2017) Associate Professor, Department of Mechanical Engineering, GLA University, Mathura (2013–2016) Reader, Department of Mechanical Engineering, GLA University, Mathura (2009 –2013). Lecturer, Department of Mechanical Engineering, GLAITM, Mathura (2004 –2009)

Administrative Responsibilities: Co-Convenor,Board of Studies, Dr APJ Abdul Kalam Technical University, Lucknow (2017–contd.) Co-coordinator, TEQIPIII, Institute of Engineering & Technology, Lucknow (2017–contd.) Training & Placement officer, Institute of Engineering & Technology, Lucknow (2017–contd.) Associate Dean (DSW), Dr APJ Abdul Kalam Technical University, Lucknow (2017–2018.) Warden, Bhabha Hostel, Institute of Engineering & Technology, Lucknow (2017–contd.) Associate Dean(Research & Development), GLA University, Mathura. (2016–2017) Member, IQAC, GLA University, Mathura. (2016–2017.) Coordinator, Accreditation committee Mechanical Engineering (NAAC) (2015–2017.) Member, BOS, BIET Jhansi (2013–2017.) Member, BOS, GLA University, Mathura. (2013–2017) Member, Academic council, GLA University, Mathura. (2013–2017) Member, Research Promotion Cell,(2013–2017) Member, DRC,(2013–2017) Incharge, Fluid Mechanics and Fluid Machines Lab(2004–2017.) Member, Ph.D Admission committee,(2013–2017) UG Project co-ordinator(2004–2010)

DETAILS OF Ph.D. THESIS SUPERVISED/BEING SUPERVISED Awarded=04 In progress=02 Sujeet Kumar Verma, Performance analysis of solar collector using nanofluids, at G.L.A University Mathura. in Joint Guidence with Prof D.S. Chauhan Vice-Chancellor G.L.A University Mathura (Awarded 2017). Anuj Kumar Sharma, An investigation on performance of hybrid nanoparticle enriched cutting fluids in turning operation, at IIT(ISM) Dhanbad in Joint Guidence with Dr. A. R. Dixit, Department of Mechanical Engineering, IIT(ISM) Dhanbad (Awarded 2017).

Vikas Kumar, Experimental investigation on the heat transfer enhancement of hybrid nanofluids in a plate heat exchanger at IIT(ISM) Dhanbad in Joint Guidence with Dr. S. K. Ghosh, Department of Mechanical Engineering, IIT(ISM) Dhanbad (Awarded 2017). Naveen Kumar Gupta, Experimental investigation of nanofluids on heat pipe thermal performance at IIT(ISM) Dhanbad in Joint Guidence with Dr. S. K. Ghosh, Department of Mechanical Engineering, IIT(ISM) Dhanbad. (Awarded 2018).

DETAILS OF M.TECH. DISSERTATION SUPERVISED/BEING SUPERVISED: Awarded=08 In progress =04

S.N Name of Student Title of Dissertations Year of Award

1 Pawan Kumar Agrawal Thermal analysis of flat plate solar collector using nanofluids

2015

2 Divyanshu Kumar Performance of heat exchanger using nanofluids

2015

3 Abdal Ahmed

Performance evaluation of mesh wick heat pipe using ZnO/water nanofluid.

2018

4 Aman Kumar

Energetic and exergetic performance of plate heat exchanger.

2018

5 Amardeep Sheel

Analysis of parabolic trough solar collector using TiO2/water nanofluid.

2018

6 Arvind Singh

Analysis of photovoltaic thermal system using nanofluid silica/water.

2018

7 Deepak Kumar

Experimental and numerical analysis of plate heat exchanger using TiO2-MWCNT/water hybrid nanofluid.

2018

8 Dharmendra Sharma

Thermal analysis of flat plate solar collector using nano fluid.

2018

Achievements and Awards: GATE qualified. All India Residential Scholarship awarded by Govt. of India. Reviewer, International Journal of Heat and Mass Transfer (Elsevier Publications). Reviewer, Renewable & Sustainable Energy Reviews (Elsevier Publications). Reviewer, Energy Conversion and Management (Elsevier Publications). Reviewer, Experimental Heat Transfer (Taylor & Francis Publications). Reviewer, Neural Computing and Applications (Springer Publications). Reviewer, Heat Transfer - Asian Research (Wiley Publications). Reviewer, Applied Thermal Engineering (Elsevier Publications). Reviewer, Powder Technology (Elsevier Publications). Reviewer, Journal of Mechanical Engineering Science Reviewer, Energy (Elsevier Publications). Reviewer, Heat Transfer Research Reviewer, International Journal of Exergy

Research Projects:

S.N. Title of the Project Funding Agency

Duration Grant/Amount mobilized (Rs. lakhs)

Principal Investigator

Ongoing/

Completed*

From To

1 Performance of solar collector using nanofluids

GLA University Mathura

May,2014 April,2017 5.9 Arun Kumar Tiwari

Completed

2 Study on direct absorption collector based on nanofluids

GLA University Mathura

July,2015 June,2017 11.175 Arun Kumar

Tiwari

Completed

3 Role of nanofluids in augmenting the thermal performance of solar collectors

GLA University Mathura

Jan.2017 Dec.2018 21.0 Arun Kumar

Tiwari

Completed

4 Investigation of heat transfer and pressure-drop characteristics of hybrid nanofluids in double-tube and plate heat exchanger

GLA University Mathura

Jan.2017 Dec.2018 12.0 Arun Kumar

Tiwari

Completed

Publication Highlights: Total Publication= 83 (Journals 49+ Conference 34) Journals: Book Chapter=02 SCI Journals Published: 29 Scopus Journals Published: 18 Total SCI/ Scopus Published: 49 (2+29+18) Conference: International Conference: 27 National Conference: 07 Citation Report: https://scholar.google.co.in/citations?user=JycM1rEAAAAJ&hl=en Total Citation: 1141 (Status as on 10.02.2019), Source : Google Scholar Citation h-index: 19 i10-index: 24 ********************************************************************************* 2018 [47] Verma S.K.,Tiwari A.K., Tripathi M., An evaluative observation on impact of optical properties of nanofluids in performance of photo-thermal concentrating systems, Solar Energy 176 (2018) 709-724, Publisher: Elsevier (SCI). Impact factor: 4.018. [46]S,Sharma, Tiwari A.K. Tiwari S, Prakas R., Viscosity of hybrid nanofluids:Measurement and comparision, Journal of Mechanical Engineering and Sciences 12(2018)3614-23 (Scopus).

[45] Singh R.K., Sharma A.K., Dixit A.R., Tiwari A.K., Pramanik A.,Mandal A., Influence of graphene and multi-walled carbon nanotube additives on tribological behaviour of lubricants,Int. J. Surface Science and Engineering, Publisher:Inderscience.12 (3),207-227,2018 (SCI). Impact factor: 1.377.

[44] Gupta N.K., Tiwari A.K., Ghosh S.K, Experimental study of thermal performance of nanofluid-filled and nanoparticles-coated mesh wick heat pipes, Journal of Heat Transfer, Transactions of ASME, 140(10)102403, 2018, (SCI). [43] Gupta N.K., Tiwari A.K., Ghosh S.K, Experimental Investigation of Mesh Wick Heat Pipe, Heat Transfer Research, Publisher:Begell House. 49(18)2018, (SCI). [42] Sharma, A.K., Tiwari, A.K. , Dixit, A.R. Prediction of temperature distribution over cutting tool with alumina-MWCNT hybrid nanofluid using computational fluid dynamics (CFD) analysis Int J Adv Manuf Technol 97(2018) 427-439. Publisher:Springer (SCI).Impact factor: 2.209. [41] Kumar V, Tiwari A.K., Ghosh S. K., Exergy analysis of hybrid nanofluids with optimum

concentration in a plate heat exchanger,Materials Research Express 5(6),2018 (SCI).

[39] Verma S.K.,Tiwari A.K., Tiwari S., Chauhan D.S., Performance analysis of hybrid nanofluids in flat plate solar collector as an advanced working fluid, Solar Energy 167 (2018) 231-241, Publisher: Elsevier (SCI). Impact factor: 4.018.

[38] Sharma A.K.,Tiwari A.K., Dixit A.R., Dixit A.R., Singh M., Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation, tribology international 119( 2018) 99-111,Publisher: Elsevier (SCI). Impact factor: 2.903

[37] Gupta N. K., Tiwari A.K., Ghosh S. K., Heat transfer mechanisms in heat pipes using nanofluids-A-Review, Experimental Thermal and Fluid Science, 90 (2018) 84–100,Publisher: Elsevier (SCI). Impact factor: 2.830

[36]Singh A.K.,Tiwari A.K.,,Analysis Of Solar Photovolatic Thermal System Using Nanofluid SiO2/H2O,International journal of Mechanical Engineering& Technology,Vol9,Issue 9,Sept 2018. (Scopus).

[35]Kumar D, Tiwari A.K., CFD Simulation Of Plate Heat Exchanger Using hybrid Nanofluid, International journal of Mechanical Engineering& Technology,Vol9, Issue 9,Sept 2018. (Scopus).

[34]Sharma D, Tiwari A.K., Thermal Performance of CeO2-water Nanofluid In Flat Plate Plate Solar Collector,International journal of Mechanical Engineering & Technology,Vol9,Issue 9,Sept 2018. (Scopus).

[33]Ahmad, Tiwari A.K., Effect Of Inclination Angle In Performance Evaluation Of Heat Pipe With Zinc Oxide Nanofluid,International journal of Mechanical Engineering& Technology,Vol9, Issue 9,Sept 2018. (Scopus).

[32] Aman Kumar,Tiwari A.K., Sinha S.,Energetic And Exergetic Performance Of Plate Heat Exchanger,International Journal of Mechanical Engineering & Technolog , Vol 9 Issue 9,sept 2018. (Scopus).

[31]Sheel A.D., Tiwari A.K., Sinha S., Analysis of Parabolic Trough Solar Collector Using TiO2 /Water Nanofluid, International Journal of Mechanical Engineering & Technology,Vol 9 Issue 9,sept 2018. (Scopus).

*********************************************************************************2017

[30] Sharma A.K.,Singh R.K., Dixit A.R., Tiwari A.K., Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel, Journal of Manufacturing Processes 30 (2017) 467–482, Publisher: Elsevier (SCI). Impact factor: 2.322.

[29] Singh R.K., Sharma A.K., Dixit A.R., Tiwari A.K., Pramanik A.,Mandal A., Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning, Journal of Cleaner Production 162 (2017) 830-845, Publisher: Elsevier (SCI). Impact factor: 5.715.

[28] Verma S.K.,Tiwari A.K., Chauhan D.S., Experimental evaluation flat plate collector using nanofluid , Energy Conversion and Management 134 (2017) 103-115, Publisher: Elsevier (SCI). Impact factor: 5.472. [27] Kumar V, Tiwari A.K., Ghosh S. K., Characterization and performance of nanofluids in plate heat exchanger, Materials Today: Proceedings -Scopus, Publisher: Elsevier, 2017, [26] Singh R.K., Sharma A.K., Dixit A.R., Tiwari A.K., Mandal A, Preparation and characterization of nanoparticles mixed cutting fluids, Advanced Materials Proceedings,Scopus, Publisher: Elsevier, 2017, [25] Verma S.K.,Tiwari A.K, Characterization of Nanofluids as an advanced heat transporting medium for Energy Systems, Materials Today: Proceedings-Scopus, Publisher: Elsevier, 2017, [24] Sharma A.K.,Tiwari A.K., Dixit A.R, Investigation into Performance of SiO2 Nanoparticle Based Cutting Fluid in Machining Process, Materials Today: Proceedings-Scopus, Publisher: Elsevier, 2017, [23] Singh R.K.,Sharma A.K., Dixit A.R., Tiwari A.K, Experimental investigation of thermal conductivity and specific heat of nanoparticles mixed cutting fluids, Materials Today: Proceedings -Scopus, Publisher: Elsevier., 2017, ********************************************************************************* 2016 [22] Kumar V, Tiwari A.K., Ghosh S. K., Effect of variable spacing on performance of plate heat exchanger using nanofluids, Energy 114(2016) 1107-1119, Publisher: Elsevier (SCI). Impact factor: 4.520.

[21] Verma S.K.,Tiwari A.K., Chauhan D.S., Performance augmentation in flat plate solar collector using MgO/water nanofluid, Energy Conversion and Management 124 (2016) 607-617, Publisher: Elsevier (SCI). Impact factor: 5.472.

[20] Sharma A.K.,Tiwari A.K.,Dixit A.R., Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A review, Journal of Cleaner Production 127 (2016) 1-18, Publisher: Elsevier (SCI). Impact factor: 5.715.

[19] Kumar V, Tiwari A.K., Ghosh S. K., Effect of chevron angle on heat transfer performance in plate heat exchanger using ZnO/water nanofluid, Energy Conversion and Management 118(2016)142–154,Publisher: Elsevier (SCI). Impact factor: 5.472.

[18] Sharma A.K.,Tiwari A.K.,Dixit A.R., Rheological Behaviour of Nanofluids: A Review, Renewable & Sustainable Energy Reviews, 53(2016)779–791,Publisher: Elsevier (SCI).Impact factor: 8.050.

[17] Sharma A.K.,Tiwari A.K., Dixit A.R, Characterization of TiO2, Al2O3 and SiO2 Nanoparticle based Cutting Fluids, Materials Today: Proceedings-Scopus, Publisher: Elsevier, 2016, [16] Sharma A.K, Singh R. B, Dixit A.R,Tiwari A.K., Characterization and Experimental investigation of Al2O3 nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quantity lubrication (MQL)., Materials Today: Proceedings -Scopus, Publisher: Elsevier, 2016, [15] Sharma A.K.,Tiwari A.K., Singh R. B, Dixit A.R, Tribological investigation of nanoparticle enriched cutting fluid in machining, Materials Today: Proceedings -Scopus, Publisher: Elsevier., 2016, *********************************************************************************

2015 [14] Kumar V, Tiwari A.K., Ghosh S. K.,application of nanofluids in plate heat exchanger: a review, Energy Conversion and Management 105 (2015) 1017–1036, Publisher: Elsevier (SCI). Impact factor: 5.472.

[13] Sharma A.K.,Tiwari A.K., Dixit A.R., Progress of nanofluids application in machining: A review, Materials and Manufacturing Processes, 30(2015) 813–828 Publisher: Taylor & Francis (SCI), Impact factor: 1.419. [12] Tiwari A.K., Ghosh P., Sarkar J., Particle concentration levels of various nanofluids in plate heat exchanger for best performance, International Journal of Heat and Mass Transfer 89(2015) 1110–1118, Publisher: Elsevier Science (SCI). Impact factor: 3.458.

[11] Verma S.K.,Tiwari A.K., Progress of Nanofluid Application in Solar Collectors: A Review, Energy Conversion and Management 100 (2015) 324–346, Publisher: Elsevier (SCI). Impact factor: 5.472.

[10] Sharma A.K.,Tiwari A.K.,Dixit A.R., Mechanism of Nanoparticles functioning and Effects in Machining Processes: A Review., Materials Today: Proceedings -Scopus, Publisher: Elsevier., 2015, [9] Verma S.K.,Tiwari A.K, Application of Nanoparticles in Solar collectors: A Review, Materials Today: Proceedings-Scopus, Publisher: Elsevier, 2015, [8] Bajaj, R.,Tiwari A.K., Dixit A.R, Current trends in electric discharge machining using micro and nano powder materials- A Review., Materials Today: Proceedings -Scopus, Publisher: Elsevier., 2015, [7] Sharma A.K.,Tiwari A.K., Dixit A.R, Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique- A Review, Materials Today: Proceedings -Scopus, Publisher: Elsevier, 2015, *********************************************************************************

2014

[6] Tiwari A.K., Ghosh P., Sarkar J., Experimental investigation on combined energetic and exergetic performances of a corrugated plate heat exchanger, International Journal of Exergy, 15 (2014) 395-411, (SCI), Publisher:Inderscience. Impact factor: 1.377. [5] Tiwari A.K., Ghosh P., Sarkar J. Dahiya H., Parekh J., Numerical investigation of heat transfer and fluid flow in plate heat exchanger using nanofluids, International Journal of Thermal Sciences (SCI), 85 (2014) 93-103,Publisher:Elsevier. Impact factor: 3.615 (ranked 2th on the science direct top 25 most downloaded papers of the journal).

********************************************************************************

2013

[4] Tiwari A.K., Ghosh P., Sarkar J., Solar water heating using nanofluids- a comprehensive overview and environmental impact analysis, International Journal of Emerging Technology and Advanced Engineering, 3(3), 221-224, 2013.

[3] Tiwari A.K., Ghosh P., Sarkar J., Investigation of thermal conductivity and viscosity of nanofluids, Journal of Environmental Research and Development, 7(2),768-777, 2012. Impact factor: 4.301.

[2] Tiwari A.K., Ghosh P., Sarkar J., Heat transfer and pressure drop characteristics of CeO2/water nanofluid in plate heat exchanger, Applied Thermal Engineering, 57 (2013) 24-32 Publisher: Elsevier (SCI). Impact factor: 3.356. [1] Tiwari A.K., Ghosh P., Sarkar J., Performance comparison of the plate heat exchanger using different nanofluids, Experimental Thermal and Fluid Science, 49 (2013) 141-151 Publisher: Elsevier (SCI). Impact factor: 2.830. (Consecutive three times ranked 5th, 8th and 17th on the sciencedirect top 25 most downloaded papers of the journal).

Conference papers presented/communicated: [34] Gupta N. K., Tiwari A. K., Ghosh S. K., Application of hybrid nanofluids in heat pipe – An experimental study, First International Conference on Energy & Environment: Global Challenges-ICEE-2018, 09-10 March, 2018, NIT, Calicut. [33] Gupta N. K., Agrawal S., Tiwari A. K., Ghosh S. K., Effects of CeO2/H2O Nanofluid application on thermal performance of mesh wick heat pipe, First International Conference on Energy & Environment: Global Challenges-ICEE-2018, 09-10 March, 2018, NIT, Calicut.

[32] Gupta N.K., Tiwari A.K., Ghosh S.K., “Effects of TiO2/H2O Nano fluid application on thermal performance of mesh wick heat pipe” International Conference on Nanotechnology: Ideas, Innovation & Initiatives - 2017, Paper Id- Div. Appl._319-ICN3I, IIT, Roorkee, Dec. 06-08, 2017. [31] Gupta N.K., Tiwari A.K., Ghosh S.K.,Progress in application of nanofluids in heat pipes- A review,International Conference on Frontiers in Engineering, Applied Sciences and Technology,31st March & 1st April, 2017,NIT Trichi, Tiruchirappalli-620015. [30] Gupta N.K., Tiwari A.K., Ghosh S.K.,Experimental Investigation of thermal efficiency of thermosyphon heat pipe,International Conference on Frontiers in Engineering, Applied Sciences and Technology,31st March & 1st April, 2017,NIT Trichi, Tiruchirappalli-620015 [29] Barua A, Gupta N.K., Tiwari A.K., Ghosh S.K., Numerical study on CeO2 /H2O nanofluid application on thermal performance of heat pipe, International Conference on Nanotechnology: Ideas, Innovation & Initiatives – 2017, IIT, Roorkee, Dec. 06-08, 2017. [28] Mishra S., Gupta N.K., Tiwari A.K., Ghosh S.K., A review of thermo physical properties of nanofluids, International Conference on Nanotechnology: Ideas, Innovation & Initiatives – 2017, IIT, Roorkee, Dec. 06-08, 2017.

[27] Sharma A.K., Tiwari A.K., Dixit A.R., Investigation into Performance of SiO2 Nanoparticle Based Cutting Fluid in Machining Process:4th International conference on Materials processing and

characterization, GRIET Hyderabad, India, 12th -13th March 2016, Materials Today: Proceedings, Publisher: Elsevier.

[26] Kumar.V.,Tiwari A.K.,Ghosh S.K., Characterization and performance of nanofluids in plate heat exchanger: 4th International conference on Materials processing and characterization, GRIET Hyderabad, India, 12th -13th March 2016, Materials Today: Proceedings, Publisher: Elsevier.

[25] Verma S.K.,Tiwari A.K., Characterization of Nanofluids as an advanced heat transporting medium for Energy Systems.:4th International conference on Materials processing and characterization, GRIET Hyderabad, India, 12th -13th March 2016, Materials Today: Proceedings, Publisher: Elsevier. [24] Kumar.V.,Tiwari A.K.,Ghosh S.K., Heat transfer augmentation in plate heat exchanger using nanofluid: 17th Indian Society of Mechanical Engineers (ISME) Conference on Advances in Mechanical Engineering, IIT Delhi, India, October 3rd-4th, 2015.

[23]Verma S.K.,Tiwari A.K.,Performance Analysis of Flat-Plate Solar Collector using Nanofluids :International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama University, India, July 8th-10th,Materials Today: Proceedings, Publisher: Elsevier. [22] Sharma A.K.,Tiwari A.K.,Dixit A.R., Characterization of TiO2, Al2O3 and SiO2 Nanoparticle based Cutting Fluids: International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama University, India, July 8th-10th,Materials Today: Proceedings, Publisher: Elsevier.

[21] Sharma A.K., Singh R, K., Dixit A.R., Tiwari A.K., Characterization and Experimental investigation of Al2O3 nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quantity lubrication (MQL): International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama University, India, July 8th-10th, Materials Today: Proceedings, Publisher: Elsevier.

[20] Sharma A.K., Singh R, K., Dixit A.R., Tiwari A.K.,Tribological investigation of nanoparticle enriched cutting fluid in machining: International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama University, India, July 8th-10th, Materials Today: Proceedings ,Publisher: Elsevier. [19] Bajaj R.,Tiwari A.K.,Dixit A.R., Progress of micro/nano powder mixed electric discharge machining: A Review: International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama University, India, July 8th-10th,Materials Today: Proceedings,Publisher: Elsevier.

[18] Verma S.K.,Tiwari A.K., Application of Nanoparticles in Solar collectors: A Review, 4th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015) 3638–3647 ,Publisher: Elsevier.

[17] Bajaj R.,Tiwari A.K.,Dixit A.R., Current trends in electric discharge machining using micro and nano powder materials- A Review, 4th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015 ) 3302–3307,Publisher: Elsevier.

[16] Sharma A.K.,Tiwari A.K.,Dixit A.R., Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique- A Review,4th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015) 3545–3551,Publisher: Elsevier.

[15] Sharma A.K.,Tiwari A.K.,Dixit A.R., Mechanism of Nanoparticles functioning and Effects in Machining Processes:A Review, 4th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015) 3539 – 3544,Publisher: Elsevier. [14] Verma S.K.,Tiwari A.K., application of nanofluids in direct absorbing solar collector: a review: International Conference On Science Technology & Management, YMCA, New Delhi, 1 Feb. 2015.

[13] Vikas Kumar, Tiwari A.K.,, Subrata Kumar Ghosh Implementation of nanofluids in plate heat exchanger: A Review : International Conference On Science Technology & Management, YMCA, New Delhi, 1 Feb. 2015. [12] A.K.,Tiwari.,Thermal performance of shell and tube heat exchanger using nanofluids:2nd

International Conference on Recent Devlopement In Mechanical,Production,Industrial and Automobile Engineering(ICMPIAE 2015),Chandigarh, India, 4th January 2015. [11] A.K.,Tiwari., Enhancement of heat transfer by using nanofluids in a heat exchanger:2nd

International Conference on Recent Devlopement In Mechanical,Production,Industrial and Automobile Engineering(ICMPIAE 2015),Chandigarh, India, 4th January 2015. [10] D. Kumar, A.K. Tiwari, S. Verma, Thermal analysis using nanofluid in a shell & tube heat exchanger–a review: 4th International conference on emerging paradigms and practices in global technology, National Institute of Technology (NIT), Hamirpur, India, 22th -24th December 2014.

[9] P.K.Agrawal, A.K. Tiwari, S. Verma, Improvement of efficiency of flat-plate solar collector using nanofluids in a solar water heater system: 4th International conference on emerging paradigms and practices in global technology, National Institute of Technology (NIT), Hamirpur, India, 22th -24th December 2014.

[8] A.K. Tiwari, V. Kumar, P. Ghosh, J. Sarkar, Energetic and exergetic performances of Al2O3/water nanofluid in plate heat exchanger: Proceedings of the 22th National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India.

[7] A.K. Tiwari, P. Ghosh, J. Sarkar, Solar water heating using nanofluids- a comprehensive overview and environmental impact analysis: International Conference on Energy Resources and Technologies for Sustainable Developmen, BES Univesity Shibpur Howrah, India., 07-09 February 2013.

[6] V. Kumar, A.K. Tiwari, Numerical Investigation of Plate Heat Exchanger, in: A National Conference On Emerging Trends in Mechanical & Electrical Engineering (paper code – ME-222),Integral University Lucknow-226026 (U.P.) India, June 12-13, 2012. [5] A.K. Tiwari, P. Ghosh, J. Sarkar, A review on application of nanofluids in solar water heating systems, in: A National Conference On Advances in Mechanical Engineering & Emerging Technologies (paper code - S01:17 AMEET-054), Kamla Nehru Institute of Technology (K. N. I.T) Sultanpur 228118 (U.P.) India, April 07-08, 2012. [4] V. Kumar, A.K. Tiwari, Application and challenges of nanofluids, in: A National Conference On Advances in Mechanical Engineering & Emerging Technologies (paper code - S01:28 AMEET-075), Kamla Nehru Institute of Technology (K. N. I.T) Sultanpur 228118 (U.P.) India, April 07-08, 2012.

[3] A.K. Tiwari, P. Ghosh, J. Sarkar, Performance analysis of a flat plate solar collectors using Al2O3/water nanofluid in: An International Conference on Energy Security, Global Warming and Sustainable Climate, Banaras Hindu University (BHU), Varanasi,India, February 07-09, 2012.

[1] A. K. Tiwari, P. Ghosh, J. Sarkar, Modeling of Thermal Conductivity of Al2O3/water Nanofluid using Neural Network, in: National Conference on Artificial Intelligence: Agent, Theory and Applications, AIATA-2011, IIT (BHU), Varanasi,India, 9th -11th December 2011, pp. 427-430.

Workshop/Conference attended:

Attended One Week TEQIP-II Sponsored National Workshop on Advanced Computational Fluid Dynamics ACFD-2014 Organised by Department of Applied Mechanics MNNIT Allahabad,28June-02July, 2014 Attended Two Week ISTE Workshop on Fluid Mechanics Organised by IIT Kharagpur through National Mission on Education (MHRD,Govt. of India),20 May- May 30,2014. Attended seven days Workshop on “Technical Communication For Research Scholars” Organised by Department of Extension Education, Institute of Agricultural Science, Banaras Hindu University (BHU), Varanasi,India, May 05-11, 2012. Attended three days conference in: Conference on Mechanical Engineering and technology (COMET 2012) ,Department of Mechanical Engineering, IIT (BHU), Varanasi,India, March 02-04, 2012. Attended two days conference in: 25th National Convention of metallurgical and materials engineers (IEI) and national seminar “Design and development of materials for advanced technologies”(DMAT-2012),Department of Metallurgical Engineering, IIT (BHU), Varanasi,India, January 23-24, 2012.

References

Prof. V. P. Singh, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, 221005 India. Mobile:9936847575,E-Mail: vp_singh56@yahoo.co.in Prof. Pradyumna Ghosh, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, 221005 India. Mobile:9415256256,E-Mail:pghosh.mec@iitbhu.ac.in

Date.07-01-2019 (Arun Kumar Tiwari)

Place: Lucknow